Sharp LC-13B2E Bruksanvisning

LCD COLOUR TELEVISION

LCD-FARBFERNSEHGERÄT

TÉLÉVISION COULEUR À ÉCRAN

À CRISTAUX LIQUIDES (LCD)

TELEVISORE A COLORI LCD

TELEVISIÓN EN COLOR LCD

LCD-FÄRG-TV

LCD-KLEURENTELEVISIE

LC-13B2E

OPERATION MANUAL

BEDIENUNGSANLEITUNG

MODE D’EMPLOI

MANUALE DI ISTRUZIONI

MANUAL DE MANEJO

BRUKSANVISNING

GEBRUIKSAANWIJZING

ENGLISH

DEUTSCH

FRANÇAIS

ITALIANO

ESPAÑOL

SVENSKA

NEDERLANDS

MEN

U

This equipment complies with the requirements of Directive 89/336/EEC and 73/23/EEC as amended

by 93/68/EEC.

Dieses Gerät entspricht den Anforderungen der EG-Richtlinien 89/336/EWG und 73/23/EWG mit

Änderung 93/68/EWG.

Ce matériel répond aux exigences contenues dans les directives 89/336/CEE et 73/23/CEE modifiées

par la directive 93/68/CEE.

Dit apparaat voldoet aan de eisen van de richtlijnen 89/336/EEG en 73/23/EEG, gewijzigd door 93/68/

EEG.

Dette udstyr overholder kravene i direktiv nr. 89/336/EEC og 73/23/EEC med tillæg nr. 93/68/EEC.

Quest’apparecchio è conforme ai requisiti delle direttive 89/336/EEC e 73/23/EEC come emendata

dalla direttiva 93/68/EEC.

Η εγκατάσταση αυτή ανταπκρίνεται στις απαιτήσεις των δηγιών της Ευρωπαϊκής Ενωσης

89/336/ΕΚ και 73/23/ΕΚ, #πως ι καννισµί αυτί συµπληρώθηκαν απ# την δηγία 93/68/

ΕΚ.

Este equipamento obedece às exigências das directivas 89/336/CEE e 73/23/CEE, na sua versão

corrigida pela directiva 93/68/CEE.

Este aparato satisface las exigencias de las Directivas 89/336/CEE y 73/23/CEE, modificadas por

medio de la 93/68/CEE.

Denna utrustning uppfyller kraven enligt riktlinjerna 89/336/EEC och 73/23/EEC så som kompletteras

av 93/68/EEC.

Dette produktet oppfyller betingelsene i direktivene 89/336/EEC og 73/23/EEC i endringen 93/68/

EEC.

Tämä laite täyttää direktiivien 89/336/EEC ja 73/23/EEC vaatimukset, joita on muutettu direktiivillä 93/

68/EEC.

SPECIAL NOTE FOR USERS IN THE U.K.

The mains lead of this product is fitted with a non-rewireable (moulded) plug incorporating a 3A fuse.

Should the fuse need to be replaced, a BSI or ASTA approved BS 1362 fuse marked

or

ASA

and of

the same rating as above, which is also indicated on the pin face of the plug, must be used.

Always refit the fuse cover after replacing the fuse. Never use the plug without the fuse cover fitted.

In the unlikely event of the socket outlet in your home not being compatible with the plug supplied, cut

off the mains plug and fit an appropriate type.

DANGER: The fuse from the cut-off plug should be removed and the cut-off plug destroyed immedi-

ately and disposed of in a safe manner.

Under no circumstances should the cut-off plug be inserted elsewhere into a 13A socket

outlet, as a serious electric shock may occur.

To fit an appropriate plug to the mains lead, follow the instructions below:

IMPORTANT: The wires in the mains lead are coloured in accordance with the following code:

Blue : Neutral Brown : Live

As the colours of the wires in the mains lead of this product may not correspond with the coloured

markings identifying the terminals in your plug, proceed as follows;

• The wire which is coloured blue must be connected to the plug terminal which is marked N

or coloured black.

• The wire which is coloured brown must be connected to the plug terminal which is marked

L or coloured red.

Ensure that neither the brown nor the blue wire is connected to the earth terminal in your three-pin plug.

Before replacing the plug cover make sure that:

• If the new fitted plug contains a fuse, its value is the same as that removed from the cut-off

plug.

• The cord grip is clamped over the sheath of the mains lead, and not simply over the lead

wires.

IF YOU HAVE ANY DOUBT, CONSULT A QUALIFIED ELECTRICIAN.

LCD COLOUR TELEVISION

OPERATION MANUAL

ENGLISH

Contents

Page Page

Dear SHARP Customer.......................................... 2

Important Safety Precautions ................................. 2

Supplied Accessories ............................................. 4

Preparation ............................................................. 5

Installing Batteries in the Remote Control ...... 5

Using Remote Control ..................................... 5

Power Connection ........................................... 6

Antenna Connection ........................................ 6

First Installation................................................ 7

Part Names of Main Unit ........................................ 9

Part Names of Remote Control ............................ 11

Basic Operation .................................................... 12

Turning On and Off the Main Power ............. 12

Switching the TV/VIDEO (AV1/AV2/AVS/TV)

Mode ........................................................... 12

Sound Volume ............................................... 13

ON/OFF Standby ........................................... 13

Changing Channels ....................................... 14

Useful Features .................................................... 15

Adjusting Picture Settings ............................. 15

Adjusting Sound Settings .............................. 16

Using Programme Table................................ 17

Selecting Menu Items .................................... 18

Standard Settings .......................................... 20

Programmes .................................................. 21

AV Connections ............................................. 28

Child Lock ...................................................... 31

On-screen Display ......................................... 36

Timer Functions ............................................. 37

Setting Time and Date (Manual) ................... 38

NICAM Broadcast Selection .......................... 39

IGR (German stereo system) Broadcasts..... 40

Teletext ................................................................. 41

Connecting External Devices ............................... 46

Examples of external devices that can be

connected ................................................... 46

21-pin Euro-SCART (RGB) ........................... 47

How to fix the cables ..................................... 49

Troubleshooting .................................................... 50

Specifications........................................................ 52

Dimensional Drawings.......................................... 53

LC-13B2E

2

Dear SHARP Customer

Thank you for your purchase of the SHARP LCD Colour TV product. To ensure safety and many

years of trouble-free operation of your product, please read the Important Safety Precautions

carefully before using this product.

Important Safety Precautions

Electricity is used to perform many useful functions, but it can also cause personal injuries and property

damage if improperly handled. This product has been engineered and manufactured with the highest priority

on safety. However, improper use can result in electric shock and/or fire. In order to prevent potential danger,

please observe the following instructions when installing, operating and cleaning the product. To ensure your

safety and prolong the service life of your LCD colour TV product, please read the following precautions

carefully before using the product.

■ Read instructions—All operating instructions must be read and understood before the product is operated.

■ Keep this manual in a safe place—These safety and operating instructions must be kept in a safe place for

future reference.

■ Observe warnings—All warnings on the product and in the instructions must be observed closely.

■ Follow instructions—All operating instructions must be followed.

■ Attachments—Do not use attachments not recommended by the manufacturer. Use of inadequate attach-

ments can result in accidents.

■ Power source—This product must operate on a power source specified on the specification label. If you

are not sure of the type of power supply used in your home, consult your dealer or local power company.

For units designed to operate on batteries or another power source, refer to the operating instructions.

■ Power cord protection—The power cords must be routed properly to prevent people from stepping on them

or objects from resting on them. Check the cords at the plugs and product.

■ If you plan to use a DC power supply unit other than the AC adapter supplied with the product, make sure

the power supply unit provides stable voltage with minimum fluctuations. Unstable power supply can cause

problems in the product.

■ Overloading—Do not overload AC outlets or extension cords. Overloading can cause fire or electric shock.

■ Entering of objects and liquids—Never insert an object into the product through vents or openings. High

voltage flows in the product, and inserting an object can cause electric shock and/or short internal parts.

For the same reason, do not spill water or liquid on the product.

■ Servicing—Do not attempt to service the product yourself. Removing covers can expose you to high

voltage and other dangerous conditions. Request a qualified service person to perform servicing.

■ Repair—If any of the following conditions occurs, unplug the power cord from the AC outlet, and request a

qualified service person to perform repairs:

a. When the power cord or plug is damaged.

b. When a liquid was spilled on the product or when objects have fallen into the product.

c. When the product has been exposed to rain or water.

d. When the product does not operate properly as described in the operating instructions.

Do not touch the controls other than those described in the operating instructions. Improper adjustment

of controls not described in the instructions can cause damage, which often requires extensive adjust-

ment work by a qualified technician.

e. When the product has been dropped or damaged.

f. When the product displays an abnormal condition. Any noticeable abnormality in the product indicates

that the product needs servicing.

■ Replacement parts—In case the product needs replacement parts, make sure that the service person uses

replacement parts specified by the manufacturer, or those with the same characteristics and performance

as the original parts. Use of unauthorized parts can result in fire, electric shock and/or other danger.

■ Safety checks—Upon completion of service or repair work, request the service technician to perform safety

checks to ensure that the product is in proper operating condition.

■ Wall or ceiling mounting—When mounting the product on a wall or ceiling, be sure to install the product

according to the method recommended by the manufacturer.

3

Important Safety Precautions (Continued)

■ Cleaning—Unplug the power cord from the AC outlet before

cleaning the product. Use a damp cloth to clean the product. Do

not use liquid cleaners or aerosol cleaners.

■ Water and moisture—Do not use the product near water, such

as bathtub, washbasin, kitchen sink and laundry tub, swimming

pool and in a wet basement.

■ Stand—Do not place the product on an unstable cart, stand,

tripod or table. Placing the product on an unstable base can

cause the product to fall, resulting in serious personal injuries as

well as damage to the product. Use only a cart, stand, tripod,

bracket or table recommended by the manufacturer or sold with

the product. When mounting the product on a wall, be sure to

follow the manufacturer’s instructions. Use only the mounting

hardware recommended by the manufacturer.

■ When relocating the product placed on a cart, it must be moved

with utmost care. Sudden stops, excessive force and uneven

floor surface can cause the product to fall from the cart.

■ Ventilation—The vents and other openings in the cabinet are

designed for ventilation. Do not cover or block these vents and

openings since insufficient ventilation can cause overheating

and/or shorten the life of the product. Do not place the product

on a bed, sofa, rug or other similar surface, since they can block

ventilation openings. This product is not designed for built-in

installation; do not place the product in an enclosed place such

as a bookcase or rack, unless proper ventilation is provided or

the manufacturer’s instructions are followed.

■ The LCD panel used in this product is made of glass. Therefore,

it can break when the product is dropped or applied with impact.

Be careful not to be injured by broken glass pieces in case the

LCD panel breaks.

■ Heat sources—Keep the product away from heat sources such

as radiators, heaters, stoves and other heat-generating products

(including amplifiers).

The LCD panel is a very high technology product with 921,600 thin film transistors, giving you fine

picture details.

Occasionally, a few non-active pixels may appear on the screen as a fixed point of blue, green or red.

Please note that this does not affect the performance of your product.

4

LCD COLOUR TELEVISION

LCD-FARBFERNSEHGERÄT

TÉLÉVISION COULEUR À ÉCRAN

À CRISTAUX LIQUIDES (LCD)

TELEVISORE A COLORI LCD

TELEVISIÓN EN COLOR LCD

LCD-FÄRG-TV

LCD-KLEURENTELEVISIE

LC-13B2E

OPERATION MANUAL

BEDIENUNGSANLEITUNG

MODE D’EMPLOI

MANUALE DI ISTRUZIONI

MANUAL DE MANEJO

BRUKSANVISNING

GEBRUIKSAANWIJZING

ENGLISHDEUTSCHFRANÇAISITALIANOESPAÑOLSVENSKA

NEDERLANDS

M

E

N

U

Make sure the following accessories are provided with the product.

Supplied Accessories

Operation manual (×1) Wireless remote control (×1)

AC cord (×1)

R-03 dry battery (×2)

AC adapter (×1)

Cable clamp (×2)

* Product shape varies in some countries.

5

Installing Batteries in the Remote Control

Before using the LCD TV set for the first time, install the two R-03 batteries supplied in the remote control.

When the batteries become depleted and the remote control fails to operate, replace the batteries with new

R-03 batteries.

1 Open the battery cover. 2 Insert two R-03 batteries. 3 Replace the battery cover.

■ Position the positive and

negative ends of the

batteries as indicated in

the compartment.

Caution!

Precautions regarding batteries

■ Improper use of batteries can result in a leakage of chemicals and/or explosion. Be sure to follow the

instructions below.

• Place batteries with their terminals corresponding to the (+) and (–) indications.

• Different types of batteries have different characteristics. Do not mix batteries of different types.

• Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new batteries and/

or cause old batteries to leak chemicals.

• Remove batteries as soon as they are depleted. Chemicals that leak from batteries can cause a rash. If

chemical leakage is found, wipe it off with a cloth.

• The batteries supplied with the product may have a shorter life expectancy due to storage conditions.

• If the remote control is not to be used for an extended period of time, remove the batteries from the

remote control.

Preparation

■ Engaging the lower

claw with the remote

control, close the

cover.

Using Remote Control

■ Use the remote control by pointing it towards the remote sensor

window of the main unit. Objects between the remote control and

sensor window may prevent proper operation.

Cautions regarding use of remote control

■ Do not expose the remote control to shock. In addition, do not

expose the remote control to liquids, and do not place it in an area

with high humidity.

■ Do not install or place the remote control under direct sunlight. The

heat may cause deformation of the unit.

■ The remote control may not work properly if the remote sensor

window is under direct sunlight or strong lighting. In such a case,

change the angle of the lighting or main unit, or operate the remote

control closer to the remote sensor window.

■ Raise the cover while

pressing the ([) part.

Remote sensor

window

Power/Standby

indicator

6

Power Connection

Notes:

■ Always turn the MAIN POWER switch of the LCD TV set to OFF when connecting the AC adapter.

■ Unplug the AC adapter from the LCD TV set and power outlet when the LCD TV set is not to be used for a long

period of time.

Preparation (Continued)

Antenna Connection

Connect to the DC input terminal of the product.

To POWER

INPUT DC 12 V

terminal

Plug into an AC outlet.

Household

power outlet

AC cord*

AC adapter

* Product shape varies in some countries.

To enjoy a clearer picture, we recommend that you use

an outdoor antenna. The following is a brief explanation

of the types of connection that are used for coaxial and

feeder cables:

(1)If your outdoor antenna uses a 75-ohm coaxial

cable, change this for a new standard DIN45325

(IEC169-2) plug and plug it into the antenna

terminal at the back of TV set via the antenna cable

(not supplied).

(2)If your outdoor antenna uses a 300-ohm twin-lead

flat feeder, change this for a 300-ohm to 75-ohm

impedance converter and plug it into the antenna

terminal at the back of TV set via the antenna cable

(not supplied).

To antenna input

terminal ( )

75-ohm coaxial cable (round cable)

300-ohm twin-lead flat feeder

7

First Installation

When you turn on the LCD TV set for the first time, the First Installation routine, which makes

installation easier, is activated. Using this routine, you can select the on-screen display language,

and automatically search for and store all the receivable channels.

1 Press the MAIN POWER switch

located on the upper part of the

main unit. The “First installation”

screen with a list of the

languages for the on-screen

display appears.

2 Press ]/[ to select the desired

language, and then press OK.

The “Location of TV set” screen

appears in the language

selected.

Note:

■ You can change the on-screen

display language after the First

Installation routine by selecting

“Language” on the TV menu (see

pages 18 and 19).

3 Press ]/[ to select the TV set

location, and then press OK. The

“Autom. programme search”

screen appears.

4 Press ]/[ to select “Start

search.”

]/[

OK

iE

CH

TV/VIDEO

SOUND

END

T

M

MENUTEXT

(

RED

)(

GREEN

)(

YELLOW

)(

CYAN

)

INFO

OK

Please enter t he TV set locat ion

fo r the cor rect TV st andard and

the appropr iate programme

c l assi f icat ion for the count ry:

Locat ion of TV set

Other . . .

GB

I

NL

PL

HU

SL

Other countries

Great Br i t ai n

Italy

Netherlands

Pol and

Hungar y

Slovenia

(

PAL- I

)

(

PAL- BG

)

(

PAL-BG

)

(

PAL-DK

)

(SECAM-DK)

(

PAL-DK

)

(Auto, -BG)

Se l ec t and

proceed with OK

Back

End

MAIN POWER

Whi ch l ang ua ge do you wan t

First installat ion

to use for operation?

Deut sch

Français

Italiano

Español

Svenska

Select and

proceed

wi t h OK

Engl i sh

Nede r lands

Preparation (Continued)

Your TV set searches wi th the

fol lowing set t ings:

Extent of search Al l progr .

Store progr . from Pr ogramme 001

Locat i on of TV set Other count r i

Aut om. programme sear ch

Back

End

Change se t t i ngs

St ar t search

8

First Installation (Continued)

Preparation (Continued)

Star t search

Search is complet ed.

19 Programmes found.

0

1

2

3

4

5

6

7

8

9

10

14

15

16

17

18

19

11

12

13

28

29

20

21

22

23

24

25

26

27

End

S01

S08

S10

S11

E03

E05

E06

E09

E10

E11

E36

E37

E38

E50

E53

E54

E56

E57

5 Press OK to begin the automatic

programme search. The bar on

the screen shows the progress.

When the search is completed,

the number of the programmes

found is displayed. The new

programmes found are displayed

in blue on the programme list.

6 Press END to exit.

iE

CH

TV/VIDEO

SOUND

END

T

M

MENUTEXT

(

RED

)(

GREEN

)(

YELLOW

)(

CYAN

)

INFO

OK

END

Star t search

Cancel

Search is ac t i ve. Pl ease wai t !

001 MHz Auto-BG

0

1

2

3

4

5

6

7

8

9

10

14

15

16

17

18

19

11

12

13

28

29

20

21

22

23

24

25

26

27

OK

9

Part Names of Main Unit

Main unit (front view)

Note:

■ TV/VIDEO, CH( )/( ), and Volume (+)/(–) on the main unit have the same functions as the same buttons on

the remote control. Fundamentally, this operation manual provides a description based on operation using the

remote control.

To change the vertical

angle of the LCD TV set,

tilt the screen up to 10

degrees forward or 20

degrees backward. The

TV set can also be

rotated 90 degrees

horizontally. Please adjust

the angle so that the TV

set can be watched most

comfortably.

Upper control panel

Volume (+)/(–)

CH ( )/( )

MENU

TV/VIDEO

(MAIN POWER)

Speaker

Remote sensor window

(The actual location is not visible.)

POWER/STANDBY indicator

A green indicator lights when the power is

on and a red indicator lights when in the

standby mode (the indicator will not light

when the main power is off).

Remote sensor indicator

A red indicator blinks when the TV set

receives the remote control signal.

10

Terminals

Part Names of Main Unit (Continued)

Rear view

RGB

POWER

INPUT

DC12V

L

R

AV-IN 1

AUDIO OUT

VIDEO

S-VIDEO

AUDIO

L

R

AV-IN 2

POWER INPUT

DC 12 V

Antenna

AUDIO OUT (L)

AV-IN 1

(21-pin Euro-

SCART)

AUDIO OUT (R)

HEADPHONES

VIDEO

AUDIO (L)

AUDIO (R)

S-VIDEO

Carrying handle

11

Part Names of Remote Control

iE

CH

TV/VIDEO

SOUND

END

T

M

MENUTEXT

(

RED

)(

GREEN

)(

YELLOW

)(

CYAN

)

INFO

OK

(Power)

OK, Programme Table

INFO

Turns on the menu

information when

the menu is displayed.

Mute

TEXT

YELLOW, Standard Value

GREEN, Sound Menu

CYAN, Teletext Subtitle

TV/VIDEO

Channel Select

MENU

Volume (+)/(–)

Flashback

Returns to the

previous channel.

RED, Picture Menu

Upward / Downward

Selection

END, Status Display

Turns on the status display

when the menu is not

displayed.

SOUND

Switches the sound mode.

Right / Left Selection

CH ( )/( )

12

Basic Operation

|

Press the MAIN POWER switch

located on the upper part of the

main unit. The Power/Standby

indicator instantaneously changes

from red to green and the main

unit is turned on.

Note:

■ The display time of the on-screen

indicators can be selected with “On-

screen time” for the “On-screen

display” menu item in the TV menu

(see page 36).

|

To turn off the main power, press

the MAIN POWER switch.

Turning On and Off the Main Power

Switching the TV/VIDEO (AV1/AV2/AVS/TV) Mode

1 Turn on the power of the

connected video equipment.

2 Press TV/VIDEO to select the

applicable input source. The

screen displays AV1, AV2, AVS or

TV mode each time TV/VIDEO is

pressed.

Note:

■ About the video modes

• AV1: Select this when viewing the

signals from the video

equipment connected to the

AV-IN 1 terminal.

• AV2: Select this when viewing the

signals from the video

equipment connected to the

AV-IN 2 terminals using the

VIDEO terminal for video

input.

• AVS: Select this when viewing the

signals from the video

equipment connected to the

AV-IN 2 terminals using the

S-VIDEO terminal for video

input.

Power/Standby indicator

MAIN POWER

198 AV2

197 AVS

1 S08

199 AV1

1 S08

On-screen display

AV1 mode

AV2 mode

AVS mode

TV mode

iE

CH

TV/VIDEO

SOUND

END

T

M

MENUTEXT

(

RED

)(

GREEN

)(

YELLOW

)(

CYAN

)

INFO

OK

TV/

VIDEO

13

Sound Volume

ON/OFF Standby

Basic Operation (Continued)

To adjust the volume

|

Press Volume (+) to increase the

sound volume. The numerical

value increases.

|

Press Volume (–) to decrease the

sound volume. The numerical

value decreases.

To mute the sound

|

Press Mute to temporarily turn off

the sound. “Sound off” is

displayed.

|

Press Mute to turn off the Mute

function. “Sound on” is displayed.

Notes:

■ When Volume (+)/(–) is pressed in the

Mute mode, the sound turns on and the

volume indicator is displayed.

■ The Mute function is cancelled when

is pressed.

To turn off the LCD TV

Press . The Power/Standby indicator

will turn red.

To turn the LCD TV back on

Press again. The Power/Standby

indicator will turn green.

iE

CH

TV/VIDEO

SOUND

END

T

M

MENUTEXT

(

RED

)(

GREEN

)(

YELLOW

)(

CYAN

)

INFO

OK

Volume

(+)/(–)

Mute

iE

CH

TV/VIDEO

SOUND

END

T

M

MENUTEXT

(

RED

)(

GREEN

)(

YELLOW

)(

CYAN

)

INFO

OK

Volume

50

Volume

10

Sound off

Sound on

14

Basic Operation (Continued)

Changing Channels

You can select channels using Channel Select or CH ( )/( ).

To select a one-digit channel

(e.g. Channel 5):

1 Hold down the button.

To select a two/three-digit channel

(e.g. Channel 15):

1 Press the button.

2 Hold down the button.

• To handle the increasing number of channels available, this LCD TV set allows you to select up to

200 channels (0 to 199).

Using Channel Select

When selecting the channel using Channel Select, finish inputting the channel number by holding down

the button for the last digit for a moment.

Using CH ( )/( )

Press CH ( ) and the channels change in the order shown below:

1 → 2 → 3 → . . . → 198 → 199 → 0 → 1 → 2 → 3 → . . .

Press CH (

) and the channels change in the order shown below:

3 → 2 → 1 → 0 → 199 → 198 → . . . → 3 → 2 → 1 → . . .

15

1

Channel

Select

iE

CH

TV/VIDEO

SOUND

END

T

M

MENUTEXT

(

RED

)(

GREEN

)(

YELLOW

)(

CYAN

)

INFO

OK

5

Note:

■ Channel “0” is prepared for RF output of VCR.

15

1 Press RED to display the Picture

menu.

Note:

■ The Picture menu can also be

displayed by selecting “Picture” in

the TV menu (see pages 18 and

19).

2 Press ]/[ to select the desired

adjustment item.

• Select “Other...” to display the

other part of the Picture menu.

3 Press </> to make the

adjustment.

4 Press END to exit.

Adjusting Picture Settings

iE

CH

TV/VIDEO

SOUND

END

T

M

MENUTEXT

(

RED

)(

GREEN

)(

YELLOW

)(

CYAN

)

INFO

OK

</>

]/[

RED

END

Contrast

Pi c ture menu

Co l our

Black level

Sharpness

Green colour ing

Red - b l ue c o l ou r i ng

Other .. .

40

Back

End

Contrast

Picture menu

Co l our

Black level

Shar pness

Green colour ing

Red - b l ue c o l ou r i ng

Other .. .

0

Back

End

Useful Features

Press Left (<)

Decrease contrast

Lower colour intensity

Less bright

Soft picture

Less green

More red

Toward purple

–

Adjustment item

Contrast

Colour

Black level

Sharpness

Green colouring

Red-blue colouring

Tint

Brightness

Rotate horizontally

Rotate vertically

Choice/Value range

0 – 60

-30 – 30

0 – 5

-5 – 5

-15 – 15

dark medium bright

off on

Press Right (>)

Increase contrast

Higher colour intensity

More bright

Sharp picture

More green

More blue

Toward green

–

Note:

■ When you use RGB mode (AV1), the image colour is not adjustable.

16

Useful Features (Continued)

Adjusting Sound Settings

1 Press GREEN to display the

Sound menu.

Note:

■ The Sound menu can also be

displayed by selecting “Sound” in

the TV menu (see pages 18 and

19).

2 Press ]/[ to select the desired

adjustment item.

• Select “Other...” to display the

other part of the Sound menu.

3 Press </> to make the

adjustment.

4 Press END to exit.

Note:

■ In the “AV audio sig.” item, mono-video recorders should select “Sound1” or “Sound2”. Stereo-video recorders should

select “Sound1+2” so that the desired sound can be selected when playing back the video.

</>

]/[

END

GREEN

iE

CH

TV/VIDEO

SOUND

END

T

M

MENUTEXT

(

RED

)(

GREEN

)(

YELLOW

)(

CYAN

)

INFO

OK

So und v i a

Sound menu

Headph. vol.

Loudsp. sound

Headph. sound

AV au d i o s i g .

Other .. .

TV Hi - f i

Back

End

So und v i a

Sound menu

Headph. vol.

Loudsp. sound

Headph. sound

AV audio sig.

Other .. .

Back

End

20

* These items are not displayed when the “Sound via” item is set to “Hi-fi”.

Press Left (<)

–

Decrease head-

phones volume

–

Decrease maximum

volume

–

Increase the volume

of the left speaker

Choice/Value range

TV Hi-fi

0 – 60

Mono Mono!/Sound1

Sound2 Sound1+2 Mono!/

Stereo Mono!/Nicam Mono!

(* The choices differ depending on

whether or not a NICAM or IGR

signal is received.)

Sound1 Sound2 Sound1+2

10 – 60

off on

-15 – 15

Press Right (>)

–

Increase head-

phones volume

–

Increase maximum

volume

–

Increase the volume

of the right speaker

Adjustment item

Sound via

Headph. vol.*

Loudsp. sound

Headph. sound*

AV audio sig.

Maximum volume*

Sound wide*

Balance*

17

Using Programme Table

The Programme table shows a list of all receivable programmes. They are located in channels 0 to 199.

The currently selected programme is displayed in blue, and the child-locked programmes are displayed in

red.

To select the desired programme

1 Press OK to display the

Programme table.

2 Press ]/[ and/or < /> to select

the desired programme.

• To display the next or previous list

of the Programme table, press

]/[ when the cursor is at a

programme in the lower-right or

upper-left position, or press </>

when the cursor is at a pro-

gramme in the right or left column.

3 Press OK to display the selected

programme.

Programme table

197

198

199

0

1

2

3

4

5

6

7

8

9

10

AV2

AVS

AV1

S01

S08

S10

S11

E03

E05

E06

E09

E10

E11

14

15

16

17

18

19

20

21

22

23

24

E36

E37

E38

E50

E53

E54

E56

E57

11

12

13

28

29

30

31

32

33

34

35

36

37

38

25

26

27

Se l ec t and

proceed wi t h OK

Back

End

Useful Features (Continued)

</>

]/[

OK

iE

CH

TV/VIDEO

SOUND

END

T

M

MENUTEXT

(

RED

)(

GREEN

)(

YELLOW

)(

CYAN

)

INFO

OK

18

Useful Features (Continued)

• The menus can be used to adjust the various settings of your LCD TV set. Select the desired menu item

by following the steps below.

1 Press MENU on the remote

control to display the TV menu.

2 Press ]/[ to select the desired

menu item.

• The cursor moves up or down.

• The cursor indicates the selected

menu item.

• Select “Other...” to display the

other part of the menu.

3 Press OK to display the setting

screen for the selected menu

item.

• See the next page for a table of

the setting screens.

4 Press MENU to return to the

previous screen or END to return

to the normal screen.

Selecting Menu Items

Notes:

■ The items displayed differ depending on the setting conditions.

■ The item selected is displayed in blue.

■ The adjustment values and settings which were changed before the screen is restored are saved as they are in the

memory.

Upper Control panel

of the main unit

Standard settings

TV menu

Picture

Sound

Programmes

AV connec t i ons

Ch i l d l oc k

Back

End

Other .. .

TV menu

On-screen display

Timer functions

Time and date

First instal lat ion

Other .. .

Back

End

Language

Black level

Direct control at TV

Cont r as t

Col our

E

:

End

: Selec t

M

:

Back

: Change

0

■ Using TV Menus

■ Using Direct Control Menu

1 Press MENU on the main unit to

display the Direct Control menu.

2 Press CH ( )/( ) to select the

desired menu item.

• The cursor moves up or down.

• The cursor indicates the selected

menu item.

3 Press Volume (+)/(–) to make the

adjustment.

• See page 15 for details on the use

of each item.

4 Press MENU to turn off the Direct

Control menu.

CH (

)/( )

Volume

(+)/(–)

MENU

iE

CH

TV/VIDEO

SOUND

END

T

M

MENUTEXT

(

RED

)(

GREEN

)(

YELLOW

)(

CYAN

)

INFO

OK

]/[

MENU

END

CH MENU TV/VIDEO

Sidan laddas ...

Sharp LC-13B2E Bruksanvisning

Denna manual är också lämplig för

Sharp LC-13B2E Bruksanvisning

på andra språk

Andra dokument