English
Ver. 20230511
3 2 1
4 5
Wardrobe lighting LED with sensor
Art.no 36-8985 Model LUM-400X40W02-01D
Please read theentire instruction manual before using theproduct
and then save it for future reference. We reserve theright for
any errors in text or images and any necessary changes made
to technicaldata. In theevent of technical problems or other
queries, please contact our Customer Services.
Safety
• Only use the provided charging cable
• Charge the battery before using it for the first time
Installation Care and maintenance
Clean theproduct using alightly moistenedcloth. Useonly mild
cleaning agents, never solvents or corrosive chemicals.
Battery/light source
The battery and light source is not replaceable.
When it stops working the product must be discarded.
Responsible disposal
This symbol indicates that this product should not
be disposed of with general household waste.
This applies throughout the entire EU. In order to
prevent any harm to the environment or health
hazards caused by incorrect waste disposal, the
product must be handed in for recycling so that the
material can be disposed of in a responsible manner.
When recycling your product, take it to your local
collection facility or contact the place of purchase.
They will ensure that the product is disposed of in an
environmentally sound manner.
Specifications
Charge 5 V DC, 1 A
Battery 3,7 V DC, 800 mAh
Power 0.75 W
Light source 90 lm
Colour temperature 3000 / 4000/ 6500 K
Charging time Approx. 2 h
Operating time
at full charge Approx. 3.5 h
Dimensions 40×4×1,5 cm
1. Button for colour temperatur 3000 K / 4000 K / 6500 K
2. PIR-sensor / charging indicator
3. LED light
4. USB-C input for charging
5. Switch On / Off / Auto
Charging
1. Connect theincluded charging cable to theUSB-C-charging
socket to a USB-charger (sold separately).
2. The charge status indicator (2) shows status during charging:
- Fixed red light: The battery is being charged.
- Fixed green light: The battery is fully charged.
3. Unplug the charging cable from the light when the battery is
fully charged.
Operating instructions
The product is intended for indoor use only.
Buttons and functions
Attach themounting plate
provided to theback of
light and then remove
theprotective film from
thetape on theback of
themounting plate and
attach it to thedesired
location.
3000 K 4000 K 6500 K
Select operating mode with the switch (5):
• [ On ], continuously on
• [ Off ]
• [ Auto ], light turns on in darkness if motion is detected (within 3m).
The lighting turns off after 30 seconds if no one moves in
front of the sensor (Auto mode).
Change color temperature (3000K / 4000K / 6500K) by pressing
the button (1) repeatedly.