Electrolux EHD90230P Användarmanual

varumärke: Electrolux

Modell: EHD90230P

Kategori: Kokplattor

Typ: Användarmanual

user manual

notice d'utilisation

bruksanvisning

manual de instrucciones

bruksanvisning

Induction Hob

Table de cuisson à induction

Induksjonskoketopp

Placa de inducción

Induktionshäll

EHD90230P

Electrolux. Thinking of you.

Share more of our thinking at www.electrolux.com

CONTENTS

Safety information 2

Installation instructions 3

Product description 5

Operating instructions 6

Helpful hints and tips 9

Care and cleaning 10

What to do if… 11

Environment concerns 12

Warranty 12

Subject to change without notice.

SAFETY INFORMATION

For your safety and correct operation

of the appliance, read this manual

carefully before installation and use. Al-

ways keep these instructions with the

appliance even if you move or sell it.

Users must fully know the operation

and safety features of the appliance.

GENERAL SAFETY

Warning! Persons (including children)

with reduced physical sensory, mental

capabilities or lack of experience and

knowledge must not use the appliance.

They must have supervision or

instruction for the operation of the

appliance by a person responsible for

their safety.

CHILD SAFETY

• Only adults can use this appliance. Chil-

dren must get supervision to make sure

that they do not play with the appliance.

• Keep all packaging away from children.

There is a risk of suffocation.

• Keep children away from the appliance

when it is on.

Warning! Start the child safety device

to prevent small children and pets from

an accidental activation of the

appliance.

SAFETY DURING OPERATION

• Remove all packaging, stickers and lay-

ers from the appliance before the first

use.

• Set the cooking zones to "off" after each

use.

• Risk of burns! Do not put metallic ob-

jects, for example cutlery or saucepan

lids, on the cooking surface, as they can

become hot.

• Users with an implanted pacemaker must

keep their upper body minimum 30 cm

from induction cooking zones that are

switched on.

Warning! Fire danger! Overheated

fats and oils can catch fire very quickly.

CORRECT OPERATION

• Always monitor the appliance during op-

eration.

• Only use the appliance for domestic

cooking tasks!

• Do not use the appliance as a work or a

storage surface.

• Do not put or keep very flammable liquids

and materials, or fusible objects (made of

plastic or aluminium) on or near the appli-

ance.

• Be careful when you connect the appli-

ance to the near sockets. Do not let elec-

tricity bonds touch the appliance or hot

cookware. Do not let electricity bonds

tangle.

HOW TO PREVENT A DAMAGE TO THE

APPLIANCE

• If the objects or cookware fall on the

glass ceramic, the surface can be dam-

aged.

• Cookware made of cast iron, cast alumi-

nium or with damaged bottoms can

scratch the glass ceramic if you move

them on the surface.

2 electrolux

• Do not let cookware boil dry to prevent

the damage to cookware and glass ce-

ramics.

• Do not use the cooking zones with empty

cookware or without cookware.

• Do not cover the parts of the appliance

with aluminium foil.

• Do not cover the ventilation space of 5

mm between the worktop and front of

the unit below it.

Caution!

5 mm ventilation space is essential, failure

to include this during installation can cause

appliance malfunctions which are not cov-

ered under warranty.

Warning! If there is a crack on the

surface, disconnect power supply

to prevent the electric shock.

INSTALLATION INSTRUCTIONS

Before the installation, note down

the serial number (Ser. Nr.) from the

rating plate.The rating plate of the

appliance is on its lower casing.

EHD90230P

949 594 167 01

58 GCD E2 AU

ELECTROLUX

220-240 V 50-60 Hz

6,9 kW

Induction 6,9 kW

SAFETY INSTRUCTIONS

Warning! You must read these!

Make sure that the appliance is not

damaged because of transportation.

Do not connect a damaged appliance.

If it is necessary, speak to the supplier.

Only an authorised service technician

can install, connect or repair this appli-

ance. Use only original spare parts.

Only use built-in appliances after you

assemble the appliance into correct

built-in units and work surfaces that

align to the standards.

Do not change the specifications or

modify this product. Risk of injury and

damage to the appliance.

Fully obey the laws, ordinances, direc-

tives and standards in force in the

country where you use the appliance

(safety regulations, recycling regula-

tions, electrical safety rules etc.)!

Keep the minimum distances to other

appliances and units!

Install anti-shock protection, for exam-

ple install the drawers only with a pro-

tective floor directly below the appli-

ance!

Protect the cut surfaces of the worktop

against moisture with a correct sealant!

Seal the appliance to the work top with

no space left with a correct sealant!

Protect the bottom of the appliance

from steam and moisture, e.g. from a

dishwasher or oven!

Do not install the appliance adjacent to

doors and below windows! If not, hot

cookware can be hit off the hob when

you open doors or windows.

Warning! Risk of injury from electrical

current. Carefully obey the instructions

for electrical connections.

• The electrical mains terminal is live.

• Make electrical mains terminal free of

voltage.

• Install correctly to give anti-shock protec-

tion.

• Loose and incorrect plug and socket

connections can make the terminal be-

come too hot.

• A qualified electrician must install the

clamping connections correctly.

• Use a strain relief clamp on cable.

• Use the correct mains cable of type

H05BB-F Tmax 90°C (or higher) for a sin-

gle-phase or two-phase connection.

• Replace the damaged mains cable with a

special cable (type H05BB-F Tmax 90°C;

or higher). Speak your local Service Force

Centre.

The appliance must have the electrical in-

stallation which lets you disconnect the ap-

pliance from the mains at all poles with a

contact opening width of minimum 3 mm.

You must have correct isolation devices:

line protecting cut-outs, fuses (screw type

fuses removed from the holder), earth leak-

age trips and contactors.

electrolux 3

STICKING ON THE SEAL

• Clean the worktop in the area of the cut-

out section.

• Bond the sealing tape to the lower edge

of the cooking surface along the outer

edge of the glass ceramic. Do not extend

it. Let stay the cut ends in the middle of

one side. When you have cut it to length

(add some mm), push the two ends to-

gether.

ASSEMBLY

min.

50mm

min.

50mm

min.

500mm

min.

5mm

600mm

380

880

R 5mm

min.

25 mm

min.

5 mm

min.

20 mm

4 electrolux

min.

38 mm

min.

5 mm

If you use a protection box (the addi-

tional accessory

), the front airflow

space of 5 mm and protective floor di-

rectly below the appliance are not nec-

essary.

You can not use the protection box if

you install the appliance above an

oven.

PRODUCT DESCRIPTION

COOKING SURFACE LAYOUT

1 2

Induction cooking zone 2300W, with

Power function 3200W

Induction cooking zone 2300W, with

Power function 3200W

Induction cooking zone 2300W, with

Power function 3200W

Control panel

CONTROL PANEL LAYOUT

1 2 3 4 5

12 11

6 7

1) The protection box accessory may not be available in some countries. Please contact your local supplier.

electrolux 5

Use the sensor fields to operate the appliance.

sensor field function

starts and stops the hob

starts and stops the key lock or child lock

activates Power function

cooking zones' indicators of timer shows for which zone you set the time

the timer display shows the time in minutes

a heat setting indicators show the heat setting

shows that:

• there is no cookware on the cooking zone

• the cookware is not correct

• automatic switch off is active

shows that cooking zone stays hot

a control bar to set the heat setting

increases or decreases the time

selects the cooking zone

starts and stops STOP+GO

+number in the timer display shows

that there is a malfunction.

RESIDUAL HEAT INDICATOR

Warning! Risk of burns from

residual heat!

The induction cooking zones make the heat

necessary for cooking directly in the bottom

of the cookware. The glass ceramic is heat-

ed by the residual heat of the cookware.

OPERATING INSTRUCTIONS

ON AND OFF

Touch

for 1 second to start or stop the

appliance.

AUTOMATIC SWITCH OFF

The function stops the hob

automatically if:

• all cooking zones are off.

• you do not set the heat setting after you

start the hob.

• you cover a sensor field with an object (a

pan, a cloth, etc.) for longer than 10 sec-

onds. The sound operates until you re-

move the object.

• the hob gets too hot (e.g. when a sauce-

pan boils dry). Before you use the hob

again, the cooking zone must be cool.

•

you use incorrect cookware.

comes

on and after 2 minutes the cooking zone

stops automatically.

• you do not stop a cooking zone or

change the heat setting. After some time

comes on and the hob stops. See the

table.

Automatic Switch Off times

Heat setting

1-2 3-4 5 6-9

Stops after 6 hours 5 hours 4 hours 1.5 hours

6 electrolux

THE HEAT SETTING

Touch the control bar at the heat setting.

The heat setting indicators come on.

THE AUTOMATIC HEAT UP

The Automatic heat up function sets the

highest heat setting for some time, and

then decreases to the necessary level.

Touch

. The indicator flashes. Set the

heat setting (1-8). The indicator of the heat

setting comes on. The indicator above

comes on and after some time goes out.

The time of the automatic heat up changes

for different heat settings.

123456789

SWITCHING THE POWER FUNCTION

ON AND OFF

The Power function makes more power

available to the induction cooking zones.

The Power function is activated for 10 mi-

nutes at most. After that the induction

cooking zone automatically switches back

to the highest heat setting (9). To switch on,

touch

, the indicator above comes on.

To switch off, touch a heat setting (1-9).

POWER MANAGEMENT

The power management divides the power

between two cooking zones in a pair (see

the figure). The power function increases

the power to the maximum level for one

cooking zone in the pair and automatically

decreases in the second cooking zone to a

lower power level. The display for the re-

duced zone alternates.

USING THE TIMER

Count Down Timer

Use the Count Down Timer to set how long

the cooking zone operates for one cooking

session.

Set the Count Down Timer after the se-

lection of the cooking zone.

You can set the heat setting before or after

you set the timer.

• Selection of the cooking zone:touch

again and again until the indicator of a

necessary cooking zone comes on.

• Starting the Count Down Timer: touch

of the timer to set the time (

minutes). When the indicator of the cook-

ing zone flashes slower, the time counts

down.

• Checking the remaining time: select

the cooking zone with

. The indicator

of the cooking zone flashes faster. Dis-

play shows the remaining time.

• Changing the Count Down Timer:se-

lect the cooking zone with

touch or

electrolux 7

• Stopping the timer: select the cooking

zone with

. Touch . The remaining

time counts backwards to

. The indi-

cator of the cooking zone goes out. To

switch off You can also touch

and

at the same time.

When the time elapses, the sound oper-

ates and

flashes. The cooking zone

switches off.

•

Stopping the sound: touch

CountUp Timer (Count up timer)

Use the CountUp Timer to monitor how

long the cooking zone operates.

• Selection of the cooking zone (if

more than 1 cooking zone oper-

ate):touch

again and again until the

indicator of a necessary cooking zone

comes on.

•

Starting the CountUp Timer:touch

of the timer comes on. When the indi-

cator of the cooking zone flashes slower,

the time counts up, display switches be-

tween

and time elapsed (minutes)

• Checking the elapsed time: select the

cooking zone with

. The indicator of

the cooking zone flashes faster. Display

shows the elapsed time.

• Stopping the CountUp Timer: select

the cooking zone with

and touch

or to switch off the timer. The indicator

of the cooking zone goes out.

Minute Minder

You can use the timer as a Minute Minder

while cooking zones do not operate. Touch

. Touch or of the timer to select

the time. When the time elapses, the sound

operates and

flashes.

•

Stopping the sound: touch

STOP+GO

The

function sets all cooking zones that

operate to the lowest heat setting.

When

operates, you cannot change the

heat setting.

The

function does not stop the timer

function.

•

To activate this function touch

. The

indicator comes on.

•

To deactivate this function touch

The heat setting that you set before

comes on.

LOCK

You can lock the control panel, but not

It prevents an accidental change of the heat

setting.

To start this function touch

. The indica-

tor comes on.

The Timer stays on.

To stop this function touch

. The indica-

tor goes out.

When you stop the appliance, you also stop

this function.

THE CHILD SAFETY DEVICE

This function prevents an accidental opera-

tion of the hob.

Starting the child safety device

•

Start the hob with

. Do not set the

heat settings.

•

Touch

for 4 seconds. The indicator

comes on.

•

Stop the hob with

Switching off the child safety device

•

Start the hob with

. Do not set the

heat settings. Touch

for 4 seconds.

The indicator goes out.

•

Stop the hob with

Overriding the child safety device for

one cooking session

•

Start the hob with

. The indicator

comes on.

•

Touch

for 4 seconds. Set the heat

setting in less than 10 seconds. You

can operate the hob.

•

When you stop the hob with

, the

child safety device operates again.

OFFSOUND CONTROL (DEACTIVATION

AND ACTIVATION OF THE SOUNDS)

Deactivation of the sounds

Deactivate the appliance.

Touch

for 3 seconds. The displays come

on and go out. Touch

for 3 seconds.

comes on, the sound is on. Touch ,

comes on, the sound is off.

When this function operates, you can hear

the sounds only when:

8 electrolux

•

you touch

• the Minute Minder comes down

• the Count Down Timer comes down

• you put something on the control panel.

Activation of the sounds

Deactivate the appliance.

Touch

for 3 seconds. The displays come

on and go out. Touch

for 3 seconds.

comes on, because the sound is off. Touch

, comes on. The sound is on.

HELPFUL HINTS AND TIPS

Use the induction cooking zones with

suitable cookware.

COOKWARE FOR INDUCTION

COOKING ZONES

Important! In induction cooking a powerful

electromagnetic field generates an almost

instant heat inside the cookware.

Cookware material

• correct: cast iron, steel, enamelled steel,

stainless steel, a multi-layer bottom

(marked as correct by a manufacturer).

• not correct: aluminium, copper, brass,

glass, ceramic, porcelain.

Cookware is correct for an induction

hob if …

• ... some water boils very quickly on a

zone set to the highest heat setting..

• ... a magnet pulls on to the bottom of the

cookware.

The bottom of the cookware must

be as thick and flat as possible.

Cookware dimensions: induction

cooking zones adapt to the dimension

of the bottom of the cookware auto-

matically to some limit. But, the mag-

netic part of the bottom of the cook-

ware must have a minimum diameter of

approximately 3/4 of the cooking

zones.

OPERATING NOISES

If you can hear

• cracking noise: cookware is made of dif-

ferent materials (Sandwich construction).

• whistling: you use one or more cooking

zones with high power levels and the

cookware is made of different materials

(Sandwich construction).

• humming: you use high power levels.

• clicking: electric switching occurs.

• hissing, buzzing: the fan operates.

The noises are normal and do not refer

to any defects.

ENERGY SAVING

• If possible, always put the lids on the

cookware.

•Put cookware on a cooking zone be-

fore you start it.

• Stop the cooking zones before the

end of the cooking time to use resid-

ual heat.

• The bottom of pans and cooking

zones must have the same dimen-

sion.

ÖKO TIMER (ECO TIMER)

To save the energy, the heater of the

cooking zone switches itself off earlier

than count down timer signal. The

heating time reduction depends on

cooking level and cooking time.

EXAMPLES OF COOKING

APPLICATIONS

The data in the table is for guidance only.

Heat

set-

ting

Use to: Time Hints

-1

Keep cooked foods warm as re-

quired

Cover the food

electrolux 9

Heat

set-

ting

Use to: Time Hints

1-2 Hollandaise sauce, melt: butter, choco-

late, gelatine

5-25

min

Mix occasionally

1-2 Solidify: fluffy omelettes, baked eggs 10-40

min

Cook with a lid on

2-3 Simmer rice and milkbased dishes,

heating up ready-cooked meals

25-50

min

Add at least twice as much liquid as

rice, stir milk dishes part way

through

3-4 Steam vegetables, fish, meat 20-45

min

Add a few tablespoons of liquid

4-5 Steam potatoes 20-60

min

Use max. ¼ l water for 750 g of po-

tatoes

4-5 Cook larger quantities of food, stews

and soups

60-150

min

Up to 3 l liquid plus ingredients

6-7 Gentle fry: escalope, veal cordon bleu,

cutlets, rissoles, sausages, liver, roux,

eggs, pancakes, doughnuts

as re-

quired

Turn halfway through

7-8 Heavy fry, hash browns, loin steaks,

steaks

5-15

min

Turn halfway through

9 Boil large quantities of water, cook pasta, sear meat (goulash, pot roast), deep fry chips

The Power function is suitable for heating

large quantities of water.

Information on acrylamides

Important! According to the newest

scientific knowledge, if you brown food

(specially the one which contains starch),

acrylamides can pose a health risk. Thus,

we recommend that you cook at the lowest

temperatures and do not brown food too

much.

CARE AND CLEANING

Clean the appliance after each use.

Always use cookware with clean bottom.

Warning! Sharp objects and abrasive

cleaning agents will damage the

appliance.

For your safety, do not clean the appli-

ance with steam blasters or high-pres-

sure cleaners.

Scratches or dark stains on the glass

ceramic have no effect on how the ap-

pliance operates.

To remove the dirt:

1. – Remove immediately:melted plas-

tic, plastic foil, and food with sugar. If

not, the dirt can cause damage to

the appliance. Use a special scraper

for the glass . Put the scraper on the

glass surface at an acute angle and

move the blade on the surface .

–

Remove after the appliance is

sufficiently cool:limescale rings ,

water rings, fat stains, shiny metallic

discolorations. Use a special cleaning

agent for glass ceramic or stainless

steel.

2. Clean the appliance with a moist cloth

and some detergent.

3. At the end rub the appliance dry

with a clean cloth.

10 electrolux

WHAT TO DO IF…

Problem Possible cause and remedy

You cannot start the appliance

or operate it.

• You touched 2 or more sensor fields at the same time. Only

touch one sensor field.

• There is water or fat stains on the control panel. Clean the con-

trol panel

•

The child safety device or key lock or

operates . See the

chapter Operating the appliance.

• Start the appliance again and set the heat setting within 10

seconds.

A sound operates (6x) and the

appliance stops or a sound op-

erates when the appliance is

off.

You covered one or more sensor fields. Uncover the sensor

fields.

The residual heat indicator

does not come on.

The cooking zone is not hot because it operated only for a short

time. If the cooking zone is supposed to be hot, speak to the Af-

ter Sales Service.

A sound operates and appli-

ance starts and stops again.

After 5 seconds one more

sound operates.

You covered . Uncover the sensor field.

Heat setting alternates The Power management is active. See the section Power man-

agement.

comes on

• No cookware on the cooking zone. Put cookware on the cook-

ing zone.

• Not correct cookware. Use the correct cookware.

• The diameter of the bottom of the cookware is too small for the

cooking zone. Move cookware to a smaller cooking zone.

• The automatic switch-off operates. Stop the appliance and

start it again.

• Overheating protection for the cooking zone operates. Switch

off the cooking zone. Switch on the cooking zone again.

and number come on.

There is an error in the appliance.

Disconnect the appliance from the electrical supply for some

time. Disconnect the fuse from the electrical system of the house.

Connect again. If

comes on again, speak to the after sales

service.

comes on

There is an error in the appliance, because a cookware boils dry

or you use not correct cookware. Overheating protection for the

cooking zone operates. The automatic switch-off operates.

Switch off the appliance. Remove the hot cookware. After ap-

proximately 30 seconds switch on the cooking zone again.

should disappear, residual heat indicator can stay. Cool down the

cookware and check it with the section "Cookware for the induc-

tion cooking zone".

If you tried the above solutions and cannot

repair the problem, speak to your dealer or

the Customer Care Department. Give the

data from the rating plate, three-digit-letter

code for the glass ceramic (it is in the cor-

ner of the cooking surface) and an error

message that comes on.

If you operated the appliance incorrectly,

the servicing by a customer service techni-

cian or dealer will not be free of charge,

even during the warranty period. The in-

structions about the customer service and

conditions of guarantee are in the guaran-

tee booklet.

electrolux 11

ENVIRONMENT CONCERNS

The symbol on the product or on its

packaging indicates that this product may

not be treated as household waste. Instead

it should be taken to the appropriate

collection point for the recycling of electrical

and electronic equipment. By ensuring this

product is disposed of correctly, you will

help prevent potential negative

consequences for the environment and

human health, which could otherwise be

caused by inappropriate waste handling of

this product. For more detailed information

about recycling of this product, please

contact your local council, your household

waste disposal service or the shop where

you purchased the product.

PACKAGING MATERIAL

The packaging materials are friendly to

the environment and can be recycled.

The plastic components are identified

by marking: >PE<,>PS<, etc. Discard

the packaging materials as household

waste at the waste disposal facilities in

your municipality.

WARRANTY

FOR SALES IN AUSTRALIA AND NEW

ZEALAND

APPLIANCE: BUILT-IN OVEN, COOKTOP

AND FREESTANDING COOKER

This document sets out the terms and

conditions of the product warranties

for Electrolux Appliances. It is an im-

portant document. Please keep it with

your proof of purchase documents in a

safe place for future reference should

you require service for your Appliance.

1. In this warranty

a) ‘acceptable quality’ as referred to in

clause 10 of this warranty has the

same meaning referred to in the

ACL;

b) ‘ACL’ means Trade Practices

Amendment (Australian Consumer

Law) Act (No.2) 2010;

c) ‘Appliance’ means any Electrolux

product purchased by you accom-

panied by this document;

d) ‘ASC’ means Electrolux’ authorised

serviced centres;

e) ‘Electrolux’ means Electrolux Home

Products Pty Ltd of 163 O’Riordan

Street, Mascot, NSW 2020, ABN 51

004 762 341 in respect of Applian-

ces purchased in Australia and

Electrolux (NZ) Limited of 3-5 Niall

Burgess Road, Mount Wellington, in

respect of Appliances purchased in

New Zealand;

f) ‘major failure’ as referred to in

clause 10 of this warranty has the

same meaning referred to in the

ACL and includes a situation when

an Appliance cannot be repaired or

it is uneconomic for Electrolux, at its

discretion, to repair an Appliance

during the Warranty Period;

g) ‘Warranty Period’ means:

– where the Appliance is used for

personal, domestic or household

use (i.e. normal single family use)

as set out in the instruction man-

ual, the Appliance is warranted

against manufacturing defects in

Australia for 24 months and in

New Zealand for 24 months, fol-

lowing the date of original pur-

chase of the Appliance;

– where the Appliance is used for

commercial purposes (including

being used to directly assist a

business or where the Appliance

is used in a multi-family commu-

nal or share type environment),

the Appliance will then be warran-

ted against manufacturing de-

fects in Australia for 3 months

and in New Zealand for 3

months, following the date of

original purchase of the Appli-

ance.

h) ‘you’ means the purchaser of the

Appliance not having purchased the

Appliance for re-sale, and ‘your’ has

a corresponding meaning.

12 electrolux

2. This warranty only applies to Applian-

ces purchased and used in Australia or

New Zealand and is in addition to (and

does not exclude, restrict, or modify in

any way) any non-excludable statutory

warranties in Australia or New Zealand.

3. During the Warranty Period Electrolux

or its ASC will, at no extra charge if

your Appliance is readily accessible for

service, without special equipment and

subject to these terms and conditions,

repair or replace any parts which it con-

siders to be defective. Electrolux or its

ASC may use remanufactured parts to

repair your Appliance. You agree that

any replaced Appliances or parts be-

come the property of Electrolux. This

warranty does not apply to light globes,

batteries, filters or similar perishable

parts.

4. Parts and Appliances not supplied by

Electrolux are not covered by this war-

ranty.

5. You will bear the cost of transportation,

travel and delivery of the Appliance to

and from Electrolux or its ASC. If you

reside outside of the service area, you

will bear the cost of:

a) travel of an authorised representa-

tive;

b) transportation and delivery of the

Appliance to and from Electrolux or

its ASC,

In all instances, unless the Appliance is

transported by Electrolux or an Electro-

lux authorised representative, the Appli-

ance is transported at the owner’s cost

and risk while in transit to and from

Electrolux or its ASC.

6. Proof of purchase is required before

you can make a claim under this war-

ranty.

7. You may not make a claim under this

warranty unless the defect claimed is

due to faulty or defective parts or work-

manship. Electrolux is not liable in the

following situations (which are not ex-

haustive):

a) the Appliance is damaged by:

– accident

– misuse or abuse, including failure

to properly maintain or service

– normal wear and tear

– power surges, electrical storm

damage or incorrect power sup-

ply

– incomplete or improper installa-

tion

– incorrect, improper or inappropri-

ate operation

– insect or vermin infestation

– failure to comply with any addi-

tional instructions supplied with

the Appliance;

b) the Appliance is modified without

authority from Electrolux in writing;

c) the Appliance’s serial number or

warranty seal has been removed or

defaced;

d) the Appliance was serviced or re-

paired by anyone other than Elec-

trolux, an authorised repairer or

ASC.

8. This warranty, the contract to which it

relates and the relationship between

you and Electrolux are governed by the

law applicable where the Appliance

was purchased. Where the Appliance

was purchased in New Zealand for

business purposes the Consumer

Guarantee Act does not apply.

9. To the extent permitted by law, Electro-

lux excludes all warranties and liabilities

(other than as contained in this docu-

ment) including liability for any loss or

damage whether direct or indirect aris-

ing from your purchase, use or non use

of the Appliance.

10. For Appliances and services provided

by Electrolux in Australia, the Applian-

ces come with a guarantee by Electro-

lux that cannot be excluded under the

Australian Consumer Law. You are en-

titled to a replacement or refund for a

major failure and for compensation for

any other reasonably foreseeable loss

or damage. You are also entitled to

have the Appliance repaired or re-

placed if the Appliance fails to be of ac-

ceptable quality and the failure does

not amount to a major failure. The ben-

efits to you given by this warranty are in

addition to your other rights and rem-

edies under a law in relation to the Ap-

pliances or services to which the war-

ranty relates.

electrolux 13

11. At all times during the Warranty Period,

Electrolux shall, at its discretion, deter-

mine whether repair, replacement or re-

fund will apply if an Appliance has a val-

id warranty claim applicable to it.

12. For Appliances and services provided

by Electrolux in New Zealand, the Ap-

pliances come with a guarantee by

Electrolux pursuant to the provisions of

the Consumer Guarantees Act, the

Sale of Goods Act and the Fair Trading

Act.

13. To enquire about claiming under this

warranty, please follow these steps:

a) carefully check the operating in-

structions, user manual and the

terms of this warranty;

b) have the model and serial number

of the Appliance available;

c) have the proof of purchase (eg an

invoice) available;

d) telephone the numbers shown be-

low.

14. You accept that if you make a warranty

claim, Electrolux and its ASC may ex-

change information in relation to you to

enable Electrolux to meet its obligations

under this warranty.

Important Notice

Before calling for service, please ensure that the steps listed in point 13 above have been

followed.

FOR SERVICE

or to find the address of your

nearest state service centre in

Australia

Please call 13 13 4 9

For the cost of a local call (Australia on-

ly)

SERVICE AUSTRALIA

ELECTROLUX HOME

PRODUCTS

www.electrolux.com.au

FOR SPARE PARTS

or to find the address of your

nearest state spare parts cen-

tre in Australia

Please call 13 13 50

For the cost of a local call (Australia on-

ly)

FOR SERVICE

or to find the address of your

nearest authorised service cen-

tre in New Zealand

Free call 0800 10 66 10

(New Zealand only)

SERVICE NEW ZEALAND

ELECTROLUX HOME

PRODUCTS

www.electrolux.co.nz

FOR SPARE PARTS

or to find the address of your

nearest state spare parts cen-

tre in New Zealand

Free call 0800 10 66 20

(New Zealand only)

14 electrolux

Electrolux. Thinking of you.

Partagez notre imagination sur www.electrolux.com

SOMMAIRE

Consignes de sécurité 15

Instructions d'installation 16

Description de l'appareil 18

Notice d'utilisation 20

Conseils utiles 23

Entretien et nettoyage 24

En cas d'anomalie de fonctionnement 25

En matière de protection de

l'environnement 26

Sous réserve de modifications.

CONSIGNES DE SÉCURITÉ

Pour votre sécurité et le bon fonction-

nement de l'appareil, lisez attentive-

ment ce manuel avant l'installation et

l'utilisation. Conservez ces instructions

à proximité de l'appareil. Les utilisa-

teurs doivent connaître parfaitement le

fonctionnement et les fonctions de sé-

curité de l'appareil.

AVERTISSEMENTS IMPORTANTS

Avertissement Cet appareil n'est pas

conçu pour être utilisé par des

personnes (y compris des enfants) dont

les facultés physiques, sensorielles ou

mentales sont réduites, ou qui

manquent d'expérience et de

connaissances, à moins qu'une

personne responsable de leur sécurité

ne les supervise ou leur donne des

instructions sur la manière de l'utiliser.

SÉCURITÉ DES ENFANTS

• Cet appareil a été conçu pour être utilisé

par des adultes. Veillez à ce que les en-

fants n'y touchent pas et ne l'utilisent pas

comme un jouet.

• Ne laissez pas les emballages à portée

de main des enfants. Ils pourraient s'as-

phyxier !

• Tenez les enfants éloignés de l'appareil

pendant son fonctionnement.

Avertissement La sécurité enfants

empêche l'utilisation accidentelle ou

involontaire de l'appareil.

UTILISATION

• Retirez tous les emballages, les étiquet-

tes et les films protecteurs de l'appareil

(sauf la plaque signalétique) avant de

l'utiliser pour la première fois.

• Mettez les zones de cuisson à l'arrêt

après chaque utilisation.

• Risque de brûlures ! Ne posez aucun ob-

jet contenant du métal, comme les cou-

verts et couvercles de récipients sur la ta-

ble de cuisson. Ils risqueraient de

s'échauffer.

• Les utilisateurs porteurs d'un pacemaker

doivent se tenir à une distance d'au

moins 30 cm (au niveau du buste) des

zones de cuisson à induction mises en

fonctionnement.

Avertissement Danger d'incendie !

Surveillez attentivement la cuisson lors

de friture dans l'huile ou la graisse : les

graisses surchauffées s'enflamment

facilement.

UTILISATION

• Surveillez toujours l'appareil pendant son

fonctionnement.

• Votre appareil est destiné à un usage do-

mestique normal.

• N'utilisez pas l'appareil comme plan de

travail ou support.

• Ne posez pas ou ne stockez pas de liqui-

des ou des matériaux inflammables, des

objets susceptibles de fondre (plastique,

aluminium) sur ou à proximité de l'appa-

reil.

• Faites attention si vous branchez d'autres

appareils électriques à des prises situées

electrolux 15

à proximité de la table de cuisson. Con-

trôlez que les câbles d'alimentation n'en-

trent pas en contact avec les surfaces

brûlantes de l'appareil ou les récipients

brûlants. Contrôlez que les câbles ne

soient pas enchevêtrés.

COMMENT ÉVITER D'ENDOMMAGER

L'APPAREIL

•Des objets ou des récipients de cuisson

peuvent, en tombant, endommager la

surface vitrocéramique.

• N'utilisez pas de récipients en fonte, ni de

récipients dont le fond est endommagé

et rugueux. Ils risqueraient de rayer la ta-

ble de cuisson.

• Ne faites pas "brûler" les récipients et ne

laissez pas le contenu s'évaporer en to-

talité. Cela peut entraîner des dégats per-

manents des récipients et de la table de

cuisson.

• Ne placez pas de plats de cuisson vides

sur les zones de cuisson et ne mettez

pas ces dernières en fonctionnement

sans récipient.

• Ne recouvrez aucune partie de l'appareil

à l'aide de feuilles d'aluminium.

• Laissez un espace ouvert de 5 mm sous

le plan de travail et à l'avant de l'appareil

pour la ventilation.

Avertissement Si votre table de

cuisson est endommagée (éclat,

fêlure,...), débranchez votre

appareil pour éviter tout risque

d'électrocution.

INSTRUCTIONS D'INSTALLATION

Avant d'installer l'appareil, notez le

numéro de série qui figure sur la plaque

signalétique.La plaque signalétique

se trouve sur la partie inférieure de

l'appareil.

EHD90230P

949 594 167 01

58 GCD E2 AU

ELECTROLUX

220-240 V 50-60 Hz

6,9 kW

Induction 6,9 kW

AVERTISSEMENT IMPORTANTS

Avertissement Veuillez lire

attentivement cette notice d'utilisation

ainsi que les recommandations et les

avertissements qu'elle contient avant

de procéder à l'installation et à la

première utilisation de l'appareil.

Vérifiez que l'appareil n'a pas été en-

dommagé pendant le transport. Ne

branchez jamais un appareil endom-

magé. Si nécessaire, contactez le ma-

gasin vendeur.

Les opérations d'installation, de bran-

chement et de réparation sont du res-

sort exclusif d'un technicien qualifié. En

cas d'intervention sur l'appareil, exigez

du Service Après-vente des pièces de

rechange certifiées constructeur.

Les appareils encastrables ne peuvent

être mis en fonctionnement qu'après

avoir été installés dans des meubles et

des plans de travail homologués et

adaptés.

Ne modifiez pas ou n'essayez pas de

modifier les caractéristiques de cet ap-

pareil. Cela représenterait un danger

pour vous.

L'installation doit être conforme à la lé-

gislation, la réglementation, les lignes

directrices et les normes en vigueur

dans le pays de résidence (consignes

de sécurité électro-techniques et régle-

mentation, recylage conforme et régle-

mentaire, etc.).

Respectez l'espacement minimal re-

quis par rapport aux autres appareils !

La protection contre les contacts acci-

dentels doit être assurée par le monta-

ge, par exemple les tiroirs doivent être

installés uniquement avec un plancher

de protection directement sous l'appa-

reil.

Protégez l'appareil de l'humidité en

plaçant un joint d'étanchéité dans les

rainures du plan de travail.

Le joint comble les fentes entre le plan

de travail et l'appareil.

Protégez la partie inférieure de l'appa-

reil de la vapeur et de l'humidité éma-

nant, par exemple, d'un lave-vaisselle

ou d'un four.

N'installez pas l'appareil à proximité

d'une porte ou sous une fenêtre ! Les

récipients chauds sur la table de cuis-

16 electrolux

son risquent de tomber lors de l'ouver-

ture de la porte ou de la fenêtre.

Avertissement Le courant électrique

peut provoquer des blessures. Les

opérations d'installation et de

branchement doivent être réalisées par

un technicien qualifié.

• La borne d'alimentation est sous tension.

• Mettez la borne d'alimentation hors ten-

sion.

• Assurez-vous que l'appareil est correcte-

ment installé de manière à éviter tout

contact.

• Des connexions desserrées ou incorrec-

tes peuvent être à l'origine d'une sur-

chauffe des bornes.

• Le raccordement électrique ne doit être

effectué que par un électricien qualifié.

• Le câble ne doit pas être tendu.

• En cas de raccordement monophasé ou

biphasé, utilisez impérativement le câble

d'alimentation approprié de type H05BB-

F Tmax 90°C (ou plus).

• Si le câble d'alimentation est endomma-

gé, il doit être remplacé par un câble

spécial (type H05BB-F Tmax 90°C ; ou

plus). Veuillez vous adresser au Service

Après-vente.

Dans le cas d'une installation fixe, le raccor-

dement au réseau doit être effectué par l'in-

termédiaire d'un interrupteur à coupure om-

nipolaire, ayant une distance d'ouverture

des contacts d'au moins 3 mm.

Les dispositifs d'isolement comprennent :

des coupe-circuits, des fusibles (les fusibles

à visser doivent être retirés du support), des

disjoncteurs de mise à la terre et des con-

tacteurs.

MISE EN PLACE DU JOINT

• Nettoyez la zone de la découpe du plan

de travail.

• Collez le joint d'étanchéité sur le bord in-

férieur de la surface de cuisson, le long

du bord extérieur de la vitrocéramique.

Ne l'étirez pas. Le point de jonction doit

se trouver au milieu d'un côté. Après

avoir mesuré la longueur (prévoyez quel-

ques mm en plus), appuyez fermement

sur les deux extrémités en même temps.

MONTAGE

min.

50mm

min.

50mm

min.

500mm

min.

5mm

600mm

380

880

R 5mm

electrolux 17

min.

25 mm

min.

5 mm

min.

20 mm

min.

38 mm

min.

5 mm

Si vous utilisez une enceinte de protec-

tion (accessoire en option

), l'espace

de circulation d'air de 5 mm et le fond

de protection installé directement sous

l'appareil ne sont plus nécessaires.

Vous ne pouvez pas utiliser le boîtier de

protection si vous installez l'appareil

au-dessus d'un four.

DESCRIPTION DE L'APPAREIL

AGENCEMENT DE LA TABLE DE CUISSON

1 2

Zone de cuisson à induction 2300 W,

avec fonction Booster 3200 W

Zone de cuisson à induction 2300 W,

avec fonction Booster 3200 W

Zone de cuisson à induction 2300 W,

avec fonction Booster 3200 W

Bandeau de commande

2) L'enceinte de protection n'est pas disponible dans tous les pays. Veuillez contacter votre revendeur local.

18 electrolux

DESCRIPTION DU BANDEAU DE COMMANDE

1 2 3 4 5

12 11

6 7

Les touches sensitives permettent de commander l'appareil.

Touche sensitive Fonction

Mise en fonctionnement et à l'arrêt de la table de

cuisson

Activation et désactivation de la fonction de ver-

rouillage des touches ou de la Sécurité enfants

Activation de la fonction Booster

Voyants du minuteur des zones de

cuisson

Affichage de la zone à laquelle se réfère la durée

sélectionnée

Affichage du minuteur Affichage de la durée en minutes

Voyants du niveau de cuisson Affichage du niveau de cuisson

indique ce qui suit :

• absence d'ustensile sur la zone de cuisson

• le récipient de cuisson n'est pas adapté

• l'arrêt de sécurité est activé

Affichage indiquant que la zone de cuisson est en-

core chaude

bandeau de commande Pour régler le niveau de cuisson

Augmentation ou diminution de la durée

Sélection d'une zone de cuisson

Activation et désactivation de la fonction STOP

+GO

+ un chiffre dans l'affichage du mi-

nuteur, indique une anomalie de fonc-

tionnement.

VOYANT DE CHALEUR RÉSIDUELLE

Avertissement La chaleur

résiduelle peut être source de brûlures !

Les zones de cuisson à induction génèrent

la chaleur nécessaire directement sur le

fond des plats de cuisson. La chaleur rési-

duelle des plats de cuisson suffit pour

chauffer légèrement la table vitrocéramique.

electrolux 19

NOTICE D'UTILISATION

MISE EN FONCTIONNEMENT ET MISE

À L'ARRÊT

Appuyez sur

pendant 1 seconde pour

mettre l'appareil en fonctionnement ou à

l'arrêt.

DISPOSITIF D'ARRÊT DE SÉCURITÉ

La table de cuisson est

automatiquement mise à l'arrêt si :

• toutes les zones de cuisson sont mises à

l'arrêt.

• vous ne réglez pas le niveau de cuisson

après la mise en fonctionnement de la ta-

ble de cuisson.

• vous avez posé un objet (casserole, chif-

fon, etc.) sur une touche sensitive pen-

dant plus de 10 secondes. Un signal so-

nore retentira tant que vous n'aurez pas

enlevé l'objet.

• en cas de surchauffe (par ex. une casse-

role brûle sur le feu). Avant de réutiliser la

table de cuisson, laissez refroidir la zone

de cuisson.

• vous utilisez des récipients qui ne sont

pas adaptés.

s'allume et, 2 minutes

après, la zone de cuisson est automati-

quement mise à l'arrêt.

• vous n'avez pas mis à l'arrêt une zone de

cuisson ou modifié le niveau de cuisson.

Après un certain temps

s'allume et la

table de cuisson se met à l'arrêt. Voir ta-

bleau.

Durée du dispositif d'arrêt de sécurité

Niveau de cuis-

son

1-2 3-4 5 6-9

Se met à l'arrêt

après

6 heures 5 heures 4 heures 1,5 heure

NIVEAU DE CUISSON

Appuyez sur le bandeau de commande sur

le niveau de cuisson souhaité. Les voyants

du niveau de cuisson s'allument.

FONCTION DE DÉMARRAGE

AUTOMATIQUE DE LA CUISSON

Avec la fonction de démarrage automati-

que, la zone de cuisson est chauffée à la

puissance maximale pendant un certain

temps puis passe automatiquement au ni-

veau de cuisson souhaité.

Appuyez sur

. Le voyant clignote. Réglez

le niveau de cuisson (de 1 à 8). Le voyant

du niveau de cuisson s'allume. Le voyant

situé au dessus de s'allume et s'éteint

au bout d'un certain temps.

La durée de fonctionnement de la cuisson

automatique dépend du niveau de cuisson

sélectionné.

123456789

ACTIVATION/DÉSACTIVATION DE LA

FONCTION BOOSTER

La fonction Booster vous permet d'aug-

menter la puissance des zones de cuisson

à induction. La fonction Booster est activée

pendant une durée maximum de 10 minu-

20 electrolux

Sidan laddas ...

Electrolux EHD90230P Användarmanual

varumärke: Electrolux

Modell: EHD90230P

Kategori: Kokplattor

Typ: Användarmanual

Ladda ner pdf

Rapportera

på andra språk

español: Electrolux EHD90230P Manual de usuario
français: Electrolux EHD90230P Manuel utilisateur
English: Electrolux EHD90230P User manual
dansk: Electrolux EHD90230P Brugermanual

Electrolux EHD90230P Användarmanual

Electrolux EHD90230P Användarmanual

på andra språk

Relaterade papper

Andra dokument