Yamaha NS-BP80 Bruksanvisning

Printed in China

WS48510

OWNER’S MANUAL

MODE D’EMPLOI

BEDIENUNGSANLEITUNG

MANUALE DI ISTRUZIONI

MANUAL DE INSTRUCCIONES

ИНСТРУКЦИЯ ПО ЭКСПЛУАТАЦИИ

G

MICRO COMPONENT SYSTEM

MICRO-CHAINE

MCR-040/140

i

CAUTION

Use of controls or adjustments or performance of procedures

other than those specified herein may result in hazardous

radiation exposure.

AVERTISSEMENT

L’utilisation de commandes et l’emploi de réglages ou de

méthodes autres que ceux décrits ci-dessous, peuvent

entraîner une exposition à un rayonnement dangereux.

VORSICHT

Die Verwendung von Bedienelementen oder die Einstellung

bzw. die Ausführung von anderen als in dieser Anleitung

beschriebenen Vorgängen kann zu Gefährdung durch

gefährliche Strahlung führen.

ATTENZIONE

L’uso di controlli, regolazioni, operazioni o procedure non

specificati in questo manuale possono risultare in esposizione

a radiazioni pericolose.

PRECAUCIÓN

El uso de los controles, los ajustes o los procedimientos que

no se especifican enste manual pueden causar una exposición

peligrosa a la radiación.

ПРЕДОСТЕРЕЖЕНИЕ

Использование органов управления или произведение

настроек или выполнение процедур, не указанных в

данной инструкции, может отразиться на выделении

опасной радиации.

ii

VAROITUS

Muiden kuin tässä esitettyjen toimintojen säädön tai asetusten

muutto saattaa altistaa vaaralliselle säteilylle tai muille

vaarallisille toiminnoille.

DK

Advarsel: Usynlig laserstråling ved åbning når

sikkerhedsafbrydere er ude af funktion. Undgå utsættelse for

stråling.

Bemærk: Netafbryderen er sekundært indkoblet og ofbryder

ikke strømmen fra nettet. Den indbyggede netdel er derfor

tilsluttet til lysnettet så længe netstikket sidder i stikkontakten.

N

Observer: Nettbryteren er sekundert innkoplet. Den

innebygdenetdelen er derfor ikke frakoplet nettet så lenge

apparatet er tilsluttet nettkontakten.

S

Klass 1 laseraparat

Varning! Om apparaten används på annat sättþän i denna

bruksanvisning specificerats, kan användaren utsättas för osynlig

laserstrålning, som överskrider gränsen för laserklass 1.

Observera! Strömbrytaren är sekundärt kopplad och inte bryter

inte strömmen från nätet. Den inbyggda nätdelen är därför

ansluten till elnätet så länge stickproppen sitter i vägguttaget.

SF

Luokan 1 laserlaite

Varoitus! Laitteen käyttäminen muulla kuin tässä käyttöohjeessa

mainitulla tavalla saattaa altistaa käyttäjän turvallisuusluokan 1

ylittävälle näkymättömälle lasersäteilylle.

Oikeus muutoksiin varataan. Laite ei saa olla alttiina tippu-ja

roiskevedelle.

Huom. Toiminnanvalitsin on kytketty toisiopuolelle, eikä se

kytke laitetta irti sähköverkosta. Sisäänrakennettu verkko-osa on

kytkettynä sähköverkkoon aina silloin, kun pistoke on

pistorasiassa.

■ For U.K. customers

If the socket outlets in the home are not suitable for the plug

supplied with this appliance, it should be cut off and an

appropriate 3 pin plug fitted. For details, refer to the instructions

described below.

The plug severed from the mains lead must be destroyed, as a

plug with bared flexible cord is hazardous if engaged in a live

socket outlet.

■ Special Instructions for U.K. Model

VARO!

AVATTAESSA JA SUOJALUKITUS OHITETTAESSA

OLET ALTTIINA NÄKYMÄTTÖMÄLLE

LASERSÄTEILYLLE.

ÄLÄ KATSO SÄ TEESEEN.

VARNING!

OSYNLIG LASERSTRÅLNING NÄR DENNA DEL ÄR

ÖPPNAD OCH SPÄRREN ÄR URKOPPLAD. BETRAKTA

EJ STRÅLEN.

OBSERVERA

Apparaten kopplas inte bort från växelströmskällan (nätet) så

länge som den är ansluten till vägguttaget, även om själva

apparaten har stängts av.

ADVARSEL

Netspæendingen til dette apparat er IKKE afbrudt, sålæenge

netledningen siddr i en stikkontakt, som er t endt - også selvom

der or slukket på apparatets afbryder.

VAROITUS

Laitteen toisiopiiriin kytketty käyttökytkin ei irroita koko

laitetta verkosta.

Note

IMPORTANT

THE WIRES IN MAINS LEAD ARE COLOURED IN

ACCORDANCE WITH THE FOLLOWING CODE:

Blue: NEUTRAL

Brown: LIVE

As the colours of the wires in the mains lead of this

apparatus may not correspond with the coloured markings

identifying the terminals in your plug, proceed as follows:

The wire which is coloured BLUE must be connected to the

terminal which is marked with the letter N or coloured

BLACK. The wire which is coloured BROWN must be

connected to the terminal which is marked with the letter L

or coloured RED.

Make sure that neither core is connected to the earth

terminal of the three pin plug.

iii En

1 To assure the finest performance, please read this manual

carefully. Keep it in a safe place for future reference.

2 Install this sound system in a well ventilated, cool, dry,

clean place - away from direct sunlight, heat sources,

vibration, dust, moisture, and/or cold. For proper

ventilation, allow the following minimum clearances

around CRX-040/140.

Top: 10 cm (4 in)

Rear: 10 cm (4 in)

Sides: 10 cm (4 in)

3 Locate this unit away from other electrical appliances,

motors, or transformers to avoid humming sounds.

4 Do not expose this unit to sudden temperature changes

from cold to hot, and do not locate this unit in an

environment with high humidity (i.e. a room with a

humidifier) to prevent condensation inside this unit,

which may cause an electrical shock, fire, damage to this

unit, and/or personal injury.

5 Avoid installing this unit where foreign object may fall

onto this unit and/or this unit may be exposed to liquid

dripping or splashing. On the top of this unit, do not

place:

– Other components, as they may cause damage and/or

discoloration on the surface of this unit.

– Burning objects (i.e. candles), as they may cause fire,

damage to this unit, and/or personal injury.

– Containers with liquid in them, as they may fall and

liquid may cause electrical shock to the user and/or

damage to this unit.

6 Do not cover this unit with a newspaper, tablecloth,

curtain, etc. in order not to obstruct heat radiation. If the

temperature inside this unit rises, it may cause fire,

damage to this unit, and/or personal injury.

7 Do not plug in this unit to a wall outlet until all

connections are complete.

8 Do not operate this unit upside-down. It may overheat,

possibly causing damage.

9 Do not use force on switches, knobs and/or cords.

10 When disconnecting the power cable from the wall outlet,

grasp the plug; do not pull the cable.

11 Do not clean this unit with chemical solvents; this might

damage the finish. Use a clean, dry cloth.

12 Only voltage specified on this unit must be used. Using

this unit with a higher voltage than specified is dangerous

and may cause fire, damage to this unit, and/or personal

injury. Yamaha will not be held responsible for any

damage resulting from use of this unit with a voltage

other than specified.

13 To prevent damage by lightning, keep the power cable

and outdoor antennas disconnected from a wall outlet or

this unit during a lightning storm.

14 Do not attempt to modify or fix this unit. Contact

qualified Yamaha service personnel when any service is

needed. The cabinet should never be opened for any

reasons.

15 When not planning to use this unit for long periods of

time (i.e. vacation), disconnect the AC power plug from

the wall outlet.

16 Be sure to read the “TROUBLESHOOTING” section on

common operating errors before concluding that this unit

is faulty.

17 Before moving this unit, press to set this unit to the

standby mode, and disconnect the AC power plug from

the wall outlet.

18 Condensation will form when the surrounding

temperature changes suddenly. Disconnect the power

cable from the outlet, then leave this unit alone.

19 When using this unit for a long time, this unit may

become warm. Turn the power off, then leave this unit

alone for cooling.

20 Install this unit near the AC outlet and where the AC

power plug can be reached easily.

21 The batteries shall not be exposed to excessive heat such

as sunshine, fire or the like. When you dispose of

batteries, follow your regional regulations.

22 Excessive sound pressure from earphones and

headphones can cause hearing loss.

LASER SAFETY

This unit employs a laser. Due to possible eye injury, only a

qualified service person should remove the cover or attempt to

service this device.

DANGER

This unit emits visible laser radiation when open. Avoid direct

eye exposure to beam. When this unit is plugged into the wall

outlet, do not place your eyes close to the opening of the disc tray

and other openings to look into inside.

Caution: Read this before operating your unit.

This unit is not disconnected from the AC power source as long as

it is connected to the wall outlet, even if this unit itself is turned off

by . This state is called the standby mode. In this state, this unit is

designed to consume a very small quantity of power.

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO

NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.

The laser component in this product is capable of emitting radiation

exceeding the limit for Class 1.

CAUTION

Danger of explosion if battery is incorrectly replaced.

Replace only with the same or equivalent type.

Do not use MCR-140 within 22 cm (9 in) of persons with a heart

pacemaker implant or defibrillator implant.

We, the manufacturer Yamaha hereby declare that the MCR-140 is

in compliance with the essential requirements and other relevant

provisions of Directive 1999/5/EC.

1 En

PREPARATION OPERATION

ADDITIONAL

INFORMATION

English

PARTS..................................................................... 2

PLAYABLE DISCS AND FILE FORMAT......... 3

CONNECTION....................................................... 4

Basic connection........................................................ 4

Wireless connection ........................... 5

Other connection........................................................ 5

REMOTE CONTROL ........................................... 6

FRONT PANEL DISPLAY ................................... 6

FRONT PANEL AND BASIC OPERATION ..... 7

LISTENING TO MUSIC....................................... 8

Playback operation..................................................... 8

Other operation.......................................................... 9

LISTENING TO FM RADIO STATIONS ........ 10

Tuning to radio stations ........................................... 10

Presetting radio stations........................................... 10

Selecting preset radio stations (Preset tuning)......... 10

Displaying Radio Data System information............ 10

USING USEFUL FUNCTIONS .......................... 11

Using setup menu .................................................... 11

Using timer and sleep timer..................................... 13

TROUBLESHOOTING .......................................14

General..................................................................... 14

Radio reception........................................................ 15

iPod™...................................................................... 15

USB ......................................................................... 18

Disc playback .......................................................... 19

Remote control ........................................................ 19

HANDLING COMPACT DISCS ........................20

SPECIFICATIONS...............................................20

CONTENTS

PREPARATION

OPERATION

MCR-140

ADDITIONAL INFORMATION

■ About this manual

• This manual describes how to operate this unit using a remote control except when it is not available. Some of these

operations are also available using the front panel buttons.

• The symbol “☞” with page number(s) indicates the corresponding reference page(s).

• Notes contain important information about safety and operating instructions. y indicates a tip for your operation.

• This manual is printed prior to production. Design and specifications are subject to change in part as a result of

improvements, etc. In case of differences between the manual and the product, the product has priority.

■ Copyright and logo marks

Advanced YST

In 1988, Yamaha brought to the marketplace speaker systems

utilizing YST (Yamaha Active Servo Technology) to give

powerful, high quality bass reproduction. This technique uses a

direct connection between the amplifier and speaker, allowing

accurate signal transmission and precise speaker control.

As this technology uses speaker units controlled by the negative

impedance drive of the amplifier and resonance generated

between the speaker cabinet volume and port, it creates more

resonant energy (the “air woofer” concept) than the standard bass

reflex method. This allows for bass reproduction from much

smaller cabinets than was previously possible.

AirWired

Real-time uncompressed music transfer without sound

degradation is realized by Yamaha original digital wireless

transfer technology, AirWired. You can also control turning on/

standby and volume with the iPod by AirWired.

MCR-140

2 En

PREPARATION

Make sure you have all of the following items.

■ Using the remote control

■ Replacing the battery in the remote control

PARTS

+

Use the remote control within 6 m (20’) of this unit and point it toward the

remote control sensor.

• Do not spill liquid on the remote control.

• Do not drop the remote control.

• Do not leave the remote control in the following places:

– hot or humid places such as a bathroom or near a heater

– extremely cold places

– dusty places

Change the battery when the operation range of the remote control decreases.

MCR-040

CD receiver

(CRX-040)

Cover the iPod dock when not using.

Dock cover

Speakers

(NS-BP80)

Indoor FM antenna

Speaker cable

(1.5 m (4.9’) × 2)

Remote control

MCR-140

TransmitterCD receiver

(CRX-140)

Within 6 m

(20’)

Notes

CR2025 battery

Straight pin

3 En

PREPARATION

English

■ Playable discs

Use compact discs bearing the marks below.

To play back an 8-cm (3 in) CD

Place it in the inner recessed area of the disc tray. Do not

put a normal (12-cm) CD on top of an 8-cm (3 in) CD.

■ Playable MP3 and WMA files

MP3

*

1

Variable bitrate is supported.

WMA

• Version 8

• Version 9 (Standard and variable bitrates are supported.

Professional and Lossless are not supported.)

*

2

Both constant and variable bitrates are supported.

• Playback for Data Disc starts in alphanumeric order of files.

• Playback for USB starts in order by date and time of creation.

• Copyright-protected WMA (DRM) files cannot be played back

by this unit.

• The disc must be ISO 9660 compatible.

• The maximum file and folder numbers are as follows.

*

3

The root is counted as one of the folders.

PLAYABLE DISCS AND FILE FORMAT

....

Compact discs (digital audio)

....

CD-R,CD-RW digital audio discs

• CD-R or CD-RW discs bearing one of

the following phrases.

FOR CONSUMER

FOR CONSUMER USE

FOR MUSIC USE ONLY

• Finalized CD-R or CD-RW discs

This compact disc player may not be able to

play some CD-R/CD-RW discs or discs on

which recording was not made correctly.

....

CD-TEXT discs

To prevent a malfunction of this unit:

• Do not use any nonstandard shaped

disc (heart, etc.) available on the

market because it might damage the

unit.

• Do not use a disc with tape, stickers, or paste on it. If

you use such a disc, the disc may get stuck in the

unit, or damage to the unit may result.

Note: Do not use any lens cleaners as they may be a

cause of malfunction.

Note

Format

Bitrate

(kbps)

Sampling

frequency

(kHz)

MPEG 1 Audio Layer-3

32-320

*1

32/44.1/48

MPEG 2 Audio Layer-3, 2

8-160

*1

16/22.05/24

Profile

Bitrate

(kbps)

Sampling

frequency

(kHz)

High Profile

32-320

*2

32/44.1/48

Mid Profile

16-32 22.05

Notes

Data Disc USB

Maximum file number

511 9,999

Maximum folder number

*3

255 255

Maximum file number per

folder

511 255

4 En

Follow the procedure below to connect the speakers and indoor FM antenna to this unit.

Do not connect the power cable of this unit until all cable connections are completed.

• Be sure to connect the left channel (L), right channel (R), “+”(red) “–”(black) properly. If the connections are faulty, no sound will be

heard from the speakers, and if the polarity of the speaker connections is incorrect, the sound will be unnatural and lacks bass.

• Do not let the bare speaker wires touch each other or do not let them touch any metal part of this unit. This could damage this unit and/

or the speakers.

• Use the supplied speakers only. Using different speakers may cause the sound to differ from the intended design.

• There is a chance that placing speakers too close to a CRT-based (Braun tube) TV set might impair picture color. Should this happen,

move the speakers away from the TV set.

CONNECTION

Basic connection

CAUTION

Notes

To the wall outlet

Indoor FM antenna

• The antenna should be stretched out.

• If radio reception is poor, change the height,

direction, or placement of the antenna.

• If you use an outdoor antenna instead of the

supplied FM antenna, reception will be better.

Notes

CONNECTION

5 En

PREPARATION

English

Playback operation with your iPod connected to the

transmitter turns the unit on automatically, and you can

enjoy the music in your iPod.

y

To turn on the unit by the playback operation of your iPod, set

POWER SAVING to NORMAL (☞ P. 11).

The volume of the unit is adjusted simultaneously with the iPod.

Be careful when controlling the volume with your iPod.

■ Group setting

To operate your iPod using transmitter, you need to match

the wireless group between the transmitter and the CD

receiver (CRX-140). The default setting for both the

transmitter and the CD receiver is A2.

To select wireless group of the CD receiver

(CRX-140)

■ Wireless connection to Subwoofer

You can use a subwoofer wirelessly with the wireless

subwoofer kit (SWK-W10, etc., sold separately). To

establish the wireless connection, set WIRELESS SW to

YES (☞ P. 11). For details, refer to the owner’s manual

of SWK-W10.

■ Stationing iPod

Station or remove your iPod whenever you want.

y

Your iPod is automatically charged when your iPod is set in the

iPod dock/charging cradle, even if the unit is in standby mode.

The unit is compatible with iPod (5th generation), iPod classic,

iPod nano, and iPod touch.

To secure the connection, attach a compatible Dock Adapter

supplied with the iPod or an iPod Universal Dock Adapter

(sold separately), and remove the protective case covering

your iPod.

Station your iPod in the charging cradle when you want to charge

your iPod. You can also control your iPod with the remote control

when your iPod is in the charging cradle.

■ Connecting USB

Connect or remove your USB device whenever you want.

y

USB device is automatically charged when it is connected to the

unit, even if the unit is in standby mode.

• This unit supports USB mass storage class devices (e.g., flash

memories or portable audio players) using FAT16 or FAT32

format.

• Do not connect devices other than USB mass storage class

devices (such as USB chargers or USB hubs), PCs, card

readers, an external HDD, etc.

Wireless connection

Note

MCR-140

GROUP A1

GROUP A2

GROUP B3

Press SETUP.

Select WIRELESS SET

menu.

Confirm with ENTER.

Select the group.

Complete the setting.

1 2

3 4

5 6

Exit setup menu.

Other connection

Note

Notes

Dock Adapter

MCR-040

iPod dock

MCR-140

Transmitter

Charging

cradle

6 En

1 SLEEP indicator: Lights up when the sleep timer is on

(☞ P. 13).

2 PRESET indicator: Lights up when you preset radio

stations (☞ P. 10).

3 STEREO indicator: Lights up when this unit is receiving a

strong signal from an FM stereo broadcast.

4 AUTO indicator: Lights up when this unit is in the

Automatic Tuning mode (☞ P. 10).

5 SHUFFLE indicator: Lights up when you set your

iPod (MCR-040)/CD/USB to shuffle play (☞ P. 9).

6 REPEAT indicator: Lights up when you set your

iPod (MCR-040)/CD/USB to repeat play (☞ P. 9).

7 Radio Data System indicators: The name of the Radio

Data System data offered by the currently received Radio

Data System station lights up (☞ P. 10).

8 MUTE indicator: Lights up when the sound is muted.

9 Multi information display: Shows the various information

such as the tuning frequency.

0 TIMER indicator: Flashes during timer setting. Lights up

when the timer is on (☞ P. 13).

A TUNED indicator: Lights up when this unit is tuned into a

station (☞ P. 10).

B MEMORY indicator: Flashes when searching for a radio

station by automatic preset tuning. Lights up when you preset

radio stations automatically or manually (☞ P. 10).

C Multi information indicator: Indicates the music information

currently displayed on Multi information display (☞ P. 9).

D Operation indicators: Shows operable multi function

buttons for a currently selected SETUP item.

REMOTE CONTROL

1 Infrared signal transmitter (☞ P. 2)

2 : standby/on

3 Source buttons: PORTABLE, CD, iPod, USB, TUNER (☞ P. 8, 10)

4 FM control buttons (☞ P. 10)

5 /: iPod scroll buttons (☞ P. 8)

MENU/ENTER/ / / : multi function buttons (☞ P. 8, 9, 10, 11)

: Stop button (☞ P. 8, 9)

6 FOLDER T/S (☞ P. 8)

7 SETUP (☞ P. 5, 11)

8 SHUFFLE/REPEAT (☞ P. 9)

9 DISPLAY (☞ P. 9, 12)

0 TIMER (☞ P. 12, 13)

A SLEEP (☞ P. 13)

B Battery insulation sheet: Remove before using.

C Volume control buttons: Press to control the volume.

Press MUTE to turn off the sound. Press again to resume the volume.

FRONT PANEL DISPLAY

7 En

OPERATION

English

OPERATION

y

• This unit has an automatic standby function, which will automatically switch the unit to standby mode if the unit is left turned on for

1 hour without playback or any other operation being performed. This function is not available when the source is set to PORTABLE/

FM.

• Press to set the unit to standby mode. All the information on the front panel display is not displayed in standby mode. This can

reduce power consumption. To turn on the unit, press / , or start playback with your iPod connected to the transmitter (MCR-140

only).

• If the iPod selected as the input source is disconnected from the transmitter, or does not output sound for a certain period, the unit will

automatically switch to standby mode (MCR-140 only).

FRONT PANEL AND BASIC OPERATION

PORTABLE

VOLUME

INPUT

iPod

USB

iPod dock

:

Unit standby/on

:

Disc tray open/close

:

Play/pause playback

:

Stop playback

INPUT button:

Press repeatedly to choose the input source.

VOLUME

USB port:

☞ P. 5, 8

3.5 mm stereo mini

plug cable

PORTABLE:

:

Connecting headphones

Press the INPUT button repeatedly

to select PORTABLE. Then start

playback on the connected portable

audio device.

No sound is output from the speakers

when headphones are connected.

Down Up

MCR-140

Disc tray

MCR-040

Charging cradle

8 En

Follow the procedures below to play back music.

*

1

Some features may not be available depending on the model or the software version of your iPod.

*

2

· Some devices may not work properly even if they meet the requirements.

· Playability of and power supply to all kind of USB devices are not guaranteed.

· The reading time may exceed 30 seconds depending on the number of files/folders.

· Yamaha and suppliers accept no liability for the loss of data saved on the USB devices connected to this unit.

As a precaution, it is recommended that the files are made backup copies.

*

3

If you press these buttons during playback, the folder name is displayed on the front panel display for a certain period.

LISTENING TO MUSIC

Playback operation

Set the source

Switch the

input

Select music and start playback

iPod

*1

CD

USB

*2

1

2

3

☞ P. 5

MCR-040

Dock Adapter

Scroll the list

Control menu

MCR-140

Control with iPod

For the MCR-140, the operation on the remote

control or front panel is available only when your

iPod is stationed in the charging cradle (☞ P. 5).

Be careful when controlling the volume (☞ P. 5).

☞ P. 5, 16

MCR-140

Status indicator

Skip to the first file in the

previous/next folder for MP3 or

WMA

*3

☞ P. 5

LISTENING TO MUSIC

9 En

OPERATION

English

■ Control playback

: Skip forward/Press and hold to Fast forward

: Skip backward/Press and hold to Rewind

: Play/Pause

: Stop

• Playback for Data Disc starts in alphanumeric order of files.

• Playback for USB starts in order by date and time of creation.

■ Shuffle play

You can play back in random sequence.

For iPod

*

1

You cannot set ALBUMS when you use an iPod touch.

For CD/USB

*

2

If the audio format of the selected music source is MP3/

WMA, you can also select FOLDER.

■ Repeat play

You can play back repeatedly.

*

3

If the audio format of the selected music source is MP3/

WMA, you can also select FOLDER.

■ Switching the display

You can switch the playback information shown on the

front panel display. Some special characters may not be

shown properly.

For iPod

Song number and elapsed time (default setting)

↓

Song number and remaining time

↓

Song name

↓

Artist name

↓

Album name

↓

Back to the default setting

This function is available for iPod (5th generation), iPod classic,

iPod nano, and iPod touch. However, even with these models,

this function may not be available depending on the software

version of your iPod.

For CD/USB

Track/file number and elapsed time of the current

song (default setting)

↓

Track number and remaining time of the current

song

*4

↓

Total time of the disc

*4

↓

Remaining time of the disc

*4

↓

File name

*5

↓

Track name

*6

↓

Artist name

*6

↓

Album name

*6

↓

Back to the default setting

*

4

Only for Audio CDs

*

5

Only for MP3/WMA files

*

6

Only when the selected track has information

Other operation

Notes

1 2

During playback

Press repeatedly.

Note

Press repeatedly.

1 2

During playback

MCR-040

10 En

y

If the signal received from the station you want to select is weak,

you can also tune into radio stations manually by pressing

TUNING<</>> repeatedly.

If you tune to a station manually, the sound is monaural.

You can store your favorite FM stations with the preset

function.

■ Automatic preset tuning

When you perform the automatic preset, all stored stations are

cleared and the new stations are stored.

■ Manual preset tuning

y

• You can preset up to 30 FM stations.

• To cancel the manual preset while choosing a preset number,

press MEMORY again.

• You can delete a preset station by pressing SETUP → MENU

S/T → ENTER to select PRESET DELETE.

PS (Program Service)

↓

PTY (Program Type)

↓

RT (Radio Text)

↓

CT (Clock Time)

↓

Frequency

↓

Back to the PS

If the signal transmission of the Radio Data System station is too

weak, this unit may not be able to receive Radio Data System

information completely. In particular, RT (Radio Text)

information uses a lot of bandwidth, so it may be less available

compared to other types of information.

LISTENING TO FM RADIO STATIONS

Tuning to radio stations

Note

Presetting radio stations

Note

Press TUNER. Press and hold.

Automatic tuning starts.

1 2

Press and hold

MEMORY for more than

2 seconds in FM mode.

Start the automatic preset.

1 2

Tune into a favorite

radio station.

Press MEMORY.

Select the preset

number you want to

store to.

Complete the

manual preset.

1 2

3 4

Selecting preset radio stations

(Preset tuning)

Displaying Radio Data System

information

Note

Select the preset radio station

in FM mode.

1 2

Press repeatedly.

While listening

11 En

OPERATION

English

The setup menu appears on the front panel display by pressing SETUP. You can set various useful functions with setup

menu.

*

1

This function is available only for Europe, U.K. and Australia models.

*

2

When there are some parameters to set, repeat steps 3 and 4. You can go back to a previous parameter by pressing .

*

3

To set additional items, repeat steps 2 to 5.

y

To cancel the setting during the operation, press SETUP.

■ Setting dimmer, tone/balance and power saving mode

DIMMER: Changes the brightness of the front panel display.

TREBLE

*4

: Adjusts the high frequency response.

BASS

*4

: Adjusts the low frequency response.

BALANCE: Adjusts the volume level of each left and right speaker channel.

POWER SAVING: If you set to ECO, you can reduce standby power consumption. However, you cannot turn on the

unit by playback operation on your iPod during standby mode. The default setting is NORMAL. This function is

available only for MCR-140.

WIRELESS SW: Set to YES when you use a subwoofer via the wireless subwoofer kit (SWK-W10, etc., sold

separately). The default setting is NO. This function is available only for MCR-140.

*

4

Also effective when you are using headphones.

USING USEFUL FUNCTIONS

Using setup menu

Setup menu Parameter or control range Reference page

PRESET DELETE (Displays only when the input source is set to FM.) 10

DIMMER DIMMER ON (25%)/OFF (100%) below

TREBLE –6 dB to +6 dB below

BASS –6 dB to +6 dB below

BALANCE L+5 - CENTER - R+5 below

AUTO CLOCK*

1

ON/OFF 12

CLOCK SET Hour, minute 12

TIMER SET

Time (hour, minute), running time, sound (source, track or preset

number), timer on/off

12

WIRELESS SET GROUP A1/A2/A3/B1/B2/B3 5

POWER SAVING NORMAL/ECO below

WIRELESS SW NO/YES below

MCR-140

Press SETUP. Select desired

setup menu.

Confirm with

ENTER.

Change the settings. Complete the

setting.*

3

1 2 3 4 5

Repeat*

2

Exit setup

menu.

6

USING USEFUL FUNCTIONS

12 En

■ Adjusting the clock

AUTO CLOCK: Automatic adjustment function is available for Europe, U.K. and Australia models only. To apply for

this function, set AUTO CLOCK to ON.

CLOCK SET: To set hour and minute, repeat steps 3 and 4 on page 11.

y

The current time appears on the front panel display for a certain period by pressing and holding DISPLAY if the time setting has

completed.

The time setting is lost once the power cable is disconnected from the wall outlet.

■ Setting the timer

TIMER SET: To select the following setting items, repeat steps 3 and 4 on page 11.

y

You can enter TIMER SET directly by pressing and holding TIMER.

Note

Time (hour and minute)

Running time

You can choose the running time from 10 minutes to 90 minutes in 10 minute increments.

“– –” means the unit will not be set to standby mode automatically.

Input source and track/file number or preset number

• If the source is not set properly, the timer sound will not be heard. Make sure that the source is set securely.

• MCR-140: When you select an iPod as the input source, you need to set the iPod in the charging cradle on the unit.

iPod:

When you select the iPod as a source, this unit resumes the music that you were listening to last time.

CD:

Set a track/file number.

If you set the track/file number which is not exist, the first track/file is played back automatically.

USB:

Set a file number.

If you set a file number that does not exist, the first file is played back automatically.

FM:

Set preset number.

By selecting “– –”, the FM station you set last time is set.

Timer ON/OFF

Switch the timer on/off. When the timer is on, the TIMER indicator lights up on the front panel display

(☞ P. 6).

y

This setting is also available with TIMER (☞ P. 6, 13).

Notes

USING USEFUL FUNCTIONS

13 En

OPERATION

English

■ Using the timer

The timer sets the unit to play back music at the time you set. The unit is set to standby mode after the specified running

time elapses.

To use the timer, set the appropriate input source securely and set the timer in the setup menu in advance (☞ P. 12).

Each time you press TIMER while the power is on, it switches on/off. When you switch on the timer, the TIMER

indicator lights up on the front panel display (☞ P. 6). To turn on the unit via the timer, set this unit to standby mode

when the timer is switched on.

• The clock has to be set in advance.

• When the unit is in standby mode, the TIMER indicator does not light up on the front panel display even if the timer is on.

• After the unit is operated via the timer, the timer function switches off.

y

• To activate the timer function again, press TIMER while the power is on.

• The timer setting is saved for convenient use next time.

■ Using sleep timer

The sleep timer sets the unit to the standby mode after the specified time elapses.

The SLEEP indicator lights up on the front panel display (☞ P. 6).

Using timer and sleep timer

Notes

Press TIMER.

1 2

Adjust the volume level.

Press repeatedly.

14 En

ADDITIONAL INFORMATION

Refer to the table below when this unit does not function properly. If the problem you are experiencing is not listed below

or if the instruction below does not help, turn off this unit, disconnect the power cable, and contact the nearest authorized

Yamaha dealer or service center.

TROUBLESHOOTING

General

Problem Cause Remedy page

This unit fails to turn

on or enters the

standby mode soon

after the power is

turned on.

The unit does not

operate properly.

The power cable is not connected or the

plug is not completely inserted.

Connect the power cable firmly.

4

This unit has been exposed to a strong

external electric shock (such as lightning

or strong static electricity).

Set this unit to the standby mode, disconnect the

power cable, plug it back in after 30 seconds and

then use it normally.

—

No sound. No appropriate input source has been

selected.

Select an appropriate input source with INPUT on

the front panel (or the source buttons on the remote

control).

—

Speaker connections are not secure. Secure the connections.

4

The mute function may be on. Cancel the mute function.

6

The volume is turned down. Turn up the volume.

—

Signals this unit cannot reproduce are

being input from a source component,

such as a CD-ROM.

Play a source whose signals can be reproduced by

this unit.

3

The power is

suddenly turned off.

The sleep timer may be set. This is not malfunction. Turn on the unit and play the

source again.

—

The unit is left turned on for 1 hour

without playback or any other operation

being performed.

The power was turned on by the timer

and elapsed specified running time.

MCR-140: The iPod selected as the input

source is disconnected from the

transmitter, or does not output sound for a

certain period.

The clock setting has

been cleared.

The power cable has been disconnected. Connect the power cable, and set the clock again.

—

Sound is heard from

the speaker on one

side only.

Incorrect cable connections. Connect the cables properly. If the problem persists,

the cables may be defective.

4

There is noise

interference from

digital or radio

frequency

equipment.

This unit is too close to the digital or

high-frequency equipment.

Move this unit farther away from such equipment.

—

TROUBLESHOOTING

15 En

ADDITIONAL

INFORMATION

English

The following status messages appear only if you are using MCR-140.

In case of a transmission error without a status message appearing in the front panel of this unit, check the connection to your iPod (see

page 5).

The following status messages appear only if you are using MCR-040.

Status message Cause Remedy page

SubWoofer Link

Wireless connection between the

subwoofer and the unit is established.

SubWooferUnlink

Wireless connection between the

subwoofer and the unit is disconnected.

Wireless Error

There is a problem with the internal

circuit of this unit.

Disconnect the power cable and contact the nearest

authorized Yamaha dealer or service center.

—

Radio reception

Problem Cause Remedy page

FM stereo reception is

noisy.

The antenna is connected improperly. Check the antenna connections.

4

The characteristics of FM stereo

broadcasts may cause this problem

when the transmitter is too far away or

the antenna input is poor.

Try using a high-quality directional FM antenna.

—

Use the manual tuning method.

10

The desired station

cannot be tuned into

with the automatic

tuning method.

The signal is too weak. Use a high-quality directional FM antenna.

—

Use the manual tuning method.

10

The preset selecting

function does not

work.

The preset (memory) may have been

erased.

Preset radio stations again.

10

There is distortion,

and clear reception

cannot be obtained

even with a good FM

antenna or an outdoor

antenna.

Multipath reflection or other radio

interference may have occurred.

Change the height, direction, or placement of the

antenna.

—

iPod™

Note

Status message Cause Remedy page

iPod Connecting

iPod Charging

This unit is in the middle of recognizing

the connection with your iPod.

If the message continues to appear in the front panel

display and playback does not start, connect the iPod

again.

—

Unknown iPod

There is a problem with the signal path

from your iPod to this unit.

Connect the iPod again.

5

The iPod being used is not supported by

this unit.

Only iPod (5th generation), iPod classic, iPod nano,

and iPod touch are supported.

—

iPod

This unit has recognized your iPod;

however, it cannot obtain information

such as elapsed time.

iPod Unplugged

Your iPod was removed from the iPod

dock.

Station your iPod back in the iPod dock.

5

TROUBLESHOOTING

16 En

The following status messages appear only if you are using MCR-140.

The following LED statuses of the status indicator refer to the transmitter.

Status message Cause Remedy page

iPod Linked

iPod

Wireless connection was successful.

iPod Unlinked

Wireless connection has disconnected. Connect the iPod to the transmitter and start

playback.

5

iPod Low Batt.

The battery of the iPod is getting flat. Set it in the charging cradle.

5

LED status Transmitter status Remedy page

Off The transmitter is in standby mode.

An iPod is not connected or wireless

communication has not been established.

Flashes green Connection in progress. Please wait.

—

Flashes green once Adjusting the volume level or operating

with the remote control.

Lights up green Wireless communication between the

unit and transmitter is established.

Lights up green and

flashes red for 2

seconds

An unsupported iPod is connected. Only iPod (5th generation), iPod classic, iPod nano,

and iPod touch are supported.

5

Lights up green and

keeps flashing red

Connection failed. Connect again.

8

Flashes red Error occurs. Remove the iPod from the transmitter, and connect

again.

8

Flashes red once The volume of the unit is set to maximum

or minimum.

Flashes red 2 times

continuously

(regardless of green

status)

The battery of the iPod is low. Set the iPod in the charging cradle.

5

Sidan laddas ...

Yamaha NS-BP80 Bruksanvisning

Yamaha NS-BP80 Bruksanvisning

på andra språk

Relaterade papper

Andra dokument