2
PARAMETER
Model POWM5A1014
Washing Capacity 10.0kg
Max. spin speed 1400 rpm
Net Weight 67 kg
Dimension (W×D×H) 595 × 610 × 845 mm
Rated Voltage 220-240V
Heating Power 1500W
Washing Power 250W
Add Detergent, Close the Door and Set the Program
Load the clothes to be washed in the drum and close the door.
Add the detergent into the relevant compartments for the type
of program you are going to select. Add detergent as described
in Detergent and Additives section of User’s Operation Manual.
1. Turn on the power.
2. Spin program selection button to required program, “off” must
be passed through if pointer’s initial position is not “off”, start
up.
3. Select washing temperature and spin speed by pressing
“Temp” and “Spin” buttons.
4. Press “Options” button to select additional functions.
5. After starting the program, display window displays program
length (hours: minutes) and additional function options in
sequence.
Addition function selection
At standby state, press “Options” button to select additional
function for current program. Select only one function for each
press, and then corresponding icon flashes. After starting up,
program cannot be changed.
Pre-wash
Select the function to conduct pre-wash so as to enhance
washing effects and better remove stains. This function is suitable
for heavy dirt clothes.
Before inflowing, laundry detergent/washing powder can be
added to pre-wash box, and washing powder must be added to
main wash box.
Extra Rinse
After set the function of rinsing adding, the program runs the
rinsing process once again before running the softening, and the
total running time of the program increases accordingly.
Intensive
The function can be selected to prolong washing time,
strengthen washing effects and remove stain better.
Inlet water warning
If tap is not opened, or water pressure is too low, display screen
will prompt “F01” to give alarm.
Drainage warning
If the pipe is squeezed, drainage will not be smooth. In case
of failing to completely drain for long time, display screen will
prompt “F03” to give alarm.
Programme Instructions
1. The eco 40-60 programme is able to clean normally soiled cotton
laundry declared to be washable about 40 °C to 60 °C, together
in the same cycle, and that this programme is used to assess the
compliance with the EU ecodesign legislation.
2. The power consumption of the off-mode is 0.49W, and the left-
on mode is 0.49W.
3. The most efficient programmes in terms of energy consumption
are generally those that perform at lower temperatures and
longer duration.
4. Loading the household washing machine up to the capacity
indicated by the manufacturer for the respective programmes will
contribute to energy and water savings.
5. Correct use of detergent, softeners and other additives. Do not
apply excessive detergent. This may affect the washing results
adversely.
6. Periodic cleaning, including optimal frequency, and limescale
prevention and procedure.
7. Noise and remaining moisture content are influenced by the
spinning speed: the higher the spinning speed in the spinning
phase, the higher the noise and the lower the remaining moisture
content.
8. The product information and QR code are reflected in the energy
consumption label, the product registration information can be
obtained by scanning the QR code.
9. The information of standard programmes.
Program
Selected
Temperature
(°C)
Rated
Capacity
(kg)
Maximum
temperature
in drum (°C)
Program
duration
(h:min)
Energy
consumption
kWh/cycle
Water
consumption
litres/cycle
Remaining
moisture
content
(%)
Maximum
speed
reached
rpm
Eco 40-60
full load 10 39 3:59 0.99 65 49.00 1400
Eco 40-60
half load 5 36 3:00 0.65 50 51.00 1400
Eco 40-60
1/4 load 2.5 25 2:50 0.27 24 51.00 1400
Cotton 20 10 20 2:09 0.22 115 51.00 1400
Cotton 60 10 55 3:29 1.56 108 53.00 1400
Mix 40 4 45 2:18 0.85 69 45.00 1400
Quick 15’ 40 1 38 0:30 0.33 22 55.00 800
20°C 20 10 20 1:50 0.20 85 51.00 1400
The values given for programmes other than the eco 40-60
programme are indicative only.
Door Lock Icon
After the program starts, the Door Lock icon will light up and
the door will be locked.
After completing program, door lock unlocks automatically.
During pause, if door opening condition can be met halfway, the
door lock will unlock and its indicator light will go out.
When door lock indicator light flashes, door shall not be opened
forcibly so as to avoid personal injury.
Delay End Function
Delay end function allows to run the machine at the consumers’
convenience, for example, at night when electricity is cheaper.
•Only under the standby mode, this button is valid for selecting
the reservation time.
•After the reservation function is selected, the time will increase
1h when each time the reservation button is pressed. Before
reservation, if the program time does not satisfy the integral
multiple of 1h, it shall be completed by pressing the reservation
key for the first time, and then the time increases 1h when each
time the reservation button is pressed. If the reservation is
selected, before the program runs, the current reservation can be
cancelled by turning the button to select other programs.
•The delay time must be longer than the wash program length as
the delay time is the time program will finish. For example: if the
selected program time is 02:28, the delay time selected must be
between 03:00 and 24:00.
•When the reservation process is operated, the icon of
‘reservation time’ will be on. When the reservation process is
finished, the icon of ‘reservation time’ will be off, while the icon
of the ‘remaining time’ will be on.
Favourite
After selecting the program and setting each parameter and
starting, long press the Favorite key for 3s to memorize the
selected program, temperature, rotational speed and other
related settings, and then the Favorite symbol lamp will be on.
Under the circumstance that the Favorite lamp is not on, short
press the Favorite key, then the program will be switched to the
program memorized last time; and meantime, the temperature,
rotational speed and other parameters will automatically change
into the parameters memorized last time.
At this moment, if switching the program or pressing other keys,
the panel will display a new program and parameters, and the
Favorite symbol lamp will be off.
When the user uses it for the first time, if he/she has never long
pressed the Favorite key to collect programs, he/she can short
press the Favorite key and then the cotton linen program and its
default settings will be collected by default.
Mute Function
When the machine is in the state of holding, pause or
operation, press “Spin+Favourite” buttons for 2 seconds, the
display will show mute function fault icon. All the buzzing will
be turned off except the alarms.
When the machine is in the mute state, press “Spin
+Favourite” buttons for 2 seconds until mute function fault
icon lights off. All the buzzing will be activated.
Automatic weighting
Washing machine displays “----” after startup, indicating that it
is weighing automatically. It will adjust program length (hours:
minutes) automatically according to weight of clothes.
Child Lock
To strengthen the safety of children, this machine is equipped
with Child Lock function.
When the programme starts, press “Temp.+Spin” button for 2
seconds. Child Lock icon will light up, and then Child Lock is set
up. Repeat the same operation, the Child Lock will be released.
•When the Child Lock is set, all function buttons will be shielded.
•When you turn the machine off by rotating the program
selection button to “Off”, child lock is released.
•After completing program, child lock will automatically unlock.
To Start the Program
After you have selected your options and placed detergent
within the detergent dispenser, turn on the water tap and press
the “Start/Pause” button. The screen will display the current
program progression with icons from left to right. It also displays
the remaining program time.
To Cancel the Program or Reselect the Options
1. Rotate the program to “Off” for 3 seconds to turn off the
machine.
2. Select the new program and options.
3. Press “Start/Pause” button to turn on the machine without
adding any extra detergent.
End of the Program
When programme finished its running, it will display “End”. If
no operation is taken in 2 minutes, the machine will turn off
automatically.
1.Rotate the program to “Off” to turn off the machine;
2.Close the tap;
3.Open the door and take the washed clothes out;
4.Slightly open the door to remove moisture in the pump.
Reload in Process
If you want to reload clothes in the process of washing, please
press “Start/Pause” button.
•If reload icon light up, the door can be opened in the process,
remaining time and the Door Lock icon in display will flash. Then
the Door Lock icon will go out, and the door can be opened.
•If reload icon doesn’t light up, the Door Lock icon doesn’t
flash, it indicates that current temperature is over 50°C or you
have passed the time for reloading in the process, namely no
clothes allowed to load into the machine.