Sony XR-C5109R Bruksanvisning

 1998 by Sony Corporation

3-864-424-11 (1)

Operating Instructions

Manual de instrucciones

Bruksanvisning

Manual de instruções

ES

S

P

EN

FM/MW/LW

Cassette Car

Stereo

XR-C5109R

For installation and connections, see the supplied Installation/Connections

manual.

Con respecto a la instalación y las conexiones, consulte el manual de instalación/

conexiones suministrado.

Vi hänvisar till det medföljande häftet angående montering/anslutningar.

Para a instalação e as ligações, consulte o manual de instalação/ligações

fornecido.

2

EN

Welcome!

Thank you for purchasing the Sony Cassette

Car Stereo. This unit lets you enjoy a variety of

features by using a rotary commander.

In addition to the tape playback and the radio

operation you can expand your system by

connecting optional CD/MD unit*.

* You can connect to an CD changer, MD changer, or an

CD player, MD player.

3

EN

Table of contents

This Unit Only With Optional Equipment

Getting Started

Resetting the unit ................................................ 4

Detaching the front panel .................................. 4

Preparing the rotary commander ..................... 4

Setting the clock .................................................. 5

Cassette Player

Listening to a tape ............................................... 5

Playing a tape in various modes ....................... 6

Radio

Memorizing stations automatically

— Best Tuning Memory (BTM) ................... 7

Memorizing only the desired stations ............. 7

Receiving the memorized stations.................... 8

RDS

Overview of the RDS function .......................... 8

Displaying the station name.............................. 8

Re-tuning the same programme automatically

— Alternative Frequencies (AF) .................. 9

Listening to traffic announcements .................. 9

Presetting the RDS stations with AF and TA

data ................................................................ 10

Locating a station by programme type .......... 11

Setting the clock automatically ....................... 11

Other Functions

Using the rotary commander .......................... 12

Adjusting the sound characteristics ............... 13

Attenuating the sound ..................................... 13

Changing the sound and beep tone ............... 13

CD/MD Unit

Playing a CD/MD............................................. 14

Scanning the tracks

— Intro scan.................................................. 14

Playing tracks repeatedly

— Repeat play .............................................. 15

Playing tracks in random order

— Shuffle play .............................................. 15

Additional Information

Precautions......................................................... 16

Maintenance....................................................... 17

Dismounting the unit ....................................... 17

Location of controls .......................................... 18

Specifications ..................................................... 19

Troubleshooting guide ..................................... 20

Index ................................................................... 22

4

EN

Getting Started

Resetting the unit

Before operating the unit for the first time or

after replacing the car battery, you must reset

the unit.

Press the reset button with a pointed object,

such as a ball-point pen.

Note

Pressing the reset button will erase all the memorized

programme and memory functions.

Detaching the front panel

The front panel of this unit can be detached to

prevent the unit from being stolen.

1 Press (OFF).

2 Press (RELEASE) to open up the front

panel. Then slide the front panel a little

to the left, and pull it off towards you.

Notes

• Be sure not to drop the panel when detaching it from the

unit.

• If you press (RELEASE) to detach the panel while the

unit is still turned on, the power will automatically turn

off to protect the speakers from being damaged.

B

A

Reset button

(OFF)

Attaching the front panel

Attach part A of the front panel to part B of

the unit as illustrated and push until it clicks.

Notes

• Make sure the front panel is right side up when attaching

it to the unit as it cannot be attached upside down.

• Do not press the front panel too hard when attaching it

to the unit. It can easily be attached by pressing it lightly

against the unit.

• When you carry the front panel with you, keep it in the

supplied case.

• Do not press hard or put excessive pressure on the

display windows of the front panel.

• Do not expose the front panel to direct sunlight, heat

sources such as hot air ducts or leave it in a humid place.

Never leave it on the dashboard etc. of a car parked in

direct sunlight where there may be a considerable rise in

temperature inside the car.

Caution alarm

If you turn the ignition key to the OFF position

without removing the front panel, the caution

alarm will beep for a few seconds (only when

the POWER SELECT switch is set to the A

position).

If you connect an optional power amplifier to

the LINE OUT, and do not use the built-in

amplifier, the beep tone will be disabled.

Preparing the rotary

commander

When you mount the rotary commander,

attach the appropriate label, as in the

illustration below.

SEL

DSPL

M

O

D

E

S

E

L

D

S

P

L

M

O

D

E

(RELEASE)

5

EN

The hour digit blinks.

to go forward

The minute digit blinks.

to go forward

The clock activates.

Getting Started/Cassette Player

Cassette Player

Listening to a tape

Insert a cassette.

Playback will start automatically.

If a cassette is already inserted, press

(SOURCE) repeatedly until “PLAY” is

displayed.

The side facing up is being played.

The side facing down is being played.

Tip

To change the tape transport direction, press (MODE)

(*) during tape playback.

To Press

Stop playback (OFF)

Eject the cassette 6

Fast-winding the tape

During playback, press either side of

(SEEK/AMS) more than two second.

To start playback during fast-forwarding or

rewinding, press (MODE) (*).

Fast-forward

Rewind

Setting the clock

The clock has a 24-hour digital indication.

For example, setting it to 10:08

1 Press (OFF) or (DSPL) during operation.

2 Press (DSPL) for two seconds.

1 Set the hour digits.

2 Press (SEL) momentarily.

3 Set the minute digits.

3 Press (DSPL) momentarily.

Note

If the POWER SELECT switch on the top of the unit is set

to the B position, the clock cannot be set unless the power

is turned on. Set the clock after you have turned on the

radio.

100



1000



1000



1008





FWD



REV

1008



SEEK

AMS

to go backward

6

EN

To locate the succeeding tracks

To locate the preceding tracks

SEEK

AMS

Switching to the radio while fast-

winding a tape

— Automatic Tuner Activation (ATA)

Press (5) during playback.

“ATA” appears on the display.

While fast-forwarding or rewinding, press

(SEEK/AMS), after two seconds the tuner

automatically turns on.

To cancel this function, press (5) again.

Skipping blanks during tape

playback — Blank skip

Press (6) during playback.

“BL SKIP” appears on the display.

Blanks longer than eight seconds will

automatically be skipped during tape

playback.

To cancel this function, press (6) again.

Playing a CrO2 or metal tape

Press (4) when you want to listen to a

CrO2 (TYPE II) or metal (TYPE IV) tape.

“MTL” appears on the display.

To cancel this function, press (4) again.

Locating the beginning of a track

— Automatic Music Sensor (AMS)

You can skip up to nine tracks at one time.

During playback, press either side of

(SEEK/AMS) momentarily.

Note

The AMS function may not work when :

• the blanks between tracks are shorter than 4 seconds

• there is noise between tracks

• there are long sections of low volume or quiet sections.

Changing the displayed items

Each time you press (DSPL) during tape

playback, the displayed item changes as

follows:

z Tape playback z Clock z Frequency*

* While the AF/TA function activated.

Playing a tape in various

modes

Searching for the desired track

— Intro scan

Press (1) during playback.

“INTRO” appears on the display.

The first 10 seconds of all the tracks are played.

When you find the desired track, press again.

The unit returns to the normal playback mode.

Playing tracks repeatedly

— Repeat play

Press (2) during playback.

“REP” appears on the display.

When the current played track is over, it will

be played again from the beginning.

To cancel this function, press (2) again.

7

EN

Cassette Player/Radio

Memorizing only the

desired stations

Up to 6 stations on each band (FM1, FM2, FM3,

MW and LW) can be stored on the preset

number buttons in the order of your choice.

Therefore, 18 FM stations can be memorized.

If you try to store another station on the same

preset number button, the most recent stored

station will be erased.

1 Press (SOURCE) repeatedly to select the

tuner.

2 Press (MODE) repeatedly to select the

band.

3 Press (SEEK/AMS) to search for the

station you wish to store on a preset

number button.

4 Press the desired preset number button

((1) to (6)) for two seconds.

The number of the selected preset number

button appears on the display.

Radio

Memorizing stations

automatically

— Best Tuning Memory (BTM)

This function selects from the currently

received band the stations with the strongest

signals and memorizes them in order of their

frequency.

PREVENTING ACCIDENTS!

When tuning in while driving, use the

automatic tuning or memory preset search

function instead of manual tuning.

1 Press (SOURCE) repeatedly to select the

tuner.

Each time you press (SOURCE), the source

changes as follows:

z TAPE z TUNER z CD zMD

2 Press (MODE) repeatedly to select the

band.

Each time you press (MODE), the band

changes as follows:

z FM1 z FM2 z FM3

LW Z MW Z

3 Press (SENS/BTM) for two seconds.

Notes

• The unit will not store stations with weak signals on the

preset number buttons. If there are only a few stations

received, some preset number buttons will remain empty.

• When a preset number indicated on the display, the unit

starts storing station from the one currently display.

8

EN

Receiving the memorized

stations

1 Press (SOURCE) repeatedly to select the

tuner.

2 Press (MODE) repeatedly to select the

band.

3 Press the preset number button

momentarily ((1) to (6)) on which the

desired station is stored.

Tip

Press either side of (PRESET/DISC) to receive in order the

stations stored in the memory (Preset Search Function).

If FM stereo reception is poor

— Monaural mode

Press (SENS/BTM) momentarily until

“MONO” lights up on the display.

The sound will improve, but it will become

monaural. (The “ST” indication will

disappear.)

Changing the displayed items

Each time you press (DSPL), the display

changes between the frequency and the clock.

If you cannot tune in a preset

station

Press either side of (SEEK/AMS)

momentarily to search for the station

(automatic tuning).

Scanning stops when a station is received.

Press either side of the button repeatedly

until the desired station is received.

Note

If the automatic tuning stops too frequently, press

(SENS/BTM) momentarily until “LCL” light up on the

display (local seek mode). Only the stations with relatively

strong signals are tuned in.

Tip

If you know the frequency, press and hold either side of

(SEEK/AMS) until the desired station is received (manual

tuning).

RDS

Overview of the RDS

function

Radio Data System (RDS) is a broadcasting

service that allows FM stations to send

additional digital information along with the

regular radio programme signal. Your car

stereo offers you a variety of services. Here

are just a few: Re-tuning the same programme

automatically, Listening to traffic

announcements and Locating a station by

programme type.

Notes

• Depending on the country or region, not all of the RDS

functions are available.

• RDS may not work properly if the signal strength is

weak or if the station you are tuned in is not

transmitting RDS data.

Displaying the station

name

The name of the station currently received

lights up on the display.

Select an FM station.

When you tune in an FM station that

transmits RDS data, the station name lights

up on the display.

Note

The “*” indication means that an RDS station is being

received.

Changing the displayed items

Each time you press (DSPL), the displayed

items change as follows:

z Frequency z Time z Station name

Note

“NO NAME” lights up if the station received does not

transmit RDS data.

BBC 1 FM

FM1

9

EN

Listening to a regional programme

The “REG” (regional on) function of this unit

lets you stay tuned to a regional programme

without being switched to another regional

station. (Note that you must turn the AF

function on.) The unit is factory preset to

“REG“ but if you want to turn off the function,

do the following.

Press (AF/TA) for more than two seconds

until “REG” disappears.

Note that turning the “REG” function off

might cause the unit to switch to another

regional station within the same network.

Note

This function does not work in the United Kingdom and in

some other areas.

Local link function (United

Kingdom only)

The Local Link function lets you select other

local stations in the area, even though they are

not stored in your presets.

1 Press a preset number button that has

stored a local station.

2 Within five seconds, press again the

preset number button of the local

station.

3 Repeat this procedure until the desired

local station is received.

Listening to traffic

announcements

The Traffic Announcement (TA) and Traffic

Programme (TP) data let you automatically

tune in an FM station that is broadcasting

traffic announcements even though you are

listening to other programme sources.

Press (AF/TA) until “TA” or “AF TA” lights

up on the display.

The unit starts searching for traffic

information stations. “TP” lights up on the

display when the unit finds a station

broadcasting traffic announcements.

When the traffic announcement starts,

“TA” flashes, then flashing stops when the

traffic announcement is over.

continue to next page n

Re-tuning the same

programme automatically

— Alternative Frequencies (AF)

The Alternative Frequencies (AF) function

automatically selects and re-tunes the station

with the strongest signal in a network. By

using this function, you can continuously

listen to the same programme during a long-

distance drive without having to re-tune the

station manually.

1 Select an FM station.

2 Press (AF/TA) until “AF” lights up on the

display.

The unit starts searching for an alternative

station with a stronger signal in the same

network.

Note

When there is no alternative station in the area, and you

don’t need to search for an alternative station, turn the AF

function off by pressing (AF/TA) until “AF” disappears.

Changing the displayed items

Each time you press (AF/TA), the displayed

items change as follows:

z AF z TA z AF TA*

Blank Z

* Select this to turn on both AF and TA functions.

Notes

• “NO AF” and the station name flashes alternately, if the

unit cannot find an alternative station in the network.

• If the station name starts flashing after selecting a

station with the AF function on, this indicates that no

alternative frequency is available. Press (SEEK/AMS)

while the station name is flashing (within eight seconds).

The unit starts searching for another frequency with the

same PI (Programme Identification) data (“PI seek”

appears and no sound is heard). If the unit cannot find

another frequency, “NO PI” appears, and the unit

returns to the originally selected frequency.

Radio/RDS

96.0 MHz

98.5 MHz

Frequencies change automatically.

Station

102.5 MHz

10

EN

Tip

When the traffic announcement starts while you are

listening to another programme source, the unit

automatically switches to the announcement and goes back

to the original source when the announcement is over.

Notes

• “NO TP” flashes for five seconds if the received station

doesn’t broadcast traffic announcements. Then, the unit

starts searching for a station that does broadcast traffic

announcements.

• When the “EON” indication appears with “TP” on the

display, the current station makes use of broadcast traffic

announcements of other stations in the same network.

To cancel the current traffic

announcement

Press (AF/TA) momentarily.

To cancel all traffic announcements, turn

off the function by pressing (AF/TA) until

“AF” disappears.

Presetting the volume of traffic

announcements

You can preset the volume level of the traffic

announcements beforehand, so you will not

miss the announcement. When a traffic

announcement starts, the volume will be

automatically adjusted to the preset level.

1 Select the desired volume level.

2 Press (3) while holding down (SEL).

“TA VOL” appears and the setting is

stored.

Receiving emergency

announcements

If an emergency announcement comes in while

you are listening to the radio, the programme

will be automatically switched to the

announcement. If you are listening to a source

other than the radio, the emergency

announcements will only be heard if you set

AF or TA to on. The unit will then

automatically switch to these announcements

no matter what you are listening to at the time.

Presetting the RDS

stations with AF and TA

data

When you preset the RDS stations, the unit

stores each station’s data as well as its

frequency, so you don’t have to turn on the AF

or TA function every time you tune in the

preset station. You can select different setting

(AF, TA, or both) for individual preset stations,

or the same setting for all preset stations.

Presetting the same setting for all

preset stations

1 Select an FM band.

2 Press (AF/TA) repeatedly and select

either “AF“, “TA” or “AF TA” (for both AF

and TA functions).

Note that turning the “AF TA” function off

stores RDS stations as well as non-RDS FM

stations.

3 Press (SENS/BTM) for two seconds.

Presetting different settings for

each preset station

1 Select an FM band, and tune in the

desired station.

2 Press (AF/TA) repeatedly and select

either “AF“, “TA” or “AF TA” (for both AF

and TA functions).

3 Press the desired preset number button

for two seconds until “MEM” appears.

Repeat from step 1 for presetting other

stations.

Tip

If you want to change the preset AF and/or TA setting

after you tuned in the preset station, you can do so by

turning on/off the AF or TA function.

11

EN

1 Press (PTY) during FM reception until

“PTY” lights up on the display.

The current programme type name appears

if the station is transmitting the PTY data.

“--------” appears if the received station is

not an RDS station or if the RDS data has

not been received.

2 Press (PTY) repeatedly until the desired

programme type appears.

The programme types appear in the order

as shown in the above table. Note that you

cannot select “NONE” (Not specified) for

searching.

3 Press either side of (SEEK/AMS).

The unit starts searching for a station

broadcasting the selected programme type.

When the unit finds the programme, the

programme type appears again for five

seconds.

“NO” and the programme type appear

alternately for five seconds if the unit

cannot find the programme type and it

returns to the previous station.

Setting the clock

automatically

By receiving CT (Clock Time) data, the clock of

this unit can be set automatically.

During FM reception, press (2) while

pressing (SEL).

“CT” will be displayed, and the clock will

be set.

To cancel the CT function

Repeat the above procedure.

Notes

• The CT function may not work even though an RDS

station is being received.

• The time set by the CT function may not be exact.

Locating a station by

programme type

You can locate the station you want by

selecting one of the programme types shown

below.

Note

If the countries or regions where EON data is not

transmitted, you can use this function only for the stations

you have tuned in once.

Programme types Display

News NEWS

Current Affairs AFFAIRS

Information INFO

Sports SPORT

Education EDUCATE

Drama DRAMA

Culture CULTURE

Science SCIENCE

Varied VARIED

Popular Music POP M

Rock Music ROCK M

Middle of the Road Music M.O.R. M

Light Classical LIGHT M

Classical CLASSICS

Other Music Type OTHER M

Weather WEATHER

Finance FINANCE

Children's programms CHILDREN

Social Affairs SOCIAL A

Religion RELIGION

Phone In PHONE IN

Travel TRAVEL

Leisure LEISURE

Jazz Music JAZZ

Country Music COUNTRY

National Music NATION M

Oldies Music OLDIES

Folk Music FOLK M

Documentary DOCUMENT

Not specified NONE

Note

You can not use this function in some countries where no

PTY (Programme Type selection) data is available.

RDS

INFO







100

FM1

CT

12

EN

Other Functions

Using the rotary

commander

The rotary commander works by pressing

buttons and/or rotating controls.

You can control the optional CD/MD unit by

the rotary commander.

By pressing buttons (the SOURCE

and the MODE buttons)

Every time you press (SOURCE), the

source changes as follows:

TAPE n TUNER n CD n MD

Pressing (MODE) changes the operation in the

following ways:

• the tape transport.

• the band, FM1 n FM2 n FM3 n MW n LW.

• the CD/MD unit.

Tip

You can turn on this unit by pressing (SOURCE) on the

rotary commander.

By rotating the control (the SEEK/

AMS control)

(MODE)

(SOURCE)

Rotate the control momentarily and

release it to:

• Locate the beginnings of the tracks on the

tape. Rotate and hold the control, and

release it to fast-wind the tape. To

playback, rotate and hold the control

again, and release it.

• Locate a specific track on a disc. Rotate

and hold the control until you locate the

specific point in a track, then release it to

start playback.

• Tune in the stations automatically.

Rotate and hold the control to tune in the

specific station.

By rotating the control while

pushing in (the PRESET/DISC

control)

Push in and rotate the control to:

• Receive the stations memorized on the

preset buttons.

• Change the disc.

Other operations

Press (SEL)

to adjust

and select.

OFF

Press (ATT)to

attenuate the

sound.

Press (DSPL) to change the displayed items.

Press (OFF) to

turn off the unit.

Rotate the VOL control

to adjust the volume.

13

EN

Changing the operative direction

The operative direction of controls is factory

preset as in the illustration below.

If you need to mount the rotary commander

on the right side of the steering column, you

can reverse the controls operative direction.

Press (SEL) for two seconds while

pushing in the VOL control.

Adjusting the sound

characteristics

1 Select the item you want to adjust by

pressing (SEL) repeatedly.

VOL (volume) n BAS (bass) n TRE

(treble) n BAL (left-right) n FAD

(front-rear)

2 Adjust the selected item by pressing

either (+) or (–).

Adjust within three seconds after selecting.

(After three seconds the button will again

serve as the volume control button.)

Attenuating the sound

Press (ATT).

The “ATT” indication flashes.

To restore the previous volume level, press

again.

Tip

The unit decreases the volume automatically when a

telephone call comes in (Telephone-ATT function).

Other Functions

To increase

To decrease

Changing the sound and

beep tone

Boosting the bass sound — D-bass

You can enjoy clear and powerful bass sound.

The D-bass function boosts the low frequency

signal with a sharper curve than conventional

bass boost.

You can hear the bass line more clearly even if

the vocal volume remains the same. You can

emphasize and adjust the bass sound easily

with the D-BASS control. This effect is similar

to the one you get when you use an optional

subwoofer system.

Moreover, the Digital D-bass* function creates

even sharper and more powerful bass sounds

than Analog D-bass.

Adjusting the bass curve

Turn the D-BASS control to adjust the

bass level (1, 2 or 3).

“D-BASS”* appears in the display.

To cancel, turn the control to the OFF position.

* If the CD changer has the digital D-bass function,

“DIGITAL D-BASS” appears on the display during CD

playback.

Note

If the bass sound becomes distorted, adjust the D-BASS

control or volume button.

Attenuating the beep tone

Press (6) while pressing (SEL).

To obtain the beep tone again, press these

buttons again.

Note

If you connect an optional power amplifier to the LINE

OUT and do not use the built-in amplifier, the beep tone

will be disabled.

0dB

D-BASS 3

D-BASS 2

D-BASS 1

0dB

D-BASS 3

D-BASS 2

D-BASS 1

Digital D-bass Analog D-bass

Level

Frequency (Hz)Frequency (Hz)

14

EN

Locating a specific point in a track

— Manual Search

During playback, press and hold either

side of (SEEK/AMS) . Release the button

when you have found the desired part.

Switching to other discs

During playback, press either side of

(PRESET/DISC).

Scanning the tracks

— Intro scan

The first 10 seconds of all the tracks on the

current disc are played in order. After the first

disc is over, the next disc is played.

Press (1) during playback.

“INTRO” appears on the display.

When you find the desired track, press again .

The unit returns to the normal CD/MD

playback mode.

To locate the preceding tracks

To locate the succeeding tracks

To search forward

To search backward

To advance to the

next disc

To return to the

previous disc

SEEK

AMS

SEEK

AMS

DISC

PRESET

With Optional Equipment

CD/MD Unit

This unit can control a maximum of seven

external CD/MD units in this configuretion:

CD unit - maximum of five

MD unit - maximum of five.

Any combination up to seven will work.

Playing a CD/MD

Press (SOURCE) until the desired unit

indication appears on the display.

CD/MD playback starts.

When an CD/MD unit is connected, all the

tracks play from the beginning.

Selecting CD/MD units (when

several CD/MD units are connected)

Press (MODE) repeatedly to select the desired

CD/MD unit.

Changing the displayed items

Each time you press (DSPL) during CD/MD

playback, the item changes as follows:

$

Elapsed playback time

$

Track name*

$

Clock

* If the track name of an MD is not prerecorded “NO

NAME” appears in the display.

Tip

If the name of the MD is too long, only the first eight

characters appear in the display.

Locating a specific track

— Automatic Music Sensor (AMS)

During playback, press either side of

(SEEK/AMS) once for each track you wish

to skip the tracks.

15

EN

Playing tracks in random

order

— Shuffle play

To play the tracks on the current

disc in random order

Press (3) repeatedly during CD/MD

playback until “SHUF 1” is displayed.

To play all the discs in the unit in

random order

Press (3) repeatedly during CD/MD

playback until “SHUF 2” is displayed.

To play all the discs in the current

connected CD/MD units in random

order

Press (3) repeatedly during CD/MD

playback until “SHUF 3” is displayed.

Each time you press (3) the display changes as

follows:

* “SHUF 3” only when two or more CD/MD units are

connected the unit.

Note

CD/MD units are operated separately.

If you press (1) during shuffle play, the first 10

seconds of all tracks will be played in random

order.

REP 2

(Disc repeat)

REP 1

(Track repeat)

Cancel (Normal disc

playback mode)

Other Functions/CD/MD Unit

REP 3*

(Unit repeat)

SHUF 1

(Disc shuffle)

SHUF 2

(Unit shuffle)

SHUF 3*

(All shuffle)

Cancel (Normal disc

playback mode)

Playing tracks repeatedly

— Repeat play

To repeat a track

Press (2) repeatedly during CD/MD

playback until “REP 1” is displayed.

To repeat a disc

Press (2) repeatedly during CD/MD

playback until “REP 2” is displayed.

To repeat all the discs in the

current unit

Press (2) repeatedly during CD/MD

playback until “REP 3” is displayed.

Each time you press (2) the display changes as

follows:

* “REP 3” only when two or more CD/MD units are

connected the unit.

16

EN

Additional

Information

Precautions

• If your car was parked in direct sunlight

resulting in a considerable rise in

temperature inside the car, allow the unit to

cool off before operating it.

• If no power is being supplied to the unit,

check the connections first. If everything is in

order, check the fuse.

• If no sound comes from the speakers of a

2-speaker system, set the fader control to the

center position.

• When the tape is played back for a long

period, the cassette may become warm

because of the built-in power amplifier.

However, this is not a sign of malfunction.

If you have any questions or problems

concerning your unit that are not covered in

this manual, please consult your nearest Sony

dealer.

To maintain high quality sound

If you have drink holders near your audio

equipment, be careful not to splash juice or

other soft drinks onto the car audio. Sugary

residues on this unit or cassette tapes may

contaminate the playback heads, reduce the

sound quality, or prevent sound reproduction

altogether.

Cassette cleaning kits cannot remove sugar

from the tape heads.

Notes on Cassettes

Cassette care

• Do not touch the tape surface of a cassette, as

any dirt or dust will contaminate the heads.

• Keep cassettes away from equipment with

built-in magnets such as speakers and

amplifiers, as erasure or distortion on the

recorded tape could occur.

• Do not expose cassettes to direct sunlight,

extremely cold temperatures or moisture.

• Slack in the tape may cause the tape to be

caught in the machine. Before you insert the

tape, use a pencil or similar object to turn the

reel and take up any slack.

• Distorted cassettes and loose labels can cause

problems when inserting or ejecting tapes.

Remove or replace loose labels.

Cassettes longer than 90 minutes

The use of cassettes longer than 90 minutes is

not recommended except for long continuous

play. The tapes used for these cassettes are

very thin and tend to be stretched easily.

Frequent playing and stopping of these tapes

may cause them to be pulled into the cassette

deck mechanism.

Slack

17

EN

Additional Information

Maintenance

Fuse Replacement

When replacing the fuse, be sure to use one

matching the amperage rating stated on the

original fuse. If the fuse blows, check the

power connection and replace the fuse. If the

fuse blows again after replacement, there may

be an internal malfunction. In such a case,

consult your nearest Sony dealer.

Warning

Never use a fuse with an amperage rating

exceeding the one supplied with the unit as

this could damage the unit.

Cleaning the Connectors

The unit may not function properly if the

connectors between the unit and the front

panel are not clean. In order to prevent this,

open the front panel by pressing (RELEASE),

then detach it and clean the connectors with a

cotton swab dipped in alcohol. Do not apply

too much force. Otherwise, the connectors may

be damaged.

Fuse (10 A)

Main unit

Back of the front panel

Dismounting the unit

1

2

3

4

Release key (supplied)

18

EN

Location of controls

Refer to the pages for further details.

1 SEEK/AMS button 5, 6, 7, 8, 9, 11, 14

2 SOURCE button (TAPE/TUNER/CD/MD)

5, 7, 8, 14

3 (+)(–) (volume/bass/treble/left-right/

front-rear control) button 5, 13

4 MODE (*) button

During Tuner reception:

BAND select 7, 8

During Tape playback:

Transport direction change 5

During CD/MD playback:

Unit select 14

5 POWER SELECT switch (located on the

top of the unit)

See “POWER SELECT Switch” in the

Installation/Connections manual.

6 OFF button 4, 5

7 DSPL (display mode change/time set)

button 5, 6, 8, 14

8 SENS/BTM (sensitivity adjust/Best

tuning memory function) button 7, 8,

10

9 6 (eject) button 5

0 During radio reception:

Preset number buttons 7, 8, 9, 10

During tape/CD/MD playback:

(1) INTRO button 6, 14

(2) REPEAT button 6, 15

(3) SHUF (Shuffle) button 15

RELEASE

MODE

SEEK

AMS

SEL

SOURCE

ATT

OFF

213

546

INTRO REPEAT

ATA BL SKIP

PTY AF/TA

OFF

1

2

3

MTL

SHUF

DSPL

PRESET

DISC

D-BASS

SENS

BTM

(4) MTL button 6

(5) ATA (Automatic Tuner

Activation) button 6

(6) BL SKIP (Blank Skip) button 6

!¡ RELEASE (front panel release) button

4, 17

!™ Reset button (located on the front side

of the unit hidden by the front panel) 4

Press this button when you use this unit

for the first time, when you have changed

the car battery, or when the buttons of this

unit do not function properly.

!£ ATT button 13

!¢ SEL (control mode select) button 5, 10,

11, 13, 14

!∞ Display window

!§ PTY (programme type) button 11

!¶ PRESET/DISC button

During Tuner reception:

Preset stations select 8

During CD/MD playback:

Disc change 14

!• AF/TA (alternative frequency/traffic

announcement) button 9, 10

!ª D-BASS control 13

19

EN

Specifications

Cassette player section

Tape track 4-track 2-channel stereo

Wow and flutter 0.08 % (WRMS)

Frequency response 30 – 18,000 Hz

Signal-to-noise ratio

Tuner section

FM

Tuning range 87.5 – 108.0 MHz

Antenna terminal External antenna connector

Intermediate frequency 10.7 MHz

Usable sensitivity 9 dBf

Selectivity 75 dB at 400 kHz

Signal-to-noise ratio 65 dB (stereo),

68 dB (mono)

Harmonic distortion at 1 kHz

0.7 % (stereo),

0.4 % (mono)

Separation 35 dB at 1 kHz

Frequency response 30 – 15,000 Hz

MW/LW

Tuning range MW: 531 – 1,602 kHz

LW: 153 – 281 kHz

Antenna terminal External antenna connector

Intermediate frequency 10.71 MHz/450 kHz

Sensitivity MW: 30 µV

LW: 50 µV

Power amplifier section

Outputs Speaker outputs

(sure seal connectors)

Speaker impedance 4 – 8 ohms

Maximum power output 40 W × 4 (at 4 ohms)

General

Outputs Telephone ATT control

lead

Power amplifier control

lead

Rear line out (1)

Tone controls Bass ±8 dB at 100 Hz

Treble ±8 dB at 10 kHz

Power requirements 12 V DC car battery

(negative ground)

Dimensions Approx. 188 × 58 × 181 mm

(w/h/d)

Mounting dimensions Approx. 182 × 53 × 164 mm

(w/h/d)

Mass Approx. 1.2 kg

Supplied accessories Parts for installation and

connections (1 set)

Rotary commander

RM-X4S

Front panel case (1)

Optional accessories Bus cable (supplied with

an RCA pin cord)

RC-61 (1 m), RC-62 (2 m)

Optional equipment CD changer

CDX-605 (10 discs)

MD changer MDX-62

Source selector XA-C30

Design and specifications are subject to change without

notice.

Additional Information

Cassette type

TYPE II, IV

TYPE I

61 dB

58 dB

20

EN

Troubleshooting guide

The following checklist will assist in the correction of most problems you may encounter with your

unit.

Before going through the checklist below, refer to the operating procedures.

General

Cause/Solution

• Adjust the volume with (+).

• Set the fader control to the centre position for 2-speaker

systems.

Remove the front panel and clean the connectors. See “Cleaning

the Connectors” in “Maintenance” for details.

• An optional power amplifier is connected to the LINE OUT

and you are not using the built-in amplifier.

• The beep tone is attenuated (page 13).

Problem

No sound

Indications do not appear on

the display window.

No beep tone.

Tape playback

Cause/Solution

Contamination of the tape head. n Clean the head.

• There is noise in the space between tracks.

• A blank space is too short (less than four seconds).

• + on (SEEK/AMS) is pressed immediately before the

following track.

• = on (SEEK/AMS) is pressed immediately after the track

starts.

• A long pause, or a passage of low frequencies or very low

sound level is treated as a blank space.

Problem

Playback sound is distorted.

The AMS does not operate

correctly.

Radio reception

Problem

Preset tuning is not possible.

Automatic tuning is not possible.

The “ST” indication flashes.

Cause/Solution

• Store the correct frequency.

• The broadcast is too weak.

The broadcast is too weak. n Use manual tuning.

• Tune in precisely.

• The broadcast is too weak.

n Press (SENS/BTM) to enter the MONO mode.

RDS functions

Cause/Solution

The station is non-TP or weaken signal.

n Press (AF/TA) until “AF TA” disappears.

• Activate “TA”.

• The station does not broadcast any traffic announcements

despite being TP. n Tune in another station.

The station does not specify the programme type.

Problem

A SEEK starts after a few

seconds of listening.

No traffic announcements

PTY displays “NONE”.

Sidan laddas ...

Sony XR-C5109R Bruksanvisning

Sony XR-C5109R Bruksanvisning

på andra språk

Relaterade papper