9
COFFEE BREWER · CM9B-T125, CM9T-T125
EN
THERMO JUG
Insert the lid with the arrow pointing on UNLOCK.
POUR
Twist the lid clockwise until the arrow is on LOCK. Twist it anti-clockwise so the
arrow aligns with the spout and the dot. (1,2,3)
CLOSE
After pouring, close the lid by twisting it clockwise until the arrow is on LOCK. (2)
TIPS
• Rinse the coffee lter in water to remove any unwanted taste prior to brewing.
• Always use fresh coffee. You will obtain the best results if the coffee you use
is freshly ground. Grounded coffee loose many of its aromas just after a few
minutes and by grinding the coffee yourself just before you brew, you keep all
the good aromas for the best coffee taste.
• You can use one of Wilfa’s coffee grinders suitable for grinding lter coffee.
Using different degrees of grinding will affect the coffee’s strength and taste.
• The enclosed lter holder has a manual drip stop. Wilfa does not recommend
serving coffee before the lter process is completed, since this will diminish
the nal coffee result.
• If even hotter coffee is desired, the thermo jug should be rinsed with hot
water prior to brewing. This is especially recommended if you are making 0.5
litres of coffee or less.
• If the coffee maker has not been used for a while it is recommended to run
clean water through the unit prior to use.
• Coffee residue will always stay on parts in contact with the coffee. For
optimal coffee taste, you should clean the lter holder, thermo jug and jug lid
regularly.
• Do not use the thermo jug to ll the water tank with fresh water as coffee
residues will inuence on the quality of the brewed coffee.