Coboc Seven Kallio Small E-Bike Bruksanvisning

1

Original Bedienungsanleitung User Manual

SEVEN Kallio

SEVEN Kallio Comfort

2

Hello.

3

Congratulations on your

SEVEN Kallio

SEVEN Kallio Comfort

English

4

Our brand stands for sustainable design and maximum functionality. We

don’t mind taking unconventional paths as long as the products we pass

on to our clients fully convince us.

Please make sure to have read and understood the complete user manual

before using your SEVEN Kallio, as it contains a lot of relevant information

for your personal safety. Non-observance may lead to serious accidents, as

well as personal or material damage.

This manual applies to your Coboc SEVEN Kallio or your SEVEN Kallio

Comfort. Both models differ in the specication of the components, which

has hardly any inuence on the operation of the bikes. The only remarkab-

le difference comes with regards to suspension seat posts and suspension

fork of your SEVEN Kallio Comfort.

The according sections are marked by either "SEVEN Kallio only" or

"SEVEN Kallio Comfort only".

Each other person using, repairing, servicing or disposing of your Coboc

bike, has to fully acknowledge and understand the content of the user

manuals.

If there still are any unanswered questions please contact your local Coboc

dealer. This user manual is part of the scope of delivery of your SEVEN

Kallio. It is only valid for the product shipped along with it. Please make

sure to store this manual in a safe place.

Please also make sure to enquire information about your national guide-

lines before using your Coboc bike on public roads. Take note that for

improvement purposes. The contents of this manual could be altered

without prior public announcement.

You may nd possible updates at: www.coboc.biz/en/manuals

But for now we wish you an electrifying riding experience.

Your Coboc Team.

Welcome to Coboc

February 2020

5

Overview – SEVEN Kallio

Overview – SEVEN Kallio Comfort

Safety Instructions

Quick Start Guide

Legal Provisions

Intended Use

• Weight information for your SEVEN Kallio

• Rack

• (Kids) Trailers

• Child Seat

• Frame Lock

Before Every Ride

Handling

• Operating the Coboc Electric Drive

• Operating the Lights

• Notes on Using the Brakes

• Hydraulic Disc Brakes

• Level of Motor Support

• Two Different Drive Modes

• Gear Shift

Coboc App

Battery & Charger

• Range

• Charging the Battery

• Storage

• Transport

• Disposal

Page 6

Page 7

Page 8

Page 9

Page 12

Page 13

Page 14

Page 17

Page 19

Page 20

Page 23

Page 33

Page 34

Page 35

Page 36

Page 38

Page 39

Maintenance & Care

• Care Instructions

• Safety Instructions for Carbon Components

• Special Features of Carbon

• Care Instructions for Carbon Components

• Inspection

• Wear Parts

• Lubrication

• Repairing Punctures

• Removing the Rear Wheel

• Installing the Rear Wheel

• Adjusting the Brakes

• Testing the Brakes

• Aligning your Brake Caliper

• Checking the Brake Pads

• Checking the Rims

• Adjusting the Gear Shifting

• Adjusting the Headset

• Suspension Seat Post (SEVEN Kallio Comfort only)

• Suspension Fork (SEVEN Kallio Comfort only)

Error Codes

Tightening Torque

Geometry

Technical Specications

Warranty & Guarantee

EG - Declaration of Conformity

Content

English

6Overview – SEVEN Kallio

Motor Cable

User Interface

with Powerbutton and Bluetooth

Hub Motor

Rear Derailleur (10 gears)

Integrated Rear Light

Headset

Coboc Electric Drive

integrated in Down Tube

Pedal

Stem

Handlebar

Front Light

Charging Socket

Bottom Bracket

with Torque Sensor

7

Overview – SEVEN Kallio Comfort

Headset

Coboc Electric Drive

integrated in Down Tube

Pedal

Stem

Handlebar

Front Light

Charging Socket

Bottom Bracket

with Torque Sensor

Suspension Seat Post

Suspension Fork

English

User Interface

with Powerbutton and Bluetooth

Integrated Rear Light

Motor Cable

Hub Motor

Rear Derailleur (10 gears)

8Safety Instructions

Please make sure that you’ve carefully read and understood the user

manual, before using your SEVEN Kallio for the rst time, as it contains a

lot of safety relevant information.

Non-observance may lead to serious accidents, as well as personal and/or

material damage. If you borrow your Coboc bike to someone you should

insist that those borrowing it have completely read and understood the

manual before riding for the rst time.

The user manual is best kept close to your Coboc bike, so that it is acces-

sible at any time needed. Always ride responsibly, as cyclists are exposed

to increased risks, especially when riding on public roads. We recommend

wearing a safety helmet during every cycling trip. The safety helmet should

be correctly adjusted to your head and its intended purpose. Follow the

helmet manufacturers instructions. Wear a suitable outt. It should be

bright and you should attach reectors so that other road users can reco-

gnize you early enough. Clothing in the leg area should have a tight t so

that your clothes can’t get caught in your Coboc bike.

Use cycle clips if needed. Entangling clothes in your Coboc bike may result

in an accident. Take into account the increased performance. Due to the

electric motor in your SEVEN Kallio the performance is considerably higher

than that of ordinary bikes. On the one hand this means that higher top

speeds can be reached and on the other hand that more torque is trans-

mitted to the rear wheel. This may lead to unusual sliding of the wheels,

especially on wet ground.

Get used to your SEVEN Kallio. The special characteristics of your Coboc

bike require you to familiarise with them in safe and open areas. Only use

your Coboc bike in public as soon as you have it under control.

Symbols

For a more simple readability certain points in this user manual are high-

lighted. We used the following symbolism for that:

INFO: this symbol highlights valuable information and points

worth knowing.

CAUTION: this symbol warns you against improper use, that may

lead to environmental pollution, damage to your Coboc bike or

other material damage.

WARNING: this symbol indicates possible health hazard and dan-

ger to life, that may occur if the bike is being operated incorrectly

or used improperly.

9

Adjusting brake levers

Loosen the clamp screws (5) and adjust the brake lever according to your

preferred grip position. It should be comfortable and safe at the same

time. Afterwards tighten the clamp screws (5) again.

Setting Headset Bearing

Check if the headset bearing has play. To do that, you must pull the front

brake while pushing your bike back and forth a couple of times. The

handlebar should be able to slightly move from left to right, while bearing

clearance should stay at a minimum. If there is bearing clearance, again

loosen both screws (2) and slowly tighten screw (4) until the bearing has no

play anymore. Afterwards tighten both screws (2) again.

Do not tighten screw (4) too much, as this may lead to a damaged

headset bearing. If the handlebar only turns with effort, then this

could mean that screw (4) has been tightened too much. If this is

the case, loosen screws (2) in order to slightly loosen screw (4). Afterwards

tighten both screws (2) again.

Quick Start Guide

(1)

SCOPE OF DELIVERY

SET UP

Coboc bikes are almost completely assembled at the point of delivery.

However, handlebar and pedals are loosened for transport, which is why, prior

to your rst ride, you must bear in mind the user manual while taking the

following steps. Particularly take into consideration the safety instructions and

the indicated tightening torque for screw ttings (s. chapter Maintenance &

Care such as table Tightening Torque).

Screwing on Pedals

Lightly grease the pedal threads before screwing them into the intended

cranks (1).

Both pedals have different threads and need to be screwed in

at the intended side. The right pedal has a right-handed thread,

while the left pedal has a left-handed thread. Mixing them up may

lead to damaged crank arms or pedal threads. Make sure both pedals are

tightened.

Aligning Handlebar and Stem

First loosen both screws (2). The tting hex socket key is included with delivery.

Align the handlebar in a way that stem and front wheel are in line with each

• SEVEN Kallio (Comfort)

• Battery Charger

• Coboc URB Pedals

• Hex Socket Key

• User Manual

• Reector Set

other. Now tighten screws (2) again. Afterwards loosen the four screws in the

stem (3). Turn the handlebar into desired riding position and tighten screws

afterwards. Make sure that you tighten all four screws (3) equally.

(2)(5)

(5) (4)

(3)

English

10

Adjusting the Suspension Seat Post (SEVEN Kallio Comfort only)

A suspension seat post (1) is installed on your SEVEN Kallio Comfort. This

seat post is factory-tted with a medium hardness steel spring. By ma-

nually pretensioning the spring, the seat post can be adjusted slightly to a

higher rider weight (s. chapter Maintenance and Care). If it is still too hard

or too soft, your Coboc dealer can retrot a harder or softer spring.

Align Grips

Ergonomic Ergon GP10 grips are installed on your SEVEN Kallio. With

their enlarged contact surface on the ball of the hand, they effectively

prevent the wrists from kinking and enable fatigue-free riding.

In order for them to function most efciently, they should be mounted

with the contact surface aligned horizontally. Keep the screw connection

slot in horizontal alignment with the surface aswell (2).

Quick Start Guide

Adjusting the Suspension Fork (SEVEN Kallio Comfort only)

Your SEVEN Kallio Comfort is equipped with a monoshock suspension

fork. If the fork is too soft (it rushes through the spring travel and hits

through even when the handlebars are under light load), a harder spring

can be retrotted. To do this, contact your Coboc dealer (s. chapter Main-

tenance & Care).

Checking Tire Pressure

Check for tire pressure before the start of every ride. The correct pressure

is given on the side of the tire and can differ depending on the tire model.

The specied air pressure for your SEVEN Kallio must not be

fallen below or exceeded. Riding with too little or too much air

pressure can damage the rim and lead to a fall.

COBOC ELECTRIC DRIVE

Operating the Power Button

The Coboc Electric Drive is switched on by briey pressing the power

button (3) on the user interface at the top of the down tube. At least one

LED of the LED display in the power button, which shows the battery level,

lights up. Putting more force into the pedals means unfolding more motor

power. As soon as you stop pedaling, the motor support stops too.

Because of the electrical support you are going to be much faster

and dynamic on the road than you are used to with ordinary

bikes. We suggest you take your time to get used to this new

riding behavior.

(1) (3)(2)

11

5 LEDs lit up Blue Battery Level 80 % to 100 %

4 LEDs lit up Blue Battery Level 60 % to 80 %

3 LEDs lit up Blue Battery Level 40 % to 60 %

2 LEDs lit up Blue Battery Level 20 % to 40 %

1 LED lit up Blue Battery Level 1 % to 20 %

4 LEDs ashing Red Error Motor Cable

3 LEDs ashing Red Error Torque Sensor in Bottom Bracket

2 LEDs ashing Red Other Error

1 LED ashing Blue Battery Low

RIDING

Your SEVEN Kallio rides like an ordinary bike – only it’s more dynamic. The

more force you use to tread the pedals, the more force is unfolded in the

motor. As soon as you stop treading the pedals, the motor stops supporting

you.

You are going to be much more dynamic with your SEVEN Kallio

than you are used to. Slowly get used to your Coboc bike.

Should you ever have the feeling that the motor support is tuning

in too early or too late, meaning at very low or very high pressure

on the pedals, note that you can always re-calibrate the torque

sensor. You can nd all the necessary information at our helpcenter https://

support.coboc.biz navigating to 'Service und Pege' › 'wie kalibriere ich

mein Coboc Bike?'.

(4)

Quick Start Guide

Fehler - LEDs ashing

Battery level – LEDs are lit up

In the event of irregularities in operation or other errors, resetting

the user interface might help. To do this you need to press and

hold the power button (3) for about 20 seconds. Your bike is going

to signalize a successful reset by briey ashing the LEDs in blue and subse-

quently scrolling them fromthe center to the outside in green light.

CHARGING

The charging socket (4) is located on the underside of the top tube, which

is located directly above the bottom bracket. Simply connect the magnetic

charging plug to start charging your SEVEN Kallio.

A full charge of the battery from 1% to 100% usually takes two and a half

hours with the regular Coboc 4A charger. However, the battery is already

charged to 90% after two hours, which means that the charging time for

the last 10% takes a bit longer (half an hour).

The ideal outside temperature for battery charging is somewhere between

5ºC and 35ºC. At temperatures below 0ºC or above 40ºC electronics disa-

bles charging, in order to protect the battery from getting damaged.

Turning your Lights On and Off

Your SEVEN Kallio is equipped with a lighting system. You can turn this

system on and off by pressing down on the power button (3) for 3 se-

conds. This is also possible if the Coboc Electric Drive is turned off.

English

12

Please observe the existing regulations and laws in your country before

using your SEVEN Kallio on public roads. Below are shown the current

most important regulations for Germany only. For a complete listing of

regulations we refer you to the according legislative texts. Since pedelecs

are a rather young vehicle category, so are related laws and regulations. As

these regulations are constantly changing, please make sure to frequently

check for any changes in legislation and regulation.

Within the EU, pedelecs with assisted pedalling up to 25 km/h and a

motor with a continuous performance of 250 watts are controlled with the

same regulations as ordinary bikes. Bikes with pedal assistance that may

reach higher top speeds and/or higher motor performance are, according

to EU directive 2002/24/EG, referred to as low-performance mopeds. Such

vehicles require a type approval, such as the duty to wear a helmet and an

insurance obligation.

Coboc bikes are shipped with 25 km/h and a motor performance of 250

watts as standard, which is why, according to EU directive 2002/24/EG,

they are exempt from type approval.

German road trafc regulations (StVO) and road trafc licensing act

(StVZO) apply if using public roads. Additionally, the StVZO requires the

following for bikes:

A clearly audible bell.

A permanently xed lighting system with white headlight and red rear

light. In order to use the lighting system, bikes need to be equipped with

either a generator or a rechargeable energy storage or a combination of

both.

The following reectors need to be attached to the bike:

• A white reector in the front.

• A red reector in the back, it may not be a triangular reector of the

category “Z”. It may, however, be integrated into the rear light.

• Laterally tted reectors have to be attached at the front and rear

part of the bikes, while at least one has to be attached to the spokes.

Alternatively, you may use tires with reective rings on both front

and rear ends. Every laterally tted reector needs to have the same

colour (yellow or white).

• Pedals need to be equipped with reectors radiating to front and

back.

According to StVZO, bicycle bell and reectors need to be attached to the

bike for use on public roads. If necessary a lighting system needs to be

retrotted to the bike. Please make sure that your lighting system is at no

time concealed. You may not use your SEVEN Kallio on public roads if the

lighting system is somehow damaged. Please contact your local Coboc

dealer if repair or maintenance is necessary.

Responsibility for road safety for every Coboc bike remains with the

customers.

Legal Provisions

13

Intended Use

Weight Information for your SEVEN Kallio

Don't overload your Coboc bike. The permissible total weight must not be

exceeded. It consists of the weight of the Coboc bike + rider + luggage +

other payload (child seat, bike trailer etc.).

max.

Total Weight Bike Weight max.

Rider Weight max.

Rack Load max. Trailer

Total Weight

140 kg 17,5 kg 120 kg 10 kg + 10 kg 50 kg

Rack

A detachable Coboc rack and mudguards are installed on your SEVEN Kal-

lio. A maximum of 10kg may be loaded on each side of the luggage rack.

You should always bear in mind, that the permissible total weight should

not be exceeded even with luggage. Regularly check that mounting

screws for the mudguards and luggage rack are tightened rmly.

Starting in Summer season 2020, we will offer you attachments for your

luggage rack, which provides a platform type rack for your luggage. You

can obtain the attachment in two versions from your Coboc dealer:

• with Spring Flap

• with Racktime SnapIt2 system. With this attachment and the corre-

sponding Racktime Snap-It2 adapter it is possible to mount various

Racktime Snap-It system bags or / baskets on the rack of your SEVEN

Kallio.

The platform rack attachment can be loaded with a maximum of 20kg.

It is essential that you have your Coboc dealer carry out the assembly of

your rack attachment.

Don't take anyone with you. Your Coboc bike is designed solely

for the transportation of individuals. Exceptions are the transport

of children in a suitable child trailer or child seat. Observe the

national legislation and the permissible total weight of your Coboc bike.

According to the StVo, the transportation of luggage requires a suitable

device on the bicycle.

(Kids) Trailer

Your SEVEN Kallio can pull a one or two-lane (kids) trailer. It should be

installed on the KSA18 rear stand holder of your Coboc bike frame using

a Weber EU coupling (1) and shall not exceed a total weight of 50 kg. The

maximum permissible total weight of your bike must not be exceeded

even with a trailer and payload. For more information, contact your Coboc

dealer. Always have a Coboc dealer carry out the installation of a trailer.

Child Seat

Your SEVEN Kallio is suitable for mounting a child seat with a clamp on

the seat tube (e.g. Römer Jockey) of your bike frame. Only use tested and

approved child seats with this type of attachment. For more information,

contact your Coboc dealer. Have the child seat installed by a Coboc

dealer.

Children sitting in child seats should always wear a suitable hel-

met. If your Coboc bike is parked on the side stand, there should

not be any child sitting in the child seat, because there is an

increased risk of tipping over due to the shifted center of gravity.

English

(1)

14

Frame Lock

Your SEVEN Kallio is prepared for the installation of a frame lock (1). An

M5 screw thread is embedded in the frame on the underside of the seat

tubes. To install a suitable frame lock, please contact your Coboc dealer.

Your Coboc bike is not meant to be exposed to extreme stress

like riding stairs or ramps, so we recommend avoiding such

scenarios.

If your Coboc bike is equipped according to the national legislation, it

may be used on public and paved roads. Please bear in mind the tips in

chapter 5 – Legal Regulations.

Also note that complying to the operation and maintenance conditions

explained in this user manual is part of the intended use for Coboc bikes.

Your Coboc bike is not a toy. Do not let children handle your Co-

boc bike without detailed instructions or leave them unattended

at any time. You should brief children on the dangers associated

with the use of electronic devices. Please follow the regulations for mini-

mum age of use that are valid in your country.

The A-weighted emission sound pressure level at the rider’s ears is less

than 70 dB(A).

Coboc, such as our dealers, assumes no liability for any use other

than the one intended, especially regarding non-compliance with

the information given in this user manual.

Intended Use Before Every Ride

Make sure your SEVEN Kallio is ready for operation and that it is adjusted

to your body height. Saddle height and handlebar position should be

adjusted properly. Your saddle should be set to a comfortable and safe

height.

Choosing a frame size that does not suit your height or a defecti-

ve adjustment may lead to loss of control and ultimately may lead

to slips or crashes which again may lead to serious injuries and

damage. If you have problems with picking the right frame size or how to

properly adjust your Coboc bike, please refer to your local Coboc dealer.

Adjusting the Saddle Height

The seat post may under no circumstances be put higher than the

minimum depth of insertion. A mark at the seat post signals the

designated minimum depth of insertion. Pulling the seat post out

too far may result in crashes and serious damage to you and your bike. By

using your Coboc bike when the minimum insertion depth is undershot,

the Coboc manufacturer's warranty for any resulting damage to your bike

is void.

You may position your saddle in three different directions. First, make sure

that the seat post clamping at the frame and the saddle clamping at the

seat post are rmly tightened. Sit on the saddle and put one foot on the

pedal while posting your other foot on the ground. Now use your heel to

carefully tread the pedal until the crank arm is in line with the saddle tube.

If you are standing on the pedal but your leg is not fully extended, this

means that the saddle is probably too low. Vice versa if you have to reach

for the pedal or if you have to tip your pelvis forward, that means that your

saddle is positioned too high. If needed, you can loosen the seat post

clamping at the frame, adjust the correct saddle height and tighten the

clamping again.

(1)

15

Before Every Ride

Make sure that the saddle is in line with the top tube of your bike. Again,

you may loosen the seat post clamping, in order to move the saddle left

and right, before tightening it again. It is also possible to change the sadd-

le tilt relative to the top tube. Just loosen the clamping at the seat post,

adjust to your needs and tighten again.

Please bear in mind the permissible torque for all these steps (s.

table Tightening Torque) and make sure that all screw ttings are

tightened before using your Coboc bike or sitting on your saddle

to adjust it again.

Regular Monitoring

Make sure that the lighting system on your SEVEN Kallio works in the front

and in the back.

You should be able to reach both braking levers without any problems.

Also make sure to know which braking lever applies to which brake. As

standard, the right brake lever applies to the rear brake and the left brake

lever applies to the front brake. Note that the braking distance increases

and that the tires might block faster if the ground is wet.

Make sure that the screws for your saddle, handlebar,grips and brakes are

tightened enough (s. table Tightening torque). In case of doubt you can

try twisting saddle, handlebar or brakes. Nothing should move. Also make

sure to regularly check all other screw ttings and ensure yourself that they

are tightened correctly. Make sure that frame and fork are not damaged.

Check regularly for abrasion of friction components within the brakes (s.

chapter Maintenance & Care).

Testing the Braking System

Push your Coboc bike forward while pulling the rear brake. If everything is

adjusted correctly the rear wheel should be blocking. If applying the front

brake, your rear wheel should leave the ground. Steering should not rattle

or have any play. The brake levers should not be pulled more than halfway

through during this test.

Checking the Wheels

Check the wheels and tire pressure! Inspect the tires and rims for abrasion,

damage, tears, deformations or smaller pieces that might be pushed in

(e.g. glass fragments or nails). We advise you to use a suitable bicycle

pump with built in pressure gauge. The optimal tire pressure is indicated

on the side of the tire and may differ depending on the tire model. In case

of doubt, or if you use components other than those already built in as

standard, please refer to the tire manufacturer, to ask for the correct tire

pressure. If tire pressure is too low, there is an increased risk of having at

tires due to rims pressing through the tube (snake bite). Furthermore this

might cause sustainable damage to the rim.

The minimum air pressure for your SEVEN Kallio must not be

fallen below. Riding with too little air pressure can damage the

rim. If the pressure is too high, tires or rims might be damaged. In

any case, wrong tire pressure might cause crashes.

Checking the Suspension Fork (SEVEN Kallio Comfort only)

Examine the suspension fork for external damage and check the correct

setting of the headset (s. Adjusting the headset) and the correct installati-

on of the front wheel brake. Also check the correct installation of the front

wheel (s. table Tightening Torques).

The suspension fork should compress smoothly when you put weight

on the handlebar from above. In addition, the suspension fork should

not have excessive play. Easy play, on the other hand, is quite normal to

ensure optimal function.

You can check lateral play by standing in front of the bike by clamping the

front wheel between your legs and turning the handlebar slightly in both

directions. Longitudinal play can be checked by pulling the front wheel

brake and pushing the bike back and forth over the handlebars with the

brake pulled. If you notice excessive play while doing this, rst make sure

that it is not due to the headset bearing setting. Possibly this can also be

due to an incorrectly tightened front wheel or brake caliper.

English

16 Before Every Ride

Before your ride, make sure that your battery level is high enough

for the intended journey (s. chapter Battery Level).

If the suspension fork ever makes a crackling noise or has more

travel (stroke) than usual, your bike must not be ridden under any

circumstances. Contact your Coboc dealer immediately and have

the fork checked.

If you are unsure about the function of your suspension fork, you

should not ride your SEVEN Kallio Comfort any further. Be sure to

contact your Coboc dealer.

Do not use the suspension fork with damaged or without bellows.

If the bellows is damaged, have your Coboc dealer replace it with

a new one immediately.

Checking the Suspension Seat Post (SEVEN Kallio Comfort only)

Check the function of your suspension seat post. It should be rmly clam-

ped in the seat tube via the saddle clamp and deect smoothly when you

press on the saddle from above. Check the side play by moving the saddle

slightly in all directions and lifting your bike by the saddle. Easy play is

completely normal to enable optimal function when deecting.

Also check the screw connection of the connection between the seat tube

and the spring element of your seat post. You can check the tightness

of the screw connection by trying to screw the cap further on to the seat

tube.

If you are unsure about the function of your suspension seat post, you

must not continue to ride your SEVEN Kallio Comfort. Be sure to contact

your Coboc dealer.

If you are not sure whether your Coboc bike is in technically safe

condition, do not start your ride. Let your local Coboc dealer or a

service partner check your bikes condition.

If you use your Coboc bike extensively then make sure to have your bike

checked more regularly from your Coboc dealer or a service partner (s.

chapter Maintenance & Care).

17

We assume that as a Coboc bike user you have gathered enough basic

experience with ordinary bikes. If this is not the case, we recommend

practicing on a bike without motor support. Because of the strong accele-

ration and the increased maximum speed it is recommended for you to be

able to handle bikes very good.

Get used to your Coboc bike. The special riding characteristics for Coboc

bikes require for you to familiarize with it on different terrain. Make sure

that you got it under control before starting to use your Coboc bike in

public.

Operating the Coboc Electric Drive

Your SEVEN Kallio has two operating modes:

“Bike off” / manual riding: You can always choose to ride your bike without

motor support. Motor support is turned off, if the ve LEDs on the top

tube are not lit up. You should keep motor support turned off, if storing or

not using your Coboc bike.

“Bike on” / riding with motor support: Pressing the power button turns

on motor support for your Coboc bike. Motor support is turned on, if the

ve LEDs on the top tube are lit up. In a turned on state LEDs indicate the

battery level and motor support goes up to maximum speeds of 25 km/h.

To turn your bike back off, just press the power button again. Your Coboc

bike turns off automatically after staying unused for more than three

minutes.

Operating the Lights

Your SEVEN Kallio is equipped with an integrated lighting system, which

can also be operated by the power button. You can turn it on and off by

pressing down the power button for three seconds. The lighting system is

controllable in both “bike on” and “bike off” mode and turns off automati-

cally after your bike stays unused for more than four minutes.

After the motor support has been switched off due to discharge, a residual

charge remains in the battery so that the lighting system can still be used

for 2 hours.

Handling

Notes on Using the Brakes

Make sure to know which brake lever belongs to which brake before starting

your ride. As standard the right brake lever belongs to the rear wheel brake

and the left brake lever belongs to the front wheel brake.

Regularly check the friction components for wear.

With your disc brakes it is essential to check the wear of the disc rotors.

Also the wear of the brake pads mounted in your brake caliper (s. chapter

Maintenance & Care).

If wear is too heavy on any of these components, this may lead to total failu-

re of the brake system. Hard falls and serious injury can be the result.

Use your brakes in a controlled and well-timed way. Too heavy

breaking may leave your wheels blocked and therefore lead to loss

of control. Hard falls and serious injury can be the result.

Hydraulic Disc Brakes

Avoid using the brakes permanently if riding downhill for longer periods

as this might cause steam bubble formation and therefore lead to loss of

control. Hard falls and serious injury can be the result. Always try to fully

release the brakes or to switch between front and rear wheel brakes. That

way the brake system can cool off. If necessary take a short break to cool

it off. Always check the braking point before your journey. If you are able

to pull the lever all the way back to the handlebar or of the braking point

changes while riding you may not continue riding. Let your Coboc dealer

either bleed your brake or x it, if needed.

English

18 Handling

Level of Motor Support

The level of motor support adapts to your riding behavior. The stronger

you tread the pedals, the more torque value is in the motor. This makes

a “level of support” choice unnecessary. However, you can apply a -

ne-tuning of your Coboc Electric Drive on your phone via our Coboc App.

Please note, that you may not use the Coboc App while riding your bike (s.

chapter Coboc App).

Two Different Drive Modes

Since rmware version 3.34 you are able to choose between two different

riding modes. You can either acces them via our Coboc App or by simply

operating the power button on your bike.

Drive settings for both modes can be adjusted individually and remain

even if smartphone and bike are not connected.

A double press of the power button allows you to switch between the two

riding modes. The second mode switches colors for the LEDs from blue to

sea green. You can also access the dashboard in your Coboc App to switch

between riding modes.

Only start pedaling if seated securely on your Coboc bike. As

soon as pressure is applied to the pedals, the motor support is

set free. If you want to sit on your bike by putting one foot on the

pedal while swinging over the saddle with the other leg, be aware that the

bike might abruptly start moving. Risk of falling!

Stop pedaling in time. Motor support is stopped as soon as the crank

stops turning. Be aware of this especially before road crossings and turns.

If you have any problems with your drive (ie. because you did not stop

pedaling in time) you may always stop the motor by using the rear wheel

brake.

Gear Shift

Your SEVEN Kallio has a built-in Shimano 10-speed gear shift. The shift le-

ver is positioned at the right lower side of the handlebar and is connected

to the rear derailleur installed on the rear wheel.

Both shift levers (A) and (B) are activated by pushing the lever. They both

come back into their starting positions after being pushed. To shift into a

heavier gear, shift lever (B) can also be operated with the index nger (in

front of the handlebar).

Make sure to keep pedaling, while gear shifting in order to succesfully

carry it out. Do not tread into the pedals backwards during a gear switch

as this may cause damage to the gear shift.

Reduce pressure on the pedals during gear shift. That way you can switch

between gears fast and smooth, while also reducing wear on chain and

sprocket.

Shifting gears at maximum weight may lead to chain tear. Serious

accidents and injuries can be the result.

19

Shifting to a Higher Gear

In order to switch to a higher gear push lever (B) until it clicks. Alternati-

vely, you can push the lever (B) back with your index nger. You can only

switch one gear at a time here, so in order to switch between several gears

you need to press the lever down several times.

Shifting to a Lower Gear

In order to switch to a lower gear push lever (A) until it clicks. To switch

several gears at a time keep pushing the lever until it clicks repeatedly. You

can switch down a maximum of three gears at once.

For further insight on montage and function of Shimano derailleurs visit

the manufacturers website or talk to your Coboc dealer.

Handling Coboc App

Coboc App

Coboc is constantly dealing with the zeitgeist of real bike culture. This

results in intelligent products that realize technical progress.

With our Coboc App, the range of functions for the Coboc rider can be

further expanded.

You can download the Coboc App for free via the App Store or Google

Play.

Since we are constantly improving and expanding the app, you can nd

the exact function and instructions on our website under

www.coboc.biz/en/the-coboc-app

Unfortunately, we cannot guarantee that the app will work on every

smartphone.

Please note that continuing to use GPS in the background can drastically

reduce battery life.

In general, the use of mobile phones on bicycles is prohibited.

The mobile phone may be attached to the handlebars when being

used as a navigation device. 'However, you must stop to (re-)enter

your address (and of course to make a phone call).

Before using the Coboc App on public roads, be sure to check the current

regulations in your country.

English

20

Battery & Charger

Your Coboc bike is equipped with a modern lithium-ion battery. This type

of battery offers the best state-of-the-art energy density, which means

maximum reach at minimum weight. Furthermore, lithium-ion batteries

have no memory effect. This battery has a nominal voltage of 36 volts and

a nominal capacity of 380 Wh.

The battery on your Coboc bike is installed into the bikes frame.

This way of installation allows for a very low vehicle weight while

providing ideal protection against moisture. The battery remains

in the frame even for charging. Only trained personnel is allowed to

remove the battery.

Do not remove the battery by yourself! Under no circumstances

should the cover at the bottom of the down tube be opened.

Only trained personnel should carry out maintenance or repairs

on the installed drive system. Carrying out maintenance or repairs may re-

sult in danger to life due to live parts such as cables and contacts. Further-

more, the drive system is being protected against moisture by a special

sealing technology, which is why warranty obligations become invalid if the

down tube is being opened without the approval by Coboc.

Range

The range of your Coboc bike is heavily dependent on various inuencing

factors and can therefore uctuate. These include the following factors,

among others: the type of surface, incline/slope of the route, wind condi-

tions, tire characteristics, air pressure, rider weight, cadence, riding speed

and temperature. The settings of the drive parameters also have an impact

on the range of your Coboc bike. Information about the Coboc app and

the setting of the individual drive parameters can be found here:

www.coboc.biz/en/the-coboc-app

With a fully charged battery and on level terrain, preset mode 1 (blue

LEDSs) can be used to achieve approx. 75-110 km. When riding on asphalt

roads, a low tire pressure can increase the rolling resistance and thus

reduce the range. Headwinds or hilly terrain will also have a negative im-

pact on the range. Increasing the drive parameters via the Coboc app will

Battery & Charger

express itself in stronger support but in return in a shorter range. A higher

total weight will also reduce the range of your Coboc bike. If you ride over

25km/h in return, the motor support is switched off and you ride your bike

like a normal bike. This increases the remaining range accordingly.

On hot days (battery temperature of more than 60° C) the battery turns its-

elf off for safety reasons. After that, it has to cool down before you are able

to use it again. If your bike has not been turned on or charged for more

than 30 days, it automatically sets itself into a deep sleep mode in order

to save battery power. If in deep sleep mode, your Coboc bike can not be

turned on. However, you can reactivate it rst by plugging in the charger.

Battery level is displayed on the user interface. Up to ve LEDs light up

after turning on the Coboc bike. They are split up as follows:

If more than one LED is ashing red this indicates an error within

the drive system. See chapter “Error codes” for more insight.

5 LEDs lit up Blue Battery Level 80 % to 100 %

4 LEDs lit up Blue Battery Level 60 % to 80 %

3 LEDs lit up Blue Battery Level 40 % to 60 %

2 LEDs lit up Blue Battery Level 20 % to 40 %

1 LEDs lit up Blue Battery Level 1 % to 20 %

Sidan laddas...

Coboc Seven Kallio Small E-Bike Bruksanvisning

Denna manual är också lämplig för

Coboc Seven Kallio Small E-Bike Bruksanvisning

på andra språk

Relaterade papper

Andra dokument