Yamaha YAS-209BL Användarmanual

Front Surround System

Owner’s Manual

EN

• Read the supplied booklet “Safety Brochure” before using the unit.

CONTENTS

INTRODUCTION 4

BEFORE USING THE UNIT 6

Features.............................................................6

Accessories.........................................................9

Using the remote control......................................9

Part names and functions....................................11

PREPARATION 17

1 Installation.. ................................................ 17

Installing the unit.. .............................................................................................. 17

2 Connecting a TV.. .......................................... 18

Connecting a TV that supports Audio Return Channel (ARC)............................ 18

Connecting a TV that does not support Audio Return Channel (ARC).............. 19

3 Connecting AV devices.. ................................. 19

HDMI connection with an AV device................................................................... 19

4 Connecting to power......................................20

Connecting to power........................................................................................... 20

5 Connecting to a network................................20

Network functions................................................................................................20

Wired network connections.................................................................................21

Wireless network connections.. ..........................................................................21

Connecting to a network with the Sound Bar Controller app.. .........................22

PLAYBACK 23

Basic operations.. .............................................. 23

Basic procedure for playback..............................................................................23

Operating the unit using voice commands (Amazon Alexa)..............................25

Enjoying your favorite sound...............................28

Playback with 3D surround sound/surround sound.. ........................................28

Selecting a surround mode.. ...............................................................................28

Playback with 2-channel stereo sound...............................................................28

Playback of human voices clearly (Clear Voice).. ...............................................29

Enjoying enhanced bass sound (Bass Extension)...............................................29

Using a Bluetooth® device.. ................................. 30

Listening to audio from a Bluetooth® device......................................................30

Useful features for playback................................32

Using a TV’s remote control to operate the unit (HDMI control).. .....................32

Showing audio information and function settings.. ..........................................33

En

2

Playing audio content using the Sound Bar

Controller app...................................................34

Streaming services.............................................................................................. 34

Playing audio content on your mobile device.. ................................................. 34

CONFIGURATIONS 35

Configuring various functions..............................35

Changing the brightness of the indicators (Dimmer)........................................ 35

Configuring the HDMI control function.............................................................. 36

Configuring HDMI audio output.. ....................................................................... 37

Setting the auto power standby function.......................................................... 38

Enabling/disabling touch panel control (Child Lock function)......................... 39

Enabling/disabling the network standby function............................................ 40

Enabling/disabling the wireless (Wi-Fi) function............................................... 41

Enabling/disabling the Bluetooth function.. ..................................................... 41

Updating the unit’s firmware.. ........................................................................... 42

Pairing the center unit and subwoofer manually.............................................. 42

Selecting the HDMI signal format....................................................................... 43

Initializing the unit.. ............................................................................................ 44

Setting the dynamic range compression.. ......................................................... 44

APPENDIX 46

When any problem occurs (General)......................46

When any problem occurs (Power and system

function)...........................................................46

When any problem occurs (Audio).........................49

When any problem occurs (Bluetooth®).................51

When any problem occurs (Network trouble)......... 52

Specifications....................................................54

Center unit specifications....................................................................................54

Subwoofer specifications.. ..................................................................................56

Supported HDMI audio and video formats.. .......................................................57

Supported digital audio formats.........................................................................58

Information for qualified contractors or dealers.....59

Mounting the center unit on a wall.. ...................................................................59

En

3

INTRODUCTION

Information

Indicates notes on instructions, restrictions on functions, and additional

information that may be helpful.

About functions included in the unit

The services that can be used with this unit that are provided by third

parties may be changed, suspended, or ended without notice. Please be

aware that Yamaha Corporation does not bear any responsibility for

these services.

Trademarks

Manufactured under license from Dolby Laboratories. Dolby, Dolby Audio, Pro

Logic, and the double-D symbol are trademarks of Dolby Laboratories.

For DTS patents, see http://patents.dts.com.

Manufactured under license from DTS, Inc. DTS, the Symbol, DTS and the Symbol

together, DTS Digital Surround, and DTS Virtual:X are registered trademarks or

trademarks of DTS, Inc. in the United States and/or other countries.

Amazon, Alexa, Amazon Music, Kindle and all related logos are trademarks of

Amazon.com, Inc. or its affiliates.

App Store

SM

App Store is a service mark of Apple Inc.

The terms HDMI, the HDMI Logo, and High-Definition Multimedia Interface are

trademarks or registered trademarks of HDMI Licensing LLC in the United States

and other countries.

x.v.Color™

“x.v.Color” is a trademark of Sony Corporation.

Android™　Google Play™

Android and Google Play are trademarks of Google LLC.

The Wi-Fi CERTIFIED™ Logo is a certification mark of Wi-Fi Alliance®.

Wi-Fi and Wi-Fi CERTIFIED are registered trademarks of Wi-Fi Alliance®.

En

4

The Bluetooth® word mark and logos are registered trademarks owned by

Bluetooth SIG, Inc. and any use of such marks by Yamaha Corporation is under

license.

Spotify and Spotify logo are registered trademarks of the Spotify Group.

The Spotify Software is subject to third party licenses found here:

www.spotify.com/connect/third-party-licenses

Blu-ray™

“Blu-ray Disc™”, “Blu-ray™”, and the logos are trademarks of the Blu-ray Disc

Association.

About content in this manual

• This manual is for the following readers:

– the users of the unit

– the constructor, builder and dealer that mount the unit on the wall

• This manual uses the following signal words for the important

information:

–

WARNING

This content indicates “risk of serious injury or death.”

–

CAUTION

This content indicates “risk of injury.”

– n NOTICE

Indicates points that you must observe in order to prevent product

failure, damage or malfunction and data loss, as well as to protect

the environment.

– n NOTE

Indicates notes on instructions, restrictions on functions, and

additional information that may be helpful.

• The illustrations and screens in this manual are for instructional

purposes only.

• The company names and product names in this manual are the

trademarks or registered trademarks of their respective companies.

• Software may be revised and updated without prior notice.

• In this manual, iOS and Android mobile devices are collectively

referred to as “mobile devices”. The specific type of mobile device is

noted in explanations as needed.

En

5

BEFORE USING THE UNIT

Features

Introduction

This unit is a front surround system that allows for the enjoyment of superior sound quality from video played on a TV connected to the unit.

n

Play surround sound

Audio from a TV, media

streaming service, or BD/

DVD player can be played

with 3D surround sound/

surround sound.

n

Ask Alexa to control the unit

Alexa, turn up the volume.

Alexa, switch the input source to HDMI.

With Alexa built-in, you can

operate this unit, access

your music playlists.

Alexa may not be available in your region.

View the Yamaha product website for

details.

En

6

n

Easy operation using the smartphone app

Sound Bar Controller

Install the Sound Bar

Controller app on

either a smartphone

or tablet. Various

features and settings

can be easily accessed

and controlled via the

app.

n

Listen to audio from Bluetooth devices and streaming

services

Bluetooth devices

Streaming services

*

A subscription may be required to listen

to streaming services via this unit.

Enjoy listening to audio

from Bluetooth devices

and streaming services*

such as Amazon Music and

Spotify.

En

7

3D surround playback

This unit supports virtual 3D surround sound technology called “DTS

Virtual:X”. Surround sound can be heard not only from horizontal

directions, but also from varying heights when this unit’s 3D surround

mode is enabled, creating a virtual acoustic environment. This ultimately

provides an immersive audio and sound experience by creating a sense

of sounds not only coming from behind, but also above the listener. For

details, see the following:

• “Playback with 3D surround sound/surround sound”(p.28)

Wireless subwoofer

The supplied wireless subwoofer enables more dynamic audio playback.

Transmission of 4K high dynamic range

(HDR) video

Enjoy 4K High Dynamic Range (HDR) content from HDR-compatible

sources such as a TV, media streaming device, gaming console, or set-top

box. For details, see the following:

• “Supported HDMI audio and video formats”(p.57)

HDMI control function

Link functions of a TV and the unit are available using the TV’s remote

control. When a TV that supports Audio Return Channel (ARC) is used,

this ARC-compatible unit can be connected to the TV via a single HDMI

cable. For details, see the following:

• “Using a TV’s remote control to operate the unit (HDMI

control)”(p.32)

• “Connecting a TV that supports Audio Return Channel (ARC)”(p.18)

Bass Extension

The bass extension feature boosts bass levels for more impactful sound.

For details, see the following:

• “Enjoying enhanced bass sound (Bass Extension)”(p.29)

Clear Voice

The clear voice function makes speech, such as dialog and narration,

clearer. For details, see the following:

• “Playback of human voices clearly (Clear Voice)”(p.29)

En

8

Accessories

Checking the accessories

Make sure you have received all of the following accessories.

Power cord x 2

The unit (YAS-CU209)

Remote control

Optical digital audio cable

Mounting template

In this manual, the wireless subwoofer

is referred to as the “subwoofer”.

Quick Start Guide Safety Brochure

A CR2025 Lithium battery

has already been inserted

into the remote control.

Wireless subwoofer

(NS-WSW44)

Use when mounting the center unit on a wall.

In this manual, the unit may also be

referred to as the “center unit”.

Using the remote control

Preparing the remote control

Remove the battery insulating strip before attempting to use the remote

control.

Battery insulating strip

Operating range of the remote control

Operate the remote control within the range shown in the following

figure.

Remote control

sensor

Within 6 m (20 ft)

En

9

Replacing the battery in the remote

control

WARNING

• DO NOT SWALLOW THE BATTERY.

• Keep new and used batteries away from children.

• If the battery compartment does not close securely, stop using the product and

keep it away from children.

The remote control supplied with this product contains a coin/button cell battery.

If the coin/button cell battery is swallowed, it can cause severe internal burns in

just two hours and can eventually lead to death. If you think a battery might have

been swallowed or placed inside any part of the body, seek immediate medical

attention.

CAUTION

• Do not put in a pocket or bag, carry, or store batteries together with pieces of

metal.

The battery could short, burst, or leak, causing a fire or injury.

• When storing or discarding batteries, insulate the terminal area by applying tape, or

some other protection.

Mixing them with other batteries or metal objects can cause a fire, burns, or

inflammation due to fluid.

Press and hold ▽ on the rear cover of the remote control, slide the cover

out in the direction indicated [1], and replace the old battery with a new

one [2]. Slide the rear cover back into place in the direction indicated

[3].

CR2025

+

[1]

[2]

[3]

[1]

[2]

[3]

Rear cover

CR2025 Lithium battery

En

10

Part names and functions

Part names and functions of the front/top panel

The part names and functions of the front and top panels are as follows.

i

b c d e fa

h

g

a Indicators

The indicators on the top panel flash or glow to

show the operation and setting status. In this

manual, indicator status, such as off, glowing,

and flashing, are shown as the illustrations

below.

Off

Glows

Flashes

b ) (Alexa)

Manually wake Alexa to enable a voice

command (p.25).

c ) (Microphones disabled)

Touch to disable the microphones. Alexa will

not respond to utterances while the

microphones are disabled. Disable the

microphones to maintain privacy. Touch again

to enable the microphones (p.25).

d y (input)

Select an input source (p.23).

e } / { (volume +/-)

Adjust the volume (p.23).

f z (power)

Turn on or off the unit.

g Microphones

Used to interact with Alexa.

n NOTICE

• Do not use a vacuum cleaner or aerosol air duster

on the microphones when cleaning the unit. Doing

so may damage the microphones.

h Speakers

En

11

i Remote control sensor

Receives infrared (IR) signals from the remote

control of the unit (p.9).

n NOTE

• b, c, d, e and f are touch sensors. Touch icons

with your finger to control functions.

• Do not place any objects on the touch panel as doing

so may result in unintended operations.

• When touch panel control is disabled, no operations

can be performed using the unit’s touch panel. This

prevents accidental operation of the unit. For details,

see the following:

– “Enabling/disabling touch panel control (Child Lock

function)”(p.39)

• The brightness of the indicators can be changed using

MUSIC on the remote control. For details, see the

following:

– “Changing the brightness of the indicators

(Dimmer)”(p.35)

En

12

Part names and functions of the rear panel

The part names and functions of the rear panel are as follows.

a e

b

c

d f

a Power connector

Connect the power cord (p.20).

b HDMI IN jack

For connecting to an HDMI-compatible AV

device, such as a BD/DVD player, a satellite and

cable TV tuner, and a game console, and

inputting video/audio signals (p.19).

c HDMI OUT (ARC) jack

For connecting to an HDMI-compatible TV and

outputting video/audio signals (p.18). When a

TV that supports Audio Return Channel (ARC) is

used, TV audio signals can also be input through

this jack.

d NETWORK jack

For connecting to an ethernet cable (sold

separately) (p.21).

e TV input jack

For connecting to a TV that does not support

ARC. This jack cannot be used when the unit is

connected to an ARC-compatible TV (p.19).

f UPDATE ONLY jack

Use to update this unit’s firmware, if necessary.

The jack is located inside the cover.

Refer to the instructions supplied with the

firmware for details.

En

13

Part names and functions of the subwoofer

The part names and functions of the subwoofer are as follows.

a

e

b

c d

Front panel

Rear panel

a Bass reflex port

b PAIRING button

Use to pair the center unit with the subwoofer

manually (p.42).

c STANDBY indicator

Shows subwoofer’s status (p.15).

d * indicator

Glows when the center unit and subwoofer are

connected wirelessly.

e Power connector

Connect the power cord (p.20).

En

14

Part names and functions of the remote control

The part names and functions of the supplied remote control are as follows.

z

|

HDMI

MOVIE TV MUSIC

SPORTS

SUBWOOFER VOLUME

INFO

BASS

EXT

GAME STEREO

CLEAR VOICE

3D SURROUND

TV

BLUETOOTH

NET

a

b

c

d

e

f

g

h

i

j

k

l

a @ (Alexa) button

Manually wake Alexa to enable a voice

command (p.25).

b Input buttons

Select an input source to be played back.

• HDMI : Sound from a device connected to the

HDMI IN jack (p.19)

• TV : TV audio (p.18)

• BLUETOOTH : Sound from a Bluetooth device

(p.30)

• NET : Audio from streaming services (p.34)

c CLEAR VOICE button

Enable/disable the clear voice function (p.29).

d Surround mode buttons

Select a surround mode for 3D surround or

surround playback according to your individual

preference (p.28).

• MOVIE

• TV

• MUSIC

• SPORTS

• GAME

e BASS EXT button

Enable/disable the bass extension function

(p.29).

f SUBWOOFER (+/-) button

Adjust the volume of the subwoofer (p.23).

g | (mute) button

Mute the audio output (p.23). Press the button

again to unmute or press VOLUME (+/-).

h z (power) button

Turn on/off the unit.

Center unit

Turned on

Off

Turned off/network standby（p.40）

Glows (red)

Turned off/Voice Control Ready (p.25)

Glows (white)

Subwoofer

Turned on

Off

Glows (green)

Turned off/network standby (p.40)

Glows (red)

En

15

i 3D SURROUND button

Switch between 3D surround playback and

surround playback each time the button is

pressed (p.28).

j STEREO button

Switch to stereo (2-channel) playback (p.28).

k VOLUME (+/-) button

Adjust the volume of the unit (p.23).

l INFO button

Confirm the type of audio signal being played,

as well as settings for functions (p.33).

En

16

PREPARATION

1 Installation

Installing the unit

Install the unit as shown in the following illustration.

Install the subwoofer externally of the center unit. To prevent sound

from reflecting off of walls, angle the subwoofer slightly toward the

center of the room.

Touch panel

n NOTICE

• Do not stack the center unit and any other device directly on each other. Doing so

may cause a malfunction due to vibrations.

• Do not apply excessive force to the unit when moving it. Doing so may damage the

speakers or the portion covered with fabric.

• Avoid the following when installing the subwoofer to prevent any loss in sound

volume.

– Installing the subwoofer so that the speaker (portion covered with fabric) is too

close to a wall.

– Covering the subwoofer’s bass reflex port.

• The subwoofer can only be used in its upright position. Do not position the

subwoofer on its side.

• The unit contains non-magnetic shielding speakers. Do not place magnetically

sensitive items (hard disk drive, etc.) near the unit.

• Do not place objects such as metallic furniture between the center unit and the

subwoofer as such objects may interfere with wireless communication.

n NOTE

The center unit can also be mounted on a wall. For details, see the following:

• “Mounting the center unit on a wall”(p.59)

En

17

2 Connecting a TV

Connecting a TV that supports Audio

Return Channel (ARC)

Connect the TV, which supports Audio Return Channel (ARC), to the unit

with an HDMI cable (sold separately).

HDMI

(ARC)

HDMIHDMI

HDMI OUT (ARC) jack

Center unit (rear)

HDMI input jack

TV

n What is Audio Return Channel (ARC)?

In order for the unit to play audio from a TV, the TV must usually be connected to the

unit via an audio cable as well as an HDMI cable. If, however, the TV supports Audio

Return Channel (ARC), TV audio signals can be input to the unit via the HDMI cable that

outputs video signals from the unit to the TV.

n NOTE

• Connect an HDMI cable to the audio return channel supported jack (the jack with

“ARC” indicated) on TV.

• Enable the HDMI control function of the unit to activate the Audio Return Channel

(ARC). For details, see the following:

– “Configuring the HDMI control function”(p.36)

• Use a 19-pin HDMI cable with the HDMI logo printed on it.

• Keep the cable as short as possible to prevent any degradation in signal quality.

• Use a premium high-speed HDMI cable for playback of 3D and 4K video content.

• The TV input jack cannot be used when a TV that supports the Audio Return Channel is

connected to the unit.

En

18

Connecting a TV that does not support

Audio Return Channel (ARC)

Connect the TV to the unit with an HDMI cable (sold separately) and an

optical digital audio cable (supplied).

OPTICAL

HDMI

OO OO

HDMI

HDMIHDMI

HDMI OUT (ARC) jack

Center unit

(rear)

TV jack

Audio output jack

(digital optical)

HDMI input jack

TV

Remove the cap.1. 2. Check the plug’s

orientation.

n NOTE

• Use a 19-pin HDMI cable with the HDMI logo printed on it.

• Keep the cable as short as possible to prevent any degradation in signal quality.

• Use a premium high-speed HDMI cable for playback of 3D and 4K video content.

3 Connecting AV devices

HDMI connection with an AV device

Connect an AV device such as a media streaming device to the unit with

an HDMI cable (sold separately).

HDMI

HDMIHDMI

HDMI IN jack

Center unit (rear)

HDMI output jack

AV device

n NOTE

• Once the HDMI control function has been activated, video and audio signals from AV

devices can be output from the TV even when the unit is turned off (HDMI signal pass-

through). For details, see the following:

– “Configuring the HDMI control function”(p.36)

• Use a 19-pin HDMI cable with the HDMI logo printed on it.

• Keep the cable as short as possible to prevent any degradation in signal quality.

• Use a premium high-speed HDMI cable for playback of 3D and 4K video content.

En

19

4 Connecting to power

Connecting to power

Once all connections have been made, connect the unit to power as

shown in the following illustration.

Rear

To an AC wall outlet

Power cord (supplied)

Once all connections have been made, connect the subwoofer to power

as shown in the following illustration.

Rear

To an AC wall outlet

Power cord (supplied)

5 Connecting to a network

Network functions

A network connection allows you to play various streaming services via

the unit, and to talk with Amazon Alexa to operate this unit, or to play

music.

The Sound Bar Controller app for mobile devices is required to configure

and operate network functions.

n NOTICE

• Do not connect this product to public Wi-Fi or Internet directly. Only connect this

product to the Internet through a router with strong password-protections. Consult

your router manufacturer for information on security best practices.

n NOTE

• To use network function, the unit and mobile device must be connected to the same

router.

• When using a multiple SSID router, access to the unit might be restricted depending on

the SSID to connect. Connect the unit and mobile device to the same SSID.

• Some security software installed on your computer, or network device settings (such

as a firewall), may block the unit’s access to streaming services. Should this occur,

change security software and/or network device settings.

• A network connection cannot be established if the MAC address filter on your router is

enabled. Check your router’s settings.

• To configure your router’s subnet mask manually, apply the same subnet used by this

unit to all devices.

• Use of a broadband connection is recommended when using Internet services.

• The unit cannot be connected to a network that requires manual setup. Connect the

unit to a DHCP enabled router.

En

20

Sidan laddas ...

Yamaha YAS-209BL Användarmanual

Denna manual är också lämplig för

Yamaha YAS-209BL Användarmanual

på andra språk

Relaterade papper

Andra dokument