Sony XR-C7500RX Bruksanvisning

 2000 Sony Corporation

FM/MW/LW

Cassette

Car Stereo

3-046-400-11 (2)

Operating Instructions

Manual de instrucciones

Bruksanvisning

Manual de instruções

GB

ES

PT

SE

XR-C7500RX

XR-C7500R

For installation and connections, see the supplied installation/connections

manual.

Para obtener información sobre la instalación y las conexiones, consulte el manual

de instalación/conexiones suministrado.

Vi hänvisar till det medföljande häftet angående montering/anslutningar.

Para a instalação e as ligações, consulte o manual de instalação/ligações

fornecido.

FM/MW/LW Cassette Car Stereo

2

Welcome !

Thank you for purchasing this Sony Cassette

Player. This unit lets you enjoy a variety of

features using the following controller

accessory:

Supplied accessory

Rotary commander RM-X4S

Optional accessory

Card remote commander RM-X91

In addition to the cassette playback and radio

operations, you can expand your system by

connecting an optional CD/MD unit*

1

.

When you operate this unit or a connected

optional CD unit with the CD TEXT function,

the CD TEXT information will appear in the

display when you play a CD TEXT disc*

2

.

*

1

You can connect a CD changer, an MD changer,

a CD player, or an MD player.

*

2

A CD TEXT disc is an audio CD that includes

information such as the disc name, artist name,

and track names.

This information is recorded on the disc.

Precautions

• If your car was parked in direct sunlight

resulting in a considerable rise in

temperature inside the car, allow the unit to

cool off before operating it.

• If no power is being supplied to the unit,

check the connections first. If everything is in

order, check the fuse.

• If no sound comes from the speakers of a

two-speaker system, set the fader control to

the centre position.

• When a tape is played back for a long period,

the cassette may become warm because of

the built-in power amplifier. However, this is

not a sign of malfunction.

If you have any questions or problems

concerning your unit that are not covered in

this manual, please consult your nearest Sony

dealer.

To maintain high quality sound

If you have drink holders near your audio

equipment, be careful not to splash juice or

other soft drinks onto the car audio. Sugary

residues on this unit or cassette tapes may

contaminate the playback heads, reduce the

sound quality, or prevent sound reproduction

altogether.

Cassette cleaning kits cannot remove sugar

from the tape heads.

3

Notes on Cassettes

Cassette care

• Do not touch the tape surface of a cassette, as

any dirt or dust will contaminate the heads.

• Keep cassettes away from equipment with

built-in magnets such as speakers and

amplifiers, as erasure or distortion on the

recorded tape could occur.

• Do not expose cassettes to direct sunlight,

extremely cold temperatures, or moisture.

• Slack in the tape may cause the tape to be

caught in the machine. Before you insert the

tape, use a pencil or similar object to turn the

reel and take up any slack.

• Distorted cassettes and loose labels can cause

problems when inserting or ejecting tapes.

Remove or replace loose labels.

• The sound may become distorted while

playing the cassette. The cassette player head

should be cleaned after each 50 hours of use.

Slack

Cassettes longer than 90 minutes

The use of cassettes longer than 90 minutes is

not recommended except for long continuous

play. The tape used for these cassettes is very

thin and tends to stretch easily. Frequent

playing and stopping of these tapes may cause

them to become entangled in the cassette deck

mechanism.

4

Table of Contents

Location of controls ................................................. 5

Getting Started

Resetting the unit ................................................ 7

Detaching the front panel .................................. 7

Turning the unit on/off ...................................... 8

How to use the menu ......................................... 8

Setting the clock .................................................. 9

Cassette Player

Listening to a tape ............................................. 10

Playing a tape in various modes ......................11

Radio

Memorising stations automatically

— Best Tuning Memory (BTM).................. 12

Memorising only the desired stations............ 12

Receiving the memorised stations .................. 13

RDS

Overview of the RDS function ........................ 14

Displaying the station name............................ 14

Retuning the same programme automatically

— Alternative Frequencies (AF) ................ 15

Listening to traffic announcements ................ 16

Presetting the RDS stations with the AF and

TA data .......................................................... 17

Locating a station by programme type .......... 17

Setting the clock automatically ....................... 18

DAB

Overview of DAB.............................................. 19

Basic operations of DAB .................................. 19

Presetting DAB services automatically

— BTM .......................................................... 20

Presetting DAB services manually

— Manual Preset Memory ......................... 21

Listening to a DAB programme ...................... 22

Settings on the audio reception....................... 23

Locating a DAB service by programme type

(PTY) .............................................................. 23

DSP

Setting the equalizer ......................................... 24

Selecting the listening position ....................... 25

Selecting a soundstage menu

— Dynamic Soundstage Organizer

(DSO) ............................................................. 25

Adjusting the balance (BAL) ........................... 26

Adjusting the front and rear fader.................. 26

Listening to each programme source in its

registered DSO

— Source Sound Memory (SSM) ............... 27

Selecting the spectrum analyzer ..................... 27

Other Functions

Labelling the rotary commander .................... 28

Using the rotary commander .......................... 28

Attenuating the sound ..................................... 29

Changing the sound and display settings ..... 30

CD/MD Unit

Playing a CD or MD ......................................... 31

Playing tracks repeatedly

— Repeat Play .............................................. 32

Playing tracks in random order

— Shuffle Play .............................................. 32

Labelling a CD

— Disc Memo (For a CD unit with the

custom file function).................................... 33

Locating a disc by name

— List-up (For a CD unit with the custom

file function or an MD unit) ....................... 34

Selecting specific tracks for playback

— Bank (For a CD unit with the custom

file function) ................................................. 35

Additional Information

Maintenance....................................................... 36

Dismounting the unit ....................................... 37

Specifications ..................................................... 38

Troubleshooting guide ..................................... 39

5

Location of controls

1 MENU button

9, 11, 12, 13, 15, 17, 18, 20, 21, 23, 24,

26, 27, 30, 31, 33, 34, 35

2 Volume control dial

3 SOURCE (TUNER/TAPE/CD/MD) button

6, 8, 10, 12, 13, 19, 20, 24, 25, 26, 27, 31,

34

4 PRST/DISC +/– (cursor up/down) buttons

8, 9, 11, 12, 13, 15, 17, 18, 19, 20, 21, 22,

23, 24, 26, 27, 30, 31, 32, 33, 34, 35

During radio reception:

Preset stations select 13

During CD/MD playback:

Disc change 32

5 DSPL/PTY (display mode change/

programme type) button

11, 18, 23, 31, 33

6 LIST button

Disc memo 33

List-up 22, 34

7 Display window

8

Z (eject) button (located on the front side

of the unit behind the front panel)

10

9 OPEN button 7, 10, 36

q; DSO button 26

qa SOUND button 24, 25, 26

qs OFF button* 6, 7, 8, 10

qd Reset button (located on the front side

of the unit behind the front panel) 7

qf SEEK/AMS –/+ (cursor left/right) buttons

8, 9, 10, 11, 12, 13, 15, 17, 18, 19, 21, 23,

24, 25, 26, 27, 30, 31, 32, 33, 35

Seek 13, 15, 19

Automatic Music Sensor 10, 32

Manual search 13, 32

XR-C7500RX/XR-C7500R

D

I

S

C

+

P

R

S

T

+

D

I

S

C

–

P

R

S

T

-

SOURCE

DSPL

LIST

AF

OFF

PTY

ENTER

MENU

SOUND

1 2 3 4 56

-

SEEK/AMS

REP SHUF

TA

OPEN

MODE

DSO

qg ENTER button

9, 11, 12, 13, 15, 17, 18, 20, 21, 22, 23,

24, 26, 27, 30, 31, 33, 34, 35

qh MODE button 10, 11, 12, 13, 19, 20, 31,

34

During tape playback:

Playback direction change 10

During radio reception:

BAND select 12, 13

During CD/MD playback:

CD/MD unit select 31

qj Receptor for the card remote

commander

qk Number buttons

During radio reception:

Preset number select

12, 13, 16, 17, 20, 21

During tape playback:

(1) REP 11

During CD/MD playback:

(1) REP 32

(2) SHUF 32

ql AF button 15, 17

w; TA button 16, 17

* Warning when installing in a car

without ACC (accessory) position on

the ignition key switch

Be sure to press (OFF) on the unit for two

seconds to turn off the clock display after

turning off the engine.

When you press (OFF) only momentarily,

the clock display does not turn off and this

causes battery wear.

Refer to the pages listed for details.

6

Optional

Card remote commander RM-X91

Replacing the lithium battery

When the battery becomes weak, the range of

the card remote commander becomes shorter.

Replace the battery with a new CR2025 lithium

battery.

Notes on lithium battery

•Keep the lithium battery out of the reach of

children. Should the battery be swallowed,

immediately consult a doctor.

•Wipe the battery with a dry cloth to assure a

good contact.

•Be sure to observe the correct polarity when

installing the battery.

•Do not hold the battery with metallic

tweezers, otherwise a short-circuit may

occur.

WARNING

Battery may explode if mistreated.

Do not recharge, disassemble, or dispose of

in fire.

The corresponding buttons of the card

remote commander control the same

functions as those on this unit.

1 OFF button

2 MENU button

3 SOURCE button

4 SEEK/AMS (cursor </,) buttons

5 SOUND button

6 DSPL/PTY button

7 ATT button

8 LIST button

9 DISC/PRST (cursor M/m) buttons

q; ENTER button

qa MODE button

qs VOL buttons

x

+ side up

OFF

SEEK SEEK

OPEN/CLOSE

MENU LIST

SOUND

ENTER

DISC

SOURCE

DSPL MODE

VOLATT

A unit turned off by pressing (OFF) for two seconds cannot be operated with the card remote

commander unless (SOURCE) on the unit is pressed or a cassette is inserted to activate the unit

first.

7

Attaching the front panel

Place the hole A of the front panel onto the

spindle B on the unit as illustrated, then push

the left side in.

Notes

• Be careful not to attach the front panel upside

down.

• Do not press the front panel too hard against the

unit when attaching it.

• Do not press too hard or put excessive pressure

on the display window of the front panel.

• Do not expose the front panel to direct sunlight

or heat sources such as hot air ducts, and do not

leave it in a humid place. Never leave it on the

dashboard of a car parked in direct sunlight or

where there may be a considerable rise in

temperature.

Caution alarm

If you turn the car ignition off without

removing the front panel, the caution alarm

will beep for a few seconds.

If you connect an optional power amplifier and

do not use the built-in amplifier, the beep

sound will be deactivated.

Getting Started

Resetting the unit

Before operating the unit for the first time or

after replacing the car battery, you must reset

the unit.

Remove the front panel and press the reset

button with a pointed object, such as a

ballpoint pen.

Note

Pressing the reset button will erase the clock

setting and some memorised functions.

Detaching the front panel

You can detach the front panel of this unit to

protect the unit from being stolen.

1 Press (OFF).

2 Press (OPEN), then slide the front panel

to the right side, and pull out from the

left side.

Notes

• Be sure not to drop the panel when detaching it

from the unit.

• If you detach the panel while the unit is still

turned on, the power will turn off automatically

to prevent the speakers from being damaged.

• When you carry the front panel with you, use the

supplied front panel case.

Reset button

1

2

A

x

B

8

SOURCE

(–) : To select

leftwards

(+) : To select

rightwards

Turning the unit on/off

Turning on the unit

Press (SOURCE) or insert a cassette in the

unit. For details on operation, refer to page 10

(cassette player) and page 12 (radio).

Turning off the unit

Press (OFF) to stop tape playback or FM/

MW/LW reception (the key illumination and

display remains on.)

Press (OFF) for two seconds to completely

turn off the unit.

Note

If your car has no ACC position on the ignition key

switch, be sure to turn the unit off by pressing

(OFF) for two seconds to avoid car battery wear.

How to use the menu

This unit is operated by selecting items from a

menu.

To select, first enter the menu mode and

choose up/down (+/– of (PRST/DISC)), or

choose left/right (–/+ of (SEEK/AMS)).

(PRST/DISC)

(+) : To select upwards

(–) : To select downwards

(SEEK/AMS)

SOURCE

9

2 Press (ENTER).

The clock starts.

After the clock setting is complete, the

display returns to normal playback mode.

Tips

• You can use the convenient CT function to set

the clock automatically (page 18).

• When the D.Info mode is set to on, the time is

always displayed (page 30).

Setting the clock

The clock uses a 24-hour digital indication.

Example: To set the clock to 10:08

1 Press (MENU), then press either side of

(PRST/DISC) repeatedly until “Clock”

appears.

1 Press (ENTER).

The hour indication flashes.

2 Press either side of (PRST/DISC) to set

the hour.

3 Press (+) side of (SEEK/AMS).

The minute indication flashes.

4 Press either side of (PRST/DISC) to set

the minute.

10

Cassette Player

Listening to a tape

1 Press (OPEN) and insert a cassette.

Playback starts automatically.

2 Close the front panel.

If a cassette is already inserted, to start

playback, press (SOURCE) repeatedly until

“FWD” or “REV” appears.

Tip

To change the tape‘s playback direction, press

(MODE) (o).

To Press

Stop playback (OFF)

Eject the cassette (OPEN) then Z

Fast-winding the tape

During playback, press and hold either

side of (SEEK/AMS).

To start playback during fast-forwarding or

rewinding, press (MODE) (o).

Locating a specific track

— Automatic Music Sensor (AMS)

During playback, press either side of

(SEEK/AMS) momentarily for each track

you want to skip.

You can skip up to nine tracks at one time.

Note

The AMS function may not work when:

— the blanks between tracks are shorter than

four seconds

— there is noise between tracks

— there are long sections of low volume or quiet

sections.

In the Motion Display mode, all the items are

scrolled in the display one by one in order.

Tip

The Motion Display mode can be turned off. (See

“Changing the sound and display settings” on

page 30.)

To locate

preceding

tracks

To locate

succeeding

tracks

Rewind

Fast-forward

SOURCE

The side facing up is played.

The side facing down is played.

11

Playing a tape in various

modes

You can play the tape in various modes:

•Repeat (Repeat Play) repeats the current

track.

•NR (Dolby NR) lets you select the Dolby* NR

B system.

•Metal lets you play a metal or CrO2 tape.

•B.Skip (Blank Skip) skips blanks longer than

eight seconds.

•ATA (Automatic Tuner Activation) turns on

the tuner automatically when fast-winding

the tape.

* Dolby noise reduction manufactured under

license from Dolby Laboratories Licensing

Corporation.

”DOLBY“ and the double-D symbol ; are

trademarks of Dolby Laboratories Licensing

Corporation.

1 During playback, press (MENU).

2 Press either side of (PRST/DISC)

repeatedly until the desired item

appears.

Each time you press (–) side of

(PRST/DISC), the item changes as follows:

NR t Metal t B.Skip t ATA

3 Press (+) side of (SEEK/AMS) to select

“on.”

Play mode starts.

4 Press (ENTER).

To return to normal playback mode, select

“off” in step 3.

Tip

While the ATA function is activated, the display

(TAPE y TUNER) can be changed by pressing

(DSPL/PTY).

LIST

DSPL

Y

ENTER

1 2 3 4 56

-

SEEK/AMS

REP SHUF

MODE

Playing tracks repeatedly

— Repeat Play

During playback, press (1) (REP)

repeatedly until “Repeat on” in the

display appears.

Repeat on y Repeat off

Repeat Play starts.

To return to normal playback mode, select

“Repeat off.”

Tip

During repeat playback, press (MODE). “REP”

disappears from the display and repeat mode is

cancelled.

12

Radio

Memorising stations

automatically

— Best Tuning Memory (BTM)

The unit selects the stations with the strongest

signals and memorises them in the order of

their frequencies. You can store up to 6 stations

on each band (FM1, FM2, FM3, MW, and LW).

Caution

When tuning in stations while driving, use

Best Tuning Memory to prevent accidents.

1 Press (SOURCE) repeatedly to select the

tuner.

Each time you press (SOURCE), the source

changes as follows:

B TUNER B CD* B MD* B TAPE

* If the corresponding optional equipment is

not connected, this item will not appear .

2 Press (MODE) repeatedly to select the

band.

Each time you press (MODE), the band

changes as follows:

B FM1 B FM2 B FM3 B MW B LW

3 Press (MENU), then press either side of

(PRST/DISC) repeatedly until “BTM”

appears.

4 Press (ENTER).

The unit stores stations in the order of their

frequencies on the number buttons.

A beep sounds when the setting is stored.

Notes

• The unit does not store stations with weak

signals. If only a few stations can be received,

some number buttons will retain their former

setting.

• When a number is indicated in the display, the

unit starts storing stations from the one currently

displayed.

Memorising only the

desired stations

You can preset up to 18 FM stations (6 each for

FM1, 2, and 3), up to 6 MW stations, and up to

6 LW stations in the order of your choice.

1 Press (SOURCE) repeatedly to select the

tuner.

2 Press (MODE) repeatedly to select the

band.

3 Press either side of (SEEK/AMS) to tune

in the station that you want to store on

the number button.

4 Press the desired number button ((1) to

(6)) until “MEM” appears.

The number button indication appears in

the display.

Note

If you try to store another station on the same

number button, the previously stored station will

be erased.

13

If FM stereo reception is poor

— Monaural Mode

1 During radio reception, press (MENU),

then press either side of (PRST/DISC)

repeatedly until “Mono” appears.

2 Press (+) side of (SEEK/AMS) until

“Mono on“ appears.

The sound improves, but becomes

monaural (“ST” disappears).

3 Press (ENTER).

To return to normal mode, select

“Mono off” in step 2.

In the Motion Display mode, all the items are

scrolled in the display one by one in order.

Tip

The Motion Display mode can be turned off. (See

“Changing the sound and display settings” on

page 30.)

Receiving the memorised

stations

1 Press (SOURCE) repeatedly to select the

tuner.

2 Press (MODE) repeatedly to select the

band.

3 Press the number button ((1) to (6)) on

which the desired station is stored.

Tip

Press either side of (PRST/DISC) to receive the

stations in the order they are stored in the memory

(Preset Search Function).

If you cannot tune in a preset

station

Press either side of (SEEK/AMS) to search

for the station (automatic tuning).

Scanning stops when the unit receives a

station. Press either side of (SEEK/AMS)

repeatedly until the desired station is

received.

Note

If the automatic tuning stops too frequently, press

(MENU), then press either side of (PRST/DISC)

repeatedly until “Local” (local seek mode) is

displayed. Then press (+) side of (SEEK/AMS) to

select “Local on.” Press (ENTER).

During local reception and station selection, “LCL

Seek” appears in the display.

Only the stations with relatively strong signals will

be tuned in.

Tips

• When you select the “Local on” setting, “LCL

Seek” appears while the unit is searching for a

station.

• If you know the frequency of the station you

want to listen to, press and hold either side of

(SEEK/AMS) until the desired frequency appears

(manual tuning).

14

RDS

Overview of the RDS

function

Radio Data System (RDS) is a broadcasting

service that allows FM stations to send

additional digital information along with the

regular radio programme signal. Your car

stereo offers you a variety of services. Here are

just a few: retuning the same programme

automatically, listening to traffic

announcements, and locating a station by

programme type.

Notes

• Depending on the country or region, not all of

the RDS functions are available.

• RDS may not work properly if the signal strength

is weak or if the station you are tuned to is not

transmitting RDS data.

Displaying the station

name

The name of the current station lights up in the

display.

Select an FM station (page 12).

When you tune in an FM station that

transmits RDS data, the station name

appears in the display.

Note

The “*” indication means that an RDS station is

being received.

In the Motion Display mode, all the items are

scrolled in the display one by one in order.

Tip

The Motion Display mode can be turned off. (See

“Changing the sound and display settings” on

page 30.)

15

Changing the display item

Each time you press (AF), the item changes as

follows:

AF on y AF off

Notes

• When “NO AF” and the station name flash

alternately, it means that the unit cannot find an

alternative station in the network.

• If the station name starts flashing after selecting

a station with the AF function on, this indicates

that no alternative frequency is available. Press

either side of (SEEK/AMS) while the station name

is flashing (within eight seconds). The unit starts

searching for another frequency with the same PI

(Programme Identification) data (“PI Seek”

appears and no sound is heard). If the unit

cannot find another frequency, “NO PI” appears,

and the unit returns to the previously selected

frequency.

Listening to a regional programme

The “REG on” (regional on) function lets you

stay tuned to a regional programme without

being switched to another regional station.

(Note that you must turn the AF function on.)

The unit is factory preset to “REG on,” but if

you want to turn off the function, do the

following.

1 During radio reception, press (MENU),

then press either side of (PRST/DISC)

repeatedly until “REG” appears.

2 Press (+) side of (SEEK/AMS) until

“REG off” appears.

3 Press (ENTER).

Note that selecting “REG off” might cause

the unit to switch to another regional

station within the same network.

To return to regional on, select “REG on” in

step 2.

Note

This function does not work in the United

Kingdom and in some other areas.

Retuning the same

programme automatically

— Alternative Frequencies (AF)

The Alternative Frequencies (AF) function

automatically selects and retunes the station

with the strongest signal in a network. By

using this function, you can continuously

listen to the same programme during a long-

distance drive without having to retune the

station manually.

1 Select an FM station (page 12).

2 Press (AF) repeatedly until “AF on”

appears.

The unit starts searching for an alternative

station with a stronger signal in the same

network.

Note

When there is no alternative station in the area

and you do not need to search for an alternative

station, turn the AF function off by pressing

(AF) repeatedly until “AF off” appears.

102.5MHz

96.0MHz

98.5MHz

Frequencies change automatically.

Station

continue to next page t

16

Local link function

(United Kingdom only)

The Local Link function lets you select other

local stations in the area, even if they are not

stored on your number buttons.

1 Press a number button that has a local

station stored on it.

2 Within five seconds, press the number

button of the local station again.

3 Repeat this procedure until the desired

local station is received.

Listening to traffic

announcements

The Traffic Announcement (TA) and Traffic

Programme (TP) data let you automatically

tune in an FM station that is broadcasting

traffic announcements even if you are listening

to other programme sources.

Press (TA) repeatedly until “TA on”

appears.

The unit starts searching for traffic

information stations. “TP” appears in the

display when the unit finds a station

broadcasting traffic announcements.

When the traffic announcement starts,

“TA” flashes. The flashing stops when the

traffic announcement is over.

Tip

If the traffic announcement starts while you are

listening to another programme source, the unit

automatically switches to the announcement and

goes back to the original source when the

announcement is over.

Notes

•

“NO TP” flashes for five seconds if the received

station does not broadcast traffic announcements.

Then, the unit starts searching for a station that

broadcasts it.

• When “EON” appears with “TP” in the display,

the current station makes use of broadcast traffic

announcements by other stations in the same

network.

To cancel the current traffic

announcement

Press (TA).

To cancel all traffic announcements, turn off

the function by pressing (TA) until

“TA off” appears.

Presetting the volume of traffic

announcements

You can preset the volume level of the traffic

announcements beforehand so you won’t

miss the announcement. When a traffic

announcement starts, the volume will be

automatically adjusted to the preset level.

1 Turn the volume control dial to adjust

the desired volume level.

2 Press (TA) for two seconds.

“TA” appears and the setting is stored.

Receiving emergency

announcements

If an emergency announcement comes in while

you are listening to the radio, the programme

will automatically switch to it. If you are

listening to a source other than the radio, the

emergency announcements will be heard if

you set AF or TA to on. The unit will then

automatically switch to these announcements

no matter which source you are listening to at

the time.

17

Presetting the RDS

stations with the AF and

TA data

When you preset RDS stations, the unit stores

each station’s data as well as its frequency, so

you don’t have to turn on the AF or TA

function every time you tune in the preset

station. You can select a different setting (AF,

TA, or both) for individual preset stations, or

the same setting for all preset stations.

Presetting the same setting for all

preset stations

1 Select an FM band (page 12).

2 Press (AF) and/or (TA) to select “AF on”

and/or “TA on.”

Note that selecting “AF off” or “TA off”

stores not only RDS stations, but also

non-RDS stations.

3 Press (MENU), then press either side of

(PRST/DISC) repeatedly until “BTM”

appears.

4 Press (+) side of (SEEK/AMS) until “BTM”

flashes.

5 Press (ENTER).

Presetting different settings for

each preset station

1 Select an FM band, and tune in the

desired station.

2 Press (AF) and/or (TA) to select “AF on”

and/or “TA on.”

3 Press the desired number button and

hold until “MEM” appears.

Repeat from step 1 to preset other stations.

Locating a station by

programme type

You can locate the station you want by

selecting one of the programme types shown

below.

Programme types Display

News News

Current Affairs Affairs

Information Info

Sports Sport

Education Educate

Drama Drama

Culture Culture

Science Science

Varied Varied

Popular Music Pop M

Rock Music Rock M

Easy Listening Easy M

Light Classical Light M

Classical Classics

Other Music Type Other M

Weather Weather

Finance Finance

Children’s Programmes Children

Social Affairs Social A

Religion Religion

Phone In Phone In

Travel Travel

Leisure Leisure

Jazz Music Jazz

Country Music Country

National Music Nation M

Oldies Music Oldies

Folk Music Folk M

Documentary Document

Not specified None

Note

You cannot use this function in some countries

where no PTY (Programme Type selection) data is

available.

continue to next page t

18

Setting the clock

automatically

The CT (Clock Time) data from the RDS

transmission sets the clock automatically.

1 During radio reception, press (MENU),

then press either side of (PRST/DISC)

repeatedly until “CT” appears.

2 Press (+) side of (SEEK/AMS) repeatedly

until “CT on” appears.

The clock is set.

3 Press (ENTER) to return to the normal

display.

To cancel the CT function

Select “CT off” in step 2.

Notes

• The CT function may not work even though an

RDS station is being received.

• There might be a difference between the time

set by the CT function and the actual time.

1 Press (DSPL/PTY) during FM reception

until “PTY” appears.

The current programme type name appears

if the station is transmitting the PTY data.

“- - - - -” appears if the received station is

not an RDS station, or if the RDS data has

not been received.

2 Press either side of (PRST/DISC)

repeatedly until the desired programme

type appears.

The programme types appear in the order

shown in the above table. Note that you

cannot select “None” (Not specified) for

searching.

3 Press (ENTER).

The unit starts searching for a station

broadcasting the selected programme type.

19

Basic operations of DAB

Searching for the Ensemble and

Service

— Automatic Tuning

1 Press (SOURCE) repeatedly to select the

tuner.

2 Press (MODE) repeatedly to select

“DAB.”

3 Press and hold either side of (SEEK/AMS)

until “Seek +” or “Seek –” appears.

4 Press either side of (SEEK/AMS) to search

the desired service.

Note

The “

” indication flashes while the unit is

searching the Ensemble.

Selecting the Ensemble

— Manual Tuning

If you know the channel number of Ensemble,

follow the procedure below to tune in.

1 Press (SOURCE) repeatedly to select the

tuner.

2 Press (MODE) repeatedly to select

“DAB.”

3 Press either side of (PRST/DISC) until

“Ch. XXX” appears.

4 Press either side of (PRST/DISC)

repeatedly until the desired channel

number appears.

Tip

More than one channel broadcast the same

Ensemble.

DAB

Overview of DAB

DAB (Digital Audio Broadcasting) is a new

multimedia broadcasting system that

transmits audio programmes with a quality

comparable to that of CDs. This is made

possible by the use of a microcomputer in the

DAB tuner which uses the radio signals sent

from multiple aerials and multi-path signals

(reflected radio waves) to boost the strength of

the main signal. This makes DAB almost

immune to radio interference even in a moving

object such as a car.

Each DAB station bundles radio programmes

(services) into an ensemble which it then

broadcasts. Each service contains one or more

components. All ensembles, services, and

components are identified by name, so you can

access any of them without having to know

their frequencies.

Notes

• The DAB system is actually in a testing phase.

This means some services have not been

sufficiently defined or are presently being tested.

At present, such services are not supported by

the optional DAB tuner unit XT-100DAB.

• DAB programmes are broadcast in Band-III (174

to 240 MHz) and L-Band (1,452 to 1,492 MHz),

with each band divided into channels (41 in

Band-III and 23 in L-Band). One ensemble is

broadcast per channel by each DAB station.

DAB programme

Ensemble

Component

Service

continue to next page t

20

Presetting DAB services

automatically — BTM

The BTM (Best Tuning Memory) function picks

out DAB ensembles and automatically assigns

the services within the ensembles to preset

service numbers. The unit can preset up to 40

services. If services have been previously set,

the BTM function operates under the following

conditions:

•If you activate the BTM function while

listening to a preset service, the unit will

store detected services (by overwriting) only

to preset numbers higher than that of the

current present service.

•If you activate the function while listening to

a service that is not preset, the unit will

replace the contents of all preset numbers.

•In both cases above, if the unit detects a

service that is identical to one already preset,

the previously stored service remains

unchanged and the newly detected service is

not preset.

1 While listening to a DAB programme,

press (MENU).

2 Press either side of (PRST/DISC)

repeatedly until “BTM” appears.

3 Press (ENTER).

A beep sounds when the service is stored.

After activating the BTM function, the unit

tunes the service assigned in the preset

memory 1 automatically.

Note

If the unit can only tune in a few services, the BTM

function may not assign services to all the preset

service numbers.

Receiving the memorised services

Following procedure is available after

presetting the service. For details on presetting

the services, refer to “Presetting DAB services

automatically,” and “Presetting DAB services

manually” (page 21).

1 Press (SOURCE) repeatedly to select the

tuner.

2 Press (MODE) repeatedly to select

“DAB.”

3 Press either side of (PRST/DISC)

repeatedly to select the preset service.

Tip

There is another way to receive the preset service.

Press number buttons ((1) to (6)) on which the

desired service is stored.

Sidan laddas...

Sony XR-C7500RX Bruksanvisning

Denna manual är också lämplig för

Sony XR-C7500RX Bruksanvisning

på andra språk

Relaterade papper

Andra dokument