Samsung LE37R86BC Användarmanual

LCD TV

LE32R8

LE37R8

LE40R8

Owner’s Instructions

Before operating the unit,

please read this manual thoroughly,

and retain it for future reference.

ON-SCREEN MENUS

PC DISPLAY

PICTURE IN PICTURE (PIP)

TELETEXT

BN68-01169K-00

Contact SAMSUNG WORLDWIDE

If you have any questions or comments relating to Samsung products,

please contact the SAMSUNG customer care centre.

Ota yhteyttä Samsungiin

Jos sinulla on kysymyksiä tai kommentteja koskien Samsung tuotteita

voitte ottaa yhtyettä Samsung tukeen.

Country

Customer Care Centre

Web Site

BELGIUM 02 201 2418 www.samsung.com/be

CZECH REPUBLIC 844 000 844 www.samsung.com/cz

“Distributor pro Českou republiku:

Samsung Zrt., česka organizační složka Vyskočilova 4, 14000 Praha 4”

DENMARK 70 70 19 70 www.samsung.com/dk

FINLAND 030-6227 515 www.samsung.com/fi

FRANCE 3260 SAMSUNG(7267864) (€ 0,15/min) www.samsung.com/fr

GERMANY 01805-121213 (€ 0,14/Min) www.samsung.de

HUNGARY 06-80-SAMSUNG (7267864) www.samsung.com/hu

ITALIA 800 SAMSUNG(7267864) www.samsung.com/it

LUXEMBURG 0032 (0)2 201 24 18 www.samsung.lu

NETHERLANDS 0900 20 200 88 (€ 0,10/Min) www.samsung.com/nl

NORWAY 815-56 480 www.samsung.com/no

POLAND 0 801 801 881 www.samsung.com/pl

PORTUGAL 80 8 200 128 www.samsung.com/pt

REPUBLIC OF IRELAND 0818 717 100 www.samsung.com/uk

SLOVAKIA 0800-SAMSUNG (7267864) www.samsung.com/sk

SPAIN 902 10 11 30 www.samsung.com/es

SWEDEN 0771-400 200 www.samsung.com/se

SWITZERLAND 0800-7267864 www.samsung.com/ch

U.K 0870 SAMSUNG (7267864) www.samsung.com/uk

ESTONIA 800-7267 www.samsung.ee

LATVIA 800-7267 www.samsung.com/lv

LITHUANIA 8-800-77777 www.samsung.lt

KAZAKHSTAN 8 800 080 1188 www.samsung.kz

RUSSIA 8-800-200-0400 www.samsung.ru

UKRAINE 8-800-502-0000 www.samsung.com/ur

UZBEKISTAN 140-1234 www.samsung.uz

Kontakta SAMSUNG

Om du har några frågor eller synpunkter om Samsungs produkter,

är du välkommen att kontakta Samsung Support.

This product is only applicable in Finland. Its quality is not guaranteed in other countries.

Tämä tuote soveltuu vain Suomessa. Sen laatua ei taata muissa maissa

Den här produkten är endast tillämplig i Finland. Dess kvalitet garanteras inte i andra länder.

Register your product at www.samsung.com/global/register

Record your Model and Serial number here for future reference.

▪ Model _______________ ▪ Serial No. _______________

BN68-01169K-L03-Cover.indd 1 2007-04-30 �� 4:21:28

Precautions When Displaying a Still Image

A still image may cause permanent damage to the TV screen.

• Do not display a still image on the LCD panel for more than 2 hours as it can cause screen image retention.

This image retention is also known as "screen burn".

To avoid such image retention, reduce the degree of brightness and contrast of the screen when displaying a still image.

• Watching the LCD TV in 4:3 format for a long period of time may leave traces of borders displayed on the left, right and center of

the screen caused by the difference of light emission on the screen. Playing a DVD or a game console may cause a similar effect

to the screen. Damages caused by the above effect are not covered by the Warranty.

• Displaying still images from Video games and PC for longer than a certain period of time may produce partial after-images.

To prevent this effect, reduce the ‘brightness’ and ‘contrast’ when displaying still images.

BN68-01169K-Eng-0419.indd 1 2007-04-30 �� 4:31:26

Contents

CONNECTING AND PREPARING YOUR TV

List of Parts ........................................................ 3

Installing the Stand ............................................. 3

Installing the Wall Mount Kit ............................... 3

Viewing the Control Panel .................................. 4

Viewing the Connection Panel ........................... 5

Viewing the Remote Control............................... 7

Installing Batteries in the Remote Control .......... 8

Switching On and Off ......................................... 8

Placing Your Television in Standby Mode........... 8

Plug & Play ......................................................... 9

SETTING THE CHANNELS

Storing Channels Automatically ....................... 10

Storing Channels Manually ...............................11

Setting the Channel Lists ................................. 12

Activating the Child Lock .................................. 12

Sorting the Stored Channels ............................ 13

Assigning Channels Names ............................. 13

Fine Tuning Channel Reception ....................... 14

SETTING THE PICTURE

Changing the Picture Standard ........................ 15

Adjusting the Custom Picture ........................... 15

Changing the Colour Tone................................ 16

Activating Backlight .......................................... 16

Conguring Detailed Settings on the Picture ... 17

Changing the Picture Size ................................ 18

Freezing the Current Picture ............................ 19

Selecting the Screen Mode .............................. 19

Resetting the Picture Settings to the

Factory Defaults ............................................... 19

Digital NR / Active Colour / DNIe /

Movie Plus ....................................................... 20

Viewing the Picture In Picture (PIP) ................. 21

HDMI Black Level ............................................. 22



SETTING THE SOUND

Changing the Sound Standard ......................... 22

Adjusting the Sound Settings ........................... 23

Setting the TruSurround XT (SRS TS XT) ........ 23

Connecting Headphones .................................. 24

Selecting the Sound Mode ............................... 24

Adjusting the Volume Automatically ................. 24

Selecting the Internal Mute .............................. 25

Listening to the Sound of the Sub Picture ........ 25

Resetting the Sound Settings to the Factory

Defaults ............................................................ 26

SETTING THE TIME

Setting and Displaying the Current Time .......... 26

Setting the Sleep Timer .................................... 27

Switching the Television On and Off

Automatically .................................................... 27

FUNCTION DESCRIPTION

Choosing Your Language ................................. 28

Using Game Mode ........................................... 28

Setting the Blue Screen Mode / Selecting the

Melody ............................................................. 29

Setting the Home Theatre PC .......................... 29

Setting the Light Effect ..................................... 30

Using the Energy Saving Feature .................... 30

Selecting the Source ........................................ 31

Editing the Input Source Names ...................... 31



English - 1

English

BN68-01169K-Eng-0419.indd 1 2007-04-30 �� 4:31:26

English - 2

USING THE DTV FEATURE

Previewing the DTV Menu System .................. 32

Updating the Channel List Automatically .......... 33

Updating the Channel List Manually ................ 33

Editing Your Favourite Channels ...................... 34

Selecting Channel List ..................................... 36

Displaying Programme Information .................. 36

Viewing the EPG

(Electronic Programme Guide) Information ...... 37

Using the Scheduled List ................................. 38

Setting the Default Guide ................................. 38

Viewing All Channels and

Favourite Channels .......................................... 39

Adjusting the Menu Translucency .................... 40

Setting up the Parental Lock ............................ 40

Setting the Subtitle ........................................... 41

Setting the Subtitle Mode ................................. 41

Selecting the Audio Format .............................. 41

Selecting the Digital Text (UK only) .................. 42

Selecting the Time Zone (Spain only) .............. 42

Viewing Product Information ............................ 42

Checking the Signal Information ...................... 43

Upgrading the Software ................................... 43

Viewing Common Interface .............................. 44

Selecting the CI (Common Interface) Menu ..... 44

Resetting .......................................................... 45

Selecting the Preferred Language

(Audio, Subtitle or Teletext) .............................. 45

Preference ........................................................ 46



USING THE TELETEXT FEATURE

Teletext Decoder .............................................. 46

Displaying the Teletext Information .................. 47

Selecting a Specic Teletext Page ................... 47

Using Fastext to Select a Teletext Page........... 48

Setting Up Your Remote Control ...................... 48

Remote Control Codes ..................................... 49

SETTING THE PC

Setting up Your PC Software

(Based on Windows XP) .................................. 52

Display Modes .................................................. 52

Setting the PC .................................................. 53

Wall-Mount Adjustment (LE40R8)

(Sold separately) .............................................. 54

ABOUT ANYNET

+

What is Anynet+? ............................................ 55

Connecting Anynet

+

Devices ........................... 55

Setting Up Anynet

+

.......................................... 56

Scanning and Switching between Anynet+

Devices ............................................................ 56

Recording ......................................................... 57

Listening through a Receiver ........................... 58

Check Points before Requesting Service ......... 58

RECOMMENDATIONS FOR USE

Using the Anti-Theft Kensington Lock .............. 59

Troubleshooting: Before Contacting Service

Personnel ......................................................... 59

Technical and Environmental Specications ... 60



Symbol Press Important Note One-Touch

Button

BN68-01169K-Eng-0419.indd 2 2007-04-30 �� 4:31:27

English - 3

List of Parts

Please make sure the following items are included with your LCD TV.

If any items are missing, contact your dealer.

M4 X L16

Remote Control

& Batteries

(AAA x 2)

Power Cord Cover-Bottom

Stand Screw

X 4

Stand Cleaning Cloth



Owner’s Instructions



Warranty card



Safety Guide



Registration Cards

< 2 >

< 3 >

1. Place the TV faced down on a soft cloth or cushion on a table.

2. Put the stand into the hole at the bottom of the TV.

3.

Insert screw into the hole indicated and tighten.

The stand is installed for models with the screen size of 37 inch and above.

Installing the Stand

Warranty card / Safety Guide /

Registration Cards (Not available in all locations)

The stand and stand screw may not be included depending on the model.

Wall mount items (sold separately) allow you to mount

the TV on the wall.

For detailed information on installing the wall mount,

see the instructions provided with the Wall Mount items.

Contact a technician for assistance when installing the

wall mounted bracket.

Samsung Electronics is not responsible for any damage

to the product or injury to yourself or others

if you elect to install the TV on your own.

Do not install your Wall Mount Kit while your TV

is turned on. It may result in personal injury due

to electric shock

Remove the stand and cover the bottom hole with a

cap and fasten with two screws.

Installing the Wall Mount Kit

BN68-01169K-Eng-0419.indd 3 2007-04-30 �� 4:31:29

English - 4

Viewing the Control Panel

1 SOURCE

Toggles between all the available input

sources (TV, Ext.1, Ext.2, AV, S-Video,

Component, PC, HDMI1, HDMI2, HDMI3,

DTV). In the on-screen menu, use this button

as you use the ENTER/OK button on the

remote control.

2 MENU

Press to see an on-screen menu of your TV’s

features.

In case of DTV mode, the DTV menu

appears.

3

Press to decrease or increase the volume.

In the on-screen menu, use the

buttons as you use the



and



buttons on

the remote control.

4

Press to change channels.

In the on-screen menu, use the

buttons as you use the

5

and

6

buttons on

the remote control.

(Without the Remote Control, you can turn on

the TV by using the Channel buttons.)

5 (Power)

Press to turn the TV on and off.

Power Indicator

Blinks and turns off when the power is on and

lights up in stand-by mode.

6 Remote Control Sensor

Aim the remote control towards this spot on

the TV.

7 Speakers

The product colour and shape may vary depending on the model.

Front Panel buttons

Touch the right side of

each button to operate.

1

2

3

4

5

6

7

[LE32R86, LE37R86, LE40R86,

LE32R88, LE37R88, LE40R88]

1

2

3

4

5,6

7

[LE32R87, LE37R87, LE40R87,

LE32R89, LE37R89, LE40R89]

BN68-01169K-Eng-0419.indd 4 2007-04-30 �� 4:31:31

English - 5

Viewing the Connection Panel

Whenever you connect an external device to your TV, make sure that power on the unit is turned off.

When connecting an external device, match the colour of the connection terminal to the cable.

1 Connecting Set-Top Box, VCR or DVD

-Inputs or outputs for external devices, such as VCR, DVD, video game device or video disc players.

2 Connecting AUDIO

- Connect RCA audio cables to "R - AUDIO - L" on the rear of your set and the other ends to

corresponding audio in connectors on the Amplifier or DVD Home Theater.

3 HDMI IN 1,HDMI IN 2, HDMI IN 3

- Supports connections between HDMI-connection-enabled AV devices (Set-Top Boxes, DVD

players)

- No additional Audio connection is needed for an HDMI to HDMI connection.

What is HDMI?

- “High Definition Multimedia interface” allows the transmission of high definition digital video data

and multiple channels of digital audio (5. 1 channels).

- The HDMI/DVI terminal supports DVI connection to an extended device with the appropriate cable

(not supplied). The difference between HDMI and DVI is that the HDMI device is smaller in size,

has the HDCP (High Bandwidth Digital Copy Protection) coding feature installed, and supports

multi - channel digital audio.

DVI IN (HDMI 2) (AUDIO R/L)

- When connecting this product via HDMI or DVI to a Set Top Box, DVD Player or Games Console

etc, make sure that it has been set to a compatible video output mode as shown in the table

below. Failure to observe this may result in picture distortion, image breakup or no picture.

- When using an HDMI/DVI cable connection, it is only possible from the HDMI 2 terminal.

You should use the DVI-to-HDMI cable or DVI-HDMI Adapter for the connection, and the

“R - AUDIO - L” terminal on DVI for sound output.

Supported modes for HDMI/DVI and Component

Connector

EXT 1

EXT 2

Video

Audio (L/R)

RGB

Output

Video + Audio (L/R)

Only TV or DTV output is available.

Output you can choose.

Input

Power Input

1 2 3 4

5

3

6

7890!@

HDMI/DVI 50Hz

HDMI/DVI 60Hz

Component

480i

X

O

480p

X

O

576i

X

O

576p

O

X

O

720p

O

1080i

O

The product colour and shape may vary depending on the model.

BN68-01169K-Eng-0419.indd 5 2007-04-30 �� 4:31:32

English - 6

4 Connecting an Aerial or Cable Television Network

To view television channels correctly, a signal must be received by the set from one of the following

sources:

- An outdoor aerial / A cable television network / A satellite network

5 Connecting CI (Common Interface) CARD

- When not inserting "CI CARD" in some channels,"Scrambled Signal" is displayed on the screen.

- The pairing information containing a telephone number, CI CARD ID, Host ID and other information

will be displayed in about 2~3 minutes. If an error message is displayed, please contact your

service provider.

- When the channel information configuration has finished, the message "Updating Completed" is

displayed, indicating that the channel list is now updated.

You must obtain a CI CARD from a local cable service provider.

Remove the CI CARD by carefully pulling it out with your hands since dropping the CI CARD

may cause damage to it.

Insert the CI-Card in the direction marked on it.

7 Connecting External A/V Devices

- Connect RCA or S-VIDEO cable to an appropriate external A/V device such as VCR, DVD or

Camcorder.

- Connect RCA audio cables to "R - AUDIO - L" on the rear of your set and the other ends to corre

sponding audio out connectors on the A/V device.

- Headphone may be connected to the headphone output (

6) on the rear of your set. While the

head phone is connected, the sound from the built-in speakers will be disabled.

8 Connecting Computer

- Connect the D- Sub cable (optional) to "PC (PC IN)" on the rear of your set and the other end to

the Video Card of your computer.

- Connect the stereo audio cable (optional) to "AUDIO (PC IN)" on the rear of your set and the other

end to "Audio Out" of the sound card on your computer.

9 DIGITAL AUDIO OUT (OPTICAL)

- Connect to a Digital Audio Component.

0 SERVICE

- Service connection for qualified service engineer.

! Connecting Component Devices (DTV/DVD)

- Connect component video cables (optional) to component connector ("P

R

", "P

B

", "Y") on the rear of

your set and the other ends to corresponding component video out connectors on the DTV or DVD.

- If you wish to connect both the Set-Top Box and DTV (or DVD), you should connect the Set-Top Box

to the DTV (or DVD) and connect the DTV (or DVD) to component connector ("P

R

", "P

B

", "Y") on your

set.

- The P

R

, P

B

and Y connectors on your component devices (DTV or DVD) are sometimes labeled Y,

B-Y and R-Y or Y, Cb and Cr.

- Connect RCA audio cables (optional) to "R - AUDIO - L" on the rear of your set and the other ends

to corresponding audio out connectors on the DTV or DVD.

- This LCD TV displays its optimum picture resolution in 720p mode.

- This LCD TV displays its maximum picture resolution in 1080i mode.

@ Kensington Lock

- The Kensington lock (optional) is a device used to physically fix the system when used in a public

place.

- If you want to use a locking device, contact the dealer where you purchased the TV.

- The place of the Kensington Lock may be different depending on its model.

BN68-01169K-Eng-0419.indd 6 2007-04-30 �� 4:31:32

English - 7

1 Selects a target device to be

controlled by the Samsung

remote control (TV, DVD,

STB, CABLE, VCR)

(Refer to page 49~51)

2 Television Standby button

3 Number buttons for direct

channel access

4

One/Two-digit channel

selection

5 It display "Channel List"

on the screen.

6 Selects the TV and DTV

mode directly

7 VCR/DVD Functions

Rewind, Stop, Play/Pause,

Fast/Forward

8 Volume increase

Volume decrease

9 Temporary sound switch-off

0 Menu display and

change confirmation

! Returns to the previous

menu

# Electronic Program Guide

(EPG) display

$ Picture size selection

% Sound effect selection

^

Adjusts 5 separate devices

- TV, DVD, STB, CABLE, or

VCR

.

& When pressing this button, a

number of buttons on the

remote control (e.g. Selects

a target device, volume,

channel buttons) light up

for a few seconds and then

turn off to save power. This

function is to conveniently use

the remote control at night or

when dark.

* Available source selection

( Previous channel

) DTV menu display

a Records for Live

Broadcasting

(Anynet+ function only)

(Refer to page 57)

b P : Next channel

P

: Previous channel

c Exit the OSD

d Control the cursor in the

menu

e Use to see information on

the current broadcast

f Runs the Anynet view

functions and sets up Anynet

devices.

g Colour buttons :

Press to add or delete

channels and to store

channels to the favorite

channel list in the “Channel

List” menu.

h Picture-In-Picture On / Off

i Digital subtitle display

j Picture effect selection

k Picture freeze

l When your remote does not

work, change the batteries

and press the "RESET"

button for 2-3 seconds before

use.

Teletext Functions

6 Exit from the teletext display

0 Teletext index

@ Alternately select Teletext,

Double, or Mix.

$ Teletext size selection

* Teletext mode selection

(LIST/FLOF)

( Teletext sub page

b P : Teletext next page

P

: Teletext previous page

c Teletext cancel

e Teletext reveal

g Fastext topic selection

h Teletext hold

j Teletext store

The performance of the remote control may be affected by bright light.

This is a special remote control for the visually impaired, and has Braille points on the Power,

Channel, STOP, PLAY/PAUSE and Volume buttons.

Viewing the Remote Control

BN68-01169K-Eng-0419.indd 7 2007-04-30 �� 4:31:33

English - 8

1. Lift the cover at the back of the remote control upward as shown in the

figure.

2. Install two AAA size batteries.

Make sure to match the "+" and "–" ends of the batteries with the

diagram inside the compartment.

3. Replace the cover.

Remove the batteries and store them in a cool, dry place if you won’t be

using the remote control for a long time. The remote control can be used

up to about 23 feet from the TV.

(Assuming typical TV usage, the batteries last for about one year.)

If the remote control doesn’t work, check the following:

1. Is the TV power on?

2. Are the plus and minus ends of the batteries reversed?

3. Are the batteries drained?

4. Is there a power outage, or is the power cord unplugged?

5. Is there a special fluorescent light or neon sign nearby?

Installing Batteries in the Remote Control

Switching On and Off

The mains lead is attached to the rear of your set.

1. Plug the mains lead into an appropriate socket.

The standby indicator lights up on the front of the set.

2. Press the button on the front of the set.

You also can press the POWER button or the TV/DTV button on the remote control to turn

the TV on.

The programme that you were watching last is reselected automatically.

3. Press the numeric button (0~9) or channel up/down ( / ) button on the remote control or

button on the right side of the set.

When you switch the set on for the very first time, you will be asked to choose language in

which the menus are to be displayed.

4. To switch your set off, press the POWER

button again.

Your set can be placed in standby mode in order to reduce the power consumption. The standby

mode can be useful when you wish to interrupt viewing temporarily (during a meal, for example).

1. Press the POWER button on the remote control.

The screen is turned off and a red standby indicator appears on the front of your set.

2. To switch your set back on, simply press the POWER , numeric buttons (0~9), TV/DTV button or

channel up/down ( / ) button again.

Do not leave your set in standby mode for long periods of time (when you are away on holiday, for

example).

It is best to unplug the set from the mains and aerial.

Placing Your Television in Standby Mode

BN68-01169K-Eng-0419.indd 8 2007-04-30 �� 4:31:34

English - 9

When the TV is initially powered on, several basic settings

proceed automatically and subsequently. The following

settings are available.

Any functions related to Digital TV (DVB) will only work in

countries or areas where DVB-T (MPEG2) digital terrestrial

signals are broadcasted. Please confirm with your local

dealer if you can receive DVB-T signals. Although this TV set

follows the DVB-T specification, maintaining compatibility with

the future coming DVB-T digital terrestrial broadcasts is not

guaranteed. Several functions may not be available in some

countries.

This product is only applicable to Finnish broadcasts. Broadcasts are not supported in other

countries.

1. Press the POWER button on the remote control.

The message "Start Plug & Play" is displayed with "OK" selected.

2. Select the appropriate language by pressing the

▲

or

▼

buttons.

Press the ENTER/OK

button to confirm your choice.

3. Press the

◄

or

►

buttons to select “Shop” or “Home”, then the ENTER/OK button.

We recommend setting the TV to Home mode for the best picture in your home environment.

Shop mode is only intended for use in retail environments.

If the unit is accidentally set to Shop mode and you want to return to Dynamic (Home) mode,

press the Volume button and then hold down the

MENU button for five seconds on the side

panel of the TV.

4. The message "Check antenna input." is displayed with "OK" selected.

Press the ENTER/OK

button.

Please check that the antenna cable is connected correctly.

5. Select the appropriate country by pressing the

▲

or

▼

button.

Press the ENTER/OK

button to confirm your choice.

6.

The "Auto Store" menu is displayed with the "Start" selected. Press the

ENTER/OK

button.

The channel search will start and end automatically.

The DTV channel scan menu appears and the DTV channel is automatically updated.

If the DTV channel is updated, the Source in the source list of the Input menu is automatically

changed to DTV.

After all the available channels are stored, the "Clock Set" menu appears.

Press the ENTER/OK button at any time to interrupt the memorization process.

For detailed descriptions about DTV channel update, refer to page 33 of this manual.

After all the available digital channels are stored, the screen to select a time zone is displayed

depending on the country.

7. Press the ENTER/OK button.

Select the "Month", "Day", "Year", "Hour" and "Minute" by pressing the

◄

or

►

buttons.

Set the "Month", "Day", "Year", "Hour" and "Minute" by pressing the

▲

or

▼

buttons.

You can also set the hour and minute by pressing the number buttons on the remote control.

8. Press the ENTER/OK button to confirm your setting.

Plug & Play



Language

: Select your language.



Country

: Select your country.



Auto Store

: Automatically scans for and stores channels available in the local area.



Clock Set

: Sets the current time for the TV clock.

Plug & Play

Start Plug & Play.

Enter Exit

OK

BN68-01169K-Eng-0419.indd 9 2007-04-30 �� 4:31:35

English - 10

If you want to reset this feature...

1. Press the MENU button to display the menu.

Press the

▲

or

▼

button to select "Setup", then press the

ENTER/OK button.

2. Press the ENTER/OK button again, to select "Plug & Play".

3. The message "Start Plug & Play" is displayed.

- Storing Channels Automatically

- Storing Channels Manually

TV

Channel

Country : Belgium



Auto Store 

Manual Store



Channel Manager 

Sort 

Name 

Fine Tune



You can scan for the frequency ranges available to you (and availability depends on your country).

Automatically allocated programme numbers may not correspond to actual or desired programme

numbers. However, you can sort numbers manually and clear any channels you do not wish to watch.

1. Press the MENU button to display the menu.

Press the

▲

or

▼

button to select "Channel", then press the ENTER/OK button.

2. Press the ENTER/OK

button to select "Country".

3. Select the appropriate country by pressing the

▲

or

▼

button.

Press the ENTER/OK button to confirm your choice.

Even though you have changed the country setting in this menu, the country setting for DTV is not

changed. Use the Plug & Play function to change the country setting for DTV.

(Refer to page 9)

4. Press the

▲

or

▼

button to select "Auto Store", then press the ENTER/OK button.

5. Press the ENTER/OK

button.

The TV will begin memorizing all of the available channels.

Press the ENTER/OK button at any time to interrupt the memorization process and return to the

"Channel" menu.

6. After all the available channels are stored, the "Sort" menu appears.

Storing Channels Automatically

TV

Setup

Plug & Play



Language : English



Time 

Game Mode : Off 

Blue Screen : Off



Melody : Off 

PC



Home Theatre PC

: Off 

Light Effect :

Watchung Mode On



More

Move Enter Return

Plug & Play

Start Plug & Play.

Enter Return

OK

BN68-01169K-Eng-0419.indd 10 2007-04-30 �� 4:31:37

English - 11

 Programme: Selects a program number for the channel.

 Colour System: Sets the colour supporting system.

 Sound System: Sets the sound supporting system.

 Channel: Selects a channel.

 Search: Scans for the frequency value for the channel.

 Store: Saves your settings.

Storing Channels Manually

You can store up to 100 channels, including those received via cable networks.

When storing channels manually, you can choose:

Whether or not to store each of the channels found.

The programme number of each stored channel which you wish to identify.

1. Press the MENU button to display the menu.

Press the ▲ or ▼ button to select "Channel", then press the ENTER/OK button.

2. Press the ▲ or ▼ button to select "Manual Store", then press the ENTER/OK button.

3. Press the ENTER/OK

button to select "Programme".

4. To assign a programme number to a channel, find the correct number by pressing the ▲ or ▼

button and then press the ENTER/OK button.

You can also set a programme number by pressing number buttons on the remote control.

5. Press the ▲ or ▼ button to select "Colour System", then press the ENTER/OK

button.

6.

Select the colour standard required by pressing the ▲ or ▼ button then, press the ENTER/OK button.

7. Press the ▲ or ▼ button to select "Sound System", then press the ENTER/OK button.

8.

Select the sound standard required by pressing the ▲ or ▼ button, then press the ENTER/OK button.

If there is an abnormal sound or no sound, re-select the sound system required.

9. If you know the number of the channel to be stored, press the ▲ or ▼ button to select "Channel".

Press the ENTER/OK button. Select C (Air channel) or S (Cable channel) by pressing the 5 or 6

button. Press the  button to select channel.

Select the required number by pressing the ▲ or ▼ button and then press the ENTER/OK button.

Channel mode: P (Programme mode), C (Air channel mode), S (Cable channel mode)

You can also set a channel number by pressing number buttons on the remote control.

10.

If you do not know the channel numbers, press the ▲ or ▼ button to select "Search".

Press the ENTER/OK button. Search by pressing the ▲ or ▼ button and then press the ENTER/OK button.

11. Press the ▲ or ▼ button to select "Store". Press the ENTER/OK button to select "OK".

12. Repeat steps 3 to 11 for each channel to be stored.

BN68-01169K-Eng-0419.indd 11 2007-04-30 �� 4:31:37

English - 12

Set the channels according to your preference.

You can easily delete, add, or lock the channel you want.

1. Press the MENU button to display the menu.

Press the

▲

or

▼

button to select "Channel", then press the

ENTER/OK button.

2. Press the

▲

or

▼

button to select "Channel Manager",

then press the ENTER/OK button.

3. Press the ENTER/OK button again, to select "Channel

List".

4. Press the

►

button to select " " line.

5. Press the

▲

or

▼

button to select the undesired channel,

then press the ENTER/OK button to cancel.

6. Repeat steps 5 for each channel to be selected or canceled

7. Press the EXIT

button to exit.

" " is active when "Child Lock" is selected to "On".

You can select these options by simply pressing the CH LIST

button on the remote control

Setting the Channel Lists

This feature allows you to prevent unauthorized users, such

as children, from watching unsuitable programmes by muting

out video and audio.

Child Lock cannot be released using the buttons on the side.

Only the remote control can release the Child Lock setting,

so keep the remote control away from children.

1. Press the MENU button to display the menu.

Press the

▲

or

▼

button to select "Channel", then press the

ENTER/OK button.

2. Press the

▲

or

▼

button to select "Channel Manager",

then press the ENTER/OK button.

3. Press the

▲

or

▼

button to select "Child Lock", then press

the ENTER/OK button.

4. Press the

▲

or

▼

button to select "On" or "Off". Press the

ENTER/OK button.

5. Press the

▲

or

▼

button to select "Channel List",

then press the ENTER/OK button.

6. Press the

►

button to select " " line.

7. Press the

▲

or

▼

button to select the channels you want to

lock, then press the ENTER/OK button.

8. Repeat steps

7 for each channel to be locked or unlocked.

9. Press the EXIT button to exit.

Select "On" or "Off" in "Child Lock" to easily turn the channels

which selected on " " to be active or inactive.

Activating the Child Lock

TV

Channel Manager

Channel List

Child Lock :

Off

On

P 1 C3

Channel List

Move Enter

Page Return

Add Lock

1 / 10

Prog.

0 C--

1 C3

2 BBC 1

3 C74

4 C75

5 C76

6 S3

7 S4

8 S6

9 S7

P 2 C4 BBC1

Channel Liat

Move Enter

Page Return

Add Lock

1 / 10

Prog.

0 C--

1 C3

2 BBC 1

3 C74

4 C75

5 C76

6 S3

7 S4

8 S6

9 S7

Move Enter Return

BN68-01169K-Eng-0419.indd 12 2007-04-30 �� 4:31:39

English - 13

You can exchange the numbers of two channels, in order to:

Modify the numeric order in which the channels have

been automatically stored.

Give easily remembered numbers to the channels

that you watch most often.

1.

Press the MENU button to display the menu. Press the

▲

or

▼

button to select "Channel", then press the ENTER/OK button.

2. Press the

▲

or

▼

button to select "Sort", then press the

ENTER/OK button.

3. Select the channel number that you wish to change by press

ing the

▲

or

▼

button repeatedly. Press the ENTER/OK

button.

The selected channel number and name are moved to

right side.

4. Press the

▲

or

▼

button to move to the position in which you

would like to change and then press the ENTER/OK button.

The selected channel is exchanged with the one

previously stored to the chosen number.

5. Repeat steps 3 to 4 for another channel to be sorted.

6. Press the EXIT

button to exit.

Sorting the Stored Channels

Assigning Channels Names

Channel names will be assigned automatically when channel

information is broadcast. These names can be changed,

allowing you to assign new names.

1. Press the MENU button to display the menu.

Press the

▲

or

▼

button to select "Channel", then press the

ENTER/OK button.

2. Press the

▲

or

▼

button to select "Name", then press the

ENTER/OK button.

3. If necessary, select the channel to be assigned to a new

name by pressing the

▲

or

▼

button. Press the ENTER/OK

button.

The selection bar is displayed around the name box.

4.

The characters available are : Letters of the alphabet (A~Z) / Numbers (0~9) /

Special characters ( -, space)

5. Repeat steps

3 to 4 for each channel to be assigned to a new name.

6. Press the EXIT

button to exit.

To...

Select a letter, number or symbol

Move on the next letter

Move back the previous letter

Confirm the name

Then...

Press the ▲ or ▼ button

Press the ► button

Press the ◄ button

Press the ENTER/OK button

Channel

Country : Belgium



Auto Store 

Manual Store



Channel Manager 

Sort



Name 

Fine Tune 

TV

Move Enter Return

Sort

Prog. Ch. Name



0 C--

1 C23



2 C16

3 C3

4 S1



TV

Move Enter Return

Channel

Country : Belgium



Auto Store 

Manual Store



Channel Manager 

Sort 

Name



Fine Tune 

Move Enter Return

TV

Name

Move Enter Return

Prog. Ch. Name



0 C-- -----

1 C23 -----

2 C16

-----

3 C3

-----

4 S1

-----



TV

BN68-01169K-Eng-0419.indd 13 2007-04-30 �� 4:31:42

English - 14

Use fine tuning to manually adjust a particular channel for

optimal reception.

1. Use the number buttons to directly select the channel that

you want to fine tune.

2. Press the MENU button to display the menu.

Press the

▲

or

▼

button to select "Channel", then press the

ENTER/OK button.

3. Press the

▲

or

▼

button to select "Fine Tune", then press

the ENTER/OK button.

4. Press the

◄

or

►

button to adjust the fine tuning.

Press the ENTER/OK button.

5. Press the EXIT

button to exit.

Fine tuned channels that have been saved are marked with

an asterisk "*" on the right-hand side of the channel number

in the channel banner. And the channel number turns red.

To reset the fine-tuning, select "Reset" by pressing the

▲

or

▼

button and then press the ENTER/OK button.

Fine Tuning Channel Reception

Channel

Country : Belgium



Auto Store 

Manual Store 

Channel Manager



Sort



Name 

Fine Tune 

Fine Tune

P 1

0

Reset

TV

Move Enter Return

Adjust Save Return

BN68-01169K-Eng-0419.indd 14 2007-04-30 �� 4:31:43

English - 15

You can select the type of picture which best corresponds to

your viewing requirements.

1. Press the MENU button to display the menu.

Press the ENTER/OK button, to select "Picture".

2. Press the ENTER/OK button again, to select "Mode".

3. Press the

▲

or

▼

button to select the desired picture effect.

Press the ENTER/OK button.

4. Press the EXIT

button to exit.

 Dynamic: Selects the picture for high-definition in a bright

room.

 Standard: Selects the picture for optimum display in a

normal environment.

 Movie: Selects the picture for comfortable display in a

dark room.

The Picture mode must be adjusted separately for each input

source.

You can return to the factory defaults picture settings by

selecting the "Reset".

(Refer to "Resetting the Picture Settings to the Factory

Defaults" on page 19)

Changing the Picture Standard

 Contrast: Adjusts the lightness and darkness between objects and the background.

 Brightness: Adjusts the brightness of the whole screen.

 Sharpness: Adjusts the outline of objects to either sharpen them or make them more dull.

 Colour: Adjusts the colours, making them lighter or darker.

 Tint (NTSC or DTV only):

Adjusts the colour of objects, making them more red or green for a more

natural look.

Your set has several settings which allow you to control

picture quality.

1. To select the desired picture effect, follow the

"Changing the Picture Standard" instructions number 1 to 3.

2. Press the

▲

or

▼

button to select a particular item. Press the

ENTER/OK button.

3. Press the

◄

or

►

button to decrease or increase the value of

a particular item. Press the ENTER/OK button.

4. Press the EXIT

button to exit.

Adjusting the Custom Picture

The adjusted values are stored according to the selected Picture mode.

In PC Mode, Only "Contrast" and "Brightness" can be adjusted.

“Tint” function is available only in “HDMI” and “Component” mode.

You can also press the

P.MODE button on the remote

control to select one of the

picture settings.

Picture

Mode : Dynamic



Contrast 100

Brightness 45

Sharpness

75

Colour

55

Tint G50 R50

Colour Tone : Cool1 

Detailed Settings 

Backlight : 10



More

TV

Move Enter Return

Picture

Mode : Dynamic

Contrast

100

Brightness 45

Sharpness

75

Colour 55

Tint G50 R50

Colour Tone : Cool1

Detailed Settings

Backlight : 10

More

TV

Move Enter Return

Dynamic

Standard

Movie

Picture

Mode : Dynamic



Contrast 100

Brightness

45

Sharpness 75

Colour 55

Tint G50 R50

Colour Tone : Cool1



Detailed Settings 

Backlight : 10



More

TV

Move Enter Return

BN68-01169K-Eng-0419.indd 15 2007-04-30 �� 4:31:46

English - 16

Changing the Colour Tone

You can select the most comfortable colour tone to your

eyes.

1. To select the desired picture effect, follow the

"Changing the Picture Standard" instructions number 1 to 3.

(On page 15)

2. Press the 5 or 6 button to select "Colour Tone", then press

the ENTER/OK button.

3. Press the

5 or 6 button to select the desired colour tone

setting. Press the ENTER/OKbutton.

4. Press the EXIT

button to exit

 Cool2: Makes the colour temperature bluer than "Cool1"

menu.

 Cool1: Makes whites bluish.

 Normal: Keeps whites white.

 Warm1: Makes whites reddish.

 Warm2: Makes the colour temperature redder than

"Warm1" menu.

The adjusted values are stored according to the selected Picture mode.

When the picture mode is set to Dynamic or Standard, Warm1 and Warm2 cannot be selected.

Picture

Mode : Dynamic



Contrast 100

Brightness

45

Sharpness 75

Colour

55

Tint G50 R50

Colour Tone : Cool1 

Detailed Settings



Backlight : 10 

More

TV

Move Enter Return

Picture

Mode : Dynamic

Contrast

100

Brightness 45

Sharpness 75

Colour

55

Tint G50 R50

Colour Tone : Cool1

Detailed Settings

Backlight : 10

More

TV

Move Enter Return

Cool 2

Cool 1

Normal

Warm 1

Warm 2

You can adjust the screen brightness by adjusting the LCD

backlight brightness. (0~10)

Activating Backlight

1. To select the desired picture effect, follow the

"Changing the Picture Standard" instructions number 1 to 3.

(On page 15)

2. Press the ▲ or ▼ button to select “Backlight”, then press the

ENTER/OK button.

3. Press the ◄ or ► button to decrease or increase the value of

a particular item.

4. Press the ENTER/OK button.

Press the EXIT

button to exit.

Picture

Mode : Dynamic



Contrast 100

Brightness

45

Sharpness 75

Colour 55

Tint G50 R50

Colour Tone : Cool1



Detailed Settings 

Backlight : 10



More

TV

Move Enter Return

10

Backlight

Adjust Return

BN68-01169K-Eng-0419.indd 16 2007-04-30 �� 4:31:48

English - 17

You can set detailed picture settings.

1.

Press the MENU button to display the menu.

2.

Press the ENTER/OK button, to select "Picture".

3. Press the ▲ or ▼ button to select "Detailed Settings", then

press the ENTER/OK

button.

4. Select the required option by pressing the ▲ or ▼ button,

then press the ENTER/OK

button.

Available options: Black Adjust, Dynamic Contrast, Gamma,

White Balance, My Colour Control, Edge Enhancement,

Colour Space

5.

When you are satisfied with your setting, press the

ENTER/OK button.

6.

Press the EXIT button to exit.

When the picture mode is set to Movie or Standard, Detailed

Settings can be selected.

If DNIe is Off, the Detailed Settings cannot be selected when

the Picture mode is in Standard mode.

 Black Adjust: Off/Low/Medium/High

You can directly select the black level on the screen to adjust the screen depth.

 Dynamic Contrast: Off/Low/Medium/High

You can adjust the screen contrast so that the optimal contrast is provided.

 Gamma: -3 ~ +3

You can adjust the middle brightness of pictures.

Press the ◄ or ► button until you reach the optimal setting.

 White Balance: R Offset/G Offset/B Offset/R Gain/G Gain/B Gain/Reset

You can adjust the color temperature for more natural picture colors.

R Offset/G Offset/B Offset/R Gain/G Gain/B Gain: Changing the adjustment value will refresh the

adjusted screen.

Select the required option by pressing the ▲ or ▼ button, then press the ENTER/OK button.

Press the ◄ or ► button until you reach the optimal setting.

Reset: The previously adjusted white balance will be reset to the factory defaults.

 My Colour Control: Pink/Green/Blue/White/Reset

This setting can be adjusted to suit your personal preferences.

Pink/Green/Blue/White: Changing the adjustment value will refresh the adjusted screen.

Select the required option by pressing the ▲ or ▼ button, then press the ENTER/OK button.

Press the ◄ or ► button until you reach the optimal setting.

Reset: The previously adjusted colours will be reset to the factory defaults.

 Edge Enhancement: Off/On

You can emphasize object boundaries.

 Colour Space: Auto/Wide

You can set the color reproduction space for the input signal to Auto or Wide.

Conguring Detailed Settings on the Picture

Detailed Settings

Black Adjust : Off



Dynamic Contrast

: Off 

Gamma : 0



White Balance 

My Colour Control 

Edge Enhancement

: Off 

Colour Space

: Auto 

Move Enter Return

TV

Picture

Mode : Movie



Contrast 80

Brightness

45

Sharpness 10

Colour

53

Tint G50 R50

Colour Tone : Warm 2 

Detailed Settings



Backlight : 0 

More

TV

Move Enter Return

BN68-01169K-Eng-0419.indd 17 2007-04-30 �� 4:31:50

English - 18

 Auto Wide: Automatically adjusts the picture size to the "16:9"

aspect ratio.

 16:9: Adjusts the picture size to 16:9 appropriate for DVDs or

wide broadcasting.

 Wide Zoom: Magnify the size of the picture more than 4:3.

 Zoom: Magnifies the 16:9 wide picture (in the vertical direction)

to fit the screen size.

 4:3: This is the default setting for a video movie or normal

broadcasting.

 Just Scan: Displays the input scenes as they are without any

cutoff when HDMI 720p,1080i signals are input.

You can select the picture size which best corresponds to

your viewing requirements.

1. Press the MENU button to display the menu.

Press the ENTER/OK button, to select "Picture".

2. Press the

▲

or

▼

button to select "Size", then press the

ENTER/OK button.

3. Select the required option by pressing the

▲

or

▼

button.

Press the ENTER/OK button.

4. Press the EXIT

button to exit.

"Auto Wide" function is available only in "TV", "Ext.1", "Ext.2",

"AV", and "S-Video" mode.

In PC Mode, only "16:9" and "4:3" mode can be adjusted.

Zoom : Select by pressing the

◄

or

►

buttons.

Use the

▲

or

▼

button to move the picture up and

down. After selecting , use the

▲

or

▼

button to

magnify or reduce the picture size in the vertical direc-

tion.

Wide Zoom : Move the screen up/down using the

▲

or

▼

but-

tons after selecting the by pressing the

►

or

ENTER/OK button.

Changing the Picture Size

You can select these options

by simply pressing the P.SIZE

button on the remote control.

Size

Auto Wide

16 : 9

Wide Zoom

Zoom

4 : 3

Just Scan

Picture

Size : Auto Wide



Screen Mode : 16 : 9



Digital NR : Off 

Active Colour : Off 

DNle : Off



Movie Plus : Off 

Reset : OK 

More

Move Enter Return

TV

BN68-01169K-Eng-0419.indd 18 2007-04-30 �� 4:31:51

Sidan laddas ...

Samsung LE37R86BC Användarmanual

Samsung LE37R86BC Användarmanual

på andra språk

Relaterade papper

Andra dokument