Avent SCF332/31 Användarmanual

Kategori
Bröstpumpar
Typ
Användarmanual

Denna manual är också lämplig för

SCF334, SCF332
SCF334, SCF332
SCF334
Fig. A
SCF332
1 2 4 5
14
15
16
17
18
13
7
6
8 10 11
12
3
9
3
5 min.
4
25
19.5
27
5
6
7 8
1
2
4X AA
14
18
16
20
13
17
15
19
9 10 11 12
21 22 23 24
English 6
Dansk 29
Norsk 53
Suomi 76
Svenska 98
Contents
Introduction ________________________________________________________________ 7
General description (Fig. A) ____________________________________________________ 7
Intended use _______________________________________________________________ 8
Important safety information __________________________________________________ 8
Contraindications ____________________________________________________________ 8
Warning ____________________________________________________________________ 8
Caution ___________________________________________________________________ 10
Preparing for use ___________________________________________________________ 10
Cleaning and sanitizing ______________________________________________________ 10
Find the best cushion for you _________________________________________________ 12
Assembling the breast pump _________________________________________________ 12
Using the breast pump ______________________________________________________ 13
When to express milk _______________________________________________________ 13
Tips ______________________________________________________________________ 14
Operating the breast pump ___________________________________________________ 14
Storing breast milk __________________________________________________________ 15
Compatibility ______________________________________________________________ 15
Feeding ___________________________________________________________________ 16
For your child‘s safety and health _____________________________________________ 16
Warning ___________________________________________________________________ 16
Before rst use _____________________________________________________________ 16
Cleaning bottles ____________________________________________________________ 17
Assembling bottles _________________________________________________________ 17
Heating breast milk _________________________________________________________ 17
Maintenance and storage of bottles ___________________________________________ 17
Additional information _______________________________________________________ 18
Choosing the right teat for your baby___________________________________________ 18
Replacement ______________________________________________________________ 18
Batteries __________________________________________________________________ 18
Removing the batteries ______________________________________________________ 19
Ordering accessories ________________________________________________________ 19
Additional items ____________________________________________________________ 19
Warranty and support _______________________________________________________ 19
Troubleshooting ____________________________________________________________ 19
Supplemental information ___________________________________________________ 21
Technical information _______________________________________________________ 21
EMC information ___________________________________________________________ 21
Usage and storage conditions _________________________________________________ 25
Technical specications ______________________________________________________ 26
Explanation of symbols ______________________________________________________ 27
6
English
Introduction
Congratulations on your purchase and welcome to Philips Avent! To fully benet from the support
that Philips Avent oers, register your product at www.philips.com/welcome.
The Philips Avent breast pump has a unique design that enables you to sit in a more comfortable
position while expressing. The soft massage cushion* is designed to feel soft and warm and to mimic
your baby’s suckling action to provide milk ow - comfortably and gently. The breast pump starts in
a gentle mode that helps to stimulate your milk ow. You can then choose from three suction modes,
according to your own personal comfort. The pump is easy to assemble and operate and all parts that
come into contact with breast milk are dishwasher-safe.
Healthcare professionals say that breast milk is the best nutrition for babies during the rst year,
combined with solid food after the rst 6 months. Your breast milk is specially adapted to your baby’s
needs and help protect your baby against infection and allergies. A breast pump can help you to
breastfeed longer. You can express and store your milk so that your baby can still enjoy the benets,
even if you cannot be there to provide it yourself. As the pump is compact, quiet and discrete to
use, you can take it with you anywhere, allowing you to express milk at your own convenience and
maintain your milk supply.
This breast pump is for household use only.
*The cushions included with this pump were designed to comfortably t the majority of mothers.
However, if you need it, you can buy a larger cushion separately.
General description (Fig. A)
Figure A. The numbers mentioned below refer to the numbers on the gure of the front foldout
page of this user manual.
1 Motor unit with silicone tube and cap *
2 Silicone diaphragm *
3 Pump body *
4 Massage cushion *
5 Cover *
6 Battery housing (single electric breast pump only)
7 On/o button
8 Stimulation button
9 Low suction button
10 Medium suction button
11 Deep suction button
12 Adapter
13 White valve *
14 Philips Avent Natural bottle *
15 Dome cap *
16 Screw ring *
17 Nipple *
18 Sealing disc *
*Note:The twin electric breast pump comes with two pieces of the marked parts, except for the
motor unit.
SCF332 contains: Single electric breast pump (including bottle), breast pads.
SCF334 contains: Twin electric breast pump (including two bottles), breast pads, travel bag.
7
English
Intended use
The Philips Avent Comfort Single/Twin electric breast pump is intended to express and collect milk
from the breast of a lactating woman.
The device is intended for a single user.
Important safety information
Read this user manual carefully before you use the breast pump and save it for future reference.
This user manual can also be found online via the Philips Avent website: www.philips.com/avent
Contraindications
Never use the breast pump while you are pregnant, as pumping can induce labor.
Warning
Warnings to avoid choking, strangulation and injury:
- Do not allow children or pets to play with the motor unit, the
adapter or accessories.
- Children should be supervised to ensure that they do not play
with the appliance.
- Always unplug the breast pump immediately after use.
- Do not leave the breast pump unattended when it is plugged in.
- This breast pump is not intended for use by persons (including
children) with reduced physical, sensory or mental capabilities,
or lack of experience and knowledge. Such persons can only
use this breast pump if they are supervised by or have received
proper instruction concerning use of the appliance by a person
responsible for their safety.
Warnings to avoid electric shock:
- Inspect the breast pump, including the adapter, for signs of
damage before each use.
Do not use the breast pump if the adapter or plug is damaged,
if it does not work properly or if it has been dropped or
submerged in water.
Warnings to prevent burns:
- Only use the adapter indicated on the appliance to prevent
overheating of the adapter.
- Non-rechargable batteries are not to be recharged to prevent
overheating and leaking of batteries.
8
English
Warnings to avoid poisoning and contamination and to ensure
hygiene:
- For hygienic reasons, the breast pump is only intended for
repeated use by a single user.
- Clean, rinse and sanitize all pump parts, except the motor unit,
the tube and cap and the adapter, before each use.
- Only store breast milk collected with a cleaned and sanitized pump.
- Do not use the breast pump if the silicone diaphragm appears
to be damaged or broken. See chapter ‘Ordering accessories’ for
information on how to obtain replacement parts.
- Do not use antibacterial or abrasive cleaning agents when you
clean breast pump parts.
- If you are not going use the appliance for a long period of time,
remove the batteries to prevent leaking of batteries.
Warnings to avoid breast and nipple problems and pain:
- Do not attempt to remove the pump body from your breast
while under vacuum. Switch o the appliance and break the
seal between your breast and the pump funnel with your nger.
Remove the pump from your breast.
- Never use the breast pump while you are sleepy or drowsy to
avoid lack of attention during use.
- Always switch o the breast pump before you remove the pump
body from your breast to release the vacuum.
- Never use any accessories or parts from other manufacturers or
that Philips Avent does not specically recommend. This could
lead to improper working of the appliance and could inuence
Electromagnetic Compatibility (EMC). If you use such accessories
or parts, your warranty becomes invalid.
- Do not continue pumping for more than ve minutes at a time
if you do not succeed in expressing any milk. Try to express at
another time during the day.
- If the process becomes very uncomfortable or painful, stop using
the pump and consult your breastfeeding advisor.
- If the pressure generated is uncomfortable or causes pain, switch
o the appliance, break the seal between the breast and the pump
body with your nger and remove the pump from your breast.
- Never drop or insert any foreign object into any opening.
9
English
Caution
Caution to prevent damage to and malfunctioning of the product:
- Prevent the adapter and motor unit from coming into contact with
water.
- Keep the adapter and the silicone tubes away from heated
surfaces to avoid overheating and deformation of these parts.
- Never put the motor unit or the adapter in water, in a dishwasher
or in a sanitizer.
- Although the breast pump is compliant with applicable EMC
directives, it may still be susceptible to excessive emissions and/
or may interfere with other equipment.
A consequence can be that the breast pump switches o or goes
into error mode.
To prevent interference, keep other electric equipment away from
the breast pump
during expressing (see ‚Technical information‘).
- There are no user serviceable parts inside the motor unit of the
breast pump. No modication of equipment is allowed. If you do,
your warranty becomes invalid.
- Do not short-cut the supply terminals of the batteries.
Preparing for use
Cleaning and sanitizing
The motor unit, the silicone tube, cap and the adapter do not require cleaning and sanitizing, as they do
not come into contact with breast milk. Clean and sanitize all other parts of the breast pump before rst
use. Also clean these parts after each subsequent use and sanitize them before each subsequent use.
Caution: Never put the motor unit or the adapter in water, in a dishwasher or in a sanitizer, as this
causes permanent damage to these parts.
Cleanable parts
Clean the following parts before (rst) use and after each subsequent use. Please check the list in the
General Description section to see which items are included with your breast pump.
English
10
Breast pump parts:
- Silicone diaphragm
- Pump body
- Massage cushion
- White valve
- Cover
Bottle parts:
- Philips Avent Natural bottle
- Dome cap
- Screw ring
- Teat
- Sealing disc
Supplies needed for cleaning:
Washing in sink Washing in dishwasher
- Mild dishwashing liquid - Mild dishwashing liquid/tablet
- High quality drinking water - High quality drinking water
- Soft brush or clean dish towel
- Clean sink or bowl
Warning: Do not use antibacterial or abrasive cleaning agents when you are cleaning.
1 Disassemble the breast pump and bottle completely. Also remove the white valve from the breast
pump.
Caution: Be careful when you remove the white valve and when you clean it. If it gets damaged,
your breast pump does not function properly. To remove the white valve, gently pull at the
ribbed tab on the side of the valve.
2 Wash the parts in the sink or dishwasher.
Washing in sink: Detach all parts and soak for 5 minutes in hot water with some mild dishwashing
liquid. Clean all parts with a soft brush or clean dish towel and then rinse them thoroughly (Fig. 3).
Washing in dishwasher: Clean the parts, except the motor unit, the silicone tube and cap and the
adapter, in the dishwasher (on the top rack only).
Note: To clean the valve, rub it gently between your ngers in warm water with some washing-up
liquid. Do not insert objects into the valve, as this may cause damage.
Disinfection (optional)
After cleaning, if you also want to disinfect, you can boil the parts in water in a household pot.
English
11
Supplies needed for disinfection:
- A household pot
- High-quality drinking water
Disinfect the parts in the following way:
Fill a household pot with enough water to cover all parts. Bring the water to boil. Place the parts
in the household pot and boil them for 5 minutes (Fig. 4). During disinfection with boiling water,
prevent the bottle or other parts from touching the side of the pan. This can cause irreversible product
deformation or damage that Philips cannot be held liable for.
Allow water to cool and gently remove the parts from the water. Place the parts neatly on a clean
paper towel or in a clean drying rack and allow them to air dry. Avoid using cloth towels to dry the
parts because they can carry germs and bacteria that are harmful to your baby.
Find the best cushion for you
Expressing breast milk should be comfortable. Therefore we oer 2 soft exible cushions:
a 19.5 mm massage cushion (supplied with your breast pump) and a 25 mm massage cushion.
For optimal comfort and performance, you should choose the optimal cushion for your nipples
(Fig. 5).
19,5 mm: Massage cushion,
25 mm: Massage cushion (not included):
1 Start with the standard 19,5 mm massage cushion supplied with your breast pump. You can nd
the size of the cushion on the cushion itself.
2 If the cushion is too small, purchase the larger 25 mm cushion (see ‘Ordering accessories’).
A too small cushion can cause pain or less eective expression (g. 6).
Assembling the breast pump
Note: Make sure you have cleaned and sanitized the appropriate parts of the breast pump.
1 Wash your hands thoroughly before you handle the cleaned parts.
Warning: Be careful, the cleaned parts may still be hot. Only start assembling the
breast pump when cleaned parts have cooled down.
Note: You may nd it easier to assemble the breast pump while it is wet.
2 Insert the white valve into the pump body from underneath. Push the valve in as far as possible
(Fig. 7).
3 Screw the pump body clockwise onto the bottle until it is securely xed (Fig. 8).
4 Insert the silicone diaphragm into the pump body from above. Make sure it ts securely around the
rim by pressing down with your ngers to ensure a perfect seal (Fig. 9).
5 Insert the cushion into the funnel-shaped section of the pump body (Fig. 10).
6 Push in the inner part of the cushion as far as possible and make sure that it is perfectly sealed all
around the rim of the pump body (Fig. 11).
English
12
7 Press in between the petals to remove any trapped air (Fig. 12).
Note: Place the cover over the cushion to keep the breast pump clean while you prepare for
expressing.
Warning: Always use the breast pump with a cushion.
8 Insert the adapter into the wall socket and insert the plug at the other end into the motor unit
(Fig. 13).
The adapter reference code is indicated on the bottom of the appliance. Only use the indicated
adapter with the appliance.
- For battery operation (single electric breast pump only), turn the bottom of the motor unit in the
direction indicated by the marks on the bottom (step 1 (Fig. 14)) and remove it (step 2 (Fig. 14)).
Insert four new 1.5V AA batteries (or 1.2V, in case of rechargeable batteries) into the battery
housing. Check the markings on the housing of the battery for the correct polarity. Reattach the
bottom to the motor unit.
Note: A new set of batteries provides 1-3 hours of operating time. Rechargeable batteries will lose
capacity over time and may cause a decrease in operating time.
Note: If you have inserted batteries in the battery housing of the motor unit and plug in the adapter,
the breast pump will run from on electrical power. The batteries cannot be charged in the unit.
Warning: Do not mix dierent type of batteries.
Warning: Do not mix used and new batteries.
9 Attach the silicone tube and cap onto the diaphragm. Push down the cap until it is securely in
place (Fig. 15).
Using the breast pump
When to express milk
If breastfeeding goes well, it is advisable (unless advised otherwise by your healthcare professional/
breastfeeding advisor) to wait until your milk supply and breastfeeding schedule are established
(normally at least 2 to 4 weeks after giving birth) before you start expressing.
Exceptions:
- If breastfeeding does not go well immediately, expressing regularly can help to establish and
maintain your milk supply.
- If you are expressing milk for your baby to be given in hospital.
- If your breasts are engorged (painful or swollen), you can express a small amount of milk before or
between feeds to ease the pain and to help your baby latch on more easily.
- If you have sore or cracked nipples, you may wish to express your milk until they are healed.
- If you are separated from your baby and wish to continue to breastfeed when you are reunited,
you should express your milk regularly to stimulate your milk supply.
You need to nd the optimum times of the day to express your milk, for example just before or after
your baby’s rst feed in the morning when your breasts are full, or after a feed if your baby has not
emptied both breasts. If you have returned to work, you may need to express during a break. Using
a breast pump requires practice and it may take several attempts before you succeed. Fortunately,
the Philips Avent electric breast pump is easy to assemble and use so you will soon get used to
expressing with it.
English
13
Tips
- Familiarize yourself with the breast pump and how to operate it before you use it for the rst time.
- Choose a time when you are not in a rush and will not be interrupted.
- A photograph of your baby can help encourage the ‘let-down’ reex.
- Warmth can also help: try to express after a bath or shower, or place a warm cloth or Philips Avent
Thermopad on the breast for a few minutes before you start expressing.
- You may nd it easier to express while your baby is feeding from the other breast,
or immediately after a feed.
- If expressing becomes painful, stop and consult your breastfeeding advisor or healthcare
professional.
Operating the breast pump
1 Wash your hands thoroughly and make sure your breasts are clean.
2 Relax in a comfortable chair (you may wish to use cushions to support your back).
Make sure you have a glass of water nearby.
3 Press the assembled pump body against your breast. Make sure that your nipple is centered,
so that the massage cushion creates an airtight seal (Fig. 16).
For twin electric breast pump users: The twin electric breast pump enables you to express milk
from both breasts at the same time. However, you can also use the appliance to express from
one breast in just the same way. Attach both assembled pump bodies to the silicone tube and cap.
We recommend to place the cover over the other one.
4 Make sure that your nipple ts correctly in the cushion. See for correct size of cushion, section
„Find the best cushion for you“.
5 Press the on/o button (Fig. 17).
- The breast pump automatically starts up in stimulation mode and the on/o button and the
stimulation button light up.
- You begin to feel the suction on your breast.
6 Once your milk starts owing, you can adopt a slower rhythm by pressing the lowest suction button
(Fig. 18).
- This button lights up instead of the stimulation button.
Note: Do not worry if your milk does not ow immediately. Relax and continue pumping.
The rst few times you use the breast pump, you may need to use a higher suction mode to get
your milk owing.
7 Depending on your own personal comfort, you may wish to use a higher suction mode that
provides deeper suction. You can always return to a lower suction mode (Fig. 19).
You can turn o the breast pump whenever you like by pressing the on/o button (Fig. 20).
Note: You do not need to use all suction modes, only use the modes that are comfortable for you.
Warning: Always turn o the breast pump before you remove the pump body from
your breast to release the vacuum.
Warning: Do not continue pumping for more than 5 minutes at a time if you do not
succeed in expressing any milk. Try to express at another time during the day.
8 On average, you need to pump for 10 minutes to express 60-125ml (2-4 oz) of breast milk from
one breast. However, this is just an indication and varies from woman to woman.
Note: If you regularly express more than 125ml per session, you can purchase and use a 260ml/9
oz Philips Avent bottle to prevent overlling and spillage.
English
14
9 When you have nished expressing, turn o the breast pump (Fig. 20) and carefully remove the
pump body from your breast.
10 Unscrew the bottle from the pump body. You have multiple options:
- Insert a sanitized sealing disc into a sanitized screw ring and screw this onto the bottle (Fig. 21).
The expressed milk in the bottle is ready for storage.
- Alternatively, assemble a sanitized nipple and screw ring onto the bottle according to the
instructions (see ‚Feeding‘). Seal the nipple with the dome cap (Fig. 22).
11 Unplug the adapter from the wall outlet to disconnect the appliance from the electrical power.
Unplug the motor unit from the adapter. Unplug the silicone tube and cap from the silicone
diaphragm. For easy storage, wrap the silicone tube around the motor unit and clip the cap onto
the tube (Fig. 23).
12 Clean the other used parts of the breast pump according to the instructions in section ‘Cleaning
and sanitizing’.
Storing breast milk
Warning: Only store breast milk collected with a cleaned and sanitized pump to ensure
hygiene.
Breast milk can be stored in the fridge (not in the door) for up to 48 hours. Expressed milk should be
refrigerated immediately. If you store milk in the fridge to add to during the day, only add milk that
has been expressed into a sanitized bottle or storage cup. Breast milk can be stored in the freezer for
up to three months as long as it is kept in either sanitized bottles tted with a sanitized screw ring and
sealing disc or sanitized storage cups. Clearly label the bottle or storage cup with the date and time of
expression and use older breast milk rst. If you intend to feed your baby with the expressed breast
milk within 48 hours, you can store the breast milk in the fridge in an assembled Philips Avent bottle or
storage cup.
Do’s
- Always refrigerate or freeze expressed milk immediately.
- Only store milk collected with a sanitized breast pump in sanitized bottles.
Don’ts
- Never refreeze thawed breast milk.
- Never add fresh breast milk to frozen breast milk.
Compatibility
The Philips Avent electric breast pump is compatible with Philips Avent bottles in our range and
Philips Avent Storage cups. When you use other Philips Avent bottles, use the same type of nipple
that was supplied with that bottle. For details on how to assemble the nipple and general cleaning
instructions, see section ‚Feeding‘ and section ‚Cleaning‘. These details can also be found on our
website, www.philips.com/support.
- Spare nipples are available separately. Make sure you use a nipple with the correct ow rate when
you feed your baby. To buy accessories or spare parts, visit www.shop.philips.com/service or go to
your Philips dealer. You can also contact the Philips Consumer Care Center in your country.
- Do not mix Philips Avent Anti-colic bottle parts and nipples with parts of the Philips Avent Natural
bottles. They may not t and could cause leakage or other issues.
- The high-quality plastic Philips Avent Natural bottle is compatible with most Philips Avent breast
pumps, spouts, sealing discs and cup tops.
English
15
Feeding
You can feed your baby with breast milk from Philips Avent bottles and storage cups.
For your child‘s safety and health
Warning
Warnings to prevent harm to children:
- Always use bottles and nipples with adult supervision. Do not
allow your child to play with small parts or walk/run while using
bottles or cups.
- Never use feeding nipples as a soother, to prevent choking
hazard.
- Continuous and prolonged sucking of uids will cause tooth
decay.
- Always check the temperature of the food before you feed your
baby to prevent burns.
- Throw away any part at the rst signs of damage or weakness.
- Keep all components not in use out of the reach of children.
- Do not alter the product or parts of it in any way. This may result
in unsafe functioning of the product.
Cautions to avoid damage to the product:
- Do not place in a heated oven, plastic can melt.
- Plastic material properties may be aected by disinfection and
high temperatures. This can aect the t of the dome cap.
- Do not leave a feeding nipple in direct sunlight or heat, or leave
in disinfectant for longer than recommended because this may
damage the product.
Before rst use
Before rst use, disassemble all parts, clean and optionally disinfect the bottle. Inspect the bottle
and feeding nipple before each use and pull the feeding nipple in all directions to prevent a choking
hazard. Throw away at the rst signs of damage or weakness.
English
16
Cleaning bottles
To ensure hygiene, clean the parts of the bottle mentioned in section ‚Cleaning‘ before each use.
Also clean all parts after each subsequent use. You can optionally disinfect by following the
instructions in section ‚Disinfection (optional)‘ .
Make sure that you wash your hands thoroughly and that the surfaces are clean before contact
with cleaned components. Excessive concentration of detergents may eventually cause plastic
components to crack. Should this occur, replace immediately. Inspect the bottle and feeding nipple
before each use and pull the feeding nipple in all directions to prevent a choking hazard. Throw away
any part at the rst signs of damage or weakness.
Assembling bottles
When you assemble the bottle, make sure you place the dome cap vertically onto the bottle so that
the nipple sits upright (Fig. 24). To remove the dome cap, place your hand over the dome cap and
your thumb in the dimple of the dome cap (Fig. 25). The nipple is easier to assemble if you wriggle it
upwards instead of pulling it up in a straight line (Fig. 26). Make sure you pull the nipple through until
its surface is level with the surface of the screw ring (Fig. 27).
Heating breast milk
If you use frozen breast milk, let it defrost completely before you heat it.
Note: In case of an emergency, you can defrost the milk in a bowl of hot water.
Heat the bottle or storage cup with defrosted or refrigerated breast milk in a bowl of hot water or in
a bottle warmer. Remove the screw ring and sealing disc from the bottle or remove the lid from the
storage cup.
Always stir or shake heated food to ensure even heat distribution and test the temperature before
serving. Take extra care when you heat up food in a microwave as heating food in a microwave oven
may produce localized high temperatures.
Note: We do not recommend heating breast milk in the microwave because when breast milk
becomes too warm, nutrients and vitamins are damaged.
Note: You can purchase and use Philips Avent bottle warmer to heat up the milk.
Maintenance and storage of bottles
Inspect the bottle and feeding nipple before each use and pull the feeding nipple in all directions to
prevent a choking hazard. Throw away at the rst signs of damage or weakness. For hygiene reasons,
we recommend replacing nipples after 3 months. Keep nipples in a dry, covered container. When not
in use, do not leave the nipples in sunlight or heat, or leave in disinfectant (‚sterilizing solution‘) for
longer than recommended, as this may weaken the nipple. Do not place in a heated oven. Store the
bottles in a dry location.
English
17
Additional information
The Philips Avent nipples are available with dierent ow rates to help your baby with drinking.
Over time, you can change the nipple to accomodate the individual needs of your baby.
Choosing the right teat for your baby
The Philips Avent teats are available with dierent ow rates to help your baby with drinking. Over time
you can change the teat accommodating the individual needs of your baby. Philips Avent teats are clearly
numbered on the side to indicate ow rate (see image). Make sure you use a teat with the correct ow
rate when you feed your baby. Use a lower ow rate if your baby chokes, is leaking milk or has trouble
adjusting to the drinking speed. Use a higher ow rate if your baby falls asleep during feeding, gets
frustrated or when feeding takes a very long time.
Teats are available for 0m, 0m+, 1m+, 3m+, 6m+, variable ow (I/II/III) and thick feed (Y).
(0) The teat for 0m can be used from day one. Extra soft silicone teat and it is the lowest ow rate
available. Ideal for newborn and breastfed babies of all ages. The teat only has one opening for uids
and the number 0 is shown on the teat.
(1) The teat for 0m+ has an extra soft silicone teat. Ideal for newborn and breastfed babies of all ages.
The number 1 is shown on the teat.
(2) The teat for 1m+ has an extra soft silicone teat. Ideal for breastfed babies of all ages.
The number 2 is shown on the teat.
(3) The teat for 3m+ has an extra soft silicone teat. For bottle fed babies at 3 months of age and up.
The number 3 is shown on the teat.
(4) The teat for 6m+ has a bite resistant silicone teat. The sturdier teat is ideal for bottle fed babies
at 6 months of age and up. The number 4 is shown on the teat.
(I/II/III) Variable ow: has a bite resistant silicone teat. The sturdier teat, with an adjustable ow rate
to babies convenience is ideal for bottle fed babies at 3 months of age and up. The teat has one slot
cut on the top for uid and the markings I, II, III on the edges of the teat.
(Y) Thick feed: has a bite resistant silicone teat. The sturdier teat, designed for thicker feeds is ideal
for bottle fed babies at 6 months of age and up. The teat has one Y cut for uid and the symbol Y on
the teat.
Note: Every baby is unique and your baby‘s individual needs may vary from the description of ow rates.
Note: Teat (0) might not be available in your country, please check www.philips.com/avent.
Replacement
Batteries
When using the breast pump (single electric breast pump) on batteries, always use four 1.5 AA
batteries (or 1.2V in case of rechargeable batteries). Remove the rechargeable batteries from the motor
unit before charging them.
Remove exhausted batteries and dispose of them safely, see chapter ‚Recycling‘.
For instructions on how to replace the batteries, see chapter ‘Preparing for use’.
English
18
Recycling
- This symbol means that this product shall not be disposed of with normal household waste
(2012/19/EU) (Fig. 28).
- This symbol means that this product contains rechargeable and disposable batteries which shall
not be disposed of with normal household waste. (2006/66/EC) (Fig. 29). Please take your
product to an ocial collection point or a Philips service center to have a professional remove
the rechargeable battery.
- Follow your country’s rules for the separate collection of electrical and electronic products,
and rechargeable and disposable batteries. Correct disposal helps prevent negative consequences
for the environment and human health.
Removing the batteries
Follow the steps below to remove batteries from the appliance (single electric breast pump only).
1 Before removing the batteries, make sure the motor unit is turned o and the adapter is unplugged.
2 To remove the batteries, turn the bottom of the motor unit in the direction indicated by the marks
on the bottom (step 1) and remove it (step 2 (Fig. 30)).
3 Remove the four 1.5V AA batteries (or 1.2V in case of rechargeable batteries) from the battery
housing.
4 Reattach the bottom to the motor unit.
Ordering accessories
To buy accessories or spare parts, visit www.shop.philips.com/service or go to your Philips dealer.
You can also contact the Philips Consumer Care Center in your country (see the international warranty
leaet for contact details).
Additional items
The following items may be included. Please check the list in the section General Description to see
which items are included with your breast pump.
- Disposable breast pads
- Cover
- Sealing discs
- Travel bag
Warranty and support
If you need information or support, please visit www.philips.com/support or read the international
warranty leaet.
Troubleshooting
This chapter summarizes the most common problems you could encounter with the appliance.
If you are unable to solve the problem with the information below, visit
www.philips.com/support for a list of frequently asked questions or contact the Consumer Care
Center in your country.
English
19
Problem Solution
I experience pain when I
use the breast pump
Stop using the breast pump and consult your breastfeeding
advisor. If the pump does not come away easily from the breast,
it may be necessary to break the vacuum by placing a nger
between the breast and Massage Cushion.
The breast pump is
scratched
In case of regular use, some light scratching is normal and does not
cause problems. However, if a part of the breast pump becomes
badly scratched or cracks, stop using the breast pump and contact
the Philips Consumer Care Center or visit www.shop.philips.com/
service to obtain a replacement part. Be aware that combinations
of detergents, cleaning products, sanitizing solution, softened water
and temperature uctuations may, under certain circumstances,
cause the plastic to crack. Avoid contact with abrasive or
antibacterial detergents as these can damage the plastic.
The breast pump does
not work and the on/o
button ashes.
First check if you have assembled the breast pump correctly and
make sure that there is no kink in the tube.To prevent interference
keep other electric equipment, like mobile phone or laptop, away
from the breast pump while expressing.If you are using the single
electric breast pump with batteries, replace the batteries according
to the instructions in the user manual.If you are using the breast
pump on electrical power, check to make sure you are using the
adapter that was supplied with the product.If the problem persists,
contact the Consumer Care center via www.philips.com/support.
I do not feel any suction. Check if you have assembled the breast pump correctly by
following the steps in section 'preparing for use'. Make sure that
the silicone tube is rmly attached to the motor unit and to the
cap and diaphragm.Also make sure that the pump is positioned
correctly on the breast to allow for vacuum to occur. If you still do
not feel any suction, please contact the Consumer Care center via
www.philips.com/support.
The pump has too much
suction.
Follow below guidelines if you experience too much suction with
your breast pump:
- Make sure you only use the Philips Avent comfort breast
pump’s parts.
- Make sure you have assembled the comfort breast pump with
the massage cushion: not using the massage cushion can result
in too much vacuum.
- When using a breast pump for the rst time, you may
experience the suction level as too high at rst. Practicing can
help. If the problem persists, consult your breastfeeding advisor.
English
20
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120
  • Page 121 121
  • Page 122 122
  • Page 123 123
  • Page 124 124

Avent SCF332/31 Användarmanual

Kategori
Bröstpumpar
Typ
Användarmanual
Denna manual är också lämplig för