Yamaha S90 Användarmanual

How to Use This Manual

The S90 XS/S70 XS Reference Manual created via the PDF format is equipped with special features that

are exclusive to electronic files, such as the Link function and the Search function which let you jump to

the desired page by clicking the specific term.

The list indicated at the right of each page is equivalent to the table of contents.

By clicking the desired item from this list, you can jump to the corresponding page.

The list in the “Reference” section is equivalent to the function tree of this instrument, which allows you

to find desired parameters easily.

If you come across an unfamiliar parameter on the instrument’s display, find the corresponding

parameter from this list then click it to call up the page which describes the parameter in detail.

This function built in the viewer software is very useful if you want to know the meaning of unfamiliar

terms.

When using Adobe Reader to read this manual, enter a specific word in the search box, then press the

<Enter> key of your computer keyboard to call up the relevant section in this manual.

NOTE

Make sure to check and download the latest version of the Adobe Reader from the following site.

http://www.adobe.com/products/reader/

When using Adobe Reader, click to return to the previous page view/go to the next page view via the

buttons in the toolbar.

This function is very useful if you want to return to the previous page view when jumping to a link page.

NOTE

If the previous page view/next page view buttons are not shown in the toolbar, hold the <Alt> key and press

<>/<> keys to move to the previous/next page view.

NOTE For more information on these and other functions in the software, refer to the owner’s manual of the software.

Contents List

Search Function

Previous Page View/Next Page View

Reference Manual

Example: Reference section,

Performance mode

Modes

Current mode

Current

displays

Displays

Reference Manual

Basic Structure

2

Basic Structure

Functional Blocks

Tone Generator

A/D Input

Arpeggio

Sequencer

Audio Record/Play

Controller

Effect

Internal Memory

Reference

Voice

Performance

Multi

SEQ Play

Master

Remote

File

Audio Rec/Play

Utility

Appendix

About MIDI

Display Messages

Troubleshooting

Basic Structure

The Seven Functional Blocks

The S90 XS/S70 XS system consists of seven main functional blocks: Tone Generator, A/D Input, Sequencer, Arpeggio,

Controller, Effect, and Audio Record/Playback.

AWM2 (Advanced Wave Memory 2)

This instrument is equipped with an AWM2 tone generator block. AWM2 (Advanced Wave Memory 2) is a

synthesis system based on sampled waves (sound material), and is used in many Yamaha synthesizers. For extra

realism, each AWM2 Voice uses multiple samples of a real instrument’s waveform. Furthermore, a wide variety of

parameters—envelope generator, filter, modulation, and others—can be applied.

S90 XS/S70 XS

Controller block

(page 13)

Keyboard

Controllers

Tone Generator

block (page 3)

AWM2 Tone Generator

16 Parts

Voices, Performances,

Multis

Arpeggio block

(page 7)

Arpeggio playback x 4

Sequencer block

(page 12)

Effect block

(page 14)

A/D Input block

(page 7)

MIC Input

Audio Record/

Playback

block

(page 12)

MIDI message flow

Audio signal flow

MIDI Output MIDI Input A/D Input Audio Output

16 track MIDI Sequencer

(playback only)

System Effect

Insertion Effect x 3

Element EQ

Part EQ

Master Effect

Master EQ

USB, MIDI USB, MIDI MIC INPUT OUTPUT,

ASSIGNABLE OUTPUT

Reference Manual

Basic Structure

3

Basic Structure

Functional Blocks

Tone Generator

A/D Input

Arpeggio

Sequencer

Audio Record/Play

Controller

Effect

Internal Memory

Reference

Voice

Performance

Multi

SEQ Play

Master

Remote

File

Audio Rec/Play

Utility

Appendix

About MIDI

Display Messages

Troubleshooting

Tone Generator Block

The tone generator block is what actually produces sound in response to the MIDI messages received from the

Sequencer block, the Controller block, the Arpeggio block and from the external MIDI instrument via the MIDI IN

connector or the USB connector. The MIDI messages are assigned to sixteen independent channels, and this

synthesizer is capable of simultaneously playing sixteen separate parts, via the sixteen MIDI channels. However, the

sixteen-channel limit can be overcome by using separate MIDI “ports,” each supporting sixteen channels. The tone

generator block of this instrument can handle MIDI messages over Port 1. The structure of the tone generator block

differs depending on the mode.

Tone Generator Block in the Voice Mode

Only one MIDI channel can be recognized in the Voice mode because only one part is available in this

mode. This status is referred to as a “single timbre” tone generator. A Voice is played from the keyboard,

using a single part.

To set the MIDI receive channel for single timbre operation (Voice and Performance modes), use the

Basic Receive Ch parameter (page 137) in the Utility MIDI display. In the Voice mode, the instrument

recognizes only data over MIDI Port 1.

NOTE

If you want to play song data on an external MIDI sequencer or computer consisting of multiple MIDI

channels, make sure to use the Multi mode (page 6).

A program that contains the sonic elements for generating a specific musical instrument sound is

referred to as a “Voice.” Internally, there are two Voice types: Normal Voices and Drum Voices. Normal

Voices are mainly pitched musical instrument type sounds that can be played over the range of the

keyboard.

Each Voice consists of up to eight Elements (Normal Voice) or up to 73 keys (Drum Voice).

An Element or Drum Key is the basic and the smallest unit for a Voice. This means that only one Element

or key can produce the musical instrument sound. In addition, a Normal Voice can produce the realistic

sound or various types of sound by combining multiple Elements. Each Voice is created by editing

parameters unique to each element/key (Element Edit parameters/Key Edit parameters) and

parameters common to all the elements/keys (Common Edit parameters). In Element Edit and Key Edit,

you can edit the parameters only on the S90 XS/S70 XS Editor.

NOTE

For instructions on editing a Normal Voice, see page 34. For instructions on editing a Drum Voice, see page

58.

Normal Voices

This is a Voice which is played conventionally from

the keyboard, with standard pitches sounding for

each key. A Normal Voice consists of up to eight

Elements. Depending on the settings in the Voice

Edit mode, these Elements are sounded

simultaneously, or the different Elements are

sounded according to the note range, velocity

range and the XA (Expanded Articulation) settings.

The illustration is an example of a Normal Voice. Since the six Elements here are distributed across both

the note range of the keyboard and the velocity range, a different Element sounds depending on which

note you play and how strongly you play it. In the note distribution, Elements 1 and 2 sound in the lower

range of the keyboard, Elements 3 and 4 sound in the middle range, and Elements 5 and 6 sound in the

higher range. In the velocity distribution, Elements 1, 3 and 5 sound when playing the keyboard softly,

while Elements 2, 4 and 6 sound when playing it strongly. In a practical example of this in use, a piano

Voice could be composed of six different samples. Elements 1, 3 and 5 would be the sounds of the

piano played softly, over the respective note ranges, while Elements 2, 4 and 6 would be strongly

played sounds, for each respective note range. Actually, the S90 XS/S70 XS is even more flexible than

this, since it allows up to eight independent Elements.

Part structure in the Voice mode

Voice

Normal Voices & Drum Voices

Velocity

Element 2

Element 1

Element 4

Element 3

Element 6

Element 5

Reference Manual

Basic Structure

4

Basic Structure

Functional Blocks

Tone Generator

A/D Input

Arpeggio

Sequencer

Audio Record/Play

Controller

Effect

Internal Memory

Reference

Voice

Performance

Multi

SEQ Play

Master

Remote

File

Audio Rec/Play

Utility

Appendix

About MIDI

Display Messages

Troubleshooting

Drum Voice

Drum Voices are mainly percussion/drum sounds that are assigned to individual notes on the keyboard.

A collection of assigned percussion/drum waves or Normal Voices is known as a Drum Kit.

Unlike Elements, the Drum key is equivalent to the corresponding note, meaning that you cannot

change its range. Drum or percussion sounds are assigned to each Drum Key. You can create various

types of Drum Voices by changing the drum or percussion sound assigned to each key and edit the

parameters such as pitch and EG.

Expanded Articulation (XA) is a specially designed tone generation system that provides greater

performance flexibility and acoustic realism.

This feature, adopted from the MOTIF XS synthesizer, allows you to more effectively recreate realistic

sound and natural performance techniques—such as legato and staccato—and provides other unique

modes for random and alternate sound changes as you play.

Realistic legato performance

Conventional synthesizers recreate a legato effect by continuing the volume envelope of a previous note

on to the next one, in the mono mode. However, this results in an unnatural sound different from that of

an actual acoustic instrument. Like the technology of the MOTIF XS series, the S90 XS/S70 XS more

accurately reproduces a legato effect by allowing specific Elements to be sounded when playing legato

and other Elements to be played normally (with the XA Control parameter settings “normal” and

“legato”).

Authentic note release sound

Conventional synthesizers are not good at realizing the sound produced when the note of the acoustic

instrument is released. The S90 XS/S70 XS realizes the sound produced when the note of the acoustic

instrument is released, by setting the XA Control parameter of a certain Element to “key off sound.”

Subtle sound variations for each note played

Conventional synthesizers attempt to reproduce this by randomly changing the pitch and/or filter.

However, this produces an electronic effect and is different from the real sound changes on an acoustic

instrument. The S90 XS/S70 XS more accurately reproduces these subtle sound variations by using the

XA Control parameter settings, “wave cycle” and “wave random.”

Switching among different sounds to recreate the natural performance on an

acoustic instrument

Acoustic instruments have their own unique characteristics—even specific, unique sounds that are

produced only at certain times in a performance. These include the flutter tonguing on a flute or the

playing of high harmonics on an acoustic guitar. Conventional synthesizers (before the MOTIF XS

series) could realize such sounds, for example, by triggering them through high (strong) velocity. The

S90 XS/S70 XS, on the other hand, recreates these special sounds by allowing you to switch between

the sounds while you play-using the ASSIGNABLE FUNCTION buttons and the XA Control parameter

settings, “AF 1 on,” “AF 2 on” and “all AF off.” This gives you a level of natural, expressive control

previously unavailable.

NOTE

You can turn the ASSIGNABLE FUNCTION [1]/[2] button on or off also by transmitting the Control Change

number specified as “A Func 1/2 Ctrl No.” (page 139) in the Utility Controller display from an external device.

New sounds and new styles of playing

The highly versatile functions above can be applied effectively not only to acoustic sounds but also to

synthesizer and electronic Voices as well. The XA feature opens up enormous potential for realizing

authentic sounds, performing expressively and coming up with creative new styles of playing.

Expanded Articulation (XA)

C0

C1 C6

Individual drum sounds

(different for each key)

Key 1 Key 5 Key 10 Key 18 Key 73

Reference Manual

Basic Structure

5

Basic Structure

Functional Blocks

Tone Generator

A/D Input

Arpeggio

Sequencer

Audio Record/Play

Controller

Effect

Internal Memory

Reference

Voice

Performance

Multi

SEQ Play

Master

Remote

File

Audio Rec/Play

Utility

Appendix

About MIDI

Display Messages

Troubleshooting

Elements and Drum Keys are the smallest “building blocks” in this synthesizer that comprise a Voice; in

fact, only one Element or one Drum Key could be used to create a Voice. These small sound units can

be built, enhanced and processed by a variety of traditional synthesizer parameters, such as Oscillator,

Pitch Filter, Amplitude, and LFO (shown below).

IMPORTANT

In Element Edit and Key Edit, you can edit the parameters only on the S90 XS/S70 XS Editor installed to your

computer connected to the S90 XS/S70 XS.

Oscillator

This unit outputs waves which determine the basic pitch. From the Oscillator setup window of the S90

XS/S70 XS Editor, you can assign a waveform (the basic sound “building block”) to each Element of a

Normal Voice or each Key of a Drum Voice. In the case of a Normal Voice, you can set the note range for

the Element (the range of notes on the keyboard over which the Element will sound) as well as the

velocity response (the range of note velocities within which the Element will sound). In addition, the XA

related parameters can be set in this unit.

Each waveform consists of the sample(s) created by recording the actual instrument's sound and

assigned to the set(s) of the keyboard and velocity.

For information on the Oscillator parameters, refer to pages 46 and 60.

Pitch

This unit controls the pitch of the sound (wave) output from the Oscillator. In the case of a Normal Voice,

you can detune separate Elements, apply Pitch Scaling and so on. Also, by setting the PEG (Pitch

Envelope Generator), you can control how the pitch changes over time. Pitch-related parameters can

be set on the S90 XS/S70 XS Editor.

For details, refer to pages 47, 48, and 61.

Filter

This unit modifies the tone of the sound output from Pitch by cutting the output of a specific frequency

portion of the sound. Also, by setting the FEG (Filter Envelope Generator), you can control how the

Cutoff Frequency of the Filter changes over time. The Filter parameters can be set from the S90 XS/S70

XS Editor.

For details, refer to pages 50, 51, 53 and 61.

Amplitude

This unit controls the output level (amplitude) of the sound output from the Filter block. The signals are

then sent at this level to the Effect block. Also, by setting the AEG (Amplitude Envelope Generator), you

can control how the volume changes over time. The Amplitude parameters can be set from the S90 XS/

S70 XS Editor.

For details, refer to pages 53, 55, 62 and 62.

Elements and Drum Keys

OSC

(Oscillator)

LFO

Low Frequency

Oscillator

PITCH

Controls the pitch

of the sound.

FILTER

Changes the tonal

quality of the sound

output from the

PITCH unit.

Waveform

(AWM2)

AMP

Controls the output level

(amplitude) of the sound

output from the FILTER

unit. The signals are then

sent at this level to the

Effect block.

Pitch EG

(Pitch Envelope

Generator)

Filter EG

(Filter Envelope

Generator)

Amplitude EG

(Amplitude Envelope

Generator)

Reference Manual

Basic Structure

6

Basic Structure

Functional Blocks

Tone Generator

A/D Input

Arpeggio

Sequencer

Audio Record/Play

Controller

Effect

Internal Memory

Reference

Voice

Performance

Multi

SEQ Play

Master

Remote

File

Audio Rec/Play

Utility

Appendix

About MIDI

Display Messages

Troubleshooting

LFO (Low Frequency Oscillator)

As its name suggests, the LFO produces a low frequency wave.

These waves can be used to vary the pitch, filter or amplitude of each Element to create effects such as

vibrato, wah and tremolo. LFO can be set independently for each Element; it can also be set globally for

all Elements. The LFO parameters can be set from the S90 XS/S70 XS Editor.

For details, refer to pages 40

and

56

.

Normal Voice

Preset Banks 1 – 8 1024 Normal Voices (128 Voices for each Bank)

GM Bank 128 Voices

User Banks 1 – 4 512 Voices (128 Voices for each Banks)

Drum Voice

Preset Drum Bank 64 Voices

GM Drum Bank 1 Voice

User Drum Bank 32 Voices

Tone Generator Block in the Performance Mode

In this mode, the tone generator block receives MIDI data over a single channel. This status is referred

to as a “single timbre” tone generator. This mode lets you play a Performance (which multiple Voices

(Parts) are combined—in a layer, or in other configurations) using the keyboard. Keep in mind that song

data on an external sequencer consisting of multiple MIDI channels will not play back properly in this

mode. If you are using an external MIDI sequencer or computer to play the instrument, make sure to use

the Multi mode.

A program in which multiple Voices (Parts) are combined in a layer, or in other configurations is referred

to as a “Performance.” Each Performance can contain up to four different Parts (Voices). Each

Performance can be created by editing parameters unique to each Part and parameters common to all

the Parts in the Performance mode (page 69).

Four User Banks are provided. Each Bank contains 128 Performances. Accordingly, a total of 512 User

Performances are provided.

Tone Generator Block in the Multi Mode

The Multi mode lets you use 16 Parts and assign different Voices to be played back for each Part. Since

different MIDI channels can be set for each Part of the tone generator block, you can use an external

MIDI sequencer or computer to play the sounds. The sequence data of each track plays the

corresponding Parts (those having the same MIDI channel assignment) in the tone generator block. A

MIDI tone generator that simultaneously receives over multiple MIDI channels and plays multiple

instrument Parts is referred to as a “multi-timbral” tone generator.

To play the tone generator block in the Multi mode, set the Port of the external sequencer to 1 then set

the MIDI Receive Channel of each Part as “Receive Ch” (page 101) in the Voice display of the Multi Part

Edit.

Memory structure of Voice

Part structure in the Performance mode

Performance

Memory structure of Performance

Part structure in the Multi mode

Reference Manual

Basic Structure

7

Basic Structure

Functional Blocks

Tone Generator

A/D Input

Arpeggio

Sequencer

Audio Record/Play

Controller

Effect

Internal Memory

Reference

Voice

Performance

Multi

SEQ Play

Master

Remote

File

Audio Rec/Play

Utility

Appendix

About MIDI

Display Messages

Troubleshooting

A program in which multiple Voices are assigned to Parts for multi-timbral play in the Multi modes is

referred to as a “Multi.” Each Multi can contain up to 16 Parts.

128 Multi programs are provided in the User Bank.

A/D Input Block

This block handles the audio signal input from the MIC INPUT jack. Audio Signals from the MIC INPUT jack can be

transmitted to the Insertion Effect, System Effect, Master Effect, and Master EQ of the Effect Block.

The A/D Input related parameters can be set in the following display.

Arpeggio Block

This function lets you automatically trigger musical and rhythmic phrases using the current Voice by simply pressing a

note or notes on the keyboard. The Arpeggio sequence also changes in response to the actual notes or chords you

play, giving you a wide variety of inspiring musical phrases and ideas—both in composing and performing. Four

Arpeggio types can be played back at the same time even in the Song mode and Pattern mode.

Arpeggio Category

The Arpeggio types are divided into 18 categories as listed below. The categories are based on the musical instrument.

Category List

NOTE Categories named “GtMG” and “BaMG” include Arpeggio types appropriate for using with a Mega Voice.

Multi

Memory structure of Multi

Maximum Polyphony

Maximum polyphony refers to the highest number of notes that can be sounded simultaneously from the

internal tone generator of the instrument.

The maximum polyphony of this synthesizer is 128. When the internal tone generator block receives a

number of notes exceeding the maximum polyphony, previously played notes are cut off. Keep in mind

this may be especially noticeable with Voices not having decay.

Furthermore, the maximum polyphony applies to the number of Voice Elements used, not the number of

Voices. When Normal Voices that include up to eight Elements are used, the maximum number of

simultaneous notes may be less than 128.

Mode Display Pages

Voice Voice A/D Out display and Voice A/D FX display in the Utility mode Pages 140 and 141

Performance A/D Out display and A/D FX display in the Performance Common Edit Pages 78 and 79

Multi A/D Out display and A/D FX display in the Multi Common Edit Pages 98 and 99

ApKb Acoustic Piano & Keyboard Lead Synth Lead

Organ Organ PdMe Synth Pad / Musical Effect

GtPl Guitar / Plucked CPrc Chromatic Percussion

GtMG Guitar for “MegaVoice” DrPc Drum / Percussion

Bass Bass Seq Synth Seq

BaMG Bass for “MegaVoice” Chord Chord Seq

Strng Strings Hybrd Hybrid Seq

Brass Brass Cntr Control

RdPp Reed / Pipe DrEnd Drum Ending

Reference Manual

Basic Structure

8

Basic Structure

Functional Blocks

Tone Generator

A/D Input

Arpeggio

Sequencer

Audio Record/Play

Controller

Effect

Internal Memory

Reference

Voice

Performance

Multi

SEQ Play

Master

Remote

File

Audio Rec/Play

Utility

Appendix

About MIDI

Display Messages

Troubleshooting

Sub Category

The Arpeggio categories are divided into sub categories as listed below. Because the sub categories are listed based

on the music genre, it is easy to find the sub category appropriate for your desired music style.

Sub Category List

NOTE Arpeggio types belonging to the Sub Categories marked with an asterisk (*) contain certain velocity ranges,

to each of which a different phrase is assigned. When a type of these categories is selected in the Voice

mode, it is a good idea to set the Velocity Limit of each Element to the same range as below.

Velocity ranges of each Arpeggio type

2Z_*****: 1 – 90, 91 – 127

4Z_*****: 1 – 70, 71 – 90, 91 – 110, 111 – 127

8Z_*****: 1 – 16, 17 – 32, 33 – 48, 49 – 64, 65 – 80, 81 – 96, 97 – 108, 109 – 127

PadL_*****: 1 – 1, 2 – 2, 3 – 127

PadH_*****: 1 – 112, 113 – 120, 121 – 127

Arpeggio Type Name

The Arpeggio Types are named according to certain rules and abbreviations. Once you understand these rules and

abbreviations, you will find it easy to browse through and select the desired Arpeggio Types.

Arpeggio type with “_ES” at the end of the type name (example: HipHop1_ES)

These Arpeggio types use the same multi track Arpeggio architecture as the MOTIF ES. This ES type of

arpeggio has the following benefits: These arpeggios can create complex notes and chords even when

triggered by one note. The arpeggio closely follows the notes played on the keyboard (but the area

where the arpeggio is assigned) allowing a good deal of harmonic freedom and the possibility to “solo”

using these arpeggios. For details, see page 11.

Arpeggio type with “_XS” at the end of the type name (example: Rock1_XS)

These Arpeggios use a newly developed chord recognition technology to determine what notes should

be played back by the Arpeggio. This XS type of arpeggio has the following benefits: The arpeggios

respond only to any area on the keyboard where an XS type of arpeggio is assigned. Other areas of the

keyboard do not effect the chord recognition. This allows very natural keyboard playing across the

entire keyboard with arpeggio generated bass and backing parts. The arpeggio will always play

harmonically correct parts. These are especially useful for bass and chordal backing parts. See page

11 for more details.

Arpeggio type with a normal name (example: UpOct1)

In addition to the above types, there are three playback types: the Arpeggios created for use of Normal

Voices and played back using only the played notes and their octave notes (page 11), the Arpeggios

created for use of Drum Voices (page 11), and Arpeggios containing mainly non-note events (page 12).

Mega Voices and Mega Voice Arpeggios

Normal Voices use velocity switching to make the sound quality and/or level of a Voice change

according to how strongly or softly you play the keyboard. This makes these Voices respond naturally.

However Mega Voices have a very complex structure with many different layers that are not suitable for

playing manually. Mega Voices were developed specifically to be played by Mega Voice arpeggios to

produce incredibly realistic results. You should always use Mega Voices with Mega Voice Arpeggios

(included in “GtMG” and “BaMG” category). For information about the Arpeggio type appropriate for

each Mage Voice, refer to the Voice Type of the Arpeggio Type list in the Data List (separate PDF

documentation).

Rock Rock Z.Pad Zone Velocity for Pad*

R&B R&B Filtr Filter

Elect Electronic Exprs Expression

Jazz Jazz Pan Pan

World World Mod Modulation

Genrl General Pbend Pitch Bend

Comb Combination Asign Assign 1/2

Zone Zone Velocity*

Reference Manual

Basic Structure

9

Basic Structure

Functional Blocks

Tone Generator

A/D Input

Arpeggio

Sequencer

Audio Record/Play

Controller

Effect

Internal Memory

Reference

Voice

Performance

Multi

SEQ Play

Master

Remote

File

Audio Rec/Play

Utility

Appendix

About MIDI

Display Messages

Troubleshooting

How to Use the Arpeggio Type List

The Arpeggio Type list in the Data List (separate PDF documentation) contains the following columns.

NOTE

Note that this list is for illustration purposes only. For a complete listing of the Arpeggio Types, refer to the Data List (separate

PDF documentation).

1 Main Category

Indicates an Arpeggio Category.

2 Sub Category

Indicates an Arpeggio Sub Category.

3 ARP No (Arpeggio Number)

Indicates the number of the Arpeggio type.

4 ARP Name (Arpeggio Name)

Indicates the Arpeggio Name.

5 Time Signature

Indicates the time signature or meter of the Arpeggio type.

6 Length

Indicates the data length (amount of measures) of the Arpeggio type. When the Loop parameter* is

set to “off,” the Arpeggio plays back for this length and stops.

7 Original Tempo

Indicates the appropriate tempo value of the Arpeggio type. Note that this tempo is not set

automatically when selecting an Arpeggio type.

8 Accent

The circle indicates that the Arpeggio uses the Accent Phrase feature (page 10).

9 Random SFX

The circle indicates that the Arpeggio uses the SFX feature (page 10).

) Voice Type

Indicates the voice type appropriate for the Arpeggio Type.

When the Voice With Arpeggio parameter (page 104) is set to “on” in the Arp Edit display of the

Multi Part Edit mode, the voice of this type is automatically selected.

*The “Loop” can be set in the Arp Edit display (page 36) of the Voice Edit, Arp Edit display (page 84) of the

Performance Part Edit and Arp Edit display (page 104) of the Multi Part Edit.

Main

Category

ARP

No.

ARP Name

Time

Signature

Length

Original

Tempo

Accent

Random

SFX

Voice Type

ApKb Rock 1 70sRockB 4 / 4 2 130 Acoustic Piano

ApKb Rock 2 70sRockC 4 / 4 1 130 :

ApKb Rock 3 70sRockD 4 / 4 2 130

ApKb Rock 4 70sRockE 4 / 4 4 130

ApKb Rock 5 70sRockF 4 / 4 2 130

ApKb Rock 6 70sRockG 4 / 4 1 130

ApKb Rock 7 70sRockH 4 / 4 1 130

Reference Manual

Basic Structure

10

Basic Structure

Functional Blocks

Tone Generator

A/D Input

Arpeggio

Sequencer

Audio Record/Play

Controller

Effect

Internal Memory

Reference

Voice

Performance

Multi

SEQ Play

Master

Remote

File

Audio Rec/Play

Utility

Appendix

About MIDI

Display Messages

Troubleshooting

Arpeggio Related Settings

There are several methods for triggering and stopping the Arpeggio playback. In addition, you can set whether or not

SFX sounds and special Accent Phrases are triggered along with the normal sequence data. This section covers the

Arpeggio related parameters which can be set in the Voice, Performance, and Multi modes.

The following operations are available.

NOTE

The Hold and Trigger Mode can be set in the Arp Edit display (page 36) of the Voice Edit, Arp Edit display

(page 84) of the Performance Part Edit and Arp Edit display (page 104) of the Multi Part Edit.

NOTE When receiving the MIDI sustain message (control #64) with “Arp Sw” set to “on,” you can obtain the same

result by setting “Arp Hold” to “on.”

Accent Phrases are composed of sequence data included in some Arpeggio types, sounding only

when you play notes at a velocity higher (stronger) than that specified in the Accent Velocity Threshold

parameter.

If it is hard to play at velocities necessary to trigger the Accent Phrase, set the Accent Velocity

Threshold parameter to a lower value.

NOTE

The “Accnt Vel Th (Accent Velocity Threshold)” can be set in the Arp Edit display (page 36) of the Voice Edit,

Arp Edit display (page 84) of the Performance Part Edit and Arp Edit display (page 104) of the Multi Part Edit.

NOTE For information on Arpeggio types that use this function, refer to the Arpeggio Type List in the Data List

(separate PDF documentation).

Some Arpeggio types feature a Random SFX function which will trigger special sounds (such as guitar

fret noises) when the note is released. The following parameters affecting Random SFX are provided.

NOTE

The “Random SFX,” “SFX Vel Offset,” and “SFX Key on Ctrl” can be set in the Arp Edit display (page 36) of the

Voice Edit, Arp Edit display (page 84) of the Performance Part Edit and Arp Edit display (page 104) of the

Multi Part Edit.

NOTE For information on Arpeggio types that use this function, refer to the Arpeggio Type List in the Data List

(separate PDF documentation).

Turning Arpeggio playback on/off

To play the Arpeggio only when the note is pressed: “Hold”=”off,” “Trigger Mode”=”gate”

To continue the Arpeggio even if the note is released: “Hold”=”on,” “Trigger Mode”=”gate”

To toggle the Arpeggio playback on/off whenever the

note is pressed:

“Trigger Mode”=”toggle” (The Hold parameter can be set

to either “on” or “off.”)

Accent Phrase

Random SFX

For turning the Random SFX on/off: Random SFX

For setting the volume of the SFX sound: SFX Vel Offset

For determining whether or not the volume of the SFX

sound is controlled by velocity:

SFX Key on Ctrl

Reference Manual

Basic Structure

11

Basic Structure

Functional Blocks

Tone Generator

A/D Input

Arpeggio

Sequencer

Audio Record/Play

Controller

Effect

Internal Memory

Reference

Voice

Performance

Multi

SEQ Play

Master

Remote

File

Audio Rec/Play

Utility

Appendix

About MIDI

Display Messages

Troubleshooting

Arpeggio Playback Types

The Arpeggio playback features three main playback types as described below.

Arpeggio types (belonging to the categories except for the DrPC and Cntr) created for use of Normal

Voices have the following three playback types.

Playback only of the played notes

The Arpeggio is played back using only the played note and its octave notes.

Playback of a programmed sequence according to the played notes

These Arpeggio types have the several sequences each of which is suited for a certain chord type.

Even if you press only one note, the Arpeggio is played back using the programmed sequence—

meaning that notes other than the ones you play may be sounded. Pressing another note triggers the

transposed sequence regarding the pressed note as a root note. Adding notes to those already held

changes the sequence accordingly. An Arpeggio with such a playback type has “_ES” at the end of the

type name.

Playback of a programmed sequence according to the played chord

These Arpeggio types created for use with Normal Voices are played back to match the chord type

determined by detecting the notes you play on the keyboard. An Arpeggio with such a playback type

has “_XS” at the end of the type name.

NOTE

When the Key Mode parameter is set to “sort” or “sort+direct,” the same sequence is played back no matter

what order you play the notes. When the Key Mode parameter is set to “thru” or “thru+direct,” a different

sequence is played back depending on the order you play the notes.

NOTE Since these types are programmed for Normal Voices, using them with Drum Voices may not give musically

appropriate results.

These arpeggio types are programmed specifically for use with Drum Voices, giving you instant access

to various rhythm patterns. Three different playback types are available.

Playback of a drum pattern

Pressing any note(s) will trigger the same rhythm pattern.

Playback of a drum pattern, plus additional played notes (assigned drum

instruments)

Pressing any note will trigger the same rhythm pattern. Adding notes to the one already held produces

additional sounds (assigned drum instruments) for the drum pattern.

Playback only of the played notes (assigned drum instruments)

Playing a note or notes will trigger a rhythm pattern using only the notes played (assigned drum

instruments). Adding notes to the one already held produces additional sounds (assigned drum

instruments) for the drum pattern. Keep in mind that even if you play the same notes, the triggered

rhythm pattern differs depending on the order of the notes played. This gives you access to different

rhythm patterns using the same instruments simply by changing the order in which you play the notes

when the Key Mode parameter is set to “thru” or “thru+direct.”

NOTE

The three playback types above are not distinguished by category name or type name. You’ll have to actually

play the types and hear the difference.

NOTE Since these types are programmed for Drum Voices, using them with Normal Voices may not give musically

appropriate results.

Arpeggios for Normal Voices

Arpeggios for Drum/Percussion Voices—Category: DrPc, DrEnd

Reference Manual

Basic Structure

12

Basic Structure

Functional Blocks

Tone Generator

A/D Input

Arpeggio

Sequencer

Audio Record/Play

Controller

Effect

Internal Memory

Reference

Voice

Performance

Multi

SEQ Play

Master

Remote

File

Audio Rec/Play

Utility

Appendix

About MIDI

Display Messages

Troubleshooting

These arpeggio types are programmed primarily with Control Change and Pitch Bend data.

They are used to change the tone or pitch of the sound, rather than play specific notes. In fact, some

types contain no note data at all. When using a type of this category, set the Key Mode parameter to

“direct,” “thru+direct,” or “sort+direct.”

NOTE

The “Key Mode” can be set in the Arp Edit display (page 36) of the Voice Edit, Arp Edit display (page 84) of

the Performance Part Edit and Arp Edit display (page 104) of the Multi Part Edit.

Sequencer Block

This block lets you play the Standard MIDI file including the 16 parts in the Multi/Sequence Play mode. The MIDI

messages played in the Sequencer block will be transmitted to the tone generator block.

Audio Recording/Playback Block

This block lets you record your keyboard performance as audio data to the USB storage device or internal flash memory

and play back the recorded audio data.

Audio Recording

The sound output from the tone generator block of this instrument and the sound input via the MIC INPUT jack will be

transferred to the Effect block then recorded as audio data. The audio data is recorded and saved as the WAVE file

(44.1kHz/16-bit/stereo).

Audio Playback

You can directly play back the files stored on the internal flash memory or saved on the external USB storage device.

The playback sound will bypass the Effect block before being output.

Arpeggios containing mainly non-note events—Category: Cntr

Tips for Arpeggio playback

It not only provides inspiration and full rhythmic passages over which you can perform, it gives you

quality MIDI data you can use in creating songs, or fully formed backing parts to be used in your live

performances. For details, refer to “Arpeggio” in the printed Owner's Manual.

Reference Manual

Basic Structure

13

Basic Structure

Functional Blocks

Tone Generator

A/D Input

Arpeggio

Sequencer

Audio Record/Play

Controller

Effect

Internal Memory

Reference

Voice

Performance

Multi

SEQ Play

Master

Remote

File

Audio Rec/Play

Utility

Appendix

About MIDI

Display Messages

Troubleshooting

Controller Block

This block consists of the keyboard, Pitch Bend and Modulation Wheels, Ribbon Controller, Knobs, Sliders and so on.

The keyboard itself doesn’t generate sounds, but instead generates/transmits note on/off, velocity and other information

(MIDI messages) to the synthesizer's tone generator block when you play notes. The controllers also generate/transmit

MIDI messages. The synthesizer's tone generator block produces the sound according to the MIDI messages

transmitted from the keyboard and controllers.

Keyboard

The keyboard transmits the note on/off messages to the Tone Generator Block (for sounding). The keyboard is also used

for triggering Arpeggio playback. You can change the note range of the keyboard in octaves by using the OCTAVE [+]/

[-] buttons, transpose the notes by using the TRANSPOSE [-]/[+] buttons and set (in the General display of the Utility

mode) how the actual velocity is generated according to the strength with which you play notes.

Pitch Bend Wheel

Use the Pitch Bend wheel to bend notes up (roll the wheel away from you) or down

(roll the wheel toward you) while playing the keyboard. Move the wheel up or down

to bend the pitch up or down. This wheel is self-centering and will automatically

return to normal pitch when released. Each preset Voice has its own default Pitch

Bend Range setting. The Pitch Bend Range setting for each Voice can be

changed in the Play Mode display (page 34) of the Voice Edit mode. From this

display you can also reverse the Pitch Bend function—so that moving the wheel

up lowers the pitch, and moving it down raises the pitch. Functions other than Pitch Bend can be assigned to the Pitch

Bend wheel in the Controller display (page 39) of the Voice Edit mode.

Modulation Wheel

Even though the Modulation wheel is conventionally used to apply vibrato to the

sound, many of the preset Voices have other functions and effects assigned to the

wheel.

The more you move this wheel up, the greater the effect that is applied to the

sound. To avoid accidentally applying effects to the current Voice, make sure the

Modulation wheel is set to minimum before you start playing. Various functions

can be assigned to the Modulation wheel in the Controller display (page 39) of the

Voice Edit mode.

Assignable Function Buttons

According to the XA Mode (Expanded Articulation Mode) settings (page 4), you can call up specific Elements of the

selected Voice by pressing each of these buttons during your keyboard performance. Assignable functions can be set

on the S90 XS/S70 XS Editor. You can select how the on/off status of these buttons is switched by using the Assignable

Function 1 Mode and Assignable Function 2 Mode parameters in the Controller display (page 39) of the Voice Edit

mode. Furthermore, you can assign various functions to these buttons (other than calling up specific Elements).

Knob/Slider

These four knobs let you change various aspects of the Voice's sound in real time—while you play. The four sliders let

you adjust the volume of the Voice Elements, Performance Parts and Mixing Parts.

DAW Remote

Press the [DAW REMOTE] button to enter the Remote mode. Entering the Remote mode will change the functions of the

panel buttons—with the exception of [MIC INPUT ON/OFF], OCTAVE [+]/[-] buttons, TRANSPOSE [+]/[-] buttons and

[UTILITY] buttons—to those exclusive to this mode. For details, refer to page 123.

Pitch Up

Pitch Down

Maximum

Minimum

Reference Manual

Basic Structure

14

Basic Structure

Functional Blocks

Tone Generator

A/D Input

Arpeggio

Sequencer

Audio Record/Play

Controller

Effect

Internal Memory

Reference

Voice

Performance

Multi

SEQ Play

Master

Remote

File

Audio Rec/Play

Utility

Appendix

About MIDI

Display Messages

Troubleshooting

Effect Block

This block applies effects to the output of the tone generator block, and audio input block, processing and enhancing

the sound. Effects are applied in the final stages of editing, letting you change the sound as desired.

Effect Structure

System Effects are applied to the overall sound. With System Effects, the sound of each Part is sent to

the effect according to the Effect Send Level for each Part. The processed sound (referred to as “wet”)

is sent back to the mixer, according to the Return Level, and output—after being mixed with the

unprocessed “dry” sound.

This instrument is equipped with the Reverb and Chorus as System Effects.

In addition, you can set the Send Level from Chorus to Reverb. This parameter is used to apply the

Reverb to the signals output from the Chorus. You can get the natural effect by applying the Reverb

depth to the Chorus sound with the same level as that of the dry sound.

Insertion Effects can be applied individually to each Part. Insertion Effects are mainly used to directly

process a single Part, Voice. Each Voice features one set of Insertion effects (A and B units). The

different Effects can be assigned to the A and B respectively on the Effect Parameter display (page 45)

of the Voice Edit.

This instrument features eight sets of Insertion Effects (each set has two units, A and B). They can be

applied to a maximum of eight Parts selectable from Parts 1 – 16 and A/D Input Part in the Multi mode.

This block applies effects to the final stereo output signal of the entire sound. Multiple Effect types are

available.

The Element EQ is applied to each Element of the Normal Voice and each key of the Drum Voice. You

can specify which shape is used among three types: Parametric EQ of 2-band shelving type,

Parametric EQ of 1-band peaking type and boost EQ. These parameters can be set only on the S90 XS/

S70 XS Editor.

The Part EQ, the 3-band parametric EQ, is applied to each Voice or each part of the Multi. The high

band and low band are the shelving type. The middle band is the peaking type. The Common EQ

parameters offset the settings of the Part EQ parameters.

Master EQ is applied to the final (post-effect), overall sound of the instrument. In this EQ, all five bands

can be set to peaking, or the lowest and highest bands can also be set to shelving.

System Effects—Reverb and Chorus

Insertion Effect

Master Effect

Element EQ

Common EQ/Part EQ

Master EQ

Reference Manual

Basic Structure

15

Basic Structure

Functional Blocks

Tone Generator

A/D Input

Arpeggio

Sequencer

Audio Record/Play

Controller

Effect

Internal Memory

Reference

Voice

Performance

Multi

SEQ Play

Master

Remote

File

Audio Rec/Play

Utility

Appendix

About MIDI

Display Messages

Troubleshooting

Effect Connection in Each Mode

1 Element EQ applied to each Element (for a Normal

Voice) and each Key (for a Drum Voice)

Can be set in the EQ section (pages 57 and 62) of the Voice Element

Edit/Voice Key Edit on the S90 XS/S70 XS Editor.

2 Common EQ applied to all the Elements and Drum

Keys

Can be set in the 3 Band EQ display (page 44) of Voice Edit.

3 Selection which Insertion Effect, A or B is applied to

each Element/Key

Can be set in the Effect display (page 44) of the Voice Edit on the S90

XS/S70 XS Editor.

4 Insertion Effect A/B related parameters

Can be set in the Effect Parameter display (page 45) for “Ins A” and “Ins

B” of Voice Edit.

5 Reverb and Chorus related parameters

Can be set in the Effect Parameter display (page 45) for “Reverb” and

“Chorus” of Voice Edit.

6 Master Effect related parameters

Can be set in the Voice Master FX display (page 142) of the Utility mode.

7 Master EQ related parameters

Can be set in the Voice Master EQ display (page 143) of the Utility mode.

NOTE Regarding the Audio Input signal from the MIC INPUT jack in the

Voice mode, when the “Output Select” parameter (page 141) is set

to something other than “L&R,” the signal can be applied at only 3 –

4 settings as shown above and output.

1 Part EQ applied to each Part

Can be set in the 3 Band EQ display (page 88) of Performance Part Edit.

2 Selection to which Parts the Insertion Effect is

applied

Can be set in the Fx Send display (page 89) of Performance Edit.

3 Reverb and Chorus related parameters

Can be set in the Effect Parameter display (page 77) for “Reverb” and

“Chorus” of Performance Common Edit and the Fx Send display (page

89) of Performance Part Edit.

4 Master Effect related parameters

Can be set in the Effect Parameter display (page 77) for “Master” of

Performance Common Edit Effect Select.

5 Master EQ related parameters

Can be set in the EQ display (page 76) of Performance Common Edit.

NOTE The Effect settings of 1, 3, and 4 in the Voice mode are available

for up to eight parts for which the Insertion Effect is turned on.

NOTE The audio signals of the parts for which the “Output Select”

parameter (page 78)is set to something other than “L&R” can be

applied only at the 1 and 2 settings as shown above and output.

In the Voice mode

In the Performance mode

Element 1 – 8

Drum Key C0 – C6

Voice

Element or Key

Element EQ

Common EQ

Insertion A

Insertion B

Send Level

Chorus

Reverb

Chorus

To R eve r b

Return Level

Master

Effect

Master EQ

Voice

Part EQ

Insertion A/B

Part 1 – 4

Master

Effect

Master EQ

Reverb

Chorus

Send Level

Chorus

To R eve r b

Return Level

Performance

Reference Manual

Basic Structure

16

Basic Structure

Functional Blocks

Tone Generator

A/D Input

Arpeggio

Sequencer

Audio Record/Play

Controller

Effect

Internal Memory

Reference

Voice

Performance

Multi

SEQ Play

Master

Remote

File

Audio Rec/Play

Utility

Appendix

About MIDI

Display Messages

Troubleshooting

1 Part EQ applied to each Part

Can be set in the 3 Band EQ display (page 108) of Multi Part Edit.

2 Selection to which Parts the Insertion Effect is

applied

Can be set in the Fx Send display (page 109) of Multi Part Edit on the

S90 XS/S70 XS instrument and the Effect display of Multi Common Edit in

the S90 XS/S70 XS Editor.

3 Reverb and Chorus related parameters

Can be set in the Effect Parameter display (page 97) for “Reverb” and

“Chorus” of Multi Common Edit and the Fx Send display (page 109) of

Multi Part Edit.

4 Master Effect related parameters

Can be set in the Effect Parameter display (page 96) for “Master” of Multi

Common Edit.

5 Master EQ related parameters

Can be set in the Master EQ display (page 97) of Multi Common Edit.

NOTE The Effect settings of 1, 3, and 4 in the Voice mode illustrated on

page 15 are available for up to eight parts for which the Insertion

Effect is turned on.

NOTE The audio signals of the parts for which the “Output Select”

parameter (page 98) is set to something other than “L&R” can be

applied only at the 1 and 2 settings as shown above and output.

Effect Types Divided into Effect Categories

This instrument provides such a wide and extensive variety of Effect types that it may be difficult to find the desired

Effect type out of the great number that are available. This is why all the Effect types are divided into convenient Effect

categories. This section explains the Effect categories and their types.

The Effect Type list described below for each category contains the columns: Rev (Reverb), Cho (Chorus), Ins

(Insertion) and Mas (Master Effect). The checkmarks indicated in these columns means the Effect Type is available for

each block. These Effect types (with the checkmarks indicated in each list) can be selected from the panel controls.

Reverb

Also called “reverberation,” this refers to the sound energy remaining in a room or closed space after

the original sound stops. Similar to yet different from echo, reverb is the indirect, diffuse sound of

reflections from the walls and ceiling that accompany the direct sound. The characteristics of this

indirect sound depends on the size of the room or space and the materials and furnishings in the room.

In the Multi mode

Effect Type Rev Cho Ins Description

REV-X HALL

 — — Reverb emulating the acoustics of a concert hall using the REV-X technology.

R3 HALL

 ——

Reverb emulating the acoustics of a concert hall using the algorithm derived

from the Yamaha ProR3.

SPX HALL



Reverb emulating the acoustics of a concert hall derived from the Yamaha

SPX1000.

REV-X ROOM

 — — Reverb emulating the acoustics of a room using the REV-X technology.

R3 ROOM

 ——

Reverb emulating the acoustics of a room using the algorithm derived from

the Yamaha ProR3.

SPX ROOM

Reverb emulating the acoustics of a room derived from the Yamaha SPX1000.

R3 PLATE

 ——

Reverb emulating a metal plate using the algorithm derived from the Yamaha

ProR3.

SPX STAGE

Reverb appropriate for a solo instrument derived from the Yamaha SPX1000.

SPACE SIMULATOR

 ——

Reverb which lets you set the space size by specifying the width, height, and

depth.

Voice

Part EQ

Insertion A/B

Part 1 – 8

Master

Effect

Master EQ

Reverb

Chorus

Send Level

Chorus

To R ever b

Return Level

Multi

Reference Manual

Basic Structure

17

Basic Structure

Functional Blocks

Tone Generator

A/D Input

Arpeggio

Sequencer

Audio Record/Play

Controller

Effect

Internal Memory

Reference

Voice

Performance

Multi

SEQ Play

Master

Remote

File

Audio Rec/Play

Utility

Appendix

About MIDI

Display Messages

Troubleshooting

Delay

An effect (or device) that delays an audio signal for ambient or rhythmic effects.

Chorus

Depending on the particular chorus type and parameters, this can make a voice sound “larger,” as if

several identical instruments were playing in unison, or it can give a voice greater warmth and depth.

Flanger

The flanger creates a swirling, metallic sound.

Phaser

Cyclically modulates the phase to add modulation to the sound.

Tremolo & Rotary

The Rotary Speaker effect simulates the characteristic vibrato effect of a rotary speaker.

Distortion

This type can be used mainly for guitar, adding distortion with an edge to the sound.

Effect Type Cho Ins Mas Description

CROSS DELAY

— The feedback of the two delayed sounds is crossed.

TEMPO CROSS

DELAY

— Cross delay synchronized with the tempo of Song/Pattern/Arpeggio.

TEMPO DELAY

MONO

— Mono delay synchronized with the tempo of Song/Pattern/Arpeggio.

TEMPO DELAY

STEREO

— Stereo delay synchronized with the tempo of Song/Pattern/Arpeggio.

CONTROL DELAY

—  —

Delay with delay time controllable in real time

DELAY LR

— Produces two delayed sounds: L and R.

DELAY LCR

— Produces three delayed sounds: L, R and C (center).

DELAY LR (Stereo)

Produces two delayed sounds in stereo: L and R.

Effect Type Cho Ins Description

G CHORUS



A Chorus Effect that produces a richer and more complex modulation than normal

chorus.

2 MODULATOR

A Chorus Effect consisting of the pitch modulation and the amplitude modulation.

SPX CHORUS

An effect which uses a 3-phase LFO to add modulation and spaciousness to the sound.

SYMPHONIC

A multi-stage version of SPX CHORUS modulation.

ENSEMBLE DETUNE

Chorus effect without modulation, created by adding a slightly pitch-shifted sound.

Effect Type Cho Ins Description

VCM FLANGER

Flanger with VCM technology producing a vintage sound.

CLASSIC FLANGER

Conventional type of flanger.

TEMPO FLANGER

Tempo-synchronized flanger.

DYNAMIC FLANGER

—  Dynamically controlled flanger.

Effect Type Cho Ins Description

VCM PHASER MONO

Mono phaser with VCM technology producing a vintage sound.

VCM PHASER STEREO

Stereo phaser with VCM technology producing a vintage sound.

TEMPO PHASER

Tempo-synchronized phaser.

DYNAMIC PHASER

—  Dynamically controlled phase shifter.

Effect Type Ins Description

AUTO PAN

 An effect which cyclically moves the sound left/right and front/back.

TREMOLO

 An effect which cyclically modulates the volume.

ROTARY SPEAKER

 Simulation of a rotary speaker.

Effect Type Ins Mas Description

AMP SIMULATOR 1

 — A simulation of a guitar amp.

AMP SIMULATOR 2

 — A simulation of a guitar amp.

COMP DISTORTION

 —

Since a Compressor is included in the first stage, steady distortion can be

produced regardless of changes in input level.

COMP DISTORTION DELAY

Compressor, Distortion and Delay are connected in series.

Reference Manual

Basic Structure

18

Basic Structure

Functional Blocks

Tone Generator

A/D Input

Arpeggio

Sequencer

Audio Record/Play

Controller

Effect

Internal Memory

Reference

Voice

Performance

Multi

SEQ Play

Master

Remote

File

Audio Rec/Play

Utility

Appendix

About MIDI

Display Messages

Troubleshooting

Compressor

Compressor is an effect commonly used to limit and compress the dynamics (softness/loudness) of an

audio signal. When used with gain to boost the overall level, this creates a more powerful, more

consistently high-level sound. Compression can be used to increase sustain for electric guitar, smooth

out the volume of a vocal, or bring a drum kit or rhythm pattern further up-front in the mix.

Wah

This effect cyclically modulates the tone brightness (cutoff frequency of a filter). Auto Wah modulates

the tone via LFO, Touch Wah modulates the tone via volume (note on velocity) and Pedal Wah

modulates the tone the pedal control.

Lo-Fi

This effect intentionally degrades the audio quality of the input signal via several methods, including

lowering of the sampling frequency.

Tech

This effect radically changes the tonal characteristics by using a filter and modulation.

Vocoder

The Vocoder effect does not belong to any category.

Misc

This category includes effect types not included in the other categories.

Effect Type Ins Mas Description

VCM COMPRESSOR 376

Compressor with VCM technology.

CLASSIC COMPRESSOR

 — Conventional type of compressor.

MULTI BAND COMP

3-band type compressor.

Effect Type Ins Description

VCM AUTO WAH

 Modulates the tone via the LFO.

VCM TOUCH WAH

 Modulates the tone via the volume (note on velocity).

VCM PEDAL WAH



Modulates the tone via the pedal control. For best results, assign the Pedal Control

parameter of this Effect type to the Foot Controller in the Controller Set display, then use

the Foot Controller to control this effect in real time.

Effect Type Ins Mas Description

LO-FI

Degrades the audio quality of the input signal to get a lo-fi sound.

NOISY

 — Adds the noise to the current sound.

DIGITAL TURNTABLE

 — Simulates the noise of an analog record.

Effect Type Ins Mas Description

RING MODULATOR



An effect that modifies the pitch by applying amplitude modulation to the

frequency of the input.

DYNAMIC RING MODULATOR

 — Dynamically controlled Ring Modulator

DYNAMIC FILTER

Dynamically controlled filter

AUTO SYNTH

 — Processes the input signal into a synthesizer-type sound.

ISOLATOR

Controls the level of a specified frequency band of the input signal.

SLICE

Slices the AEG of the Voice sound.

TECH MODULATION

 —

Adds a unique feeling of modulation similar to ring modulation.

Effect Type Ins Description

VOCODER



This effect extracts characteristics from the microphone sound and applies it to the

Voice played from the keyboard. This creates a distinctive, “robot voice” effect which is

generated when you play the keyboard and sing or speak into the microphone at the

same time.

Effect Type Cho Ins Description

VCM EQ 501

—  Vintage 5-band parametric EQ with VCM technology.

HARMONIC ENHANCER

—  Adds new harmonics to the input signal to make the sound stand out.

TALKING MODULATOR

—  Adds a vowel sound to the input signal.

DAMPER RESONANCE

— 

Simulates the resonance produced when the damper pedal of the piano is

pressed.

PITCH CHANGE

—  Changes the pitch of the input signal.

EARLY REFLECTION

This effect isolates only the early reflection components of the reverb.

NOISE GATE+COMP+EQ

— 

This effect combines Noise Gate, Compressor and 3-Band EQ, to provide

optimum processing of the microphone input, especially vocals.

Reference Manual

Basic Structure

19

Basic Structure

Functional Blocks

Tone Generator

A/D Input

Arpeggio

Sequencer

Audio Record/Play

Controller

Effect

Internal Memory

Reference

Voice

Performance

Multi

SEQ Play

Master

Remote

File

Audio Rec/Play

Utility

Appendix

About MIDI

Display Messages

Troubleshooting

VCM is a technology that enables you to model element levels in analog circuits (such as resistors and

capacitors). Effect types using the VCM technology produce the uniquely warm characteristics of

vintage processing gear.

This instrument features the following eight VCM Effect types.

VCM Compressor 376

This effect emulates the characteristics of analog compressors, which are used as a standard effect in

recording studios. It frames and thickens the sound, and is suitable for drum and bass sounds.

VCM Equalizer 501

This effect emulates the characteristics of analog equalizers used in 1970s. It adds drive to the sound

by reproducing distortion typical to analog circuits. This effect consists of two shelving filters and three

peaking filters.

VCM Flanger

This effect emulates the characteristics of analog flanger used in the 1970s, recreating a warm, high-

quality flanger effect.

VCM Phaser Mono, VCM Phaser Stereo

These effects emulate the characteristics of analog phasers used in the 1970s, recreating a warm, high-

quality phaser effect.

VCM Auto Wah, VCM Touch Wah, VCM Pedal Wah

These effects emulate the characteristics of analog Wah used in the 1970s, recreating a warm, high-

quality wah-wah effect.

REV-X is a reverb algorithm developed by Yamaha. It provides high-density, richly reverberant sound

quality, with smooth attenuation, spread and depth that work together to enhance the original sound.

This instrument features two types of REV-X effects: REV-X Hall and REV-X Room.

Effect Parameters

Each of the Effect Types has parameters that determine how the Effect is applied to the sound. A variety of sounds can

be obtained from a single effect type by setting these parameters.

For information about the Effect parameters, see below.

Preset settings for parameters of each effect type are provided as templates and can be selected in the

Effect Type selection display. To get a desired effect sound, try first selecting one of the Presets close to

your imagined sound, then change the parameters as necessary.

To get a desired effect sound, try first selecting one of the Presets close to your imagined sound, then

change the parameters as necessary. For details about the preset settings of each effect type, refer to

the Data List (separate PDF documentation).

VCM (Virtual Circuitry Modeling)

REV-X

Preset settings for Effect parameters

Reference Manual

Basic Structure

20

Basic Structure

Functional Blocks

Tone Generator

A/D Input

Arpeggio

Sequencer

Audio Record/Play

Controller

Effect

Internal Memory

Reference

Voice

Performance

Multi

SEQ Play

Master

Remote

File

Audio Rec/Play

Utility

Appendix

About MIDI

Display Messages

Troubleshooting

Effect parameters making up the affect of the Effect Type are listed here in alphabetical order.

NOTE

Each name of the parameters listed below is indicated with its full or complete spelling, although it is

indicated with the abbreviated spelling on the LCD. The discrepancy in the name may make it difficult to find

the desired parameter. In such a case, confirm the parameters belonging to the Effect Type you want to edit

by referring to the Effect Parameter List in the Data List (separate PDF documentation).

NOTE Some parameters below may appear in different effect types with the same name, but actually have different

functions depending on the particular effect type. For these parameters, two or three types of explanations

are given. The Effect type corresponding to each explanation is described at the top of the sentences.

Effect parameters

Parameter name Descriptions

AEG Phase

Offsets the phase of the AEG.

AM Depth

Determines the depth of the amplitude modulation.

AM Inverse R

Determines the phase of the amplitude modulation for the R channel.

AM Speed

Determines the amplitude modulation speed.

AM Wave

Selects the wave for modulating the amplitude.

AMP Type

Selects the amplifier type to be simulated.

Analog Feel

Adds the characteristics of an analog flanger to the sound.

Attack

Determines the amount of time that elapses between the playing of a key and the start of the

compressor effect.

Attack Offset

Determines the amount of time that elapses between the playing of a key and the start of the wah effect.

Attack Time

Determines the attack time of the envelope follower.

Bit Assign

Determines how the Word Length is applied to the sound.

Bottom

*1

Determines the minimum value of the wah filter.

Click Density

Determines the frequency at which the click sounds.

Click Level

Determines the click level.

Color

*2

Determines the fixed phase modulation.

Common Release

This is a parameter of “Multi Band Comp.” This parameter determines the amount of time that elapses

between the releasing of a note and the end of the effect.

Compress

Determines the minimum input level at which the compressor effect is applied.

Control Type

This is a parameter of “Control Delay.” When set to “Normal,” the delay effect is always applied to the

sound. When set to “Scratch,” the delay effect is not applied if both the Delay Time and Delay Time

Offset are set to “0.”

Damper Control

When the half-damper compatible FC3 footswitch is connected to the SUSTAIN jack, the Damper

Control parameter is controlled by the FC3 over a range of 0 – 127, allowing for partial damper effects,

such as is available on an actual grand piano.

Decay

Controls how the reverb sound decays.

Delay Level C

Determines the level of the delayed sound for the center channel.

Delay Mix

Determines the level of the delayed mixed sound when multiple effects are applied.

Delay Offset

Determines the offset value of the delay modulation.

Delay Time

Determines the delay of the sound in note value or absolute time.

Delay Time C, L, R

Determines the delay time for each channel: center, left and right.

Delay Time L>R

Determines the amount of time between the moment the sound is input from the L channel and the

moment the sound is output to the R channel.

Delay Time Ofst R

Determines the delay time for the R channel as offset.

Delay Time R>L

Determines the amount of time between the moment the sound is input from the R channel and the

moment the sound is output to the L channel.

Delay Transition Rate

Determines the speed (rate) at which the delay time is changed from the current value to the specified

new value.

Density

Determines the density of the reverberations or reflections.

Depth

When “Space Simulator” is selected, this parameter determines the depth of the simulated room.

When “VCM Flanger” is selected, this parameter determines the amplitude of the LFO wave which

controls the cyclic change of the delay modulation.

When “Phaser Type” is selected, this parameter determines the amplitude of the LFO wave which

controls the cyclic change of the phase modulation.

Detune

Determines the amount of pitch to be detuned.

Device

Selects the device for changing how to distort the sound.

Diffusion

Determines the spread of the selected effect.

Direction

Determines the direction of the modulation controlled by the envelope follower.

Divide Freq High

Determines the high frequency for dividing the entire sound into three bands.

Divide Freq Low

Determines the low frequency for dividing the entire sound into three bands.

Divide Min Level

Determines the minimum level of the portions extracted via the slice effect.

Divide Type

Determines how the sound (wave) is sliced by the note length.

Drive

When one of the distortion, noisy and slice effects is selected, this parameter determines the extent to

which the sound is distorted.

When one of the misc effects is selected, this parameter determines the extent to which the enhancer is

applied.

Drive Horn

Determines the depth of the modulation generated via the rotation of the horn.

Sidan laddas...

Yamaha S90 Användarmanual

Denna manual är också lämplig för

Yamaha S90 Användarmanual

på andra språk

Relaterade papper