MSA Gallet F1 XF Bruksanvisningar

Operating Manual

Gallet F1 XF

£

Helmet for Firefighters

Order No.: CH18045_PQ7300/03

GB 3 - 16

FR 17 - 30

DE 31 - 44

BR 45 - 58

DK 59 - 72

ES 73 - 86

FI 87 - 100

GR 101 - 114

IT 115 - 128

NL 129 - 142

NO 143 - 156

SE 157 - 170

©

9LD 2UVHUDE75,(67(,7$/<

7HO 

ZZZIDVLWLW  LQIR#IDVLWLW

For other languages see chapter 6 of the respective manual.

1

2

3

4

5

7

8

11

12

13

14

15

16

18

17

9

10

19

20

21

6

23

22

No Part Part. No

1a Aluminized neck curtain F1 XF, 3 layers GA1116F

1b Nomex neck curtain F1 XF GA1116C

1c Wool/Nomex neck curtain F1 XF GA1116D

2a Integral Wool/Nomex neck curtain F1 XF (Size Medium/Large) GA1116B-M GA1116B-L

2b Integral aramid neck curtain F1 XF GA1116E-M GA1116E-L

3 Lighting module F1 XF GA1484

4 Torch lamp support F1 XF (D: right/G: left) GA1485D GA1485G

5a Lamp XPS GA1488

5b Lamp XP LED GA1464

5c Lamp XS zone 0 GA1466

5d Lamp AS-R GA1481

6 Ocular visor kit F1 XF, EN14458 GA1087A

7a Face shield F1 XF, EN14458, clear GA1086A

7b Face shield F1 XF, EN14458, metalized GA1086B

8 Shell F1 XF, Painted,

(Size M: Medium/L: Large)

GA1090-xxM GA1090-xxL

9 Kitfix F1 XF GA1092A

10a Kitfix F1 XF mobile GA1092B

10b Kitfix F1XF mobile, PN GA1092C

11 Suspension F1 XF, EN443,

(Size M: Medium/L: Large)

GA1094-M GA1094-L

12 Impact liner F1 XF, EN443,

(Size M: Medium/L: Large)

GA1095-M GA1095-L

13 Ratchet cradle F1 XF GA1098A

14a Chinstrap F1 XF, textile GA1128A

14b Chinstrap F1 XF, leather GA1128B

15a Textile paddings, F1 XF GA1129A

15b Leather paddings, F1 XF GA1129B

16 Retroreflective stickers F1 XF

(Size M: Medium/L: Large)

GA1136-xxM GA1136-xxL

17 Front plate F1 XF GA1150-xx

18 Protective bag for helmet GA1382

19a Headset Bone Conductive Microphone F1 XF GA010002A3X

19b Headset Bone Conductive Microphone F1 XF 2ls GA010002A3AX

20a Headset Boom Microphone F1 XF 1ls GA010002B3X

20b Headset Boom Microphone F1 XF 2ls GA010002B3AX

21a Hearing F1 XF Protect.Bone Conduct.Micro. GA010002C3X

21b Hearing Protection Boom Microphone F1xf GA010002D3X

21c Hearing Protection F1 XF GA010002E3X

22 Set of 10 headset interfaces for F1 XF GA1131

23 OSTEO interface for F1 XF GA010007062

)$6,76UO

9LD2UVHUDE

75,(67(,7$/<7HOZZZIDVLWLWLQIR#IDVLWLW

3

Safety Regulations

GB

1 Safety Regulations

1.1 Correct Use

The F1 XF helmet - hereafter called helmet - is a safety helmet for the head intended for firefighters

operations, such as fire fighting in buildings and other structures, rescue interventions and other typical

tasks of fire brigades.

The helmet is designed for use with SCBA full face masks.

WARNING!

The safety intended to be provided by the helmet can only be ensured when it is properly assembled

and correctly fitted, removable parts shall not be worn separately.

WARNING!

This helmet is not suitable as a motorcycle helmet.

It is imperative that this operating manual be read and observed when using the product. In particular,

the safety instructions, as well as the information for the use and operation of the product, must be

carefully read and observed. Furthermore, the national regulations applicable in the user's country

must be taken into account for safe use.

Alternative use, or use outside this specification will be considered as non-compliance. This also

applies especially to unauthorised alterations to the product and to commissioning work that has not

been carried out by MSA or authorised persons.

1.2 Liability Information

MSA accepts no liability in cases where the product has been used inappropriately or not as intended.

The selection and use of the product are the exclusive responsibility of the individual operator.

Product liability claims, warranties also as guarantees made by MSA with respect to the product are

voided, if it is not used, serviced or maintained in accordance with the instructions in this manual.

DANGER!

Before use the product operability must be verified. The product must not be used if the function test

is unsuccessful, it is damaged, a competent servicing/maintenance has not been made, genuine MSA

spare parts have not been used.

2 Description

The helmet provides protection of head and face against shocks, sharp objects, splatters of solid,

liquid, corrosive, chemical products (sulphuric acid, sodium hydroxide, p-xylene, butan-1-ol,

n-heptane…), molten metals, radiating heat, flames, electric current.

In situations where the conditions exceed those described in the specifications mentioned above, the

protection of the user is not guaranteed.

Face Shield

The clear or gold coated face shield protects against various risks likely to arise during firefighting inter-

ventions, ambulance and emergency services, except respiratory and smoke and gas / vapour emis-

sion risks. The face shield resists the splatter of chemical products identical to those of the helmet

mentioned above.

)$6,76UO- Via Orsera 13/b - 34145 TRIESTE - ITALY - Tel +39 040 825604 - www.fasit.it - [email protected]

4

Description

GB

2.1 Overview

The helmet consists of the following components:

2.2 Technical Data

1

2

5

4

6

3

8

7

1 Shell 5 Kitfix mask adaptor

2 Front plate 6 Inner ring with headband assembly

3 Face shield 7 Impact liner

4 Ocular visor 8 Chin strap

Helmet sizes

• Medium (M) for head sizes from 52 cm to 62 cm

(20.5 inches to 24.4 inches)

• Large (L) for head sizes from 57 cm to 65 cm

(22.4 inches to 25.6 inches)

Weight

(Helmet with face

shield, no options)

• M: 1450 ± 30 g

• L: 1580 ± 30 g

Weight changes when options are fitted on the helmet. Check manuals for

options for their exact weights.

Options

• Neck curtain (4 types)

• Integrated lighting module

• Lamp bracket to fit a helmet mounted flashlight

• Ocular visor

• Communication headset

• Hearing protection with or without communication

Detailed information regarding the lighting module and the communication

headset can be found in the separate user manual for these devices.

Warranty

•Helmet

• Options

2 years, parts and labour from the date of purchase

Legal warranty

For defects and hidden defects according to the conditions stipulated in arti-

cles 1641 and pursuant to the Civil Code (in France).

Different national regulations may apply.

)$6,76UO- Via Orsera 13/b - 34145 TRIESTE - ITALY - Tel +39 040 825604 - www.fasit.it - [email protected]

5

Description

GB

2.3 Certifications/Approvals/Technical Specifications

The helmet meets the 89/686/EEC directive and is certified according to EN 443:2008. Depending on

the individual helmet configuration, optional EN 443:2008 requirements may be marked on the helmet,

as explained below:

Standards and Directives for Helmet

Standards and Directives for Visors

Certification

agency

Helmet

INSPEC Ltd (0194), 56 Leslie Hough Way, Salford,

Greater Manchester, M6 6AJ, United Kingdom

Standards and

directives:

89/686/EEC Personal protection equipment

EN 443:2008 “Helmets for firefighting in buildings and other structures”.

Type B Indicates the protection zone assured by the helmet (area 1a -1b).

Type B3b Indicates the extended protection zone assured by the helmet (area 1a-1b and 3b)

E2 Indicates the electrical insulation of the damp helmet.

E3 Indicates a non-conductive surface of the shell.

*** / ** Indicates protection at low temperature down to -30°C/ -20°C

C

Indicates a resistance to liquid chemical products. (sulphuric acid, sodium

hydroxide,

p-xylene, butan-1-ol, n-heptane)

Marking

(Wheelmark):

Meets 96/98/EC Marine Equipment Directive (MED)

Certification

agency

Face shield:

INSPEC Ltd (0194), 56 Leslie Hough Way, Salford,

Greater Manchester, M6 6AJ, United Kingdom

Ocular visor

DEKRA EXAM (0158), Dinnendahlstr. 9,

D-44809 Bochum

Standards and

directives:

89/686/EEC Personal protection equipment

EN 14458:2004 Personal eye equipment

(+) Conforms to the additional requirements of firefighters

Visor type: Eye guard

Visor type: Face guard

-30 °C; 120 °C Extremes of temperature to which the visor has been tested (-30 °C & +120 °C)

ȍ Complies with the electrical properties

A Resistance to high energy impact 190 ms-1

T Resistance to medium energy impact at extremes of temperatures

AT Resistance to high energy impact (190ms-1) at extremes of temperature

K Resistance to abrasion according EN 168: 2001, clause 15

N Resistance to fogging

2C-2.5 and 2C-1.2 UV Filtering according to EN170:2002

)$6,76UO- Via Orsera 13/b - 34145 TRIESTE - ITALY - Tel +39 040 825604 - www.fasit.it - [email protected]

6

Adjusting the Helmet

GB

The protection against radiating heat ensured by the face shields varies with the temperature of the

heat source, see figure above. It is recommended to only use the face shield when the face shield can

reduce the heat exposure to the wearer's eyes to less than 100W/m2.

WARNING!

When fitted with another item of personal protective equipment or with an accessory, (other than as

supplied by the helmet manufacturer for use with this helmet) a helmet marked as complying with

EN 443 might no longer satisfy all clauses of the standard. Refer to information supplied by the helmet

manufacturer.

3 Adjusting the Helmet

3.1 Before Donning

% Transmission

Radiant heat protection

%

Source Temperature (K)

35

40

45

50

55

60

65

70

75

1600 1800 2000 2200 2400 2450 2600 2800 3000 3200

GA1086A

GA1086B

(1) Choose helmet size M or L (see Technical

Data) according to your head size.

(2) Adjust front headband by sliding it up or

down.

(3) Position front headband inside the helmet to

avoid contact between headband and mask.

(4) Adjust rear headband by rotating to optimise

fit on back of the head.

)$6,76UO- Via Orsera 13/b - 34145 TRIESTE - ITALY - Tel +39 040 825604 - www.fasit.it - [email protected]

7

Adjusting the Helmet

GB

3.2 Donning

The following adjustments have to be carried out when the helmet is donned.

The chin strap is equipped with 3 adjustment points to allow quick and simple adjustment while the

helmet is on the head.

(5) Adjust wearing height with the Velcro

fasteners on the two rear suspension straps.

(1) Position the chin strap as shown before

donning the helmet.

(2) Adjust head size:

Turn knob clockwise to tighten the

ratchet headband.

Turn knob anticlockwise to loosen the

ratchet headband.

(3) Check that the helmet is correctly adjusted:

The helmet should not fall off when the

head is leaning forward and the chin

strap is unfastened.

(1) Maximally loosen the 3 adjustment points.

(2) Place helmet on head. Make sure that it is well positioned.

(3) Close the buckle of the chin strap.

(4) Tighten the chin strap.

(5) Tighten the two rear adjustment straps until a tight but still

comfortable fit is achieved.

The wearing angle shown here is indicative.

It may vary slightly depending on user's head size and shape.

)$6,76UO- Via Orsera 13/b - 34145 TRIESTE - ITALY - Tel +39 040 825604 - www.fasit.it - [email protected]

8

Adjusting the Helmet

GB

WARNING!

The helmet only meets the retention requirements of EN 443:2008 when the chin strap provided by the

helmet manufacturer is worn and adjusted according to the instructions.

3.3 Visors

WARNING!

X Visors worn over non-designated corrective frames may transmit impacts which may damage the

corrective eyewear thus creating a hazard to the user.

X Service life of visors is depending on the conditions of use.

X Any face shield that has been scratched, dropped or damaged must be replaced.

X The visor type "Face guard" will provide protection to the eyes and substantial areas of the face.

X Performances of the visor are obtained only in use position (low position). Visors should be in

standby position (stored under the helmet shell) during the use of a breathing apparatus (SCBA).

X Equipment not marked with "T" should only be used at non-extreme ambient temperatures.

X Ensure that you are using an EN443 helmet with a visor marked "+" for structural firefighting.

X Materials that come in contact with the wearer's skin could cause allergic reactions in susceptible

individuals.

The ocular visor can be adjusted to optimize the distance between visor and face.

Face Shield

(1) Position by pulling it completely up or down.

Ocular Visor (optional)

(1) Position by pulling it up or down.

(2) Tilt the ocular visor towards the face for an optimal fit.

)$6,76UO- Via Orsera 13/b - 34145 TRIESTE - ITALY - Tel +39 040 825604 - www.fasit.it - [email protected]

9

Attaching the Accessories

GB

(1) Don helmet and pull down ocular visor.

4 Attaching the Accessories

4.1 Neck Curtains

2 types of neck curtain can be installed:

• Neck curtain for rear protection

• Integral neck curtain

(2) Unclip and clip the yellow stopper in positions (A),

(B) or (C) to optimize fit of the ocular visor on the

face.

The helmet has 8 slots for installing the neck

curtain:

• 4 at the rear for the rear neck curtain

(A, B, C, D).

• 4 more at the front for the integral neck curtain

(E, F, G, H)

(1) Place the neck curtain upside down above

the helmet.

(2) Insert the 2 clips marked n in the central

slots.

(3) Push the 2 pressure clips o till locking.

For the integral neck curtain, repeat the operation

for the 4 front attachment points.

)$6,76UO- Via Orsera 13/b - 34145 TRIESTE - ITALY - Tel +39 040 825604 - www.fasit.it - [email protected]

10

Attaching the Accessories

GB

4.2 Ocular Visor

4.3 Lighting Module

(1) Place the ocular visor upside down above

the helmet.

(2) Insert the 2 clips simultaneously into the

dedicated slots.

(3) Lock the ocular visor module by fixing it on

the shell plot (right and left).

(1) Place the helmet upside down with the face

shield towards you.

(2) Insert the left box (L) of the F1 XF Lightning

module into the space provided on the left

side of the helmet and clip into place.

(3) Follow the same procedure for the right box

(R).

When the lighting module and F1 XF boom microphone are both installed inside the helmet, always

disassemble the lightning module first, then the boom microphone.

)$6,76UO- Via Orsera 13/b - 34145 TRIESTE - ITALY - Tel +39 040 825604 - www.fasit.it - [email protected]

11

Attaching the Accessories

GB

See the Lighting module user instruction delivered with the product for details on operation.

4.4 Lamp Bracket and Lamp

(4) Ensure that the cable is placed in the indi-

cated area.

CLIC

(1) Slide the lamp bracket along the shell shape.

(2) Insert the lamp into the lamp bracket from

the rear open side (A).

(3) Rotate, then press forward to secure the

attachment (B).

(4) Tilt the lamp up and down into the required

position.

(5) To remove the lamp, slightly press it towards

the helmet while sliding it to the rear open

side (A) of the lamp bracket.

)$6,76UO- Via Orsera 13/b - 34145 TRIESTE - ITALY - Tel +39 040 825604 - www.fasit.it - [email protected]

12

Maintenance and Cleaning

GB

4.5 Mask Adapter (Kitfix)

Attach a mask using the "Kitfix" connector kits A.

5 Maintenance and Cleaning

The length of the useable life of this helmet will be affected by the type(s) of material used in its

construction and the environments in which the helmet is used and stored. Recommendations on this

topic should be sought from the manufacturer.

WARNING!

Do not apply paint, stickers, cleaning products with a hydrocarbon base or solvents to the helmet or

visors to prevent damaging the materials of your helmet.

To maximize helmet lifetime:

• Store the helmet in a proper storage bag and/or in a closed cabinet to avoid extended exposure

to cold, humidity, exhaust fumes, etc.

• Clean the helmet (shell and internal components) after use before storing.

Checks After Each Use

After each use, check every part of the helmet and especially all the fixing points:

• Correct anchor points used

• No evident wear

• No fractures or cracks

Check that the helmet fit is always correct.

To adjust mask tightness on helmet:

(1) Use a pair of pliers to remove the pin.

(2) Adjust the Kitfix to position (1) (2) or (3) (according to desired

mask tightness).

(3) Use the pin to lock the Kitfix in place (push it in completely).

(4) Test mask seal after attaching the mask if necessary.

Do not drop the helmet.

Prevent the helmet from impacts which could damage the shields (cracks/scratches).

The parts in contact with skin have to be inspected regularly for cracks or wear that could

cause discomfort. Changing those parts regularly will maintain user comfort level.

)$6,76UO- Via Orsera 13/b - 34145 TRIESTE - ITALY - Tel +39 040 825604 - www.fasit.it - [email protected]

13

Maintenance and Cleaning

GB

Maintenance by a Trained Maintenance Specialist

Only trained people should perform the regular maintenance.

WARNING!

Replace any damaged parts only with original MSA parts, as only these original parts are authorized

and ensure the performance of the helmet.

Helmet absorbs the energy of a blow by partial destruction of, or damage to, the helmet. Even though

such damage may not be readily apparent, any helmet subjected to a severe impact should be

replaced.

Periodically, perform a complete check of the helmet with detailed inspection of each critical compo-

nent. MSA provides upon request a Service and Maintenance manual which details conformity criteria

for all safety components of the helmet and parts replacement procedures.

MSA recommends that this complete control is performed at least every two (2) years, more regularly

in case of intensive use (every year for instance), or each time the helmet has been exposed to very

severe conditions (mechanical impact, very high temperature, direct flame contact, contact with

pouring metal or chemicals). In cases where frequency of use is very low and none of the mentioned

exposures and damages are recorded, an inspection should be performed at least every 4 years. Local

regulations may apply.

WARNING!

In case of visible damage identified during the daily check (before or after use), such as impacts, signif-

icant scratches, coating removal on the shell or visors, melted parts, broken parts, torn straps or

paddings, missing components, non-operational moving parts (such as visors or ratchet), etc., the

helmet should be taken to the trained maintenance technician or an MSA approved maintenance

center for complete control processing.

WARNING!

Components that are particularly critical to the safety of the product, such as suspension, shell and

impact liner, are marked with .

Treat such parts with special attention and care during inspection and assembly.

5.1 Cleaning and Disinfection

Plastic Components

• Use soapy water and a soft cloth. (Do not use detergent, solvent based products or abrasive

materials).

Face Shield and Ocular Visor

• Use soapy water and a soft cloth. (Do not use detergent, solvent based products or abrasive

materials).

Chin Strap and Headband Liner

(1) Remove the textile or leather components (fastened with Velcro).

(2) Clean it as follows:

a) Textile chin strap + textile headband liner: 30°C with a mild detergent.

b) Leather chin strap + leather headband liner: Use soapy water and a lint-free soft cloth.

)$6,76UO- Via Orsera 13/b - 34145 TRIESTE - ITALY - Tel +39 040 825604 - www.fasit.it - [email protected]

14

Maintenance and Cleaning

GB

Chin Strap Disassembly before Cleaning

Chin Strap Assembly after Cleaning

(1) Unlock metallic trapezoid (chin strap 3rd

point) from the hook by pushing it.

(2) Rotate the clips on right and left side of the

chin strap 90 degrees towards the rear of the

helmet.

(3) Push each clip forward and raise it on the

back.

(1) Insert both clips into the slots vertically.

(2) Rotate clips 90 degrees towards the rear and

push them in.

(3) Rotate the clips 90 degrees forward into the

wearing position.

)$6,76UO- Via Orsera 13/b - 34145 TRIESTE - ITALY - Tel +39 040 825604 - www.fasit.it - [email protected]

15

Maintenance and Cleaning

GB

Cleaning the Neck Curtains

5.2 Transport

Helmet with Visor(s)

Store the visor(s) inside the helmet (out of use position), store the helmet in a MSA Gallet protective

bag (GA1382).

Visor as Spare Part

The visors have to be kept in their plastic bags until they are mounted on the helmet.

5.3 Discard

The helmet must be treated as ordinary industrial waste/non-hazardous waste according to local regu-

lations. For further information contact MSA.

Attachment of the 3rd point (at the back)

(4) Insert the metallic trapezoid and lock it in the

hook by pulling it vertically.

Neck curtains made of Nomex, wool:

• Cleaning at 30°C with a gentle detergent

Aluminized neck curtain:

• Cleaning at 30°C with water, using a sponge.

Integral Aramid neck curtain:

• Cleaning at 60°C with a gentle detergent.

)$6,76UO- Via Orsera 13/b - 34145 TRIESTE - ITALY - Tel +39 040 825604 - www.fasit.it - [email protected]

16

Spare Parts, Accessories and Options

GB

6 Spare Parts, Accessories and Options

No Part Part. No

1a Aluminized neck curtain F1 XF, 3 layers GA1116F

1b Nomex neck curtain F1 XF GA1116C

1c Wool/Nomex neck curtain F1 XF GA1116D

2a Integral Wool/Nomex neck curtain F1 XF (Size Medium/Large) GA1116B-M GA1116B-L

2b Integral aramid neck curtain F1 XF GA1116E-M GA1116E-L

3 Lighting module F1 XF GA1484

4 Torch lamp support F1 XF (D: right/G: left) GA1485D GA1485G

5a Lamp XPS GA1488

5b Lamp XP LED GA1464

5c Lamp XS zone 0 GA1466

5d Lamp AS-R GA1481

6 Ocular visor kit F1 XF, EN14458 GA1087A

7a Face shield F1 XF, EN14458, clear GA1086A

7b Face shield F1 XF, EN14458, metalized GA1086B

8

Shell F1 XF, Painted,

(Size M: Medium/L: Large)

GA1090-xxM GA1090-xxL

9 Kitfix F1 XF GA1092A

10a Kitfix F1 XF mobile GA1092B

10b Kitfix F1XF mobile, PN GA1092C

11

Suspension F1 XF, EN443,

(Size M: Medium/L: Large)

GA1094-M GA1094-L

12

Impact liner F1 XF, EN443,

(Size M: Medium/L: Large)

GA1095-M GA1095-L

13 Ratchet cradle F1 XF GA1098A

14a Chinstrap F1 XF, textile GA1128A

14b Chinstrap F1 XF, leather GA1128B

15a Textile paddings, F1 XF GA1129A

15b Leather paddings, F1 XF GA1129B

16 Retroreflective stickers F1 XF (Size M: Medium/L: Large) GA1136-xxM GA1136-xxL

17 Front plate F1 XF GA1150-xx

18 Protective bag for helmet GA1382

19a Headset Bone Conductive Microphone F1 XF GA010002A3X

19b Headset Bone Conductive Microphone F1 XF 2ls GA010002A3AX

20a Headset Boom Microphone F1 XF 1ls GA010002B3X

20b Headset Boom Microphone F1 XF 2ls GA010002B3AX

21a Hearing F1 XF Protect.Bone Conduct.Micro. GA010002C3X

21b Hearing Protection Boom Microphone F1xf GA010002D3X

21c Hearing Protection F1 XF GA010002E3X

22 Set of 10 headset interfaces for F1 XF GA1131

23 OSTEO interface for F1 XF GA010007062

For illustrations of parts see fold-out page.

)$6,76UO- Via Orsera 13/b - 34145 TRIESTE - ITALY - Tel +39 040 825604 - www.fasit.it - [email protected]

3

Consignes de Sécurité

FR

1 Consignes de Sécurité

1.1 Utilisation correcte

Le casque F1 XF - ci-après appelé casque - est un casque de protection de la tête destiné aux inter-

ventions des pompiers, comme la lutte contre les incendies dans les bâtiments et autres structures,

les opérations de sauvetage et les autres activités typiques pour les pompiers.

Le casque est conçu pour être utilisé avec des masques complets ARI.

AVERTISSEMENT!

La protection que le casque est censé apporter peut uniquement être assurée lorsqu’il est assemblé

et fixé correctement, les parties amovibles ne doivent pas être portées séparément.

AVERTISSEMENT!

Ce casque ne peut pas être utilisé comme casque de moto.

Il est impératif de lire et d'appliquer ce manuel d'utilisation avant d'utiliser le produit. En particulier, les

consignes de sécurité ainsi que les informations concernant l'utilisation et le fonctionnement du produit

doivent être soigneusement lues et respectées. Par ailleurs, les réglementations nationales appli-

cables dans le pays de l'utilisateur doivent être prises en compte pour une utilisation sans risque.

Toute utilisation alternative ou non décrite dans ces caractéristiques sera considérée comme un non-

respect des consignes. Ceci s'applique particulièrement aux modifications non autorisées effectuées sur

le produit et à une mise en service qui n'aurait pas été réalisée par MSA ou par des personnes agréées.

1.2 Informations concernant la responsabilité

MSA se dégage de toute responsabilité en cas de problème causé par une mauvaise utilisation du

produit ou pour un usage non prévu dans ce manuel. Le choix et l'utilisation du produit sont placés

sous l'entière responsabilité de l'opérateur individuel.

Les réclamations portant sur la responsabilité du fait des produits et sur les garanties apportées par

MSA concernant ce produit sont nulles et non avenues s'il n'est pas utilisé, entretenu ou maintenu

conformément aux instructions contenues dans ce manuel.

DANGER!

Avant son utilisation, il est impératif de s'assurer du bon fonctionnement du produit. Le produit ne peut

en aucun cas être utilisé si le test de fonctionnement n’a pas été satisfaisant, si des dommages sont

constatés, si une opération de réparation ou de maintenance aurait dû être réalisée par un technicien

compétent ou si des pièces différentes des pièces de rechange originales de MSA ont été utilisées.

2 Description

Le casque assure une protection de la tête et du visage contre les chocs, les objets tranchants, les

projections de produits solides, liquides, corrosifs, chimiques (acide sulfurique, hydroxyde de sodium,

p-xylène, butan-1-ol, n-heptane…), les métaux en fusion, la chaleur rayonnante, les flammes, le

courant électrique.

Dans les situations où les conditions dépassent celles prévues au cahier des charges mentionné ci

dessus, la protection de l’utilisateur ne sera plus assurée.

Écran facial

L'écran facial transparent ou doré protège contre les divers risques susceptibles de survenir au cours

des interventions de lutte contre l'incendie, des services d'ambulance et d'urgence, à l'exception des

risques d'ordre respiratoire et liés à l'émission de fumée et de gaz/vapeur. L'écran facial résiste à la

projection des produits chimiques identiques à ceux du casque cités ci-dessus.

)$6,76UO- Via Orsera 13/b - 34145 TRIESTE - ITALY - Tel +39 040 825604 - www.fasit.it - [email protected]

4

Description

FR

2.1 Vue d'ensemble

Le casque comprend les composants suivants :

2.2 Caractéristiques techniques

1

2

5

4

6

3

8

7

1 Calotte 5 Adaptateur de masque Kitfix

2 Plaque attribut 6 Ensemble de l'anneau intérieur avec bandeau

3 Écran facial 7 Calotin

4 Écran oculaire 8 Jugulaire

Tailles de casque

• Moyenne (M) pour tours de tête de 52 cm à 62 cm

(20,5 pouces à 24,4 pouces)

• Grande (L) pour tours de tête de 57 cm à 65 cm

(22,4 pouces à 25,6 pouces)

Poids

(casque avec écran

facial, sans options)

• M : 1450 ± 30 g

• L : 1580 ± 30 g

Le poids change si des options sont fixées sur le casque. Consultez les

manuels des options pour les poids exacts.

Options

• Bavolet (4 types)

• Module d’éclairage intégré

• Support de lampe pour fixer une lampe externe montée sur casque

• Écran oculaire

• Micro-casque de communication

• Protection auditive avec ou sans communication

Des informations détaillées au sujet du module d’éclairage et du micro-

casque de communication figurent dans le manuel d’utilisation séparé de

ces dispositifs.

Garantie

• Casque

• Options

2 ans, pièces et main-d’œuvre à compter de la date d’achat

Garantie légale

Pour défauts et vices cachés dans les conditions prévues aux articles 1641

et suivants du Code Civil (en France).

Différentes réglementations nationales peuvent être applicables.

)$6,76UO- Via Orsera 13/b - 34145 TRIESTE - ITALY - Tel +39 040 825604 - www.fasit.it - [email protected]

5

Description

FR

2.3 Certifications/homologations/caractéristiques techniques

Le casque répond à la directive 89/686/CEE et est certifié selon la norme EN 443:2008. En fonction

de la configuration individuelle du casque, des exigences EN 443:2008 optionnelles peuvent être

marquées sur le casque, conformément aux explications suivantes :

Normes et directives pour le casque

Normes et directives pour écrans

Organisme de

certification

Casque

INSPEC Ltd (0194), 56 Leslie Hough Way, Salford,

Greater Manchester, M6 6AJ, Royaume-Uni

Normes et

directives :

89/686/CEE Équipement de protection individuelle

EN 443:2008

« Casques pour la lutte contre les incendies dans les bâtiments

et autres structures ».

Type B Indique la zone de protection assurée par le casque (zone 1a-1b).

Type B3b Indique la zone de protection étendue assurée par le casque (zone 1a-1b et 3b)

E2 Indique l’isolation électrique du casque mouillé.

E3 Indique une surface non conductrice de la calotte.

*** / ** Indique une protection à basse température jusqu’à -30 °C/ -20 °C

C

Indique une résistance aux produits chimiques liquides. (acide sulfurique,

hydroxyde de sodium, p-xylène, butan-1-ol, n-heptane)

Marquage (roue

de gouvernail) :

Conforme à la directive 96/98/CE relative aux équipements marins (MED)

Organisme de

certification

Écran facial :

INSPEC Ltd (0194), 56 Leslie Hough Way, Salford,

Greater Manchester, M6 6AJ, Royaume-Uni

Écran oculaire

DEKRA EXAM (0158), Dinnendahlstr. 9,

D-44809 Bochum

Normes et

directives :

89/686/CEE Équipement de protection individuelle

EN 14458:2004 Équipement de protection individuelle des yeux

(+) Conforme aux exigences supplémentaires des pompiers

Type d’écran : protection oculaire

Type d’écran : écran facial

-30 °C ; 120 °C Températures extrêmes auxquelles l’écran a été testé (-30 °C et +120 °C)

ȍ Conforme aux propriétés électriques

A Résistance à l’impact à haute énergie 190 ms-1

T Résistance à l’impact d’énergie moyenne à des températures extrêmes

AT Résistance à l’impact à haute énergie (190 ms-1) à des températures extrêmes

K Résistance à l’abrasion conformément à EN 168 : 2001, clause 15

N Résistance à la condensation

2C-2.5 et 2C-1.2 Filtre UV conformément à EN 170:2002

)$6,76UO- Via Orsera 13/b - 34145 TRIESTE - ITALY - Tel +39 040 825604 - www.fasit.it - [email protected]

6

Ajustement du casque

FR

La protection contre la chaleur rayonnante assurée par les écrans faciaux varie avec la température

de la source de chaleur, comme le montre la figure ci-dessus. Il est recommandé d'utiliser uniquement

l'écran facial s'il peut réduire l'exposition à la chaleur des yeux de l'utilisateur à moins de 100 W/m2.

AVERTISSEMENT!

S'il est fixé avec un autre élément de l'équipement de protection individuelle ou avec un accessoire

(différent de celui fourni par le fabricant du casque pour l'utilisation avec ce casque particulier), il est

possible qu'un casque marqué comme étant conforme à la norme EN 443 ne réponde plus à toutes

les clauses de la norme. Reportez-vous aux informations fournies par le fabricant du casque.

3 Ajustement du casque

3.1 Avant la mise en place

Protection contre la chaleur rayonnante

Source de température (K)

% Transmission

35

40

45

50

55

60

65

70

75

1600 1800 2000 2200 2400 2450 2600 2800 3000 3200

GA1086A

GA1086B

(1) Choisissez un casque de taille M ou L (voir

Caractéristiques techniques) selon votre

tour de tête.

(2) Ajustez le bandeau tour de tête avant en le

faisant glisser vers le haut ou le bas.

(3) Positionnez le bandeau tour de tête avant

dans le casque pour éviter le contact entre le

bandeau et le masque.

(4) Ajustez le bandeau tour de tête arrière en

tournant pour optimiser l’ajustement sur

l’arrière de la tête.

)$6,76UO- Via Orsera 13/b - 34145 TRIESTE - ITALY - Tel +39 040 825604 - www.fasit.it - [email protected]

Sidan laddas ...

MSA Gallet F1 XF Bruksanvisningar

MSA Gallet F1 XF Bruksanvisningar

på andra språk

Relaterade papper

Andra dokument