- 3 -
Package Contents
• Bifinett KH 1156 kitchen scale
y
•Bowl
u
• 2 x CR 2032 Lithium batteries
• Instructions for use
Operation
Inserting the batteries
The batteries are already installed before delivery.
You only need to remove the plastic strip from the
battery holder in the lid of the battery compartment.
When you want to change the batteries proceed as
follows:
• Open the battery compartment lid on the bottom
of the scales.
• Remove the old batteries from the battery holder
in the battery compartment lid.
• Place two CR 2032 Lithium batteries on top of
each other into the battery holder. Make sure that
the side marked with a + sign is facing upwards.
• Close the battery compartment lid so that it locks
into place.
Poison Hazard!
Batteries can be swallowed by children and cause
impairment of health. Keep batteries out of the re-
ach of children.
Warning!
Pay attention to the correct polarity when exchan-
ging batteries. Incorrect battery exchange could
lead to the danger of an explosion Only exchange
batteries for identical or equivalent types.
Weighing
If you switch the scale on and then place the
bowl
u
on the weighing plate, the weight of
the bowl will be shown.
• If you place the bowl on the scale and then
switch the scale on, the weight of the bowl is not
shown.
• If the display
t
does not automatically show
„0“, press once on the Z/T-Button
w
‚
³ Place the bowl on the weighing plate
³ Press the On/Off-Button
q
, to switch the scale
on.
³ Select the desired measurement units
(gramm/ounce). To do this, press the KG/LB-But-
ton
r
.
You can choose between the metric and the
Anglo-American (Imperial) system. The selec-
ted unit appears under the weight-details in the
dis-play. From 0g-999g the unit is shown in
g/oz and from 999g in kg/lbs and g/oz.
The scale shows the weight "0".
³ Place the item(s) to be weighed into the bowl.
The weight is shown on the display.
If you would like to switch the display between
grammes and ounces, press the KG/LB-Button
r
.
Adding & Weighing (Tare Function)
You can repeatedly set the scale back to 0 in order
to weigh additional partial quantities.
³ To do this, press the Z/T-Button once
w
. The
scale shows 0 Gramm again.
³ Place the item(s) to be weighed in the bowl.
In the display, the weight of the newly placed
item(s) is shown.
You can repeat this procedure several times.
However, never place more than 11 lb on the
scale.