Yamaha TSX-B72 Bruksanvisning

Kategori
Väckarklockor
Typ
Bruksanvisning
ULV
OWNER'S MANUAL
MODE D'EMPLOI
MANUAL DE INSTRUCCIONES
En Fr Es
i En
1 Read these instructions.
2 Keep these instructions.
3 Heed all warnings.
4 Follow all instructions.
5 Do not use this apparatus near water.
6 Clean only with dry cloth.
7 Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
8 Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
9 Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug has
two blades and a third grounding prong. The wide blade
or the third prong are provided for your safety. If the
provided plug does not fit into your outlet, consult an
electrician for replacement of the obsolete outlet.
10 Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the
point where they exit from the apparatus.
11 Only use attachments/accessories specified by the
manufacturer.
12 Use only with the cart, stand, tripod,
bracket, or table specified by the
manufacturer, or sold with the apparatus.
When a cart is used, use caution when
moving the cart/apparatus combination to
avoid injury from tip-over.
13 Unplug this apparatus during lightning storms or when
unused for long periods of time.
14 Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or plug
is damaged, liquid has been spilled or objects have fallen
into the apparatus, the apparatus has been exposed to rain
or moisture, does not operate normally, or has been
dropped.
Yamaha and the Electronic Industries Association’s Consumer Electronics Group want you to get the most out
of your equipment by playing it at a safe level. One that lets the sound come through loud and clear without
annoying blaring or distortion – and, most importantly, without affecting your sensitive hearing. Since hearing
damage from loud sounds is often undetectable until it is too late, Yamaha and the Electronic Industries
Association’s Consumer Electronics Group recommend you to avoid prolonged exposure from excessive
volume levels.
IMPORTANT SAFETY INSTRUCTIONS
CAUTION
RISK OF ELECTRIC SHOCK DO
NOT OPEN
CAUTION: TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK). NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
Explanation of Graphical Symbols
The lightning flash with arrowhead symbol,
within an equilateral triangle, is intended to
alert you to the presence of uninsulated
“dangerous voltage” within the product’s
enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to
persons.
The exclamation point within an equilateral
triangle is intended to alert you to the
presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.
IMPORTANT
Please record the serial number of this unit in the space
below.
MODEL:
Serial No.:
The serial number is located on the rear of the unit. Retain
this Owner’s Manual in a safe place for future reference.
We Want You Listening For A Lifetime
ii En
IMPORTANT SAFETY INSTRUCTIONS
En
FCC INFORMATION (for US customers)
1 IMPORTANT NOTICE: DO NOT MODIFY THIS
UNIT!
This product, when installed as indicated in the
instructions contained in this manual, meets FCC
requirements. Modifications not expressly approved
by Yamaha may void your authority, granted by the
FCC, to use the product.
2 IMPORTANT: When connecting this product to
accessories and/or another product use only high
quality shielded cables. Cable/s supplied with this
product MUST be used. Follow all installation
instructions. Failure to follow instructions could void
your FCC authorization to use this product in the
USA.
3 NOTE: This product has been tested and found to
comply with the requirements listed in FCC
Regulations, Part 15 for Class “B” digital devices.
Compliance with these requirements provides a
reasonable level of assurance that your use of this
product in a residential environment will not result in
harmful interference with other electronic devices.
This equipment generates/uses radio frequencies and,
if not installed and used according to the instructions
found in the users manual, may cause interference
harmful to the operation of other electronic devices.
Compliance with FCC regulations does not guarantee
that interference will not occur in all installations. If
this product is found to be the source of interference,
which can be determined by turning the unit “OFF”
and “ON”, please try to eliminate the problem by
using one of the following measures:
Relocate either this product or the device that is being
affected by the interference.
Utilize power outlets that are on different branch
(circuit breaker or fuse) circuits or install AC line
filter/s.
In the case of radio or TV interference, relocate/
reorient the antenna. If the antenna lead-in is 300 ohm
ribbon lead, change the lead-in to coaxial type cable.
If these corrective measures do not produce
satisfactory results, please contact the local retailer
authorized to distribute this type of product. If you can
not locate the appropriate retailer, please contact
Yamaha Corporation of America A/V Division, 6600
Orangethorpe Avenue, Buena Park, CA 90620, USA.
The above statements apply ONLY to those products
distributed by Yamaha Corporation of America or its
subsidiaries.
FCC CAUTION
Change or modifications not expressly approved by the
party responsible for compliance could void the user’s
authority to operate the equipment.
FOR CANADIAN CUSTOMERS
To prevent electric shock, match wide blade of plug to
wide slot and fully insert.
CAN ICES-3 (B)/NMB-3(B)
This device complies with Part 15 of the FCC Rules and RSSGen of IC Rules.
Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device
must accept any interference received including interference that may cause undesired operation of this device.
See the “TROUBLESHOOTING” section at the end of this manual if interference to radio reception is suspected.
NOTICE
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
This equipment compiles with FCC/IC radiation exposure limits set forth for uncontrolled equipment and meets the FCC
radio frequency (RF) Exposure Guidelines in Supplement C to OET65 and RSS-102 of the IC radio frequency (RF)
Exposure rules. This equipment has very low levels of RF energy that it deemed to comply without maximum permissive
exposure evaluation (MPE). But it is desirable that it should be installed and operated with at least 20 cm and more between
the radiator and person’s body (excluding extremities: hands, wrists, feet and ankles).
This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.
iii En
1 To assure the finest performance, please read this
manual carefully. Keep it in a safe place for future
reference.
2 Install this unit in a well ventilated, cool, dry, clean
place - away from direct sunlight, heat sources,
vibration, dust, moisture and cold. For proper
ventilation, allow the following minimum clearances.
Top: 15 cm (6 in)
Rear: 10 cm (4 in)
Sides: 10 cm (4 in)
3 Locate this unit away from other electrical
appliances, motors, or transformers to avoid
humming sounds.
4 Do not expose this unit to sudden temperature
changes from cold to hot, and do not locate this unit
in an environment with high humidity (i.e. a room
with a humidifier) to prevent condensation inside this
unit, which may cause an electrical shock, fire,
damage to this unit, and/or personal injury.
5 Avoid installing this unit where foreign object may
fall onto this unit and/or this unit may be exposed to
liquid dripping or splashing. On the top of this unit,
do not place:
Other components, as they may cause damage
and/or discoloration on the surface of this unit.
Burning objects (i.e. candles), as they may cause
fire, damage to this unit, and/or personal injury.
Containers with liquid in them, as they may fall
and liquid may cause electrical shock to the user
and/or damage to this unit.
6 Do not cover this unit with a newspaper, tablecloth,
curtain, etc. in order not to obstruct heat radiation. If
the temperature inside this unit rises, it may cause
fire, damage to this unit, and/or personal injury.
7 Do not plug in this unit to a wall outlet until all
connections are complete.
8 Do not operate this unit upside-down. It may
overheat, possibly causing damage.
9 Do not use force on switches, knobs and/or cords.
10 When disconnecting the power cable from the wall
outlet, grasp the plug; do not pull the cable.
11 Do not clean this unit with chemical solvents; this
might damage the finish. Use a clean, dry cloth.
12 Only voltage specified on this unit must be used.
Using this unit with a higher voltage than specified is
dangerous and may cause fire, damage to this unit,
and/or personal injury. Yamaha will not be held
responsible for any damage resulting from use of this
unit with a voltage other than specified.
13 To prevent damage by lightning, keep the power
cable disconnected from a wall outlet or this unit
during a lightning storm.
14 Do not attempt to modify or fix this unit. Contact
qualified Yamaha service personnel when any
service is needed. The cabinet should never be
opened for any reasons.
15 When not planning to use this unit for long periods of
time (i.e. vacation), disconnect the AC power plug
from the wall outlet.
16 Be sure to read the “TROUBLESHOOTING” section
on common operating errors before concluding that
this unit is faulty.
17 Before moving this unit, press to set the system to
off, and disconnect the AC power plug from the wall
outlet.
18 Condensation will form when the surrounding
temperature changes suddenly. Disconnect the power
cable from the outlet, then leave this unit alone.
19 When using this unit for a long time, this unit may
become warm. Turn the system off, then leave this
unit alone for cooling.
20 Install this unit near the wall outlet and where the AC
power plug can be reached easily.
21 Be sure to use the AC adaptor supplied with this unit.
Using an AC adaptor other than the one provided
may cause fire or damage to this unit.
CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.
This unit is not disconnected from the AC power source
as long as it is connected to the wall outlet, even if this
unit itself is turned off by . In this state, this unit is
designed to consume a very small quantity of power.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR
MOISTURE.
There is a chance that placing this unit too close to a
CRT-based (Braun tube) TV set might impair picture
color. Should this happen, move this unit away from the
TV set.
Do not use this unit within 22 cm (9 inches) of persons
with a heart pacemaker implant or defibrillator implant.
Radio waves may affect electro-medical devices.
Do not use this unit near medical devices or inside
medical facilities.
1 En
En
PREPARATION
Features
High quality playback of Bluetooth enabled smartphone/tablet computer, and radio and external devices.
One touch pairing enabled by NFC technology.
Firm bass sound and spacious stereo sound from 2.1 ch powered speaker (tweeter × 2, woofer × 1),
SR-Bass™ (Yamaha Swing Radiator Bass technology) and DSP in a compact unit.
Easy user-intuitive interface by buttons with Guide LED and knob dials.
Convenient operability enabled by using iPhone/Android smartphone as a remote control.
Supports the dedicated application, “DTA CONTROLLER.”
USB port for supplying power.
indicates precautions for use of the unit and its feature limitations.
indicates supplementary explanations for better use.
Supplied accessories
NAMES OF PARTS AND THEIR FUNCTIONS .................................................................................... 2
BASIC FUNCTIONS................................................................................................................................... 4
USING USEFUL FUNCTIONS ................................................................................................................. 6
LISTENING TO RADIO STATIONS....................................................................................................... 8
CHARGING WITH THE USB PORT ......................................................................................................9
LISTENING TO EXTERNAL SOURCES ............................................................................................... 9
LISTENING TO MUSIC FROM YOUR Bluetooth COMPONENT ................................................... 10
TROUBLESHOOTING ............................................................................................................................ 13
SPECIFICATIONS ................................................................................................................................... 15
Note
y
AC adaptor Power cable
(DC 15 V, 2.56A,
model number:
EADP-38EB A)
AM Antenna
(U.S.A. and Canada
models only)
USB cap
Note
Keep the USB cap out of reach
of children so as to ensure that
it is not mistakenly swallowed.
CONTENTS
2 En
Front panel
Top panel
NAMES OF PARTS AND THEIR FUNCTIONS
1 Front panel display
2 SOURCE: Bluetooth, AUX, RADIO
3 VOLUME: Volume control
4 PRESET: Stores up to five favorite FM (all models)
and five AM (U.S.A. and Canada models only) radio
stations ( P. 8).
5 Illumination sensor: Measures surrounding
illuminance. Do not cover this sensor when
DIMMER (E) is set to A (auto).
6 CHARGING: Supplies 5V/2.1A to a portable
device, such as a smartphone, when it is connected
with a USB cable ( P. 9).
7 (Bluetooth): Press this button:
– to terminate Bluetooth connection when it is
established ( P. 12).
– to establish connection with the component that
was most recently connected via Bluetooth
( P. 12).
8 : Press to turn the system on/off.
Time is displayed even when the system is off.
y
Press and hold for more than 3 seconds to set the
system to standby mode. All the information on the
front panel display is not displayed in standby mode.
This can reduce power consumption. To cancel standby
mode, press .
Even in system off/standby mode, the alarm function is
available.
NAMES OF PARTS AND THEIR FUNCTIONS
3 En
En
Rear panel
9 ALARM: Alarm on/off ( P. 5)
0 SET: Alarm setting ( P. 4)
A NFC mark: Allows easy pairing with NFC
technology ( P. 11).
B SNOOZE/SLEEP ( P. 5)
C FM, AM: Switches FM/AM
(U.S.A. and Canada models only)
D MEMORY ( P. 8)
E DIMMER: Sets the brightness of the top and front
panel
A (auto) 3 (brightest) 2 1 (darkest)
back to A
y
When A (auto) is set, the brightness of the top and front
panel is adjusted automatically according to the
brightness of the room.
F TUNING ( P. 8)
Extending rod antenna
Connecting the AM Antenna
(U.S.A. and Canada models only)
15V : Connect the supplied
AC adaptor and power cable.
AUX: Connect an external
device. ( P. 9)
FM Rod Antenna
(See below.)
ALARM TYPE switch ( P. 4)
CLOCK switch ( P. 4)
AM Antenna
terminal
(U.S.A. and
Canada models
only. See
below.)
When you listen to FM, extend the
antenna.
If FM reception is poor, change the
height or direction of the antenna, or
relocate the unit.
Notes
FM Rod Antenna
Assembling
AM Antenna
AM Antenna
Place the antenna in a location with good signal reception.
Signal reception may be inadvertently affected if a digital device is
located near the antenna.
Notes
4 En
OPERATION
This unit can play back radio and/or beep sound at the set time.
Setting the time and sound
BASIC FUNCTIONS
Adjusting the clock
A Set CLOCK to SET.
B Set the time with TUNING.
C Set CLOCK to LOCK.
The time settings are lost approximately one
week after unplugging the unit.
Alarm setting
A Press SET.
B Set the alarm time with
TUNING.
An alarm will sound only once at the
specified time.
C Set ALARM TYPE.
SOURCE+BEEP: radio (played
back from 3 minutes before the
alarm time) and beep sound (played
back at the alarm time)
SOURCE: this unit plays back the
radio station you listened to last
time.
BEEP: beep sound only
D Set the alarm volume.
E Press SET.
Alarm is set and the alarm indicator
( ) lights up.
Rear panel
Front panel display
flashes.
Note
Alarm indicator ( )
flashes and the front
panel display indicates
alarm mode.
Rear panel
BASIC FUNCTIONS
5 En
En
Switching the alarm on/off
At the set time, alarm sound plays back. During playback, operations below are available.
Using the snooze function
Stopping the alarm
You can set the time until the system turns off automatically when the sleep function is set to on.
Press ALARM.
When the alarm is on, the alarm
indicator ( ) lights up and alarm
time is displayed for a while.
Operations during playing back alarm sound
Press SNOOZE/SLEEP.
The alarm sound stops and resumes
after 5 minutes.
y
•If SOURCE+BEEP is set as the alarm type,
you can press SNOOZE/SLEEP once to
stop the beep sound, and twice to stop the
audio source. Five minutes after the audio
source is stopped, it will start fading in again
and the beep sound will resume.
When the snooze function is activated, alarm
indicator flashes.
Press ALARM or .
y
Unless you stop the alarm, the alarm stops
after 60 minutes automatically.
When you stop the alarm, the alarm time
setting, etc., is saved for convenient use next
time.
Sleep setting
Select the sleep time.
You can set 30, 60, 90 or 120 minutes.
When the sleep function is on, the
sleep indicator ( ) lights up.
y
To cancel the sleep function, press SNOOZE/
SLEEP.
Sleep indicator ( ) and front
panel display flash.
Press repeatedly.
6 En
OPERATION
If you cannot access the above information, search for “DTA CONTROLLER” on App Store or Google Play.
iPad, iPhone, and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries.
Android and Google Play are trademarks of Google, Inc.
USING USEFUL FUNCTIONS
DTA CONTROLLER
With the DTA CONTROLLER application installed on your smartphone or tablet
computer, you can use further convenient features of Yamaha desktop audio systems.
To download the application, or obtain the latest information on it, access App Store or
Google Play via the QR codes listed below.
iPhone, iPad, iPod touch Android™
http://itunes.com/app/dtacontroller https://play.google.com/store/apps/
details?id=com.yamaha.av.dtacontr
oller
(U.S.A.)
https://itunes.apple.com/us/app/dta-
controller-us/id549333293?mt=8
Notes
USING USEFUL FUNCTIONS
7 En
En
Once you have set Weekly Alarm by “DTA CONTROLLER”, you can select the Weekly Alarm mode in the
alarm mode select display of this unit.
Alarm setting using DTA CONTROLLER
The Weekly Alarm mode cannot be selected
when all the days of the Weekly Alarm setting
are turned off. Turn on any day of the Weekly
Alarm setting.
A Press SET.
B Select the alarm mode with
TUNING.
C Press SET.
If you have chosen Weekly Alarm
mode, this completes the alarm
setting. The alarm indicator ( )
and the Weekly Alarm indicator
( ) will light up.
D Set the alarm time with
TUNING.
E Set ALARM TYPE.
F Set the alarm volume.
G Press SET.
Alarm is set and the alarm indicator
( ) lights up.
y
The alarm setting will be saved even if the
alarm is turned off.
If the alarm is turned on again by pressing
ALARM, the alarm will sound with the
previous alarm settings.
1d (One Day Alarm mode):
An alarm that sounds only once at the
specified time.
7d (Weekly Alarm mode):
An alarm whose time can be specified
for each day of the week (settable
only using “DTA CONTROLLER”).
One Day Alarm
Weekly Alarm
Note
One Day Alarm
Weekly Alarm
Alarm indicator ( )
flashes and the front
panel display indicates
alarm mode.
Rear panel
8 En
You can store up to five favorite FM (all models) and five AM (U.S.A. and Canada models only) radio stations
with the preset function.
LISTENING TO RADIO STATIONS
Tuning radio stations
A Set SOURCE to RADIO.
B Select FM/AM.
(U.S.A. and Canada models only)
C For automatic tuning, press
and hold TUNING.
For manual tuning, press
TUNING repeatedly.
If you tune to a station manually during FM
reception, the sound is monaural.
Presetting radio stations
A Tune into a favorite radio
station.
B Press MEMORY.
C Select the PRESET number
you want to store to.
y
To cancel the preset, press TUNING again.
D Press MEMORY to complete.
Selecting preset radio stations
A Set SOURCE to RADIO.
B Select FM/AM.
(U.S.A. and Canada models only)
C Select the preset radio station
with PRESET.
(U.S.A. and Canada
models only)
Note
(U.S.A. and Canada
models only)
9 En
En
Connecting a portable device such as a smartphone or tablet computer to the USB port on this unit charges the
connected device (power supply of up to 5V/2.1A is supported).
Prepare a USB cable that is compatible with the portable device and confirm that the device is supported for
charging via USB connection before use. In addition, read the documentation provided with the portable
device.
Playing back
CHARGING WITH THE USB PORT
A
Connect your portable device
to the USB port on this unit
using a commercially available
USB cable.
Charging automatically starts.
B Disconnect the USB cable
from the unit when charging
completes.
Check the charging status on the
portable device.
Charging may not be possible depending on
the portable device.
The USB port is for charging use only. The
USB port does not support audio playback.
In standby mode, power supply stops, and
charging is not available.
This unit does not function as memory
storage.
Yamaha will not be held responsible for any
damage to the portable device or data loss
occurred while using this unit.
Disconnect the USB cable immediately after
charging completes, since power continues to
be supplied to the connected device.
LISTENING TO EXTERNAL SOURCES
Playing back external sources
A Connect your portable audio
device to AUX using a
commercially available 3.5 mm
(1/8 in) mini plug cable.
Turn down the volume of this unit and your
portable audio device before connection.
B Set SOURCE to AUX.
C
Start playback on the connected
portable audio device.
USB cable from portable device
Top panel
Notes
Rear panel
Note
10 En
This unit provides Bluetooth functionality. You can enjoy wireless music playback from your Bluetooth
component (smartphone, digital audio player, etc.). Please also refer to the owner’s manual of your Bluetooth
component.
Install in a stable place, being careful of the following points:
Do not place on top of steel or other metal plates.
Do not cover with a cloth, etc.
Install in the same room as the device with which signals are to be exchanged (Bluetooth profile A2DP
compatible portable music player, mobile phone, etc.) within a direct, line-of-sight distance of 10 m (33 ft).
Make sure there are no obstacles between this unit and the Bluetooth component.
Pairing is an operation that registers the communicating component (subsequently called “the other
component”) with this unit. You will need to perform the pairing operation the first time you use your
Bluetooth component with this unit, or if the pairing settings have been deleted. Once pairing has been
completed, subsequent reconnection will be easy even after the Bluetooth connection is disconnected. If pairing
is not successful, refer to the item “Bluetooth” in “TROUBLESHOOTING” ( P. 13).
y
This unit can be paired with up to eight other components. When pairing with the ninth component has succeeded, pairing
data for the component with the oldest connection date will be deleted.
If this unit is connected via Bluetoot h to another component, press (Bluetooth) on this unit to disconnect the Bluetooth
connection before you perform the pairing operation.
If using an iPhone/iPad/iPod touch
LISTENING TO MUSIC FROM YOUR Bluetooth COMPONENT
Installation
Within 10 m (33 ft)
Pairing this unit with your Bluetooth component
A
Set
SOURCE
to (Bluetooth).
B On your iPhone/iPad/iPod
touch, turn [Settings]
[Bluetooth] on.
The Bluetooth connection list will
appear in [Devices].
(This procedure or display may differ
depending on the type of your iPhone/
iPad/iPod touch.)
C From the Bluetooth connection
list of the other component,
choose this unit (TSX-B72
Yamaha).
When pairing has been completed,
your iPhone/iPad/iPod touch will
indicate “Connected”.
The Bluetooth indicator on the front
panel display of this unit will light.
Bluetooth indicator
ABC
LISTENING TO MUSIC FROM YOUR Bluetooth COMPONENT
11 En
En
If using other than an iPhone/iPad/iPod touch
A Set SOURCE to (Bluetooth).
B Perform Bluetooth pairing on the other component.
For details, refer to the owner’s manual of the other component.
C From the Bluetooth connection list of the other component, choose this unit (TSX-B72
Yamaha).
When pairing has been completed, the Bluetooth indicator on the front panel display of this unit will light
for about 1 second.
y
If you are prompted for a passkey, enter the numerals “0000”.
Easy pairing
For the smartphone with NFC (Near Field Communication) function, you can easily perform the pairing
operation just by touching the NFC mark on this unit with your smartphone (you need to turn the system on and
turn on the NFC function of the connecting component beforehand).
A
Press to turn the system on.
B Perform the pairing operation
at the connecting component
(for details, please read the
owner’s manual of the
connecting component).
This unit is indicated as “TSX-B72
Yamaha” on the connecting
component.
y
If you are prompted for a passkey, enter the
numerals0000”.
If the connection fails, move the
smartphone slowly on the NFC mark.
If the smartphone is equipped with a case,
remove the case.
NFC
mark
LISTENING TO MUSIC FROM YOUR Bluetooth COMPONENT
12 En
Once pairing with a component has been completed, connecting with that component via Bluetooth will be
easy next time.
Connecting from this unit
Set SOURCE to (Bluetooth).
The Bluetooth indicator will blink on the front panel display; this unit will search for the other component
that was most recently connected via Bluetooth, and will then establish a connection (You must first turn on
the Bluetooth setting of the other component).
When the Bluetooth connection has been established, the Bluetooth indicator will light.
Yamaha does not guarantee all connections between this unit and Bluetooth component.
y
Pressing (Bluetooth) on the top panel of this unit also establishes connection with the component that was most recently
connected via Bluetooth; however, SOURCE is not automatically set to (Bluetooth).
Connecting from the other component
A In the Bluetooth settings of the other component, turn Bluetooth on.
B From the Bluetooth connection list of the other component, choose this unit (TSX-B72
Yamaha).
The Bluetooth connection will be established, and the Bluetooth indicator on the front panel display of this
unit will light.
Bluetooth connections cannot be established from the other component when this unit is in standby mode. Turn the system on.
If any of the following operations are performed while a Bluetooth connection is being used, the Bluetooth
connection will be disconnected.
Press (Bluetooth) on the top panel of this unit.
Turn the system off.
Turn off the Bluetooth setting of the other component.
Listening to a Bluetooth component
A
Set
SOURCE
to (Bluetooth).
B Connect this unit and your other
component via Bluetooth.
C Play back music from your Bluetooth
component.
Take care that the volume setting of this unit is not too high. We
recommend that you adjust the volume on the other component.
y
While the system is turned off, if you connect a Bluetooth
component to the unit and play back music, the system will
automatically turn on.
If you disconnect the Bluetooth connection from your other
component while the playback source is set to Bluetooth, this
unit will automatically turn off the system.
•If Bluetooth is selected as the playback source, this unit will
automatically turn off the system when 60 minutes have
elapsed without any Bluetooth connection nor any operation
performed.
Connecting an already-paired component via Bluetooth
Bluetooth
indicator
Note
Note
Note
Disconnecting a Bluetooth connection
13 En
En
Refer to the table below if the unit does not operate properly. If the problem you are experiencing is not listed
below, or if the instruction below does not help, turn off the unit, disconnect the power cable, and contact the
nearest authorized Yamaha dealer or service center.
TROUBLESHOOTING
General
Problem Cause Solution
The speakers make no
sound.
The volume may be set to the minimum
level.
Adjust the volume level.
The source may be incorrect. Select the correct source.
Sound suddenly turns off.
The sleep function ( P. 5) may be set. Turn on the system and play the source again.
Sound is cracked/
distorted or there is
abnormal noise.
Input source volume is excessive, or
volume of this unit is excessive.
Adjust the volume with VOLUME, or adjust
the sound with the tone control of DTA
CONTROLLER.
The unit does not operate
properly.
The unit may have received a strong
electrical shock such as lightning or
excessive static electricity, or power
supply may have dropped.
Set the system to off, and disconnect the
power cable. Wait about 30 seconds,
reconnect the power cable, and turn on the
system.
The system turns on but
immediately shuts off.
The power cable may be connected
improperly.
Make sure the power cable is plugged into the
wall outlet firmly.
The unit may have received a strong
electrical shock such as lightning or
excessive static electricity.
Set the system to off, and disconnect the
power cable. Wait about 30 seconds,
reconnect the power cable, and turn on the
system.
A digital or high-frequency
equipment produces
noises.
The unit may be placed too close to the
digital or high-frequency equipment.
Place the unit farther away from the
equipment.
The clock setting has been
cleared.
The unit is left more than one week after
you disconnect the power cable from the
wall outlet.
Plug the power cable into the wall outlet
firmly, and set the clock again ( P. 4).
RADIO does not play at
the alarm time.
ALARM TYPE is set to BEEP.Set ALARM TYPE to SOURCE+BEEP or
SOURCE ( P. 4).
Clock flashes and the unit
cannot be operated.
CLOCK on the rear panel is set to SET,
and this unit is in clock setting mode.
Set CLOCK to LOCK.
Radio reception
Problem Cause Solution
Too much noise during
stereo broadcast.
The radio station you selected may be far
from your area, or the radio wave
reception is weak in your area.
Try manual tuning to improve the signal
quality ( P. 8) or change the height or
direction of the antenna, or relocate the unit
( P. 3).
AM broadcast cannot be
received.
The AM Antenna (supplied) may have
been disconnected.
Make sure that the AM Antenna is connected
properly ( P. 3).
TROUBLESHOOTING
14 En
Resetting the unit
If the unit does not function properly, resetting the unit may solve the problem. To reset the unit, press and hold
for more than 10 seconds.
Bluetooth
Problem Cause Solution
Cannot make this unit
paired with the other
component.
The other component does not support
A2DP.
Perform pairing operations with a component
which supports A2DP.
A Bluetooth adaptor, etc. that you want to
pair with this unit has a password other
than “0000”.
Use a Bluetooth adaptor, etc. whose password
is “0000”.
This unit and the other component are too
far apart.
Move the other component closer to this unit.
There is a device (microwave oven,
wireless LAN, etc.) that outputs signals in
the 2.4 GHz frequency band nearby.
Move this unit away from the device that is
emitting radio-frequency signals.
Cannot establish a
Bluetooth connection.
This unit is not registered on the other
component’s Bluetooth connection list.
Perform pairing operations again ( P. 10).
No sound is produced or
the sound is interrupted
during playback.
The Bluetooth connection of this unit with
the other component is disconnected.
Perform Bluetooth connection operations
again ( P. 12).
This unit and the other component are too
far apart.
Move the other component closer to this unit.
There is a device (microwave oven,
wireless LAN, etc.) that outputs signals in
the 2.4 GHz frequency band nearby.
Move this unit away from the device that is
emitting radio-frequency signals.
The other component’s Bluetooth
function is off.
Turn on the Bluetooth function of the other
component.
The other component is not set to send
Bluetooth audio signals to this unit.
Check that the Bluetooth function of the other
component is set properly.
The pairing setting of the other
component is not set to this unit.
Set the pairing setting of the other component
to this unit.
The other component’s volume is set to
the minimum.
Increase the volume level.
USB port charging
Problem Cause Solution
Cannot charge the
connected portable USB
device.
An incompatible USB device is connected
to the unit. Or the USB device is not
connected to this unit properly.
Turn off the system and reconnect the USB
device to the unit. If it does not resolve the
problem, the USB device is not chargeable
with the unit.
15 En
En
PLAYER SECTION
AUX IN
Input connector
............STEREO L/R: 3.5 mm (1/8 in) STEREO mini Jack
AMPLIFIER SECTION
Maximum output power..........................4 W + 4 W + 8 W
(6 Ω 1 kHz, 10% THD)
Driver unit ...................4 cm (1 5/8 in) full-range driver × 2
5.5 cm (2 1/8 in) woofer + SR-Bass × 1
Bluetooth SECTION
Bluetooth version...........................................Ver. 2.1+EDR
Supported protocols.....................................A2DP, AVRCP
Supported codecs................................................SBC, AAC
Wireless output.........................................B luetooth Class 2
Maximum communication distance
...................................... 10 m (33 ft) (without obstructions)
Supported contents protection .................. SCMS-T method
TUNER SECTION
Tuning range
Southeast Asia and Taiwan models:
FM....................................................87.5 to 108.0 MHz
U.S.A. and Canada models:
FM....................................................87.5 to 107.9 MHz
AM ...................................................... 530 to 1710 kHz
CHARGING CONNECTOR SECTION
Connector type..................................................USB type A
Output rating.........................................................5 V/2.1 A
NFC (Near Field Communication)
SECTION
Supported model
.............................NFC-ready Android device Ver. 4.1, 4.2
* Some models may not work or be different in the required
distance for connection.
GENERAL
Power Supply........................................... AC 120 V, 60 Hz
Power consumption .....................................................22 W
System off consumption .............................................1.9 W
Standby consumption...................................... 0.5 W or less
Dimensions (W × H × D)....................210 × 110 × 144 mm
(8 1/4 × 4 3/8 × 5 5/8 in)
Weight......................................................... 1.4 kg (3.1 lbs.)
Specifications are subject to change without notice.
Bluetooth
Bluetooth is a technology for wireless communication
between devices within an area of about 10 meters (33 ft)
employing the 2.4 GHz frequency band, a band which can
be used without a license.
Bluetooth is a registered trademark of the Bluetooth SIG
and is used by Yamaha in accordance with a license
agreement.
Handling Bluetooth communications
The 2.4 GHz band used by Bluetooth compatible devices
is a radio band shared by many types of equipment. While
Bluetooth compatible devices use a technology
minimizing the influence of other components using the
same radio band, such influence may reduce the speed or
distance of communications and in some cases interrupt
communications.
The speed of signal transfer and the distance at which
communication is possible differs according to the
distance between the communicating devices, the
presence of obstacles, radio wave conditions and the type
of equipment.
Yamaha does not guarantee all wireless connections
between this unit and devices compatible with Bluetooth
function.
SPECIFICATIONS
i Fr
1 Lire ces instructions.
2 Conserver ces instructions.
3 Tenir compte de tous les avertissements.
4 Suivre toutes les instructions.
5 Ne pas utiliser cet appareil à proximité de l’eau.
6 Nettoyer cet appareil avec un chiffon sec seulement.
7 Ne pas recouvrir les ailettes de ventilation. Installer
l’appareil selon les instructions du fabricant.
8 Ne pas installer près d’une source de chaleur, comme un
appareil de chauffage, une résistance électrique, un
poêle, ou tout autre appareil (amplificateurs compris)
produisant de la chaleur.
9 Ne pas désamorcer le système de sécurité d’une fiche
polarisée ou d’une fiche avec mise à la terre. Une fiche
polarisée est munie de deux lames, dont l’une est plus
large que l’autre. Une fiche avec mise à la terre est munie
de deux lames et d’une broche de terre. La lame la plus
large ou la troisième broche sont reliées à la terre pour
des raisons de sécurité. Si la fiche fournie ne s’insère pas
dans la prise, s’adresser à un électricien pour faire
remplacer la prise obsolète.
10 Protéger le cordon d’alimentation de sorte qu’il ne risque
pas d’être piétiné ou coincé, surtout au niveau des fiches,
des prises et de sa sortie de l’appareil.
11 Utiliser seulement les fixations et accessoires spécifiés
par le fabricant.
12 Utiliser seulement le chariot, socle,
trépied, support ou meuble spécifié par le
fabricant ou vendu avec l’appareil. Si un
chariot est utilisé, faire attention de ne pas
se blesser ou de le renverser pendant le
transport de l’appareil.
13 Débrancher cet appareil pendant les orages électriques,
ou s’il ne doit pas être utilisé pendant un certain temps.
14 Pour toute inspection s’adresser à un personnel qualifié.
Une inspection est nécessaire en cas de dommage, quel
qu’il soit, par exemple cordon d’alimentation ou fiche
endommagé, liquide répandu ou objet tombé à l’intérieur
de l’appareil, exposition de l’appareil à la pluie ou à
l’humidité, fonctionnement anormal ou chute de
l’appareil.
Yamaha et le Groupe des Entreprises Électroniques Grand Public de l’Association des Industries Électroniques
vous demandent de tirer le meilleur parti de votre équipement tout en écoutant à un niveau non dommageable
pour l’ouïe, c’est-à-dire un niveau où vous pouvez obtenir un son fort et clair, sans hurlement ni distorsion, mais
sans aucun danger pour l’ouïe. Comme les sons trop forts causent des lésions auditives qui ne peuvent être
détectées qu’à long terme, lorsqu’il est trop tard, Yamaha et le Groupe des Entreprises Électroniques Grand
Public de l’Association des Industries Électroniques vous déconseillent l’écoute prolongée à des volumes
excessifs.
PRÉCAUTIONS CONCERNANT LA SÉCURITÉ
CAUTION
RISK OF ELECTRIC SHOCK DO
NOT OPEN
ATTENTION : POUR RÉDUIRE LES RISQUES
D’INCENDIE ET DE DÉCHARGE
ELECTRIQUE, NE PAS RETIRER LE
COUVERCLE (OU LE PANNEAU ARRIÈRE).
AUCUNE PIÈCE INTERNE NE PEUT ÊTRE
CHANGÉE PAR L’UTILISATEUR. POUR
L’ENTRETIEN, S’ADRESSER À UN
PERSONNEL QUALIFIÉ.
Explication des symboles
L’éclair avec une flèche à l’intérieur d’un
triangle équilatéral est destiné à attirer
l’attention de l’utilisateur sur la présence
d’une « tension dangereuse » non isolée à
l’intérieur du produit, pouvant être
suffisamment élevée pour constituer un
risque d’électrocution.
Le point d’exclamation à l’intérieur d’un
triangle équilatéral est destiné à attirer
l’attention de l’utilisateur sur la présence
d’instructions importantes sur l’emploi ou de
la maintenance (réparation) de l’appareil dans
la documentation fournie.
IMPORTANT
Veuillez enregistrer le numéro de série de cet appareil dans
l’espace réservé à cet effet, ci-dessous.
MODÈLE :
No. de série :
Le numéro de série se trouve à l’arrière de l’appareil. Prière
de conserver le mode d’emploi en lieu sûr pour toute
référence future.
Nous vous souhaitons un plaisir musical durable
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56

Yamaha TSX-B72 Bruksanvisning

Kategori
Väckarklockor
Typ
Bruksanvisning