Yamaha CC-5 Användarmanual

Kategori
Soundbar-högtalare
Typ
Användarmanual

Denna manual är också lämplig för

IMPORTANT!
Please record the serial number of this
unit in the space below.
Model:
Serial No.:
The serial number is located on the rear
of the unit.
Retain this Owner’s Manual in a safe
place for future reference.
WARNING
TO REDUCE THE RISK OF FIRE OR
ELECTRIC SHOCK, DO NOT EXPOSE
THIS UNIT TO RAIN OR MOISTURE.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK), NO USER-SERVICEABLE
PARTS INSIDE, REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead
symbol, within an equilateral triangle,
is intended to alert you to the
presence of uninsulated “dangerous
voltage” within the product’s
enclosure that may be of sufficient
magnitude to constitute a risk of
electric shock to persons.
The exclamation point within an
equilateral triangle is intended to alert
you to the presence of important
operating and maintenance
(servicing) instructions in the
literature accompanying the
appliance.
Explanation of Graphical Symbols
CAUTION
Natural Sound Mini Component System
Active Servo Processing Speaker System
20 FM/10 AM Station Automatic Storing Capability
Double Cassette Tape Deck with Automatic Reverse Function
Tape “a” and “b” Continuous Playback Capability
Automatic Synchronized Recording with CD Playback
Automatic CD Editing Function for Recording to Tape
2-Way Speed Dubbing
Dolby B/C Noise Reduction System
3-Mode Sound Processor
Quick and Easy Direct Playback Function
Multi-Use Timer/Sleep Timer
Remote Control Capability
CC-5
Thank you for selecting this YAMAHA mini component system.
This system is composed of TCD-CC5, A-CC5, K-CC5 and NS-CC5.
OWNER’S MANUAL
Active Servo
Technology
CONTENTS
Safety Instructions ..............
Inside Front Cover
Supplied Accessories ..............................1
Precautions ..............................................2
Active Servo Technology .........................3
Names of Controls, Indicators and Rear
Panel Parts ..........................................4–6
Remote Control Transmitter.................7–9
Preparation for Use ..........................10–11
Setting the Clock ....................................12
Compact Disc Operation ..................12–18
Tuner Operation ...............................19–21
Cassette Tape Operation .................22–24
Sound Control.........................................25
Recording.........................................26–30
How to Use the Built-in Timer...........31–33
Using External Units.........................34–35
Maintenance...........................................35
Specifications .........................................36
Troubleshooting......................................37
1 Read Instructions – All the safety and operating
instructions should be read before the unit is operated.
2 Retain Instructions – The safety and operating instructions
should be retained for future reference.
3 Heed Warnings – All warnings on the unit and in the
operating instructions should be adhered to.
4 Follow Instructions – All operating and other instructions
should be followed.
5 Water and Moisture – The unit should not be used near
water – for example, near a bathtub, washbowl, kitchen
sink, laundry tub, in a wet basement, or near a swimming
pool, etc.
6 Carts and Stands – The unit should be used only with a
cart or stand that is recommended by the manufacturer.
6A A unit and cart combination should
be moved with care. Quick stops,
excessive force, and uneven
surfaces may cause the unit and
cart combination to overturn.
7 Wall or Ceiling Mounting – The unit
should be mounted to a wall or ceiling only as
recommended by the manufacturer.
8 Ventilation – The unit should be situated so that its
location or position does not interfere with its proper
ventilation. For example, the unit should not be situated
on a bed, sofa, rug, or similar surface, that may block the
ventilation openings; or placed in a built-in installation,
such as a bookcase or cabinet that may impede the flow
of air through the ventilation openings.
9 Heat – The unit should be situated away from heat
sources such as radiators, stoves, or other appliances that
produce heat.
10 Power Sources – The unit should be connected to a power
supply only of the type described in the operating
instructions or as marked on the unit.
11 Power-Cord Protection – Power-supply cords should
be routed so that they are not likely to be walked on or
pinched by items placed upon or against them, paying
particular attention to cords at plugs, convenience
receptacles, and the point where they exit from the unit.
12 Cleaning – The unit should be cleaned only as
recommended by the manufacturer.
13 Nonuse Periods – The power cord of the unit should be
unplugged from the outlet when left unused for a long
period of time.
14 Object and Liquid Entry – Care should be taken so that
objects do not fall into and liquids are not spilled into the
inside of the unit.
15 Damage Requiring Service – The unit should be serviced
by qualified service personnel when:
A. The power-supply cord or the plug has been damaged;
or
B. Objects have fallen, or liquid has been spilled into the unit;
or
C. The unit has been exposed to rain; or
D. The unit does not appear to operate normally or exhibits a
marked change in performance; or
E. The unit has been dropped, or the cabinet damaged.
16 Servicing – The user should not attempt to service the unit
beyond those means described in the operating
instructions. All other servicing should be referred to
qualified service personnel.
17 Power Lines – An outdoor antenna should be located
away from power lines.
18 Grounding or Polarization – Precautions should be taken
so that the grounding or polarization is not defeated.
19 Outdoor Antenna Grounding – If an outside antenna is
connected to this unit, be sure the antenna system is
grounded so as to provide some protection against voltage
surges and built-up static charges. Article 810 of the
National Electrical Code, ANSI/NFPA 70, provides
information with regard to proper grounding of the mast
and supporting structure, grounding of the lead-in wire to
an antenna discharge unit, size of grounding conductors,
location of antenna discharge unit, connection to
grounding electrodes, and requirements for the grounding
electrode.
SAFETY INSTRUCTIONS
Note to CATV system installer:
This reminder is provided to call the CATV system
installer's attention to Article 820-40 of the NEC that
provides guidelines for proper grounding and, in
particular, specifies that the cable ground shall be
connected to the grounding system of the building, as close
to the point of cable entry as practical.
YAMAHA and the Electronic Industries Association’s
Consumer Electronics Group want you to get the most out of
your equipment by playing it at a safe level. One that lets the
sound come through loud and clear without annoying blaring
or distortion – and, most importantly, without affecting your
sensitive hearing. Since hearing damage from
loud sounds is often undetectable until it is too
late, YAMAHA and the Electronic Industries
Association’s Consumer Electronics Group
recommend you to avoid prolonged exposure
from excessive volume levels.
SPECIAL NOTES FOR FCC COMPOSITE DEVICE
This device is a composite system. The digital device
component may not cause harmful interference.
We Want You Listening For A Lifetime
EXAMPLE OF ANTENNA GROUNDING
MAST
GROUND
CLAMP
ANTENNA
LEAD IN
WIRE
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810–20)
GROUNDING CONDUCTORS
(NEC SECTION 810–21)
GROUND CLAMPS
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250. PART H)
ELECTRIC
SERVICE
EQUIPMENT
NEC – NATIONAL ELECTRICAL CODE
1. IMPORTANT NOTICE : DO NOT MODIFY THIS UNIT!
This product, when installed as indicated in the
instructions contained in this manual, meets FCC
requirements. Modifications not expressly approved by
Yamaha may void your authority, granted by the FCC, to
use the product.
2. IMPORTANT : When connecting this product to
accessories and/or another product use only high quality
shielded cables. Cable/s supplied with this product
MUST be used. Follow all installation instructions.
Failure to follow instructions could void your FCC
authorization to use this product in the USA.
3. NOTE : This product has been tested and found to
comply with the requirements listed in FCC Regulations,
Part 15 for Class “B” digital devices. Compliance with
these requirements provides a reasonable level of
assurance that your use of this product in a residential
environment will not result in harmful interference with
other electronic devices.
This equipment generates/uses radio frequencies and, if
not installed and used according to the instructions
found in the users manual, may cause interference
harmful to the operation of other electronic devices.
Compliance with FCC regulations does not guarantee that
interference will not occur in all installations. If this product
is found to be the source of interference, which can be
determined by turning the unit “OFF” and “ON”, please try
to eliminate the problem by using one of the following
measures:
Relocate either this product or the device that is being
affected by the interference.
Utilize power outlets that are on different branch (circuit
breaker or fuse) circuits or install AC line filter/s.
In the case of radio or TV interference, relocate/reorient the
antenna. If the antenna lead-in is 300 ohm ribbon lead,
change the lead-in to coaxial type cable.
If these corrective measures do not produce satisfactory
results, please contact the local retailer authorized to
distribute this type of product. If you can not locate the
appropriate retailer, please contact Yamaha Electronics
Corp., U.S.A. 6660 Orangethorpe Ave, Buena Park, CA
90620.
The above statements apply ONLY to those products
distributed by Yamaha Corporation of America or its
subsidiaries.
FCC INFORMATION
SUPPLIED ACCESSORIES
After unpacking, check that the following parts are contained.
Indoor FM antenna
MW/LW(AM) loop antenna
Remote control transmitter
Batteries (size AA, UM/SUM-3, R6, HP-7)
Speaker cords
12
34
5
6
7
8
9
0
CLEAR
CALL
+
TIME
PROG
REPEAT
CD
BAND
TUNER
HALL
JAZZ CLUB
ROCK CNCT
OFF
POWER
AUX
DAT
VOLUME
TAPE
-
b
a
10
+
E-1
PRECAUTIONS: READ THIS BEFORE OPERATING YOUR UNIT
E-2
To assure the finest performance, please read this manual
carefully. Keep it in a safe place for future reference.
This unit is equipped with the newly developed Active Servo
Processing Speaker System. It is not designed for use with
conventional speakers. Therefore, do not attempt to connect
other speakers than the provided speaker system.
Choose the installation location of this unit carefully. Avoid placing
it in direct sunlight or close to a source of heat. Also avoid
locations subject to vibration and excessive dust, heat, cold or
moisture. Keep it away from sources of hum such as transformers
and electric motors.
Do not operate this unit upside-down. It may overheat, possibly
causing damage.
Never open the cabinet. If something drops into the set, contact
your dealer
Do not place CD or other objects on top of this unit.
Do not use force on switches, controls or connection wires. When
moving the unit, first disconnect the power plug and the wires
connected to other equipment. Never pull the wire itself.
Do not attempt to clean the unit with chemical solvents; this might
damage the finish. Use a clean, dry cloth.
Be sure to read the “TROUBLESHOOTING” section regarding
common operating errors before concluding that the unit is faulty.
To prevent lightning damage, disconnect the AC power plug and
disconnect the antenna cable when there is an electrical storm.
Do not plug the AC power plug to the wall socket before you finish
all connections.
Never allow metallic items (e.g. screwdrivers, tools, etc.) to come
near the cassette deck’s record/playback head assembly in this
unit. Doing so may not only scratch or damage the head’s mirror-
smooth finish, it may change the magnetic characteristics of the
heads, causing a deterioration in reproduction performance
quality.
Although the cassette deck’s record/playback heads used in this
unit are high quality heads with outstanding reproduction
characteristics, they can become dirty through the use of old
tapes or from dust accumulation over time. This can have a
serious effect on reproduction quality. Clean the heads regularly
with one of the commonly available head cleaners or with
cleaning solutions.
The voltage to be used must be the same as that specified on this
unit. Using this product with a higher voltage than that which is
specified is dangerous and may result in a fire or other type of
accident causing damage. YAMAHA will not be held responsible
for any damage resulting from use of this unit with a voltage other
than that which is specified.
Sudden temperature changes and storage or operation in an
extremely humid environment may cause condensation inside the
cabinet.
Condensation can cause the unit to malfunction.
Follow the procedure below to eliminate condensation.
CD pickup
Leave the power on with no disc in the unit until normal
playback is possible (about 1 hour).
Tape head
Leave the power on with no cassette in the unit until normal
playback is possible (about 1 hour).
Note
If condensation forms on the tape head, foreign matter may
accumulate during use.
Remote control
Wipe off condensation on the transmitter window with a soft
cloth before operating the unit.
The sound level at a given volume setting depends on a
combination of speaker efficiency, location and may other factors.
Care should be taken to avoid exposure to sudden high levels of
sound, which may occur when turning on the unit with the volume
control setting at high, and to continuous high levels of sound.
STANDBY mode
While the power is on, pressing the POWER switch (or the
POWER button on the remote control transmitter) switches the
unit to the STANDBY mode. (In this mode, the indicator above the
POWER switch illuminates.) In this mode, main voltage is still
present inside the unit. If you want to switch off the unit
completely, disconnect the AC power plug from the wall socket.
NOTE
Please check the copyright laws in your country to record from
records, compact discs, radio, etc. Recording of copyright material
may infringe copyright laws.
If this unit’s operation freezes or display indications
are incorrect
First disconnect the AC supply lead from the wall AC outlet, and
then press the RESET button on the rear of this unit at least for
one minute. This operation “resets” the internal microcomputer
which controls this unit. However, this operation will also erase all
memorized broadcasting stations. To store stations again, follow
the methods described on page 19–20.
DANGER
Invisible laser radiation when open and interlock failed or
defeated. Avoid direct exposure to beam.
CAUTION 1
Use of controls or adjustments or performance of procedures
other than those specified herein may result in hazardous
radiation exposure.
CAUTION 2
As the laser beam used in this compact disc player is harmful to
the eyes, do not attempt to disassemble the cabinet. Refer
servicing to qualified personnel only.
WARNING
To reduce the risk of fire or electric shock, do not expose this unit to
rain or moisture.
To avoid electrical shock, do not open the cabinet. Refer
servicing to qualified personnel only.
Laser Diode Properties
Material: GaAlAs
Wavelength: 780nm
Emission Duration: continuous
Laser Output: max. 44.6µW*
* This output is the value measured at a distance of about 200mm
from the objective lens surface on the Optical Pick-up Block.
ACTIVE SERVO TECHNOLOGY
E-3
The theory of the Active Servo Technology is based upon two
major factors, the Helmholtz resonator and negative-
impedance drive. Active Servo Processing speakers
reproduce the bass frequencies through an “air woofer”,
which is a small port or opening in the speaker’s cabinet.
This opening is used instead of, and performs the functions
of, a woofer in a conventionally designed speaker system.
Thus, signals of low amplitude within the cabinet can,
according to the Helmholtz resonance theory, be output from
this opening as waves of great amplitude if the design is such
that the size of the opening and the volume of the cabinet are
in the correct proportion to satisfy a certain ratio.
In order to accomplish this, moreover, the amplitudes within
the cabinet must be both precise and of sufficient power
because these amplitudes must overcome the “load”
presented by the air that exists within the cabinet.
Thus it is this problem that is resolved through the
employment of a design in which the amplifier functions to
supply the signals. If the electrical resistance of the voice coil
is reduced to zero, the movement of the speaker unit would
become linear with respect to signal voltage, and, to
accomplish this, a special negative-impedance output-drive
amplifier for subtracting output impedance of the amplifier is
used.
By employing negative-impedance drive circuits, the amplifier
is able to generate precise, low-amplitude low-frequency
waves with superior damping characteristics, and these
waves are then radiated from the cabinet opening as high-
amplitude signals. The system can, therefore, by employing
the negative-impedance output drive amplifier and a speaker
cabinet with the Helmholtz resonator, reproduce an extremely
wide range of frequencies (28 Hz – 20 kHz) with amazing
sound quality and less distortion.
The features described above, then, are combined to be the
fundamental structure of the Active Servo Technology.
High-
amplitude
bass
sound
Air woofer
(Helmholtz resonator)
Active Servo
Processing
Amplifier
Signals
Signals of low amplified
Negative-impedance
output drive
Cabinet
Port
A
B
1
23
11
12
13
14
15
16
17
18
19
20
4
5
6
7
8
9
10
OVER
RANDOM
REPEAT
TIME
OVER
AUTO
EDIT
PROGRAM
TOTAL REMAIN
NAMES OF CONTROLS, INDICATORS AND REAR PANEL PARTS
E-4
CD Player Section
1. AUTO EDIT Indicator
2. TIME OVER Indicator
3. Track Number Indicator
4. PROGRAM Indicator
5. TOTAL Time Indicator
6. REMAINING Time Indicator
7. Minutes and Seconds Indicator
8. Pause Indicator:
9. Play Indicator:
10. Tape Side Indicators
11. Music Schedule Indicator
12. Music Schedule OVER Indicator
13. RANDOM Play Indicator
14. REPEAT Indicator
15. RANDOM Play Button
16. Stop Button:
17. Play Button:
18. Disc Table
19. Open/Close Button:
20. EDIT Button
21. Skip Buttons: /
22. Auto Tape Edit Buttons
Tuner/Timer Section
23. Preset Number Indicator
24. Band Indicator
25. Station Frequency Indicator
26. MEMORY Indicator
27. AUTO ST Indicator
28. FM STEREO Indicator
29. TIMER Set Indicator
30. ON TIME Indicator
31. SLEEP Indicator
32. AUTO MEMORY Button
33. BAND Selector Button
34. TUNER PRESET Buttons: /
35. DISPLAY Button
36. TIMER Button
37. SLEEP Button
38. MEMORY/TIME ADJUST Button
39. FM MODE/CLEAR Button
40. TUNING Down/HOUR Button:
41. TUNING Up/MINUTE Button:
STEREO
ON TIME
SLEEP
MHz
kHz
MEMORY
AUTO ST
TIMER
12
3
4
5
6 7
89
10 11 12 13 14
15 16
17
18 19 20 21 22
23
24
25
26 27 28 29 30 31
32 33
34
35 36 37 38 39 40 41
E-5
NAMES OF CONTROLS, INDICATORS AND REAR PANEL PARTS
Amplifier Section
42. POWER Switch
43. STANDBY Indicator
44. BASS Tone Control
45. TREBLE Tone Control
46. BALANCE Control
47. INPUT Selector and Indicators
48. VOLUME Control/Indicator
49. PHONES Jack
50. SOUND PROCESSOR Program Selector and
Indicators
51. Remote Control Sensor
Tape Deck Section
Controls for Tape “a”
52. Tape “a” Cassette Compartment
53. EJECT Button
54. Fast Wind Button:
55. Play Button and Indicator:
56. Stop Button:
57. Play Button and Indicator:
58. Fast Wind Button:
Controls for Tape “b”
59. Fast Wind Button:
60. Play Button and Indicator:
61. Stop Button:
62. Play Button and Indicator:
63. Fast Wind Button:
64. EJECT Button
65. Tape “b” Cassette Compartment
Common Controls for Tape “a” and “b”
66. REVERSE MODE Switch
67. DOLBY NR Switch
68. DUBBING Buttons and Indicators
69. PAUSE Button
70. REC Button
71. Record Indicator
72. TIMER Switch
42 43 44 45
46
47
48
49 50 51
66 67 68 69 70 71 72
52 53
54 55
56 57
58
59
606162 63 64 65
Rear Panel of Tuner/CD Player Section
1. System Control Connector
2. Antenna Terminals
3. RESET Button
4. FREQUENCY STEP Switch (General model only)
E-6
NAMES OF CONTROLS, INDICATORS AND REAR PANEL PARTS
FREQUENCY STEP switch (General model only)
Because the interstation frequency spacing differs in
different areas, set the FREQUENCY STEP switch
(located at the rear) according to the frequency spacing in
your area. Before setting this switch, disconnect the AC
supply lead of this unit from the AC outlet.
Rear Panel of Amplifier Section
5. System Control Sockets
6. SPEAKERS Terminals
7. DAT Terminals
8. PHONO Terminals and GND Terminal
9. AUX Terminals
10. VOLTAGE SELECTOR (General model only)
11. AC Supply Lead
VOLTAGE SELECTOR (General model only)
The voltage selector on the rear panel of this unit must
be set for your local main voltage BEFORE plugging
into the AC main supply.
Voltages are 110/120/220/240V AC, 50/60 Hz.
Rear Panel of Tape Deck Section
12. System Control Connector
13. System Control Socket
Speaker Section
14. AST Port
15. Speaker Terminals
(U.S.A., Canada and General models)
(U.K., Australia and Europe models)
Names of controls
CD Control Buttons
1. Remote Control Transmitter Window
2. Track Number Input Buttons
3. PROGRAM Button
4. CLEAR Button
5. CALL Button
6. Search Buttons: /
7. REPEAT Button
8. Stop Button:
9. TIME Display Selector Button
10. Open/Close Button:
11. Skip Buttons: /
12. CD Call Button
13. Play Button:
14. Pause Button:
Tuner Control Buttons
15. Tuning Up/Down Buttons
16. BAND Selector Button
17. TUNER Call Button
REMOTE CONTROL TRANSMITTER
E-7
12
34
5
6
7
8
9
0
CLEAR
CALL
+
TIME
PROG
REPEAT
CD
BAND
TUNER
HALL
JAZZ CLUB
ROCK CNCT
OFF
POWER
AUX
DAT
VOLUME
TAPE
-
b
a
10
+
BAND
TUNER
HALL
JAZZ CLUB
ROCK CNCT
OFF
POWER
AUX
DAT
VOLUME
TAPE
-
b
a
+
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15 16 17
Tape Control Buttons
18. Record/Pause Button:
19. Fast Wind Button:
20. Play Button:
21. Stop Button:
22. Play Button:
23. Fast Wind Button:
24. Fast Wind Button:
25. Play Button:
26. Stop Button:
27. Play Button:
28. Fast Wind Button:
29. TAPE Call Button
30. POWER Switch
31. AUX Call Button
32. DAT Call Button (or PHONO Call Button for U.K.,
Australia and Europe models)
33. Sound Processor Program Selectors
34. Sound Processor OFF Button
35. VOLUME Down ()/Up (+) Buttons
REMOTE CONTROL TRANSMITTER
E-8
Tape “b”Tape “a”
BAND
TUNER
HALL
JAZZ CLUB
ROCK CNCT
OFF
TAPE
b
a
REPEAT
CD
BAND
TUNER
HALL
JAZZ CLUB
ROCK CNCT
OFF
POWER
AUX
DAT
VOLUME
TAPE
-
b
a
+
18
24
19
20 21 22 23
25 26 27
28
29
30
31
32
33
34
35
E-9
Loading the batteries for the re-
mote control transmitter
1Remove the battery compartment cover.
2Insert 2 “AA” size batteries (UM/SUM-3, R6, HP-7 or
equivalent) into the battery compartment.
*Placing the batteries the wrong way round will cause
malfunction.
3Replace the battery compartment cover.
Precautions for battery use
Insert the batteries according to the direction indicated in
the battery compartment.
Replace all batteries with new ones at the same time.
Remove the batteries if they are weak or if the unit is not
in use for long periods.
Don’t mix normal batteries with rechargeable batteries.
Proper use of the remote control
transmitter
Aim (within the range of 30°with no obstacles) the remote
control transmitter at the remote control sensor and operate
as shown.
Notes concerning use
Replace the batteries if control distance decreases or
operation becomes unstable.
Periodically clean the transmitter window on the remote
control transmitter and the sensor on the main unit with a
soft cloth.
Exposing the sensor on the main unit to strong light
(especially an inverter type of fluorescent lamp etc.) may
interfere with operation. Change the lighting or the
direction of the unit.
Keep the remote control transmitter away from moisture,
excessive heat, shock and vibrations.
The remote control transmitter’s usable range is within
0.2m (8”) and 6m (20’) away from the sensor.
REMOTE CONTROL TRANSMITTER
E-10
Placing the system
Place this system in either the way of A or B figured at left.
A:
Be sure to place the Tuner/CD player on the top, the Deck
at the bottom and the Amplifier between them.
B: Be sure to place the Tuner/CD player on the Deck, and
the Amplifier at the left of them.
Notes
If the system is put in a rack, allow a space of a least 3 cm
(1-3/16”) above and 10 cm (4”) at the back of the unit.
Disconnect the AC supply lead from the AC outlet before
connecting or disconnecting any component.
Be careful not to let the connection cords touch the
radiator plates on the rear of the amplifier.
Antenna connection
(1) Supplied FM antenna
Connect the FM antenna wire to the corresponding terminal
and direct the FM antenna wire to the direction where the
strongest signal can be received.
(2) Supplied MW/LW (AM) loop antenna
Connect the MW/LW (AM) loop antenna wire to the
corresponding terminals. Position the MW/LW (AM) loop
antenna for optimum reception. Place the MW/LW (AM) loop
antenna on a shelf etc., or install it on the rack or wall with
screws (not supplied).
Notes
When static is still heard even after adjusting the position
of the MW/LW (AM) loop antenna, try reversing the
connection (right to left).
Do not place the MW/LW (AM) loop antenna on the unit. It
will result in noise generation, since the unit is equipped
with digital electronics. Place the MW/LW (AM) loop
antenna away from the unit.
(3) External FM antenna
Use an external FM antenna instead of an indoor FM
antenna if you need better reception. Consult your dealer.
(4) External MW/LW (AM) antenna
Use an external MW/LW (AM) antenna if you need better
reception. Consult your dealer.
Note
When using an external MW/LW (AM) antenna, be sure to
keep the wire of the MW/LW (AM) loop antenna connected.
PREPARATION FOR USE
Deck
Amplifier
Tuner/CD player
Left speaker
Right speaker
Left speaker
Tuner/CD player
Amplifier
Deck
Right speaker
B
A
15 m (49 feet)
7.5 m (25 feet)
Earth rod
or
Speaker connection
Connect each speaker wire to the SPEAKERS terminals as
shown. (Black wire with white line plus (+) terminal, black
wire minus (–) terminal)
Cautions
Do not let the bare speaker wires touch each other as this
could damage the amplifier and/or speakers.
When connecting the speakers to the unit, be sure to
connect the speaker wires properly. Do not mistake the
right channel for the left channel and the plus (+) terminal
for the minus (–) terminal.
Do not connect these SPEAKERS terminals to speakers
other than the provided speaker system.
System connection
Connect the red connector to the red socket.
Connect the white connector to the white socket.
Connect the black connector to the black socket.
How to disconnect the system connector
Grasp both sides of the connector to disconnect the
connector.
Connecting the AC supply lead
After connecting the speakers and system connectors,
plug the AC supply lead into a convenient AC outlet.
Unplug the AC supply lead from the AC outlet if the unit is
not to be used for a long period of time.
PREPARATION FOR USE
E-11
Altavoz
derecho
Altavoz
izquierdo
To an
AC outlet
1 While the station frequency indicator on the tuner or the
“ON TIME” indicator is lit, press the DISPLAY button to
display the time.
2 While pressing the TIME ADJUST button, press the
HOUR button and set the hour.
* Press the HOUR button once to advance the time by 1
hour. Press and hold to advance continuously.
3 While pressing the TIME ADJUST button, press the
MINUTE button and set the desired time.
* Press the MINUTE button once to advance the time by
1 minute. Press and hold to advance continuously.
* The hour setting will not advance even if minutes
advance from “59” to “00”.
4 Release the TIME ADJUST button to start the clock at the
correct time.
* The clock starts operating from “0” seconds. (Seconds
are not displayed.)
In the event of a power failure or when the AC supply
lead is disconnected.
The clock display will go out.
When the AC power supply is resumed, the clock display will
flash on and off to indicate that the time must be reset.
Care of compact discs
Compact discs are fairly resistant to damage, however
mistracking can occur due to an accumulation of dirt on the
disc surface.
Follow the guidelines below for maximum enjoyment from
your CD collection and player.
Do not write on either side of the disc, particularly the non-
label side. Signals are read from the non-label side. Do
not mark this surface.
Keep your discs away from direct sunlight, heat and
excessive moisture.
Always hold the CDs by the edges. Fingerprints, dirt or
water on the CDs can cause noise or mistracking. If a CD
is dirty or does not play properly, clean it with a soft, dry
cloth, wiping straight out from the centre, along the radius.
DISPLAY
TUNING
HOUR
MINUTE
MEMORY
TIME ADJ
FM MODE
CLEAR
TUNING
HOUR
MINUTE
MEMORY
TIME ADJ
FM MODE
CLEAR
TUNING
HOUR
MINUTE
MEMORY
TIME ADJ
FM MODE
CLEAR
E-12
COMPACT DISC OPERATION
SETTING THE CLOCK
Europe model uses an “00:00” 24-hour display.
Changes.
Changes.
1
2
3
4
CD playback
1 Select the CD position.
2 Press the open/close button to open the disc table.
3 Place a disc on the table, label side up.
* 8 cm (3”) discs may be played without an adaptor.
4 Press the open/close button to close the disc table.
* The total number of tracks and the total playing time
will be displayed for several seconds.
* The music schedule will be displayed only for the
number of tracks on the disc.
* If the compact disc contains more than 21 tracks, the
“OVER” indicator will light up on the music schedule.
5 Press the play button to start playback from track 1.
* The “ ” indicator will appear and playback will begin.
As the playback of each track on the music schedule is
finished, that track number will go out.
Direct playback
If a compact disc is already in the disc table, just press the
play button to automatically turn on the power and start
playback.
To interrupt playback
11 Press the pause button.
* The “ ” indicator will light up.
22 Press the play button to resume playback from the same
point.
To stop playback
Press the stop “ ” button.
To switch the unit off after use
Set the unit to the STANDBY mode by pressing POWER
switch. (The indicators will go off except for the STANDBY
indicator and the current time display.)
COMPACT DISC OPERATION
E-13
REMAIN
1
23
11
12
4
5
6
7
8
9
10
1
23
11
12
4
5
6
7
8
9
10
TOTAL
2,4
5
POWER
1
11
2,4
1
5,22
POWER
Total number
of tracks
Total playing time
Remaining playing
time for first track
Music schedule
12
34
5
6
7
8
9
0
CLEAR
CALL
+
TIME
PROG
REPEAT
CD
BAND
TUNER
HALL
JAZZ CLUB
ROCK CNCT
OFF
POWER
AUX
DAT
VOLUME
TAPE
-
b
a
10
+
12
34
5
6
7
8
9
0
+
10
COMPACT DISC OPERATION
E-14
Precautions
If the disc is damaged, dirty or loaded upside down, the
display will show error signs as follows:
* “no disc” is displayed.
* The total track number or “01” is not displayed.
Clean, replace or load the disc properly.
If TV or radio interference occurs during CD operation,
move the unit away from the TV or radio.
Subjecting the unit to shock or vibration can cause
mistracking.
Playing some compact discs at high volume can cause
mistracking. In this case, listen at lower volume.
Do not push the disc table while it is moving.
Press the open/close button if your finger, a disc or other
object is caught by the table. (The table closing operation
will stop after 4 seconds even if the open/close button is
not pressed. At this time, “Er 0:00” appears in the display.)
If the power fails while the table is open, wait until the
power supply returns or gently push the table manually to
close it.
The temperature range for playing compact discs is
recommended to be 5°C (41°F) – 35°C (95°F).
Direct-selection play
By using the track number input buttons on the remote
control transmitter, any track you wish to listen to can be
played directly.
Use the track number input buttons to select the desired
track number. Play will begin automatically.
A. For example, to choose selection 12
(1)Press the “+10” button.
(2)Within 3 seconds, press “2” button.
B. For example, to choose selection 20
(1)Press the “+10” button.
(2)Within 3 seconds, press the “+10” button again.
(3)Within 3 seconds, press the “0” button.
Note
A track number higher than the number of tracks on the disc
cannot be selected. Also, if a higher track number is selected
while the disc table is open, play will begin from track 1 when
the disc table is closed.
E-15
Skip search
The beginning of any track can be found automatically.
1 Load a disc and begin playback.
2 Press the button to forward or button to reverse
through the CD.
* The “ ” indicator flashes while searching for the track
beginning.
* If the button or button is pressed repeatedly
during playback, playback will begin from the beginning
of the track shown in the track number indicator.
* This function can also be performed while the unit is
stopped. Press the play button when your desired track
number appears in the track number display. Playback
will begin from the beginning of the track.
Note
This function will be performed forward or backward from any
point on the disc. However, it will not move forward during
playback of the final track.
COMPACT DISC OPERATION
Manual search
1 Begin playback.
2 Press and hold the button to advance play rapidly,
and the button to reverse play rapidly.
*
The sound can be heard (although slightly garbled)
during manual search in either direction. This is
convenient for locating a precise position within a track,
or for reviewing the contents quickly.
* Manual search proceeds at twice the normal playback
speed for several seconds, and then the speed will
become faster.
Notes
Manual search can also be performed while disc play is
paused.
Manual search is not possible during random play.
If the end of the disc is reached while searching, the “End”
indicator lights and CD operation is paused. Press the
stop button to stop CD operation.
2
1
2
12
34
5
6
7
8
9
0
CLEAR
CALL
+
TIME
PROG
REPEAT
CD
BAND
TUNER
HALL
JAZZ CLUB
ROCK CNCT
OFF
POWER
AUX
DAT
VOLUME
TAPE
-
b
a
10
+
12
34
5
6
7
8
9
0
CLEAR
CALL
+
TIME
PROG
REPEAT
CD
BAND
TUNER
HALL
JAZZ CLUB
ROCK CNCT
OFF
POWER
AUX
DAT
VOLUME
TAPE
-
b
a
10
+
E-16
Program play
You can program up to 20 tracks in any desired order.
1 Load a disc and close the disc table.
2 When in the stop mode, press the PROGRAM button to
prepare for programming.
* The “PROGRAM” indicator will flash.
3 Use the track number input buttons to select the desired
track number.
* The selected track number will be displayed.
* The programmed playback order and the total play
time of the programmed tracks will be automatically
displayed, and only those track numbers will appear in
the music schedule.
* For example, to choose selection 12
(1)Press the “+10” button.
(2)Within 3 seconds, press the “2” button.
4 Repeat step 3 for any other track. Up to 20 tracks can be
programmed.
5 Press the play button to start playback of programmed
selections.
Notes
It is also possible to program a sequence of tracks while
looking at the list of tracks on the surface of the disc
before closing the disc table.
During playback or pause, programming is not possible.
To check the program data
Press the CALL button while the disc is stopped to review the
order of the programmed sequence before playback begins.
* While the playback order and track numbers are
displayed, the track numbers on the music schedule will
also flash on and off in the same order.
Press the CALL button during playback or pause to check the
number of the next track to be played.
To cancel the programmed sequence
Press the CLEAR button while the disc is stopped and the
“PROGRAM” indicator is lit.
* To cancel the last programmed track during programming,
press the CLEAR button when the “PROGRAM” indicator
is flashing.
Notes
Opening the disc table automatically cancels the
programmed sequence.
Programming and cancelling are not possible during
playback or pause.
COMPACT DISC OPERATION
1
23
12
10
PROGRAM
TOTAL
1
23
12
10
PROGRAM
TOTAL
2
3
5
Playback order Total playing time
Music schedule
CALL
CLEAR
Playback order Track number
Music schedule
E-17
Repeat play
An entire disc, a single track or a programmed sequence can
be continuously repeated.
To repeat an entire disc
1 Press the REPEAT button.
* The “REPEAT” indicator will light up.
2 Press the play button.
To repeat a programmed sequence
11 Program a sequence of up to 20 tracks.
(Refer to the “Program play” on the previous page for the
programming method.)
22 Press the REPEAT button.
* The “REPEAT” indicator will light up.
33 Press the play button.
To repeat a single track
11 Program a single track.
(Refer to the “Program play” on the previous page for the
programming method.)
22 Press the REPEAT button.
* The “REPEAT” indicator will light up.
33 Press the play button.
To cancel the repeat play
Press the REPEAT button again.
(The “REPEAT” indicator goes out.)
COMPACT DISC OPERATION
1
23
11
12
4
5
6
7
8
9
10
REPEAT
1,22
2,33
12
34
5
6
7
8
9
0
CLEAR
CALL
+
TIME
PROG
REPEAT
CD
BAND
TUNER
HALL
JAZZ CLUB
ROCK CNCT
OFF
POWER
AUX
DAT
VOLUME
TAPE
-
b
a
10
+
E-18
Random play
The tracks on the disc can be played in a random order.
1 Load a disc and close the disc table.
2 Press the RANDOM button to begin random play.
* The “RANDOM” indicator will light up.
* As the tracks to be played are selected, the track
numbers “[1]”, “[2]”, “[3]” ... “[20]” in the music schedule
will flash on and off and the track number display will
change accordingly.
To cancel the random play
Press the play button. The “RANDOM” indicator goes out.
Notes
When using random play or repeat play, be sure to press
the stop button, or switch off the power when you have
finished listening. Otherwise, the CD(s) will be played
endlessly.
While programmed tracks are being played, random play
is not possible.
Switching the time display
Each time the TIME button is pressed, the display will
change as described below.
[Example]
When the second track is being played back. (Refer to the
illustration on the left.)
The elapsed play time for each track will be displayed.
* 8 seconds have passed since the beginning of the
second track.
The remaining play time for the current track will be
displayed.
* 2 minutes and 58 seconds remain till the end of the
second track.
The total play time up to the current track will be
displayed.
* 8 minutes and 16 seconds have passed since the
beginning of the first track.
The total remaining play time from the point being played
at that time will be displayed.
* 41 minutes remain till the end of the disc.
Notes
During random play, the elapsed play time for each track
will be displayed, and the display cannot be switched.
When a disc that has 21 or more tracks is used, “--:--” will
be displayed in the following cases:
* When an attempt is made to display a track number 21
or higher by using the button when the disc is
stopped.
* When an attempt is made to display the remaining time
while a track whose number is 21 or higher is being
played back.
* When you program a track number 21 or higher .
* When the total play time exceeds 100 minutes.
COMPACT DISC OPERATION
3
RANDOM
23
11
12
4
5
6
7
8
9
10
23
11
12
4
5
6
7
8
9
10
23
11
12
4
5
6
7
8
9
10
23
11
12
4
5
6
7
8
9
10
TOTAL REMAIN
REMAIN
TOTAL
1
2
TIME
1 / 1

Yamaha CC-5 Användarmanual

Kategori
Soundbar-högtalare
Typ
Användarmanual
Denna manual är också lämplig för