Motorola TETRA MTM800 Basic User's Manual

MTM800

TETRA Motorcycle Terminal

Basic User Guide

When printed by Motorola

12

3

4

5

7

8

9

10

11

12

13

19

18

17

16

15

14

20

21

1

English

Contents

Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Disposal Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Copyright Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Icon Conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

MTM800 Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Controls and Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Audio Signal Tones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Periodic Alert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Key and Button Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Mode Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Menu Key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Emergency Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Function Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

The LED Status Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

To Enter the Menu Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

To Exit the Menu Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

List of Menu Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

The Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Display Icons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Displaying Long Numbers or Messages . . . . . . . . . . . . . . 15

Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Powering the MTM800 On/Off (On/Off Button) . . . . . . . . . . . . . 16

Powering On the MTM800 (Ignition Sense) . . . . . . . . . . . . . . . 16

Powering On the MTM800 (Ext. Emergency Switch) . . . . . . . . 16

Powering On with Transmit Inhibit Active . . . . . . . . . . . . . . . . . 16

Uninstalling the Radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Unlocking the MTM800 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Selecting TMO or DMO Operation . . . . . . . . . . . . . . . . . 18

Entering TMO or DMO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Calls (Trunked Mode Operation) . . . . . . . . . . . . . . . . . . . . . . . . 18

2

English

TMO Group Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Making a TMO Group Call . . . . . . . . . . . . . . . . . . . . . . . . 18

Receiving a TMO Group Call . . . . . . . . . . . . . . . . . . . . . . 19

Receiving a TMO Broadcast Call . . . . . . . . . . . . . . . . . . . 19

Calls (Direct Mode Operation) . . . . . . . . . . . . . . . . . . . . . . . . . . 19

DMO Group Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Making a DMO Group Call . . . . . . . . . . . . . . . . . . . . . . . . 20

Receiving a DMO Group Call . . . . . . . . . . . . . . . . . . . . . . 20

Exiting DMO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Calls (Private and Phone Calls) . . . . . . . . . . . . . . . . . . . 21

Private Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Making a Private Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Receiving a Private Call . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Phone and PABX Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Making a Phone or PABX Call . . . . . . . . . . . . . . . . . . . . . 22

VOX Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Emergency Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Entering or Exiting Emergency Mode (TMO & DMO) . . . . . . . . 23

Invisible Emergency Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Sending an Emergency Alarm . . . . . . . . . . . . . . . . . . . . . . . . . 23

Hot Microphone Feature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Making an Emergency Group Call . . . . . . . . . . . . . . . . . . . . . . 25

Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Sending a Status Message . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Sending a New Message . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Sending a User-defined Message . . . . . . . . . . . . . . . . . . . . . . . 26

Sending a Predefined Message . . . . . . . . . . . . . . . . . . . . . . . . 26

Handling New Incoming Text Messages . . . . . . . . . . . . . . . . . . 26

Handling Old Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Quick Reference Guide . . . . . . . . . . . . . . . . . . . . . . . . . . 27

MOTOROLA and the stylized M Logo are registered in the U.S.

Patent and Trademark Office. All other product or service names

are the property of their respective owners.

3

English

Safety Information

The accessories are restricted to occupational use only to satisfy

ICNIRP RF energy exposure requirements. Before using the

products, read the RF energy awareness information and operating

instructions in the Product Safety and RF Exposure booklet

(Motorola Publication part number Safety Leaflet 6866537D37) to

ensure compliance with RF energy exposure limits.

Keep this User Guide and the Product Safety and RF Exposure

booklet in a safe place and make it available to other operators in

case the accessories are passed on to other people.

Disposal Information

The European Union's Waste of Electrical and Electronic

Equipment directive requires that products sold into EU

countries must have the crossed out trashbin label on the

product (or the package in some cases). As defined by the

WEEE directive, this cross-out trashbin label means that customers

and end-users in EU countries should not dispose of electronic and

electrical equipment or accessories in household waste.

Customers or end-users in EU countries should contact their local

equipment supplier representative or service centre for information

about the waste collection system in their country.

Copyright Information

The Motorola products described in this manual may include

copyrighted Motorola computer programs stored in semiconductor

memories or other mediums. Laws in the United States and other

countries preserve for Motorola certain exclusive rights for

copyrighted computer programs, but not limited to, including the

exclusive right to copy or reproduce in any form the copyrighted

computer program.

Before using these products, read the

operating instructions for safe usage

contained in the Product Safety and RF

Exposure booklet Safety Leaflet

6866537D37.

4

English

Accordingly, any copyrighted Motorola computer programs contained

in the Motorola products described in this manual may not be copied,

reproduced, modified, reverse-engineered, or distributed in any

manner without the express written permission of Motorola.

Furthermore, the purchase of Motorola products shall not be deemed

to grant either directly or by implication, estoppel, or otherwise, any

licence under the copyrights, patents, or patent applications of

Motorola, except for the normal non-exclusive licence to use that

arises by operation of the law in the sale of a product.

This document is copyright protected. Duplications for the purpose of

the use of Motorola products are permitted to an appropriate extent.

Duplications for other purposes, changes, additions or other

processing of this document are not permitted. Only this

electronically-saved document is considered to be the original.

Duplications are considered merely copies. The group companies of

Motorola, Inc. do not vouch for the correctness of such kinds of

copies.

Icon Conventions

The document set is designed to give the reader more visual cues.

The following graphic icons are used throughout the documentation

set. These icons and their associated meanings are described

below.

The signal word Warning with the associated

safety icon implies information that, if

disregarded, could result in death or serious

injury, or serious product damage.

The signal word Caution with the associated

safety icon implies information that, if

disregarded, may result in minor or moderate

injury, or serious product damage.

The signal word Caution may be used without the safety

icon to state potential damage or injury that is not related to

the product.

Notes contain information more important than the surrounding

text, such as exceptions or preconditions. They also refer the

reader elsewhere for additional information, remind the reader how

to complete an action (when it’s not part of the current procedure,

for instance), or tell the reader where something is located on the

screen. There is no warning level associated with a Note.

5

English

MTM800 Overview

Controls and Indicators

The numbers below refer to the illustration on the inside front cover.

Number Description

1 On-Off Key

Used to turn the MTM800 On/Off (press and hold).

2 LED (Indicator)

3 Navigation Keys

Press left or right for list scrolling while moving

around the menu hierarchy or for alphanumeric text

editing.

4 Display Arrows

Indicate the present mode.

5 Alphanumeric Display

Provides two lines of 14 characters with backlighting.

7 Alphanumeric Keypad

Use the keypad to enter alphanumeric characters for

dialing, address book entries and text messages.

8 Menu Key

Used to enter the main menu and scroll the menu

options.

9 Select Key

10 Cancel Key

11 Emergency Key

Used to send Emergency Alarms (press and hold).

12 Backlight Key

Dims and intensifies the terminal’s backlight.

13 External Alarm Key

Used to activate and deactivate the External Alarm

(Horn & Lights).

14 Message Mail Key

Selects the Message Mail mode of operation.

15 Status Mode Key.

Selects the Send Status mode of operation.

6

English

Audio Signal Tones

= High Tone; = Low Tone;

16 Direct Mode Key

Enters/Exits Direct Mode Operation.

17 Phone Mode Key

Selects the Phone/PABX Call modes of operation.

18 Private Mode Key

Selects the Private Call mode of operation.

19 Group Call Key

Selects the Group Call mode of operation.

20 Range Key

Selects the talkgroup range or DMO gateway.

21 Volume Knob

Adjusts the volume level.

Push-To-Talk (PTT) Button

Press and hold this button to talk, release it to listen.

Before using your MTM800 for the first time, remove the plastic

lens protector from the display.

Description Type Repeated

Idle

• Back to Home display

• Back to rotary volume

use when rotary scroll

timer expires

• Back to coverage

• Back to full service

Once

Clear-to-send Once

Bad key press Once

• Good key press

• MTM800 self-test fails at

power up

• From out-of-service to

in-service

Once

Number Description

7

English

In Call

Call clear warning Once

Call waiting tone while

Phone or Private Call are

pending.

Every 6 seconds, until

a call is terminated.

Data connected or

Data disconnected

Once

Talk Permit sounds upon

pressing the PTT.

Once (Normal Tone)

Once (Short Tone)

Talk permit without

gateway sounds upon

pressing PTT. The tone

indicates the gateway is no

longer available.

Twice

Once

• Talk prohibit

• System busy

• Time-out timer expire

• Called MTM800 not

available or busy

Until you release the

PTT.

Call disconnected or

failed due to network

Once

Wrong number dialed

No tone

DMO (Direct Mode)

Entering

Once

DMO Exiting Once

Local site trunking —

Entering/Exiting

Once

Phone ring back (sending) Every three seconds,

until the called user

answers or call is

rejected.

Phone busy Every 0.5 seconds

Status message sent to the

dispatcher or failed.

Twice

Description Type Repeated

8

English

Incoming Calls

Status message

acknowledged by the

dispatcher.

Four times

Your MTM800 received a

Group Call without

gateway (setup only).

Once

High-priority Group Call

received

Once

Emergency Alarm sent or

received

Twice

Emergency Alarm failed Four times

Emergency Call received Once

Phone ring, full-duplex

Private Call (reception)

According to the Ring Style

sub-menu setting.

Until you answer or

the call is rejected.

Private Call received According to the Ring Style

sub-menu setting.

Until you answer or

the call is rejected.

Private Call ringing to the

caller

Until the call is

answered.

Half-duplex Private

Pre-emptive Priority Call

(PPC) ring

Every 4 seconds, until

the call is answered or

rejected.

Full-duplex Private PPC

ring

Every 4 seconds, until

the call is answered or

rejected.

Limited service Once, upon entering

limited service.

New mail received Once

New Group Call Once

General

Volume setting (earpiece,

keypad, speaker)

Continuous

Volume setting (ringer) While setting the

volume.

Transmit Inhibit (TXI)

Once

Description Type Repeated

9

English

Periodic Alert

This feature can be disabled/enabled by the user.

Press - 4 Setup - 1 Tones - 5 Periodic Alert also to set the

period of time between the indications.

Key and Button Overview

Mode Keys

The MTM800 has four call modes when operating in Trunked Mode

(TMO):

• Group mode — to send and receive Group Calls: Press

• Private mode — to send and receive Private Calls: Press

• Phone mode — to send and receive Phone Calls: Press 1

• PABX mode — to send and receive local (office) extension calls:

Press 2

Group mode is the default mode to which your MTM800 returns

when there is no activity for a few seconds.

Menu Key

Press to enter the menu. The MTM800 menus allow you to

control your MTM800 settings.

Emergency Button

Press and hold from any mode to enter the Emergency mode.

Function Keys

Numeric Keys

The MTM800 supports the one-touch feature that allows you to

select or activate commonly used features by pressing and holding

a numeric key.

The required time you need to press the Emergency button is set

as default to 2 seconds. This time may be set, however, by your

service provider.

10

English

One Touch Private Call

The MTM800 supports the one-touch private call if it is set by the

Service Provider. User can dial the last group call originator number

via pressing the assigned button.

List of Available Characters:

The required time you need to press the Numeric keys to activate a

one-touch function is set as default to 1 second. This time may be

set, however, by your service provider.

For information on the function assigned to each Numeric keys

please refer to your service provider.

Key Alphanumeric Mode

. , ? ! 0 1 @ ' " - ( ) / : _ ; + & % × * = < > € £ $ ¥ ¤ [ ]

{ } \ ~ ^ ¿ ¡ § #

1

2

ABC

abc

2

3

DEF

de f

3

4

GHI

GH I

gh i

4

5

JKL

JK L5

jk l5

6

MNO

mno

6

7

PQRS

pqr s

7

8

TUV

tuv

8

9

WXYZ

W

XYZ

w

xyz

9

*Space / %

0

0-+

#

<#= >

11

English

The LED Status Indicator

The LED indicator shows the states of your MTM800.

To Enter the Menu Options

1. From any mode, press .

2. Scroll to the required option, press to select.

3. Alternatively, key the numbers of the required option,

typically 2 2 4 to reach 4 Mem Usage.

To Exit the Menu Options

Press .

Indicator Status

Solid green In use

Flashing green In service

Solid red Out of service

Flashing red Connecting to a network/Entering DMO

Solid orange Transmit Inhibit (TXI) in service /

Channel busy in DMO

First solid then

flashing orange

Incoming call

No indication Switched off

Your MTM800 may exit if no key presses are detected for

a time-out period.

12

English

List of Menu Options

1 Manual

2Semi-auto

3Auto

4 Disablef

1Voice Only

2Data Only

3Voice & Data

1Keylock

2 PIN Protect

3 Change Code

4Air Encrypt

5 K Validity

6 TMSCK Validity

7DMSCK Validity

8DMO SCK

9 Covert Mode

1No Tone

2Short Tone

3 Normal Tone

1Alert

2Period

1On

2Off

1On

2Off

<9 Styles>

1On

2Off

1On

2Off

1 Add TMO

2 Add DMO

4 Remove Grp

5 Remove All

1 Duplex

2 Simplex

1New

2 Templates

3 Predefined

1 Send Sts

2 Inbox

3 Send Msg

1Private

2 Phone

3 PABX

1 Select

2View

3 Add Group

4Setup

3Data Setup

2 Addr. Book

1 Messages

1 Add ID / Add Phone / Add Ext

2 abc Order

3 By LocatÕn

4 Mem Usage

4 My Groups

1 Tones

2 Language

4 Backlight

1Ring Style

2 Keypad Tones

3 All Tones

4Talk Permit

5 Periodic Alert

3 Security

1English

2 Deutsch

3 Français

4 Español

5 Nederlands

6 Svenska

7 Русский

8 <User Defined>

See next page

13

English

List of Menu Options (Cont’d)

Some menu numbers may be different than the listed as some

menu options can be enabled/disabled by your Service Provider.

1Sent

2 Received

3 Bandwidth

4 Encryption

1On

2Off

1Position

2Interface

1 Add Group

2View List

3 Edit List

4 Rename

5 Clear List

1On

2Off

1Activate

2 Deactivate

1 Home Only

2Select Net

1 Trunk Mode

2 Direct Mode

2Packet Data

1 Location

9 More...

8 Recent Call

7Scan

6Networks

4Setup

(cont’d)

5 Own Number

1 Dialed

2 Received

3 Missed

2Active List

3 Scan Lists

<40 lists>

1 Scanning

1 Display

2 Oper. Mode

3TXI Mode

1 Private Num

2 Phone Num

6 Acc’ry Type

5Time & Date

1 Standard

2 Handset

3External

4External & Std

2Set

3Time Offset

4Format Time

5 Format Date

Time & Date

Time Only

Date Only

Off

1Networks Sel

14

English

The Display

Display Icons

When you turn on your MTM800, icons appear along the top of the

display to indicate the following conditions:

Display Icon Description

Trunked Mode Operation

Signal Strength (TMO)

Allows you to check signal strength. More bars indicate

a stronger signal.

Priority Scan

Indicates priority scanning is activated in the MTM800.

Data Connected

Displayed when the MTM800 is successfully

connected to an external device and ready for data

transfer.

Data Transmit/Receive

Displayed when the MTM800 is transferring data to/

receiving data from the external device (laptop or

desktop PC).

Direct Mode Operation

Signal Strength (DMO)

Indicates an incoming Direct Mode Group Call.

Direct Mode

Displayed when the MTM800 is in Direct mode.

DMO Gateway

Indicates that gateway is selected. The icon has three

states:

Solid — while the MTM800 is synchronised with the

gateway.

Flashing — while the MTM800 is not synchronised or

during attachment.

No icon — during a terminal to terminal and repeater

call.

15

English

Displaying Long Numbers or Messages

Three dots after a number or message indicate that it continues on

the next page. Press to read the next “text” page and to

return to the previous page.

DMO Repeater

Displayed when the repeater option in DMO is

selected. This icon has three states:

Solid — while the terminal has detected the repeater

(i.e., when the terminal receives a presence signal).

Blinking — while the terminal has not detected the

repeater or during attachment.

No icon — during a terminal to terminal and gateway

call.

General Icons

Unread Message

Indicates that you have unread messages in your

Inbox.

New Message Has Arrived

Your Inbox could not open due to an on-going activity.

The icon remains to remind you of new messages in

your Inbox.

Emergency

Appears while the MTM800 is in Emergency mode.

Display Icon Description

16

English

Getting Started

Powering the MTM800 On/Off (On/Off Button)

To power On, Press and hold the On/Off push button. Your MTM800

performs a self-check and registration routine. After successful

registration, the MTM800 is in service.

To power Off, press and hold the On/Off push button. You will hear

an audible beep and the Powering Off message is displayed.

Powering On the MTM800 (Ignition Sense)

If the MTM800 is configured with ignition sense, the terminal will

automatically turn on whenever the vehicle ignition is turned on.

Powering On the MTM800 (Ext. Emergency Switch)

If an external Emergency Switch is connected and the MTM800 is

powered off, press the Emergency Switch to power on. The

MTM800 will power on in Emergency mode.

Powering On with Transmit Inhibit Active

The TXI Mode remains active at power On.

You will be asked whether to leave the TXI Mode On or not.

Select 1 Exit TXI to deactivate the TXI Mode. If the MTM800 was

previously used in Trunked Mode (TMO), it will register to the

network. If the MTM800 was previously used in Direct Mode it will

remain in Direct Mode.

Select 2 Stay in TXI in Trunked Mode and the MTM800 powers

down; select 2 Stay in TXI in DMO mode and you remain in DMO

with TXI selected.

Ensure you have left the restricted area before

deactivating Transmit Inhibit.

17

English

Uninstalling the Radio

Unlocking the MTM800

Your MTM800 may be locked at power up.

To unlock the MTM800 after powering on, enter the code at the

prompt. The MTM800 enters the default home mode.

OPTION 1:

Before disconnecting the 13.2V main power

supply from the radio:

1. Switch off the radio.

2. Wait for a minimum of 4 seconds after the radio

Off Switch is released.

Disconnect the 13.2V main power supply.

OPTION 2:

Turn off the main power supply WITHOUT

switching OFF the radio.

18

English

Selecting TMO or DMO Operation

Entering TMO or DMO

Enter TMO or DMO in one of the following ways:

• Press and hold (TMO) if the MTM800 is in DMO.

• Press and hold (DMO) if the MTM800 is in TMO.

Calls (Trunked Mode Operation)

TMO Group Calls

A Group Call is a communication between you and others in a

talkgroup. A Talkgroup is a pre-defined set of subscribers enabled to

participate in and/or invoke a Group Call.

Talkgroups are divided into ranges. Each range may contain

several talkgroups.

Making a TMO Group Call

1. Press .

2. If this is the required talkgroup and range, press and hold the

PTT. Wait for the talk permit tone and then speak into the

microphone.

Release the PTT button to listen.

3. If you wish to call a talkgroup other than the one shown, press

or to scroll through the talkgroups.

4. To select a range other than the one shown, press , select the

Range option, use or to scroll. Press to confirm

your selection (or PTT to start the call in the new range).

When you start a call, all members of the selected talkgroup who

have their units turned on, will receive the transmission.

The “No Group” message is displayed when you are out of the

normal coverage area of your selected talkgroup. You must then

select a new talkgroup that is valid for your working location.

Sidan laddas...

Motorola TETRA MTM800 Basic User's Manual

Motorola TETRA MTM800 Basic User's Manual

på andra språk

Relaterade papper

Andra dokument