11
upwards.
Note:
with cold water up to the maxi-
mum number of cups (marked
"max").
•
water up to the "max" level shown
on the water level indicator (5).
• Close the water tank lid.
• Switch the appliance on using
the power switch (6). The light on
the switch lights up red.
CAUTION – risk of scalding:
–
steam outlet (2) presents a
scalding hazard. The outlet
must not be covered. Never
the water tank lid while the
appliance is operating.
– Never put water into the
appliance if it is still operat-
ing or is still hot.
•
the brewing process is complete.
The power switch then goes back
to its initial position.
• Empty the thermal jug.
• Repeat the steps using fresh
water.
MAKING COFFEE
• Plug the power cord (12) into
the socket.
Note:
longer if you follow the instruc-
tions below:
–
out the thermal jug (9) with hot
water.
–Remove the thermal jug from
brewing process is complete.
• Place the thermal jug on the
centre of the base. Ensure that
the arrow (7) is pointing to "Make
•
clean water.
upwards.
Note:
with cold water up to the maxi-
mum number of cups (marked
"max").
•
the desired number of cups. The
water level indicator (5) indicates
the number of cups that can be
made.
• Close the water tank lid.
out of the appliance until it locks
into position.
•
the crimped edges so that it
protruding.
•
cups you want to make in the
•
appliance.
• Switch the appliance on using
the power switch (6). The light on
the switch lights up red.
CAUTION – risk of scalding:
–
steam outlet (2) presents a
scalding hazard. The outlet
must not be covered. Never
the water tank lid while the
appliance is operating.
– Never put water into the
appliance if it is still operat-
ing or is still hot.
•
the brewing process is complete.
The power switch then goes back
to its initial position.
• Remove the thermal jug when
complete.
• Twist the thermal jug lid (8) into
Note:
Do not set the thermal jug down
because it is not completely
leak-proof.
out of the appliance until it locks
into position.
sliding the lever to the right.
other biodegradable waste.
•
the appliance.
• To secure it, slide the lever to
the left until it locks into place.
CLEANING
-
larly to avoid lime-scale build-up.
performance of your appliance.
Note:
–The appliance's components
are not suitable for washing in
the dishwasher.
–Never immerse the thermal
jug (9) in water or any other
space between the thermal
jug's walls.
• If necessary, clean the thermal
jug and the thermal jug lid (8) with
a little detergent and a soft brush.
• Wipe down the outer parts of
cloth.
•
it under running water.
Occasional cleaning
• In case of heavy soiling, place
a dishwasher tablet in the thermal
jug and add hot water.
• Leave the mixture for several
hours (e.g. overnight) to take
English