Sony CDX-C4840R Användarmanual

Operating Instructions

Manual de instrucciones

Manual de instruções

Bruksanvisning

 1999 by Sony Corporation

GB

ES

SE

PT

FM/MW/LW

Compact Disc

Player

CDX-C4850R

CDX-C4840R

CDX-4260R

For installation and connections, see the supplied installation/connections

manual.

Para obtener información sobre la instalación y las conexiones, consulte el manual

de instalación/conexiones suministrado.

Para a instalação e as ligações, consulte o manual de instalação/ligações

fornecido.

Vi hänvisar till det medföljande häftet angående montering/anslutningar.

3-865-874-12 (1)

CDX-4250R

CDX-4240R

CDX-4250RV

2

Welcome !

Thank you for purchasing the Sony Compact

Disc Player. This unit lets you enjoy a variety

of features as well as an optional rotary

commander.

CDX-C4850R/C4840R only

In addition to the CD playback and radio

operations, you can expand your system by

connecting an optional CD/MD unit*

1

.

When you operate this unit or a connected

optional CD unit with the CD TEXT function,

the CD TEXT information will appear in the

display when you play a CD TEXT disc*

2

.

*

1

You can also connect a CD changer, an MD

changer, a CD player, or an MD player.

*

2

A CD TEXT disc is an audio CD that includes

information such as the disc name, artist name,

and track names.

This information is recorded on the disc.

3

Table of Contents

This Unit Only With Optional Equipment

Location of controls ................................................. 4

Getting Started

Resetting the unit ................................................ 5

Detaching the front panel .................................. 5

Setting the clock .................................................. 6

CD Player

Listening to a CD ................................................ 7

Playing a CD in various modes ........................ 9

Radio

Memorising stations automatically

— Best Tuning Memory (BTM) ................... 9

Memorising only the desired stations ............ 10

Receiving the memorised stations .................. 10

RDS

Overview of the RDS function ........................ 11

Displaying the station name ............................ 11

Retuning the same programme automatically

— Alternative Frequencies (AF) ................ 12

Listening to traffic announcements ................ 13

Presetting the RDS stations with the AF and

TA data .......................................................... 14

Locating a station by programme type .......... 15

Setting the clock automatically ....................... 16

Other Functions

Labelling the rotary commander .................... 16

Using the rotary commander .......................... 17

Adjusting the sound characteristics ............... 18

Attenuating the sound ..................................... 18

Changing the sound and display settings ..... 19

Boosting the bass sound

— D-bass ....................................................... 20

CD/MD Unit

(CDX-C4850R/C4840R only)

Playing a CD or MD ......................................... 20

Playing tracks repeatedly

— Repeat Play .............................................. 22

Playing tracks in random order

— Shuffle Play .............................................. 22

Labelling a CD

— Disc Memo ............................................... 23

Locating a disc by name

— List-up ...................................................... 24

Selecting specific tracks for playback

— Bank .......................................................... 24

Additional Information

Precautions ......................................................... 25

Maintenance....................................................... 26

Dismounting the unit ....................................... 27

Specifications ..................................................... 28

Troubleshooting guide ..................................... 29

4

Location of controls

Refer to the pages for details.

1 SEEK/AMS (seek/Automatic Music

Sensor/manual search) control 8, 10, 12,

15, 22, 24

2 MODE (band/unit select) button 9, 10,

20, 23

3 SOURCE (source select) button 7, 9, 10,

14, 20, 23

4 Dial (volume/bass/treble/left-right/

front-rear) 6, 18, 23

5 SOUND button 18

6 DSPL (display mode change) button

7, 8, 11, 20, 21, 23, 24

7 Display window

8 CDX-C4850R/C4840R:

PTY/LIST button

CDX-4260R/4250R/4240R/4250RV:

PTY button

Disc Memo 23

List-up 24

RDS Programme 15

9 6 (eject) button 7

0 AF/TA button 12, 13, 14

!¡ RELEASE (front panel release) button

5, 26

!™ Reset button (located on the front side

of the unit behind the front panel) 5

!£ OFF button 5, 7

!¢ SHIFT button

PLAY MODE 9, 10, 11, 12, 14, 24, 25

REP 9, 22

SET UP 6, 8, 16, 19, 21

SHUF 9, 22

!∞ During radio reception:

Number buttons 10, 13, 14

During CD/MD playback:

Direct disc selection buttons 22

!§ D-BASS control 20

The illustration of the front panel in this manual is

of the CDX-C4850R/C4840R.

RELEASE

SEEK/AMS

SOUND

PTY

AF/TA

D - BASS

MODE

SOURCE

2 3 4 5 6 7 8 9110

OFF

SHIFT

DSPL

D

CDX-C4850R/C4840R/4260R/

LIST

4250R/4240R/4250RV

OFF

1

2

3

5

Reset button

Attaching the front panel

Attach part a of the front panel to part b of

the unit as illustrated and push until it clicks.

Notes

• Be sure not to attach the front panel upside

down.

• Do not press the front panel too hard against the

unit when attaching it.

• Do not press too hard or put excessive pressure

on the display window of the front panel.

• Do not expose the front panel to direct sunlight

or heat sources such as hot air ducts, and do not

leave it in a humid place. Never leave it on the

dashboard of a car parked in direct sunlight or

where there may be a considerable rise in

temperature.

Caution alarm

If you turn the ignition key switch to the OFF

position without removing the front panel, the

caution alarm will beep for a few seconds.

If you connect an optional power amplifier and

do not use the built-in amplifier, the beep

sound will be deactivated.

Getting Started

Resetting the unit

Before operating the unit for the first time or

after replacing the car battery, you must reset

the unit.

Remove the front panel and press the reset

button with a pointed object, such as a

ballpoint pen.

Notes

• Pressing the reset button will erase the clock

setting and some memorised functions.

• When you connect the power supply cord to the

unit or reset the unit, wait for about 10 seconds

before you insert a disc. If you insert a disc within

these 10 seconds, the unit will not be reset, and

you will have to press the reset button again.

Detaching the front panel

You can detach the front panel of this unit to

protect the unit from being stolen.

1 Press (OFF).

2 Press (RELEASE), then slide the front

panel a little to the left, and pull it off

towards you.

(OFF)

(RELEASE)

a

b

Notes

• Be sure not to drop the panel when detaching it

from the unit.

• If you detach the panel while the unit is still

turned on, the power will turn off automatically

to prevent the speakers from being damaged.

• When carrying the front panel with you, use the

supplied front panel case.

6

Setting the clock

The clock uses a 24-hour digital indication.

Example: To set the clock to 10:08

1 Press (SHIFT), then press (2) (SET UP)

repeatedly until “CLOCK” appears.

1 Press (4) (n).

2 Set the hour.

3 Press (4) (n).

4 Set the minute.

to go forward

to go backward

to go forward

to go backward

The hour indication flashes.

The minute indication flashes.

2 Press (SHIFT).

The clock starts.

3 Press (SHIFT).

After the clock setting is complete, the

display returns to normal playback mode.

SOURCE

7

CD Player

Listening to a CD

Insert a CD.

Playback starts automatically.

If a CD is already inserted, press (SOURCE)

repeatedly until “CD” appears to start

playback.

Note

To play back an 8 cm CD, use the optional Sony

compact disc single adapter (CSA-8).

To Press

Stop playback 6 or (OFF)

Eject the CD 6

Labelled side up

Track number

Elapsed playing time

Changing the display item

CDX-C4850R/C4840R:

Each time you press (DSPL) during CD or CD

TEXT disc playback, the item changes as

follows:

*

1

If you inserted a non-CD TEXT disc, “NO NAME“

appears in the display.

*

2

If you play a CD TEXT disc, the artist name

appears in the display after the disc name. (Only

for CD TEXT discs with the artist name.)

CDX-4260R/4250R/4240R/4250RV:

Each time you press (DSPL) during CD

playback, the item changes as follows:

Track number/Elapsed playing time ˜ Clock

After you select the desired item, the display

will automatically change to the Motion

Display mode after a few seconds.

In the Motion Display mode, all the above

items are scrolled in the display one by one in

order.

Tip

The Motion Display mode can be turned off. (See

”Changing the sound and display settings” on

page 19).

$

Track number/

Elapsed playback time

$

Disc name*

1

/Artist name*

2

$

Track name*

1

$

Clock

CD indication

8

Automatically scrolling a disc name

— Auto Scroll (CDX-C4850R/C4840R only)

If the disc name, artist name, or track name on

a CD TEXT disc exceeds 8 characters and the

Auto Scroll function is on, information

automatically scrolls across the display as

follows:

• The disc name appears when the disc has

changed (if the disc name is selected).

• The track name appears when the track has

changed (if the track name is selected).

If you press (DSPL) to change the display

item, the disc or track name of the CD TEXT

disc is scrolled automatically whether you set

the function on or off.

1 During playback, press (SHIFT).

2 Press (2) (SET UP) repeatedly until

“A.SCRL” appears.

3 Press (4) (n) to select “A.SCRL-ON.”

4 Press (SHIFT).

To cancel Auto Scroll, select “A.SCRL-OFF” in

step 3 above.

Note

For some CD TEXT discs with very many characters,

the following cases may happen:

— Some of the characters are not displayed

— Auto Scroll does not work.

Tip

To manually scroll the long name of a CD TEXT disc

after activating the Auto Scroll function , press

(SHIFT), then (1) (N) (manual scroll).

To search backward

To search forward

SEEK/AMS

Locating a specific track

— Automatic Music Sensor (AMS)

During playback, push the SEEK/AMS

control up or down and release for each

track you want to skip.

Locating a specific point in a track

— Manual Search

During playback, push the SEEK/AMS

control up or down and hold. Release

when you have found the desired point.

Note

If “

” or “ ” appears in the

display, that means you have reached the

beginning or the end of the disc and you cannot

go any further.

To locate preceding tracks

To locate succeeding tracks

9

Radio

Memorising stations

automatically

— Best Tuning Memory (BTM)

The unit selects the stations with the strongest

signals and memorises them in the order of

their frequencies. You can store up to 10

stations on each band (FM1, FM2, MW, and

LW).

Caution

When tuning in stations while driving, use

Best Tuning Memory to prevent accidents.

1 Press (SOURCE) repeatedly to select the

tuner.

Each time you press (SOURCE), the source

changes as follows:

* If the corresponding optional equipment is not

connected, this item will not appear.

(CDX-C4850R/C4840R only)

2 Press (MODE) repeatedly to select the

band.

Each time you press (MODE), the band

changes as follows:

3 Press (SHIFT), then press (3) (PLAY

MODE) repeatedly until “B.T.M” appears.

4 Press (4) (n).

The unit stores stations in the order of their

frequencies on the number buttons.

A beep sounds when the setting is stored.

5 Press (SHIFT).

Notes

• The unit does not store stations with weak

signals. If only a few stations can be received,

some number buttons will retain their former

setting.

• When a number is indicated in the display, the

unit starts storing stations from the one currently

displayed.

• If a CD is not in the unit, only the tuner band

appears even if you press (SOURCE).

Playing a CD in various

modes

You can play CDs in various modes:

•REP (Repeat Play) repeats the current track.

•SHUF (Shuffle Play) plays all the tracks in

random order.

Playing tracks repeatedly

— Repeat Play

1 During playback, press (SHIFT).

Every time you press (SHIFT), only the

items you can select light up.

2 Press (6) (REP) repeatedly until ”REP-1“

appears.

Repeat Play starts.

3 Press (SHIFT).

To return to normal playback mode, select

“REP-OFF” in step 2 above.

Playing tracks in random order

— Shuffle Play

1 During playback, press (SHIFT).

2 Press (7) (SHUF) repeatedly until ”SHUF-

1“ appears.

Shuffle Play starts.

3 Press (SHIFT).

To return to normal playback mode, select

“SHUF-OFF” in step 2 above.

z FM1 z FM2 z MW z LW

z TUNER z CD z MD*

D

2 3 4 5 6 7 81

OFF

SHIFT

DSPL

D

10

Receiving the memorised

stations

1 Press (SOURCE) repeatedly to select the

tuner.

2 Press (MODE) repeatedly to select the

band.

3 Press the number button ((1) to (10)) on

which the desired station is stored.

If you cannot tune in a preset

station

Push and release the SEEK/AMS control

up or down to search for the station

(automatic tuning).

Scanning stops when the unit receives a

station. Push the SEEK/AMS control up or

down repeatedly until the desired station is

received.

Note

If the automatic tuning stops too frequently, press

(SHIFT), then press (3) (PLAY MODE) repeatedly

until “LOCAL” (local seek mode) is displayed. Then

press (4) (n) to select “LOCAL-ON.” Press (SHIFT).

Only the stations with relatively strong signals will

be tuned in.

Tip

If you know the frequency of the station you want

to listen to push the SEEK/AMS control up or down

and hold until the desired frequency appears

(manual tuning).

Memorising only the

desired stations

You can preset up to 20 FM stations (10 each

for FM1 and 2), up to 10 MW stations, and up

to 10 LW stations in the order of your choice.

1 Press (SOURCE) repeatedly to select the

tuner.

2 Press (MODE) repeatedly to select the

band.

3 Push the SEEK/AMS control up or down

to tune in the station that you want to

store on the number button.

4 Press and hold the desired number

button ((1) to (10)) until “MEM”

appears.

The number button indication appears in

the display.

Note

If you try to store another station on the same

number button, the previously stored station will

be erased.

11

RDS

Overview of the RDS

function

Radio Data System (RDS) is a broadcasting

service that allows FM stations to send

additional digital information along with the

regular radio programme signal. Your car

stereo offers you a variety of services. Here are

just a few: retuning the same programme

automatically, listening to traffic

announcements, and locating a station by

programme type.

Notes

• Depending on the country or region, not all of

the RDS functions are available.

• RDS may not work properly if the signal strength

is weak or if the station you are tuned to is not

transmitting RDS data.

Displaying the station

name

The name of the current station lights up in the

display.

Select an FM station (page 9).

When you tune in an FM station that

transmits RDS data, the station name

appears in the display.

Note

The “*” indication means that an RDS station is

being received.

Changing the displayed item

Each time you press (DSPL), the item changes

as follows:

Frequency (Station Name) ˜ Clock

After you select the desired item, the display

will automatically change to the Motion

Display mode after a few seconds.

In the Motion Display mode, all the above

items are scrolled in the display one by one in

order.

continue to next page n

If FM stereo reception is poor

— Monaural Mode

1 During radio reception, press (SHIFT),

then press (3) (PLAY MODE) repeatedly

until “MONO” appears.

2 Press (4) (n) repeatedly until “MONO-

ON“ appears.

The sound improves, but becomes

monaural (“ST” disappears).

3 Press (SHIFT).

To return to normal playback mode, select

“MONO-OFF” in step 2 above.

Changing the display item

Each time you press (DSPL), the item changes

as follows:

Frequency ˜ Clock

After you select the desired item, the display

will automatically change to the Motion

Display mode after a few seconds.

In the Motion Display mode, all the above

items are scrolled in the display one by one in

order.

Tip

The Motion Display mode can be turned off. (See

”Changing the sound and display settings” on

page 19).

12

Changing the displayed item

Each time you press (AF/TA), the item changes

as follows:

* Select this to turn on both the AF and TA

functions.

Notes

• When “NO AF” and the station name flash

alternately, it means that the unit cannot find an

alternative station in the network.

• If the station name starts flashing after selecting

a station with the AF function on, this indicates

that no alternative frequency is available. Push

the SEEK/AMS control up or down while the

station name is flashing (within eight seconds).

The unit starts searching for another frequency

with the same PI (Programme Identification) data

(“PI SEEK” appears and no sound is heard). If the

unit cannot find another frequency, “NO PI”

appears, and the unit returns to the previously

selected frequency.

Listening to a regional programme

The “REG-ON” (regional on) function lets you

stay tuned to a regional programme without

being switched to another regional station.

(Note that you must turn the AF function on.)

The unit is factory preset to “REG-ON,” but if

you want to turn off the function, do the

following.

1 During radio reception, press (SHIFT),

then press (3) (PLAY MODE) repeatedly

until “REG” appears.

2 Press (4) (n) repeatedly until “REG-OFF”

appears.

3 Press (SHIFT).

Note that selecting “REG-OFF” might cause

the unit to switch to another regional

station within the same network.

To return to regional on, select “REG-ON” in

step 2 above.

Note

This function does not work in the United

Kingdom and in some other areas.

” TA-ON ” AF TA-ON*

AF-ON “ AF TA-OFF “

Tip

The Motion Display mode can be turned off. (See

”Changing the sound and display settings” on

page 19).

Note

“NO NAME” appears if the received station does

not transmit RDS data.

Retuning the same

programme automatically

— Alternative Frequencies (AF)

The Alternative Frequencies (AF) function

automatically selects and retunes the station

with the strongest signal in a network. By

using this function, you can continuously

listen to the same programme during a long-

distance drive without having to retune the

station manually.

1 Select an FM station (page 9).

2 Press (AF/TA) repeatedly until “AF-ON”

appears.

The unit starts searching for an alternative

station with a stronger signal in the same

network.

Note

When there is no alternative station in the area

and you do not need to search for an alternative

station, turn the AF function off by pressing

(AF/TA) repeatedly until “AF TA-OFF” appears.

Station

98.5MHz

96.0MHz

Frequencies change automatically.

102.5MHz

13

Local link function

(United Kingdom only)

The Local Link function lets you select other

local stations in the area, even if they are not

stored on your number buttons.

1 Press a number button that has a local

station stored on it.

2 Within five seconds, press the number

button of the local station again.

3 Repeat this procedure until the desired

local station is received.

Listening to traffic

announcements

The Traffic Announcement (TA) and Traffic

Programme (TP) data let you automatically

tune in an FM station that is broadcasting

traffic announcements even if you are listening

to other programme sources.

Press (AF/TA) repeatedly until “TA-ON”

or “AF TA-ON” appears.

The unit starts searching for traffic

information stations. “TP” appears in the

display when the unit finds a station

broadcasting traffic announcements.

When the traffic announcement starts,

“TA” flashes. The flashing stops when the

traffic announcement is over.

Tip

If the traffic announcement starts while you are

listening to another programme source, the unit

automatically switches to the announcement and

goes back to the original source when the

announcement is over.

Notes

• “NO TP” flashes for five seconds if the received

station does not broadcast traffic

announcements. Then, the unit starts searching

for a station that broadcasts it.

• When “EON” appears with “TP” in the display,

the current station makes use of broadcast traffic

announcement of other stations in the same

network.

14

To cancel the current traffic

announcement

Press (AF/TA) or (SOURCE).

To cancel all traffic announcements, turn off

the function by pressing (AF/TA) until

“AF␣ TA-OFF” appears.

Presetting the volume of traffic

announcements

You can preset the volume level of the traffic

announcements beforehand so you won’t miss

the announcement. When a traffic

announcement starts, the volume will be

automatically adjusted to the preset level.

1 Select the desired volume level.

2 Press (AF/TA) for two seconds.

“TA” appears and the setting is stored.

Receiving emergency

announcements

If an emergency announcement comes in while

you are listening to the radio, the programme

will be automatically switched to it. If you are

listening to a source other than the radio, the

emergency announcements will be heard if

you set AF or TA to on. The unit will then

automatically switch to these announcements

no matter which source you are listening to at

the time.

Presetting the RDS

stations with the AF and

TA data

When you preset RDS stations, the unit stores

each station’s data as well as its frequency, so

you don’t have to turn on the AF or TA

function every time you tune in the preset

station. You can select a different setting (AF,

TA, or both) for individual preset stations, or

the same setting for all preset stations.

Presetting the same setting for all

preset stations

1 Select an FM band (page 9).

2 Press (AF/TA) repeatedly to select either

“AF-ON”, “TA-ON” or “AF TA-ON” (for

both AF and TA functions).

Note that selecting “AF TA-OFF” stores not

only RDS stations, but also non-RDS

stations.

3 Press (SHIFT), then press (3) (PLAY

MODE) repeatedly until “BTM” appears.

4 Press (4) (n) until ”B.T.M” flashes.

5 Press (SHIFT).

Presetting different settings for

each preset station

1 Select an FM band, and tune in the

desired station (page 10).

2 Press (AF/TA) repeatedly to select either

“AF-ON”, “TA-ON” or “AF TA-ON” (for

both AF and TA functions).

3 Press the desired number button until

“MEM” appears.

Repeat from step 1 to preset other stations.

Tip

If you want to change the preset AF and/or TA

setting after you tune in the preset station, you

can do so by turning the AF or TA function on or

off.

15

Locating a station by

programme type

You can locate the station you want by

selecting one of the programme types shown

below.

Programme types Display

News NEWS

Current Affairs AFFAIRS

Information INFO

Sports SPORT

Education EDUCATE

Drama DRAMA

Culture CULTURE

Science SCIENCE

Varied VARIED

Popular Music POP M

Rock Music ROCK M

Easy Listening EASY M

Light Classical LIGHT M

Classical CLASSICS

Other Music Type OTHER M

Weather WEATHER

Finance FINANCE

Children’s programmes CHILDREN

Social Affairs SOCIAL A

Religion RELIGION

Phone In PHONE IN

Travel TRAVEL

Leisure LEISURE

Jazz Music JAZZ

Country Music COUNTRY

National Music NATION M

Oldies Music OLDIES

Folk Music FOLK M

Documentary DOCUMENT

Not specified NONE

Note

You cannot use this function in some countries

where no PTY (Programme Type selection) data is

available.

1 Press (PTY/LIST) during FM reception

until “PTY” appears.

The current programme type name appears

if the station is transmitting the PTY data.

“- - - - -” appears if the received station is

not an RDS station, or if the RDS data has

not been received.

2 Press (PTY/LIST) repeatedly until the

desired programme type appears.

The programme types appear in the order

shown in the above table. Note that you

cannot select “NONE” (Not specified) for

searching.

3 Push the SEEK/AMS control up or down.

The unit starts searching for a station

broadcasting the selected programme type.

When the unit finds the programme, the

programme type appears again for five

seconds.

“NO” and the programme type appear

alternately for five seconds if the unit

cannot find the programme type. It then

returns to the previous selected station.

16

Setting the clock

automatically

The CT (Clock Time) data from the RDS

transmission sets the clock automatically.

1 During radio reception, press (SHIFT),

then press (2) (SET UP) repeatedly until

“CT” appears.

2 Press (4) (n) repeatedly until “CT-ON”

appears.

The clock is set.

3 Press (SHIFT) to return to the normal

display.

To cancel the CT function

Select “CT-OFF” in step 2 above.

Notes

• The CT function may not work even though an

RDS station is being received.

• There might be a difference between the time

set by the CT function and the actual time.

SOUND

LIST

MODE

SOUND

LIST

MODE

Other Functions

You can also control this unit with an optional

rotary commander.

Labelling the rotary

commander

Depending on how you mount the rotary

commander, attach the appropriate label as

shown in the illustration below.

17

By rotating the control

(the SEEK/AMS control)

Rotate the control momentarily and

release it to:

•Locate a specific track on a disc. Rotate

and hold the control until you locate the

specific point in a track, then release it to

start playback.

•Tune in stations automatically. Rotate and

hold the control to find a specific station.

By pushing in and rotating the

control (the PRESET/DISC control)

Push in and rotate the control to:

•Receive the stations memorised on the

number buttons.

•Change the disc. (CDX-C4850R/C4840R

only)

Using the rotary

commander

The rotary commander works by pressing

buttons and/or rotating controls.

CDX-C4850R/C4840R only:

You can also control optional CD or MD units

with the rotary commander.

By pressing buttons

(the SOURCE and MODE buttons)

Each time you press (SOURCE), the

source changes as follows:

TUNER n CD n MD*

* If the corresponding optional equipment is

not connected, this item will not appear.

(CDX-C4850R/C4840R only)

Pressing (MODE) changes the operation

in the following ways;

• Tuner: FM1 n FM2 n MW n LW

• CD unit: CD1 n CD2 n …

• MD unit: MD1 n MD2 n …

(SOURCE)

(MODE)

18

Changing the operative direction

The operative direction of controls is factory-

set as shown below.

If you need to mount the rotary commander on

the right hand side of the steering column, you

can reverse the operative direction.

Press (SOUND) for two seconds while

pushing the VOL control.

Tip

You can also change the operative direction of

these controls with the unit (page 19).

Rotate the VOL control to

adjust the volume.

Press (OFF) to

turn off the

unit.

Press (SOUND) to adjust the

volume and sound menu.

To increase

To decrease

Press (LIST) to display the

memorised names.

Press (ATT) to

attenuate the

sound.

Other operations

OFF

Adjusting the sound

characteristics

You can adjust the bass, treble, balance, and

fader.

You can store the bass and treble levels

independently for each source.

1 Select the item you want to adjust by

pressing (SOUND) repeatedly.

VOL (volume) n BAS (bass) n

TRE (treble) n BAL (left-right) n

FAD (front-rear)

2 Adjust the selected item by rotating the

dial.

Adjust within three seconds after selecting

the item. (After three seconds, the dial

function reverts to volume control.)

Attenuating the sound

Press (ATT) on the optional rotary

commander.

“ATT-ON” flashes momentarily.

To restore the previous volume level, press

(ATT) again.

Tip

The unit decreases the volume automatically when

a telephone call comes in (Telephone ATT

function). (CDX-C4850R/4250R/4250RV only)

19

Changing the sound and

display settings

The following items can be set:

•CLOCK (page 6).

•CT (Clock Time) (page 16).

•D.INFO (Dual Information) - to display the

clock and the play mode at the same time

(ON) or to display the information

alternately (OFF).

•AMBER/GREEN - to change the illumination

colour to amber or green. (CDX-C4850R/

C4840R only)

•DIM (Dimmer)-to change the brightness of

the display. (CDX-C4850R/C4840R/4260R/

4250R/4240R only)

— Select “ON” to dim the display.

•BEEP - to turn on or off the beeps.

•RM (Rotary Commander) - to change the

operative direction of the controls of the

rotary commander.

— Select “NORM” to use the rotary

commander as the factory-set position.

— Select “REV” when you mount the rotary

commander on the right side of the

steering column.

•M.DSPL (Motion Display) - to turn the

motion display on or off.

•A.SCRL (Auto Scroll) (page 8, 21).

(CDX-C4850R/C4840R only)

Note

If you connect an optional power amplifier and do

not use the buit-in amplifier, the beep sound will

be disabled.

1 Press (SHIFT).

2 Press (2) (SET UP) repeatedly until the

desired item appears.

Each time you press (2) (SET UP), the item

changes as follows:

CLOCK n CT n D.INFO* n AMBER/GREEN n

DIM n BEEP n RM n M.DSPL n A.SCRL*

* When no CD or MD is playing, this item will

not appear.

Note

The displayed item will differ depending on

the source.

3 Press (4) (n) to select the desired

setting (Example: ON or OFF).

4 Press (SHIFT).

After the mode setting is complete, the

display returns to normal playback mode.

20

With Optional Equipment

CD/MD Unit

(CDX-C4850R/C4840R only)

This unit can control a maximum of seven

external CD/MD units in this configuration:

CD unit - maximum of five

MD unit - maximum of five.

Any combination up to seven will work.

If you connect an optional CD unit with the

CD TEXT function, the CD TEXT information

will appear in the display when you play a CD

TEXT disc.

Playing a CD or MD

1 Press (SOURCE) repeatedly to select CD

or MD.

2 Press (MODE) until the desired unit

appears.

CD/MD playback starts.

When a CD/MD unit is connected, all the

tracks play from the beginning.

Changing the display item

Each time you press (DSPL) during CD, CD

TEXT, or MD playback, the item changes as

follows:

$

Track number/

Elapsed playback time

$

Disc name*

1

/Artist name*

2

$

Track name*

3

$

Clock

*

1

If you have not labelled the disc or if there is no

disc name prerecorded on the MD, “NO NAME”

appears in the display.

*

2

If you play a CD TEXT disc, the artist name

appears in the display after the disc name. (Only

for CD TEXT discs with the artist name.)

*

3

If the track name of a CD TEXT disc or MD is not

prerecorded, “NO NAME” appears in the

display.

Boosting the bass sound

— D-bass

You can enjoy a clear and powerful bass

sound. The D-bass function boosts the low

frequency signal with a sharper curve than

conventional bass boost.

You can hear the bass line more clearly even

while the vocal volume remains the same. You

can emphasise and adjust the bass sound

easily with the D-BASS control.

Adjusting the bass curve

Turn the D-BASS control to adjust the

bass level (1, 2 or 3).

“D-BASS” appears in the display.

To cancel, turn the control to OFF.

Note

If the bass sound becomes distorted, adjust the D-

BASS control or volume.

Level

Frequency (Hz)

0dB

D-BASS 3

D-BASS 2

D-BASS 1

Sidan laddas ...

Sony CDX-C4840R Användarmanual

Sony CDX-C4840R Användarmanual

på andra språk

Relaterade papper