Husqvarna FS 305 Användarmanual

FS 305, FS 309

EN Operator's manual 2-21

FR Manuel d'utilisation 22-41

DE Bedienungsanweisung 42-62

IT Manuale dell'operatore 63-82

ES Manual de usuario 83-102

NL Gebruiksaanwĳzing 103-122

SV Bruksanvisning 123-141

PT Manual do utilizador 142-161

Contents

Introduction..................................................................... 2

Safety..............................................................................5

Operation........................................................................ 9

Maintenance................................................................. 14

Transportation, storage and disposal........................... 17

Technical data.............................................................. 18

Declaration of Conformity............................................. 20

Introduction

Product description

The product is a walk behind floor saw with a 4-stroke

gasoline engine.

Intended use

This product is used with diamond blades for wet cutting

to cut hard floor surface materials such as concrete,

asphalt and stone. All other use is incorrect.

The product is used in industrial operations by operators

with experience.

Do not use indoors, this product is for outdoor use only.

21919 - 002 - 23.01.2023

Product overview

19

18

Note: The illustration shows one type of engine. If your product has a different engine, the engine parts can be in

different positions.

1. Handle

2. Engine ON/OFF switch

3. Cutting depth wheel

4. Cutting depth indicator

5. Fuel tank

6. Engine oil drain

7. Pointer

8. Drive belt cover

9. Blade guard

10. Servicing tool

11. Water tap

12. Water tank (only on some product versions)

13. Machine stop button

14. Lifting eye

15. Water tank lid (only on some product versions)

16. Muffler

17. Handle adjustment pinch bolt

18. Rating plate

19. Operator's manual

Symbols on the product

WARNING: This product can be

dangerous and cause serious injury or

death to the operator or others. Be careful

and use the product correctly.

1919 - 002 - 23.01.2023 3

WARNING: The dust can cause health

problems. Use an approved respiratory

protection. Always make sure that there is

good airflow.

Make sure that the cutting blade is

applicable to the same speed or a

higher speed than the value given on the

product. A cutting blade that is operated at

too high speed can break and cause injury

or damage.

Do not use the product near flammable

material or gases.

Make sure that the cutting blade is not

blunt or has damages, such as cracks.

Risk of cut injuries. Keep all body parts

away from the cutting blade.

The blade guards must always be

installed on the product. Do not let more

than 180° of the cutting blade show.

Keep body parts away from the cutting

blade and other moving parts.

Read the operator's manual carefully

and make sure that you understand the

instructions before you use this product.

Use hearing protection, eye protection

and respiratory protection. Refer to

Personal protective equipment on page

7

.

All displacement of the machine outside

the cutting area shall be carried out with

the tool not in rotation.

Remove the blade before transportation,

when you lift, put on or remove the

product.

Machine stop button.

Lift/lower control.

Always lift the product at the lifting point.

Noise emission to the environment label

as refer to EU and UK directives and

regulations. The guaranteed sound power

level of the product is specified in

Technical data on page 18

,

Noise and

vibration declaration statement on page

19

and on the label.

The arrow on the blade guard shows in

which direction the cutting blade rotates.

Gasoline is very flamma-

ble and explosive. Always

stop the engine and let it

become cool before you

refuel.

The exhaust fumes from the engine

contain carbon monoxide, an odourless,

poisonous and very dangerous gas. Do

not start the engine indoors or in closed

spaces.

Fill tank only with water.

Hot surface.

This product complies with applicable EC

Directives.

41919 - 002 - 23.01.2023

Rating plate

2

1

9

4

5

6

7

8

10

3

1. CE marking

2. Manufacturer

3. Manufacturer address

4. Type designation

5. Serial number

6. Product weight, kg

7. Maximum blade diameter, mm

8. Maximum blade shaft speed, rpm

9. Product number

10. Maximum power input, kW

Product liability

As referred to in the product liability laws, we are not

liable for damages that our product causes if:

• the product is incorrectly repaired.

• the product is repaired with parts that are not

from the manufacturer or not approved by the

manufacturer.

• the product has an accessory that is not from the

manufacturer or not approved by the manufacturer.

• the product is not repaired at an approved service

center or by an approved authority.

Safety

Safety definitions

Warnings, cautions and notes are used to point out

specially important parts of the manual.

WARNING: Used if there is a risk of

injury or death for the operator or bystanders

if the instructions in the manual are not

obeyed.

CAUTION: Used if there is a risk of

damage to the product, other materials or

the adjacent area if the instructions in the

manual are not obeyed.

Note: Used to give more information that is necessary

in a given situation.

General safety instructions

WARNING: Read the warning

instructions that follow before you use the

product.

• This product is a dangerous tool if you are not

careful or if you use the product incorrectly. This

product can cause serious injury or death to the

operator or others. Before you use the product,

you must read and understand the contents of this

operator’s manual.

• Save all warnings and instructions.

• Comply with all applicable laws and regulations.

• The operator and the employer of the operator must

know and prevent the risks during operation of the

product.

• Do not let a person operate the product unless they

read and understand the contents of the operator's

manual.

• Do not operate the product unless you receive

training before use. Make sure that all operators

receive training.

• Do not let a child operate the product.

• Only let approved persons operate the product.

• The operator is responsible for accidents that occur

to other persons or their property.

• Do not use the product if you are tired, ill, or under

the influence of alcohol, drugs or medicine.

• Always be careful and use your common sense.

• This product produces an electromagnetic field

during operation. This field can under some

circumstances interfere with active or passive

medical implants. To decrease the risk of serious

injury or death, we recommend persons with medical

implants to speak to their physician and the medical

implant manufacturer before operating this product.

• Keep the product clean. Make sure that you can

clearly read signs and decals.

• Do not use the product if it is damaged.

• Do not make modifications to this product.

• Do not operate the product if it is possible that other

persons have made modifications to the product.

1919 - 002 - 23.01.2023 5

Safety instructions for operation

WARNING: Read the warning

instructions that follow before you use the

product.

• Read the warning instructions that are supplied with

the cutting blade by the cutting blade manufacturer.

• Make sure that the product is assembled correctly.

• Do not operate the product without the blade guard

and the protective covers installed.

• Do not operate the product with the front of the blade

guard lifted or opened. The blade guard must be

lowered and correctly attached.

• Incorrect operation of the product can cause the

cutting blade to break and cause injury or damage.

• Make sure that you know how to stop the engine

quickly in an emergency.

• Use personal protective equipment. Refer to

Personal protective equipment on page 7

.

• Make sure that only approved persons are in the

work area.

• Make sure that electrical cables in the work area are

not live.

• Before you operate the product, find out if there are

hidden wires, cables and pipes in the work area.

If the product hits a hidden object, stop the engine

immediately and examine the product and the object.

Do not start to operate the product again until you

know that it is safe to continue.

• Do not use the product in bad weather conditions,

such as thick fog, heavy rain, strong wind or intense

cold. To do work in bad weather makes you tired

and can cause dangerous conditions, for example

slippery surfaces.

• Make sure that you are in a safe and stable position

during operation.

• The product can cause objects to eject at high

speed. Make sure that all persons in the work

area use approved personal protective equipment.

Remove loose objects from the work area.

• The exhaust fumes from the engine contain carbon

monoxide which is an odourless, poisonous and

very dangerous gas. Do not use a combustion

engine product indoors or in areas that do not have

sufficient airflow.

• Before you go away from the product, stop the

engine and make sure that there is no risk of

accidental start.

• If the product has parking brakes, do not go

away from the product without the parking brakes

engaged.

• Do not go away from the product when the engine is

started.

• Be very careful during operation on slopes. The

product is heavy and can cause serious injury if it

falls.

• Make sure that no material can become loose and

cause injury to the operator.

• Make sure that clothes, long hair and jewelry do not

get caught in moving parts.

• Do not operate the product unless you can get aid if

an accident occurs.

• Keep the work area clean and bright.

• Do not use the product in areas where fire or

explosions can occur.

Exhaust fumes safety

WARNING: Read the warning

instructions that follow before you use the

product.

• Long-term inhalation of exhaust fumes can cause

health problems.

• The exhaust fumes from the engine contain carbon

monoxide which is an odourless, poisonous and very

dangerous gas. To breathe carbon monoxide can

cause death. Because carbon monoxide is odourless

and cannot be seen, it is not possible to sense it. A

symptom of carbon monoxide poisoning is dizziness,

but it is possible that a person becomes unconscious

without warning if the quantity or concentration of

carbon monoxide is sufficient.

• Exhaust fumes that you can see or smell also

contain carbon monoxide.

• Do not use a combustion engine product indoors

and/or in areas that do not have sufficient airflow.

Vibration safety

WARNING: Read the warning

instructions that follow before you use the

product.

• During operation of the product, vibrations go from

the product to the operator. Regular and frequent

operation of the product can cause or increase the

degree of injuries to the operator. Injuries can occur

in fingers, hands, wrists, arms, shoulders, and/or

nerves and blood supply or other body parts. The

injuries can be debilitating and/or permanent, and

can increase gradually during weeks, months or

years. Possible injuries include damage to the blood

circulation system, the nervous system, joints, and

other body structures.

• Symptoms can occur during operation of the product

or at other times. If you have symptoms and

continue to operate the product, the symptoms can

increase or become permanent. If these or other

symptoms occur, get medical aid:

• Numbness, loss of feeling, tingling, pricking,

pain, burning, throbbing, stiffness, clumsiness,

loss of strength, changes in skin color or

condition.

61919 - 002 - 23.01.2023

• Symptoms can increase in cold temperatures. Use

warm clothing and keep your hands warm and dry

when you operate the product in cold environments.

• Do maintenance on and operate the product as

given in the operator's manual, to keep a correct

vibration level.

• The product has a vibration damping system that

decreases the vibrations from the handles to the

operator. Let the product do the work.

• Keep your hands on the handle or handles only.

Keep all other body parts away from the product.

• Stop the product immediately if strong vibrations

suddenly occurs. Do not continue the operation

before the cause of the increased vibrations is

removed.

Noise safety

WARNING: Read the warning

instructions that follow before you use the

product.

• High noise levels and long-term exposure to noise

can cause noise-induced hearing loss.

• To keep the noise level to a minimum, do

maintenance on and operate the product as given

in the operator's manual.

• Examine the muffler for damages and defects. Make

sure that the muffler is correctly attached to the

product.

• Use approved hearing protection while you operate

the product.

• Listen for warning signals and voices when you use

hearing protection. Remove the hearing protection

when the product is stopped, unless hearing

protection is necessary for the noise level in the work

area.

Personal protective equipment

WARNING: Read the warning

instructions that follow before you use the

product.

• Always use approved personal protective equipment

when you operate the product. Personal protective

equipment cannot fully prevent injury but it

decreases the degree of injury if an accident does

occur. Let your dealer help you select the correct

personal protective equipment.

• Regularly do a check of the condition of the personal

protective equipment.

• Use an approved protective helmet.

• Use approved hearing protection.

• Use approved respiratory protection.

• Use approved eye protection with side protection.

There is a high risk of eye injury from thrown objects.

• Use protective gloves.

• Use boots with steel toe-cap and non-slip sole.

• Use approved work clothing or equivalent close-

fitting clothing that has long sleeves and long legs.

Fire extinguisher

• Keep a fire extinguisher near during operation.

• Use a powder fire extinguisher or a carbon dioxide

fire extinguisher.

Safety devices on the product

WARNING: Read the warning

instructions that follow before you use the

product.

• Do not use a product with defective safety devices.

• Do a check of the safety devices regularly. If

the safety devices are defective, speak to your

Husqvarna service agent.

• Do not make modifications to safety devices.

Machine stop button

The machine stop button (STOP) stops the engine.

CAUTION: Do not use the machine

stop button to stop the product unless there

is an emergency. For correct procedure how

to stop the product during operation, refer to

To stop the product on page 14

.

To do a check of the machine stop button

1. Make sure that the cutting blade is slightly above the

ground.

2. Make sure that the cutting blade and the blade

flange are tightly attached and the blade guard is

correctly installed. Refer to

To do a check of the

blade guard on page 8

.

1919 - 002 - 23.01.2023 7

3. Turn the machine stop button (STOP) clockwise to

make sure that it is disengaged.

4. Start the product.

5. Push the machine stop button (A) and make sure

that the engine stops.

A

B

6. Turn the machine stop button clockwise (B) to

disengage.

Blade guard

WARNING: Do not use the product

without a blade guard or with a defective

blade guard. Make sure that the blade guard

is installed and attached correctly before you

start the product.

The blade guard prevent parts, of the blade or the

material that is cut, to be thrown at the operator.

To do a check of the blade guard

• Make sure that the blade guard is correctly installed.

• Examine the blade guard for damages, such as

cracks.

• Replace a damaged blade guard.

• Replace the blade guard if it is hit, bent or has other

defects.

Drive belt cover

WARNING: Do not use the product

without a drive belt cover or with a defective

drive belt cover. Make sure that the drive

belt cover is installed and attached correctly

before you start the product.

The drive belt cover gives protection from the pulleys

and the drive belt.

To do a check of the drive belt cover

• Make sure that the drive belt cover is not damaged

or has cracks. Replace the drive belt cover if it is

necessary.

• Make sure that the 2 nuts of the drive belt cover are

installed and correctly tightened.

Muffler

The muffler keeps the noise levels to a minimum and

sends the exhaust fumes away from the operator.

Do not use the product if the muffler is missing or

defective. A defective muffler increases the noise level

and the risk of fire.

WARNING: The muffler gets very hot

during and after use. This also applies

during idling. Be aware of the fire hazard,

especially when working near flammable

substances and/or vapours.

To do a check of the muffler

WARNING: Do not use a product with

a defective muffler.

WARNING: The muffler becomes very

hot during and after operation, also at idle

speed. Use protective gloves to prevent burn

injuries.

• For information on how to do a check of the muffler,

refer to the operator's manual for the engine.

Fuel safety

WARNING: Read the warning

instructions that follow before you use the

product.

• Fuel is flammable and the fumes are explosive. Be

careful with fuel to prevent injury, fire and explosion.

• Do not breathe in the fuel fumes. The fuel fumes are

poisonous and can cause injury. Make sure that the

airflow is sufficient.

• Do not remove the fuel tank cap or fill the fuel tank

when the engine is on.

• Make sure that the engine is cool before you refuel.

• Do not fill fuel in an indoor area. Insufficient airflow

can cause injury or death because of asphyxiation or

carbon monoxide poisoning.

• Do not smoke near the fuel or the engine.

• Do not put hot objects near the fuel or the engine.

81919 - 002 - 23.01.2023

• Do not fill fuel near sparks or flames.

• Before you refuel, open the fuel tank cap slowly and

release the pressure carefully.

• Fuel on your skin can cause injury. If you get fuel on

your skin, use soap and water to remove the fuel.

• If you spill fuel on your clothing, change clothing

immediately.

• Do not fill the fuel tank fully. Heat causes the fuel to

expand. Keep a space at the top of the fuel tank.

• Tighten the fuel tank cap fully. If the fuel tank cap is

not tightened, there is a risk of fire.

• Before you start the product, move the product to a

minimum of 3 m/10 ft from where you refueled.

• Do not start the product if there is fuel or engine

oil on the product. Remove the unwanted fuel and

engine oil and let the product dry before you start the

engine.

• Examine the engine for leaks regularly. If there are

leaks in the fuel system, do not start the engine until

the leaks are repaired.

• Do not use your fingers to examine the engine for

leaks.

• Keep fuel in approved containers only.

• When the product and fuel is in storage, make sure

that fuel and fuel fumes cannot cause damage.

• Drain the fuel in an approved container outdoors and

away from sparks and flames.

Safety instructions for maintenance

WARNING: Read the warning

instructions that follow before you use the

product.

• Use personal protective equipment. Refer to

Personal protective equipment on page 7

.

• If the maintenance is not done correctly and

regularly, the risk of injury and damage to the

product increases.

• Stop the engine and let the product become cool

before you do the maintenance.

• Clean the product to remove dangerous material

before you do the maintenance.

• Disconnect the spark plug cap before you do the

maintenance.

• The exhaust fumes from the engine are hot and can

contain sparks. Do not operate the product in indoor

areas or near flammable material.

• Do not change the product. Modifications that

are not approved by the manufacturer, can cause

serious injury or death.

• Always use original accessories and spare parts.

Accessories and spare parts that are not approved

by the manufacturer, can cause serious injury or

death.

• Replace damaged, worn or broken parts.

• Only do the maintenance as given in this operator's

manual. Let an approved service center do all other

servicing.

• Remove all tools from the product before you start

the engine after maintenance. Loose tools or tools

attached to rotating parts can eject and cause injury.

• Let an approved service center do servicing on the

product regularly.

Operation

Introduction

WARNING: Read and understand the

safety chapter before you use the product.

To do before you operate the product

• Read the operator's manual carefully and make sure

that you understand the instructions.

• Read the instructions that are supplied with the

cutting blade by the cutting blade manufacturer.

• Read the operator's manual supplied by the engine

manufacturer.

• Before each operation of the product, do these

steps:

a) Do the daily maintenance. Refer to

Maintenance

schedule on page 14

.

b) Make line marks for all cuts. Prepare the

operation sequence carefully to prevent injury

and damage.

c) Make sure that the cutting blade is correctly

installed. Refer to

Maintenance on page 14

.

d) Adjust the handle to an applicable operation

position. Refer to

To adjust the handle height on

page 10

.

e) Fill the water tank or connect external water

supply to the water tap.

f) Make sure that the water tap is open. Each side

of the cutting blade must have sufficient supply of

water.

g) Make sure that the pointer is aligned with the

cutting blade. Refer to

To align the pointer with

the cutting blade on page 13

.

h) Turn the machine stop button clockwise to make

sure that the machine stop button is disengaged.

Cutting blades

WARNING: Do not use a cutting blade

for other materials than which it is made for.

1919 - 002 - 23.01.2023 9

WARNING: Only use diamond blades

for wet cutting. The diamond blade must be

applicable to the same speed or a higher

speed than the value given on the product

type plate. Only use diamond blades that

are in compliance with national or regional

standards, for example EN13236 or ANSI

B7.1.

The cutting blade manufacturer gives warnings and

recommendations for the operation and correct

maintenance of the cutting blade. Those warnings are

supplied with the cutting blade.

Diamond blades

WARNING: Make sure that the

direction of rotation for the diamond blade

shown on the diamond blade aligns with the

direction of rotation shown on the product.

CAUTION: Always use a sharp

diamond blade.

There is a wide range of diamond blades that is used

for different operations. From new made concrete to

concrete and asphalt that has become hard and for

different hardness classes.

Diamond blades has a steel core with segments that are

made of industrial diamonds.

Water cooling system

Always use water during operation to keep the

temperature of the diamond blades down. The water

cooling system also increases the lifetime of the

diamond blades and prevents dust buildup.

Make sure that the water supply is not clogged.

To sharpen the diamond blades

Diamond blades can become blunt if you use an

incorrect feeding pressure or when you cut materials

such as hard reinforced concrete. If you use a blunt

diamond blade it becomes too hot, which can cause the

diamond segments to come loose.

• Decrease the cutting depth and the engine speed

for a short time to sharpen the diamonds on the

diamond blade.

Diamond blades for wet cutting

WARNING: Always use a blade flange

dimension that is specified for the current

blade dimension. Do not use blade flanges

that are damaged.

During the operation, the friction causes the diamond

blade to become very hot. If the diamond blade

becomes too hot, it will decrease the blade tension or

make the core crack.

Let the diamond blade become cool before you touch it.

• Diamond blades for wet cutting must be used with

water to keep the diamond blade core and segments

cool during cutting. Diamond blades for wet cutting

can not be used dry.

• If you use diamond blades for wet cutting without

water, the diamond blade can become too hot. This

gives bad performance, blade damage and is a

safety risk.

To fill fuel

WARNING: Gasoline is very

flammable. Be careful and refuel outdoors.

Refer to

Fuel safety on page 8

.

CAUTION: Always use correct fuel

type. Incorrect fuel type causes damage to

the product.

• Use gasoline of the correct type. Refer to

Technical

data on page 18

. For more information about the

fuel, refer to the engine manual supplied by the

engine manufacturer.

To adjust the handle height

The height of the handle can be adjusted to the correct

height.

1. Loosen the levers (M).

2. Set the position for the necessary work height.

3. Tighten the levers (M).

10 1919 - 002 - 23.01.2023

To use the track widener

The track widener makes the product more stable.

1. Loosen the screw (A) for the track widener.

A

2. Pull the right rear wheel out until it stops.

3. Tighten the screw (A) for the track widener.

To install a cutting blade

1. Make sure that the engine ON/OFF switch is in its

OFF position.

2. Turn the cutting depth wheel clockwise to fully lift the

cutting blade. Push the lever to lock the cutting depth

wheel.

WARNING: Always lock the cutting

depth wheel when the cutting depth

wheel is not in use.

3. Stop the water supply and disconnect the water hose

from the blade guard.

4. Lift the pointer (A) to an upright position.

A

C

B

5. Loosen the front nut (B) on the blade guard.

6. Lift the blade guard (C).

7. Remove the blade screw (D).

DE

F

8. Remove the blade flange (E).

9. Examine the blade screw (D), the blade flange (E),

the inner flange (F) and the locking pin (G).

a) Clean all contact surfaces between the blade

and the blade flange. Clean the blade shaft bolt

threads and the contact surfaces of the blade

shaft bolt.

b) Replace worn or damaged parts.

WARNING: Damaged or dirty parts

can prevent correct installation of the

cutting blade.

1919 - 002 - 23.01.2023 11

10. Install the cutting blade on the inner flange (F).

E

D

F

G

11. Make sure that the cutting blade rotates in the

direction of the arrows shown on the cutting blade.

CAUTION: Risk of damage to the

cutting blade if it is installed opposite the

direction of rotation.

12. Install the blade flange (E) and the blade screw (D).

Make sure that the locking pin (G) on the inner

flange, goes through the cutting blade and into the

blade flange (E).

13. Hold and push the cutting blade in reverse direction

of rotation. At the same time tighten the blade screw

(D).

14. Turn the cutting depth wheel counterclockwise to

lower the cutting blade.

15. Tighten the blade screw (D) to minimum 40-45 Nm

with the supplied wrench. The resistance between

the cutting blade and the ground keeps the cutting

blade in position.

16. Lower the blade guard.

17. Start the product and listen for unusual sounds. If

there are unusual sounds, remove the cutting blade.

a) Examine the cutting blade for damages.

b) Install the cutting blade again. Replace the

cutting blade if it is damaged.

To remove or replace the cutting blade

WARNING: When you remove

diamond blades, let the product become

cool and use protective gloves. Diamond

blades are very hot after use.

1. Make sure that the engine ON/OFF switch is in its

OFF position.

2. Stop the water supply and disconnect the water hose

from the blade guard.

3. Do the steps in

To install a cutting blade on page 11

to remove or replace the cutting blade.

4. Before you operate the product again, start the water

supply and connect the water hose to the blade

guard.

To set the cutting depth indicator

WARNING: Always lock the cutting

depth wheel when the cutting depth wheel

is not in use.

1. Turn the cutting depth wheel until the cutting blade

slightly touches the ground. Push the lever to lock

the cutting depth wheel.

CAUTION: Do not lower the cutting

blade too quickly. If the cutting blade

hits the surface with force, it can cause

damage to the cutting blade.

12 1919 - 002 - 23.01.2023

2. Loosen the screw (A).

B

A

3. Rotate the indicator plate until the the position "0" is

at the center of the arrow (B).

4. Tighten the screw (A).

CAUTION: Always do a check that

the cutting depth is correct. The indicator

helps you to get the correct cutting depth

but only gives an indication of the depth

value.

To align the pointer with the cutting

blade

1. Lower the pointer and align the pointer with a line

mark.

2. Make sure that the pointer is aligned with the cutting

blade. If necessary, adjust the guide wheel on the

pointer until it is aligned with the cutting blade.

a) Loosen the nut for the guide wheel.

b) Align the guide wheel with the cutting blade.

c) Tighten the nut for the guide wheel.

To use the correct working technique

WARNING: The blade shaft rotates

when the engine is started.

• Stay away from the blade path while the engine

is on. The correct operator position is behind the

handles with both hands on the handles.

• Examine the cutting blade frequently for cracks and

broken parts during the work day. Do not use a

damaged cutting blade.

WARNING: Stop the engine before

you examine the cutting blade.

• Do not grind with the side of the cutting blade. The

cutting blade can break and cause injury to the

operator or bystanders. Only use the cutting edge.

• Do not bend or twist the cutting blade in the cut.

• Make sure that the cutting blade moves freely and

does not catch in the cut.

• If you are to cut concrete bricks, tightly attach the

concrete bricks before you cut. The heavy weight

of the material can cause damage to the product

and serious injury. Make sure that you can move the

product in controlled conditions.

To start the product

WARNING: Make sure that the cutting

blade is slightly above the ground.

• Refer to the operator's manual supplied by the

engine manufacturer.

1919 - 002 - 23.01.2023 13

To stop the operation

1. Turn the cutting depth wheel (K) clockwise to fully lift

the cutting blade.

2. Stop the water supply (G).

To stop the product

WARNING: If there is an emergency,

push the machine stop button to stop the

product quickly.

WARNING: The cutting blade rotates

for a while after the engine stops.

• Turn the engine ON/OFF switch to the OFF position.

Refer to the operator's manual supplied by the

engine manufacturer.

To operate the product

1. Slowly turn the cutting depth wheel counterclockwise

to lower the cutting blade.

2. Make a cut as a guide, approximately 20-30 mm.

3. Do cut increments of 50 mm until you get the

necessary depth. Push the lever up to lock the

cutting depth wheel.

4. Adjust the water supply when you operate the

product. Turn the water tap to adjust the water

supply.

CAUTION: Each side of the cutting

blade must have sufficient supply of

water to cool down the cutting blade.

The water also prevents dust buildup.

5. Cut only in a line, align the cutting blade with the

marks.

6. Slowly push the product forward and make sure that

the pointer and the cutting blade are aligned with the

marks.

CAUTION: Do not turn, rotate or

move the product from side to side while

the cutting blade rotates.

Maintenance

Introduction

WARNING: Read and understand the

safety chapter before you do maintenance

on the product.

For all servicing and repair work on the product, special

training is necessary. We guarantee that professional

repairs and servicing is available. If your dealer is not a

service agent, speak to them for information about the

nearest service agent.

For spare parts, speak to your Husqvarna dealer or

service agent.

To do before the maintenance

• Park the product on a level surface and stop the

engine. Turn the engine ON/OFF switch to the

OFF position to prevent accidental start during

maintenance.

• Clean the area around the product from oil and dirt.

Remove unwanted objects.

• Put clear signs around the maintenance area to give

a warning to bystanders that maintenance work is in

progress.

• Keep fire extinguishers, medical supplies and an

emergency phone near.

Maintenance schedule

For maintenace of the engine and engine parts, refer

to the operator's manual supplied by the engine

manufacturer.

14 1919 - 002 - 23.01.2023

Maintenance Daily Weekly

Clean the external surfaces of the product with water. Refer to

To clean the product on

page 15

.X

Clean the air filter. In dusty environments, clean the air filter more frequently. Refer to

To

clean and replace the air filter on page 16

.X

Do a general inspection. Refer to

To do a general inspection on page 15

. X

Do a check of the engine oil level. X

Do a check of the drive belt. If it is necessary, adjust the tension of the drive belt. Refer to

To adjust the tension of the drive belt on page 15

.X

Do a check of the machine stop button. Refer to

To do a check of the machine stop button

on page 7

.X

Do a check of the blade guards. Refer to

To do a check of the blade guard on page 8

. X

Do a check of the muffler. X

Do a check of the cutting blade. Refer to

To clean the product on page 15

. X

Lubricate the grease nipples for the cutting depth adjustment. Refer to

To lubricate the

product on page 16

.X

Do a check of the water flow. If the water flow is not sufficient, do a check of the water

supply holes in the blade guard. Remove unwanted material that causes a blockage to

the water supply holes.

X

To clean the product

WARNING: Use protective glasses.

When you clean the product, dirt and

harmful material can eject from the product.

CAUTION: A blocked air intake

decreases the performance of the product

and can cause the engine to become too

hot.

• Let the product become cool before you clean it.

• Do not clean electrical components with water.

• Use a weak cleaning agent. Put on protective gloves

to prevent skin irritation.

• Always clean all the equipment at the end of the

work day. Do not use a high-pressure washer to

clean the product.

• Remove blockage from all air openings.

• Clean all outlets, connections and cables with a dry

cloth.

• Remove unwanted material that causes a blockage

to the water supply holes in the blade guard.

• Clean around the fuel tank cap.

To do a general inspection

• Make sure that the nuts and screws on the product

are tightened.

• Make sure that the cables on the product are not in a

position where they can become damaged.

• Make sure that there are no fuel or oil leaks.

• Make sure that the seals for the fuel tank cap are not

damaged.

• Examine the fuel hose. Replace the fuel hose if it is

damaged or worn.

• Examine the water hoses for leakage. Do not

operate a product that has damaged water hoses.

To adjust the tension of the drive belt

1. Loosen the 2 nuts (S) and remove the drive belt

cover.

2. Make sure that the drive belt is not damaged.

1919 - 002 - 23.01.2023 15

3. Loosen the screws that keep the engine in position.

4. Turn the tension nuts ¼ (N) turn clockwise to

increase the tension of the drive belt.

CAUTION: Do not increase the

tension of the drive belt too much.

5. Make sure that the drive belt pulleys are aligned.

6. Tighten the screws that keep the engine in position.

7. Turn the tension nuts 2 turns counterclockwise to

prevent that the tension screw touches the engine

block.

8. Install the drive belt cover and tighten the 2 nuts.

To lubricate the product

Lubricate the components that follow. Lubricate until the

grease can be seen at the edges. For correct grease,

refer to

Technical data on page 18

.

1. Apply some grease to the grease nipples of the lever

for cutting depth adjustment.

2. Turn the cutting depth wheel clockwise and

counterclockwise again and again and lubricate

equally.

To do a check of the engine oil level

1. Make sure that the cutting blade is removed and that

the product is level when you examine the engine oil

level.

2. Remove the dipstick from the oil tank.

3. Clean the oil from the dipstick.

4. Put the dipstick back fully into the oil tank.

5. Remove the dipstick.

6. Examine the oil level on the dipstick. Make sure that

the level of engine oil is between the marks on the

dipstick.

7. If the oil level is low, fill with engine oil and do a

check of the oil level again. Refer to

Technical data

on page 18

for correct engine oil type.

To replace the engine oil

If the engine is cold, start the engine for 1–2 minutes

before you drain the engine oil. This makes the engine

oil warm and faster to drain.

WARNING: Do not operate the engine

for more than 1–2 minutes before you drain

the engine oil. The engine oil becomes very

hot and can cause burn injuries. Let the

engine become cool before you drain the

engine oil.

WARNING: If you spill engine oil on

your body, clean with soap and water.

CAUTION: Do not use engine oil for

2-stroke engines. Engine oil for 2-stroke

engines can cause damage to the engine.

• Refer to the operator's manual supplied by the

engine manufacturer.

CAUTION: Obey local regulations for

safe disposal of used engine oil.

To clean and replace the air filter

WARNING: Use approved respiratory

protection when you clean or replace the air

filter. Discard used air filters correctly. The

dust in the air filter is dangerous to your

health.

WARNING: Do not clean the air filter

with compressed air. This causes damage to

the air filter and the risk increases that you

breathe the dangerous dust.

CAUTION: Always replace a damaged

air filter, or the dust will go into the engine

and cause engine damage.

• For information on how to clean and replace the air

filter, refer to the operator's manual for the engine.

To examine the spark plug

Note: Do not use a spark plug with a

damaged spark plug cap or ignition lead.

A damaged spark plug can cause electrical

shock.

CAUTION: Always use the

recommended spark plug type. Incorrect

spark plug type can cause damage to the

product.

• Examine the spark plug if the engine is low on

power, is not easy to start or does not operate

correctly at idle speed.

• To decrease the risk of unwanted material on the

spark plug electrodes, obey these instructions:

a) Make sure that the fuel type is correct.

b) Make sure that the air filter is clean.

• If the spark plug is dirty, clean it and make sure that

the electrode gap is correct.

• Replace the spark plug if it is necessary.

• For more information, refer to the operator's manual

for the engine.

16 1919 - 002 - 23.01.2023

Transportation, storage and disposal

Transportation

WARNING: Be careful during

transportation. The product is heavy and can

cause injury or damage if it falls or moves

during transportation.

The wheels let you move the product manually for

shorter distances. For longer distances, lift the product

to move it or put the product on a vehicle.

CAUTION: Do not tow the product

behind a vehicle.

• Safety the product during transportation. Make sure

that it cannot move. Use the lifting eye or the base

plate of the product to attach it.

• Remove the cutting blade before transportation of

the product.

• Remove all tools and wrenches.

• For transportation of the product and fuel, make

sure that there are no leaks or fumes. Sparks or

open flames, for example from electrical devices or

boilers, can start a fire.

• Always use approved containers for transportation of

fuel.

• Examine new cutting blades for transport damage.

To lift the product

WARNING: Make sure that the lifting

equipment has the correct dimension. The

rating plate on the product shows the

product weight.

WARNING: Make sure that the lifting

eye is not damaged. Do not use metal

hooks, chains or other lifting equipment with

rough edges that can cause damage to the

lifting point.

WARNING: Do not walk or stay below

or near a lifted product.

• Use correct lifting equipment to lift the product. Do

not lift the product manually.

• Use the lifting eye that is attached to the product

when you lift it.

• Use boots with steel toe-caps and non-slip soles.

Storage

• Keep the product in a locked area to prevent access

for children or persons that are not approved.

• Always keep the product indoors.

• Keep the product in a dry and frost free area.

• Remove the cutting blade from the product after the

operation.

• Keep the cutting blades in a safe area to prevent

damage.

• Keep the cutting blades in a dry and frost-free area.

• Examine new cutting blades for storage damage.

• Keep the product on a flat, level surface.

• Remove all fuel from the fuel tank before you put the

product in storage for a long period of time. Discard

the fuel at an applicable disposal location.

• Always use approved containers for storage of fuel.

Disposal

• Obey the local recycling requirements and applicable

regulations.

• Discard all chemicals, such as engine oil or fuel, at a

service center or at an applicable disposal location.

• When the product is no longer in use, send it to

a Husqvarna dealer or discard it at a recycling

location.

1919 - 002 - 23.01.2023 17

Technical data

FS 305 FS 309

Engine 1Honda GX160 Honda GX270

Engine power, kW/hp@rpm23.6/4.8 6.3/8.4

Blade guard capacity, mm/in. 350/14 350/14

Max. cutting depth with blade size 350/14, mm/in. 125/5 125/5

Product weight with empty tanks, kg/lb 58/127 71/157

Operating weight, kg/lb 78/172 93/205

Dimensions (LxWxH), mm/in.3 41195/47 x 530/20.8 x

1010/39.7

1195/47 x 530/20.8 x

1010/39.7

Max. rotation speed of the spindle (at nominal engine speed 3800

rpm), rpm 2800 3400

Arbor size, mm/in. 25.4/1 25.4/1

Blade flange diameter, mm/in. 114/4.5 114/4.5

Blade coolant Water

Engine oil SAE 10W30, API

Class, MS, SD, SE or

higher

SAE 10W30, API

Class, MS, SD, SE or

higher

Oil tank capacity, l/qts 0.6/0.63 1.1/ 1.16

Fuel Unleaded gasoline with a maximum of 10%

ethanol.

Fuel tank capacity, l/qts 3.1/ 3.3 5.3/5.6

Grease NLGI 2, lithium based

Noise and vibration emissions FS 305 FS 309

Sound power level LWA (measured), dB (A) 106 110

Sound power level LWA (guaranteed), dB (A)5108 112

1For further information and questions about the specific engine, refer to the engine manual or the web site of

the engine manufacturer.

2As specified by engine manufacturer. Net power rating as per SAE J1349, at specified rpm.

3Dimensions refer to product without cutting accessories.

4Height can be adjusted at transport by lowering of the handle and by removing of the water tank.

5Noise emissions in the environment measured as sound power (LWA) in conformity with EC directive

2000/14/EC. The difference between guaranteed and measured sound power is that the guaranteed sound

power also includes dispersion in the measurement result and the variations between different machines of

the same model according to Directive 2000/14/EC.

18 1919 - 002 - 23.01.2023

Noise and vibration emissions FS 305 FS 309

Sound pressure level at the operators ear, dB (A) 6102 102

Vibration levels ahv, m/s2, right handle/left handle 74.4/4.7 4.9/3.7

Noise and vibration declaration

statement

These declared values were obtained by laboratory

type testing in accordance with the stated directive or

standards and are suitable for comparison with the

declared values of other products tested in accordance

with the same directive or standards. These declared

values are not suitable for use in risk assessments

and values measured in individual work places may

be higher. The actual exposure values and risk of

harm experienced by an individual user are unique and

depend upon the way the user works, in what material

the product is used, as well as upon the exposure time

and the physical condition of the user, and the condition

of the product.

6Noise pressure level according to EN 13862:2021. Reported data for noise pressure level has a typical

statistical dispersion (standard deviation) of 2.5 dB(A).

7Vibration level according to EN 13862:2021. Reported data for vibration level has a typical statistical disper-

sion (standard deviation) of 1.5 m/s2.

1919 - 002 - 23.01.2023 19

Declaration of Conformity

EU Declaration of Conformity

We, Husqvarna AB, SE-561 82 Huskvarna, SWEDEN,

tel: +46 36 146500, declare on our sole responsibility

that the product:

Description Floor cutting-off machine

Brand Husqvarna

Type/Model FS 305, FS 309

Identification Serial numbers dating from 2022 and onwards

complies fully with the following EU directives and

regulations:

Directive/Regulation Description

2006/42/EC "relating to machinery"

2014/30/EU "relating to electromagnetic compatibility"

2000/14/EC "relating to outdoor noise"

and that the following standards and/or technical

specifications are applied;

EN ISO 12100:2010

EN 13862:2001+A1:2009

EN 13862:2021

EN 55012:2008+A1:2009

EN ISO 14982:2009

Conformity assessment procedure acc 2000/14/EC:

Annex V.

For information relating to noise emissions, refer to the

chapter

Technical data on page 18

.

Partille, 2022-12-07

Fredrik Sandinge

R&D Director, Concrete Sawing & Drilling Equipment

Husqvarna AB, Construction Division

Responsible for technical documentation

20 1919 - 002 - 23.01.2023

Sidan laddas ...

Husqvarna FS 305 Användarmanual

Husqvarna FS 305 Användarmanual

på andra språk

Andra dokument