Grundig GKN 26845 FXBRN KOMBISKAP Bruksanvisning

varumärke: Grundig

Modell: GKN 26845 FXBRN KOMBISKAP

Kategori: Kylskåp

Typ: Bruksanvisning

GKNE268E40 FXN - GKNE268E40 FN - GKN 26845 FXBRN

GKNE 268E40 FXRN

EN / DA / SV / NO

58 4462 0000/AE

1/2

Refrigerator

User Manual

Køleskab

Brugervejledning

Kylskåp

Bruksanvisning

Kjøleskap

Bruksanvisning

GKNE268E40 FXN - GKNE268E40 FN - GKN 26845 FXBRN

GKNE 268E40 FXRN

Contents

1. Safety and environment

instructions 6

1.1. General safety .....................6

1.1.1 HC warning ..........................8

1.1.2 For models with water

dispenser ......................................8

1.2. Intended use........................8

1.3. Child safety ..........................8

1.4. Compliance with WEEE

Directive and Disposing of the

Waste Product ..............................9

1.5. Compliance with RoHS

Directive ........................................9

1.6. Package information...........9

2. Your Cooler/freezer 10

3. Installation 11

3.1 Appropriate installation

location .......................................11

3.2 Attaching the plastic

wedges ........................................12

3.3 Electrical connection ........12

4. Preparation 14

4.1 Things to be done for energy

saving ..........................................14

4.2 Initial use ...........................15

5. Operating the product 16

5.1 Indicator panel ..................16

5.2 Dual cooling system..........19

5.3 Freezing fresh food ...........19

5.4 Recommendations for

preserving the frozen food .........21

5.5 Placing the food ................21

5.6 Deep-freeze information .. 21

5.7 Changing the door opening

direction ......................................22

5.8 Open door warning ...........22

5.9 Recommendations for

freshfood compartment .............22

5.10 Illumination lamp ..............22

5.11 Humidity-controlled crisper

(Ever Fresh) ................................23

5.12 Vitamin Care Technology ..23

6. Maintenance and cleaning 24

6.1 Avoiding bad odours..........24

6.2 Protecting the plastic

surfaces ..................................... 25

7. Troubleshooting 26

FIN

Please read this manual first!

Dear Customer,

We hope that your product, which has been produced in modern plants

and checked under the most meticulous quality control procedures, will

provide you an effective service

For this, we recommend you to carefully read the entire manual of your

product before using it and keep it at hand for future references.

The user manual will help you use the product in a fast and safe way.

Will help you use your appliance in a fast and safe way.

Read the manual before installing and operating your product.

Follow the instructions, especially those for safety.

Keep the manual in an easily accessible place as you may need it later.

Besides, read also the other documents provided with your product.

Please note that this manual may be valid for other models as well.

Symbols and their descriptions

This instruction manual contains the following symbols:

CImportant information

or useful usage tips.

Warning against

dangerous conditions

for life and property.

BWarning against

electric voltage.

Packaging materials

of the product are

manufactured from

recyclable materials

in accordance with our

National Environment

Regulations.

SUPPLIER’S NAME MODEL IDENTIFIER (*)

INFORMATION

The model information as stored in the product data base

can be reached by entering following website and searching

for your model identiﬁer (*) found on energy label.

https://eprel.ec.europa.eu/

1. Safety and environment instructions

This section provides the safety

instructions necessary to

prevent the risk of injury and

material damage. Failure to

observe these instructions will

invalidate all types of product

warranty.

Intended use

WARNING:

Keep ventilation

openings, in the appliance

enclosure or in the built-

instructure, clear of

obstruction.

WARNING:

Do not use mechanical

devices or other means

to accelerate the

defrosting process,

other than those

recommended by the

manufacturer.

AWARNING:

Do not damage the

refrigerant circuit.

WARNING:

Do not use electrical

appliances inside

the food storage

compartments of the

appliance, unless

they are of the type

recommended by the

manufacturer.

This appliance is intended to be

used in household and similar

applications such as

– staff kitchen areas in shops,

offices and other working

environments;

– farm houses and by clients

in hotels, motels and other

residential type environments;

– bed and breakfast type

environments;

– catering and similar non-retail

applications.

1.1. General safety

• This product should not

be used by persons with

physical, sensory and mental

disabilities, without sufficient

knowledge and experience

or by children. The device

can only be used by such

persons under supervision

and instruction of a person

responsible for their safety.

Children should not be

allowed to play with this

device.

• In case of malfunction,

unplug the device.

• After unplugging, wait at

least 5 minutes before

plugging in again.

• Unplug the product when not

in use.

• Do not touch the plug with

wet hands! Do not pull the

cable to plug off, always hold

the plug.

• Do not plug in the refrigerator

if the socket is loose.

• Unplug the product during

installation, maintenance,

cleaning and repair.

• If the product will not be

used for a while, unplug the

product and remove any food

inside.

FIN

• Do not use the product when

the compartment with circuit

cards located on the upper

back part of the product

(electrical card box cover) (1)

is open.

• Do not use steam or steamed

cleaning materials for

cleaning the refrigerator and

melting the ice inside. Steam

may contact the electrified

areas and cause short circuit

or electric shock!

• Do not wash the product by

spraying or pouring water on

it! Danger of electric shock!

• In case of malfunction, do not

use the product, as it may

cause electric shock. Contact

the authorised service before

doing anything.

• Plug the product into an

earthed socket. Earthing

must be done by a qualified

electrician.

• If the product has LED

type lighting, contact the

authorised service for

replacing or in case of any

problem.

• Do not touch frozen food with

wet hands! It may adhere to

your hands!

• Do not place liquids in bottles

and cans into the freezer

compartment. They may

explode.

• Place liquids in upright

position after tightly closing

the lid.

• Do not spray flammable

substances near the product,

as it may burn or explode.

• Do not keep flammable

materials and products with

flammable gas (sprays, etc.)

in the refrigerator.

• Do not place containers

holding liquids on top of the

product. Splashing water on

an electrified part may cause

electric shock and risk of fire.

• Exposing the product to rain,

snow, sunlight and wind

will cause electrical danger.

When relocating the product,

do not pull by holding the

door handle. The handle may

come off.

• Take care to avoid trapping

any part of your hands or

body in any of the moving

parts inside the product.

• Do not step or lean on the

door, drawers and similar

parts of the refrigerator. This

will cause the product to fall

down and cause damage to

the parts.

• Take care not to trap the

power cable.

1.1.1 HC warning

If the product comprises a

cooling system using R600a

gas, take care to avoid

damaging the cooling system

and its pipe while using and

moving the product. This gas

is flammable. If the cooling

system is damaged, keep the

product away from sources

of fire and ventilate the room

immediately.

The label on the inner

left side indicates the

type of gas used in the

product.

1.1.2 For models with

water dispenser

• Pressure for cold water inlet

shall be maximum 90 psi (6.2

bar). If your water pressure

exceeds 80 psi (5.5 bar), use

a pressure limiting valve in

your mains system. If you

do not know how to check

your water pressure, ask for

the help of a professional

plumber.

• If there is risk of water

hammer effect in your

installation, always

use a water hammer

prevention equipment in

your installation. Consult

Professional plumbers if you

are not sure that there is no

water hammer effect in your

installation.

• Do not install on the hot

water inlet. Take precautions

against of the risk of

freezing of the hoses. Water

temperature operating

interval shall be 33°F (0.6°C)

minimum and 100°F (38°C)

maximum.

• Use drinking water only.

1.2. Intended use

• This product is designed for

home use. It is not intended

for commercial use.

• The product should be used

to store food and beverages

only.

• Do not keep sensitive

products requiring controlled

temperatures (vaccines,

heat sensitive medication,

medical supplies, etc.) in the

refrigerator.

• The manufacturer assumes

no responsibility for any

damage due to misuse or

mishandling.

• Original spare parts will

be provided for 10 years,

following the product

purchasing date.

1.3. Child safety

• Keep packaging materials

out of children’s reach.

• Do not allow the children to

play with the product.

FIN

• If the product’s door

comprises a lock, keep the

key out of children’s reach.

1.4. Compliance with WEEE

Directive and Disposing of the

Waste Product

This product complies with

EU WEEE Directive (2012/19/EU).

This product bears a classification

symbol for waste electrical and

electronic equipment (WEEE).

This product has been

manufactured with high

quality parts and

materials which can be

reused and are suitable

for recycling. Do not

dispose of the waste

product with normal domestic and

other wastes at the end of its

service life. Take it to the collection

center for the recycling of

electrical and electronic

equipment. Please consult your

local authorities to learn about

these collection centers.

1.5. Compliance with RoHS

Directive

• This product complies with EU

WEEE Directive (2011/65/EU).

It does not contain harmful and

prohibited materials specified in

the Directive.

1.6. Package information

Packaging materials of the product

are manufactured from recyclable

materials in accordance with our

National Environment Regulations.

Do not dispose of the packaging

materials together with the

domestic or other wastes. Take

them to the packaging material

collection points designated by the

local authorities.

Figures in this user manual are schematic and may not

match the product exactly. If the subject parts are not

included in the product you have purchased, then those parts

are valid for other models.

2. Your Cooler/freezer

*13

1. Adjustable door shelves

2. Indıcator Panel

3. Egg tray

4. Bottle shelf

5. Adjustable front feet

6. Freezer compartment

7. Freezer fan

8. Crisper

9. Chiller

10. Chiller cover and glass

11. Adjustable shelves

12. Wine cellar

13. Fan

FIN

3. Installation

Refer to the nearest Authorised

Service Agent for installation of

the product. To make the product

ready for use, make sure that

the electricity installation is

appropriate before calling the

Authorised Service Agent. If not,

call a qualified electrician to have

any necessary arrangements

carried out.

Preparation of the

location and electrical

installation at the place

of installation is under

customer's responsibility.

Product must not be

plugged in during

installation. Otherwise,

there is the risk of death

or serious injury!

WARNING: Installation

and electrical connections

of the product must

be carried out by the

Authorised Service Agent.

Manufacturer shall not be

held liable for damages

that may arise from

procedures carried out by

unauthorised persons.

WARNING: Prior to

installation, visually

check if the product has

any defects on it. If so,

do not have it installed.

Damaged products cause

risks for your safety.

Make sure that the power

cable is not pinched or

crushed while pushing

the product into its place

after installation or

cleaning procedures.

3.1 Appropriate

installation location

WARNING: If the door

of the room where the

product will be placed

is too small for the

product to pass, then the

product's doors must be

removed and the product

must be turned aside to

pass it through.

• Choose a place at where

you would use the product

comfortably.

• Install the product at least 30

cm away from heat sources

such as hobs, ovens, heater

cores and stoves and at least 5

cm away from electrical ovens.

Product must not be subjected

to direct sun light and kept in

humid places after installation.

• Appropriate air ventilation must

be provided around your product

in order to achieve an efficient

operation. If the product is to be

placed in a recess in the wall,

pay attention to leave at least 5

cm distance with the ceiling and

side walls.

• Do not place the product on

the materials such as rugs or

carpets.

• Place the product on an even

floor surface to prevent jolts.

• Your product can operate in

ambinet temperatures between

-5°C to +43°C.

If two coolers are to be

installed side by side,

there should be at least

4 cm distance between

them.

• Please provide at least 5 cm

distance for air circulation

between the back side of your

product and the wall to avoid

condensation on the rear panel

of product.

• Your product requires adequate

air circulation to function

efficiently. If the product will be

placed in an alcove, remember

to leave at least 5 cm clearance

between the product and the

ceiling, rear wall and the side

walls.

• If the product will be placed in

an alcove, remember to leave at

least 5 cm clearance between

the product and the ceiling,

rear wall and the side walls.

Check if the rear wall clearance

protection component is present

at its location (if provided with

the product). If the component

is not available, or if it is lost

or fallen, position the product

so that at least 5 cm clearance

shall be left between the rear

surface of the product and the

wall of the room. The clearance

at the rear is important for

efficient operation of the

product.

3.2 Attaching the

plastic wedges

Use the plastic wedges in the

provided with the product to

provide sufficient space for air

circulation between the product

and the wall.

1. To attach the wedges,

remove the screws on

the product and use the

screws provided with the

wedges.

2. Attach 2 plastic wedges

on the ventilation cover as

shown in the figure.

3.3 Electrical connection

Connect the product to a grounded

outlet protected by a fuse

complying with the values in the

rating plate. Our company shall

not be liable for any damages that

will arise when the product is used

without grounding in accordance

with the local regulations.

• Electrical connection

must comply with national

regulations.

• Power cable plug must be within

easy reach after installation.

• The voltage and allowed fuse or

breaker protection are specified

in the Rating Plate which is

affixed to interior of the product.

FIN

If the current value of the fuse

or breaker in the house does

not comply with the value in the

rating plate, have a qualified

electrician install a suitable

fuse.

• The specified voltage must be

equal to your mains voltage.

• Do not make connections via

extension cables or multi-plugs.

WARNING: Damaged

power cable must

be replaced by the

Authorised Service

Agents.

WARNING: If the

product has a failure, it

should not be operated

unless it is repaired by

the Authorised Service

Agent! There is the risk of

electric shock!

Hot Surface Warning!

Side walls of your product

is equipped with refrigerant

pipes to improve the

cooling system. Refrigerant

with high temperatures

may flow through these

areas, resulting in hot

surfaces on the side walls.

This is normal and does

not need any servicing.

Please pay attention while

touching these areas.

4. Preparation

4.1 Things to be done

for energy saving

Connecting the product

to electric energy saving

systems is risky as it may

cause damage on the

product.

• For a freestanding appliance;

‘this refrigerating appliance is

not intended to be used as a

built-in appliance.

• Do not leave the doors of

your refrigerator open for a

long time. When doors are

open,warm air enters the

fridge/freezer cabinets and

the appliance consumes

more energy to cool down the

foodstuffs.

• Do not put hot food or drinks in

your refrigerator.

• Do not overload the refrigerator.

Cooling capacity will fall when

the air circulation inside is

hindered.

• Do not place the refrigerator in

places subject to direct sunlight.

Install the product at least 30

cm away from heat sources

such as hobs, ovens, heater

cores and stoves and at least 5

cm away from electrical ovens.

• Pay attention to store your

food in refrigerator in closed

containers.

• The baskets/drawers that

are provided with the chill

compartment must always be in

use for low energy consumption

and for better storage

conditions.

• Food contact with the

temperature sensor in the

freezer compartment may

increase energy consumption of

the appliance. Thus any contact

with the sensor(s) must be

avoided.

• You can load maximum

amount of food to the freezer

compartment of the refrigerator

by removing the freezer

compartment drawers. Declared

energy consumption value of

the refrigerator was determined

with the freezer compartment

drawers and top compartment

flap removed and given wire

shelf is used at the bottom

of the freezer compartment

for maximum amount of food

loaded. Drawers can be used

for food storage when needed,

which may be more comfortable

depending on the shape and

size of the food.

• Thawing frozen food in fridge

compartment will both provide

energy saving and preserve the

food quality.

• Do not block the freezer fan grill

by placing foods in front.

FIN

CThe ambient

temperature of the

room where you

install the refrigerator

should at least be

-5°C. Operating your

refrigerator at colder

conditions than -5°C is

not recommended.

CInside of your

refrigerator must be

cleaned thoroughly.

CIf two coolers are to be

installed side by side,

there should be at least

4 cm distance between

them.

• Since hot and humid air will

not directly penetrate into your

product when the doors are

not opened, your product will

optimize itself in conditions

sufficient to protect your food.

Functions and components

such as compressor, fan, heater,

defrost, lighting, display and

so on will operate according

to the needs to consume

minimum energy under these

circumstances.

4.2 Initial use

Before starting to use the product,

check that all preparations are

made in accordance with the

instructions in sections “Important

instructions for safety and

environment” and “Installation”.

• Clean the interior of the

refrigerator as recommended in

the “Maintenance and cleaning”

section. Check that inside of it is

dry before operating it.

• Plug the refrigerator into the

grounded wall outlet. When

the door is opened the interior

illumination will turn on.

• Run the refrigerator without

putting any food for 6 hours

and do not open its door unless

certainly required.

CYou will hear a noise

when the compressor

starts up. The liquids and

gases sealed within the

refrigeration system may

also give rise to noise,

even if the compressor

is not running and this is

quite normal.

CFront edges of the

refrigerator may feel

warm. This is normal.

These areas are designed

to be warm to avoid

condensation.

CSuch loading will

result in higher energy

consumption and

worsen freezer storage

performance of your

appliance.

16 C

Figures in this user manual are schematic and may not

match the product exactly. If the subject parts are not

included in the product you have purchased, then those parts

are valid for other models.

5. Operating the product

5.1 Indicator panel

Indicator panel allows you to set the temperature and control the other

functions related to the product without opening the door of the product.

Just press the inscriptions on relevant buttons for function settings.

*1 2

568*7.1

*7.2

910 4

1. Economy

This symbol is illuminated when

the freezer compartment is set to

-18°C'ye as the most economical

setting value

( ). Economy indicator is turned

off when quick cooling or quick

freeze functions are selected.

2. Power failure/High

temperature / Power Cut Indicator

This indicator ( ) illuminates

during power failure, high

temperature failures and error

warnings. During sustained power

failures, the highest temperature

that the freezer compartment

reaches will flash on the digital

display.

After checking the food located in

the freezer compartment

() press the alarm off button to

clear the warning.

3. Energy saving function (display

off)

If the product doors are kept

closed for a long time energy

saving function is automatically

activated and energy saving symbol

is illuminated.When energy saving

function is activated, all symbols

on the display other than energy

saving symbol will turn off.

FIN

When the Energy Saving function is

activated, if any button is pressed

or the door is opened, energy

saving function will be canceled

and the symbols on display will

return to normal.

4. Quick cool

Quick cooling indicator

() is illuminated when quick

cooling function is activated and

fridge compartment temperature

indicator value is displayed as

1. To cancel this function press

Quick cooling button again. Quick

cooling indicator will turn off

and refrigerator will return to its

normal settings. Quick cooling

function is canceled automatically

in 1 hour if you do not cancel it

before. If you want to cool large

amounts of fresh food, press

the Quick cooling button before

putting the food into the fridge

compartment.

5. Vacation function

Vacation function can be activated

for both fridge and freezer

compartments separately. In order

to activate vacation function for

fridge compartment, press the

button no. (4) for 3 seconds, and

the vacation mode indicator blinks.

Then press no. (6) and the vacation

mode indicator for fridge activates.

When the vacation function is

activated, “- -” is displayed for

fridge compartment temperature

indicator and no active cooling

is performed on the fridge

compartment. It is not suitable

to keep the food in the fridge

compartment when this function

is activated. Other compartments

shall be continued to be cooled

as per their set temperature.To

cancel this function press either

Vacation function button again or

button no. (6)

Similarly, vacation function for

freezer compartment can be

activated by pressing the button

no. (4) for 3 seconds, and after

the vacation mode indicator

blinks, then press no. (10) and

the vacation mode indicator

for freezer activates. When the

vacation function is activated,

“- -” is displayed on the freezer

compartment temperature

indicator and no active cooling

is performed on the freezer

compartment. It is not suitable

to keep the food in the freezer

compartment when this function

is activated. Other compartments

shall be continued to be cooled

as per their set temperature. To

cancel this function press no. (10)

6. Fridge compartment

temperature setting

When the button no. (5) is pressed,

you may set the temperature of the

fridge compartment to 8,7,6,5,4,3,2

and 1 respectively ( ).

7.1. Energy saving function (disp-

lay off):

Energy saving symbol ( ) is

illuminated and Energy saving

function is activated when you

press this button ( ). When energy

saving function is activated, all

symbols on the display other than

energy saving symbol will turn off.

When the Energy Saving function is

activated, if any button is pressed

or the door is opened, energy

saving function will be canceled

and the symbols on display will

return to normal. Energy saving

symbol is turned off and energy

saving function is deactivated when

you press this button ( ) again.

7.2.Alarm off warning:

In case of power failure/high

temperature alarm, after checking

the food located in the freezer

compartment press the alarm off

button to clear the warning.

8. Key lock

Press key lock button ( )

simultaneously for 3 seconds. Key

lock symbol ( ) will light up and

key lock mode will be activated.

Buttons will not function if the

Key lock mode is active. Press key

lock button simultaneously for 3

seconds again. Key lock symbol

will turn off and the key lock mode

will be exited.Press the key lock

button if you want to prevent

changing of the temperature

setting of the refrigerator ( ).

9. Eco fuzzy

Press and hold eco fuzzy button

for 1 seconds to activate eco fuzzy

function. Refrigerator will start

operating in the most economic

mode at least 6 hours later and the

economic usage indicator will turn

on when the function is active

( ). Press and hold eco fuzzy

function button for 3 seconds to

deactivate eco fuzzy function.

This indicator is illuminated after 6

hours when eco fuzzy is activated.

10. Freezer compartment tempe-

rature setting

Temperature setting for freezer

compartment is performed here.

When button no. 9 is pressed,

you may set the temperature of

the freezer compartment to -18,

-19, -20, -21, -22, -23 and -24

respectively.

11. Fast freeze

Press button no. (10) for fast

freeze operation, quick freeze

indicator ( ) shall be activated.

Quick freeze indicator is

illuminated when quick freeze

function is activated and fridge

compartment temperature

indicator is displayed as -27. To

cancel this function press quick

freeze button ( ) again.

Quick freeze indicator will turn

off and refrigerator will return to

its normal settings. Quick freeze

function is canceled automatically

in 24 hour if you do not cancel it

before. If you want to freeze large

amounts of fresh food, press

the quick freeze button before

putting the food into the freezer

compartment.

FIN

5.2 Dual cooling system

Your cooler/freezer is equipped

with three separate cooling

systems to cool the fresh food

compartment, frozen food

compartment and multi zone

compartment. Thus, air and odour

in the fresh food compartment

and frozen food compartment do

not get mixed. Thanks to these

two separate cooling systems,

cooling speed is much higher

then other cooler/freezers. Also

additional power saving is provided

since the defrosting is performed

individually.

5.3 Freezing fresh food

• Wrap the food or place them in a

covered container before putting

them in the cooler/freezer.

• Hot food and beverages

must cool down to the room

temperature before putting

them in the cooler/freezer.

• The food that you want to freeze

must be fresh and in good

quality.

• Divided the food into portions

according to your family’s daily

or meal based consumption

needs.

• Pack the food in an airtight

manner to prevent them from

drying even if they are going to

be stored for a short time.

• Materials to be used for

packaging must be tear-proof

and resistant to cold, humidity,

odour, oils and acids and they

must also be airtight. Moreover,

they must be well closed and

they must be made from easy-

to-use materials that are

suitable for deep-freezers.

• Take special care not to mix

already frozen food and fresh

food.(They should not to be

allowed to come in contact with

the previously frozen items to

prevent their partial thawing.)

• Frozen food must be used

immediately after they are

thawed and they should never

be re-frozen.

• Do not freeze too large

quantities of food at one time.

The quality of the food is best

preserved when it is frozen right

through to the core as quickly as

possible.

• Placing warm food into the

freezer compartment causes

the cooling system to operate

continuously until the food is

frozen solid.

• Maximum frozen food storage

volume is achieved without

using the drawers and the

upper shelf cover provided

in the freezer compartment.

Energy consumption of your

appliance is declared while the

freezer compartment is fully

loaded on shelves without the

use of the drawers and upper

shelf cover. Use the given

wire shelf at the bottom of

the freezer compartment for

a better energy consumption

performance.

• It is recommended that you

place foodstuffs on top shelf of

freezer for initial freezing.

wire shelf

Freezer

Compartment

Setting

Fridge

Compartment

Setting

Explanations

-18°C 4°C This is the normal recommended

setting.

-20, -24 or

-24°C 4°C

These settings are recommended

when the ambient temperature

exceeds 30°C.

Quick Freeze 4°C

Use when you wish to freeze your

food in a short time. Your cooler/

freezer will return to its previous

mode when the process is over.

-18°C or colder 2°C

Use these settings if you think that

your fridge compartment is not

cold enough because of the hot

ambient conditions or frequent

opening and closing of the door.

-18°C or colder Quick Fridge

Use this function when you

place too much into the fridge

compartment or when you need

to cool your food quickly. It is

recommended that you activate

Quick Fridge function 4-8 hours

before placing the food.

FIN

5.4 Recommendations for

preserving the frozen food

• Frozen food that you have

purchased should be stored in

accordance with the frozen food

manufacturer's instructions for

( 4 star) frozen food storage

compartment.

• Note the following to ensure

that the high quality achieved by

the frozen food manufacturer

and the food retailer is

maintained:

1. Put packets in the freezer

as quickly as possible after

purchase.

2. Make sure that contents of

the package are labelled

and dated.

3. Check whether the "Use

By" and "Best Before" da-

tes on the packaging are

exceed or not.

5.5 Placing the food

Freezer

compartment

shelves

Various frozen

food such as

meat, fish,

ice cream,

vegetables and

etc.

Egg holder Egg

Fridge

compartment

shelves

Food in pans,

covered plates

and closed

containers

Fridge

compartment

door shelves

Small and

packaged food

or beverage

(such as milk,

fruit juice, beer

and etc.)

Crisper Vegetables and

fruits

Fresh zone

compartment

Delicatessen

products

(cheese, butter,

salami and etc.)

5.6 Deep-freeze information

Food must be frozen as rapidly

as possible when they are put in

a cooler/freezer in order to keep

them in good quality.

It is possible to preserve the food

for a long time only at -18°C or

lower temperatures.

You can keep the freshness of

food for many months (at -18°C or

lower temperatures in the deep

freeze).

CDivided the food into

portions according to

your family’s daily or

meal based consumption

needs.

CPack the food in an

airtight manner to prevent

them from drying even if

they are going to be stored

for a short time.

• Materials necessary for

packaging:

• Cold resistant adhesive tape

• Self adhesive label

• Rubber rings

• Pen

Sidan laddas ...

Grundig GKN 26845 FXBRN KOMBISKAP Bruksanvisning

varumärke: Grundig

Modell: GKN 26845 FXBRN KOMBISKAP

Kategori: Kylskåp

Typ: Bruksanvisning

Ladda ner pdf

Rapportera

på andra språk

English: Grundig GKN 26845 FXBRN KOMBISKAP Owner's manual
dansk: Grundig GKN 26845 FXBRN KOMBISKAP Brugervejledning

Grundig GKN 26845 FXBRN KOMBISKAP Bruksanvisning

Grundig GKN 26845 FXBRN KOMBISKAP Bruksanvisning

på andra språk

Relaterade papper

Andra dokument