Firmware Installation Procedure
Notice: Do not turn off the power of the instrument or remove the USB memory during this operation.
1
Download the firmware
1) Download the Zip file to the computer.
2) Connect the USB memory to your computer.
3) Extract the *.prg files included in the Zip file and copy them to the root directory of your USB
memory.
2
Connect the USB memory to the instrument
Connect the USB memory containing the downloaded files into the USB TO DEVICE terminal of the
instrument.
Notice: Make sure that the USB memory is properly connected to the terminal.
Excessive force or incorrect insertion may damage the terminal.
3
Install the firmware
Hold down the STYLE CONTROL [START/STOP] button on the panel and turn the power on
simultaneously.
Keep holding down the [START/STOP] button until the following message appears:
When the following message appears after a few moments, press the [START/STOP] button.
Press the [START/STOP] button again to start installation. A progress bar for installation
will appear.
When installation is complete, the following message appears with the new firmware version.
Press the power button on the instrument to turn it off and remove the USB memory from
the instrument.
Confirm the version number
CVP-609/605
1) Turn the instrument on and wait until the Home display appears.
2) Touch the [Menu] icon, and then touch the right-arrow icon to move the second Menu page.
3) Touch the [Utility] icon and touch the [System] tab.
4) Check that the version number is correct for the upgrade.
5) Press the [HOME] button to return to the Home display.
CVP-601
1) Turn the instrument on and wait until the main display appears.
2) Press the [FUNCTION] button, select [UTILITY], and then go to the [OWNER] tab.
3) Press the [7▲] or [8▲] button.
4) Check that the version number is correct for the upgrade.
5) Press the [8▲] (EXIT) button or the [EXIT] button to close the windows.
Troubleshooting
1)
The power supply was cut off or the USB memory was removed during operation.
A complete reinstall is necessary. Perform the operation again from the beginning.
2) The installation cannot be executed and an error message appears in the display.
Check the following:
✓ Is the USB memory inserted correctly?
✓ Is the USB connector free from dust or dirt?
✓ Is all required data located in the root directory of USB memory?
✓ Is the USB memory or the upgrade data itself damaged in some way?
✓ Does the data correspond to the instrument?
Try installing it again by using another USB memory.
-
1
-
2
Yamaha CVP-605 Bruksanvisning
- Typ
- Bruksanvisning
på andra språk
- italiano: Yamaha CVP-605 Manuale del proprietario
- čeština: Yamaha CVP-605 Návod k obsluze
- español: Yamaha CVP-605 El manual del propietario
- Deutsch: Yamaha CVP-605 Bedienungsanleitung
- polski: Yamaha CVP-605 Instrukcja obsługi
- português: Yamaha CVP-605 Manual do proprietário
- français: Yamaha CVP-605 Le manuel du propriétaire
- Türkçe: Yamaha CVP-605 El kitabı
- English: Yamaha CVP-605 Owner's manual
- dansk: Yamaha CVP-605 Brugervejledning
- русский: Yamaha CVP-605 Инструкция по применению
- suomi: Yamaha CVP-605 Omistajan opas
- Nederlands: Yamaha CVP-605 de handleiding
- română: Yamaha CVP-605 Manualul proprietarului