10
Setting the clock and date
After the unit is plugged into a mains supply or after a power failure, the time and date on the LCD display will
blink. The unit should be in standby mode to set the clock.
1. Press Time button, “Time setup” is displayed, press ENTER to confirm.
2. Press / to select “24H”or “12H”, Press ENTER confirm. The hour digits on the display will blink.
3. Press / to set the hour, press ENTER confirm, the minutes digits on the display will blink.
4. Press / to set the minutes, press ENTER confirm, the Year digits on the display will blink.
5. Press / to set the Year, press ENTER confirm, the Month digits on the display will blink.
6. Press / to set the Month, press ENTER confirm, the Day digits on the display will blink.
7. Press / to set the Day, press ENTER confirm, press / the select save “YES/NO”
Setting Alarm
Note: Check that the radio has the correct time and date before you set an alarm.
This unit may be used as an alarm clock. The CD/USB device or buzzer is activated to play at a preset time.
1. Press POWER to switch the unit to standby mode.
2. Make sure that you have set the clock correctly.
3. Press the ALARM button to set alarm 1; press ALARM button twice to set alarm 2
4.
“Alarm 1 (or 2) Setup” is displayed. Press / ENTER button to select.
5.
“Alarm 1 (or 2) Setup On time” is displayed and the hour digits for the alarm will flash.
6.
Press / repeatedly to set hour. Press ENTER to confirm.
7.
Press / to set minute, Press ENTER to confirm.
8.
Press / select the Alarm volume from 0 to 30, Press ENTER to confirm.
9.
Press / to scroll to choose OFF/USB/CD/FM/Buzzer. Press ENTER to confirm.
10.
Press / to choose the duration for the alarm. You can choose from 10 to 60 minutes. Press the ENTER
button to confirm. Use / to select YES and press ENTER to save the alarm setting.
11.
The display will show the current time and Alarm 1 (or Alarm 2 or at the same time)
Warning: When alarm source CD/USB is selected and there is no CD / USB inserted, there will sound”buzzer”
Note : Choose Alarm source OFF if the alarm shouldn’t activate the next day
Snooze
1. Whenever the alarm (alarm 1, alarm 2) comes on, it can be temporarily suspended for a short period of
approximately 9 minutes, by pressing the “SNOOZE” key once.
2. The alarm (alarm 1, alarm 2) will then automatically sound again after approximately 9 minutes have passed.
3. The “Zz” symbol will show on the display to remind that the snooze function is active.
4. To deactivate the snooze, press and release the “POWER” key.
Sleep Timer
1. Repeatedly press the SLEEP button, you can choose between 90/80/70/60/50/40/30/20/10 minutes. After
this time, the unit will go to standby mode. This is useful for falling asleep to music at night.
2. If you want to cancel the sleep mode, repeatedly press SLEEP until OFF appears on the display
Display Backlight
You can press the DIMMER button adjust the display backlight brightness, there are 3 options available, High,
Medium and Low.
DAB Radio mode
Carefully extend the telescopic antenna.
Press the POWER button to turn on the unit, press the MODE button to select to DAB mode, it will start up