Yamaha DVDC900 Användarmanual
- Kategori
- DVD-spelare
- Typ
- Användarmanual
Denna manual är också lämplig för
OWNER’S MANUAL
MODE D’EMPLOI
NATURAL SOUND DVD PLAYER
LECTEUR DVD
U
NATURAL SOUND DVD PLAYER DVD
-
C900
POWER
PLAYXCHANGE
OPEN/CLOSE
SKIP/
SEARCH
/
DVD
/
VIDEO CD
/
CD
AUTO
DISPLAY OFF
12345
DISC
1 Read Instructions – All the safety and operating instructions
should be read before the appliance is operated.
2 Retain Instructions – The safety and operating instructions
should be retained for future reference.
3 Heed Warnings – All warnings on the appliance and in the
operating instructions should be adhered to.
4 Follow Instructions – All operating and use instructions should
be followed.
5 Cleaning — Unplug this video product from the wall outlet
before cleaning. Do not use liquid cleaners or aerosol
cleaners. Use a damp cloth for cleaning.
Exception: A product that is meant for uninterrupted service
and that for some specific reason, such as the possibility of
the loss of an authorization code for a CATV converter, is not
intended to be unplugged by the user for cleaning or any
other purpose, may exclude the reference to unplugging the
appliance in the cleaning description otherwise required in
item 5.
6 Attachments — Do not use attachments not recommended by
the video product manufacturer as they may cause hazards.
7 Water and Moisture – Do not use this video product near
water – for example, near a bathtub, washbowl, kitchen sink,
laundry tub, in a wet basement, or near a swimming pool, and
the like.
8 Accessories — Do not place this video product on an unstable
cart, stand, tripod, bracket, or table. The video product may
fall, causing serious injury to a child or adult, and serious
damage to the appliance. Use only with a cart, stand, tripod,
bracket, or table recommended by the manufacturer, or sold
with the video product. Any mounting of the appliance should
follow the manufacturer’s instructions, and should use a
mounting accessory recommended
by the manufacturer.
8A An appliance and cart combination
should be moved with care. Quick
stops, excessive force, and uneven
surfaces may cause the appliance
and cart combination to overturn.
9 Ventilation — Slots and openings in the cabinet are provided
for ventilation and to ensure reliable operation of the video
product and to protect it from overheating, and these
openings must not be blocked or covered. The openings
should never be blocked by placing the video product on a
bed, sofa, rug, or other similar surface. This video product
should never be placed near or over a radiator or heat
register. This video product should not be placed in a built-in
installation such as a bookcase or rack unless proper
ventilation is provided or the manufacturer’s instructions have
been adhered to.
10 Power Sources — This video product should be operated only
from the type of power source indicated on the marking label.
If you are not sure of the type of power supply to your home,
consult your appliance dealer or local power company. For
video products intended to operate from battery power, or
other sources, refer to the operating instructions.
11 Grounding or Polarization — This video product is equipped
with a polarized alternating-current line plug (a plug having
one blade wider than the other). This plug will fit into the
power outlet only one way. This is a safety feature. If you are
unable to insert the plug fully into the outlet, try reversing the
plug. If the plug should still fail to fit, contact your electrician to
replace your obsolete outlet. Do not defeat the safety purpose
of the polarized plug.
Alternate Warnings —This video product is equipped with a 3-
wire grounding-type plug, a plug having a third (grounding)
pin. This plug will only fit into a grounding-type power outlet.
This is a safety feature. If you are unable to insert the plug
into the outlet, contact your electrician to replace your
obsolete outlet. Do not defeat the safety purpose of the
grounding-type plug.
12 Power-Cord Protection – Power-supply cords should be
routed so that they are not likely to be walked on or pinched
by items placed upon or against them, paying particular
attention to cords at plugs, convenience receptacles, and the
point where they exit from the appliance.
SAFETY INSTRUCTIONS
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK). NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead
symbol, within an equilateral triangle,
is intended to alert you to the
presence of uninsulated “dangerous
voltage” within the product’s
enclosure that may be of sufficient
magnitude to constitute a risk of
electric shock to persons.
The exclamation point within an
equilateral triangle is intended to alert
you to the presence of important
operating and maintenance
(servicing) instructions in the
literature accompanying the
appliance.
•
Explanation of Graphical Symbols
CAUTION
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN
OR MOISTURE.
IMPORTANT
Please record the serial number of your unit
in the space below.
Model:
Serial No.:
The serial number is located on the rear of
the unit.
Retain this Owner’s Manual in a safe place
for future reference.
English
1. IMPORTANT NOTICE : DO NOT MODIFY THIS UNIT!
This product, when installed as indicated in the
instructions contained in this manual, meets FCC
requirements. Modifications not expressly approved by
Yamaha may void your authority, granted by the FCC, to
use the product.
2. IMPORTANT : When connecting this product to
accessories and/or another product use only high quality
shielded cables. Cable/s supplied with this product
MUST be used. Follow all installation instructions.
Failure to follow instructions could void your FCC
authorization to use this product in the USA.
3. NOTE : This product has been tested and found to
comply with the requirements listed in FCC Regulations,
Part 15 for Class “B” digital devices. Compliance with
these requirements provides a reasonable level of
assurance that your use of this product in a residential
environment will not result in harmful interference with
other electronic devices.
This equipment generates/uses radio frequencies and, if
not installed and used according to the instructions
found in the users manual, may cause interference
harmful to the operation of other electronic devices.
Compliance with FCC regulations does not guarantee that
interference will not occur in all installations. If this product
is found to be the source of interference, which can be
determined by turning the unit “OFF” and “ON”, please try
to eliminate the problem by using one of the following
measures:
Relocate either this product or the device that is being
affected by the interference.
Utilize power outlets that are on different branch (circuit
breaker or fuse) circuits or install AC line filter/s.
In the case of radio or TV interference, relocate/reorient the
antenna. If the antenna lead-in is 300 ohm ribbon lead,
change the lead-in to coaxial type cable.
If these corrective measures do not produce satisfactory
results, please contact the local retailer authorized to
distribute this type of product. If you can not locate the
appropriate retailer, please contact Yamaha Electronics
Corp., U.S.A. 6660 Orangethorpe Ave, Buena Park, CA
90620.
The above statements apply ONLY to those products
distributed by Yamaha Corporation of America or its
subsidiaries.
FCC INFORMATION (for US customers only)
13 Outdoor Antenna Grounding — If an outside antenna or cable
system is connected to the video product, be sure the
antenna or cable system is grounded so as to provide some
protection against voltage surges and built-up static charges.
Article 810 of the National Electrical Code, ANSI/NFPA No.
70, provides information with regard to proper grounding of
the mast and supporting structure, grounding of the lead-in
wire to an antenna discharge unit, size of grounding
conductors, location of antenna-discharge unit, connection to
grounding electrodes, and requirements for the grounding
electrode. See the figure below.
14 Lightning — For added protection for this video product
receiver during a lightning storm, or when it is left unattended
and unused for long periods of time, unplug it from the wall
outlet and disconnect the antenna or cable system. This will
prevent damage to the video product due to lightning and
power-line surges.
15 Power Lines — An outside antenna system should not be
located in the vicinity of overhead power lines or other electric
light or power circuits, or where it can fall into such power
lines or circuits. When installing an outside antenna system,
extreme care should be taken to keep from touching such
power lines or circuits as contact with them might be fatal.
16 Overloading — Do not overload wall outlets and extension
cords as this can result in a risk of fire or electric shock.
17 Object and Liquid Entry — Never push objects of any kind
into this video product through openings as they may touch
dangerous voltage points or short-out parts that could result
in a fire or electric shock. Never spill liquid of any kind on the
video product.
18 Servicing — Do not attempt to service this video product
yourself as opening or removing covers may expose you to
dangerous voltage or other hazards. Refer all servicing to
qualified service personnel.
19 Damage Requiring Service — Unplug this video product from
the wall outlet and refer servicing to qualified service
personnel under the following conditions:
a. When the power-supply cord or plug is damaged.
b. If liquid has been spilled, or objects have fallen into the
video product.
c. If the video product has been exposed to rain or water.
d. If the video product does not operate normally by following
the operating instructions. Adjust only those controls that
are covered by the operating instructions as an improper
adjustment of other controls may result in damage and will
often require extensive work by a qualified technician to
restore the video product to its normal operation.
e. If the video product has been dropped or the cabinet has
been damaged.
f. When the video product exhibits a distinct change in
performance — this indicates a need for service.
20 Replacement Parts — When replacement parts are required,
be sure the service technician has used replacement parts
specified by the manufacturer or have the same
characteristics as the original part. Unauthorized substitutions
may result in fire, electric shock or other hazards.
21 Safety Check — Upon completion of any service or repairs to
this video product, ask the service technician to perform
safety checks to determine that the video product is in proper
operating condition.
EXAMPLE OF ANTENNA GROUNDING
MAST
GROUND
CLAMP
ANTENNA
LEAD IN
WIRE
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810–20)
GROUNDING CONDUCTORS
(NEC SECTION 810–21)
GROUND CLAMPS
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250. PART H)
ELECTRIC
SERVICE
EQUIPMENT
NEC – NATIONAL ELECTRICAL CODE
Thank you for selecting this YAMAHA DVD player
CONTENTS
SAFETY INSTRUCTIONS ......Inside of the front cover
Features ....................................................................1
Caution ......................................................................2
Getting started ..........................................................4
Unpacking ..............................................................................4
Installing batteries in the remote controller ............................5
Notes about the remote controller ..........................................5
Names of parts and their functions ........................6
Connections .............................................................9
Speaker setup ........................................................................9
n Speaker configuration .....................................................9
n Placing speakers .............................................................9
Audio connections ................................................................10
n Connecting to an AV amplifier (or receiver) equipped with
a Dolby Digital, MPEG or DTS decoder, or connecting to
a Dolby Digital, MPEG or DTS decoder ........................10
n Connecting to an AV amplifier (or receiver) equipped
with 6 channel input terminals
<For China and General models only>.........................12
n Connecting to a stereo amplifier that has neither
6 channel audio signal input terminals nor Dolby Digital
decoder ..........................................................................13
Video connections ................................................................14
n Connecting to an amplifier equipped with an RCA type
video signal input terminal (including an S-video input
terminal) .........................................................................14
n Connecting to a TV equipped with component
video input terminals ......................................................15
Basic operation ......................................................16
Basic playback .....................................................................16
Playing back a preferred scene or track ...............................19
n Beginning playback from a preferred chapter (or track)
.......................................................................................19
n Skipping to a preferred chapter (or track) on the disc
(Skip search)..................................................................19
n Beginning playback from a preferred title (for DVDs)
or index number (for Video CDs/CDs)............................20
n Beginning playback from a preferred time point
on the disc......................................................................21
Other ways of playback ........................................................22
n To advance or reverse playback rapidly
(Rapid search)................................................................22
n To still picture (or suspend playback).............................22
n Frame advance [ and only].................................22
n To advance or reverse playback in a preferred speed
(Multi-speed playback) [ and only]......................23
n Operations unique for a Video CD in the Playback
Control mode [ only].................................................25
n Changing the audio output mode (to enjoy using a
multisound disc etc.) [ and only].........................26
Displaying various information ............................27
Switching the time display.....................................................27
On Screen Display ...............................................................29
Advanced operation ...............................................32
Repeat play ..........................................................................32
Repeat play between specified two points (A-B repeat play)
..............................................................................................33
Program play ........................................................................34
Random play ........................................................................37
Changing subtitle language [ only]..................................38
Changing audio sound track language [ only].................39
Using a title menu [ only].................................................40
Using a DVD menu [ only]...............................................41
Viewing from another angle [ only]..................................42
Initial settings (on the SET UP menu) ..................43
Items ....................................................................................43
Common procedure for setting change ................................44
Item description and setting change ....................................45
DVD Settings
1
TV Type .........................................................................45
2
Display Mode .................................................................46
3
Menu Language ............................................................47
4
Subtitle Language .........................................................48
5
Audio Language ............................................................49
6
Rating Level ..................................................................50
VCD Settings
1
Playback Control ...........................................................52
Display Settings
1
Guide Display ................................................................53
2
OSD Language ..............................................................54
3
Background Screen .......................................................55
4
Screen Saver .................................................................56
5
FL Dimmer .....................................................................57
6
Signal System Conversion [ and only]
<For China and General models only> ........................58
Audio Settings
1
Digital Output .................................................................59
2
Dynamic Range Control
<For China and General models only> ........................61
3
Speaker [ only]
<For China and General models only> ........................62
Appendix .................................................................64
Troubleshooting ...................................................................64
Definition of terms.................................................................66
Language code list ...............................................................67
Region management information .........................................68
Notes about handling discs ..................................................68
Specifications .......................................................................69
DVD
VCD
DVD
DVD
DVD
DVD
DVD
DVD
CD
VCD
VCD
VCD
DVD
VCD
DVD
1
English
●
5-Disc Carousel Auto-Changer (for
Playing DVDs, Video CDs and Compact
Discs)
●
Full Opening Disc Table for Changing
5 Discs at a Time
●
Compatible with Almost of All Utility
Functions of DVD Discs
●
PLAYXCHANGE; Disc Changing
Capability while Playing Another
●
Program Play
●
Random Play
●
Single Track/Full Disc Repeat Play and
A-B Repeat Play for Repeating a Section
between Two Specified Points
●
Multi-Speed Playback Capability
●
On Screen Display Function (Displays
This Unit’s Operation Status and Disc
Information on the TV Monitor)
●
SET UP Menu Which Provides You with
Various Changeable or Adjustable Items
for Using This Unit in the Most Suitable
Condition
●
1 OPTICAL and 1 COAXIAL Digital
Terminals to Output Digital Audio Signals
Encoded with Dolby Digital, DTS, MPEG
or Linear PCM
●
S VIDEO and COMPONENT VIDEO
Outputs for High-Quality Picture
Reproduction
●
Remote Control Capability
China and General models only
●
Built-in Dolby Digital Decoder to Provide
You with High-quality 5.1-channel
Surround Sound of Sources Encoded
with Dolby Digital
Features
About the symbols used in this manual
A section whose title has one of the following symbols is
applicable only to the disc represented by the symbol.
.............DVD
.............Video CD
.............CD
* A section with no symbol is applicable to all discs.
DVD
VCD
CD
Manufactured under license from Dolby Laboratories.
“Dolby” and the double-D symbol are trademarks of Dolby
Laboratories. Confidential Unpublished Works.
1992–1997 Dolby Laboratories, Inc. All rights reserved.
2
1 To ensure the finest performance, please read this manual
carefully. Keep it in a safe place for future reference.
2 The voltage to be used must be the same as that specified
on this unit. Using this unit with a higher voltage than that
which is specified is dangerous and may result in a fire or
other type of accident causing damage. YAMAHA will not
be held responsible for any damage resulting from use of
this unit with a voltage other than that which is specified.
3 Install your unit in a cool, dry, clean place – away from
windows, heat sources, and too much vibration, dust,
moisture or cold. Avoid sources of hum (transformers,
motors). To prevent fire or electrical shock, do not expose
to rain or water.
4 This unit should not be placed on appliances, such as
amplifiers, that produce heat, or placed in a cabinet that
impedes the flow of air. This may result in a failure in this
unit. Install this unit in a well ventilated place. In addition, do
not place objects on this unit.
5 The generated digital signals may interfere with other
equipment such as tuners or receivers. Move the system
farther away from such equipment if interference is
observed.
6 Sudden temperature changes and storage or operation in
an extremely humid environment may cause condensation
inside the cabinet.
Condensation can cause the unit to malfunction.
To eliminate condensation, leave the power on with no disc
in the unit until normal playback becomes possible (about 1
hour).
7 Do not operate the unit upside-down. It may overheat,
possibly causing damage.
8 Never open the cabinet. If a foreign object drops into the
unit, contact your dealer.
9 To prevent lightning damage, unplug the power cord and
remove the antenna cable during electrical storms.
10Do not attempt to clean the unit with chemical solvents; this
might damage the finish. Use a clean, dry cloth.
11Do not use force on switches, knobs or cords. When
moving the set, first turn the unit off. Then gently
disconnect the power plug and the cords connecting to
other equipment. Never pull the cord itself.
12Always set the volume control on the amplifier to minimum
before starting a disc play: increase the volume gradually to
an appropriate level after play has started.
13Be sure to read the “TROUBLESHOOTING” section on
common operating errors before concluding that your unit is
faulty.
This unit can play discs of the following types only.
Video CDs are classified into two types, version 1.1 and 2.0. This unit can play not only discs of version 1.1, but also version
2.0 on which a Playback Control can be made.
Never attempt to play back a disc other than above with this unit because it may cause a damage to this unit and/or other units
connected to this unit.
Examples of disc types which this unit cannot play back:
CD-R, CD-EXTRA, CD-ROM, CD-G, PHOTO CD, DVD-ROM, VSD, CDV, etc.
Note
DVDs and Video CDs can only utilize the features with which they were designed by the software creators. Depending
on the contents of each disc, some operations described in this manual may become inoperative. Be sure to refer to
the instruction for each respective disc.
Type of disc
DVD
Video CD
CD
Mark printed
on the disc
Type of signal
recorded
Sound
+
Picture (Movie)
Sound
+
Picture (Movie)
Sound only
Size (Dimension)
12 cm
8 cm (Single type)
12 cm
8 cm (Single type)
12 cm
8 cm (Single type)
Maximum possible
play time
Approx. 4 hours (One side only)
Approx. 8 hours (Both sides)
Approx. 80 minutes (One side only)
Approx. 160 minutes (Both sides)
74 minutes
20 minutes
74 minutes
20 minutes
Caution: Read this before operating your unit.
3
English
Caution
To prevent a malfunction of this unit:
● Do not use any nonstandard shaped
disc (heart etc.) available on the
market, because it may damage the
unit.
● Do not use a disc with tape, seals, or paste on it, because
damage to the unit may result.
Some nonstandard discs are available on the market though
they look the same as the standard ones. This unit may not
be able to play back such discs in the ways described on this
owner’s manual.
This unit is designed for home use only. Do not use this
unit for business purposes.
Be sure to place this unit on a level surface. If not so, this
unit will fail to work normally at the PLAYXCHANGE operation
and cause damage to the disc(s) and this unit itself.
Caution for moving this unit
● When moving this unit, first remove all discs from the disc
table and close the table by pressing the OPEN/CLOSE
button, and then switch off the power after you confirm
that the front panel display indicates as follows.
Never switch off the power if the front panel display is not
pictured as above, otherwise the unit will break down
during moving because the internal mechanism is not
locked.
● Be sure not to lift or tip the unit with discs remaining in it.
FOR CANADIAN CUSTOMERS
TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE
OF PLUG TO WIDE SLOT AND FULLY INSERT.
THIS CLASS B DIGITAL APPARATUS MEETS ALL
REQUIREMENTS OF THE CANADIAN INTERFERENCE-
CAUSING EQUIPMENT REGULATIONS.
WARNING
To reduce the risk of fire or electric shock, do not expose this
unit to rain or moisture.
To avoid electrical shock, do not open the cabinet. Refer
servicing to qualified personnel only.
DANGER
Invisible laser radiation when open and interlock failed or
defeated.
Avoid direct exposure to beam.
CAUTION
DVD/VIDEO CD/CD PLAYER IS A CLASS 1 LASER
PRODUCT. HOWEVER THIS DVD/VIDEO CD/CD
PLAYER USES A VISIBLE LASER BEAM WHICH
COULD CAUSE HAZARDOUS RADIATION EXPOSURE
IF DIRECTED. BE SURE TO OPERATE THE DVD/VIDEO
CD/CD PLAYER CORRECTLY AS INSTRUCTED.
WHEN THIS DVD/VIDEO CD/CD PLAYER IS PLUGGED
TO THE WALL OUTLET, DO NOT PLACE YOUR EYES
CLOSE TO THE OPENING OF THE DISC TRAY AND
OTHER OPENINGS TO LOOK INTO THE INSIDE OF
THIS PLAYER.
USE OF CONTROLS OR ADJUSTMENTS OR
PERFORMANCE OF PROCEDURES OTHER THAN
THOSE SPECIFIED HEREIN MAY RESULT IN
HAZARDOUS RADIATION EXPOSURE.
DO NOT OPEN COVERS AND DO NOT REPAIR
YOURSELF. REFER SERVICING TO QUALIFIED
PERSONNEL.
Laser component in this product is capable of emitting
radiation exceeding the limit for Class 1.
DISC
1
(Inside of product)
YAMAHA and the Electronic Industries Association’s
Consumer Electronics Group want you to get the most out of
your equipment by playing it at a safe level. One that lets the
sound come through loud and clear without annoying blaring or
distortion – and, most importantly, without affecting your
sensitive hearing.
Since hearing damage from loud sounds is often
undetectable until it is too late, YAMAHA and the
Electronic Industries Association’s Consumer
Electronics Group recommend you to avoid
prolonged exposure from excessive volume levels.
We Want You Listening For A Lifetime
4
Unpacking
Carefully take this unit and accessories out of the box. You should find the unit itself and the following accessories.
Remote controller Batteries (size AA, R6, UM-3)
Audio/Video connection cord
12345
6
+10
7890
A
-
BS
/
FCANCEL
ANGLE
SELECT
TITLE AUDIO
MENU
SUBTITLE
SET UP
ON SCREEN
OFF
/
ON
MULTI SPEED
RETURN
TITLE
/
INDEX
REPEAT
DISC SKIP
PROG
RANDOM
DISC MODE
TIME
OPEN
/
CLOSE
STOP
STILL
/
PAUSE
SKIP/SEARCH
PLAY
Getting started
5
English
Getting started
Installing batteries in the remote
controller
Since the remote controller will be used for many of this unit’s
control operations, you should begin by installing the supplied
batteries.
1. Turn the remote controller over and slide the battery
compartment cover in the direction of the arrow.
2. Insert the batteries (R6, AA, UM-3 type) according to the
polarity markings on the inside of the battery compartment.
3. Close the battery compartment cover.
Notes about the remote controller
Battery replacement
If you find that the remote controller must be used closer to the
main unit, the batteries are weak. Replace both batteries with
new ones.
Notes
●
Use only AA, R6, UM-3 batteries.
●
Be sure the polarities are correct. (See the illustration
inside the battery compartment.)
●
Remove the batteries if the remote controller is not used for
an extended period of time.
●
If batteries leak, dispose of them immediately. Avoid
touching the leaked material and contact with clothing, etc.
Clean the battery compartment thoroughly before installing
new batteries.
Remote controller operation range
Notes
●
The area between the remote controller and the main unit
must be clear of large obstacles.
●
Do not expose the remote control sensor to strong lighting,
in particular, an inverter type fluorescent lamp. Otherwise,
the remote controller may not work properly. If necessary,
position the main unit away from direct lighting.
1
3
2
DISC
30°
30°
Remote control
sensor
Within apprxoimately
6 m (19.7 feet)
6
Front panel
1 POWER switch (p. 16, 17)
Press this switch to turn on the power. Press this switch again
to turn off the power.
2 Disc table (p. 16)
Up to 5 discs can be loaded on the disc table. Five disc-setting
positions on the disc table are numbered from 1 to 5.
3 PLAYXCHANGE button (p. 18)
Press this button to open and close the disc table while playing
a disc. This function enables you to exchange discs other than
the one being played.
4 OPEN/CLOSE button (p. 16)
Opens and closes the disc table.
5 AUTO DISPLAY OFF Indicator (p. 57)
Lights up when “5 FL Dimmer” on the SET UP menu is set to
“OFF”.
6 Remote control sensor
Receives signals from the remote controller.
7 Display panel
See page 8.
8 DISC (1, 2, 3, 4, 5) buttons and indicators
(p. 16, 18, 34)
Pressing a button selects the corresponding number of disc.
The illumination of an indicator shows that the corresponding
number of tray has a disc which this unit can play back.
9 / (PLAY/PAUSE) button
(p. 16, 21, 22, 32, 34, 36, 37)
Pressing this button starts playback. If this button is pressed
during playback, playback is suspended or a picture is kept
still, and if this button is pressed again, normal playback
resumes.
Remote controller
See the pages in parenthesis for details regarding operation.
NATURAL SOUND DVD PLAYER DVD
-
C900
POWER
AUTO
DISPLAY OFF
12345
DISC
PLAYXCHANGE
OPEN/CLOSE
SKIP/
SEARCH
/
DVD
/
VIDEO CD
/
CD
12 34
A098765
12345
6
+10
7890
A
-
BS
/
FCANCEL
ANGLE
SELECT
TITLE AUDIO
MENU
SUBTITLE
SET UP
ON SCREEN
OFF
/
ON
MULTI SPEED
RETURN
TITLE
/
INDEX
REPEAT
DISC SKIP
PROG
RANDOM
DISC MODE
TIME
OPEN
/
CLOSE
STOP
STILL
/
PAUSE
SKIP/SEARCH
PLAY
J
B4
N
O
P
R
Q
X
W
V
U
T
S
C
D
F
G
H
I
0
A
E
KLM
Names of parts and their functions
7
English
Names of parts and their functions
0 SKIP/SEARCH buttons (p. 19, 22, 24, 25)
SKIP :
Press this button to locate the beginning of the next
chapter or next track.
SKIP :
Press this button to locate the beginning of the
currently playing chapter or track, or the previous
chapter or track.
SEARCH :
Press and hold this button to advance the playback
rapidly.
SEARCH :
Press and hold this button to reverse the playback
rapidly.
A STOP ( ) button (p. 17, 36, 37)
Stops playback.
B DISC SKIP button (p. 16, 34, 37)
Whenever this button is pressed, the selected disc changes.
C CANCEL button (p. 36)
Used to cancel some specific mode or setting of this unit. See
the pages for operating methods for details.
D Numeric buttons
(p. 17–21, 24, 34, 36, 40, 41, 44, 47, 50)
Used to select a title number, chapter number, track number,
etc.
E TITLE button (p. 40)
Press this button to display the title menu of a DVD disc on
the monitor screen. For a disc which has no title menu,
pressing this button is ineffective. For Video CDs and CDs,
pressing this button is ineffective.
F ANGLE button (p. 42)
Whenever pressed, the viewing angle of the picture changes.
This button is effective only for scenes (on a DVD) which have
some angles of view.
G MENU button (p. 41)
Press this button to display the DVD menu of a DVD disc on
the monitor screen. For a disc which has no DVD menu,
pressing this button is ineffective.
H SET UP button (p. 44)
Press this button to display the SET UP menu on the monitor
screen.
I ON SCREEN button (p. 29)
Press this button to turn on and off the OSD (On Screen
Display) screen on the TV monitor. It gives you information
about the current status of this unit and the selected disc.
J S/F REPEAT button (p. 32)
Whenever you press this button, repeat play mode changes.
The selected mode is shown on the front panel display for
single or full repeat. This button also allows you to turn off the
mode.
A/B REPEAT button (p. 33)
Makes this unit repeatedly play a section between 2 points (A
and B) you designate on the disc.
K DISC MODE button (p. 16, 37)
Changes the disc play mode between the single-disc play
mode and the all-disc play mode. In the single-disc play
mode, only a selected disc is played back. In the all-disc play
mode, all discs on the disc table are played back sequentially.
L TIME button (p. 27, 28, 34, 35)
Switches the time display mode.
M RANDOM button (p. 37)
Press this button to play back titles or tracks on a designated
disc or all discs on the disc table in a random order.
N PROG button (p. 34)
Used for programming titles, tracks or a mixture of them in
your desired order.
O TITLE/INDEX button (p. 20, 21)
Whenever you press this button, search mode changes. The
selected mode is shown on the monitor screen for title (or
index) search or time search. This button also allows you to
turn off the mode.
P RETURN button (p. 17, 25, 44, 62)
Press this button to show the previous menu on the monitor
screen.
Q AUDIO button
For DVDs (p. 39)
Changes the audio sound track language if the selected DVD
has two or more audio sound track languages.
For Video CDs and CDs (p. 26)
Changes the output mode of the audio signal output terminals.
Every time this button is pressed, the output mode changes to
“left channel only”, “right channel only”, “left and right
channels”, and repeated.
R /// (p. 17, 23, 40, 41, 44–62)
Move cursors or change selections on the monitor screen.
S SUBTITLE button (p. 38)
Changes the subtitle language if the selected DVD has two or
more subtitle languages.
T (SUBTITLE) OFF/ON button (p. 38)
Turns on and off the showing of subtitles on the monitor
screen.
U MULTI SPEED button (p. 23)
Makes this unit enter into the multi-speed mode during
playback. When this unit is stopped, pressing this button is
ineffective.
V SELECT button (p. 17, 40, 41, 44–62)
Activates the selected menu item or input value.
W PLAY button (p. 16, 21, 22, 32, 34, 36, 37)
Starts playback.
X STILL/PAUSE button (p. 21, 22)
Suspends playback temporarily or keep a picture still. Press
the PLAY or
/ button to return to the standard speed
playback.
8
Names of parts and their functions
Front panel display
1 PBC
Lights up when this unit is in the Playback Control mode for
playing a Video CD, version 2.0.
2 DVD
Lights up when the selected disc is a DVD.
3 PGM
Lights up when this unit is in the program play mode.
4 VCD
Lights up when the selected disc is a Video CD.
5 CD
Lights up when the selected disc is a compact disc.
6 RDM
Lights up when this unit is in the random play mode.
7
Lights up during playback.
8
Lights up while playback is paused.
9 PCM
Lights up when a source recorded in Linear PCM is played
back.
0 DOLBY DIGITAL
Lights up when a source encoded with Dolby Digital is played
back.
A MPEG
Lights up when a source encoded with MPEG 1 or MPEG 2 is
played back.
B DTS
Lights up when a source encoded with DTS is played back.
C DISC 1
Lights up when this unit is in the single-disc play mode.
DISC 5
Lights up when this unit is in the all-disc play mode.
D REP S
Lights up when this unit is in the single-repeat play mode.
REP F
Lights up when this unit is in the full-repeat play mode.
REP A B
Lights up or flashes when this unit is in the A-B repeat play
mode.
E Tray numbers with discs only light up.
The circle enclosing the currently selected tray number lights
up.
F TITLE
Lights up with the selected title number.
TRACK
Lights up with the selected track number.
G CHP
Lights up with the selected chapter number.
INDEX
Lights up with the selected index number.
H Shows a playing time, for example the elapsed time of a
playing chapter and the remaining time (REMAIN) of a
playing chapter.
DVD VCD CD
PBCPGMRDM
TRACK
TITLE
PCM
INDEX
CHP
DTS
TIME
DISC
REP
1
S
A
5
F
B
MPEG
TOTAL
REMAIN
DOLBY
DIGITAL
234 56 7 89 0 AB C D
EF G H
1
9
English
Speaker setup
We recommend you to set up a multi-speaker system to enjoy the 5.1 channel surround sound of sources encoded with Dolby
Digital, MPEG or DTS.
m Speaker configuration
The most recommended speaker configuration is the 6 speaker
configuration: 2 main speakers, 2 effect speakers, a center
speaker and a subwoofer.
The main speakers are used for the main source sound. The
effect speakers are used for the effect and surround sounds,
and the center speaker is for the center sounds (dialog etc.).
The subwoofer is for reinforcing low frequencies on your audio
system and low frequency effect sounds of the subwoofer-
channel.
For China and General models only
This unit is designed to output signals of 5.1 channels
efficiently according to your speaker system if you cannot set
up a full 6 speaker configuration. It depends on the setting of “3
Speaker” on the SET UP menu. Refer to pages 62 to 63 for
details. However, this setting is effective only on audio signals
output from the 6CH DISCRETE terminals.
m Placing speakers
Main speakers: On both sides of the TV and almost the
same height as the TV.
Effect speakers: Behind your listening position, facing
slightly inward. Nearly 1.8 m (approx. 6
feet) up from the floor.
Center speaker: Precisely between the main speakers.
(To avoid interference with TV sets, use a
magnetically shielded speaker.)
Subwoofer: The position of the subwoofer is not so
critical because low bass tones are not
highly directional.
Main L Center Main R
Effect L Effect R
Subwoofer
TV set
Subwoofer
Effect L
Effect R
Main L
Main R
Center
Connections
10
COAXIAL
IN
OPTICAL
IN
1
MIXED 2CH
VIDEO
COMPONENT VIDEO
VIDEO OUT
S VIDEO
Y
P
B
P
R
1
2
DIGITAL
VIDEO OUT SELECT
VIDEO/
S VIDEO
COMPONENT
VIDEO OUT
MPEG
/
DTS
COAXIAL OPTICAL
PCM
/
DIGITAL
AUDIO OUT
REMOTE
CONTROL
OUT IN
Connections
When you connect this unit to an AV amplifier or receiver
equipped with a Dolby Digital, MPEG or DTS decoder, connect
this unit’s OPTICAL (or COAXIAL) terminal to the amplifier’s
optical (or coaxial) digital signal input terminal.
* If the amplifier and Dolby Digital (or MPEG or DTS) decoder
are separated, connect this unit’s OPTICAL (or COAXIAL)
terminal to the decoder’s optical (or coaxial) digital signal
input terminal.
* When you use the Dolby Digital, MPEG or DTS decoder, be
sure to use “1 Digital Output” on the SET UP menu of this
unit to select the “Disc Original” mode for “Dolby Digital”,
“MPEG” or “DTS”. (Refer to page 59 for details.)
Also, connect this unit’s MIXED 2CH AUDIO OUT terminals to
the amplifier’s analog signal input terminals regardless of
making the digital terminal connection. This is necessary for
playing back a source in 2 channel stereo or with Dolby Pro
Logic decoded.
A digital terminal connection is necessary between this
unit and the amplifier (or decoder) for sending the
playback signals of a source encoded with Dolby Digital,
MPEG or DTS to the amplifier (or decoder). This
connection allows you to enjoy a theater-like surround
sound in your home.
Caution: Plug in this unit and other components after all connections are completed.
All connections must be correct, observing the color coding of terminals between this unit and other components.
Audio connections
m Connecting to an AV amplifier (or receiver) equipped with a Dolby Digital,
MPEG or DTS decoder, or connecting to a Dolby Digital, MPEG or DTS
decoder
Connection cord
(not included)
Main
speaker
(Left)
Center
speaker
Main
speaker
(Right)
Subwoofer
To AC
outlet
Rear (surround) speaker
(Left)
Rear (surround) speaker
(Right)
or
Optical fiber cable
(not included)
Connection cord
(included)
Refer to pages 14-15 for VIDEO
OUT terminal connections.
Refer to pages 14-15 for VIDEO
OUT terminal connections.
AV amplifier or receiver equipped with
a Dolby Digital, MPEG or DTS decoder
Analog audio
input terminals
This unit (U.S.A. model)
11
English
Connections
Notes on connecting to this unit’s OPTICAL terminal
●
Before using this terminal, remove the terminal’s cover by
pulling it.
●
Make the connection from this terminal to the optical input
terminal of an amplifier by using a commercially available
optical fiber cable.
* Use an optical fiber cable that conforms to EIAJ
standards. Other cables might not function correctly.
●
Be sure to attach the terminal’s cover when this terminal is
not being used, in order to protect the terminal from dust.
When you connect this unit’s OPTICAL or COAXIAL
terminal to the optical or coaxial digital input
terminal of the amplifier which does not include a
Dolby Digital, MPEG or DTS decoder
Use “1 Digital Output” on the SET UP menu to select the
“PCM” mode for “Dolby Digital” and “MPEG”, and select the
“OFF” mode for “DTS”. (Refer to page 59 for details.)
Digital signal output from this unit
For a DVD disc only, the format of digital signal output from this
unit can be selected by the setting of “1 Digital Output” on the
SET UP menu. (See page 59.)
For your reference:
●
Linear PCM is a signal recording format used in CDs. While
CDs are recorded in 44.1 kHz/16 bit, DVDs are recorded in
48 kHz/16 bit up to 96 kHz/24 bit.
●
If you have a Dolby Pro Logic Surround decoder or your AV
amplifier includes a Dolby Pro Logic Surround decoder, you
will obtain the full benefit of Dolby Pro Logic from the same
DVD movies that provide full 5.1-channel Dolby Digital
sound tracks, as well as from titles with the Dolby Surround
mark.
●
Digital signal for linear PCM (48 kHz 20/24 bit) will be
converted into 48 kHz 16 bit and will be output if a DVD you
play back is formatted with code scramble system
(copyright-protection).
Disc
format
Audio
format
Digital signal output from the
OPTICAL and COAXIAL
terminals of this unit
DVD
Dolby Digital
When “Disc
Original” is
selected on “1
Digital Output”
Dolby Digital
bitstream
(2–5.1ch)
PCM (2 ch)
(48 kHz/16 bit)
Video
CD
MPEG 1
audio
PCM (2 ch)
(44.1 kHz/16 bit)
CD Linear PCM PCM (2 ch)
(44.1 kHz/16 bit)
Linear PCM
(48 kHz
16/20/24 bit)
Linear PCM (2 ch)
(48 kHz 16/20/24 bit)
Linear PCM
(96 kHz)
MPEG
(2 or 1)
audio
MPEG (2 or 1)
audio
bitstream
PCM (2 ch)
(48 kHz/16 bit)
When “PCM” is
selected on “1
Digital Output”
When “Disc
Original” is
selected on “1
Digital Output”
When “PCM” is
selected on “1
Digital Output”
DTS
DTS bitstream
No output
When “Disc
Original” is
selected on “1
Digital Output”
When “OFF” is
selected on “1
Digital Output”
Linear PCM
(2 ch) (48 kHz)
No output
When “48kHz
PCM” is
selected on “1
Digital Output”
When “OFF” is
selected on “1
Digital Output”
Terminal’s cover
12
Connections
This unit includes a Dolby Digital decoder. This enables the
playback of DVDs encoded with Dolby Digital without the need
for an external Dolby Digital decoder. When this unit is
connected to an AV amplifier with 6 channel input terminals,
you can enjoy theater-like surround sounds in your home when
playing back discs encoded with Dolby Digital.
Notes
•
After connections are completed, change the settings of “3
Speaker” on the SET UP menu according to your speaker
system. (See page 62.)
•
When you play back a disc recorded in 2 channel stereo, the
signals are output from the 6CH DISCRETE MAIN terminals
only.
•
You can also connect the OPTICAL or COAXIAL DIGITAL
AUDIO OUT terminal to the amplifier if the amplifier has the
corresponding digital input terminal(s).
If either of those terminals is connected to the amplifier
which does not include a Dolby Digital, MPEG or DTS
decoder, use “1 Digital Output” on the SET UP menu to
select the “PCM” mode for “Dolby Digital” and “MPEG”, and
select the “OFF” mode for “DTS”. (Refer to page 59 for
details.)
m Connecting to an AV amplifier (or receiver) equipped with 6 channel input
terminals
For China and General models only
1
MAIN
MIXED 2CH
VIDEO
COMPONENT VIDEO
VIDEO OUT
MODE SELECT
PAL NTSC
S VIDEO
Y
P
B
P
R
1
2
SUB
WOOFER
CENTER
SURROUND
6CH DISCRETE
DIGITAL
VIDEO OUT SELECT
VIDEO/
S VIDEO
COMPONENT
VIDEO OUT
MPEG
/
DTS
COAXIAL
OPTICAL
PCM
/
DIGITAL
AUDIO OUT
GND
MONITOR OUT
DVD/LD TV/DBS
IN OUT
VCR
IN OUT
VCR
PHONO
DVD/LD TV/DBS
TAPE
PB
REC
OUT
3 4
DVD/LD
TV/DBS
MAIN
R L
SURROUND
R L
CENTER
SUB
WOOFER
6CH
DISCRETE
INPUT
VIDEO
SIGNAL
TAPE
/MD
This unit (General model)
To AC outlet
AV amplifier or receiver equipped
with 6 channel input terminals
Main speaker
(Left)
Center speaker
Main speaker
(Right)
Subwoofer
Rear (surround) speaker
(Left)
Rear (surround) speaker
(Right)
Refer to pages 14-15 for VIDEO
OUT terminal connections.
13
English
DVD
1
MIXED 2CH
VIDEO
COMPONENT VIDEO
VIDEO OUT
S VIDEO
Y
P
B
P
R
1
2
DIGITAL
VIDEO OUT SELECT
VIDEO/
S VIDEO
COMPONENT
VIDEO OUT
MPEG
/
DTS
COAXIAL OPTICAL
PCM
/
DIGITAL
AUDIO OUT
REMOTE
CONTROL
OUT IN
Amplifier
Connections
m
Connecting to a stereo amplifier that has neither 6 channel audio signal
input terminals nor Dolby Digital decoder
Connect this unit’s MIXED 2CH AUDIO OUT terminals to the amplifier’s audio signal input terminal printed as “DVD”, “VIDEO”,
“AUX”, etc.
6 channel audio signals encoded with Dolby Digital are mixed down into 2 channels and output from the MIXED 2CH AUDIO OUT
terminals.
Note
If you have no stereo amplifier available, you can connect this unit’s MIXED 2CH AUDIO OUT terminals to your TV’s audio signal
input terminals (if your TV is equipped with RCA type audio signal input terminals).
Refer to pages 14-15 for VIDEO
OUT terminal connections.
Refer to pages 14-15 for VIDEO
OUT terminal connections.
This unit (U.S.A. model)
For Custom Installer
For U.S.A. model only
REMOTE CONTROL (IN, OUT) terminals
These terminals are used for custom installation system.
When this unit is connected to the components for custom
installation system, you can operate this unit with the
system remote control.
Connect the REMOTE CONTROL IN terminal of this unit to
the output terminal of the central controller for custom
installation system.
By connecting the REMOTE CONTROL OUT terminal of
this unit to the REMOTE CONTROL IN terminal of the other
component, you can also operate it with the system remote
control. In this way, up to 6 components can be connected
in series.
REMOTE
CONTROL
OUT IN
Connection cord
(included)
14
Connections
Video connections
m
Connecting to an amplifier equipped with an RCA type video signal input
terminal (including an S-video input terminal)
Connect this unit’s VIDEO 1 (or 2) terminal to the amplifier’s RCA type video signal input terminal (labeled “DVD/LD” etc.).
If your amplifier has an S-video input terminal, you can connect this unit’s S VIDEO terminal to the amplifier’s S-video input terminal
by using a commercially available S-connector cable.
When the connection is made in one of these ways, be sure to set the VIDEO OUT SELECT switch to the “VIDEO/S VIDEO”
side.
This unit has two VIDEO terminals. The other terminal can be connected to another amplifier or TV.
Notes
● If your TV has an RCA type video signal input terminal
(including an S-video input terminal), this unit can be
connected to the TV directly.
● Do not connect this unit to the TV through a video cassette
recorder. Otherwise, the picture may not be played back
normally with some DVDs. This is because the copyright
protection circuit built-in this unit operates.
•
Be sure to change the setting of the VIDEO OUT
SELECT switch only when this unit is turned off or the
power cord of this unit is disconnected from the AC
outlet.
S VIDEO terminal
This unit provides you with a S VIDEO terminal in addition to
standard type VIDEO terminals.
The S VIDEO terminal transmits video signals separated into
luminance (Y) signals and color (C) signals. High quality
pictures are obtained from this terminal. In comparison with
the S VIDEO terminal, standard type VIDEO terminals
transmit “composite” video signals.
1
MIXED 2CH
VIDEO
COMPONENT VIDEO
S VIDEO
Y
P
B
P
R
1
2
DIGITAL
VIDEO OUT SELECT
VIDEO/
S VIDEO
COMPONENT
VIDEO OUT
MPEG
/
DTS
COAXIAL OPTICAL
PCM
/
DIGITAL
AUDIO OUT
VIDEO OUT
VIDEO IN
VIDEO IN
S-VIDEO IN
S VIDEO
MONITOR
OUT
VIDEO
MONITOR
OUT
VIDEO IN S VIDEO IN
VIDEO OUT SELECT
VIDEO/
S VIDEO
COMPONENT
VIDEO OUT
or
S-video cable (not included)
TV monitor
Amplifier
TV monitor
Refer to pages 10-13
for AUDIO OUT
terminal connections.
Refer to pages 10-13
for AUDIO OUT
terminal connections.
This unit (U.S.A. model)
Connection cord
(not included)
Connection cord (included)
15
English
1
MIXED 2CH
VIDEO
COMPONENT VIDEO
S VIDEO
Y
P
B
P
R
Y
P
B PR
1
2
DIGITAL
VIDEO OUT SELECT
VIDEO/
S VIDEO
COMPONENT
VIDEO OUT
MPEG
/
DTS
COAXIAL OPTICAL
PCM
/
DIGITAL
AUDIO OUT
VIDEO OUT
VIDEO OUT SELECT
VIDEO/
S VIDEO
COMPONENT
VIDEO OUT
Connections
m
Connecting to a TV equipped with component video input terminals
You can connect this unit’s COMPONENT VIDEO OUT
terminals to your TV or projector, if your TV or projector has
component video signal input terminals.
The COMPONENT VIDEO OUT terminals output three types of
chrominance signals separately. By this connection, you can
enjoy high quality pictures with vivid colors.
If you make this connection, be sure to set the VIDEO OUT
SELECT switch to the “COMPONENT VIDEO OUT”
position.
Note
Do not connect this unit’s COMPONENT VIDEO OUT
terminals to component video input terminals special for HD
(High-Definition) TV.
Video connection
cords (not included)
This unit is designed for use with the NTSC and PAL
television formats. Set this switch to the position for the
format your TV monitor employs.
PAL: Set to this position if your TV monitor employs the
PAL format.
NTSC: Set to this position if your TV monitor employs the
NTSC format.
Notes
•
Be sure to change the setting of this switch only when
this unit is turned off or the power cord of this unit is
disconnected from the AC outlet.
•
If “6 Signal System Conversion” on the SET UP menu is set
to “Disc”, the setting of this switch becomes ineffective when
a DVD or Video CD disc is played back. The format
employed on the disc currently played back is automatically
selected.
MODE SELECT (PAL/NTSC) switch <China and General models only>
EO
COMPONENT VIDEO
VIDEO OUT
MODE SELECT
PAL NTSC
S VIDEO
Y
P
B
P
R
TV monitor
Refer to pages 10-13
for AUDIO OUT
terminal connections.
This unit (U.S.A. model)
NATURAL SOUND DVD PLAYER DVD
-
C900
POWER
AUTO
DISPLAY OFF
12
DVD
/
VIDEO CD
/
CD
12345
DISC
PLAYXCHANGE
OPEN/CLOSE
SKIP/
SEARCH
/
CD
/
CD
12345
6
+10
7890
A
-
BS
/
FCANCEL
ANGLE
SELECT
TITLE AUDIO
MENU
SUBTITLE
SET UP
ON SCREEN
OFF
/
ON
MULTI SPEED
RETURN
TITLE
/
INDEX
REPEAT
DISC SKIP
PROG
RANDOM
DISC MODE
TIME
OPEN
/
CLOSE
STOP
STILL
/
PAUSE
SKIP/SEARCH
PLAY
16
The On-Screen Display language of your model has been
factory preset as follows:
U.S.A. and General models: English
China model: Chinese
If you would like to change the On-Screen Display language to
another language, please refer to “OSD Language” on the
SET UP menu on page 54.
Preparations
•
If you play back a DVD or a Video CD, turn the TV on and
make some setting changes on the TV if necessary.
•
Turn on the power of your stereo system if this unit is
connected to the stereo system.
Basic playback
1 Press POWER to turn on the power.
2 Press OPEN/CLOSE to open the disc table.
3 Place discs on the trays, label side upward.
* Up to five discs can be loaded on the trays.
The trays are numbered 1 to 5.
* 8 cm (3”) discs can be played back without an adaptor.
4 Press OPEN/CLOSE to close the disc table.
* The disc on the tray 1 is ready to be played back.
Playback may begin automatically depending on some
DVDs.
* If no disc is loaded on the disc tray 1, select another
disc by following step 6.
5 If necessary, change the disc play mode (to “DISC
1” or “DISC 5”) by pressing DISC MODE on the
remote controller confirming it on the front panel
display.
When “DISC 1” is illuminated: Only a designated disc
is played back.
When “DISC 5” is illuminated: All discs on the disc
table are played back sequentially.
6 If you want to select another disc, press DISC
SKIP on the remote controller once or more, or
press DISC (1, 2, 3, 4 or 5) on the front panel.
7 Press PLAY on the remote controller
or / on the front panel to begin playback.
* Playback begins.
* You can skip this step if the disc is already played
back automatically.
When a screen menu appears on the monitor
screen, go on to step 8.
In case of DVDs with menu or Video CDs with Playback
Control, a screen menu appears on the monitor screen.
Example)
1 Sights
TITLE MENU
3 Foods
4
Souvenirs
2 Hotels
Basic operation
5
6
2, 4
7
6
2, 4
1
7
3
Sidan laddas ...
Sidan laddas ...
Sidan laddas ...
Sidan laddas ...
Sidan laddas ...
Sidan laddas ...
Sidan laddas ...
Sidan laddas ...
Sidan laddas ...
Sidan laddas ...
Sidan laddas ...
Sidan laddas ...
Sidan laddas ...
Sidan laddas ...
Sidan laddas ...
Sidan laddas ...
Sidan laddas ...
Sidan laddas ...
Sidan laddas ...
Sidan laddas ...
Sidan laddas ...
Sidan laddas ...
Sidan laddas ...
Sidan laddas ...
Sidan laddas ...
Sidan laddas ...
Sidan laddas ...
Sidan laddas ...
Sidan laddas ...
Sidan laddas ...
Sidan laddas ...
Sidan laddas ...
Sidan laddas ...
Sidan laddas ...
Sidan laddas ...
Sidan laddas ...
Sidan laddas ...
Sidan laddas ...
Sidan laddas ...
Sidan laddas ...
Sidan laddas ...
Sidan laddas ...
Sidan laddas ...
Sidan laddas ...
Sidan laddas ...
Sidan laddas ...
Sidan laddas ...
Sidan laddas ...
Sidan laddas ...
Sidan laddas ...
Sidan laddas ...
Sidan laddas ...
Sidan laddas ...
Sidan laddas ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
Yamaha DVDC900 Användarmanual
- Kategori
- DVD-spelare
- Typ
- Användarmanual
- Denna manual är också lämplig för
på andra språk
- italiano: Yamaha DVDC900 Manuale utente
- čeština: Yamaha DVDC900 Uživatelský manuál
- español: Yamaha DVDC900 Manual de usuario
- Deutsch: Yamaha DVDC900 Benutzerhandbuch
- polski: Yamaha DVDC900 Instrukcja obsługi
- português: Yamaha DVDC900 Manual do usuário
- français: Yamaha DVDC900 Manuel utilisateur
- Türkçe: Yamaha DVDC900 Kullanım kılavuzu
- English: Yamaha DVDC900 User manual
- dansk: Yamaha DVDC900 Brugermanual
- русский: Yamaha DVDC900 Руководство пользователя
- suomi: Yamaha DVDC900 Ohjekirja
- Nederlands: Yamaha DVDC900 Handleiding
- română: Yamaha DVDC900 Manual de utilizare
Relaterade papper
-
Yamaha DV-C6280 Användarmanual
-
-
-
Yamaha NX-S100S Användarmanual
-
-
-
-
-
-