Aastra DT690 Quick Reference Manual

Cover Page Graphic

Place the graphic directly on the page, do not care

about putting it in the text flow. Select Graphics >

Properties and make the following settings:

• Width: 15,4 cm (Important!)

• Height: 11,2 cm (May be smaller)

• Top: 5,3 cm (Important!)

• Left: -0,3 cm (Important!)

This text should then be hidden.

DT690 Cordless Phone

for MD Evolution

Quick Reference Guide

LZT 103 083 R2A

MD Evolution – DT690

English ....................................................................................7

Español ................................................................................17

Français ...............................................................................29

Nederlands ........................................................................41

Norsk .................................................................................... 53

Svenska ...............................................................................65

MD Evolution – DT690

5

FCC Statement

This equipment has been tested and found to comply

with the limits for a Class B digital device, pursuant to

Part 15 of the FCC rules.

These limits are designed to provide reasonable protec-

tion against harmful interference in a residential installa-

tion. This equipment generates, uses and can radiate ra-

dio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful in-

terference to radio communications. However, there is

no guarantee that interference will not occur in a partic-

ular installation. If this equipment does cause harmful

interference to radio or television reception, which can

be determined by turning the equipment off and on, the

user is encouraged to try to correct the interference by

one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and

receiver.

• Connect the equipment into an outlet on a circuit dif-

ferent from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV techni-

cian for help.

--------------------------------------------------------------

Privacy of communications may not be ensured when

using this phone.

This equipment complies with FCC radiation exposure lim-

its set forth for an uncontrolled environment. This device

complies with FCC SAR limit of 1.6 W/kg. The highest SAR

value measured when used at the ear is 0.104 W/kg. This

device must not be colocated or operating in conjunction

with any other antenna or transmitter.

• This equipment complies with Part 68 of the FCC rules

and the requirements adopted by the ACTA. On the rear

side, underneath the battery of this equipment is a label

that contains, among other information, a product iden-

tifier in the format US:AAAEQ##TXXXX. If requested, this

number must be provided to the telephone company.

• REN is N/A as this product is intended to be connected

behind a FCC Part 68 compliant PBX system. It is not in-

tended for direct connection to telephone network.

• If this equipment cause harm to the telephone network,

the telephone company will notify you in advance that

temporary discontinuance of service may be required.

But if advance notice isn't practical, the telephone compa-

ny will notify the customer as soon as possible. Also, you

will be advised of your right to file a complaint with the

FCC if you believe it is necessary.

• The telephone company may make changes in its facil-

ities, equipment, operations or procedures that could af-

fect the operation of the equipment. If this happens, the

telephone company will provide advance notice in order

for you to make necessary modifications to maintain un-

interrupted service.

• If trouble is experienced with this equipment, for repair

or warranty information, please contact your Aastra

business partner http://www.aastra.com.

This equipment is not intended to be repaired by the

customer (user). If the equipment is causing harm to

the telephone network, the telephone company may re-

quest that you disconnect the equipment until the prob-

lem is resolved.

• Connection to party line service is subject to state tar-

iffs. Contact the state public utility commission, public

service commission or corporation commission for infor-

mation.

• If your home has specially wired alarm equipment con-

nected to the telephone line, ensure the installation of

this equipment that it does not disable your alarm

equipment. If you have questions about what will disa-

ble alarm equipment, consult your telephone company

or qualified installer.

Electrical Safety Advisory

Electrical surges, typically lightning transients, are very

destructive to customer terminal equipment connected

to AC power sources. Customer is thus recommended

to use a surge arrestor for the equipment that requires

AC power.

7MD Evolution – DT690

English

Important User Information

Copyright

No parts of this publication may be reproduced, stored

in retrieval systems, or transmitted in any form or by any

means, electronic, mechanical, photocopying, recording

or otherwise, without prior written permission of the

publisher except in accordance with the following terms.

When this publication is made available on Aastra media,

Aastra gives its consent to downloading and printing

copies of the content provided in this file only for private

use and not for redistribution. No parts of this publication

may be subject to alteration, modification or commercial

use. Aastra will not be liable for any damages arising from

use of an illegal modified or altered publication.

Aastra is a registered trademark of Aastra Technologies

Limited. All other trademarks mentioned herein are the

property of their respective owners.

Warranty

AASTRA MAKES NO WARRANTY OF ANY KIND WITH

REGARD TO THIS MATERIAL, INCLUDING, BUT NOT

LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANT-

ABILITY AND FITNESS FOR A PARTICULAR PURPOSE.

Aastra shall not be liable for errors contained herein nor

for incidental or consequential damages in connection

with the furnishing, performance or use of this material.

Declaration of Conformity

Hereby, Aastra Telecom Sweden AB, SE-126 37 Hägersten,

declares that this telephone, is in conformity with the

essential requirements and other relevant pros of the

European R&TTE directive 1999/5/EC.

Details to be found at: http://www.aastra.com

Safety Instructions

Note: When using your telephone or connected

equipment, the following basic safety precautions

should always be followed to reduce risk of fire,

electrical shock and other personal injury.

Recommendations

• Always keep and handle your products with care

and keep them in a clean and dust-free place.

Proper use and care will prolong the products life.

Use a soft absorbent tissue or cloth to remove dust,

dirt or moisture.

• Always ensure that the phone, battery and charger

are used and operated in the environment for

which they are designed.

• Operate the phone in temperatures between 0°C

to +40°C (32°F to 104°F).

• Do not expose your products to liquid,

moisture, humidity, solvents, strong

sunlight, harsh environments or

extreme temperatures, never above

+60°C (+140°F), unless the product

has been specifically designed and

officially approved for such environments.

• Exposure to heat may cause batteries

to leak, overheat or explode, resulting

in fire, burns or other injuries.

• Do not put the product in the micro-

wave oven: This may cause damage to

either the oven or the product.

• Do not attempt to disassemble or alter

any part of the phone, the charger(s)

or the battery-pack. Disassembly or

alteration may result in electrical shock

or irreversible damage to the equip-

ment.

Only a qualified service personnel

or an authorized Aastra partner should conduct

internal inspections, alterations and repairs.

• Do not expose your product to open flames or lit

tobacco products.

• Do not drop, throw or bend your products. This

may cause malfunction or electric shock.

• Do not paint your product.

• Do not use your product in an area where a

potentially explosive atmosphere exists, unless

the product has been specifically designed and

officially approved for such environments.

• To avoid hearing impairment, accept the call before

holding your product (or portable handsfree device)

to your ear.

MD Evolution – DT6908

English

Disposal of the product

• Your product should not be placed in

municipal waste. Please check local

regulations for disposal of electronic

products.

Power supply

• Connect the AC power adapter of the charging unit

only to the designated power sources as marked on

the charger.

• Make sure the AC power supply is positioned so

that it will not be subjected to damage or stress.

• To reduce risk of electrical shock, unplug the

chargers from any power source before attempting

to clean or move it.

• The AC power adapters must not be used outdoors

or in damp areas.

• Never modify the cord or plug. If the plug will not fit

into the outlet, have a proper outlet installed by a

qualified electrician.

• Limit the distance between the mains socket and

the cordless phone when charging for easy

accessibility.

• As an energy saving measure, disconnect the

charger from the main socket after charging.

• When unplugging the mains adapter from the

power outlet, make sure that your hands are dry

and ensure that you hold the solid portion of the

mains adapter.

• Do not pull on cables.

• See the complete User Guide for available power

adapters.

Charging and batteries

• Please read carefully the following

important precautions before the first

time use of the batteries. Make sure to

understand and observe all cautionary

instructions stated, so as to avoid any

possible safety hazards that are caused

by any misuse, misapplication or damage to

batteries.

• Only use batteries, mains adapters or desk and rack

chargers which have been specifically designed for

use with your product.

• Use of power sources not explicitly recommend-

ed may lead to overheating, reduced battery per-

formance, distortion of the equipment and fire or

other damages.

• The phone is equipped with Lithium Li-polymer/

Li-Ion battery. In a complex infrastructure, the talk-

and standby time may differ, due to the con-

sequence of the increase in signaling.

• The battery must always be completely charged

(minimal 4 hours) before first time use.

• The battery in your product is designed to withstand

many charge cycles.

• Use only the recommended charging equipment.

• Improper charging can cause heat damage or even

high pressure rupture.

• Observe proper charging polarity.

• Do not solder lead wires directly onto the battery.

• Do not allow water to come into contact with the

battery.

• The battery is replaceable, however it is not the

intention to do this frequently.

• Only charge the battery when placed in the phone.

• Use only the specified battery-packs for your

product.

• Never heat or dispose of the battery into a fire,

which, or else, may cause leakage, burst or fire.

• Remove the carrying case from the product while

in charger.

• Do not cover the product while being charged.

Do not charge the phone in a closed cabinet or

drawer. The charging of the battery is a chemical

process and causes the battery to become warm

during charging. Make sure the environment in

which the phone is charged, is well vented.

• The cordless phone can be charged either when

switched on or off.

• Do not connect the battery's positive and negative

leads altogether in any circumstances.

• Do not strike or drop the battery. It may cause

damage to the battery.

• Do not charge the battery below +5°C

(+41°F). Be sure to charge the battery

between +5°C and +40°C (+41°F and

104°F). Charging beyond these

conditions may impair the battery

performance and shorten the life cycle.

• Do not use battery packs from different types,

brands or of different capacities.

• The battery is to be stored in a dry cool place, with

the ambient temperature of approx. +25°C (+77°F)

for best performance.

• The battery continues to discharge a minimal

portion of its power, even if the product is switched

off or the battery is removed.

• Dispose the battery in accordance with all local

regulations, applicable in your country.

9MD Evolution – DT690

English

Warnings

Smoke or fumes

• Stop operating the products and turn

off immediately in case of smoke or

fumes. Unplug the mains adapter and

remove the batteries from the phone immediately.

Continued operation may result in fire or electrical

shock.

LCD

• If the liquid crystal display breaks, avoid injury by

not allowing the liquid crystal to come into contact

with eyes, skin or mouth. Prevent the liquid crystal

from leaking out of the broken glass.

Preventing malfunction

• Never place the equipment in close proximity

of electric motors, welding equipment or other

devices generating strong (electro) magnetic fields.

Exposure to strong (electro) magnetic fields may

cause malfunction and corrupt the communication.

• Moving the equipment rapidly between warm

and cold temperatures may cause condensation

(water droplets) to form on its internal and external

surfaces. Water droplets may cause malfunction of

the equipment and corrupt or end communication

or damage the equipment. When condensation is

noticed, stop using the equipment. Switch off the

phone, remove the battery and unplug the mains

adapter from the power outlet. Wait until the

moisture evaporates from the equipment before

putting it in operation again.

• Avoid accidental drop of the phone. Use the clip,

security clip or carrying case specified for carrying

purposes of the phone.

• Avoid squeezing the phone between furniture and

your body when carrying the phone in your pocket

or attached to clothing.

MD Evolution – DT69010

English

11MD Evolution – DT690

English

DT690 Cordless Phone

Quick Reference Guide

Main Display Menu

Note: Information displayed can vary depending on version and

configuration of the exchange, or whether the phone is used in a

DECT or an IP DECT system. Consult your system administrator to

find out which type of system your phone is used in.

This Quick Reference Guide includes short descriptions

on how to use the basic features. More features and

technical requirements are available in the User Guide.

The complete User Guide is available in electronic format

on the Enterprise Telephone Toolbox CD and on

www.aastra.com (see MD Evolution platform).

Read the safety instructions before use!

1 Multifunction button (can be programmed

as a short cut to functions)

2 Speaker volume up key

3 Speaker volume down key

4 Headset connector

5Left soft key

6Middle soft key

7Right soft key

8 Off-hook key

9Five-way navigation key

10 On-hook and power on or off

11 Voice mail access

12 Key lock and Upper/Lower case

13 Space

14 Mute key

15 Indicator

16 Display

When you press the soft key Menu, the Messaging tab is marked

by default.

1 Connections

2 Calls

3Short cuts

4My favourites

5Messaging

6Settings

7Profiles

8Contacts

DT690 Cordless Phone Quick Reference Guide

MD Evolution – DT690

12

English

Switch On and Off

Switch on: Press and hold (Until display

lights up)

Ye s (confirm)

Switch off: Press and hold

Ye s (confirm)

Answer Calls

Answer: Press

Handsfree: Press

Headset: Press the answering button on the

headset.

Call pick-up: Press

13 Dial ringing extension

Austria, Italy, U.K., EBN, U.S.A, Canada:

Press

*8*; Norway: Press #13

Group call pick-up: Press

14 for primary grou

(or other defined prefix for

secondary group)

Austria, Italy, U.S.A., Canada: Press 2;

Norway: Press

#14

End call: Press

Reject call: Press

Make Calls

Dial: Dial extension number or external

line and number

Handsfree: Dial number

Common

abbreviated

number:

Dial common abbreviated

number

Dial by contact: Press Menu - Contacts - Call

contact, select contact

Or

Press and hold first character of

name, select name

Note: Contacts marked with cannot be

modified.

Search and dial a

contact:

Press Menu - Contacts - Central

phonebook - Search by name

(or Search by number), enter

name (or number) and press

Search. Select contact

Dial by call list: Press select number

Redial last

external number:

11

Dial from a

text message:

Press Menu - Messaging - Inbox

Select a text message and press

View - More - Call no. in text

(or Call sender)

Silent Ringing and Mute

Mute ringing

telephone:

Press to suppress the

ringing. (Press to answer.)

Switch ring

signal off: Press and hold

Mute microphone

during call: Press and hold during call

Volume

Adjust speaker

volume during a call:

Press the volume up button on the

side of the phone to increase.

Press the volume down button on

the side of the phone to decrease.

Adjust ringing

volume:

Press Menu - Settings - Sound

& Alerts - Volume and adjust with

navigation keys.

Make Calls

13

MD Evolution – DT690

DT690 Cordless Phone Quick Reference Guide

English

Callback

(The busy number calls back when free.)

Order: Press More - Callback

If the function cannot be activated on your

phone by pressing More, press

1 instead.

Intrusion

(Intrude a busy extension to ask the party to hang up.)

Activate: Press

3

Park a Call

Inquiry

(The first call is parked automatically.)

Ongoing

conversation:

Press More - New call,

dial number

If the function cannot be activated on your

phone by pressing More, press soft key R

instead and dial number.

End inquiry: Press More - End call

If the function cannot be activated on your

phone by pressing More, press soft key

R,

and press

1 instead.

Refer back: Press More - Switch

If the function cannot be activated on your

phone by pressing More, press soft key

R,

and press

2 instead.

On hold

Put on hold: Press

R

Resume a call: (within 30 sec)

Conference

Ongoing

conversation:

Press More - New call,

dial number

At answer, press More -

Conference

Repeat to add more.

If the function cannot be activated on your

phone by pressing More, do the following:

Press soft key

R dial number, and press 3

at answer.

Transfer

Ongoing

conversation:

Press More - New call,

dial number

Before or after answer, press

More - Transfer

If the function cannot be activated on your

phone by pressing More, press

R, dial

number, and press

before or after

answer.

Blind transfer: Press More - Transf. to new

dial number

Transfer from

Bluetooth headset

to phone:

Press More - Audio Transfer

Note: Bluetooth is optional, see the User

Guide for more information.

Call Forwarding

Internal diversion

Note: The function requires configuration by the system administrator.

Order: Press Menu - Calls - Call services -

Divert calls.

Select Internal or External, then

Activate. Enter extension number

to divert calls to, and press OK.

Cancel: Press Menu - Calls - Call services -

Divert calls. Select Deactivate and

press OK.

Follow-me

Order follow-me

from other extension

to own extension:

From own extension, press

65

Enter extension number to be

diverted, press and enter

diverted extension password.

Cancel: From own extension, press

66

Enter extension number, press

and enter diverted extension

password.

Order follow-me

from one extension

to another extension:

From own extension, press

65 *

Enter extension number to be

diverted and press

*. Enter

extension number to divert to,

press and enter password.

DT690 Cordless Phone Quick Reference Guide

MD Evolution – DT690

14

English

Cancel: From own extension, press 66

Enter extension number, press

and enter diverted extension

password.

Variable diversion

Order: Dial prefix and then diversion

number

Prefix 61: Forward all calls

Prefix

62: Forward on no reply

Prefix

63: Forward on busy

Prefix

69: Forward on no reply or busy

Cancel:

60

Forward to mini-message

Order:

* 2 Enter a mini-message code

and completing information

(if requested)

*

0 HAS CALLED YOU BACK

1

WILL CALL YOU BACK

2

WOULD LIKE TO SEE YOU

3

IN A MEETING UP TO [HH:MM]

4

ABSENT UNTIL [MM-DD]

5

IN CASE OF EMERGENCY CALL [ NNNN]

6

PLEASE CALL BACK IN A FEW MINUTES

8

BUSY - RETURN TIME [HH:MM]

9

ABSENT - RETURN DATE [MM-DD]

Note: The mini-messages above are default

messages which can be modified by the

system administrator.

Cancel:

60

Call Forwarding Voice Mail (Optional)

New voice mail

message received:

A new voice mail message is

indicated in the status bar by the

icon and a pop-up dialog box

where you can select Ye s or No.

Press Ye s to open the mailbox.

A new message is displayed. Press

Call to listen to the voice mail

message, or press Close to close

the mailbox.

Press No to open the mailbox later.

Enter the mailbox: Press Menu - Messaging - Inbox

Or

Press and hold

1

Note: Press and hold 1 requires that a voice

mail number has been configured to the

Voice Mail button. Please contact your

system administrator.

SMS (Optional)

(You can send and receive text messages to and from

other phones in the system.)

New text message:

Read message: Press Ye s to read it directly.

Press No to read it later.

Write and send

message:

Press Menu - Messaging - Write

new Message. Write the message,

and press Send. Enter the number

and press Send.

15

MD Evolution – DT690

DT690 Cordless Phone Quick Reference Guide

English

Contacts

Add contact: Press Menu - Contacts - Add

contact - From call list, select

a contact and press Add.

Or

Press Menu - Contacts - Add

contact - New - Add. Enter

contact details and press OK after

each detail. Press Save.

Edit contact: Press Menu - Contacts - Edit

contact. Select contact and press

Edit, edit the contact and press OK,

then Save.

Delete contact: Press Menu - Contacts - Delete

contact. Select contact and press

Delete, then Yes to confirm.

Absence Information

Pre-defined text

Note: The function requires configuration by the system administrator.

Select absence

reason:

Press Menu - Calls - Call services.

Press Absence - Select absence

reason and enter time or date

(if requested). Press OK

Cancel: Press Menu - Calls - Call services -

Absence - Deactivate

Display Language

Change display

language:

Press Menu - Settings -

Language and select one of the

languages from the list.

Time and Date

Set time format: Press Menu - Settings - Time

&Date - Time format and select

the desired option.

Set date format: Press Menu - Settings - Time

& Date - Date format and select

the desired option.

Program Soft Keys and Hot Keys

Soft keys: Press Menu - Short cuts -

Soft keys.

Choose Left, Middle or Right

and press Select.

Select Name enter the name and

press OK.

Select Function, choose a function

and press Back.

Select Value (only for some

functions).

Select Control question.

Hot keys: Press Menu - Short cuts -

Hot keys.

Select a number from the list.

Select a Function.

Select Control question.

Navigation keys: Press Menu - Short cuts -

Navigation keys.

Select Up, Down, Left or Right

and press Select.

Select Function, choose a function

and press Select and then Back.

Select Value (only for some

functions).

Select Control question.

Multifunction

button:

Press Menu - Short cuts -

Multifunction button.

Select Long Press or Multi press.

Select a Function.

Select Control question.

Profiles

Add profile: Press Menu - Profiles - Add new.

Enter profile name and press Save.

Make the desired settings and press

Back to confirm each setting.

Delete profile: Press Menu - Profiles.

Select the profile to delete and

press More - Delete - Yes.

DT690 Cordless Phone Quick Reference Guide

MD Evolution – DT690

16

English

Favourites

Add favorite: Press Menu - My favourites - Edit

favourites. Select a menu by

pressing Change. Repeat to add

more. Press Back to confirm.

Bluetooth (Optional)

Enable Bluetooth: Press Menu - Connections. Select

Bluetooth, and then Enable.

Disable Bluetooth: Press Menu - Connections. Select

Bluetooth, and then Disable.

Connect Bluetooth

headset:

Press Menu - Connections. Select

Bluetooth, and press Select.

Select Headset and press Select.

Select Add new and press Select

and then OK. Press Pair, enter the

Bluetooth headset PIN code and

press OK to confirm.

Charging the Battery

To charge the battery, place the phone in a desk charger

or a rack charger.

Note: An orange light indicates that the phone battery is being charged.

The light turns green and is displayed to indicate that the battery is fully

charged.

Replacing the Battery

To remove the battery, do the following:

1. Switch off the phone and open the battery

compartment.

2. Remove the battery attached to the lid, and replace

with a new battery.

Accessories

The following accessories are available:

Also available:

• Headset with microphone integrated in cable

•Security string

•Rack charger

• Battery pack rack charger

Carry case

with belt clip

Swivel clip

Headset with

microphone on boom

Standard clips Desk chargerDesk PDM charger

17MD Evolution – DT690

Español

Información importante para el usuario

Copyright

reservados.

Ninguna parte de esta publicación puede reproducirse,

almacenarse en sistemas de recuperación ni transmitirse

de ninguna forma ni en ningún tipo de soporte, ya sea

electrónico, mecánico, fotocopia, grabación u otros, sin

el consentimiento previo por escrito del editor excepto

en lo dispuesto en los términos siguientes:

Cuando esta publicación esté disponible en algún

soporte de Aastra, Aastra autoriza la descarga y la

impresión de copias del contenido proporcionado

en el archivo, únicamente para uso privado y no para

posterior distribución. Está prohibida la edición, la

modificación o el uso para fines comerciales de cualquier

parte de esta publicación. Aastra no se hará responsable

de los daños que puedan surgir del uso de una publicación

modificada o alterada.

Aastra es una marca registrada de Aastra Technologies

Limited. El resto de las marcas registradas aquí mencio-

nadas son propiedad de sus respectivos propietarios.

Garantía

AASTRA NO CONCEDE GARANTÍAS DE NINGÚN TIPO EN

RELACIÓN CON ESTE MATERIAL, INCLUIDAS, AUNQUE

SIN LIMITACIÓN, LAS GARANTÍAS IMPLÍCITAS DE

COMERCIALIZACIÓN E IDONEIDAD PARA UN PROPÓSITO

DETERMINADO. Aastra no se responsabilizará de los

errores contenidos en esta publicación ni de los daños

accidentales o indirectos relacionados con la provisión,

el rendimiento o el uso de este material.

Declaración de conformidad

Por la presente, Aastra Telecom Sweden AB, SE126 37

Hägersten, declara que este teléfono cumple con los

requisitos esenciales y otras disposiciones relevantes

de la directiva europea R&TTE 1999/5/EC.

Puede encontrar más información en:

http://www.aastra.com

Instrucciones de seguridad

Nota: Al utilizar el teléfono o el equipo conectado, deben

respetarse siempre las siguientes precauciones básicas

de seguridad para reducir el riesgo de incendio,

electrocución u otros daños personales.

Recomendaciones

• Utilice siempre los productos con precaución y

guárdelos en un lugar limpio y sin polvo. Un uso

y cuidado adecuados prolongarán la vida de los

productos. Utilice un paño o tejido absorbente para

eliminar el polvo, la suciedad o la humedad.

• Asegúrese siempre de que el teléfono, la batería

y el cargador se utilizan y manejan en el entorno

para el que fueron diseñados.

• Utilice el teléfono a temperaturas entre 0 °C y

+40°C.

• No exponga sus productos a líquidos,

humedad, disolventes, luz solar directa,

ambientes inadecuados o tempera-

turas extremas, nunca por encima de

60 °C, salvo que el producto haya sido

especialmente diseñado y oficialmente

certificado para este tipo de entornos.

• La exposición al calor puede provocar

fugas en las baterías, así como el

sobrecalentamiento o la explosión de

éstas, lo que podría causar un incendio,

quemaduras u otras lesiones.

• No introduzca el producto en un horno microondas:

podrían producirse daños en el horno o en el

producto.

• No intente desmontar o modificar

ningún componente del teléfono, el

cargador o la batería. Podría producirse

una descarga eléctrica o daños irrever-

sibles en el equipo.

Las inspecciones

internas, modificaciones o reparaciones

del producto deben llevarse a cabo por parte

de personal de mantenimiento cualificado o un

representante autorizado de Aastra.

• No exponga el producto a las llamas ni a productos

de tabaco encendidos.

• No deje caer, arroje ni doble los productos. Podría

producirse un fallo de funcionamiento o una

descarga eléctrica.

• No pinte el producto.

• No utilice el producto en una zona potencialmente

explosiva, salvo que el producto haya sido especial-

mente diseñado y oficialmente certificado para

este tipo de entornos.

• Para evitar la pérdida de la capacidad auditiva,

acepte la llamada antes de acercarse el producto

(o dispositivo de manos libres portátil) a la oreja.

MD Evolution – DT69018

Español

Desecho del producto

• No tire el producto a un vertedero de

basura municipal. Consulte la normativa

local sobre desecho de productos

electrónicos.

Fuente de alimentación

• Conecte el adaptador eléctrico de corriente alterna

(CA) de la unidad cargadora únicamente a las

tomas eléctricas especificadas en el cargador.

• Asegúrese de que la fuente de alimentación de CA

se coloca de modo que no esté sometida a tensión

ni expuesta a ningún tipo de presión.

• Para reducir el riesgo de descarga eléctrica,

desconecte el cargador de cualquier toma de

corriente antes de limpiarlo o moverlo.

• El adaptador de CA no debe usarse al aire libre ni

en zonas húmedas.

• No altere el cable ni la clavija. Si la clavija no encaja en

la toma, pida a un electricista cualificado que le

instale una toma adecuada.

• Cuando cargue la batería, limite la distancia entre la

toma de corriente y el teléfono inalámbrico para

poder acceder con facilidad.

• Como medida de ahorro energético, desconecte el

cargador de la fuente de alimentación principal tras

el proceso de carga.

• Cuando desconecte el adaptador de la toma de

corriente, asegúrese de tener las manos secas y

de coger la parte sólida del adaptador de

alimentación.

• No tire de los cables.

• Consulte los adaptadores disponibles en la Guía

del usuario completa.

Carga y baterías

• Lea atentamente las siguientes

precauciones importantes antes de

utilizar por primera vez las baterías.

Asegúrese de que comprende y sigue

todas las instrucciones de prevención

mencionadas para evitar posibles

riesgos para la seguridad debido a un mal uso,

un mal manejo o una avería en las baterías.

• Utilice sólo baterías, adaptadores de alimentación

y cargadores de sobremesa o rack que hayan sido

especialmente diseñados para el uso con

el producto.

• El uso de fuentes de alimentación que no estén

recomendadas específicamente puede provocar

un sobrecalentamiento, un mal funcionamiento de

las baterías, una alteración en el equipo y fuego u

otros daños.

• El teléfono está equipado con una batería de polí-

meros de litio/iones de litio. En una infraestructura

compleja, los tiempos de conversación y espera

pueden diferir debido al incremento de la

señalización.

• La batería debe estar totalmente cargada (mínimo

4 horas) antes de usarse por primera vez.

• La batería del producto se ha diseñado para

soportar muchos ciclos de carga.

• Utilice únicamente el equipo de carga

recomendado.

• Una carga inapropiada puede producir daños por

calentamiento o incluso rotura por alta presión.

• Tenga en cuenta la polaridad de carga.

• No suelde hilos conductores directamente a la

batería.

•No moje la batería.

• La batería es sustituible; sin embargo, no es

necesario sustituirla con frecuencia.

• Cargue las baterías únicamente cuando estén

dentro del teléfono.

• Utilice sólo baterías específicas para su producto.

• No caliente ni tire las baterías al fuego, ya que

podrían incendiarse o producirse fugas o explosiones.

• Extraiga la funda protectora del producto mientras

esté en el cargador.

• No cubra el producto mientras se esté cargando.

No cargue el teléfono en un armario o cajón cerrados.

La carga de la batería es un proceso químico que

provoca que ésta se caliente. Asegúrese de que

el lugar en el que carga el teléfono esté bien

ventilado.

• El teléfono inalámbrico se puede cargar tanto

encendido como apagado.

• En ningún caso conecte los polos positivo y

negativo de la batería juntos.

• No golpee ni deje caer la batería, ya que podría

dañarse.

• No cargue la batería a temperaturas

inferiores a 5 °C. Cargue la batería a

temperaturas entre 5 °C y 40 °C. La

carga en condiciones diferentes a las

especificadas podría perjudicar el

rendimiento de la batería y reducir

su ciclo de vida.

• No utilice baterías de diferentes tipos o marcas,

o de diferentes capacidades.

• La batería debe guardarse en un lugar fresco y seco

con una temperatura ambiente de aprox. 25 °C para

un óptimo rendimiento.

• La batería sigue descargando una parte mínima de

su energía aunque el producto esté apagado o se

haya extraído la batería.

• Deseche la batería conforme a las normativas

locales aplicables en su país.

19MD Evolution – DT690

Español

Advertencias

Humo o gases

• Deje de utilizar los productos y

apáguelos inmediatamente en

presencia de humo o gases.

Desconecte el adaptador de alimentación y

extraiga las baterías del teléfono inmediatamente.

El funcionamiento continuado podría provocar un

incendio o descarga eléctrica.

LCD

• Si se rompe la pantalla de cristal líquido, no deje

que éste entre en contacto con los ojos, la piel o la

boca para evitar daños. Intente evitar que el cristal

líquido salga del cristal roto.

Evitar las averías

• No coloque nunca el equipo cerca de motores

eléctricos, equipos de soldadura u otros disposi-

tivos que generen campos (electro)magnéticos

fuertes. La exposición a campos (electro)-

magnéticos fuertes puede ocasionar un mal

funcionamiento del producto y perjudicar la

comunicación.

• Si el equipo se traslada rápidamente de una

temperatura cálida a otra fría puede ocasionarse

una condensación (gotitas de agua) en las super-

ficies internas y externas. Las gotitas de agua

pueden provocar una avería en el equipo, perjudicar

o cortar la comunicación, o dañarlo. Si percibe

condensación, deje de utilizar el equipo. Apague

el teléfono, extraiga la batería y desconecte el

adaptador de alimentación de la toma de corriente.

Espere a que se evapore la humedad del equipo

antes de volver a ponerlo en funcionamiento.

• Evite que el teléfono caiga accidentalmente.

Utilice la pinza, la pinza de seguridad o la funda de

transporte indicadas para transportar el teléfono.

• Evite que el teléfono quede oprimido entre otros

objetos y su cuerpo cuando lo lleve en el bolsillo

o colgado de la ropa.

MD Evolution – DT69020

Español

Sidan laddas ...

Aastra DT690 Quick Reference Manual

Aastra DT690 Quick Reference Manual

på andra språk

Relaterade papper

Andra dokument