Lenco DAR281 DAB Användarmanual

1

Model : DAR-081/DAR-281

User manual - DAB+/ FM radio with CD player, USB and Bluetooth

Gebruikershandleiding - DAB+/ FM-radio met cd-speler, USB en bluetooth

Bedienungsanleitung – DAB+/FM-Radio mit CD-Player, USB und Bluetooth

Mode d’emploi - Radio DAB+/ FM avec lecteur CD, USB et Bluetooth

Manual de usuario - radio DAB+/ FM con reproductor de CD, USB y

Bluetooth

Brugervejledning – DAB+/FM-radio med CD-afspiller, USB og Bluetooth

Användarhandbok – DAB+/FM-radio med CD-spelare, USB och Bluetooth

2

Index

ENGLISH .....................................................................................................................3

NEDERLANDS ......................................................................................................... 19

DEUTSCH................................................................................................................. 37

FRANÇAIS ................................................................................................................ 56

ESPAÑOL ................................................................................................................. 74

DANSK/NORSK ........................................................................................................ 93

SVENSKA ................................................................................................................ 111

Version 2.0

3

ENGLISH

CAUTION:

Usage of controls or adjustments or performance of procedures other than those specified

herein may result in hazardous radiation exposure.

PRECAUTIONS BEFORE USE

KEEP THESE INSTRUCTIONS IN MIND:

1. Do not cover or block any ventilation openings. When placing the device on a shelf,

leave 5 cm (2”) free space around the whole device.

2. Install in accordance with the supplied user manual.

3. Keep the device away from heat sources such as radiators, heaters, stoves, candles and

other heat-generating products or naked flame. The device can only be used in

moderate climates. Extremely cold or warm environments should be avoided. Working

temperature between 0° and 35°C.

4. Avoid using the device near strong magnetic fields.

5. Electrostatic discharge can disturb normal usage of this device. If so, simply reset and

restart the device following the instruction manual. During file transmission, please

handle with care and operate in a static-free environment.

6. Warning! Never insert an object into the product through the vents or openings. High

voltage flows through the product and inserting an object can cause electric shock

and/or short circuit internal parts. For the same reason, do not spill water or liquid on

the product.

7. Do not use in wet or moist areas such as bathrooms, steamy kitchens or near

swimming pools.

8. The device shall not be exposed to dripping or splashing and make sure that no objects

filled with liquids, such as vases, are placed on or near the apparatus.

9. Do not use this device when condensation may occur. When the unit is used in a warm

wet room with damp, water droplets or condensation may occur inside the unit and

the unit may not function properly; let the unit stand in power OFF for 1 or 2 hours

before turning on the power: the unit should be dry before getting any power.

10. Although this device is manufactured with the utmost care and checked several times

before leaving the factory, it is still possible that problems may occur, as with all

electrical appliances. If you notice smoke, an excessive build-up of heat or any other

unexpected phenomena, you should disconnect the plug from the main power socket

immediately.

11. This device must operate on a power source as specified on the specification label. If

you are not sure of the type of power supply used in your home, consult your dealer or

local power company.

12. Keep away from animals. Some animals enjoy biting on power cords.

13. To clean the device, use a soft dry cloth. Do not use solvents or petrol based fluids. To

remove severe stains, you may use a damp cloth with dilute detergent.

14. The supplier is not responsible for damage or lost data caused by malfunction, misuse,

modification of the device or battery replacement.

15. Do not interrupt the connection when the device is formatting or transferring files.

Otherwise, data may be corrupted or lost.

4

16. If the unit has USB playback function, the USB memory stick should be plugged into the

unit directly. Don’t use an USB extension cable because it can cause interference

resulting in failing of data.

17. The rating label has been marked on the bottom or back panel of the device.

18. This device is not intended for use by people (including children) with physical, sensory

or mental disabilities, or a lack of experience and knowledge, unless they’re under

supervision or have received instructions about the correct use of the device by the

person who is responsible for their safety.

19. This product is intended for non-professional use only and not for commercial or

industrial use.

20. Make sure the unit is adjusted to a stable position. Damage caused by using this

product in an unstable position vibrations or shocks or by failure to follow any other

warning or precaution contained within this user manual will not be covered by

warranty.

21. Never remove the casing of this device.

22. Never place this device on other electrical equipment.

23. Do not allow children access to plastic bags.

24. Only use attachments/accessories specified by the manufacturer.

25. Refer all servicing to qualified service personnel. Servicing is required when the device

has been damaged in any way, such as the power supply cord or the plug, when liquid

has been spilled or objects have fallen into the device, when the device has been

exposed to rain or moisture, does not operate normally, or has been dropped.

26. Long exposure to loud sounds from personal music players may lead to temporary or

permanent hearing loss.

27. If the product is delivered with power cable or AC power adaptor:

⚫ If any trouble occurs, disconnect the AC power cord and refer servicing to

qualified personnel.

⚫ Don’t step on or pinch the power adaptor. Be very careful, particularly near the

plugs and the cable’s exit point. Do not place heavy items on the power adaptor,

which may damage it. Keep the entire device out of children’s reach! When

playing with the power cable, they can seriously injure themselves.

⚫ Unplug this device during lightning storms or when unused for a long period.

⚫ The socket outlet must be installed near the equipment and must be easily

accessible.

⚫ Do not overload ac outlets or extension cords. Overloading can cause fire or

electric shock.

⚫ Devices with class 1 construction should be connected to a main socket outlet

with a protective earthed connection.

⚫ Devices with class 2 construction do not require an earthed connection.

⚫ Always hold the plug when pulling it out of the main supply socket. Do not pull

the power cord. This can cause a short circuit.

⚫ Do not use a damaged power cord or plug or a loose outlet. Doing so may result

in fire or electric shock.

28. If the product contains or is delivered with a remote control containing coin/cell

batteries:

Warning:

⚫ “Do not ingest battery, Chemical Burn Hazard” or equivalent working.

5

⚫ [The remote control supplied with] This product contains a coin/button cell

battery. If the battery is swallowed, it can cause severe internal burns in just

2 hours and can lead to death.

⚫ Keep new and used batteries away from children.

⚫ If the battery compartment does not close securely, stop using the product and

keep it away from children.

⚫ If you think batteries might have been swallowed or placed inside any part of the

body, seek immediate medical attention.

29. Caution about the use of Batteries:

⚫ Danger of explosion if battery is incorrectly replaced. Replace only with the same

or equivalent type.

⚫ Battery cannot be subjected to high or low extreme temperatures, low air

pressure at high altitude during use, storage or transportation.

⚫ Replacement of a battery with an incorrect type that can result in an explosion or

the leakage of flammable liquid or gas.

⚫ Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting

of a battery, that can result in an explosion.

⚫ Leaving a battery in an extremely high temperature surrounding environment

that can result in an explosion or that leakage of flammable liquid or gas.

⚫ A battery subjected to extremely low air pressure that may result in an explosion

or the leakage of flammable liquid or gas.

⚫ Attention should be drawn to the environmental aspects of battery disposal.

INSTALLATION

• Unpack all parts and remove protective material.

• Do not connect the unit to the mains before checking the mains voltage and before all

other connections have been made.

WARNING

Class 1 Laser Product

Warning: Do not touch the lens.

6

Accessories:

Remote control

User manual

AUX cable

3.5mm Line in cable

Indoor antenna

AC adapter

7

Description of Parts

1.

Mode

Rotate the knob to Select the audio mode: DAB-FM- CD- USB-BT-LINE

2.

VU meter

3.

Remote control receiver

4.

Display

5.

Wireless charge position

6.

Volume knob

7.

Speaker R

8.

Earphone jack

9.

Line in jack

10.

USB charge 5V /1A port

11.

USB MP3 play jack

12.

Power on/off

13.

Info/Alarm

14.

Tone adjust knob

15.

CD door

8

16.

Treble adjust knob

17.

Bass adjust knob

18.

L/R Balance adjust

19.

Menu / Time

20.

Previous button

21.

Play/Pause/Enter button

22.

NEXT button

23.

CD open/close button

24.

Speaker L

25.

Bass reflex hole

26.

DAB/FM indoor antenna

27.

AUX in jack

28.

USB-C Adapter in

Remote

1.

Power on/off

2.

Time setting

3.

Alarm setting

4.

EQ setting

5.

Dimmer

6.

Mode

7.

Up cursor button

8.

Go back one track / Left cursor button

9.

Down cursor button

10.

Volume -

11.

Program for CD/USB

Repeat for CD/USB

12.

CD open /close

13.

Sleep setting

14.

Snooze

15.

Info

16.

Menu

17.

Stop

18.

Enter/Play /pause

19.

Go forward one track / Right cursor button

20.

Vol +

21.

0…9 for selection of the CD/USB song number

22.

Mute

BATTERY INSTALLATION

Battery must be inserted correctly to avoid damaging to the remote control. Always remove the

battery when the remote control will not be used for a long period of time, as this may cause leakage

of the battery and subsequently damage the remote.

Inserting the remote control batteries

1. Push the release clip on the battery compartment downwards and lift to remove the cover.

2. Insert 2 x 1.5 V AAA batteries (not supplied) the correct way around, by observing the polarity (+ and -)

indicated on the battery compartment.

9

3. Place the furthest end of the cover in position on top of the battery compartment. Then press the

nearest end of the cover until you hear it click firmly into place.

If the distance required between the remote control and the appliance decreases, the batteries are exhausted. In

this case replace the batteries with new ones.

Auto standby

When playing media from a connected device, the device automatically switches to standby if:

• No button is pressed for 10 minutes,

• No audio from a connected device for 10 minutes.

Operation

Press the POWER button once to turn ON and hold the button to power OFF the unit.

Adjusting the volume

Rotate the Volume knob clockwise or press the Volume + on remote control to increase the volume.

Rotate the Volume knob counter-clockwise or press the Volume - on remote contro to decrease the volume.

The display will show the volume setting.

Adjust the Tone

Rotate slowly the Tone knob to adjust the tone quality.

Adjust the Treble

Rotate the treble knob clockwise to increase the TREBLE

Rotate the treble knob counter-clockwise to decrease the TREBLE

Adjust the Bass

Rotate the Bass knob clockwise to increase the BASS

Rotate the Bass knob counter-clockwise to decrease the BASS

Adjust the Balance

Rotate the Balance knob clockwise to increase the right channel

Rotate the Balance knob counter-clockwise to increase the left channel

Mute function

Pressing the MUTE button on remote control will mute the volume. “Volume Muted” will appear on the display.

Press this button again to cancel the mute function.

Clock and Timers

10

Setting the clock and date

After the unit is plugged into a mains supply or after a power failure, the time and date on the LCD display will

blink. The unit should be in standby mode to set the clock.

1. Press Time button, “Time setup” is displayed, press ENTER to confirm.

2. Press  / to select “24H”or “12H”, Press ENTER confirm. The hour digits on the display will blink.

3. Press  / to set the hour, press ENTER confirm, the minutes digits on the display will blink.

4. Press / to set the minutes, press ENTER confirm, the Year digits on the display will blink.

5. Press  / to set the Year, press ENTER confirm, the Month digits on the display will blink.

6. Press  / to set the Month, press ENTER confirm, the Day digits on the display will blink.

7. Press  / to set the Day, press ENTER confirm, press  / the select save “YES/NO”

Setting Alarm

Note: Check that the radio has the correct time and date before you set an alarm.

This unit may be used as an alarm clock. The CD/USB device or buzzer is activated to play at a preset time.

1. Press POWER to switch the unit to standby mode.

2. Make sure that you have set the clock correctly.

3. Press the ALARM button to set alarm 1; press ALARM button twice to set alarm 2

4.

“Alarm 1 (or 2) Setup” is displayed. Press / ENTER button to select.

5.

“Alarm 1 (or 2) Setup On time” is displayed and the hour digits for the alarm will flash.

6.

Press / repeatedly to set hour. Press ENTER to confirm.

7.

Press / to set minute, Press ENTER to confirm.

8.

Press / select the Alarm volume from 0 to 30, Press ENTER to confirm.

9.

Press / to scroll to choose OFF/USB/CD/FM/Buzzer. Press ENTER to confirm.

10.

Press / to choose the duration for the alarm. You can choose from 10 to 60 minutes. Press the ENTER

button to confirm. Use / to select YES and press ENTER to save the alarm setting.

11.

The display will show the current time and Alarm 1 (or Alarm 2 or at the same time)

Warning: When alarm source CD/USB is selected and there is no CD / USB inserted, there will sound”buzzer”

Note : Choose Alarm source OFF if the alarm shouldn’t activate the next day

Snooze

1. Whenever the alarm (alarm 1, alarm 2) comes on, it can be temporarily suspended for a short period of

approximately 9 minutes, by pressing the “SNOOZE” key once.

2. The alarm (alarm 1, alarm 2) will then automatically sound again after approximately 9 minutes have passed.

3. The “Zz” symbol will show on the display to remind that the snooze function is active.

4. To deactivate the snooze, press and release the “POWER” key.

Sleep Timer

1. Repeatedly press the SLEEP button, you can choose between 90/80/70/60/50/40/30/20/10 minutes. After

this time, the unit will go to standby mode. This is useful for falling asleep to music at night.

2. If you want to cancel the sleep mode, repeatedly press SLEEP until OFF appears on the display

Display Backlight

You can press the DIMMER button adjust the display backlight brightness, there are 3 options available, High,

Medium and Low.

DAB Radio mode

Carefully extend the telescopic antenna.

Press the POWER button to turn on the unit, press the MODE button to select to DAB mode, it will start up

11

into DAB mode.

Auto Scan

1. If this is the first time the unit has entered DAB Mode, it will automatically start an ‘Auto Scan’ to

search for available stations. (Once DAB Mode has been used before, the unit will automatically select

the previously played station)

2. Hold the ENTER button to automatically start auto scan to search for available stations. During the

scanning process, the lower line of the display shows a bar graph indicating the progress of the scan.

Manual Scan

1.

Press the MENU key on main unit to enter the menu.

2.

Press the [ ] or [ ] button to select “Manual tune”, press the [ENTER] button to the service menu.

3.

Press [ ] or [ ] enter to tune in the desired channel. A graph will indicate the signal strength if you

press [ENTER]

4.

Press [MENU] or [ / ] to exit scan.

5.

If no stations are found, please ensure the aerial is extended and test the reception by doing another

auto scan in a different location.

DRC (Dynamic Range Control)

Dynamic Range Control (also known as DRC) is a technology used to help make quieter sounds easier to

hear in a noisy environment.

1.

In DAB menu, press the [ ] / [ ] button or  /  button on remote control to select “DRC”,

press the [ENTER] button to display “*” to the top right.

2.

DRC OFF - DRC is switched off, broadcast DRC will be ignored. DRC LOW - DRC level is set to 1/2 that

sent by broadcaster.

DRC HIGH - DRC level is used as sent by broadcaster.

Press MENU to confirm the setting. The display will return to normal.

Prune (To Remove Stations That are Listed But Unavailable)

In DAB menu, press [ ] or [ ] to display the “Prune” submenu, press [ENTER] to select the Prune option.

System (DAB)

In DAB menu, press [ ] or [ ] to show the “SYSTEM” submenu, press the [ENTER] button to go to the

system settings.

1.

Language

Press [ENTER] to go to language selection; the default source language is English, the selected

12

language will have ”*” displayed at the top right. Users may choose between English, French, Italian,

Deutsch, Polish, Nederlands, Espanol

2.

Factory Reset

Press [ENTER] to perform a factory reset. If you wish to perform the reset operation, push [ ] or

[ ] until “YES” is highlighted on the display and press [ENTER]. A full reset of your radio will be

performed. All presets and station lists will be erased.

3.

SW Version

Press [ENTER] to view DAB software version. Press Menu to stop displaying the software version.

*If there are no operations after 30 seconds, the display will return to normal.

Preset

1.

Preset Recall

In DAB menu, press [ ] or [ ] station select “Preset Recall”, then press [ENTER] to tune to the

stored in preset memory. Or press PROG. Button (11) of the remote control.

Note: If you have not previously stored a preset station and the preset button is pressed, “Empty

preset” will be displayed.

2.

Preset Store

You may store your preferred DAB stations to the preset station memories. There are 50 memory

presets in your radio. Presets are remembered by your radio in the event of a power failure.

In DAB menu, select [Preset store] with and , then press [ENTER]. Press the “previous or next”

buttons to select a storage space， then press [ENTER] to confirm the desired preset number under

which you will store the station you are currently playing. Press [ENTER] to confirm.

FM Radio

Carefully extend the telescopic aerial to its full length.

Auto Scan

1.

Rotate the MODE knob to select “FM Mode”.

2.

Long Press button, and your radio will scan and stop automatically when it finds a station of

sufficient signal strength.

3.

After a few seconds, the display will update. The display will show the station frequency. If the signal

is strong enough and the station signal contains RDS data, then the radio will display the station name.

4.

To find other stations, press and hold the button as before.

5.

To scan the FM band in the opposite direction (high frequencies to low frequencies), press the

button and hold for 2 seconds.

13

6.

When the waveband end is reached, your radio will recommence tuning from the opposite waveband

end.

Manual Scan

1.

Press the MODE key on the main unit to select “FM Mode’’.

2.

Select FM mode as previously described, if required.

3.

Press or shortly adjust tuning. Each press of the tuning button will change the frequency up or

down by 50 kHz.

4.

When the waveband end is reached, the radio will recommence tuning from the opposite waveband

end. If no stations are found, please ensure the aerial is extended and test the reception by doing

another auto scan in a different location.

Menu

1.

Scan Setting

In FM mode, press MENU to enter the FM menu, then press or to select [Scan setting], then press

ENTER to select the sensitivity setting:

1.1.

All stations: ~15dB

1.2.

Strong stations only: ~19dB,

2.

Audio Setting

2.1.

Stereo allowed:

2.2.

Forced mono

2.3.

System (FM system), same as DAB system setting.

3.

PRESET:

In FM menu, press [ ] or [  ] station select “Preset Recall”, then press [ENTER] to tune to the stored

in preset memory. Or press PROG. Button (15) of the remote control.

14

3.1.

Preset Store (Save a Station):

You may store your preferred FM stations to the preset station memories. There are 50 memory

presets in your radio. Presets are remembered by your radio in the event of a power failure.

In FM menu, select [Preset store] with  and , then press [ENTER]. Press the “previous or next”

buttons to select a storage space, then press [ENTER] to confirm the desired preset number under

which you will store the station you are currently playing. Press [ENTER] to confirm.

Bluetooth Mode

You must follow several steps to connect your mobile phone:

1. Activate Bluetooth from your mobile phone (please refer to your phone’s user manual)

2. Press POWER button to turn on the unit, then press the MODE button repeatedly until the “Bluetooth

searching...” indicator appears on the LCD display. It will be ready to pair automatically.

3. Use your mobile phone to search for the Bluetooth device named “Lenco DAR-081/Lenco DAR-281”.

4. Select “Lenco DAR-081/Lenco DAR-281” on your phone and it present the option to connect or not.

Please connect to it using the password “0000” (if any). When you are successfully connected, the

Bluetooth indicator “Bluetooth connected” appears on the LCD display.

Automatically Connecting with Your Phone

Pairing is only needed the first time the unit and phone are used together. When the unit and phone have been

paired once, they will automatically connect when the unit is on and Bluetooth is activated on the phone. The next

time you power on, the unit will automatically connect to the most recently connected mobile phone.

Play from Bluetooth Device

After successful Bluetooth connection, press the button to play. Press the or button to skip the tracks

backwards or forwards. To pause or resume play, press the button again. Press and hold the button to

disconnect all paired Bluetooth devices.

Playing a compact disc (CD)

NOTE: Never touch the laser lens inside the CD compartment. Clean the laser lens using a CD cleaner disc if it

becomes dirty.

1. Press the POWER button to turn on the unit.

2. Press the MODE button repeatedly to select the CD function.

3. Press the button to open the CD door and insert a CD into the tray (with printed label side facing

up).

4. Press the button again to close the CD DOOR and the disc will rotate for a few seconds, then play the 1st

track automatically.

5.

To temporarily stop playback, press the button, and to resume playback, press it again.

6.

Press the button to STOP play.

REVERSE/FORWARD

1.

The and Buttons used to jump to a different track number or hold to scan disc tracks at high speed.

2.

Press the button once to skip to the beginning of the current track. Press it two or more times to hear

previous tracks on the disc.

3.

Press the button to start playing the next tracks on the disc.

4.

Press and hold the button; The current track will be rewarded towards the start of the track

15

track(s); When the desired track section is found, release the button and normal play will resume.

5.

Press and hold the button, the current track will be sped up towards the next track(s).

When the desired track section is found, release the selected button and normal playback will resume.

REPEAT FUNCTION

The CD REPEAT button may be used to repeat a single track or repeat all tracks on a compact disc.

1.

Press the REPEAT button once during playback, the “REPEAT ONE” sign will appear on the LCD display for

about 2 seconds. The same track will be repeated over and over.

2.

Press the REPEAT button a second time to repeat all tracks. The “REPEAT ALL” sign will appear on the LCD

display for about 2 seconds.

3.

To cancel REPEAT PLAY, press the REPEAT button repeatedly until “REPEAT OFF” appears on the LCD display

for about 2 seconds.

PROGRAM FUNCTION

The Program feature may be used to program up to 20 tracks to play in a selected order.

1.

While in the stop mode only (CD is not playing), press and hold the PROG button for 2 seconds,

and the LCD display will show the wording “P 01” and “T 01” starts to flash.

2.

Press the and buttons to allocate the desired track.

3.

Press the PROG button to select and store the track into memory.

4.

Repeat step 2 to 3 to select up to 20 tracks.

5.

To play the selected tracks (in the program mode), press the button.

6.

Press the button to hear the previous program track or press the button to hear the next program

track.

Note: After all programmed tracks have been played, the CD player will return to the stop mode.

7.

To clear the programmed tracks from memory, press button twice.

MP3 DISC SECTION

1.

Press the POWER button to turn on the unit.

2.

Press the MODE button repeatedly to select CD Mode.

3.

Close the CD Door and the disc will rotate for a few seconds and then play the 1st track automatically.

4.

Press the and buttons to choose a track.

5.

To temporarily stop playback, press the button; to resume, press the button again.

6.

Press the button to stop play.

Note: Because MP3 discs have a large capacity, disc access times are a little longer.

Repeat Playing Function

Single Track Repeat

Press the REPEAT button once to repeat a single track. The display appears as “Repeat one”.

Whole Disc Repeat

In Play mode, press the REPEAT button 2 times to repeatedly play all tracks on the disc. The display will show

“Repeat All”.

To cancel repeat play, press the REPEAT button repeatedly until the “Repeat off” sign appears.

PROGRAM PLAY

The tracks on the disc can be programmed to play in any order (up to 20 tracks can be programmed). Note: this

can only be done while in Stop mode

1.

Press the PROG button while in Stop mode. “P01” “F01” will appear on the display and “T001” will

flash.

2.

Press the or button to select the desired tracks in the album, then press the PROG button to store in

the memory.

3.

The first track number is now stored in memory, and the program number changes to “P02”, waiting

for your next selection.

4.

Repeat Steps 1 – 3 to program additional tracks.

After programming is finished, press the button, and programmed play begins from the first programmed

16

track. The player stops automatically after all programmed tracks have been played. (Press the button twice to

cancel the programmed tracks memory).

Playing Music via USB

This device has been developed using the latest technical advances in the USB field. However, given the wide

range of USB storage device types that are currently on the market, we unfortunately cannot guarantee full

compatibility with all USB storage devices. For this reason, in rare cases, there may be problems in playing back

files from USB storage devices. This is not due to device malfunction.

1. Press the POWER button to turn on the unit.

2. Press the MODE button repeatedly until ‘USB’ appears on the display.

3. Connect a USB storage device directly into the PLAYER USB port. The display briefly shows the number of

folders and then the total number of tracks. Playback will automatically start.

4. Operation of the control buttons is the same as for MP3 CD playback. Please refer to MP3 DISC SECTION

operations as described previously.

NOTES:

• Always directly connect a USB storage medium to the USB port to prevent any malfunctions.

• The PLAYER USB port is not designed for charging external devices.

• Important: Switch the device to a different operating mode before you remove the USB storage device.

AUX Input Jack

1. Press the POWER button to turn on the unit.

2. Rotate the MODE button repeatedly to select the Aux-In mode. ‘Aux-In’ will appear on the LCD display.

3. Connect the AUX connect wire from the line out jack of your personal player (e.g. portable MP3player) to the

AUX input jack.

4. Start playback from your personal player.

Line Input Jack

1. Press the POWER button to turn on the unit.

2. Press the MODE button repeatedly to select the Line-In mode. ‘Line-In’ will appear on the LCD display.

3. Connect the Line connect wire from the line out jack of your personal player (e.g. portable MP3player) to the

Line input jack.

4. Start playback from your personal player.

Equalizer Function

With your unit switched on (not in Standby mode):

1.

Each time you press the EQ. button, you will change the EQ setting like . Normal, Classic, Jazz, Pop, Rock,

according to your individual preferences.

2.

Press EQ button twice, use the or button to scroll the Bass setting.

3.

Press EQ button three times, use the or button to scroll the Treble setting.

Wireless Charger Function

Simply place your QI wireless charging device on the wireless charger area indicated on the top surface and

charging will begin on contact.

Output power :5W/7.5W/10W

USB Charging (5V Out)

The USB port is designed for charging external devices, such as smart phones. Output

power is 5V 1A

Technical Specifications

17

Input

AC 100-240V ~ 50/60Hz

Music power

Speaker Driver

Batteries in remote control

2 x 15W RMS

3Ω, 8W,4pcs

2x1.5V AAA / UM4 /LR03(not included)

DAB Frequency

174.928 - 239.200 MHz

FM Frequency

87.5 - 108 MHz

Bluetooth Frequency:

Bluetooth Version:

EIRP / RF output power:

2402 - 2480MHz

V5.0

<3.56dBm

Power consumption

Max 50W

Power consumption (standby)

< 1W

Operating Temperature

0°C-35°C

Operating position

Horizontal

Dim. unit

425 x 280 x 135mm

Weight

4.8 kgs

Adaptor specifications

• Adaptor manufacturer name or trademark: Shenzhen Boshenggao Techn.Co., Ltd, 106 Fuyuan Rd. St Baoan

District Shenzhen Guangdong 518103, China

• Adaptor model number: BSG065-1504000EU

• Input voltage and frequency: 100-240V, 50/60Hz

• Output voltage, current, power: 15.0V, 4.0A, 60W

• Average active efficiency: 89.10 %

• Efficiency at low load (10%): 80.2%

• No-load power consumption: 0.10W

Remark: The maximum connection distance is around 10 meters. Please place your Bluetooth device as close as

possible to this device to avoid connection getting disturbed.

WARNING! Risk of hearing impairment

• Set a low volume on the playback device before connecting headphones.

• Avoid excessive volume, particularly over extended periods or frequent use. Excessive

volume can result in permanent hearing impairment.

About the disks

Handling

Do not touch the underside of disks.

Hold disks by the edges to avoid leaving fingerprints on the surface. Any

dust, fingerprints or scratches may cause a malfunction.

Never affix a label or sticky tape to the disk.

Storage

Put disks back in their case after use.

Never expose disks to direct sunlight or heat sources. Never leave disks inside a

car parked in full sunlight.

Cleaning

Use a clean, soft, lint-free cloth to clean the disk, working from the center

outwards in a straight line. Do not use solvents such as petrol, thinners,

commercially available cleaners or antistatic sprays for vinyl disks.

18

1. Guarantee

Lenco offers service and warranty in accordance to European law, which means that in case

of repairs (both during and after the warranty period) you should contact your local dealer.

Important note: It is not possible to send products that need repairs to Lenco directly.

Important note: If this unit is opened or accessed by a non-official service center in any way,

the warranty expires.

This device is not suitable for professional use. In case of professional use, all warranty

obligations of the manufacturer will be voided.

2. Disclaimer

Updates to Firmware and/or hardware components are made regularly. Therefore some of

the instruction, specifications and pictures in this documentation may differ slightly from

your particular situation. All items described in this guide for illustration purposes only and

may not apply to particular situation. No legal right or entitlements may be obtained from

the description made in this manual.

3. Disposal of the Old Device

This symbol indicates that the relevant electrical product or battery should

not be disposed of as general household waste in Europe. To ensure the

correct waste treatment of the product and battery, please dispose them in

accordance to any applicable local laws of requirement for disposal of

electrical equipment or batteries. In so doing, you will help to conserve

natural resources and improve standards of environmental protection in

treatment and disposal of electrical waste (Waste Electrical and Electronic

Equipment Directive).

4. DECLARATION OF CONFORMITY

Hereby, Commaxx declares that the radio equipment type [Lenco DAR-081/Lenco DAR-281]

is in compliance with directive 2014/53/EU. The full text of the EU declaration of conformity

is available at the following internet address:

https://commaxx-certificates.com/doc/dar-081_doc.pdf

https://commaxx-certificates.com/doc/dar-281_doc.pdf

Type RF

Frequency range (MHz)

Power (dBm)

DAB

174-240

-

FM

87.5-108

-

Bluetooth

2402-2480

<6

5. Service

For more information and helpdesk support, please visit www.lenco.com

19

NEDERLANDS

LET OP:

Gebruik van bedieningen of afstellingen of uitvoer van procedures anders dan gespecificeerd

in deze documentatie kan leiden tot blootstelling aan schadelijke straling.

VOORZORGSMAATREGELEN VOOR GEBRUIK

ONTHOUD DE VOLGENDE INSTRUCTIES:

1. Bedek of blokkeer de ventilatieopeningen niet. Wanneer u het apparaat op een schap

plaatst, dient u 5 cm (2”) vrije ruimte rondom het gehele apparaat te behouden.

2. Installeer het product volgens de meegeleverde gebruikershandleiding.

3. Houd het apparaat uit de buurt van hittebronnen, zoals radiatoren, verwarmingen,

kachels, kaarsen en andere hittegenererende producten of open vuur. Het apparaat

kan alleen worden gebruikt in een gematigd klimaat. Extreem koude of warme

omgevingen dienen te worden vermeden. Bedrijfstemperatuur tussen 0 °C en 35 °C.

4. Gebruik dit apparaat niet in de buurt van krachtige magnetische velden.

5. Elektrostatische ontlading kan normaal gebruik van dit apparaat verstoren. U hoeft het

apparaat in dit geval slechts te resetten en opnieuw op te starten volgens de

gebruikershandleiding. Wees voorzichtig tijdens bestandsoverdracht en gebruik het

product in een omgeving zonder statische interferentie.

6. Waarschuwing! Steek nooit een voorwerp via de ventilatie- of andere openingen in het

product. Er is hoogspanning in het product aanwezig en als u er een object insteekt,

kan dat een elektrische schok veroorzaken en/of kortsluiting in de interne onderdelen.

Mors om dezelfde reden geen water of vloeistof op het product.

7. Gebruik het apparaat niet in vochtige ruimtes, zoals badkamers, stomende keukens of

in de buurt van zwembaden.

8. Het apparaat mag niet worden blootgesteld aan druppels en spetters en zorg ervoor

dat er geen met vloeistof gevulde voorwerpen, zoals vazen, op of in de buurt van het

apparaat worden geplaatst.

9. Gebruik dit apparaat niet wanneer condensatie kan optreden. Wanneer het apparaat

in een warme en vochtige kamer wordt gebruikt, dan kunnen er waterdruppeltjes of

condensatie binnenin het apparaat worden gevormd waardoor het apparaat mogelijk

niet meer goed werkt; houd en apparaat 1 of 2 uur op UIT staan voordat u de voeding

weer inschakelt: het apparaat dient droog te zijn voordat deze stroom ontvangt.

10. Alhoewel dit apparaat met grote zorg gefabriceerd en verschillende keren

geïnspecteerd is voordat het de fabriek verlaat, is het nog steeds mogelijk dat er

problemen optreden, zoals met alle elektrische apparaten. Als u rook, een overmatige

hitteontwikkeling of enig ander onverwacht verschijnsel, moet u onmiddellijk de

stekker van het netsnoer uit het stopcontact halen.

11. Dit apparaat moet werken op een voedingsbron, zoals aangegeven op het

specificatieplaatje. Als u twijfelt over het type voeding dat gebruikt wordt in uw huis,

raadpleeg dan uw dealer of plaatselijk energiebedrijf.

12. Buiten bereik van dieren houden. Sommige dieren bijten graag op voedingskabels.

13. Gebruik een zacht, droog doekje om het apparaat te reinigen. Gebruik geen

oplosmiddelen of op benzine gebaseerde vloeistoffen. U kunt een vochtig doekje met

verdund schoonmaakmiddel gebruiken om hardnekkige vlekken te verwijderen.

20

14. De leverancier is niet verantwoordelijk voor schade of verloren gegevens veroorzaakt

door storing, misbruik, modificatie van het apparaat of batterijvervanging.

15. Onderbreek nooit de verbinding wanneer het apparaat formatteert of bestanden

overdraagt. De gegevens kunnen anders corrupt of verloren raken.

16. Indien het apparaat een USB-afspeelfunctie heeft, moet de USB-geheugenstick

rechtstreeks op het apparaat worden aangesloten. Gebruik geen USB-verlengkabel,

omdat die kan leiden tot storingen met foutieve gegevens als gevolg.

17. Het nominale specificatielabel is te vinden op het paneel aan de onder- of achterkant

van het apparaat.

18. Dit apparaat is niet bestemd voor gebruik door mensen (inclusief kinderen) met

fysieke, zintuiglijke of geestelijke gebreken of gebrek aan kennis en ervaring, tenzij zij

onder toezicht staan of instructies hebben over het juiste gebruik van het apparaat

hebben gekregen van de persoon die verantwoordelijk is voor hun veiligheid.

19. Dit product is alleen voor niet-professioneel gebruik bedoeld en niet voor commercieel

of industrieel gebruik.

20. Verzeker u ervan dat het apparaat in een stabiele positie staat opgesteld.

Beschadigingen veroorzaakt door het gebruik van dit apparaat in een onstabiele

positie, trillingen of schokken of door het niet opvolgen van andere waarschuwingen of

voorzorgsmaatregelen beschreven in deze gebruikshandleiding worden niet gedekt

door de garantie.

21. Verwijder nooit de behuizing van dit apparaat.

22. Plaats dit apparaat nooit op andere elektrische apparatuur.

23. Geef kinderen geen gelegenheid in aanraking met plastic zakken te komen.

24. Gebruik uitsluitend uitbreidingen/accessoires gespecificeerd door de fabrikant.

25. Laat alle reparaties over aan gekwalificeerd onderhoudspersoneel. Onderhoud is

vereist als het apparaat hoe dan ook is beschadigd, zoals bijvoorbeeld het netsnoer of

de stekker, wanneer er vloeistof of een voorwerp in het apparaat is terechtgekomen,

wanneer het apparaat is blootgesteld aan regen of vocht, als het niet normaal werkt of

is gevallen.

26. Langdurige blootstelling aan harde geluiden van persoonlijke muziekspelers kan leiden

tot tijdelijk of permanent gehoorverlies.

27. Als het product wordt geleverd met voedingskabel of AC-stroomadapter:

⚫ Als er problemen optreden, koppel de wisselstroomvoedingskaart dan los en laat

reparaties over aan bevoegd personeel.

⚫ Nooit op de stroomadapter stappen of deze indrukken. Wees voornamelijk

voorzichtig in de buurt van de stekkers en het punt waar de kabel uit het

apparaat komt. Plaats geen zware voorwerpen op de stroomadapter, om

beschadiging ervan te voorkomen. Houd het gehele apparaat buiten bereik van

kinderen! Wanneer kinderen met de voedingskabel spelen, kunnen zij ernstig

letsel oplopen.

⚫ Haal de stekker uit het stopcontact tijdens onweer of wanneer u deze langere

tijd niet gebruikt.

⚫ Het stopcontact moet in de buurt van de apparatuur zijn geïnstalleerd en

eenvoudig te bereiken zijn.

⚫ Overbelast stopcontacten of verlengsnoeren niet. Overbelasting kan brand of

een elektrische schok veroorzaken.

Sidan laddas ...

Lenco DAR281 DAB Användarmanual

Lenco DAR281 DAB Användarmanual

på andra språk

Relaterade papper

Andra dokument