Dometic Oceanair Skyscreen Powered Bruksanvisningar

Typ
Bruksanvisningar
WINDOWS, DOORS &
LIGHTS
SKYSCREEN
Dometic Oceanair Skyscreen Powered
Roofblind
Installation and Operating Manual . . . . .13
Dachrollo
Montage- und Bedienungsanleitung . . 25
Store de toit
Instructions de montage
et de service . . . . . . . . . . . . . . . . . . . . . . 39
Estor de techo
Instrucciones de montaje y de uso . . . . 52
Oscurante
Istruzioni di montaggio e d’uso . . . . . . . 65
Dakgordijn
Montagehandleiding en
gebruiksaanwijzing. . . . . . . . . . . . . . . . . 78
Tagrullegardin
Monterings- og betjeningsvejledning. . .91
Takmonterad rullgardin
Monterings- och bruksanvisning . . . . . 103
Rullegardin for tak
Monterings- og bruksanvisning . . . . . . . 115
Kattokaihdin
Asennus- ja käyttöohje. . . . . . . . . . . . . . 127
天窗
安装和使用說明書 . . . . . . . . . . . . . . . . . 139
EN
DE
FR
ES
IT
NL
DA
SV
NO
FI
ZH
© 2023 Dometic Group. The visual appearance of the contents of this manual is protected by
copyright and design law. The underlying technical design and the products contained herein may
be protected by design, patent or be patent pending. The trademarks mentioned in this manual
belong to Dometic Sweden AB. All rights are reserved.
3
Skyscreen Powered
1 2
3
4
5
6
8
7
9
1
2.
1.
2. 1.
2
Skyscreen Powered
4
2.
1.
3.
B
D
A
C
A
C
A
C
3
3.
1.
2.
4. A
C
A
C
4
5
Skyscreen Powered
2.
1.
3.
B
D
B
D
5
1.
2.
3.
4.
B
D
B
D
6
Skyscreen Powered
6
XX XX
XX XX
7
1.
2.
1. 2.
8
7
Skyscreen Powered
3 mm 3 mm
90°
90°
9
4x
1.
max.
6 mm
6x
3.
2.
0
Skyscreen Powered
8
4.
2.
90°
1.
3.
a
9
Skyscreen Powered
3.
2.
1.
b
Skyscreen Powered
10
bk rd
MOTOR
Dometic Radio Receiver
Dometic 9 Chn,
433 Mhz Transmitter
HEADRAIL
Atlantic: wh
Atlantic: wh/bk
12 V/24 V g
12 V/24 V DC
Atlantic 24S - Double End 24 V g
12 V g
Atlantic 12S - Double End
1
2
3
4
c
Dometic 9 Chn,
433 Mhz Transmitter
HEADRAIL
12 V/24 V gAtlantic 24S - Double End 24 V g
12 V g
Atlantic 12S - Double End
1
2
3
d
11
Skyscreen Powered
bk
rd
HEADRAIL
12/24 Vg
Atlantic 24S - Double End
Somfy LV25-B64
24 V g
12 V g
24 V g
Atlantic 12S - Double End
Atlantic: wh
Somfy: wh
Atlantic: wh/bk
Somfy: wh/gr
15
3
2
e
bk rd
MOTOR
DC RTS HEADRAIL
Atlantic: wh
Atlantic: wh/bk
24 V gAtlantic 24S - Double End 24 V g
1
2
3
4
f
HEADRAIL
24 V gAtlantic 24S - Double End 24 V g
Somfy
1
2
3
g
Skyscreen Powered
12
d800 mm
d800 mm
t284 mm
69 mm
d800 mm
d800 mm
t284 mm
69 mm
h
13
EN
Skyscreen Powered Explanation of symbols
Please read these instructions carefully and follow all instructions, guidelines, and warnings included in this product manual in order to ensure that you install, use,
and maintain the product properly at all times. These instructions MUST stay with this product.
By using the product, you hereby confirm that you have read all instructions, guidelines, and warnings carefully and that you understand and agree to abide by
the terms and conditions as set forth herein. You agree to use this product only for the intended purpose and application and in accordance with the instructions,
guidelines, and warnings as set forth in this product manual as well as in accordance with all applicable laws and regulations. A failure to read and follow the
instructions and warnings set forth herein may result in an injury to yourself and others, damage to your product or damage to other property in the vicinity. This
product manual, including the instructions, guidelines, and warnings, and related documentation, may be subject to changes and updates. For up-to-date prod-
uct information, please visit documents.dometic.com.
Contents
1 Explanation of symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
2 Safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
3 Scope of delivery. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
4 Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
5 Intended use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
6 Technical description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
7 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
8 Operation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
9 Cleaning and maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
10 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
11 Warranty. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
12 Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
1 Explanation of symbols
!
!
A
I
WARNING!
Safety instruction: Indicates a hazardous situation that, if not avoided, could
result in death or serious injury.
CAUTION!
Safety instruction: Indicates a hazardous situation that, if not avoided, could
result in minor or moderate injury.
NOTICE!
Indicates a situation that, if not avoided, can result in property damage.
NOTE
Supplementary information for operating the product.
EN
Safety instructions Skyscreen Powered
14
2 Safety instructions
!WARNING! Failure to obey these warnings could result in death or seri-
ous injury.
Electrocution hazard (only for powered blinds)
Do not operate the device if it is visibly damaged.
If the power cable for this device is damaged, it must be replaced by the man-
ufacturer, customer service or a similarly qualified or competent person in
order to prevent safety hazards.
Inadequate repairs may cause serious hazards.
Disconnect the blind from the power supply before carrying out any mainte-
nance.
Health hazard
Important safety instructions. It is important for the safety of persons to follow
these instructions. Save these instructions.
This device can be used by children aged from 8 years and above and per-
sons with reduced physical, sensory or mental capabilities or lack of experi-
ence and knowledge if they have been given supervision or instruction
concerning use of the device in a safe way and understand the hazards
involved.
Children shall not play with the device.
Cleaning and user maintenance shall not be made by children without super-
vision.
Blinds should be stowed before maneuvering to ensure no restriction of the
driver vision.
Only for powered blinds:
Do not fit powered blinds to escape hatches.
Modification of the design or configuration of the equipment without
express permission of the manufacturer may create a dangerous situation.
Do not allow children to play with the control device of the internal blind.
Keep remote controls away from children.
Frequently examine the installation for signs of wear or damage to cables.
Do not use if repair is necessary.
Do not operate when maintenance, such as window cleaning, is being
carried out in the vicinity.
Suffocation hazard
This device contains small parts. Keep it away from children under 3 years.
The packaging includes plastic bags. Keep them away from children under
3 years.
15
EN
Skyscreen Powered Scope of delivery
!CAUTION! Failure to obey these cautions could result in minor or mod-
erate injury.
Risk of injury
The device must only be installed, removed or repaired by qualified or com-
petent person using suitable fastening material.
Take reasonable precaution when installing the blind and wear appropriate
personal protective equipment.
Only for boats and yachts: If the blind is in front of an open window, then
the blind should be stowed when driving at more than 10 knots or in a sea
state of more than moderate, as this can cause damage to the blind. Parts that
come loose may injure persons in the vicinity.
ANOTICE!
Damage hazard
Blinds should be stowed completely when boat or vehicle is under way.
Use screws and plugs suitable for the wall construction to fix the blind.
Ensure that you do not drill through the wall.
Ensure that your hands are clean or wear suitable gloves to avoid marking the
fabric.
Only for powered blinds:
Check that the voltage specification on the cable label is the same as that
of the power supply.
Only use cables with a suitable cross-section.
3 Scope of delivery
Item in
fig. 1, page 3 Quantity Description
1 4 Corner cover (optional)
2 4 Full cover (head rail) (optional)
34Corner screw
44Corner plate
5 dependent on type Head rail
62Side track
7 2 per panel and
moving rail
Glider
8 2 Full cover (side track) (optional)
9 dependent on type Fabric cassette panel
EN
Accessories Skyscreen Powered
16
4 Accessories
Accessories are available using the separate order form. You can find your autho-
rized customer service center at dometic.com.
5 Intended use
The roofblind is suitable for:
Installation in yachts and boats
Installation in caravans and motor homes
Horizontal installation
The design and size of the blinds are custom-made. The fabric of the blinds is cut
to fit the customer‘s specifications.
The blinds are designed for interior use only and should not be installed in bath-
rooms, wet rooms or other locations with a high level of humidity.
This product is only suitable for the intended purpose and application in accor-
dance with these instructions.
This manual provides information that is necessary for proper installation and/or
operation of the product. Poor installation and/or improper operating or main-
tenance will result in unsatisfactory performance and a possible failure.
The manufacturer accepts no liability for any injury or damage to the product
resulting from:
Incorrect assembly or connection, including excess voltage
Incorrect maintenance or use of spare parts other than original spare parts
provided by the manufacturer
Alterations to the product without express permission from the manufacturer
Use for purposes other than those described in this manual
Dometic reserves the right to change product appearance and product
specifications.
6 Technical description
The blinds are available for a connection to 12 Vg or 24 Vg.
The motor can be controlled using:
• Switches
AP Remote control
Central control systems
Day/Night Controller
17
EN
Skyscreen Powered Installation
The number on the product label in the head rail indicates the blind type.
I
7 Installation
!
!
7.1 Frame assembly (only flat pack version)
A
Proceed as follows:
1. Slide grommet away from coupling and loosen the coupling from the shaft
of the head rail (fig. 2, page 3).
2. Unscrew locking ring on two part spline coupling (fig. 2, page 3).
3. Slide male part away from female part to disengage shaft (fig. 2, page 3).
4. Push belt through housing sprocket (fig. 3, page 4 and fig. 5, page 5).
5. Assemble the head rail to the side track noting the correct belt channels to
use (fig. 3, page 4 to fig. 6, page 5).
6. Ensure the gliders are at the same distance from the frame (fig. 7, page 6).
7. Re-assemble the couplings on the shaft (fig. 8, page 6).
NOTE
The motors have a built-in, self resetting thermal cut-out for safety reasons.
Prolonged use or over loading the blind could trigger the cut-out. If this
happens allow the motor to cool for up to half an hour.
WARNING! Risk of injury
Disconnect the power supply before you begin and ensure that it can not
be reconnected until installation has been completed.
Assemble and fit the frame the with two people if the blind is large or the
mounting location is difficult to reach alone.
CAUTION! Risk of injury
Important safety instructions. Follow all instructions since incorrect installation
can lead to severe injury.
NOTICE! Damage hazard
When unpacking, leave the blue tape on the side tracks to aid assembly.
The end of belt must be kept packaged until it is assembled to the moving
rail to prevent crushing.
Ensure that the frame is not twisted during installation, as distortion will
damage the blind and affect the operation of the blind.
EN
Installation Skyscreen Powered
18
7.2 Frame fitting
A
Proceed as shown:
1. Align the blind with the window cut-out and mark where the holes are to be
drilled for the frame.
2. Ensure the frame is square within the recess by using a measuring device.
Measure the outside corner of the frame to the opposite outside corner and
repeat for the other two corners. These measurement should be within
3 mm of each other (fig. 9, page 7).
3. Fix the frame with the screws to the ceiling (fig. 0, page 7).
If packing of tracks is required do not fully tighten the screws before packers
are in place as this can cause damage to the tracks.
It might be easier to loosely fit the four corner screws (1.) first to position and
hold the blind while the main fixings (2.) are fitted.
7.3 Fitting the moving rails and fabric cassette panels
Before fitting the fabric panel observe the following:
Check whether the moving rail is square and moves freely before fitting any
of the other panels. If the moving rail is not square it can be adjusted as shown
(fig. 8, page 6).
Ensure that the gliders are inserted into moving rail correctly and are free to
move (fig. a, page 8).
For fitting the blind panels proceed as follows:
1. Fit the moving rail (fig. a, page 8, 1 and 2). Dependent on the version the
blind is equipped with one or two moving rails.
Connect the power (see chapter “Electrical installation” on page 19) and
drive the moving rail away from the head rail before fitting the panels. There
is not enough space to fit the panels with the shoes in the shipped position.
2. Clip the fabric cassette panel to the shoes (fig. a, page 8, 3 and 4).
NOTICE! Damage hazard
Use packing material where required (fig. 9, page 7).
Use suitable screws and plugs for the wall construction to fix the frame to
the recess. Pre-drill at the marked points.The heads of screws may be no
larger than 6.0 mm in diameter.
Ensure not to drill through the wall.
Ensure not to damage the channel in the side tracks.
Take care not to leave screws or other debris inside the side tracks as this
can jam the shoes in the tracks.
19
EN
Skyscreen Powered Installation
7.4 Fitting the cover (optional)
Proceed as shown (fig. b, page 9).
7.5 Electrical installation
The powered blinds are available for a connection to a 12/24 Vg power supply.
The data plate on the head rail provides important information on the specifica-
tions of the motor.
The following notes must be observed when connecting the blinds:
Ensure cables are not damaged during installation. Routings of cables
through walls or bulkheads must be protected and insulated by appropriate
bushing, grommets or cable conduits.
Ensure that a 12 V or 24 V stabilized power supply line is available for the
drive at the point of installation. The power supply line is suitably arranged
and protected.
The product must be connected to the correct power supply as specified on
the product label. The motor in the product is designed to cut out when a set
current is exceeded but the supply should be fused to protect the wiring to
the product.
Secure all cables to prevent any contact with moving parts.
Only use power supply units and control elements recommended by the
manufacturer to prevent damage or faults during operation caused by incom-
patible electrical components.
Control devices (e.g. switches) must be installed in visible locations.
One regulated power supply of the required specification is required per
motor as failure to do so may cause the motor to function improperly.
Any adjustment of set stop positions should only be made using the method
specified for the motor type to avoid damage to the motor.
Connect the motor as shown in the wiring diagrams:
Dometic radio controlled blind internal receiver (fig. c, page 10)
Dometic radio controlled blind external receiver (fig. d, page 10)
Manually switched blind (fig. e, page 11)
Somfy radio controlled blind external receiver (fig. f, page 11)
Somfy radio controlled blind internal receiver (fig. g, page 11)
The electrical power supply must be connected by a qualified electrician who
has demonstrated skill and knowledge related to the construction and opera-
tion of electrical equipment and installations and has received safety training to
identify and avoid the hazards involved.
EN
Operation Skyscreen Powered
20
Key to wiring diagrams
I
8Operation
A
I
Only if operated by switches: When operating the blind with switches
each switch operates each blind independently.
Only if operated with AP Remote control: When operating the blind
with an AP Remote control each fabric end is independently operated via
separate channels on the remote control. More than one blind can be added
to the same channel.
Each blind can be stopped in any position.
Pos. Description
1Power supply
2Head rail
3 Head rail motor options
4 External receiver
5 Customer supplied DPDTswitch (double pole, double throw), center off,
latching or momentary, 12 Vg/24 Vg, 3 A)
bk Black
rd Red
gr Gray
wh White
NOTE
Accessories are available using the separate order form.
Observe the applicable documents for the controls and the operating
elements.
NOTICE! Damage hazard while driving
Only for boats and yachts: If the blind is fitted beneath an open sunroof,
then the blind should be stowed when driving at more than 10 knots or with a
sea state of more than moderate, because this can damage the blind. Parts that
come loose may injure people in the vicinity.
NOTE
When operating the blind using switches or an automation
system: If the movement direction is reversed too quickly, the motor might
not detect the polarity change and will just stop. To prevent this, the power
must be off for at least 0.5 seconds before the movement direction is
reversed.
When the motor is stopped the power consumption falls. After approxi-
mately 4 minutes the motor automatically switches off.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120
  • Page 121 121
  • Page 122 122
  • Page 123 123
  • Page 124 124
  • Page 125 125
  • Page 126 126
  • Page 127 127
  • Page 128 128
  • Page 129 129
  • Page 130 130
  • Page 131 131
  • Page 132 132
  • Page 133 133
  • Page 134 134
  • Page 135 135
  • Page 136 136
  • Page 137 137
  • Page 138 138
  • Page 139 139
  • Page 140 140
  • Page 141 141
  • Page 142 142
  • Page 143 143
  • Page 144 144
  • Page 145 145
  • Page 146 146
  • Page 147 147
  • Page 148 148
  • Page 149 149
  • Page 150 150
  • Page 151 151
  • Page 152 152

Dometic Oceanair Skyscreen Powered Bruksanvisningar

Typ
Bruksanvisningar