Hikoki C3607DB Användarmanual

varumärke: Hikoki

Modell: C3607DB

Typ: Användarmanual

C 3607DB

en Handling instructions

de Bedienungsanleitung

fr Mode d’emploi

it Istruzioni per l’uso

nl Gebruiksaanwijzing

es Instrucciones de manejo

pt Instruções de uso

sv Bruksanvisning

da Brugsanvisning

no Bruksanvisning

fi Käyttöohjeet

el Οδηγίες χειρισμού

2023/07/19 18:15:57Stylesheet: EU Version: 2023.6.21

C3607DB_C99749581_306_WE_NE_Gre

789

16 17

2 3

4 5

6 7

2023/07/19 18:15:57Stylesheet: EU Version: 2023.6.21

C3607DB_C99749581_306_WE_NE_Gre

8 9

21 22

0°–45°

2023/07/19 18:15:57Stylesheet: EU Version: 2023.6.21

C3607DB_C99749581_306_WE_NE_Gre

45° 0°

+ =

27 28

2023/07/19 18:15:57Stylesheet: EU Version: 2023.6.21

C3607DB_C99749581_306_WE_NE_Gre

31 31

39 38

0°

45°

2023/07/19 18:15:57Stylesheet: EU Version: 2023.6.21

C3607DB_C99749581_306_WE_NE_Gre

2023/07/19 18:15:57Stylesheet: EU Version: 2023.6.21

C3607DB_C99749581_306_WE_NE_Gre

a b

2023/07/19 18:15:57Stylesheet: EU Version: 2023.6.21

C3607DB_C99749581_306_WE_NE_Gre

English (Original instructions)

GENERAL POWER TOOL SAFETY

WARNINGS

WARNING

Read all safety warnings, instructions, illustrations

and specifications provided with this power tool.

Failure to follow all instructions listed below may result in

electric shock, fire and/or serious injury.

Save all warnings and instructions for future

reference.

The term “power tool” in the warnings refers to your mains-

operated (corded) power tool or battery-operated

(cordless) power tool.

1) Work area safety

a) Keep work area clean and well lit.

Cluttered or dark areas invite accidents.

b) Do not operate power tools in explosive

atmospheres, such as in the presence of

flammable liquids, gases or dust.

Power tools create sparks which may ignite the dust

or fumes.

c) Keep children and bystanders away while

operating a power tool.

Distractions can cause you to lose control.

2) Electrical safety

a) Power tool plugs must match the outlet. Never

modify the plug in any way. Do not use any

adapter plugs with earthed (grounded) power

tools.

Unmodified plugs and matching outlets will reduce

risk of electric shock.

b) Avoid body contact with earthed or grounded

surfaces, such as pipes, radiators, ranges and

refrigerators.

There is an increased risk of electric shock if your

body is earthed or grounded.

c) Do not expose power tools to rain or wet

conditions.

Water entering a power tool will increase the risk of

electric shock.

d) Do not abuse the cord. Never use the cord for

carrying, pulling or unplugging the power tool.

Keep cord away from heat, oil, sharp edges or

moving parts.

Damaged or entangled cords increase the risk of

electric shock.

e) When operating a power tool outdoors, use an

extension cord suitable for outdoor use.

Use of a cord suitable for outdoor use reduces the

risk of electric shock.

f) If operating a power tool in a damp location is

unavoidable, use a residual current device

(RCD) protected supply.

Use of an RCD reduces the risk of electric shock.

3) Personal safety

a) Stay alert, watch what you are doing and use

common sense when operating a power tool.

Do not use a power tool while you are tired or

under the influence of drugs, alcohol or

medication.

A moment of inattention while operating power tools

may result in serious personal injury.

b) Use personal protective equipment. Always

wear eye protection.

Protective equipment such as a dust mask, non-skid

safety shoes, hard hat or hearing protection used for

appropriate conditions will reduce personal injuries.

c) Prevent unintentional starting. Ensure the

switch is in the off-position before connecting

to power source and/or battery pack, picking

up or carrying the tool.

Carrying power tools with your finger on the switch

or energising power tools that have the switch on

invites accidents.

d) Remove any adjusting key or wrench before

turning the power tool on.

A wrench or a key left attached to a rotating part of

the power tool may result in personal injury.

e) Do not overreach. Keep proper footing and

balance at all times.

This enables better control of the power tool in

unexpected situations.

f) Dress properly. Do not wear loose clothing or

jewellery. Keep your hair and clothing away

from moving parts.

Loose clothes, jewellery or long hair can be caught

in moving parts.

g) If devices are provided for the connection of

dust extraction and collection facilities, ensure

these are connected and properly used.

Use of dust collection can reduce dust-related

hazards.

h) Do not let familiarity gained from frequent use

of tools allow you to become complacent and

ignore tool safety principles.

A careless action can cause severe injury within a

fraction of a second.

4) Power tool use and care

a) Do not force the power tool. Use the correct

power tool for your application.

The correct power tool will do the job better and

safer at the rate for which it was designed.

b) Do not use the power tool if the switch does not

turn it on and off.

Any power tool that cannot be controlled with the

switch is dangerous and must be repaired.

c) Disconnect the plug from the power source

and/ or remove the battery pack, if detachable,

from the power tool before making any

adjustments, changing accessories, or storing

power tools.

Such preventive safety measures reduce the risk of

starting the power tool accidentally.

d) Store idle power tools out of the reach of

children and do not allow persons unfamiliar

with the power tool or these instructions to

operate the power tool.

Power tools are dangerous in the hands of untrained

users.

e) Maintain power tools and accessories. Check

for misalignment or binding of moving parts,

breakage of parts and any other condition that

may affect the power toolʼs operation. If

damaged, have the power tool repaired before

use.

Many accidents are caused by poorly maintained

power tools.

f) Keep cutting tools sharp and clean.

Properly maintained cutting tools with sharp cutting

edges are less likely to bind and are easier to

control.

g) Use the power tool, accessories and tool bits

etc. in accordance with these instructions,

taking into account the working conditions and

the work to be performed.

Use of the power tool for operations different from

those intended could result in a hazardous situation.

h) Keep handles and grasping surfaces dry, clean

and free from oil and grease.

2023/07/19 18:15:57Stylesheet: EU Version: 2023.6.21

C3607DB_C99749581_306_WE_NE_Gre

English

Slippery handles and grasping surfaces do not allow

for safe handling and control of the tool in

unexpected situations.

5) Battery tool use and care

a) Recharge only with the charger specified by the

manufacturer.

A charger that is suitable for one type of battery

pack may create a risk of fire when used with

another battery pack.

b) Use power tools only with specifically

designated battery packs.

Use of any other battery packs may create a risk of

injury and fire.

c) When battery pack is not in use, keep it away

from other metal objects, like paper clips,

coins, keys, nails, screws or other small metal

objects, that can make a connection from one

terminal to another.

Shorting the battery terminals together may cause

burns or a fire.

d) Under abusive conditions, liquid may be

ejected from the battery; avoid contact. If

contact accidentally occurs, flush with water. If

liquid contacts eyes, additionally seek medical

help.

Liquid ejected from the battery may cause irritation

or burns.

e) Do not use a battery pack or tool that is

damaged or modified.

Damaged or modified batteries may exhibit

unpredictable behaviour resulting in fire, explosion

or risk of injury.

f) Do not expose a battery pack or tool to fire or

excessive temperature.

Exposure to fire or temperature above 130°C may

cause explosion.

g) Follow all charging instructions and do not

charge the battery pack or tool outside the

temperature range specified in the instructions.

Charging improperly or at temperatures outside the

specified range may damage the battery and

increase the risk of fire.

6) Service

a) Have your power tool serviced by a qualified

repair person using only identical replacement

parts.

This will ensure that the safety of the power tool is

maintained.

b) Never service damaged battery packs.

Service of battery packs should only be performed

by the manufacturer or authorized service providers.

PRECAUTION

Keep children and infirm persons away.

When not in use, tools should be stored out of reach

of children and infirm persons.

CORDLESS CIRCULAR SAW SAFETY

WARNINGS

Cutting procedures

a) DANGER: Keep hands away from cutting area

and the blade. Keep your second hand on auxiliary

handle, or motor housing.

If both hands are holding the saw, they cannot be cut by

the blade.

b) Do not reach underneath the workpiece.

The guard cannot protect you from the blade below the

workpiece.

c) Adjust the cutting depth to the thickness of the

workpiece.

Less than a full tooth of the blade teeth should be visible

below the workpiece.

d) Never hold the workpiece in your hands or across

your leg while cutting. Secure the workpiece to a

stable platform.

It is important to support the work properly to minimize

body exposure, blade binding, or loss of control.

e) Hold the power tool by insulated gripping

surfaces, when performing an operation where the

cutting tool may contact hidden wiring or its own

cord.

Contact with a “live” wire will also make exposed metal

parts of the power tool “live” and could give the operator

an electric shock.

f) When ripping, always use a rip fence or straight

edge guide.

This improves the accuracy of cut and reduces the

chance of blade binding.

g) Always use blades with correct size and shape

(diamond versus round) of arbour holes.

Blades that do not match the mounting hardware of the

saw will run off-centre, causing loss of control.

h) Never use damaged or incorrect blade washers or

bolt.

The blade washers and bolt were specially designed for

your saw, for optimum performance and safety of

operation.

Kickback causes and related warnings

– kickback is a sudden reaction to a pinched, jammed or

misaligned saw blade, causing an uncontrolled saw to

lift up and out of the workpiece toward the operator;

– when the blade is pinched or jammed tightly by the kerf

closing down, the blade stalls and the motor reaction

drives the unit rapidly back toward the operator;

– if the blade becomes twisted or misaligned in the cut,

the teeth at the back edge of the blade can dig into the

top surface of the wood causing the blade to climb out

of the kerf and jump back toward the operator.

Kickback is the result of saw misuse and/or incorrect

operating procedures or conditions and can be avoided by

taking proper precautions as given below.

a) Maintain a firm grip with both hands on the saw

and position your arms to resist kickback forces.

Position your body to either side of the blade, but

not in line with the blade.

Kickback could cause the saw to jump backwards, but

kickback forces can be controlled by the operator, if

proper precautions are taken.

b) When blade is binding, or when interrupting a cut

for any reason, release the trigger and hold the

saw motionless in the material until the blade

comes to a complete stop.

Never attempt to remove the saw from the work or

pull the saw backward while the blade is in motion

or kickback may occur.

Investigate and take corrective actions to eliminate the

cause of blade binding.

c) When restarting a saw in the workpiece, centre the

saw blade in the kerf so that the saw teeth are not

engaged into the material.

If a saw blade binds, it may walk up or kickback from

the workpiece as the saw is restarted.

d) Support large panels to minimise the risk of blade

pinching and kickback.

2023/07/19 18:15:57Stylesheet: EU Version: 2023.6.21

C3607DB_C99749581_306_WE_NE_Gre

English

Large panels tend to sag under their own weight.

Supports must be placed under the panel on both

sides, near the line of cut and near the edge of the

panel.

e) Do not use dull or damaged blades.

Unsharpened or improperly set blades produce narrow

kerf causing excessive friction, blade binding and

kickback.

f) Blade depth and bevel adjusting locking levers

must be tight and secure before making the cut.

If blade adjustment shifts while cutting, it may cause

binding and kickback.

g) Use extra caution when sawing into existing walls

or other blind areas.

The protruding blade may cut objects that can cause

kickback.

Lower guard function

a) Check the lower guard for proper closing before

each use. Do not operate the saw if the lower

guard does not move freely and close instantly.

Never clamp or tie the lower guard into the open

position.

If the saw is accidentally dropped, the lower guard may

be bent.

Raise the lower guard with the retracting handle and

make sure it moves freely and does not touch the blade

or any other part, in all angles and depths of cut.

b) Check the operation of the lower guard spring. If

the guard and the spring are not operating

properly, they must be serviced before use.

Lower guard may operate sluggishly due to damaged

parts, gummy deposits, or a build-up of debris.

c) The lower guard may be retracted manually only

for special cuts such as “plunge cuts” and

“compound cuts”. Raise the lower guard by the

retracting handle and as soon as the blade enters

the material, the lower guard must be released.

For all other sawing, the lower guard should operate

automatically.

d) Always observe that the lower guard is covering

the blade before placing the saw down on bench

or floor.

An unprotected, coasting blade will cause the saw to

walk backwards, cutting whatever is in its path. Be

aware of the time it takes for the blade to stop after

switch is released.

ADDITIONAL SAFETY WARNINGS

1. Wear earplugs to protect your ears during operation.

2. Use only blade diameter specified on the machine.

3. Do not use any abrasive wheel.

4. Do not use saw blades which are deformed or cracked.

5. Do not use saw blades made of high speed steel.

6. Do not use saw blades which do not comply with the

characteristics specified in these instructions.

7. Do not stop the saw blades by lateral pressure on the

disc.

8. Always keep the saw blades sharp.

9. Ensure that the lower guard moves smoothly and freely.

10. Never use the circular saw with its lower guard fixed in

the open position.

11. Ensure that the retraction mechanism of the guard

system operates correctly.

12. Never operate the circular saw with the saw blade

turned upward or to the side.

13. Ensure that the material is free of foreign matters such

as nails.

14. The saw blades range should be from 190mm to

180mm.

15. Pull out battery before carrying out any adjustment,

servicing or maintenance.

16. Be careful of brake kickback.

This circular saw features an electric brake that

functions when the switch is released. As there is some

kickback when the brake functions, be sure to hold the

main body securely.

17. Ensure that the switch is in the OFF position. If the

battery installed to power tool while the switch is in the

ON position, the power tool will start operating

immediately, which could cause a serious accident.

18. Avoid cutting in the state where the base has floated up

from the material.

When blade is binding, or when interrupting a cut for

any reason, release the trigger and hold the saw

motionless in the material until the blade comes to a

complete stop. Never attempt to remove the saw from

the work or pull the saw backward while the blade is in

motion or KICKBACK may occur. Investigate and take

corrective actions to eliminate the cause of blade

binding.

19. Support large panels to minimize the risk of blade

pinching and KICKBACK. Large panels tend to sag

under their own weight (Fig.3). Supports must be

placed under the panel on both sides, near the line of

cut and near the edge of the panel as shown in Fig.2.

To minimize the risk of blade pinching and kickback.

When cutting operation requires the resting of the saw

on the work piece, the saw shall be rested on the larger

portion and the smaller piece cut off.

20. Use extra caution when making a “Pocket Cut” into

existing walls or other blind areas. The protruding blade

may cut objects that can cause KICKBACK.

NEVER place your hand or fingers behind the saw

(Fig.4). If kickback occurs, the saw could easily jump

backwards over your hand, possibly causing severe

injury.

21. WARNING: It is important to support the work piece

properly and to hold the saw firmly to prevent loss of

control which could cause personal injury. Fig.5

illustrates typical hand support of the saw.

22. Place the wider portion of the saw base on that part of

the work piece which is solidly supported, not on the

section that will fall off when the cut is made. As

examples, Fig.6 illustrates the RIGHT way to cut off the

end of board, and Fig.7 the WRONG way. If the work

piece is short or small, clamp it down. DON’T TRY TO

HOLD SHORT PLACES BY HAND!

23. Never attempt to saw with the circular saw held upside

down in a vise.

This is extremely dangerous and can lead to serious

accidents. (Fig.8)

24. When using the guide, do not attempt an inclined cut

which would allow the cut material to slip between the

saw blade and guide. Doing so could result in injury.

(Fig.9)

25. Should lever remain loosened, it will create a very

hazardous situation. Always thoroughly clamp it.

(Fig.12)

26. It is very hazardous to allow the incline lever to remain

loosened. Always thoroughly clamp it. (Fig.13)

27. Prior to cutting operation, make sure the material you

are going to cut. If the material to be cut is expected to

generate harmful / toxic dusts, make sure the dust bag

or appropriate dust extraction system is connected with

dust outlet tightly.

Wear the dust mask additionally, if available.

○ Before starting to saw, confirm that the saw blade has

attained full-speed revolution.

○ Should the saw blade stop or make an abnormal noise

while operating, promptly turn OFF the switch.

2023/07/19 18:15:57Stylesheet: EU Version: 2023.6.21

C3607DB_C99749581_306_WE_NE_Gre

English

○ Using the circular saw with the saw blade facing

upwards or sideways is very hazardous. Such

uncommon applications should be avoided.

○ When cutting materials, always wear protective

glasses.

○ When finished with a job, pull out the battery.

28. After having attached the saw blade, reconfirm that the

lock lever is firmly secured in the prescribed position.

29. Do not use the tool with only the blower function.

30. Use a saw blade that is for cutting wood.

31. Use a saw blade with a displayed speed that is equal to

or higher than the rotation speed displayed on the tool.

32. Use a saw blade that complies with EN847-1.

33. Do not expose directly your eye to the light by looking

into the light.

If your eye is continuously exposed to the light, your eye

will be hurt.

Wipe off any dirt or grime attached to the lens of the

LED light with a soft cloth, being careful not to scratch

the lens.

Scratches on the lens of the LED light can result in

decreased brightness.

34. Do not give a strong shock to the switch panel or break

it. It may lead to a trouble.

35. Always charge the battery at a temperature of 0°C–

40°C. A temperature of less than 0°C will result in over

charging which is dangerous. The battery cannot be

charged at a temperature higher than 40°C. The most

suitable temperature for charging is that of 20°C–25°C.

36. Do not use the charger continuously.

When one charging is completed, leave the charger for

about 15minutes before the next charging of battery.

37. Do not allow foreign matter to enter the hole for

connecting the rechargeable battery.

38. Never disassemble the rechargeable battery and

charger.

39. Never short-circuit the rechargeable battery. Short-

circuiting the battery will cause a great electric current

and overheat. It results in burn or damage to the

battery.

40. Do not dispose of the battery in fire. If the battery is

burnt, it may explode.

41. Bring the battery to the shop from which it was

purchased as soon as the post-charging battery life

becomes too short for practical use. Do not dispose of

the exhausted battery.

42. Do not insert objects into the air ventilation slots of the

charger.

Inserting metal objects or inflammables into the charger

air ventilation slots will result in electrical shock hazard

or a damaged charger.

43. When using this unit continuously, the unit may

overheat, leading to damage in the motor and switch.

Therefore, whenever the housing becomes hot, give the

tool a break for a while.

44. Make sure that the battery is installed firmly. If it is at all

loose it could come off and cause an accident.

45. Do not use the product if the tool or the battery

terminals (battery mount) are deformed.

Installing the battery could cause a short circuit that

could result in smoke emission or ignition.

46. Keep the tool’s terminals (battery mount) free of swarf

and dust.

○ Prior to use, make sure that swarf and dust have not

collected in the area of the terminals.

○ During use, try to avoid swarf or dust on the tool from

falling on the battery.

○ When suspending operation or after use, do not leave

the tool in an area where it may be exposed to falling

swarf or dust.

Doing so could cause a short circuit that could result in

smoke emission or ignition.

47. Always use the tool and battery at temperatures

between -5°C and 40°C.

CAUTION ON LITHIUM-ION BATTERY

To extend the lifetime, the lithium-ion battery equips with

the protection function to stop the output.

In the cases of 1 to 3 described below, when using this

product, even if you are pulling the switch, the motor may

stop. This is not the trouble but the result of protection

function.

1. When the battery power remaining runs out, the motor

stops.

In such a case, charge it up immediately.

2. If the tool is overloaded, the motor may stop. In this

case, release the switch of tool and eliminate causes of

overloading. After that, you can use it again.

3. If the battery is overheated under overload work, the

battery power may stop.

In this case, stop using the battery and let the battery

cool. After that, you can use it again.

Furthermore, please heed the following warning and

caution.

WARNING

In order to prevent any battery leakage, heat generation,

smoke emission, explosion and ignition beforehand, please

be sure to heed the following precautions.

1. Make sure that swarf and dust do not collect on the

battery.

○ During work make sure that swarf and dust do not fall

on the battery.

○ Make sure that any swarf and dust falling on the power

tool during work do not collect on the battery.

○ Do not store an unused battery in a location exposed to

swarf and dust.

○ Before storing a battery, remove any swarf and dust

that may adhere to it and do not store it together with

metal parts (screws, nails, etc.).

2. Do not pierce battery with a sharp object such as a nail,

strike with a hammer, step on, throw or subject the

battery to severe physical shock.

3. Do not use an apparently damaged or deformed

battery.

4. Do not use the battery for a purpose other than those

specified.

5. If the battery charging fails to complete even when a

specified recharging time has elapsed, immediately

stop further recharging.

6. Do not put or subject the battery to high temperatures or

high pressure such as into a microwave oven, dryer, or

high pressure container.

7. Keep away from fire immediately when leakage or foul

odor are detected.

8. Do not use in a location where strong static electricity

generates.

9. If there is battery leakage, foul odor, heat generated,

discolored or deformed, or in any way appears

abnormal during use, recharging or storage,

immediately remove it from the equipment or battery

charger, and stop use.

10. Do not immerse the battery or allow any fluids to flow

inside. Conductive liquid ingress, such as water, can

cause damage resulting in fire or explosion. Store your

battery in a cool, dry place, away from combustible and

flammable items. Corrosive gas atmospheres must be

avoided.

11. Do not give a strong shock to the display panel or break

it. It may lead to a trouble.

2023/07/19 18:15:57Stylesheet: EU Version: 2023.6.21

C3607DB_C99749581_306_WE_NE_Gre

English

CAUTION

1. If liquid leaking from the battery gets into your eyes, do

not rub your eyes and wash them well with fresh clean

water such as tap water and contact a doctor

immediately.

If left untreated, the liquid may cause eye-problems.

2. If liquid leaks onto your skin or clothes, wash well with

clean water such as tap water immediately.

There is a possibility that this can cause skin irritation.

3. If you find rust, foul odor, overheating, discolor,

deformation, and/or other irregularities when using the

battery for the first time, do not use and return it to your

supplier or vendor.

WARNING

If a conductive foreign matter enters in the terminal of

lithium ion battery, the battery may be shorted, causing fire.

When storing the lithium ion battery, obey surely the rules

of following contents.

○ Do not place conductive debris, nail and wires such as

iron wire and copper wire in the storage case.

○ To prevent shorting from occurring, load the battery in

the tool or insert securely the battery cover for storing

until the ventilator is not seen.

REGARDING LITHIUM-ION BATTERY

TRANSPORTATION

When transporting a lithium-ion battery, please observe the

following precautions.

WARNING

Notify the transporting company that a package contains a

lithium-ion battery, inform the company of its power output

and follow the instructions of the transportation company

when arranging transport.

○ Lithium-ion batteries that exceed a power output of

100Wh are considered to be in the freight classification

of Dangerous Goods and will require special application

procedures.

○ For transportation abroad, you must comply with

international law and the rules and regulations of the

destination country.

Power Output

2 to 3 digit number

USB DEVICE CONNECTION

PRECAUTIONS (UC18YSL3)

When an unexpected problem occurs, the data in a USB

device connected to this product may be corrupted or lost.

Always make sure to back up any data contained in the

USB device prior to use with this product.

Please be aware that our company accepts absolutely no

responsibility for any data stored in a USB device that is

corrupted or lost, nor for any damage that may occur to a

connected device.

WARNING

○ Prior to use, check the connecting USB cable for any

defect or damage.

Using a defective or damaged USB cable can cause

smoke emission or ignition.

○ When the product is not being used, cover the USB port

with the rubber cover.

Buildup of dust etc. in the USB port can cause smoke

emission or ignition.

NOTE

○ There may be an occasional pause during USB

recharging.

○ When a USB device is not being charged, remove the

USB device from the charger.

Failure to do so may not only reduce the battery life of a

USB device, but may also result in unexpected

accidents.

○ It may not be possible to charge some USB devices,

depending on the type of device.

NAMES OF PARTS

The numbers in the list below correspond to Fig.1–Fig.30.

1Switch

2Switch lock

3Saw cover

4Lower guard lever

5M7 bolt

6Washer (B)

7Saw blade

8Lower guard

9Base

10 Incline lever

11 Inclined gauge

12 Handle

13 Hook

14 Sub handle

15 Lock lever

16 LED light

17 5 mm Hex. bar wrench

18 Battery

19 Charge indicator lamp

20 Square

21 Hex. socket set screw

22 3 mm Hex. bar wrench

23 Lever

24 Premarked line

25 Front scale at 45° incline

26 Front scale when not inclined

27 Mode selector switch

28 Mode Indicator lamp

29 Dust collector

30 M4 Screw

2023/07/19 18:15:57Stylesheet: EU Version: 2023.6.21

C3607DB_C99749581_306_WE_NE_Gre

English

31 Guide fastener wing-bolt

32 Lock spring

33 Guide

34 Guide rail adapter

35 Slots next to base

36 Wing bolt (for attaching guide rail adapter)

37 Spring

38 Wing bolt (in front for adjustment of guide rail

adapter)

39 Wing bolt (in rear for adjustment of guide rail

adapter)

40 Notch of guide bar

41 End of spring plate

42 Guide rail plate

43 Guide rail

44 Rubber lip

45 Lumber

46 Latch

47 Washer (A)

48 Concave side

49 Battery level indicator switch

50 Battery level indicator lamp

51 Display panel

SYMBOLS

WARNING

The following show symbols used for the machine.

Be sure that you understand their meaning before

use.

C3607DB: Cordless Circular Saw

To reduce the risk of injury, user must read

instruction manual.

Always wear eye protection.

Always wear hearing protection.

Only for EU countries

Do not dispose of electric tools together with

household waste material!

In observance of European Directive

2012/19/EU on waste electrical and electronic

equipment and its implementation in

accordance with national law, electric tools that

have reached the end of their life must be

collected separately and returned to an

environmentally compatible recycling facility.

Rated voltage

No-load speed

Switching ON

Switching OFF

Disconnect the battery

Prohibited action

High Torque mode is selected

Auto Switch mode is selected

Blower

Warning

Battery

Lights ;

The battery remaining power is over 75%.

Lights ;

The battery remaining power is 50%–75%.

Lights ;

The battery remaining power is 25%–50%.

Lights ;

The battery remaining power is less than 25%.

Blinks ;

The battery remaining power is nearly empty.

Recharge the battery soonest possible.

Blinks ;

Output suspended due to high temperature.

Remove the battery from the tool and allow it to

fully cool down.

Blinks ;

Output suspended due to failure or malfunction.

The problem may be the battery so please

contact your dealer.

2023/07/19 18:15:57Stylesheet: EU Version: 2023.6.21

C3607DB_C99749581_306_WE_NE_Gre

English

STANDARD ACCESSORIES

In addition to the main unit (1 unit), the package contains

the accessories listed on page152.

Standard accessories are subject to change without notice.

APPLICATIONS

Cutting various types of wood.

SPECIFICATIONS

1. Power tool

Model C3607DB

Voltage 36 V

No-load speed

6000 min-1

(Auto Switch mode)

4500 min-1

(High Torque mode)

Blade external dia. 190 mm

Blade hole dia. 30 mm

Capacity Cutting

depth

90° 64.5 mm

45° 49 mm

Battery available for this

tool*1

Multi volt battery /

AC/DC Adapter

(sold separately)

Weight*24.3 kg (BSL36A18X)

4.6 kg (BSL36B18X)

*1 Existing batteries (BSL3660/3620/3626, BSL18 series,

etc.) cannot be used with this tool.

If using the AC/DC Adapter, please read and

understand its manual before operating the power tool.

*2 According to EPTA-Procedure 01/2014

NOTE

Due to HiKOKI’s continuing program of research and

development, the specifications herein are subject to

change without prior notice.

Electronic control

○ Soft-start

○ Brake function

Battery; Small counter-force

AC/DC Adapter; Large counter-force

– Please be aware that the counter-force of the brake

differs depending on the battery being used.

○ Overload protection

This protection feature cuts off the power to the motor in

the event of overloading of motor or a conspicuous

reduction in rotational speed during operation.

When the overload protection feature has been

activated, the motor may stop.

In this case, release the tool switch and eliminate

causes of overloading.

After that you can use it again.

○ Overheat protection

This protection feature cuts off the power to the motor

and stops the power tool in the event of overheating of

motor during operation.

When the overheat protection feature has been

activated, the motor may stop.

In this case, release the tool switch and cool it down in a

few minutes.

After that you can use it again.

○ Rotation speed changeover function (Auto Switch

mode / High Torque mode)

○ Precaution for continuous cutting

When using AC/DC Adapter if the switch is repeatedly

switched ON and OFF during a short period of time

while in the Auto Switch mode, the tool will be stopped

early by the overheat protection feature. When that

happens, using the High Torque mode is

recommended.

2. Battery

Model Voltage Battery capacity

BSL36A18X 36 / 18 V*12.5 / 5.0 Ah*1

*1 The tool itself will automatically switch over.

CHARGING

Before using the power tool, charge the battery as follows.

1. Connect the charger’s power cord to the

receptacle.

When connecting the plug of the charger to a

receptacle, the charge indicator lamp will blink in red.

(See Table1)

2. Insert the battery into the charger.

Firmly insert the battery into the charger as shown in

Fig.10 (on page 3).

3. Charging

When inserting a battery in the charger, charging will

commence and the charge indicator lamp will blink in

blue.

When the battery becomes fully recharged, the charge

indicator lamp will light up in green. (See Table1)

(1) Charge indicator lamp indication

The indications of the charge indicator lamp will be as

shown in Table1, according to the condition of the

charger or the rechargeable battery.

Table 1: Indications of the charge indicator lamp

ON/OFF at 0.5sec. intervals

(RED) Before charging *1

Lights for 0.5sec. at intervals of

1sec. (BLUE) Charged at less than

50%

Lights for 1sec. at intervals of

0.5sec. (BLUE) Charged at less than

80%

Lights continuously (BLUE) Charged at more

than 80%

Lights continuously (Continuous

buzzer sound: about 6sec.)

(GREEN) Charging complete

ON/OFF at 0.3sec. intervals

(RED) Overheat standby *2

2023/07/19 18:15:57Stylesheet: EU Version: 2023.6.21

C3607DB_C99749581_306_WE_NE_Gre

English

ON/OFF at 0.1sec. intervals

(Intermittent buzzer sound:

about 2sec.) (PURPLE) Charging impossible

NOTE

*1 If the red lamp continues to blink even after the charger

has been attached, check to confirm that the battery

has been fully inserted.

*2 Battery overheated. Unable to charge.

Although charging will start once the battery has cooled

down even when left in situ, the best practice is to

remove the battery and allow it to cool down in a

shaded, well-ventilated location before charging.

*3 Malfunction in the battery or the charger

– Fully insert the battery.

– Check to confirm that no foreign matter is stuck to

the battery mount or terminals. If there are no

foreign objects, it is probable that the battery or

charger is malfunctioning. Take it to your authorized

Service Center.

○ When the battery charger has been continuously used,

the battery charger will be heated, thus constituting the

cause of the failures. Once the charging has been

completed, give 5minutes rest until the next charging.

(2) Regarding the temperatures and charging time of the

battery (See Table2)

Table 2

Model UC18YSL3

Type of battery Li-ion

Charging voltage 14.4–18 V

Temperatures at which the

battery can be recharged 0°C–50°C

Charging time for

battery capacity,

approx. (At 20°C)

1.5Ah 15min

2.0Ah 20min

2.5Ah 25min

3.0Ah 20min

(BSL1430C,BSL1830C:

30min)

4.0Ah 26 min

(BSL1840M: 40min)

5.0Ah 32min

6.0Ah 38min

Charging time for

multi volt battery

capacity, approx.

(At 20°C)

1.5Ah

(×2unit) 20min

2.5Ah

(×2unit) 32min

4.0Ah

(×2unit) 52min

Number of battery cells 4–10

Charging voltage for USB 5V

Charging current for USB 2A

Weight 0.6kg

NOTE

○ The recharging time may vary according to the ambient

temperature and power source voltage.

○ If charging takes a long time

– Charging will take longer at extremely low ambient

temperatures. Charge the battery in a warm location

(such as indoors).

– Do not block the air vent. Otherwise the interior will

overheat, reducing the charger's performance.

– If the cooling fan is not operating, contact a HiKOKI

Authorized Service Center for repairs.

4. Disconnect the charger’s power cord from the

receptacle.

5. Hold the charger firmly and pull out the battery.

NOTE

Be sure to pull out the battery from the charger after

use, and then keep it.

Regarding electric discharge in case of new

batteries, etc.

As the internal chemical substance of new batteries and

batteries that have not been used for an extended period is

not activated, the electric discharge might be low when

using them the first and second time. This is a temporary

phenomenon, and normal time required for recharging will

be restored by recharging the batteries 2–3 times.

How to make the batteries perform longer.

(1) Recharge the batteries before they become completely

exhausted. When you feel that the power of the tool

becomes weaker, stop using the tool and recharge its

battery. If you continue to use the tool and exhaust the

electric current, the battery may be damaged and its life

will become shorter.

(2) Avoid recharging at high temperatures. A rechargeable

battery will be hot immediately after use. If such a

battery is recharged immediately after use, its internal

chemical substance will deteriorate, and the battery life

will be shortened. Leave the battery and recharge it

after it has cooled for a while.

MOUNTING AND OPERATION

Action Figure Page

Inclined cutting using the guide

(+45° direction) (sold separately) 9 3

Charging 10 3

Adjusting the base and saw blade to

maintain perpendicularity 11 3

Adjusting the cutting depth 12 3

Adjusting the angle of inclination 13 3

Cutting line 14 4

Switch operation 15 4

How to use the LED light*116 4

About the mode select function*217 4

Mounting the dust collector set 18 4

How to use the hook*319 4

Attaching the guide (sold separately) 20 5

2023/07/19 18:15:57Stylesheet: EU Version: 2023.6.21

C3607DB_C99749581_306_WE_NE_Gre

English

Action Figure Page

Attaching the guide rail adapter 21 5

How to use the guide rail *422 5

Removing and inserting the battery 23 6

Cutting (Do not use the tool with only

the blower function.) 24 6

Dismounting the saw blade 25 6

Mounting the saw blade 26 7

Remaining battery indicator 27 7

Charging a USB device from a

electrical outlet 28-a 7

Charging a USB device and battery

from a electrical outlet 28-b 7

How to recharge USB device 29 7

When charging of USB device is

completed 30 7

Selecting accessories — 153

*1 How to use the LED light

This product features LED interlock function that means

the LED will turn ON / OFF automatically depending on

the product's power ON / OFF.

*2 About the mode select function

Each time the mode selector switch is pushed, the

operation mode changes.

When the High Torque mode is selected, the mode

selector lamp lights up.

The High Torque mode reduces maximum motor RPM

enabling efficient work.

If the load increases while the motor is operating in the

Auto Switch mode, it automatically changes to the High

Torque mode.

Additionally, if the load decreases again, it

automatically returns to the Auto Switch mode.

In the High Torque mode, it does not change to the

Auto Switch mode even when the load decreases.

Mode No-load speed

Auto Switch 6000 min-1

High Torque 4500 min-1

NOTE

○ The mode will only change after a battery is installed

and the switch is pulled once.

○ The current mode will be maintained even if the switch

is on/off, or the battery is removed/reinserted.

*3 How to use the hook

The hook can be used to hang up the unit temporarily

during operations.

CAUTION

○ When using the hook, check to make sure that the main

unit will not slip and fall, or become unstable by the

wind, etc.

○ Never hang the unit from your belt or trousers as this

could cause accidents.

*4 How to use the guide rail

Before use, ensure that the chip saw and the aluminum

parts of the guide rail do not make contact with each

other.

In new condition, the outside edge of the rubber lip

protrudes slightly beyond the cutting track of the circular

saw blade.

When using the guide rail for the first time, cut this

protruding section as follows: Set the circular saw’s

cutting depth to the maximum and the saw blade angle

to perpendicular (0°). Pull the switch completely, and

cut the rubber lip slowly, constant speed with using the

guide rail.

To avoid tearing, the rubber lip should lie completely on

a support (workpiece). The edge of the rubber lip is

then cutting edge of the workpiece.

After the protruding section is cut, it can also be used

for bevel cutting.

NOTE

Use a guide rail that is manufactured by metabo. If

another company’s guide rail is used, it may not align

with metabo’s scale markings for 0° and 45°.

LED LIGHT WARNING SIGNALS

This product features functions that are designed to protect

the tool itself as well as the battery. If any of the safeguard

functions are triggered during operation, the LED light will

blink as described in Table3.

When any of the safeguard functions are triggered,

immediately remove your finger from the switch and follow

the instructions described under corrective action.

Table 3

LED Light Display Safeguard Function

On 0.1second/off

0.1second Overburden Protection

Remove the cause of the

overloading.

On 0.5 second/

Off 0.5second Temperature protection

Allow the tool and battery to

thoroughly cool.

MAINTENANCE AND INSPECTION

1. Inspecting the saw blade

Since use of as dull saw blade will degrade efficiency

and cause possible motor malfunction, sharpen or

replace the saw blade as soon as abrasion is noted.

2. Inspecting the mounting screws

Regularly inspect all mounting screws and ensure that

they are properly tightened. Should any of the screws

be loose, retighten them immediately. Failure to do so

could result in serious hazard.

3. Motor unit maintenance

The motor winding is an important part of this tool.

Avoid damaging and be careful to avoid contact with

cleaning oil or water.

After 50 hours of use, clean the motor by blowing into

the ventilation holes of the motor housing with dry air

from an air gun or other tool (Fig.31).

Dust or particle accumulation in the motor can result in

damage.

4. Inspecting and maintaining the lower guard

Always make sure that the lower guard moves

smoothly.

In the event of any malfunction, immediately repair the

lower guard.

For cleaning and maintenance, use an air gun or other

tool to blow clean the space between the lower guard

and gear cover as well as the rotation part of the lower

guard with dry air (Fig.31).

2023/07/19 18:15:57Stylesheet: EU Version: 2023.6.21

C3607DB_C99749581_306_WE_NE_Gre

English

Doing so is effective for the emission of chips or other

particles.

Accumulation of chips or other particles around the

lower guard may result in malfunction or damage.

WARNING

To prevent dust inhalation or eye irritation, wear

protective safety goggles and a dust mask when using

an air gun or other tool to clean the lower guard,

ventilation holes or other parts of the product.

Ensure smooth movement of

lower guard

Space between

lower guard and gear

cover Air gun

Rotation part of the

lower guard

Housing vent

Fig.31

5. Cleaning the inside of the saw cover

Regularly check and clean to make sure that sawdust

and other residue do not collect inside of the saw cover.

Always remove the saw blade when checking and

cleaning.

6. Inspection of terminals (tool and battery)

Check to make sure that swarf and dust have not

collected on the terminals.

On occasion check prior, during and after operation.

CAUTION

Remove any swarf or dust which may have collected on

the terminals.

Failure to do so may result in malfunction.

7. Cleaning on the outside

When the power tool is stained, wipe with a soft dry

cloth or a cloth moistened with soapy water. Do not use

chloric solvents, gasoline or paint thinner, for they melt

plastics.

8. Storage

Store the power tool and battery in a place in which the

temperature is less than 40°C and out of reach of

children.

NOTE

Storing lithium-ion batteries.

Make sure the lithium-ion batteries have been fully

charged before storing them.

Prolonged storage (3 months or more) of batteries with

a low charge may result in performance deterioration,

significantly reducing battery usage time or rendering

the batteries incapable of holding a charge.

However, significantly reduced battery usage time may

be recovered by repeatedly charging and using the

batteries two to five times.

If the battery usage time is extremely short despite

repeated charging and use, consider the batteries dead

and purchase new batteries.

CAUTION

In the operation and maintenance of power tools, the

safety regulations and standards prescribed in each

country must be observed.

Important notice on the batteries for the HiKOKI

cordless power tools

Please always use one of our designated genuine

batteries. We cannot guarantee the safety and

performance of our cordless power tool when used with

batteries other than these designated by us, or when the

battery is disassembled and modified (such as

disassembly and replacement of cells or other internal

parts).

GUARANTEE

We guarantee HiKOKI Power Tools in accordance with

statutory/country specific regulation. This guarantee does

not cover defects or damage due to misuse, abuse, or

normal wear and tear. In case of complaint, please send

the Power Tool, undismantled, with the GUARANTEE

CERTIFICATE found at the end of this Handling

instruction, to a HiKOKI Authorized Service Center.

Information concerning airborne noise and vibration

The measured values were determined according to

EN62841 and declared in accordance with ISO 4871.

Measured A-weighted sound power level: 106dB(A)

Measured A-weighted sound pressure level: 98dB(A)

Uncertainty K: 3 dB (A).

Wear hearing protection.

Vibration total values (triax vector sum) determined

according to EN62841.

Cutting chipboard:

Vibration emission value

= 1.8m/s2

Uncertainty K = 1.5m/s2

The declared vibration total value and the declared noise

emission value have been measured in accordance with a

standard test method and may be used for comparing one

tool with another.

They may also be used in a preliminary assessment of

exposure.

WARNING

○ The vibration and noise emission during actual use of

the power tool can differ from the declared total value

depending on the ways in which the tool is used

especially what kind of workpiece is processed; and

○ Identify safety measures to protect the operator that are

based on an estimation of exposure in the actual

conditions of use (taking account of all parts of the

operating cycle such as the times when the tool is

switched off and when it is running idle in addition to the

trigger time).

NOTE

Due to HiKOKI’s continuing program of research and

development, the specifications herein are subject to

change without prior notice.

2023/07/19 18:15:57Stylesheet: EU Version: 2023.6.21

C3607DB_C99749581_306_WE_NE_Gre

English

TROUBLESHOOTING

Use the inspections in the table below if the tool does not operate normally. If this does not remedy the problem, consult

your dealer or the HiKOKI Authorized Service Center.

Symptom Possible cause Remedy

Tool doesn’t run No remaining battery power Charge the battery.

The trigger switch was held down

while the battery was inserted. The safety function was activated.

If the trigger switch is released once

and then pulled again, the tool will

run.

Battery isn’t fully installed. Push the battery in until you hear a

click.

Tool suddenly stopped Tool was overburdened Get rid of the problem causing the

overburden.

Overload protection is in operation.

The battery is overheated. Let the battery cool down.

The trigger switch was held down for

5minutes or more. This is not a malfunction.

The motor was automatically stopped

to prevent failure of the tool.

Cannot be inclined The incline lever is not loosened. Try inclining after loosening the

incline lever.

Tighten the incline lever after making

the necessary adjustments.

Doesn’t cut well The saw blade is worn or missing

teeth. Replace with a new saw blade.

The bolt is loose. Firmly tighten the bolt.

The saw blade is installed

backwards. Install the saw blade in the proper

direction.

Switch can’t be pulled The switch lock is not pushed in

enough. Push the switch lock in all the way.

Sawdust discharge is poor Sawdust has accumulated in the saw

cover. Remove the sawdust inside the saw

cover.

Battery cannot be installed. Attempting to install a battery other

than that specified for the tool. Please install a multi volt type battery.

2023/07/19 18:15:57Stylesheet: EU Version: 2023.6.21

C3607DB_C99749581_306_WE_NE_Gre

Deutsch

(Übersetzung der Original-Gebrauchsanweisung)

ALLGEMEINE

SICHERHEITSHINWEISE FÜR

ELEKTROGERÄTE

WARNUNG

Bitte beachten Sie sämtliche mit diesem Elektrogerät

gelieferten Sicherheitshinweise, Anweisungen,

Illustrationen und technischen Angaben.

Wenn die nachfolgenden Anweisungen nicht befolgt

werden, kann es zu Stromschlag, Brand und/oder

ernsthaften Verletzungen kommen.

Bitte bewahren Sie alle Warnhinweise und

Anweisungen zum späteren Nachschlagen auf.

Der Begriff „Elektrowerkzeug“ bezieht sich in den

Warnhinweisen auf Elektrowerkzeuge mit Netz-

(schnurgebunden) oder Akkubetrieb (schnurlos).

1) Sicherheit im Arbeitsbereich

a) Sorgen Sie für einen sauberen und gut

ausgeleuchteten Arbeitsbereich.

Zugestellte oder dunkle Bereiche ziehen Unfälle

förmlich an.

b) Verwenden Sie Elektrowerkzeuge niemals an

Orten, an denen Explosionsgefahr besteht, wie

zum Beispiel in der Nähe von leicht

entflammbaren Flüssigkeiten, Gasen oder

Stäuben.

Bei der Arbeit mit Elektrowerkzeugen kann es zu

Funkenbildung kommen, wodurch sich Stäube oder

Dämpfe entzünden können.

c) Sorgen Sie bei der Arbeit mit

Elektrowerkzeugen dafür, dass sich keine

Zuschauer (insbesondere Kinder) in der Nähe

befinden.

Wenn Sie abgelenkt werden, können Sie die

Kontrolle über das Werkzeug verlieren.

2) Elektrische Sicherheit

a) Elektrowerkzeuge müssen mit passender

Stromversorgung betrieben werden. Nehmen

Sie niemals irgendwelche Änderungen am

Anschlussstecker vor. Verwenden Sie bei

Elektrowerkzeugen mit Schutzkontakt (geerdet)

niemals Adapterstecker.

Stecker im Originalzustand und passende

Steckdosen reduzieren das Stromschlagrisiko.

b) Vermeiden Sie Körperkontakt mit geerdeten

Gegenständen wie Rohrleitungen, Heizungen,

Herden oder Kühlschränken.

Bei Körperkontakt mit geerdeten Gegenständen

besteht ein erhöhtes Stromschlagrisiko.

c) Setzen Sie Elektrowerkzeuge niemals Regen

oder sonstiger Feuchtigkeit aus.

Wenn Flüssigkeiten in ein Elektrowerkzeug

eindringen, erhöht sich das Stromschlagrisiko.

d) Verwenden Sie das Anschlusskabel nicht

missbräuchlich. Tragen Sie das

Elektrowerkzeug niemals am Stromkabel,

ziehen Sie es nicht damit heran und ziehen Sie

den Stecker nicht am Anschlusskabel aus der

Steckdose. Halten Sie das Anschlusskabel von

Hitzequellen, Öl, scharfen Kanten und

beweglichen Teilen fern.

Beschädigte oder verdrehte Anschlusskabel

erhöhen das Stromschlagrisiko.

e) Verwenden Sie, wenn Sie ein Elektrowerkzeug

im Freien benutzen, ein für den Außeneinsatz

geeignetes Verlängerungskabel.

Ein für den Außeneinsatz geeignetes Kabel

vermindert das Stromschlagrisiko.

f) Falls sich der Betrieb des Elektrowerkzeugs in

feuchter Umgebung nicht vermeiden lässt,

verwenden Sie eine Stromversorgung mit

Fehlerstromschutzeinrichtung (Residual

Current Device, RCD).

Durch den Einsatz einer

Fehlerstromschutzeinrichtung wird das Risiko eines

elektrischen Schlages reduziert.

3) Persönliche Sicherheit

a) Bleiben Sie wachsam, achten Sie auf das, was

Sie tun, und setzen Sie Ihren Verstand ein,

wenn Sie mit Elektrowerkzeugen arbeiten.

Benutzen Sie keine Elektrowerkzeuge, wenn

Sie müde sind oder unter Einfluss von Drogen,

Alkohol oder Medikamenten stehen.

Bei der Arbeit mit Elektrowerkzeugen können

bereits kurze Phasen der Unaufmerksamkeit zu

schweren Verletzungen führen.

b) Benutzen Sie eine persönliche

Schutzausrüstung. Tragen Sie immer einen

Augenschutz.

Schutzausrüstung wie Staubmaske, rutschfeste

Sicherheitsschuhe, Schutzhelm und Gehörschutz

senken bei angemessenem Einsatz das

Verletzungsrisiko.

c) Vermeiden Sie unbeabsichtigtes Einschalten.

Achten Sie darauf, dass sich der Schalter in der

Aus- (Off-) Position befindet, ehe Sie das Gerät

mit der Stromversorgung und/oder

Batteriestromversorgung verbinden, es

aufheben oder herumtragen.

Das Herumtragen von Elektrowerkzeugen mit dem

Finger am Schalter oder das Herstellen der

Stromversorgung bei betätigtem Schalter zieht

Unfälle regelrecht an.

d) Entfernen Sie sämtliche Einstellwerkzeuge

(Einstellschlüssel), ehe Sie das

Elektrowerkzeug einschalten.

Ein an einem beweglichen Teil des

Elektrowerkzeugs angebrachter Schlüssel kann zu

Verletzungen führen.

e) Überstrecken Sie sich nicht. Achten Sie

jederzeit darauf, sicher zu stehen und das

Gleichgewicht zu bewahren.

Dadurch haben Sie das Elektrowerkzeug in

unerwarteten Situationen besser im Griff.

f) Tragen Sie geeignete Kleidung. Tragen Sie

keine lose Kleidung oder Schmuck. Halten Sie

Ihr Haar und Ihre Kleidung von beweglichen

Teilen fern.

Lose Kleidung, Schmuck oder langes Haar kann

von beweglichen Teilen erfasst werden.

g) Wenn Anschlüsse für Staubabsaug- und -

sammelvorrichtungen vorhanden sind, sorgen

Sie dafür, dass diese richtig angeschlossen

und eingesetzt werden.

Durch Entfernen des Staubes können

staubbezogene Gefahren vermindert werden.

h) Lassen Sie es nicht zu, dass die durch häufigen

Gebrauch von Werkzeugen erworbene

Vertrautheit Sie nachlässig macht und Sie die

Sicherheitsrichtlinien für das Werkzeug

ignorieren.

Eine unvorsichtige Handlung kann in

Sekundenbruchteilen zu schweren Verletzungen

führen.

4) Einsatz und Pflege von Elektrowerkzeugen

a) Überbeanspruchen Sie Elektrowerkzeuge nicht.

Benutzen Sie das richtige Elektrowerkzeug für

Ihren Einsatzzweck.

2023/07/19 18:15:57Stylesheet: EU Version: 2023.6.21

C3607DB_C99749581_306_WE_NE_Gre

Deutsch

Das richtige Elektrowerkzeug erledigt seine Arbeit

bei bestimmungsgemäßem Einsatz besser und

sicherer.

b) Benutzen Sie das Elektrowerkzeug nicht, wenn

es sich nicht am Schalter ein- und ausschalten

lässt.

Jedes Elektrowerkzeug, das nicht mit dem Schalter

betätigt werden kann, stellt eine Gefahr dar und

muss repariert werden.

c) Ziehen Sie den Stecker der Stromversorgung

ab und/oder entfernen Sie den Akkupack vom

Elektrowerkzeug, falls abnehmbar, ehe Sie

Einstellarbeiten vornehmen, Zubehörteile

tauschen oder das Elektrowerkzeug verstauen.

Solche präventiven Sicherheitsmaßnahmen

verhindern den unbeabsichtigten Anlauf des

Elektrowerkzeugs und die damit verbundenen

Gefahren.

d) Lagern Sie nicht benutzte Elektrowerkzeuge

außerhalb der Reichweite von Kindern, lassen

Sie nicht zu, dass Personen das

Elektrowerkzeug bedienen, die nicht mit dem

Werkzeug selbst und/oder diesen Anweisungen

vertraut sind.

Elektrowerkzeuge in ungeschulten Händen sind

gefährlich.

e) Wartung von Elektrowerkzeugen und Zubehör.

Prüfen Sie sie auf Fehlausrichtungen,

Leichtgängigkeit beweglicher Teile,

Beschädigungen von Teilen und auf alle

anderen Umstände, die sich auf den Betrieb

des Elektrowerkzeugs auswirken können.

Lassen Sie das Elektrowerkzeug bei

Beschädigungen reparieren, ehe Sie es

benutzen.

Viele Unfälle mit Elektrowerkzeugen sind auf

schlechte Wartung zurückzuführen.

f) Halten Sie Schneidwerkzeuge scharf und

sauber.

Richtig gewartete Schneidwerkzeuge mit scharfen

Schneiden bleiben weniger häufig hängen und sind

einfacher zu beherrschen.

g) Benutzen Sie Elektrowerkzeuge, Zubehör,

Werkzeugspitzen und Ähnliches in

Übereinstimmung mit diesen Anweisungen –

beachten Sie dabei die jeweiligen

Arbeitsbedingungen und die Art der

auszuführenden Arbeiten.

Der Gebrauch des Elektrowerkzeugs für andere als

die vorgesehenen Anwendungen kann zu

gefährlichen Situationen führen.

h) Halten Sie Handgriffe und Greifflächen trocken,

sauber und frei von Öl und Fett.

Rutschige Handgriffe und Greifflächen lassen keine

sichere Handhabung und Kontrolle des Werkzeugs

in unerwarteten Situationen zu.

5) Verwendung und Pflege der Batterie

a) Laden Sie das Gerät nur mit dem vom

Hersteller empfohlenen Ladegerät auf.

Ein Ladegerät für einen speziellen Batterietyp kann

bei Verwendung mit anderen Batterien zu

Brandgefahr führen.

b) Verwenden Sie nur die für das Elektrowerkzeug

speziell empfohlenen Akkus.

Eine Verwendung von anderen Batterien kann zu

Verletzungen und Bränden führen.

c) Ist der Akku nicht in Gebrauch, achten Sie

darauf, dass er nicht mit Metallgegenständen,

beispielsweise Büroklammern, Münzen,

Schlüsseln, Nägeln, Schrauben oder anderen

kleinen Metallgegenständen in Kontakt kommt,

da diese Gegenstände einen Kurzschluss der

Anschlüsse verursachen können.

Ein Kurzschluss der Batterieanschlüsse kann zu

Verbrennungen oder Bränden führen.

d) Im Falle von missbräuchlichen Bedingungen

kann Flüssigkeit aus dem Akku austreten.

Vermeiden Sie in diesem Fall jeglichen Kontakt.

Sollten Sie dennoch mit der Batterieflüssigkeit

in Berührung kommen, waschen Sie die

betroffene Stelle gründlich mit Wasser ab. Ist

die Flüssigkeit ins Auge geraten, suchen Sie

einen Arzt auf.

Ausgetretene Batterieflüssigkeiten können zu

Reizungen oder Verbrennungen führen.

e) Verwenden Sie keinen Akku oder kein

Werkzeug, der oder das beschädigt oder

verändert ist.

Beschädigte oder veränderte Akkus können ein

unvorhersehbares Verhalten aufweisen, das zu

einem Feuer, einer Explosion oder Verletzung

führen kann.

f) Setzen Sie den Akku oder das Werkzeug

keinem Feuer oder keiner zu hohen Temperatur

aus.

Die Einwirkung von Feuer oder einer Temperatur

über 130°C kann zu einer Explosion führen.

g) Befolgen Sie alle Anweisungen zum Aufladen

und laden Sie den Akku oder das Werkzeug

nicht außerhalb des Temperarturbereichs auf,

der in der Anleitung angegeben ist.

Wenn Sie den Akku falsch oder bei Temperaturen

außerhalb des angegebenen Bereichs aufladen,

kann der Akku beschädigt werden und die Gefahr

eines Brandes steigen.

6) Service

a) Lassen Sie Ihr Elektrowerkzeug durch

qualifizierte Fachkräfte und nur unter Einsatz

der passenden Originalersatzteile warten.

Dies sorgt dafür, dass die Sicherheit des

Elektrowerkzeugs nicht beeinträchtigt wird.

b) Warten Sie niemals beschädigte Akkus.

Die Wartung von Akkus ist stets vom Hersteller oder

autorisierten Dienstleistern durchzuführen.

VORSICHT

Von Kindern und gebrechlichen Personen fernhalten.

Werkzeuge sollten bei Nichtgebrauch außerhalb der

Reichweite von Kindern und gebrechlichen Personen

aufbewahrt werden.

SICHERHEITSWARNUNGEN FÜR

AKKU-KREISSÄGE

Schneidvorgänge

a) GEFAHR Sie Ihre Hände vom Arbeitsbereich

und dem Blatt fern. Ihre zweite Hand befindet sich

am Nebengriff oder am Motorgehäuse.

Wenn Sie die Säge mit beiden Händen halten, können

Sie sich nicht in die Finger schneiden.

b) Greifen Sie nicht unter das Werkstück.

Die Schutzabdeckung kann Sie nicht vor dem Teil des

Sägeblattes schützen, der sich unter dem Werkstück

befindet.

c) Passen Sie die Schnitttiefe der Stärke des

Werkstücks an.

2023/07/19 18:15:57Stylesheet: EU Version: 2023.6.21

C3607DB_C99749581_306_WE_NE_Gre

Sidan laddas ...

Hikoki C3607DB Användarmanual

varumärke: Hikoki

Modell: C3607DB

Typ: Användarmanual

Ladda ner pdf

Rapportera

på andra språk

italiano: Hikoki C3607DB Manuale utente
español: Hikoki C3607DB Manual de usuario
Deutsch: Hikoki C3607DB Benutzerhandbuch
português: Hikoki C3607DB Manual do usuário
français: Hikoki C3607DB Manuel utilisateur
dansk: Hikoki C3607DB Brugermanual
Nederlands: Hikoki C3607DB Handleiding

Hikoki C3607DB Användarmanual

Hikoki C3607DB Användarmanual

på andra språk

Relaterade papper

Andra dokument