EN -11-
• When removing ice from the ice-making compartment, do not touch it. Ice may
cause fro burns and/or cuts.
• Do not touch frozen goods with wet hands. Do not eat ice-cream or ice cubes
immediately after they are removed from the ice-making compartment.
• Do not re-freeze thawed frozen food. This may cause health issues such as food
poisoning.
Inalling and operating your fridge freezer
Before using your fridge freezer for the r time, please pay attention to the following points:
• The operating voltage for your fridge freezer is 220-240 V at 50Hz.
• The plug mu be accessible after inallation.
• Your fridge freezer may have an odour when it is operated for the r time. This is normal
and the odour will fade when your fridge freezer arts to cool.
• Before connecting your fridge freezer, ensure that the information on the data plate
(voltage and connected load) matches that of the mains electricity supply. If in doubt,
consult a qualied electrician.
• Insert the plug into a socket with an ecient ground connection. If the socket has no
ground contact or the plug does not match, we recommend you consult a qualied
electrician for assiance.
• The appliance mu be connected with a properly inalled fused socket. The power
supply (AC) and voltage at the operating point mu match with the details on the name
plate of the appliance (the name plate is located on the inside left of the appliance).
• We do not accept responsibility for any damages that occur due to ungrounded usage.
• Place your fridge freezer where it will not be exposed to direct sunlight.
• Your fridge freezer mu never be used outdoors or exposed to rain.
• Your appliance mu be at lea 50 cm away from oves, gas ovens and
heater cores, and at lea 5 cm away from electrical ovens.
• Do not cover the body or top of fridge freezer with lace. This will aect the
performance of your fridge freezer.
• Clearance of at lea 150 mm is required at the top of your appliance. Do
not place anything on top of your appliance.
• Do not place heavy items on the appliance.
• Use the adjuable front legs to make sure your appliance is level and able. You can
adju the legs by turning them in either direction. This mu be done before placing
food in the appliance.
• Clean the appliance thoroughly before use (see Cleaning and Maintenance).
• Before using your fridge freezer, wipe all parts with a solution of warm water and a
teaspoon of sodium bicarbonate. Then, rinse with clean water and dry. Return all parts
to the fridge freezer after cleaning.
• Inall the two plaic diance guides (the parts on the black vanes
-condenser- at the rear) by turning it 90° (as shown in the gure) to
prevent the condenser from touching the wall.
• The diance between the appliance and back wall mu be minimum
42mm and maximum 75mm.