Sony XR-C7220R Användarmanual

Operating Instructions

Manual de instrucciones

Bruksanvisning

Manual de instruções

 1999 by Sony Corporation

GB

ES

PT

SE

FM/MW/LW

Cassette

Car Stereo

XR-C8220R

XR-C7220R

For installation and connections, see the supplied installation/connections

manual.

Para obtener información sobre la instalación y las conexiones, consulte el manual

de instalación/conexiones suministrado.

Vi hänvisar till det medföljande häftet angående montering/anslutningar.

Para a instalação e as ligações, consulte o manual de instalação/ligações

fornecido.

XR-C8220R/C7220R

2

Welcome !

Thank you for purchasing this Sony Cassette

Player. This unit lets you enjoy a variety of

features as well as a supplied rotary

commander or an optional wireless remote.

In addition to the cassette playback and radio

operations, you can expand your system by

connecting an optional CD/MD unit*

1

.

When you connect an optional CD unit with

the CD TEXT function, the CD TEXT

information will appear in the display when

you play a CD TEXT disc*

2

.

*

1

You can connect a CD changer, an MD changer,

a CD player, or an MD player.

*

2

A CD TEXT disc is an audio CD that includes

information such as the disc name, artist name,

and track names.

This information is recorded on the disc.

Voice guide for safe driving

(XR-C8220R only)

This unit has a voice guide function*. When

the voice guide function is on, the unit gives

vocalized comments on functions

corresponding to the relevant button pushed.

These comments can be vocalized in either

English or Spanish.

* Some optional power amplifiers may cause a

break at the beginning of vocalized comments.

When you connect an optional MD changer, the

sound from the first MD may continue for a short

time even after the vocalized comments about

the second MD are announced.

3

Table of Contents

This Unit Only With Optional Equipment

Location of controls ................................................. 4

Getting Started

Resetting the unit ................................................ 6

Detaching the front panel .................................. 6

Setting the clock .................................................. 7

Cassette Player

Listening to a tape ............................................... 8

Playing a tape in various modes ....................... 9

Radio

Memorizing stations automatically

— Best Tuning Memory (BTM) ................. 10

Memorizing only the desired stations ........... 11

Receiving the memorized stations.................. 11

RDS

Overview of the RDS function ........................ 12

Displaying the station name ............................ 12

Retuning to the same programme

automatically

— Alternative Frequencies (AF) ................ 12

Listening to traffic announcements ................ 14

Presetting the RDS stations with

the AF and TA data ..................................... 15

Recording the traffic announcements

(XR-C8220R only)

—Traffic Information Replay (TIR) ........... 15

Locating a station by programme type .......... 17

Setting the clock automatically ....................... 18

Other Functions

Labelling the rotary commander .................... 18

Using the rotary commander .......................... 19

Adjusting the sound characteristics ............... 20

Attenuating the sound ..................................... 20

Changing the sound and display settings ..... 21

Adjusting the frequency of the subwoofer(s)

(XR-C8220R only) ........................................ 21

Adjusting the sound and frequency of the

equalizer preamplifier

(XR-C8220R only) ........................................ 22

Changing the line output level

(XR-C8220R only) ........................................ 22

CD/MD Unit

Playing a CD or MD ......................................... 23

Playing tracks repeatedly

— Repeat Play .............................................. 24

Playing tracks in random order

— Shuffle Play .............................................. 24

Creating a programme (XR-C8220R only)

— Programme Memory .............................. 25

Labelling a CD

— Disc Memo ............................................... 27

Locating a disc by name

— List-up ...................................................... 29

Selecting specific tracks for playback

— Bank .......................................................... 29

Additional Information

Precautions ......................................................... 30

Maintenance....................................................... 31

Dismounting the unit ....................................... 32

Specifications ..................................................... 33

Troubleshooting guide ..................................... 34

4

S

E

K

/

A

M

S

MODE

OFF

SOUND

DSPL

PTY

LIST

OPEN

AF/TA

SOURCE

SHIFT

12345678910

TIR

XR-C8220R

Location of controls

Refer to the listed pages for details.

1 SEEK/AMS (seek/Automatic Music

Sensor/manual search) control

9, 11, 13, 16, 17, 24, 25, 26, 29

2 MODE (*)button

During tape reception:

Playback direction change 8, 9

During radio reception:

BAND select 10, 11

During CD or MD playback:

CD/MD Unit select 23, 25, 28

3 SOURCE (TAPE/TUNER/CD/MD) button

8, 10, 11, 14, 21, 23, 25, 28

4 Dial (volume/equalizer curve*/listening

position*/subwoofer volume*/cut-off

frequency*/bass/treble/left-right/rear-

front control) 7, 15, 20, 27, 28

5 SOUND button 20

6 DSPL (display mode change) button

9, 11, 12, 23, 28, 29

7 Display window

8

6 (eject) button (located on the front

side of the unit behind the front panel) 8

9 Reset button (located on the front side

of the unit behind the front panel) 6

!º OPEN button 6, 8, 32

!¡ PTY/LIST button

RDS Programme 17

Disc Memo 27, 28

List-up 29

!™ AF/TA button 12, 13, 14, 15

!£ OFF button 6, 8

!¢ Receptor for the optional wireless

remote

!∞ SHIFT button

PLAY MODE 9, 10, 11, 13, 15, 25, 26, 27,

29, 30

REP 10, 24

SET UP 7, 18, 21, 22, 23

SHUF 24

!§ POWER SELECT switch

(located on the bottom of the unit)

See “POWER SELECT switch” in the

Installation/Connections manual.

!¶ During radio reception:

Number buttons 11, 13, 15, 16

During CD or MD playback:

Direct disc selection buttons

24, 25, 26, 29

!• TIR button* 15, 16

* XR-C8220R only

5

Optional wireless

remote (RM-X47)

The corresponding buttons of the

wireless remote control the same

functions as those on the unit.

1 OFF button

2 SEEK/AMS button

3 (–) (+) buttons

4 ATT button

5 SOUND/SEL button

6 DSPL button

7 PRESET/DISC button

You cannot perform manual search and

manual tuning with the remote.

8 SOURCE button

9 MODE/DIR button

When the POWER SELECT switch is set to the B position, the unit cannot be operated with the

wireless remote unless (SOURCE) on the unit is pressed or a cassette is inserted to activate the

unit first.

OFF

SOURCE

DIR

SEL

+

FF

–

REW

SOUND

–

+

ATT DSPL

SEEK

AMS

PRESET

DISC

MODE

6

Attaching the front panel

Place the hole a of the front panel onto the

spindle b on the unit as illustrated, then push

the left side in.

Notes

• Be sure not to attach the front panel upside

down.

• Do not press the front panel too hard against the

unit when attaching it.

• Do not press too hard or put excessive pressure

on the display window of the front panel.

• Do not expose the front panel to direct sunlight

or heat sources such as hot air ducts, and do not

leave it in a humid place. Never leave it on the

dashboard of a car parked in direct sunlight or

where there may be a considerable rise in

temperature.

Getting Started

Resetting the unit

Before operating the unit for the first time or

after replacing the car battery, you must reset

the unit.

Remove the front panel and press the reset

button with a pointed object, such as a

ballpoint pen.

Note

Pressing the reset button will erase the clock

setting and some memorized functions.

Detaching the front panel

You can detach the front panel of this unit to

protect the unit from being stolen.

1 Press (OFF).

2 Press (OPEN), then slide the front panel

to the right side, and pull out from the

left side.

Notes

• Be sure not to drop the panel when detaching it

from the unit.

• If you detach the panel while the unit is still

turned on, the power will turn off automatically

to prevent the speakers from being damaged.

• When you carry the front panel with you, use the

supplied front panel case.

Reset button

1

2

b

a

µ

7

Caution alarm

If you turn the ignition key switch to the OFF

position without removing the front panel, the

caution alarm will beep for a few seconds

(only when the POWER SELECT switch on the

bottom of the unit is set to the A position).

If you connect an optional power amplifier and

do not use the built-in amplifier, the beep

sound will be deactivated.

TIR indicator (XR-C8220R only)

If you pull out the ignition key while the TIR

function is on, the TIR indicator flashes a few

times. (only when the POWER SELECT switch

on the bottom of the unit is set to the A

position).

For more information on the TIR function,

refer to “Recording the traffic announcements”

(page 15).

Setting the clock

The clock uses a 24-hour digital indication.

Example: To set the clock to 10:08

1 Press (SHIFT), then press (3) (SET UP)

repeatedly until “Clock” appears.

1 Press (5) (n).

The hour indication flashes.

2 Set the hour.

3 Press (5) (n).

The minute indication flashes.

4 Set the minute.

continue to next page n

to go forward

to go backward

to go forward

to go backward

SET UP

TIR indicator

8

2 Press (SHIFT).

The clock starts.

3 Press (SHIFT).

After the clock setting is complete, the

display returns to normal playback mode.

Note

If the POWER SELECT switch on the bottom of the

unit is set to the B position, turn the power on

first, then set the clock.

6

Cassette Player

Listening to a tape

1 Press (OPEN) and insert a cassette.

Playback starts automatically.

2 Close the front panel.

If a cassette is already inserted, to start

playback, press (SOURCE) repeatedly until

“FWD” or “REV” appears.

The side facing up is played.

The side facing down is played.

Tips

• To change the tape’s playback direction, press

(MODE) (*).

• ”Metal” appears in the display when you insert a

metal or CrO

2 tape (Auto Metal function).

To Press

Stop playback (OFF)

Eject the cassette (OPEN) then 6

SET UP

9

Fast-winding the tape

During playback, push the SEEK/AMS

control up or down and hold.

To start playback during fast-forwarding or

rewinding, press (MODE) (*).

Locating a specific track

— Automatic Music Sensor (AMS)

During playback, push the SEEK/AMS

control up or down and release, for each

track you want to skip.

You can skip up to nine tracks at one time.

Note

The AMS function may not work when:

— the blanks between tracks are shorter than

four seconds.

— there is noise between tracks.

— there are long sections of low volume or quiet

interludes.

Changing the display item

Each time you press (DSPL), the item changes

as follows:

z Tape playback z Clock z Frequency*

* While either of the following functions are

activated.

— ATA function

— AF/TA function

After you select the desired item, the display

will automatically change to the Motion

Display mode after a few seconds.

In the Motion Display mode, all the above

items are scrolled in the display one by one in

order.

Tip

The Motion Display mode can be turned off. (See

“Changing the sound and display settings” on

page 21.)

To locate

preceding tracks

To locate

succeeding tracks

Rewind

Fast-forward

Playing a tape in various

modes

You can play the tape in various modes:

•NR (Dolby NR) lets you select the Dolby* NR

B system.

•B. Skip (Blank Skip) skips blanks longer than

eight seconds.

•ATA (Automatic Tuner Activation) turns on

the tuner automatically when fast-winding

the tape.

•Repeat (Repeat Play) repeats the current

track.

* Dolby noise reduction manufactured under

license from Dolby Laboratories Licensing

Corporation.

”DOLBY“ and the double-D symbol a are

trademarks of Dolby Laboratories Licensing

Corporation.

1 During playback, press (SHIFT).

2 Press (4) (PLAY MODE) repeatedly until

the desired play mode appears.

Each time you press (4) (PLAY MODE),

the item changes as follows:

NR n B. Skip n ATA

3 Press (5) (n) to select “on.”

The selected play mode starts.

4 Press (SHIFT).

To return to normal playback mode, select

“off” in step 3 above.

A

SHIFT

1234567891

SET UP PLAY MODE

REP

RLAY MODE

10

Radio

Memorizing stations

automatically

— Best Tuning Memory (BTM)

The unit selects the stations with the strongest

signals and memorizes them in the order of

their frequencies. You can store up to 10

stations on each band (FM1, FM2, MW, and

LW).

Caution

When tuning in stations while driving, use

Best Tuning Memory to prevent accidents.

1 Press (SOURCE) repeatedly to select the

tuner.

Each time you press (SOURCE), the source

changes as follows:

z TUNER z CD* z MD* z TAPE

* If the corresponding optional equipment is

not connected, this item will not appear.

2 Press (MODE) repeatedly to select the

band.

Each time you press (MODE), the band

changes as follows:

z FM1 z FM2 z MW z LW

3 Press (SHIFT), then press (4) (PLAY

MODE) repeatedly until “B.T.M” appears.

4 Press (5) (n).

The unit stores stations in the order of their

frequencies on the number buttons.

A beep sounds when the setting is stored.

5 Press (SHIFT).

Notes

• The unit does not store stations with weak

signals. If only a few stations are received, some

number buttons will retain their former setting.

• When a number is already indicated in the

display, the unit stores stations in order from the

one currently displayed.

Playing tracks repeatedly

— Repeat Play

1 During playback, press (SHIFT).

2 Press (7) (REP) repeatedly until ”Repeat

on“ appears.

Repeat Play starts.

3 Press (SHIFT).

To return to normal playback mode, select

“Repeat off” in step 2 above.

DSPL

SHIFT

1234567891

SET UP PLAY MODE

REP

11

Memorizing only the

desired stations

You can preset up to 20 FM stations (10 each

for FM1 and 2), up to 10 MW stations, and up

to 10 LW stations in the order of your choice.

1 Press (SOURCE) repeatedly to select the

tuner.

2 Press (MODE) repeatedly to select the

band.

3 Push the SEEK/AMS control up or down

to tune in the station that you want to

store on the number button.

4 Press and hold the desired number

button ((1) to (10)) until “MEM”

appears.

The number button indication appears in

the display.

Note

If you store a new station on a number button

which already has a station registered, the

previously stored station will be replaced by the

new one.

Receiving the memorized

stations

1 Press (SOURCE) repeatedly to select the

tuner.

2 Press (MODE) repeatedly to select the

band.

3 Press the number button ((1) to (10))

where the desired station is stored.

If you cannot tune in a preset

station

Push and release the SEEK/AMS control

up or down to search for the station

(automatic tuning).

Scanning stops when the unit receives a

station. Push the SEEK/AMS control up or

down repeatedly until the desired station is

received.

Note

If the automatic tuning stops too frequently, press

(SHIFT), then press (4) (PLAY MODE) repeatedly

until “Local” (local seek mode) is displayed. Then

press (5) (n) to select “Local on.” Press (SHIFT).

Only the stations with relatively strong signals will

be tuned in.

Tip

If you know the frequency of the station you want

to listen to, push the SEEK/AMS control up or

down and hold until the desired frequency

appears (manual tuning).

If FM stereo reception is poor

— Monaural Mode

1 During radio reception, press (SHIFT),

then press (4) (PLAY MODE) repeatedly

until “Mono” appears.

2 Press (5) (n) repeatedly until “Mono

on“ appears.

The sound improves, but becomes

monaural (“ST” disappears).

3 Press (SHIFT).

To return to stereo mode, select “Mono off” in

step 2 above.

Changing the display item

Each time you press (DSPL), the item changes

as follows:

Frequency (Station Name)* ˜ Clock

* When you tune in an FM station that transmits

RDS data, the station name appears.

After you select the desired item, the display

will automatically change to the Motion

Display mode after a few seconds.

In the Motion Display mode, all the above

items are scrolled in the display one by one in

order.

Tip

The Motion Display mode can be turned off. (See

“Changing the sound and display settings” on

page 21.)

12

Changing the display item

Each time you press (DSPL), the item changes

as follows:

Station Name/Frequency ˜ Clock

After you select the desired item, the display

will automatically change to the Motion

Display mode after a few seconds.

In the Motion Display mode, all the above

items are scrolled in the display one by one in

order.

Tip

The Motion Display mode can be turned off. (See

“Changing the sound and display settings” on

page 21.)

Note

“NO Name” appears if the received station does

not transmit RDS data.

Retuning to the same

programme automatically

— Alternative Frequencies (AF)

The Alternative Frequencies (AF) function

automatically selects and retunes the station

with the strongest signal in a network. By

using this function, you can continuously

listen to the same programme during a long-

distance drive without having to retune the

station manually.

1 Select an FM station.

2 Press (AF/TA) repeatedly until “AF on”

appears.

The unit starts searching for an alternative

station with a stronger signal in the same

network.

Note

When there is no alternative station in the area or

you do not need to search for an alternative

station, turn the AF function off by pressing

(AF/TA) repeatedly until “AF TA off” appears.

RDS

Overview of the RDS

function

Radio Data System (RDS) is a broadcasting

service that allows FM stations to send

additional digital information along with the

regular radio programme signal. Your car

stereo uses this system to offer you a variety of

services. Here are just a few: retuning to the

same programme automatically, listening to

traffic announcements, and locating a station

by programme type.

Notes

• Depending on the country or region, not all of

the RDS functions are available.

• RDS may not work properly if the signal strength

is weak or if the station you are tuned to is not

transmitting RDS data.

Displaying the station

name

The name of the current station lights up in the

display.

Select an FM station (page 10).

When you tune in an FM station that

transmits RDS data, the station name

appears in the display.

Note

The “*” indication means that an RDS station is

being received.

96.0MHz

98.5MHz

Frequencies change automatically.

Station

102.5MHz

13

Local link function

(United Kingdom only)

The Local Link function lets you select other

local stations in the area, even though they are

not stored on your number buttons.

1 Press a number button that has a local

station stored on it.

2 Within five seconds, press the number

button of the local station again.

3 Repeat this procedure until the desired

local station is received.

Changing the display item

Each time you press (AF/TA), the item changes

as follows:

” AF on ” TA on ” AF TA on*

AF TA off “

* Select this to turn on both the AF and TA

functions.

Notes

• If “NO AF” and the station name flash

alternately, this indicates that the unit cannot

find an alternative station in the network.

• If the station name starts flashing after selecting

a station with the AF function on, this indicates

that no alternative frequency is available. Push

the SEEK/AMS control up or down while the

station name is flashing (within eight seconds).

The unit starts searching for another frequency

with the same PI (Programme Identification) data

(“PI seek” appears and no sound is heard). If the

unit cannot find another frequency, “NO PI”

appears, and the unit returns to the previously

selected frequency.

Listening to a regional programme

The “REG on” (regional on) function lets you

stay tuned to a regional programme without

being switched to another regional station.

(Note that you must turn the AF function on.)

The unit is factory preset to “REG on,” but if

you want to turn off the function, do the

following.

1 During radio reception, press (SHIFT),

then press (4) (PLAY MODE) repeatedly

until “REG” appears.

2 Press (5) (n) repeatedly until “REG off”

appears.

3 Press (SHIFT).

Note that selecting “REG off” might cause

the unit to switch to another regional

station within the same network.

To return to regional on, select “REG on” in

step 2 above.

Note

This function does not work in the United

Kingdom and in some other areas.

14

Presetting the volume of traffic

announcements

You can preset the volume level of the traffic

announcements beforehand so you won’t miss

the announcement. When a traffic

announcement starts, the volume will be

automatically adjusted to the preset level.

1 Select the desired volume level.

2 Press (AF/TA) for two seconds.

”TA“ appears and the setting is stored.

Receiving emergency

announcements

If an emergency announcement comes in while

you are listening to the radio, the programme

will automatically switch to it. If you are

listening to a source other than the radio, the

emergency announcements will be heard if

you set AF or TA to on. The unit will then

automatically switch to these announcements

no matter which source you are listening to at

the time.

Listening to traffic

announcements

The Traffic Announcement (TA) and Traffic

Programme (TP) data let you automatically

tune in an FM station that is broadcasting

traffic announcements even if you are listening

to other programme sources.

Press (AF/TA) repeatedly until “TA on” or

“AF TA on” appears.

The unit starts searching for traffic

information stations. “TP” appears in the

display when the unit finds a station

broadcasting traffic announcements.

When the traffic announcement starts,

“TA” flashes. The flashing stops when the

traffic announcement is over.

Tip

If the traffic announcement starts while you are

listening to another programme source, the unit

automatically switches to the announcement and

goes back to the original source when the

announcement is over.

Notes

•

“NO TP” flashes for five seconds if the received

station does not broadcast traffic announcements.

Then, the unit starts searching for a station that

broadcasts traffic announcements.

• When “EON” appears with “TP” in the display,

the current station makes use of broadcast it by

other stations in the same network.

To cancel the current traffic

announcement

Press (AF/TA) or (SOURCE).

To cancel all traffic announcements, turn off

the function by pressing (AF/TA) until

“AF TA off” appears.

15

Recording the traffic

announcements

(XR-C8220R only)

—Traffic Information Replay (TIR)

You can listen to the latest traffic

announcements by recording them. The unit

automatically records and stores up to eight

traffic announcements. If the recording

exceeds four minutes, the recorded

announcements are updated, so you can

always hear the latest information.

The TIR function turns on the unit

automatically and records the traffic

announcements for up to two hours before and

after a preset time.

Presetting the time and the station

1 Press and hold (TIR) until “TIR” lights up

in the display.

2 Press (5) (n) repeatedly until “TIR␣ on”

appears.

3 Press (TIR) repeatedly until the time

indication appears.

1 Set the hour by rotating the dial.

2 Press (5) (n) until the minute digits

flash.

3 Set the minute by rotating the dial.

continue to next page n

Presetting the RDS

stations with the AF and

TA data

When you preset RDS stations, the unit stores

each station’s data as well as its frequency, so

you don’t have to turn on the AF or TA

function every time you tune in the preset

station. You can select a different setting (AF,

TA, or both) for individual preset stations, or

the same setting for all preset stations.

Presetting the same setting for all

preset stations

1 Select an FM band (page 10).

2 Press (AF/TA) repeatedly to select either

“AF on,” “TA on” or “AF TA on” (for both

AF and TA functions).

Note that selecting “AF TA off” stores not

only RDS stations, but also non-RDS

stations.

3 Press (SHIFT), then press (4) (PLAY

MODE) repeatedly until “B.T.M” appears.

4 Press (5) (n) until “B.T.M” flashes.

5 Press (SHIFT).

Presetting different settings for

each preset station

1 Select an FM band, and tune in the

desired station.

2 Press (AF/TA) repeatedly to select either

“AF on,” “TA on” or “AF TA on” (for both

AF and TA functions).

3 Press the desired number button and

hold until “MEM” appears.

Repeat from step 1 for presetting other

stations.

Tip

If you want to change the preset AF and/or TA

setting after you tune in the preset station, you

can do so by turning the AF or TA function on or

off.

16

Playing back the recorded traffic

announcements

When there are recorded traffic

announcements you have not listened to yet,

t flashes.

1 Press (TIR).

The latest traffic announcement is played

back. To listen to the previous ones, press

(TIR) or push the SEEK/AMS control up.

To replay the announcements, push the

SEEK/AMS control down.

“NO Data” appears if no traffic

announcements were recorded.

2 Press (TIR) to return to the original

programme.

4 Press (TIR).

5 Select the desired station by pressing the

preset number button or pushing the

SEEK/AMS control up or down.

6 Press (TIR) for two seconds to return to

the original display.

t lights up.

The unit turns on automatically and stands

by for traffic announcements for four hours

(two hours before and after the preset

time).

If the preset station does not broadcast the

traffic announcement while searching, the

unit starts searching for other traffic

programme (TP) stations.

To cancel the TIR function

Select “TIR off” in step 2 above.

Tips

• While the unit is recording the traffic

announcement, t and “TA” flash.

• If the unit still cannot find a TP station, it starts a

new search every five minutes until it finds one.

• If you pull out the ignition key while the TIR

function is on, "TIR on" and t flash a few times.

Notes

• The unit also stands by for traffic

announcements for two hours after you turn off

the engine, as long as the TIR function is on.

• If you have a power aerial, it automatically

extends every time the unit searches for a traffic

programme station.

If you have a manual aerial, make sure that the

aerial is fully extended.

• If you do not use your car for about ten days, the

TIR function will turn off automatically to avoid

battery wear, even if the TIR function is on.

SOUND

DSPL

SHIFT

123

SET U

17

1 Press (PTY/LIST) during FM reception

until “PTY” appears.

The current programme type name appears

if the station is transmitting the PTY data.

“- - - - -” appears if the received station is

not an RDS station, or if the RDS data has

not been received.

2 Press (PTY/LIST) repeatedly until the

desired programme type appears.

The programme types appear in the order

shown in the above table. Note that you

cannot select “None” (Not specified) for

searching.

3 Push the SEEK/AMS control up or down.

The unit starts searching for a station

broadcasting the selected programme type.

When the unit finds the programme, the

programme type appears again for five

seconds.

“NO” and the programme type appear

alternately for five seconds if the unit

cannot find the programme type. It then

returns to the previously selected station.

Locating a station by

programme type

You can locate the station you want by

selecting one of the programme types shown

below.

Programme types Display

News News

Current Affairs Affairs

Information Info

Sports Sport

Education Educate

Drama Drama

Culture Culture

Science Science

Varied Varied

Popular Music Pop M

Rock Music Rock M

Easy Listening Easy M

Light Classical Light M

Classical Classics

Other Music Type Other M

Weather Weather

Finance Finance

Children’s programmes Children

Social Affairs Social A

Religion Religion

Phone In Phone In

Travel Travel

Leisure Leisure

Jazz Music Jazz

Country Music Country

National Music Nation M

Oldies Music Oldies

Folk Music Folk M

Documentary Document

Not specified None

Note

You cannot use this function in some countries

where no PTY (Programme Type selection) data is

available.

18

Other Functions

You can also control an optional CD or MD

unit, or equalizer preamplifier* with the rotary

commander.

* XR-C8220R only

Labelling the rotary

commander

Depending on how you mount the rotary

commander, attach the appropriate label as

shown in the illustration below.

Setting the clock

automatically

The CT (Clock Time) data from the RDS

transmission sets the clock automatically.

1 Press (SHIFT), then press (3) (SET UP)

repeatedly until “CT off” appears.

2 Press (5) (n) repeatedly until “CT on”

appears.

The clock is set.

3 Press (SHIFT) to return to the normal

display.

To cancel the CT function

Select “CT off” in step 2 above.

Notes

• The CT function may not work even though an

RDS station is being received.

• There might be a difference between the time

set by the CT function and the actual time.

SET UP

SOUND

LIST

MODE

SOUND

LIST

MODE

19

By rotating the control

(the SEEK/AMS control)

Rotate the control and release it to:

•Locate the beginnings of the tracks on the

tape. Rotate and hold the control

momentarily, then release it to fast-wind

the tape. To start playback while fast-

winding the tape, press (MODE).

•Locate a specific track on a disc. Rotate

and hold the control until you locate the

specific point in a track, then release it to

start playback.

•Tune in stations automatically. Rotate and

hold the control to tune in a specific

station.

By pushing in and rotating the

control (the PRESET/DISC control)

Push in and rotate the control to:

•Receive the stations memorized on the

number buttons.

•Change the disc.

Other operations

continue to next page n

Using the rotary

commander

By pressing buttons

(the SOURCE and MODE buttons)

Each time you press (SOURCE), the

source changes as follows:

TUNER n CD* n MD* n TAPE

Pressing (MODE) changes the operation

in the following ways;

• Tape : transport direction

• Tuner : FM1 n FM2 n MW n LW

• CD unit* : CD1 n CD2 n …

• MD unit* : MD1 n MD2 n …

* If the corresponding optional equipment is

not connected, this item will not appear.

Tip

When the POWER SELECT switch is set to position

B, you can turn on this unit by pressing (SOURCE)

on the rotary commander.

(SOURCE)

(MODE)

Rotate the VOL control to

adjust the volume.

Press (ATT) to

attenuate the

sound.

Press (OFF) to turn

off the unit.

OFF

20

Adjusting the sound

characteristics

You can adjust the equalizer curve, listening

position, cut-off frequency, bass, treble,

balance, and fader.

You can store the bass and treble levels

independently for each source.

1 Select the item you want to adjust by

pressing (SOUND) repeatedly.

VOL (volume) n EQ (equalizer curve)*

1, 2

n POS (listening position)*

1, 2

n SUB (subwoofer volume)*

1

n CNW (Crossover Network)*

1, 2

n BAS (bass) n TRE (treble)

n BAL (left-right) n FAD (front-rear)

*

1

XR-C8220R only

*

2

If the corresponding optional equipment is

not connected, this item will not appear.

2 Adjust the selected item by rotating the

dial.

Adjust within three seconds after selecting

the item. (After three seconds, the dial

function reverts the volume control.)

Attenuating the sound

Press (ATT) on the supplied rotary

commander or the optional wireless

remote.

“ATT on” lights up for a second.

To restore the previous volume level, press

(ATT) again.

Tip

The unit decreases the volume automatically when

a telephone call comes in (Telephone ATT

function).

Changing the operative direction

The operative direction of controls is factory-

set as shown below.

If you need to mount the rotary commander on

the right hand side of the steering column, you

can reverse the operative direction.

Press (SOUND) for two seconds while

pushing the VOL control.

Tip

You can also change the operative direction of

these controls with the unit (See “Changing the

sound and display settings” on page 21).

To increase

To decrease

Press (SOUND) to

adjust the volume

and sound menu.

Press (LIST) to:

• Display the memorized names.

• Display the programme type.

Sidan laddas ...

Sony XR-C7220R Användarmanual

Denna manual är också lämplig för

Sony XR-C7220R Användarmanual

på andra språk

Relaterade papper

Andra dokument