Senco PC1010N Operating Instructions Manual

2

Table Of Contents

Introduction.................................................................................................................................................... 3

Inspection...................................................................................................................................................... 3

Safety Warnings............................................................................................................................................ 4

Compressor Features ................................................................................................................................... 8

Preparation..................................................................................................................................................10

Initial Set-Up .........................................................................................................................................10

Location ................................................................................................................................................ 10

Electrical ............................................................................................................................................... 10

Operation..................................................................................................................................................... 11

Pre-Start Checklist................................................................................................................................11

Start-Up ................................................................................................................................................ 11

Shutdown.............................................................................................................................................. 11

Maintenance................................................................................................................................................11

Troubleshooting .......................................................................................................................................... 12

Compressor Specifications .........................................................................................................................14

Declaration of Conformity............................................................................................................................ 14

Limited Warranty ......................................................................................................................................... 15

Parts Reference Guide................................................................................................................................ 16

3

Introduction

Congratulations on the purchase of your new SENCO® Air Compressor! You can be assured your

SENCO Air Compressor was constructed with the highest level of precision and accuracy. Each

component has been rigorously tested by technicians to ensure the quality, endurance and performance

of this air compressor.

This operator’s manual was compiled for your benefit. By reading and following the simple safety,

installation and operation, and maintenance steps described in this manual, you will receive years of

troublefree operation from your new SENCO Air Compressor. The contents of this manual are based on

the latest product information available at the time of publication. The manufacturer reserves the right to

make changes in price, color, materials equipment, specifications or models at any time without notice.

Safety Alert!

A “DANGER, WARNING or CAUTION” safety warning will be surrounded by a “SAFETY ALERT

BOX.

” This box is used to designate and emphasize Safety Warnings that must be followed when

operating this air compressor. Accompanying the safety warnings are “Signal Words” which

designate the degree or level of hazard seriousness. The “Signal Words” used in this manual are

as follows:

DANGER: Indicates an imminently hazardous situation which, if not avoided,

WILL result in death or serious injury.

WARNING: Indicates an imminently hazardous situation which, if not avoided,

COULD result in death or serious injury.

CAUTION: Indicates an imminently hazardous situation which, if not avoided

MAY result in minor or moderate injury or damage to the air

compressor.

The symbols set to the left of this paragraph are “Safety Alert

Symbols

.” These symbols are used to call attention to items

or procedures that could be dangerous to you or other

persons using this equipment.

ALWAYS PROVIDE A COPY OF THIS MANUAL TO ANYONE USING THIS EQUIPMENT. READ ALL

INSTRUCTIONS IN THIS MANUAL AND ANY INSTRUCTIONS SUPPLIED BY MANUFACTURERS

OF SUPPORTING EQUIPMENT BEFORE OPERATING THIS AIR COMPRESSOR AND ESPECIALLY

POINT OUT THE “SAFETY WARNINGS” TO PREVENT THE POSSIBILITY OF PERSONAL INJURY

TO THE OPERATOR.

Inspection

Unbox the air compressor and write in the serial number in the space provided below. Inspect for signs of

obvious or concealed freight damage. Be sure that all damaged parts are replaced and any mechanical

problems are corrected prior to the operation of the air compressor.

SERIAL NUMBER__________________________________________

If you have Questions or Comments call SENCO’s toll-free Action-line: 1-800-543-4596 or, e-mail:

toolprof@Senco.com

Please have the following information available for all service calls:

1. Model Number

2. Serial Number

3. Date and Place of Purchase

Senco, 4270 Ivy Pointe Blvd., Cincinnati, OH 45245

4

Safety Warnings

Read All Safety Warnings Before Using Air Compressor

Hazard

Potential Consequence

Prevention

Risk of

Electric Shock

or

Electrocution

•Serious injury or death could

occur if the air compressor is

not properly grounded. Your air

compressor is powered by

electricity and may cause

electric shock or electrocution if

not used properly.

•Make sure the air compressor is

plugged into a properly

grounded outlet which provides

correct voltage and adequate

fuse protection.

•Electrical shock may occur from

electrical cord.

•Check power cord for signs of

crushing, cutting or heat

damage. Replace faulty cord

before use.

•Keep all connections dry and off

the ground. Do not allow

electrical cords to lay in water or

in such a position where water

could come in contact with

them. Do not touch plug with

wet hands.

•Do

not pull on the electrical cord

to disconnect from the outlet.

•Electrical shock may occur if air

compressor is not operated

properly.

•

Never operate air compressor in

wet conditions or outdoors when

it is raining.

•Never operate air compressor

with safety guards/covers

removed or damaged.

•Serious injury or death may

occur if electrical repairs are

attempted by unqualified

persons.

•Any electrical wiring or repairs

performed on this air

compressor should be done by

Authorized Service Personnel in

accordance with National and

Local electrical codes.

•Before opening any electrical

enclosure, always shut off the

air compressor, relieve pressure

and unplug the air compressor

from the power source. Allow air

compressor to cool down. Never

assume the air compressor is

safe to work on just because it

is not operating. It could restart

at any time!

5

Safety Warnings

Read All Safety Warnings Before Using Air Compressor

Hazard

Potential Consequence

Prevention

Risk of

Explosion or Fire

•Serious injury or death may

occur from normal electrical

sparks in motor and pressure

switch.

•Always operate air compressor

in a well ventilated area free of

flammable vapors, combustible

dust, gases or other

combustible materials.

•If spraying flammable material,

locate the air compressor at

least 6 meters away from the

spray area. (An additional hose

may be required.)

•Serious injury may occur if any

air compressor ventilation

openings are restricted, causing

the air compressor to overheat

and start on fire.

•Never place objects against or

on top of air compressor.

Operate air compressor at least

30 cm away from any wall or

obstruction that would restrict

proper ventilation.

Risk of

Bursting

•Serious injury or death may

occur from an air tank explosion

if air tanks are not properly

maintained.

•Drain air tank daily or after each

use to prevent moisture buildup

in the air tank.

•If air tank develops a leak,

replace the air tank

immediately. Never repair, weld

or make modifications to the air

tank or its attachments.

•Never make adjustments to the

factory set pressures.

•Serious injury may occur from

an air compressor malfunction

or exploding accessories if

incorrect system components ,

attachments or accessories are

used.

•Never exceed manufacturer's

maximum allowable pressure

rating of attachments.

•Because of extreme heat, do

not use plastic pipe or lead tin

soldered joints for a discharge

line.

•Never use air compressor to

inflate small, low pressure

objects such as toys.

•All hoses and fittings shall be

suitable for site use at the

maximum allowable working

pressure of the portable

compressor.

•Use only genuine SENCO®

repair parts for your air

compressor.

6

Safety Warnings

Read All Safety Warnings Before Using Air Compressor

Hazard

Potential Consequence

Prevention

Risk to

Breathing

•Serious injury or death could

occur from inhaling compressed

air. The air stream may contain

carbon monoxide, toxic vapors

or solid particles.

•Never inhale air from the air

compressor either directly or

from a breathing device

connected to the air

compressor.

•Sprayed materials such as

paint, paint solvents, paint

remover, insecticides, weed

killers, etc. contain harmful

vapors and poisons.

•Operate air compressor only in

a well ventilated area. Follow all

safety instructions provided with

the materials you are spraying.

Use of a respirator may be

required when working with

some materials.

Risk of

Burns

•Serious injury could occur from

touching exposed metal parts.

These areas can remain hot for

some time after the air

compressor is shut down.

•Never allow any part of your

body or other materials to make

contact with any exposed metal

parts on the air compressor,

motor, or pipework.

Risk of

Flying Objects

•Soft tissue damage can occur

from the compressed air

stream.

•Always wear OSHA required

“Z87” safety glasses to shield

the eyes from flying debris.

•Never point the air stream at

any part of your body, anyone

else or animals.

•Never leave pressurized air

compressor unattended. Shut

off air compressor and relieve

pressure before attempting

maintenance, attaching tools or

accessories.

Eye Protection

Must Be Worn

•Serious injury can occur from

loose debris being propelled at

a high speed from the

compressed air stream.

•Always maintain a safe distance

from people and animals while

operating the air compressor.

•Do not move the air compressor

while air tank is under pressure.

Do not attempt to move the air

compressor by pulling on the

hose.

7

Safety Warnings

Read All Safety Warnings Before Using Air Compressor

Hazard

Potential Consequence

Prevention

Risk from

Moving Parts

Warning:

Unit May Start

Without Warning

•Risk of bodily injury from

moving parts. This air

compressor cycles

automatically when the pressure

switch is in the

ON (1)

/Auto

position.

•Always turn off air compressor

when not in use

. Bleed pressure

from the air hose and unplug

from electrical outlet before

performing maintenance. All

repairs to the air compressor

should be made by an

Authorized Service person.

Never assume the air

compressor is safe to work on

just because it is not operating.

It could restart at any time!

•Risk of injury from negligent

use.

•Do not operate without

protective covers/guards.

Replace damaged

covers/guards before using the

air compressor.

Risk from

Negligence

•Never allow children or

adolescents to operate this air

compressor!

•Stay alert -- watch what you are

doing. Do not operate the air

compressor when fatigued or

under the influence of alcohol or

drugs.

•Know how to stop the air

compressor. Be thoroughly

familiar with controls.

Risk of

Air Compressor Damage

•Risk of major repair. •Do not operate air compressor

without an air filter.

•Do not operate air compressor

in a corrosive environment.

•Do not incline the air

compressor transversly or

longitudinally more than 10°.

•Always operate the air

compressor in a stable, secure

position to prevent air

compressor from falling.

•Follow all maintenance

instructions listed in this

manual.

! SAVE THESE INSTRUCTIONS !

8

Compressor Features

1.

Motor/Pressure Switch

2.

Thermal Overload / Reset

3.

Air Intake Filter

4.

Air Compressor Pump

5.

Safety Relief Valve

6.

Air Tank Drain Valve

7.

Tank Pressure Gauge

8.

Outlet Pressure Gauge

9.

Pressure Regulator

10.

Discharge Line

11.

Electric Power Cord

12.

Ventilation Openings / Protective Shroud

13.

Quick Disconnect

9

Compressor Features

1) Motor/Pressure Switch:

This switch is used to start or stop the air

compressor. Moving the switch to the

ON (1) position will provide

automatic power to the pressure switch which will allow the motor to

start when the air tank pressure is below the factory set cut

-

in pressure.

When in the

ON (1) position, the pressure switch stops the motor

when the air tank pressu

re reaches the factory set cut-

out pressure. For

safety purposes, this switch also has a pressure release valve located

on the side of the switch designed to automatically release compressed

air from the air compressor pump head and its discharge line when

the

air compressor reaches cut

-out pressure or is shut off. This allows the

motor to restart freely. Moving the switch to the

OFF (0) position will

remove power from the

pressure switch and stop the air compressor.

2

)Motor Thermal Overload:

Motor has a protective breaker located

on the pump. Excessive amperage draw will result in the breaker

tripping to protect the motor and operator. Reset the breaker by pushing

the black plastic stem back into the housing. Reset switch if it is tripped.

3

)Air Intake Filter:

This filter is designed to clean air coming into the

pump. To ensure the pump continually receives a clean, cool, dry air

supply, this filter must always be clean and ventilation opening free

from obstructions. The filter can be removed for cleanin

g by using

warm, soapy water. Rinse the filter and air dry.

4

)Air Compressor Pump:

To compress air, the piston moves up and

down in the cylinder. On the downstroke, air is drawn in through the air

intake valve while the exhaust valve remains closed. On t

he upstroke,

air is compressed, the intake valve closes and compressed air is forced

out through the exhaust valve, into the discharge line, through the

check valve and into the air tank.

5

)Safety Relief Valve:

This valve is designed to prevent system

failures by relieving pressure from the system when the compressed air

reaches a predetermined level. The valve is preset by the manufacturer

and must not be modified in any way. To verify the valve is working

properly, pull on the ring. Air pressure should

escape. When the ring is

released, it will reseat.

6

)Air Tank Drain Valve:

The drain valve is used to remove moisture

from the air tank(s) after the air compressor is shut off. NEVER attempt

to open the drain valve when more than

0.7 bar of air pressure

is in

the air tank!

To open the drain valve, turn the knob counter-clockwise.

Tilt tank to ensure that all condensation drains through valve.

7

)Air Tank Pressure Gauge:

The air tank pressure gauge indicates

the reserve air pressure in the air tank(s).

8

)Outlet Pressure Gauge:

The outlet pressure gauge indicates the air

pressure available at the outlet side of the regulator. This pressure is

controlled by the regulator and is always less or equal to the air tank

pressure.

9

)Pressure Regulator:

The air pressure coming from the air tank is

controlled by the regulator knob. Turn the pressure regulation knob

clockwise to increase discharge pressure, and counter

-clockwise to

decrease discharge pressure. Follow tool operating instructions for

recomme

nded pressure range.

10) Discharge Line:

Please note that the discharge line is very hot.

HOT SURFACES: Do not remove protective shroud. High

temperature after sustained use.

10

Preparation

Initial Set-Up

1. Read safety warnings before setting-up air compressor.

Location

Caution

In order to avoid damaging the air compressor, do not incline the air

compressor transversely or longitudinally more than 10º.

1. Place air compressor at least 30 cm away from obstacles that may prevent proper ventilation.

Do not place air compressor in an area:

•Where there is evidence of oil or gas leaks.

•Where flammable gas vapors or materials may be present.

Warning

Serious injury or death may occur if electrical sparks from motor and pressure

switch come

in contact with flammable vapors, combustible dust, gases or

other combustible materials. When using the air compressor for spray

painting, place the air compressor as far away f rom the work area as possible,

using extra air hoses instead of extension cords.

•Where air temperatures fall below 0°C or exceed 40°C.

•Where extremely dirty air or water could be drawn into the air compressor.

Electrical

Danger

Improper connection of the equipment-grounding conductor can result in a

risk of shock or electrocutio

n. Check with a qualified electrician or service

personnel if you are in doubt as to whether the outlet is properly grounded.

Do not use any type of adapter with this product. If repair or replacement of

the cord or plug is necessary, do not connect the gr

ounding wire to either flat

blade terminal. The wire with insulation having an outer surface that is green

with or without yellow stripes is the grounding wire.

Warning

This product must be grounded. If there should be a malfunction or

breakdown,

grounding provides a path of least resistance for electric current

to reduce the risk of electric shock. This product is equipped with a cord

having an equipment grounding conductor and a grounding type plug. The

plug must be plugged into an appropriate ou

tlet that is properly installed and

grounded in accordance with all local codes and ordinances.

1. SENCO® DOES NOT RECOMMEND THE USE OF EXTENSION CORDS as this can create power

loss and overheating of the motor. Use of an additional air hose is recommended rather than an

extension cord. If use of an extension cord is unavoidable, it should be plugged into a GFCI found in

circuit boxes or protected receptacles.

When using an extension cord, observe the following:

Cable Length

Wire Gauge

Up to 8meters

12

AWG

Up to 30 meters

10

AWG

Up to 50 meters

8

AWG

Up to 75 meters

6

AWG

Use only extension cords having an electrical rating not less than the rating of the product. Do not use

damaged extension cords. Examine extension cord before using and replace if damaged. Do not

abuse extension cord and do not yank on any cord to disconnect. Keep cord away from heat and

sharp edges. Always shut off the air compressor switch before removing the plug from the receptacle.

11

Operation

Pre-Start Checklist

1. Remove any moisture in the air compressor tank. Remove excessive pressure by pulling on the

safety relief valve ring or with an air tool, then open the air tank drain valve in the bottom of the air

tank. Close tightly when drained.

Warning

:Risk of bodily injury. NEVER attempt to open the drain valve when

more than

0.7 bar of air pressure is in the air tank!

2. Make sure the air compressor Motor Switch is in the

OFF (0)

position.

3. Make sure all safety valves are working correctly.

4. Make sure all guards and covers are in place and securely mounted.

Start-Up

1. Ensure the lever on the pressure switch box is in the

OFF (0)

position.

2. Plug the power cord into the grounded outlet.

3. Move the motor switch to the

ON (1)

position.

4. This will allow the air compressor to

Start

building up pressure in the air tanks and

Stop

when

correct pressure is achieved. When pressure drops with usage, the air compressor will

Start

building

up pressure again.

5. Set pressure by adjusting the pressure regulator knob counter-clockwise for less pressure and

clockwise for more pressure.

6. If you notice any unusual noise or vibration, stop the air compressor and refer to “Troubleshooting.”

Shutdown

1. To stop the air compressor, move the lever on the motor switch to the

OFF (0)

position.NEVER stop

the air compressor by unplugging it from the power source.This could result in risk of electrocution.

2. Drain air from the air tank by releasing air with an attached air tool or by pulling on the safety relief

valve ring.

3. Once pressure in the air tanks register under 0.7 bar, open the drain valve under each air tank to

drain any moisture.

4. Allow the air compressor to cool down.

5. Wipe air compressor clean and store in a safe, non-freezing area.

Maintenance

Read the instruction manual before performing maintenance. The following procedures must be

performed when stopping the air compressor for maintenance or service.

1. Turn off the air compressor.

Warning

:Never assume the air compressor is safe to work on just because it

is not operating. It could restart at any time!

2. Disconnect cord from main power supply.

3. Open all drains.

4. Wait for the air compressor to cool before starting service.

Maintenance Chart

Procedure

Daily

Weekly

Monthly

Drain condensation in air tank(s)

X

Check for unusual noise/vibration

X

Check for air leaks

X

Inspect air filter

X

Clean exterior of compressor

X

Check safety relief valve

X

12

Troubleshooting

Symptom 1. Motor will not run or restart.

Probable Cause

Remedy

•Power cord not plugged in. •Plug cord into grounded outlet.

•Motor/Pressure switch in OFF (0) position. •Move switch to ON (1) position.

•Motor thermal overload switch has tripped. •Turn air compressor off, wait until motor is cool,

then check motor circuit breaker.

•Fuse blown or circuit breaker has tripped. •Replace fuse or reset circuit breaker.

•Check for proper fuse amperage.

•Check for low voltage conditions.

•Disconnect any other electrical appliances from

circuit or operate air compressor on its own

branch circuit.

•Wrong gauge wire or length of extension cord. •Check chart on page 10 for proper gauge wire

and cord length.

•Air tank pressure exceeds motor/pressure switch

“cut-in” pressure.

•Motor will start automatically when air tank

pressure drops below “cut-in” pressure of

motor/pressure switch.

•Pressure release valve on motor/pressure switch

has not unloaded pump head pressure.

•Bleed the line by moving the switch to the

OFF (0) position.

•Defective motor, motor capacitor, motor/pressure

switch, or check valve.

•Contact Senco Customer Service.

Symptom 2. When in the ON (1) position, motor runs continuously.

Probable Cause

Remedy

•Motor/Pressure switch does not shut off motor

when air compressor reaches “cut-out” pressure

and safety relief valve activates.

•Move the motor/pressure switch to the OFF (0)

position. If the motor doesn’t shut off, unplug the

air compressor. If the electrical contacts are

welded together, replace the pressure switch.

•Air compressor is incorrectly sized. •Limit the air pressure to the capacity of the air

compressor. Either use a smaller tool or a larger

air compressor.

Symptom 3. Air continues to leak at motor/pressure switch release valve after motor stops.

Probable Cause

Remedy

•The check valve is stuck open. •Remove, clean, or replace.

Symptom 4. Air continues to leak at motor/pressure switch release valve after motor is running.

Probable Cause

Remedy

•Defective motor/pressure switch. •Replace.

Symptom 5. Air leaks from safety relief valve.

Probable Cause

Remedy

•Possible defective safety relief valve. •Operate safety relief valve manually by pulling on

ring. If it still leaks, it should be replaced.

•Excessive air tank pressure. •Defective motor/pressure switch. Replace.

13

Troubleshooting

Symptom 6. Air leaks at fittings.

Probable Cause

Remedy

•Fittings are not tight enough. •Tighten fittings where air can be heard escaping.

Check fittings with soapy water solution.

Do not overtighten.

Symptom 7. Air leak in air tank.

Probable Cause

Remedy

•Defective or rusted air tank. •Air tank must be replaced.

Do not attempt to repair air tank!

Do not weld, repair or make modifications.

Symptom 8. Air blowing from inlet filter.

Probable Cause

Remedy

•Damaged inlet (reed) valve. •Contact SENCO Customer Service.

Symptom 9. Insufficient pressure at air tool or accessory.

Probable Cause

Remedy

•Pressure regulator knob not turned to high

enough pressure or defective pressure regulator.

•Adjust pressure regulator knob to proper setting

or replace.

•Restricted air intake filter. •Clean.

•Air leaks. •Check for leaks and repair.

•Air compressor is not large enough for air

requirement.

•Check the accessory air requirement. If it is

higher than the CFM or pressure supply of the air

compressor, you need a larger air compressor.

Symptom 10. Air compressor not making enough air.

Probable Cause

Remedy

•Restricted air intake filter. •Clean.

•Defective (reed) valve. •Drain air tank and measure pump up time.

Compare to specifications. If lower, remove pump

head and inspect valve plate, clean or replace.

Symptom 11. Moisture in discharge air.

Probable Cause

Remedy

•Condensation in air tank caused by high level of

atmospheric humidity or air compressor is not run

long enough.

•Drain air tank after every use. Drain air tank more

often in humid weather and use an air line filter.

14

Compressor Specifications

Model #: PC 1010N EU

Motor

Horsepower 0.5 HP (peak) / 0.3 HP (Running)

Voltage 230V

Amperage 2A

Hz. 50

Phase Single

RPM 2850

Compressor Pump

Number of Cylinders 1

Compression Stage 1

Crankcase Aluminum

Bearings Ball

Cylinder Aluminum

Valves Reed-Single

Head Aluminum

Filter Insert

Motor/Pressure Switch Setting

Cut-out 9 bar (130 PSI)

Cut-in 7 bar (100 PSI)

Controls ON (1) / OFF (0)

Air Tank

Capacity 3.8 liter

Performance

CFM Air Displacement 1.2

CFM @ 40 PSI

0.7

CFM @ 90 PSI

0.5

CFM @ 100 PSI

0.45

Maximum Pressure

9 bar (130 PSIG)

Pump-up Time: 0-135 PSI

150 seconds

Recovery Time: 105-135 PSI

36 seconds

Weight

Net

9.7 kg

Dimensions

Basic L×W×H

36.5 ×30 ×31 cm

Noise

Measured sound power level (dB)

78 dBA

Guaranteed sound power level (dB)

81 dBA

Declaration of Conformity

15

Limited Warranty

Parts Reference Guide

2

Inhalt

Einleitung....................................................................................................................................................... 3

Inspektion...................................................................................................................................................... 3

Sicherheitshinweise...................................................................................................................................... 4

Leistungsmerkmale des Kompressors.......................................................................................................... 8

Vorbereitung................................................................................................................................................10

Einrichten Für Die Erstmalige Inbetriebnahme..................................................................................... 10

Aufstellort.............................................................................................................................................. 10

Elektrik .................................................................................................................................................. 10

Betrieb .........................................................................................................................................................11

Checkliste Für Vorbereitung Auf Die Inbetriebnahme.......................................................................... 11

Inbetriebnahme..................................................................................................................................... 11

Ausschalten ..........................................................................................................................................11

Wartung.......................................................................................................................................................11

Störungsbeseitigung ................................................................................................................................... 12

Technische Daten .......................................................................................................................................14

Konformitätserklärung .................................................................................................................................14

Begrenzte Garantie .....................................................................................................................................15

Parts Reference Guide................................................................................................................................ 16

3

Einleitung

Wir beglückwünschen Sie zum Kauf Ihres neuen SENCO®-Luftkompressors! Sie können sich sicher sein,

dass Ihr SENCO-Luftkompressor mit höchster Präzision gebaut wurde. Jede Komponente wurde streng

von Technikern geprüft, um Qualität, Haltbarkeit und Leistung dieses Luftkompressors sicherzustellen.

Diese Bedienungsanleitung soll Ihnen beim Betrieb helfen. Wenn Sie dieses Handbuch durchlesen und

die in ihm enthaltenen einfachen Sicherheits-, Montage-und Bedienungsanweisungen sowie

Wartungsschritte beachten, wird Ihr neuer SENCO-Luftkompressor jahrelang störungsfrei funktionieren.

Der Inhalt dieses Handbuchs basiert auf den neusten Produktinformationen, die zum Zeitpunkt der

Veröffentlichung vorlagen. Der Hersteller behält sich das Recht vor, Preis, Farbe, Werkstoffe,

Ausstattung, Spezifikationen oder Modelle jederzeit ohne Vorankündigung zu ändern.

Sicherheitshinweis!

Jeder Sicherheitshinweis des Typs “GEFAHR”, “WARNUNG” oder ACHTUNG” ist mit einem

“SICHERHEITSHWEIS-KASTEN” umrandet.

Dieser Kasten dient dazu, Sicherheitshinweise zu markieren und hervorzuheben, die beim Betrieb des

Luftkompressors zu beachten sind. Vor den Sicherheitshinweisen finden Sie “Signalwörter”, die den Grad

bzw. die Größenordnung der Gefahr bezeichnen. Die in diesem Handbuch verwendeten “Signalwörter”

lauten wie folgt:

GEFAHR:Bezeichnet eine unmittelbar gefährliche Situation, die –falls sie nicht

vermieden wird tödlich oder mit Personenschäden enden wird.

WARNUNG:Bezeichnet eine potenziell gefährliche Situation, die –falls sie nicht

vermieden wird –tödlich oder mit Personenschäden enden könnte.

ACHTUNG:Bezeichnet eine potenziell gefährliche Situation, die –falls sie nicht

vermieden wird –mit geringfügigen oder minderschweren

Personenschäden oder der Beschädigung des Luftkompressors enden

könnte.

Die Symbole links neben diesem Abschnitt sind so genannte

“Sicherheitshinweis-Symbole.”

Diese Symbole dienen dazu, auf bestimmte Punkte oder Prozeduren

aufmerksam zu machen, die für Sie oder Personen, die dieses Gerät

benutzen, gefährlich sein könnten.

STELLEN SIE JEDER PERSON, DIE DIESES GERÄT BENUTZT, EINE KOPIE DIESES HANDBUCHS ZUR

VERFÜGUNG. LESEN SIE ALLE IN DIESEM HANDBUCH ENTHALTENEN ANWEISUNGEN UND SONSTIGEN

VON DER HERSTELLER DER ZUBEHÖRTEILE MITGELIEFERTEN ANWEISUNGEN DURCH, EHE SIE DIESEN

LUFTKOMPRESSOR BEDIENEN, UND HEBEN SIE BESONDERS DIE “SICHERHEITSHINWEISE” HERVOR,

UM DIE GEFAHR ZU VERMEIDEN, DASS SICH DER BEDIENER VERLETZT.

Inspektion

Nehmen Sie den Luftkompressor aus der Transportkiste und notieren Sie seine Seriennummer in der

unten dafür vorgesehenen Rubrik. Inspizieren Sie den Luftkompressor auf Anzeichen für sichtbare oder

verdeckte Transportschäden. Stellen Sie sicher, dass alle beschädigten Teile ausgetauscht und alle

mechanischen Probleme behoben werden, bevor Sie den Luftkompressor in Betrieb nehmen.

Seriennummer__________________________________________

Wenn Sie Fragen haben oder Hinweise geben möchten, dann können Sie SENCO gebührenfrei unter

folgender Tel.-Nr. anrufen:1-800-543-4596 oder E-Mail:toolprof@Senco.com

Bitte halten Sie bei Service-Anrufen folgende Informationen bereit:

1. Nummer des Modells

2. Seriennummer

3. Datum und Ort des Kaufs

Senco, 4270 Ivy Pointe Blvd., Cincinnati, OH 45245

4

Sicherheitshinweise

Lesen sie alle sicherheitshinweise durch, bevor sie den

kompressor betreiben

Gefahr

Potenzielle Folgen

Unfallverhütung

Gefahr Durch

Elektrische Schläge

oder

Tödliche Elektroschocks

•Wenn der Luftkompressor nicht

ordnungsgemäß geerdet wird, kann

dies Verletzungen, eventuell mit

Todesfolge, nach sich ziehen. Der

Luftkompressor wird elektrisch

betrieben und kann Quelle

elektrischer Schläge oder sogar

tödli

cher Elektroschocks sein, wenn

er nicht ordnungsgemäß betrieben

wird.

•Stellen Sie sicher, dass der

Luftkompressor an eine

ordnungsgemäß geerdete

Netzsteckdose angeschlossen wird,

die die richtige Spannung führt und

angemessen durch eine Sicherung

gesichert ist.

•Prüfen Sie das Netzkabel auf

Anzeichen für Beschädigung durch

Quetschung, Schnitte oder Wärme.

•Das Netzkabel kann Quelle

elektrischer Schläge sein.

•Ersetzen Sie das Netzkabel vor

Inbetriebnahme, falls es beschädigt

ist.

•Hallten Sie alle Anschlüsse

trocknen unin ausreichendem

Abstand zum Boden. Netzkabel

dürfen nicht im Wasser liegen oder

an Stellen, an denen sie in Kontakt

mit Wasser kommen könnten.

Berühren Sie den Stecker niemals

mit nassen Händen.

•Zu elektrischen Schlägen kann es

kommen, wenn der Luftkompressor

nicht ordnungsgemäß betrieben

wird.

•Ziehen Sie nicht am Netzkabel, um

den Stecker aus der Steckdose zu

ziehen.

•Betreiben Sie den Luftkompressor

niemals unter feuchten

Umgebungsbedingungen oder

unter freiem Himmel, wenn es

regnet.

•Wenn unqualifizier tes Personal

versucht, den Luftkompressor zu

reparieren, kann dies zu

Verletzungen führen.

•Betreiben Sie den Luftkompressor

niemals, wenn die

Schutzverkleidung bzw. die

Abdeckungen entfernt oder

beschädigt sind.

•Der Luftkompressor darf nur von

zugelassenen

Kundendiensttechnikern in

Übereinstimmung mit nationalen

und örtlicheelektrotechnischen

Vorschriften verdrahtet oder

repariert werden.

•Vor dem Öffnen des elektrischen

Schaltschranks muss der

Luftkompressor stets ausgeschaltet

werden; anschließend muss der

Druck abgelassen und der

Luftkompressor von der

Spannungsquelle getrennt werden.

•Lassen Sie den Luftkompressor

abkühlen. Gehen Sie niemals

davon aus, dass der

Luftkompressor betriebssicher ist,

nur weil er gerade nicht läuft. Er

könnte jederzeit unvermittelt

starten!

Sidan laddas ...

Senco PC1010N Operating Instructions Manual

Senco PC1010N Operating Instructions Manual

på andra språk

Andra dokument