Yamaha R-N402 Silver Användarmanual

RU

NL

ES

IT

SV

G

OWNER’S MANUAL

MODE D’EMPLOI

BEDIENUNGSANLEITUNG

BRUKSANVISNING

MANUALE DI ISTRUZIONI

MANUAL DE INSTRUCCIONES

GEBRUIKSAANWIJZING

ИНСТРУКЦИЯ ПО ЭКСПЛУАТАЦИИ

DE

FR

EN

Network Receiver

Réseau Ampli-Tuner

R-N402/R-N402D

Sidan laddas ...

2 En

INTRODUCTION

This unit is a network receiver compatible with a network source such as a media server and mobile device.

It supports playback from not only analog sources such as a CD player but also Bluetooth devices and network streaming

services.

*

You need a commercially available wireless router (access point) when you use a mobile device.

1 Play back the Internet radio (p. 38)

2 Play back the streaming service

(see the supplement for each service.)

3 Play back music files stored on your PC (p. 36)

4 Play back music files stored on your NAS

(p. 36)

5 Play back music files with AirPlay (p. 40)

6 Play back audio content from Bluetooth

devices (p. 34)

7 Play back music files stored on your USB

device (p. 41)

8 Play back your external component (p. 10)

9 Listening to radio (p. 22, 26, 30)

y

For details on connecting the external devices, see “Connections” (p. 10).

What you can do with this unit

Sources that can be played back on this unit

5V

A

SPEAKERS

USB

PHONES

VOLUME

SELECT

Wi

BLUETOOTH

Fi

RETURN

PUSH ENTER

CONNECT

DISPLAY MODE

MEMORY BAND

PRESET

TUNING

BASS

TREBLE

INPUT

This unit

1 Internet

2 Streaming service

Modem

Router*

3 PC

5 AirPlay (iTunes)

4 NAS

5 AirPlay (iPhone/iPad/iPod touch)

6 Bluetooth

7 USB device

8 CD player etc.

Mobile

device

9 Radio

Sidan laddas ...

Controls and functions

7 En

English

INTRODUCTION

[AM radio is available only for R-N402.]

1 NETWORK jack

For connecting to a network with a network cable

(p. 13).

2 ANTENNA terminals

For connecting to the radio antennas (p. 12).

3 Wireless antenna

For connecting to a network device wirelessly (p. 13).

4 Power cable

For connecting to an AC wall outlet (p. 13).

5 OPTICAL jack

For connecting to audio components equipped with

optical digital output (p. 10).

6 COAXIAL jack

For connecting to audio components equipped with a

coaxial digital output (p. 10).

7 CD jacks

For connecting to a CD player (p. 10).

8 LINE 1-3 jacks

For connecting to analog audio components (p. 10).

9 SPEAKERS terminals

Used to connect speakers (p. 11).

0 VOLTAGE SELECTOR

(Only for General and Brazil models)

Rear panel

MAINS

VOLTAGE SELECTOR

SPEAKERS

WIRELESS

ANTENNA

CD LINE

IN

OUT

A

B

22020

240 V

0

NETWORK

DIGITAL

OPTICAL

COAXIAL

AM

FM

75

23

65 78 9

0

12 3

4

(R-N402)

Controls and functions

8 En

1 Infrared signal transmitter

Sends infrared signals.

2 A (power)

Turns on/off (standby) the unit.

3 SLEEP

Sets the sleep timer (p. 21).

4 DIMMER

Changes the brightness level of the front display.

Choose brightness from 5 levels by pressing this key

repeatedly.

5 SPEAKERS A/B

Turns on and off the set of speakers connected to the

SPEAKERS A and/or SPEAKERS B terminals on the

rear panel of this unit when the corresponding key is

pressed.

6 Input selection keys

Select the input source you want to listen to.

y

NET key is for network source. Press repeatedly to select a

desired network source.

7 MODE

Sets the FM band reception mode to automatic stereo

or monaural (p. 22, 26).

8 MEMORY

Registers the current radio station as a preset when

TUNER is selected as the input source (p. 23, 27, 31).

Registers the current playback song or streaming

station as a preset when NET, USB are selected as the

input source (p. 43).

9 PRESET j / i

Recalls a preset radio station (p. 24, 28, 31) or song/

streaming station (p. 43).

0 Menu operation keys

Cursor keys Select a menu or a parameter.

ENTER Confirms a selected item.

RETURN Returns to the previous state.

A HOME

Moves up top level when selecting music files,

folders, etc.

B SETUP

Displays the “SETUP” menu (p. 45).

C NOW PLAYING

Displays music information when selecting music

files, folders, etc.

D Playback keys

Let you play back and perform other operations for

network sources, Bluetooth devices and USB devices.

Yamaha does not guarantee the operation of all Bluetooth and

USB devices.

Remote control

LINE 1

CD

NET USB

BLUETOOTH

TUNER

TUNING

PRESET

MUTE

NOW PLAYING

RETURN

OPTION

VOLUME

MEMORY

MODE

BAND

DISPLAY

LINE 2 LINE 3

ENTER

DIMMER

SLEEP

SPEAKERS

COAXIAL

OPTICAL

BA

HOME

SETUP

REPEAT

SHUFFLE

1

2

3

4

A

B

G

H

C

I

5

7

8

9

D

0

E

F

6

Note

Sidan laddas ...

12 En

Connections

Connect the supplied FM/AM antenna to this unit.

Fix the end of the FM antenna to a wall, and place the AM

antenna.

• If you experience poor reception quality, install an outdoor

antenna.

• Unwind only the length of cable needed from the AM antenna

unit.

• The wires of the AM antenna have no polarity.

■ Assembling the supplied AM antenna

■ Connecting the wires of the AM antenna

Connect the supplied DAB/FM antenna to this unit and fix

the antenna ends to a wall.

• If you experience poor reception quality, install an outdoor

antenna.

• The antenna should be stretched out horizontally.

Connecting the FM/AM antennas

(R-N402)

Notes

ANTENNA

CD LINE

IN

OUT

NETWORK

DIGITAL

OPTICAL

COAXIAL

AM

FM

75

FM antenna AM antenna

Insert

2

Hold down

1

Connecting the DAB/FM antenna

(R-N402D)

Notes

CD LINE

IN

OUT

NETWORK

DIGITAL

OPTICAL

COAXIAL

ANTENNA

FMDAB

75

DAB/FM antenna

Sidan laddas ...

19 En

Connecting to a network

English

PREPARATION

Perform the following procedure to verify the unit’s

connection to a network.

1 Press SETUP.

2 Use the cursor keys ( / ) to select

“Network” and press ENTER.

y

To return to the previous state, press RETURN.

3 Use the cursor keys ( / ) to select

“Information” and press ENTER.

4 Use the cursor keys ( / ) to select

“STATUS”.

When “Connect” appears, the unit is connected to a

network. If “Disconnect” appears, reset connection.

5 To exit from the menu, press SETUP.

Verify the network connection

status

PRESET

MUTE

NOW PLAYING

RETURN

OPTION

VOLUME

MEMORY

ENTER

HOME

SETUP

RETURN

SETUP

ENTER

Cursor keys

 / 

¡Connec

STATUS

20 En

BASIC OPERATION

1 Press one of the input selection keys to

select the input source you want to listen to.

2 Press SPEAKERS A and/or SPEAKERS B to

select speakers A and/or speakers B.

• When one set of speakers is connected using bi-wire

connections, or when using two sets of speakers simultaneously

(A and B), make sure “SP A” and “SP B” are displayed on the

front display.

• When listening with headphones, turn off the speakers.

3 Play the source.

4 Press VOLUME +/– to adjust the sound

output level.

y

• You can adjust the tonal quality by using the BASS +/– and

TREBLE +/– on the front panel (p. 5).

• You can also adjust the speaker balance by using the “Balance”

option in the “SETUP” menu (p. 48).

When you select a network source or USB as the input

source, you can switch playback information on the front

display.

1 Press DISPLAY.

Each time you press the key, the displayed item

changes.

About 3 seconds later, the corresponding information

for the displayed item appears.

Playback

Playing a source

Notes

LINE 1

CD

NET USB

BLUETOOTH

TUNER

TUNING

PRESET

MUTE

NOW PLAYING

RETURN

OPTION

VOLUME

MEMORY

MODE

BAND

DISPLAY

LINE 2 LINE 3

DIMMER

SLEEP

SPEAKERS

COAXIAL

OPTICAL

BA

HOME

SETUP

SPEAKERS A/B

VOLUME

Input selection

keys

Switching information on the front

display

Input source Item

Bluetooth

Track (song title), Artist (artist name),

Album (album name)

Server

AirPlay

USB

Track (song title), Artist (artist name),

Album (album name), Time (elapsed time)

Net Radio

Track (song title), Album (album name),

Time (elapsed time), Station (station name)

LINE 1

CD

NET USB

BLUETOOTH

TUNER

TUNING

PRESET

MEMORY

MODE

BAND

DISPLAY

LINE 2 LINE 3

DIMMER

SLEEP

SPEAKERS

COAXIAL

OPTICAL

BA

DISPLAY

SP A

Track

INFO

SP A

› Track #1

SERVER

21 En

Playback

English

BASIC

OPERATION

Use this feature to automatically set this unit to standby

mode after a certain amount of time. The sleep timer is

useful when you are going to sleep while this unit is

playing.

The sleep timer can only be set with the remote control.

1 Press SLEEP repeatedly to set the amount of

time before this unit is set to standby mode.

Each time you press SLEEP, the front display

changes as shown below.

The SLEEP indicator blinks while setting the amount

of time for the sleep timer.

If the sleep timer is set, the SLEEP indicator on the

front display lights up.

y

• To disable the sleep timer, select “Sleep Off”.

• The sleep timer setting can also be canceled by pressing

A (power) to set this unit to standby mode.

Using the sleep timer

Note

LINE 1

CD

NET USB

BLUETOOTH

TUNER

TUNING

PRESET

MEMORY

MODE

BAND

DISPLAY

LINE 2 LINE 3

DIMMER

SLEEP

SPEAKERS

COAXIAL

OPTICAL

BA

SLEEP

A

(power)

SLEEP

Sleep 120 in.

Sidan laddas ...

23 En

Listening to FM/AM radio (R-N402)

English

BASIC

OPERATION

1 Press TUNER to select “TUNER” as the input

source.

2 Press OPTION on the remote control.

The “OPTION” menu is displayed (p. 44).

3 Use the cursor keys ( / ) to select “Auto

Preset”, and then press ENTER.

This unit starts scanning the FM band about 5

seconds later from the lowest frequency upwards.

To begin scanning immediately, press ENTER.

y

• Before scanning begins, you can specify the first preset number

to be used by pressing PRESET j / i or cursor keys (/) on

the remote control.

• To cancel scanning, press RETURN.

When scanning is complete, “FINISH” is displayed and

then the display returns to original state.

■ Registering a radio station manually

1 Tune in to the desired radio station.

See “FM/AM tuning” (p. 22).

2

Press MEMORY.

y

By holding down MEMORY for more than 3 seconds, you

can skip the following steps and automatically register the

selected station to an empty preset number (i.e., the preset

number following the last preset number used).

3 Press PRESET j / i to select the preset

number to which the station will be

registered.

When you select a preset number to which no station

is registered, the message “Empty” is displayed.

4 Press MEMORY.

When registration is complete, the display returns to

the original state.

y

To cancel registration, press RETURN or do not perform any

operations for about 30 seconds.

LINE 1

CD

NET USB

BLUETOOTH

TUNER

TUNING

PRESET

MUTE

NOW PLAYING

RETURN

OPTION

VOLUME

MEMORY

MODE

BAND

DISPLAY

LINE 2 LINE 3

ENTER

DIMMER

SLEEP

SPEAKERS

COAXIAL

OPTICAL

BA

HOME

SETUP

ENTER

BAND

TUNER

OPTION

RETURN

PRESET j / i

ENTER

Cursor keys  / 

SP A

Au o Prese

OPTION

SP A

01:FM 87.50MHz

READY

Preset number Frequency

LINE 1

CD

NET USB

BLUETOOTH

TUNER

TUNING

PRESET

MEMORY

MODE

BAND

DISPLAY

LINE 2 LINE 3

ENTER

DIMMER

SLEEP

SPEAKERS

COAXIAL

OPTICAL

BA

MEMORY

PRESET j / i

03: E p y

99.15

“Empty” (not in use) or the frequency

currently registered.

24 En

Listening to FM/AM radio (R-N402)

■ Recalling a preset station

You can recall preset stations that you registered using

either an automatic station preset or manual station preset.

1 Press TUNER to select “TUNER” as the input

source.

2 Press PRESET j / i to select a preset

number.

y

• Preset numbers to which no stations are registered are skipped.

• “No Presets” is displayed if no stations are registered.

■ Clearing a preset station

You can clear radio stations that are registered to the

preset numbers.

1 Press TUNER to select “TUNER” as the input

source.

2 Press OPTION.

3 Use the cursor keys ( / ) to select “Clear

Preset” and press ENTER.

4 Use the cursor keys ( / ) to select a preset

station to be cleared and press ENTER.

If the preset station is cleared, “Cleared” appears and

then the next in-use preset number is displayed.

5 Repeat Step 4 until all desired preset stations

are cleared.

6 To exit from the “OPTION” menu, press

OPTION.

LINE 1

CD

NET USB

BLUETOOTH

TUNER

TUNING

PRESET

MEMORY

MODE

BAND

DISPLAY

LINE 2 LINE 3

ENTER

DIMMER

SLEEP

SPEAKERS

COAXIAL

OPTICAL

BA

TUNER

PRESET j / i

LINE 1

CD

NET USB

BLUETOOTH

TUNER

TUNING

PRESET

MUTE

NOW PLAYING

RETURN

OPTION

VOLUME

MEMORY

MODE

BAND

DISPLAY

LINE 2 LINE 3

ENTER

COAXIAL

OPTICAL

HOME

SETUP

ENTER

TUNER

OPTION

ENTER

Cursor keys  / 

01:FM 88.10MHz

CLEAR

Preset station to be cleared

01:Cleared

CLEAR

Sidan laddas ...

26 En

1 Press TUNER to select “TUNER” as the input

source.

2 Press BAND repeatedly to select the FM

band.

3 Press and hold TUNING jj / ii for more than

1 second to begin tuning.

Press ii to tune in to a higher frequency.

Press jj to tune in to a lower frequency.

The frequency of the received station is shown in the

front display.

If a broadcast is being received, the “TUNED”

indicator on the front display will light up. If a stereo

broadcast is being received, the “STEREO” indicator

will also light up.

y

• If the station signals are weak, tuning search does not stop at the

desired station.

• When the signal reception for an FM radio station is unstable,

switching to monaural may improve it.

■ Improving FM reception (FM mode)

If the signal from the station is weak and the sound quality

is not good, set the FM band reception mode to monaural

mode to improve reception.

1 Press MODE repeatedly to select “Stereo”

(automatic stereo mode) or “Mono”

(monaural mode) when this unit is tuned in to

an FM radio station.

When Mono is selected, FM broadcasts will be heard

in monaural sound.

The STEREO indicator on the front panel lights up while

listening to a station in stereo mode (p. 6).

You can register up to 40 radio stations as presets. Once

you have registered stations, you can easily tune in to

them by recalling the presets. You can automatically

register FM stations that have strong signals. If the FM

stations you want to store have weak signals, you can

register them manually (p. 27).

■ Registering radio stations automatically

• If a station is registered to a preset number that already has a

station registered to it, the previously registered station is

overwritten.

• If the station you want to register is weak in signal strength, try

using the manual preset tuning method.

• Only for U.K. and Europe models:

Only Radio Data System broadcasting stations can be preset

automatically.

y

FM stations registered as presets using the automatic preset

registration feature will be heard in stereo.

Listening to FM radio (R-N402D)

FM tuning

LINE 1

CD

NET USB

BLUETOOTH

TUNER

TUNING

PRESET

MEMORY

MODE

BAND

DISPLAY

LINE 2 LINE 3

DIMMER

SLEEP

SPEAKERS

COAXIAL

OPTICAL

BA

BAND

TUNING jj / ii

TUNER

STEREO

TUNED

SP A

FM 87.55MHz

Frequency

Note

Using preset functions

Notes

LINE 1

CD

NET USB

BLUETOOTH

TUNER

TUNING

PRESET

MEMORY

MODE

BAND

DISPLAY

LINE 2 LINE 3

DIMMER

SLEEP

SPEAKERS

COAXIAL

OPTICAL

BA

MODE

27 En

Listening to FM radio (R-N402D)

English

BASIC

OPERATION

1 Press TUNER to select “TUNER” as the input

source.

2 Press OPTION on the remote control.

The “OPTION” menu is displayed (p. 44).

3 Use the cursor keys ( / ) to select “Auto

Preset”, and then press ENTER.

This unit starts scanning the FM band about 5

seconds later from the lowest frequency upwards.

To begin scanning immediately, press ENTER.

y

• Before scanning begins, you can specify the first preset number

to be used by pressing PRESET j / i or cursor keys (/) on

the remote control.

• To cancel scanning, press RETURN.

When scanning is complete, “FINISH” is displayed and

then the display returns to original state.

■ Registering a radio station manually

1 Tune in to the desired radio station.

See “FM tuning” (p. 26).

2

Press MEMORY.

y

By holding down MEMORY for more than 3 seconds, you

can skip the following steps and automatically register the

selected station to an empty preset number (i.e., the preset

number following the last preset number used).

3 Press PRESET j / i to select the preset

number to which the station will be

registered.

When you select a preset number to which no station

is registered, the message “Empty” is displayed.

4 Press MEMORY.

When registration is complete, the display returns to

the original state.

y

To cancel registration, press RETURN or do not perform any

operations for about 30 seconds.

LINE 1

CD

NET USB

BLUETOOTH

TUNER

TUNING

PRESET

MUTE

NOW PLAYING

RETURN

OPTION

VOLUME

MEMORY

MODE

BAND

DISPLAY

LINE 2 LINE 3

ENTER

DIMMER

SLEEP

SPEAKERS

COAXIAL

OPTICAL

BA

HOME

SETUP

ENTER

BAND

TUNER

OPTION

RETURN

PRESET j / i

ENTER

Cursor keys  / 

SP A

Au o Prese

OPTION

SP A

01:FM 87.50MHz

READY

Preset number Frequency

LINE 1

CD

NET USB

BLUETOOTH

TUNER

TUNING

PRESET

MEMORY

MODE

BAND

DISPLAY

LINE 2 LINE 3

ENTER

DIMMER

SLEEP

SPEAKERS

COAXIAL

OPTICAL

BA

MEMORY

PRESET j / i

03: E p y

99.15

“Empty” (not in use) or the frequency

currently registered.

28 En

Listening to FM radio (R-N402D)

■ Recalling a preset station

You can recall preset stations that were registered using

automatic station preset or manual station preset.

1 Press TUNER to select “TUNER” as the input

source.

2 Press PRESET j / i to select a preset

number.

y

• Preset numbers to which no stations are registered are skipped.

• “No Presets” is displayed if no stations are registered.

■ Clearing a preset station

Clear radio stations registered to the preset numbers.

1 Press TUNER to select “TUNER” as the input

source.

2 Press OPTION.

3 Use the cursor keys ( / ) to select “Clear

Preset” and press ENTER.

4 Use the cursor keys ( / ) to select a preset

station to be cleared and press ENTER.

If the preset station is cleared, “Cleared” appears and

then the next in-use preset number is displayed.

5 Repeat Step 4 until all desired preset stations

are cleared.

6 To exit from the “OPTION” menu, press

OPTION.

LINE 1

CD

NET USB

BLUETOOTH

TUNER

TUNING

PRESET

MEMORY

MODE

BAND

DISPLAY

LINE 2 LINE 3

ENTER

DIMMER

SLEEP

SPEAKERS

COAXIAL

OPTICAL

BA

TUNER

PRESET j / i

LINE 1

CD

NET USB

BLUETOOTH

TUNER

TUNING

PRESET

MUTE

NOW PLAYING

RETURN

OPTION

VOLUME

MEMORY

MODE

BAND

DISPLAY

LINE 2 LINE 3

ENTER

COAXIAL

OPTICAL

HOME

SETUP

ENTER

TUNER

OPTION

ENTER

Cursor keys  / 

01:FM 88.10MHz

CLEAR

Preset station to be cleared

01:Cleared

CLEAR

Sidan laddas ...

32 En

Listening to DAB radio (R-N402D)

■ Clearing preset DAB radio stations

Clear DAB radio stations registered to the preset numbers.

1 Press TUNER to select “TUNER” as the input

source.

2 Press BAND to select the DAB band.

3 Press OPTION to enter the “OPTION” menu.

The “OPTION” menu for TUNER is displayed

(p. 44).

4 Use the cursor keys ( / ) to select “Clear

Preset”, and then press ENTER.

5 Select the desired preset station number by

using the cursor keys ( / ) repeatedly.

The selected preset number blinks on the front panel

display.

6 Press ENTER again to confirm.

“Cleared” is displayed on the front panel display.

Then, another preset station is shown on the front

panel display. When there is no more preset station,

“No Presets” is displayed, and then the display

returns to the “OPTION” menu.

To return the display to the original state, press

RETURN.

This unit can receive various types of DAB information

when it is tuned in to a DAB radio station.

1 Press TUNER to select “TUNER” as the input

source.

2 Tune in to the desired DAB radio station.

3 Press DISPLAY.

Each time you press the key, the displayed item

changes.

The selected item followed by a short description

appears, and then the corresponding information for

that item appears.

Some information may not be available depending on the selected

DAB radio station.

Displaying the DAB information

LINE 1

CD

NET USB

BLUETOOTH

TUNER

TUNING

PRESET

MEMORY

MODE

BAND

DISPLAY

LINE 2 LINE 3

DIMMER

SLEEP

SPEAKERS

COAXIAL

OPTICAL

BA

DISPLAY

Choice Description

Service Label Station name

DLS

(Dynamic Label Segment)

Information on the current station

Ensemble Label Ensemble name

Program Type Station genre

Date And Time Current date and time

Audio Mode Audio mode (monaural/stereo) and

bit rate

CH Label/Freq. Channel label and frequency

Signal Quality Signal reception quality

(0 [none] to 100 [best])

Note

Progra Type

INFO

Item name

Spor

DAB

Information

33 En

Listening to DAB radio (R-N402D)

English

BASIC

OPERATION

You can check reception strength of each DAB channel

label (0 [none] to 100 [best]).

1 Press TUNER to select “TUNER” as the input

source.

2 Press BAND to select the DAB band.

3 Press OPTION to enter the “OPTION” menu.

The “OPTION” menu for TUNER is displayed

(p. 44).

4 Use the cursor keys ( / ) to select

“Tune Aid”, and then press ENTER.

5 Use the cursor keys ( / ) to select the

desired DAB channel label.

■ DAB frequency information

This unit supports Band III (174 to 240 MHz) only.

Checking reception strength of

each DAB channel label

LINE 1

CD

NET USB

BLUETOOTH

TUNER

TUNING

PRESET

MUTE

NOW PLAYING

RETURN

OPTION

VOLUME

MEMORY

MODE

BAND

DISPLAY

LINE 2 LINE 3

ENTER

DIMMER

SLEEP

SPEAKERS

COAXIAL

OPTICAL

BA

HOME

SETUP

ENTER

BAND

TUNER

OPTION

ENTER

Cursor keys

 / 

12B Level: 80

TUNE AID

DAB channel label Reception strength

Frequency

Channel

label

Frequency

Channel

label

174.928 MHz 5A 208.064 MHz 9D

176.640 MHz 5B 209.936 MHz 10A

178.352 MHz 5C 211.648 MHz 10B

180.064 MHz 5D 213.360 MHz 10C

181.936 MHz 6A 215.072 MHz 10D

183.648 MHz 6B 216.928 MHz 11A

185.360 MHz 6C 218.640 MHz 11B

187.072 MHz 6D 220.352 MHz 11C

188.928 MHz 7A 222.064 MHz 11D

190.640 MHz 7B 223.936 MHz 12A

192.352 MHz 7C 225.648 MHz 12B

194.064 MHz 7D 227.360 MHz 12C

195.936 MHz 8A 229.072 MHz 12D

197.648 MHz 8B 230.784 MHz 13A

199.360 MHz 8C 232.496 MHz 13B

201.072 MHz 8D 234.208 MHz 13C

202.928 MHz 9A 235.776 MHz 13D

204.640 MHz 9B 237.488 MHz 13E

206.352 MHz 9C 239.200 MHz 13F

Sidan laddas ...

37 En

Playing back music stored on media servers (PCs/NAS)

English

BASIC

OPERATION

Follow the procedure below to operate the PC music

contents and start playback.

“_” (underscore) will be displayed for characters not supported

by the unit.

1 Press NET repeatedly to select “Server” as

the input source.

2 Use the cursor keys ( / ) to select a music

server and press ENTER.

3 Use the cursor keys to select an item and

press ENTER.

If a song is selected, playback starts and the playback

information is displayed.

y

• If playback of a music file selected from the unit is ongoing on

your PC, the playback information is displayed.

• You can register the current playback song as a preset (p. 43).

• If you press the DISPLAY repeatedly, you can switch the

playback information on the front display (p. 20).

Use the following remote control keys to control

playback.

y

You can also use a DLNA-compatible Digital Media Controller

(DMC) to control playback. For details, see “DMC Control”

(p. 46) in the “SETUP” menu.

■ Repeat/shuffle settings

You can configure the repeat/shuffle settings for the

playback of PC music content.

1 When the input source is “Server,” press

REPEAT or SHUFFLE on the playback key

repeatedly to select the playback method.

Playback of PC music contents

Note

LINE 1

CD

NET USB

BLUETOOTH

TUNER

TUNING

PRESET

MUTE

NOW PLAYING

RETURN

OPTION

VOLUME

MEMORY

MODE

BAND

DISPLAY

LINE 2 LINE 3

ENTER

COAXIAL

OPTICAL

HOME

SETUP

REPEAT

SHUFFLE

ENTER

RETURN

DISPLAY

HOME

NET

NOW PLAYING

ENTER

Cursor keys

Playback keys

SP A

NAS A

SERVER

SP A

Song01

SERVER

Keys Function

Cursor keys

Select a music file or folder.

ENTER

Starts playback if pressed while

content is selected. Moves down

one level if pressed while a folder

is selected.

RETURN

Moves up one level.

Playback

keys

p/ e

Stops/resumes playback.

s

Stops playback.

b / w

Skips forward/backward.

f / a

HOME

Displays the root directory of the

music server.

NOW PLAYING

Displays information about the

song that is playing.

Playback

keys

Setting Function

REPEAT

Off Turns off the repeat function.

One

Plays back the current song

repeatedly.

All

Plays back all songs in the current

album (folder) repeatedly.

SHUFFLE

Off Turns off the shuffle function.

On

Plays back songs in the current album

(folder) in random order.

38 En

You can listen to Internet radio stations from all over the world.

• To use this function, the unit must be connected to the Internet

(p. 13). You can check whether the network parameters (such as

the IP address) are properly assigned to the unit in

“Information” (p. 46) in the “SETUP” menu.

• You may not be able to receive some Internet radio stations.

• The unit uses the vTuner Internet radio station database service.

• This service may be discontinued without notice.

1 Press NET repeatedly to select “NetRadio”

as the input source.

The station list appears on the front display.

2 Use the cursor keys to select an item and

press ENTER.

If an Internet radio station is selected, playback starts

and the playback information is displayed.

Use the following remote control keys to control

playback.

y

• You can register the current playback station as a preset (p. 43).

• If you press the DISPLAY repeatedly, you can switch the

playback information on the front display (p. 20).

• Some information may not be available depending on the

station.

Listening to Internet radio

Notes

LINE 1

CD

NET USB

BLUETOOTH

TUNER

TUNING

PRESET

MUTE

NOW PLAYING

RETURN

OPTION

VOLUME

MEMORY

MODE

BAND

DISPLAY

LINE 2 LINE 3

ENTER

COAXIAL

OPTICAL

HOME

SETUP

REPEAT

SHUFFLE

ENTER

RETURN

DISPLAY

HOME

NET

NOW PLAYING

ENTER

Cursor keys

Playback keys

SP A

Book arks

Ne Radio

Keys Function

Cursor keys

Select the Internet radio station or

category such as the genre.

ENTER

Starts playback if pressed while

an Internet radio station is

selected. Moves down one level if

pressed while a category is

selected.

RETURN

Moves up one level.

Playback keys s

Stops playback.

HOME

Displays the top categories if

pressed during playback.

NOW PLAYING

Displays the playback

information for the Internet radio

station.

SP A

JazzST

Ne Radio

Sidan laddas ...

41 En

English

BASIC

OPERATION

You can play back music files stored on a USB storage device on the unit. Refer to the instruction manuals for the USB

storage device for more information.

• Do not connect devices other than USB mass storage class devices (such as USB chargers or USB hubs), PCs, card readers, an

external HDD, etc.

• Some features may not be compatible, depending on the model or manufacturer of the USB storage device.

• Refer to page 57 for information regarding supported file formats.

1 Connect the USB storage device to the USB

jack.

y

If the USB storage device contains many files, it may take time to

load the them. In this case, “Loading...” appears in the front

display.

• Disconnect the USB storage device from the USB jack when it

is not in use.

• Stop playback of the USB storage device before you disconnect

it from the USB jack.

• You cannot connect the PC to the USB jack of the unit.

Follow the procedure below to operate the USB storage

device contents and start playback.

“_” (underscore) will be displayed for characters not supported

by the unit.

1 Press USB to select “USB” as the input

source.

Playing back music stored on a USB storage device

Notes

Connecting a USB storage device

Notes

5V

A

SPEAKERS

USB

PHONES

DISPLAY MODE

MEMORY

BASS

This unit (front)

USB storage device

SP A

Connec ed

USB

Playback of USB storage device

contents

Note

LINE 1

CD

NET USB

BLUETOOTH

TUNER

TUNING

PRESET

MUTE

NOW PLAYING

RETURN

OPTION

VOLUME

MEMORY

MODE

BAND

DISPLAY

LINE 2 LINE 3

ENTER

COAXIAL

OPTICAL

HOME

SETUP

REPEAT

SHUFFLE

USB

RETURN

HOME

NOW PLAYING

ENTER

Cursor keys

Playback keys

SP A

Bluse

USB

Sidan laddas ...

43 En

English

BASIC

OPERATION

When you select a network or USB source as the input source, you can register the current playback song or streaming

station as a preset. You can program up to 40 such presets.

You can then easily recall any preset song/station by selecting its preset number.

The following input sources can be set as presets.

Server, Net Radio, USB and streaming services.

1 Playback a song or streaming station you

want to register.

2 Hold down MEMORY for more than 3

seconds.

The first time you register a song/station, you will be

prompted to register the selected song/station to

preset number “01”. You will be also prompted to

register each additional song/station you select to the

next available preset number.

y

To select a preset number for registering, press PRESET j / i or

the cursor keys (/).

3 Press MEMORY again to register preset.

y

To cancel registration, press RETURN.

1 Select NET, BLUETOOTH or USB as the input

source.

2 Press PRESET j / i to select a preset

number.

3 Press ENTER to recall preset.

y

• A few seconds after you select the preset number, playback of

the selected preset will start.

• To cancel recalling preset, press RETURN.

• Using the MusicCast CONTROLLER app (p. 3) enables you to

view a list of registered contents (song titles, radio broadcast

stations) and listen to them.

Registering the current playback song/station (Preset function)

Registering to a preset

LINE 1

CD

NET USB

BLUETOOTH

TUNER

TUNING

PRESET

MEMORY

MODE

BAND

DISPLAY

LINE 2 LINE 3

ENTER

DIMMER

SLEEP

SPEAKERS

COAXIAL

OPTICAL

BA

NET

BLUETOOTH

USB

ENTER

MEMORY

PRESET j / i

ENTER

Cursor keys  / 

SP A

01: E p y

MEMORY

Preset number

Recalling a preset

Sidan laddas ...

45 En

English

ADVANCED

OPERATION

You can configure the unit’s various functions.

1 Press SETUP.

2 Use the cursor keys ( / ) to select a menu.

3 Press ENTER.

4 Use the cursor keys ( / ) to select a

setting and press ENTER.

y

To return to the previous state during menu operations, press

RETURN.

5 Exit from the menu, press SETUP.

Configuring various functions (SETUP menu)

PRESET

MUTE

NOW PLAYING

RETURN

OPTION

VOLUME

MEMORY

ENTER

HOME

SETUP

ENTER

RETURN

SETUP

ENTER

Cursor keys

SP A

Ne ork

SETUP

SP A

Max Volu e

SETUP

SP A

MAX

MAX VOL

SETUP menu items

Menu item Function Page

Network

Connection Selects the network connection method. 46

Information Displays the network information on the unit. 46

IP Address Configures the network parameters (such as IP address). 46

DMC Control

Selects whether to allow a DLNA-compatible Digital Media Controller (DMC) to

control playback.

46

Standby

(Network Standby)

Selects whether to enable/disable the function that turns on the unit from other

network devices.

47

Network Name

Edits the network name (the unit’s name on the network) displayed on other network

devices.

47

Update

(Network Update)

Updates the firmware via the Internet. 47

Bluetooth

On/Off Enables/disables the Bluetooth functions. 47

Standby

(Bluetooth Standby)

Selects whether to enable/disable the function that turns on the unit from Bluetooth

devices (Bluetooth standby).

47

Audio Receive Receives audio data from the Bluetooth device. 47

Balance

Adjusts the sound output balance of the left and right speakers to compensate for

sound imbalances.

48

Max Volume Sets the maximum volume to prevent excessive loudness. 48

InitialVolume Sets the initial volume for when this receiver is turned on. 48

AutoPowerStby

(Auto Power

Standby)

On/Off Enables/disables the auto-standby function. 48

Sidan laddas ...

Yamaha R-N402 Silver Användarmanual

Yamaha R-N402 Silver Användarmanual

på andra språk

Relaterade papper

Andra dokument