LXE MX5A3856 Användarmanual

Typ
Användarmanual

Denna manual är också lämplig för

MX5 Multi-Charger Users Guide
Models MX5A385CHGR6US and MX5A385CHGR6WW
For Use with LXE MX5A379BATT Lithium Ion Battery Packs
Copyright © November 2006 by LXE, Inc.
All Rights Reserved
E-EQ-MX5CHGROG-D
Notice
LXE Inc. reserves the right to make improvements or changes in the products described in this manual at any time without
notice. While reasonable efforts have been made in the preparation of this document to assure its accuracy, LXE assumes no
liability resulting from any errors or omissions in this document, or from the use of the information contained herein. Further,
LXE Incorporated, reserves the right to revise this publication and to make changes to it from time to time without any obligation
to notify any person or organization of such revision or changes.
Copyright Notice:
This manual is copyrighted. All rights are reserved. This document may not, in whole or in part, be copied, photocopied,
reproduced, translated or reduced to any electronic medium or machine-readable form without prior consent, in writing, from
LXE Inc. Further, LXE Incorporated, reserves the right to revise this publication and to make changes to it from time to time
without any obligation to notify any person or organization of such revision or changes.
Copyright © 2006 by LXE Inc. , An EMS Technologies Company
125 Technology Parkway, Norcross, GA 30092, U.S.A. (770) 447-4224
LXE® is a registered trademark of LXE Inc. All other brand or product names are trademarks or registered trademarks of their
respective companies or organizations. When manual is in PDF format: "Acrobat ® Reader® Copyright © 1987-2006 Adobe
Systems Incorporated. All rights reserved. Adobe, the Adobe logo, Acrobat, and the Acrobat logo are trademarks of Adobe
Systems Incorporated." applies.
FCC Information:
This device complies with FCC Rules, part 15. Operation is subject to the following conditions:
1. This device may not cause harmful interference
and
2. This device must accept any interference that may be received, including interference that may cause undesired
operation.
Warning!
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to
part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communications. Operation of this equipment in a residential
area is likely to cause harmful interference in which case the user will be required to correct the interference
at his own expense.
Changes or modifications to this device not expressly approved by LXE Inc., could void the user’s authority to operate this
equipment.
EMC Directive Requirements:
This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may be
required to take adequate measures.
Industry Canada:
This Class A digital apparatus meets all requirements of the Canadian Interference Causing Equipment Regulations. Operation is
subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
Cet appareil numérique de la classe A respecte toutes les exigences du Règlement sur le matériel brouiller du Canada.
Le present appareil numérique n’emet pas de bruits radioélectriques dépassant les limites applicables aux appareils numeriques
de le Classe A préscrites dans le Reglement sur le brouillage radioélectrique édits par le ministere des Communications du
Canada.
IMPORTANT SAFETY WARNINGS US
SAVE THESE INSTRUCTIONS
This document contains important safety and operating instructions for the LXE MX5 Multi-Charger. Please read
all instructions and cautionary markings on the charger/analyzer itself before putting the unit into service.
Safety Alert Symbols
This symbol is used to call your attention to instructions concerning your personal safety. Watch
for this symbol – it will alert you to important safety precautions that must be observed to avoid
death, personal injury or property damage. Follow the instructions after the warning symbol and be
alert to the possibility of personal injury or death.
These signal words provide users with information about the seriousness of the hazard involved:
DANGER WARNING CAUTION
Indicates imminent hazards
which, if not avoided, WILL
result in severe personal injury
or death.
Indicates potential hazards
which, if not avoided, COULD
result in severe personal injury
or death.
Indicates hazards or unsafe practices
which, if not avoided, COULD result in
minor or moderate personal injury or
property damage.
Safety Instructions
Setting up the MX5 Multi-Charger
Locate or orient the AC cord so that it will not be stepped on, tripped over or subjected to damage or stress.
Analyze or charge only LXE part no. MX5A379BATT Rechargeable Lithium Ion Battery Pack in this
charger/analyzer. Other batteries or battery packs may burst causing injury or property damage.
Operating the MX5 Multi-Charger
Only users who have read and understand all operating instructions are qualified to operate the MX5 Multi-Charger.
Failure to read, understand and follow safety instructions may result in injury or death.
Keep the rear of the charger/analyzer free of obstacles and do not block the rear ventilation slots. The
charger/analyzer generates internal heat during charging.
Keep the charger/analyzer away from any heat source. Excessive internal heating can ruin the charger/analyzer.
Use care when inserting battery. Do not "slam" or slide the battery into the pocket, this could damage the
charger/analyzer.
Keep dirt and foreign objects out of the battery pocket. Do not short circuit any of the contacts in the battery
pocket, this could result in injury or property damage.
Do not operate the charger/analyzer if it has been dropped or damaged in any way. Return the charger/analyzer to
LXE.
Storing the MX5 Multi-Charger
Disconnect charger/analyzer by pulling the plug; not the cord.
Maintaining the MX5 Multi-Charger
Service should be performed by trained persons only. Return the charger/analyzer to LXE.
Caring for Batteries
Do not dispose of batteries into a fire. Burning will generate hazardous vapors and may cause the battery to
explode. Failure to observe this warning may result in injury from inhalation of vapors or burns from flying debris.
Do not immerse batteries in water or any other liquid. If batteries are immersed, contact LXE.
Do not disassemble or perform modifications to the battery. There are no user serviceable components in the
battery.
Do not place battery into pocket or toolbox with conductive objects (coins, keys, tools, etc.).
A battery placed on damp ground or grass could be electrically shorted. Lay the battery on its side when not in use.
Do not store batteries above 140°F (60°C) for extended periods.
Failure to observe these warnings could result in injury or damage to the battery from rapid discharge of energy or
overheating of the battery.
Electrical Shock Hazards
The following precautions should be observed to avoid the risk of electrical shock hazards associated with charging
batteries:
The MX5 Multi-Charger has been designed for indoor use only. Do not operate outdoors or in extremely high
humidity environments. Do not expose charger/analyzer to rain, snow or wet conditions.
Unplug the charger/analyzer from power source before cleaning. Use only mild detergent with a slightly damp
cloth to clean the outside of the charger/analyzer. Do not use solvents or flammable cleaners. Allow the case to dry
fully before using again.
Use of attachments or accessories not recommended by LXE could result in fire, electric shock or injury.
This appliance must be properly grounded. If it should malfunction or break down, grounding provides a path of
least resistance for electric current to reduce the risk of electric shock. This appliance is equipped with a cord
having an equipment grounding conductor and ground outlet that is properly installed and grounded in accordance
with all local codes and ordinances. Do not operate the charger/analyzer with a damaged AC cord or plug. LXE
does not recommend the use of any extension cord with the MX5 Multi-Charger.
The MX5 Multi-Charger has been designed for use on a nominal 100 or 120 volt or nominal 220 or 240 volt circuit
and has a grounding attachment plug. The plug is an IEC configuration that is appropriate for your country and
regulations. Make sure that the appliance is connected to an outlet having a configuration similar to the plug. No
adapter should be used with this appliance. Improper connection of the equipment-grounding conductor can result
in a risk of electric shock.
Check with a qualified electrician or service person if you are in doubt as to whether the outlet is properly
grounded. Do not modify the plug provided with the appliance. If it will not fit in the outlet, have a proper outlet
installed by a qualified electrician.
Do not disassemble the MX5 Multi-Charger. It contains no user serviceable parts.
E-EQ-MX5CHGROG-D MX5 Multi-Charger User’s Guide
Table of Contents
INTRODUCTION 1
Purpose of this Manual ............................................................................................ 1
Quick Start................................................................................................................. 1
Intended Use ............................................................................................................. 1
Controls and Connectors......................................................................................... 2
MX5 Multi-Charger..................................................................................................................2
MX5 Rechargeable Lithium Ion Battery Pack .........................................................................
2
Specifications............................................................................................................
3
Electrical Specifications ...........................................................................................................
3
Operating Temperature Ranges................................................................................................
3
Dimensions ...............................................................................................................................3
INSTALLATION AND OPERATION 4
Introduction............................................................................................................... 4
Setup.......................................................................................................................... 4
Placing the Battery Pack into the Charger.............................................................. 5
Interpreting the LEDs ............................................................................................... 6
Normal Operations.................................................................................................... 6
Maintenance .............................................................................................................. 7
Storage ......................................................................................................................................7
Service ......................................................................................................................................
7
Getting Help............................................................................................................... 7
Accessories ...............................................................................................................................
7
Troubleshooting........................................................................................................ 8
Revision Notices .......................................................................................................
9
I
MPORTANT SAFETY WARNINGS - TRANSLATIONS 10
ii Table of Contents
MX5 Multi-Charger User’s Guide E-EQ-MX5CHGROG-D
Illustrations
Figure 1 MX5 Multi-Charger.............................................................................................................................2
Figure 2 Lithium Ion Battery Pack ....................................................................................................................2
Figure 3 Charging Pocket ..................................................................................................................................4
Figure 4 Battery Pack Insertion .........................................................................................................................5
E-EQ-MX5CHGROG-D MX5 Multi-Charger User’s Guide
Introduction
Purpose of this Manual
This user’s guide is intended to familiarize the user with the safety and operating instructions
necessary to use the MX5 Multi-Charger (Model MX5A385CHGR6US / MX5A385CHGR6WW)
to charge LXE Rechargeable Lithium Ion Battery Packs.
This manual should be readily available to all users and maintenance personnel using this charger.
Quick Start
This manual provides the following instructions for operating the MX5 Multi-Charger.
Setting Up the Charger
Inserting the Battery Pack
Interpreting the LEDs
Intended Use
The LXE MX5 Multi-Charger (MX5A385CHGR6US / MX5A385CHGR6WW) is designed to
simultaneously charge six LXE Rechargeable Lithium Ion Battery Packs in less than four hours,
depending upon battery pack temperature and conditions
.
Note: Store the charger in a cool, dry place.
Important: This symbol is placed on the product to remind users to dispose of Waste Electrical
and Electronic Equipment (WEEE) appropriately, per Directive 2002-96-EC. In most areas, this
product can be recycled, reclaimed and re-used when properly discarded. Do not discard labeled
units with trash. For information about proper disposal, contact LXE through your local sales
representative, or visit www lxe com.
2 Controls and Connectors
MX5 Multi-Charger User’s Guide E-EQ-MX5CHGROG-D
Controls and Connectors
MX5 Multi-Charger
Figure 1 MX5 Multi-Charger
1 Front 4 Back
2 Battery Charging Pocket 5 Power Connection
3 LED Indicators 6 Ventilation Slots
MX5 Rechargeable Lithium Ion Battery Pack
Battery Pack Model Number -- MX5A379BATT
Figure 2 Lithium Ion Battery Pack
1. Retaining Screws
2. Contacts, Battery Charger
3. Retaining Clip
Specifications 3
E-EQ-MX5CHGROG-D MX5 Multi-Charger User’s Guide
Specifications
Electrical Specifications
Parameter Min Typical. Max. Comment
Power Supply Input
Voltage (V
AC-IN
)
88VAC 110VAC 132VAC Auto-switching
Power Supply Input
Voltage(V
AC-IN
)
176VAC 220VAC 264VAC Auto-switching
Power Supply Input
Frequency (freq)
47Hz 63Hz
Operating Temperature Ranges
Minimum Maximum Comment
Operating 0°C (32°F) +60°C (140°F) Battery packs will only be charged when their temperature
is between 0°C (32°F) and 45°C (113°F).
Charging 0°C (32°F) +45°C (113°F) Battery packs will not charge if their temperature is outside
this range.
1
Storage -20°C (-4°F) +70°C (158°F) Unit is off.
Dimensions
Weight 11.6 pounds
Plug Type IEC; 3-prong
1
If the MX5 has a dead main battery and is as cold as the extended operating temperature’s
lowest value, the unit must be warmed to above –20°C (-4°F) before installing a new main
battery pack and pressing the On button.
4 Introduction
MX5 Multi-Charger User’s Guide E-EQ-MX5CHGROG-D
Installation and Operation
Introduction
The life and capacity of a Lithium Ion battery can vary significantly depending on the discharge
current and the environment in which it is used. As with all batteries, expect to see a reduction in
the total number of operations a fully charged battery pack can deliver as it ages. Charging times
may increase but will not exceed four hours. Battery packs do not need to be fully discharged
between charge cycles.
Setup
Ensure that the location you choose for the battery charger is well ventilated.
Place the charger on a horizontal, hard surface.
Plug the power cord into a properly grounded outlet.
On initial power-up, all LEDs light up for a few seconds (yellow, red, green).
Figure 3 Charging Pocket
1. Battery Charging Pocket
2. Retaining Pins
3. Battery Charger Contacts
Placing the Battery Pack into the Charger 5
E-EQ-MX5CHGROG-D MX5 Multi-Charger User’s Guide
Placing the Battery Pack into the Charger
Caution!
It’s important that battery packs are inserted into the charging pocket correctly.
Inserting the battery incorrectly could result in damage to the battery pack or the
charger.
1. Insert the narrow end of the battery pack into the charging pocket and push down firmly.
2. The LEDs for the charging pocket briefly illuminate yellow, red, green then the yellow LED
is the only LED that remains illuminated as the charging process begins.
Figure 4 Battery Pack Insertion
Caution!
Do not "slam" or drop the battery pack into the charger. Damage may result.
6 Interpreting the LEDs
MX5 Multi-Charger User’s Guide E-EQ-MX5CHGROG-D
Interpreting the LEDs
The status of the charge operation is communicated by the LED located at the base of each
charging pocket.
Function Indication Description
No Battery/power Off Battery pack not plugged in or no power applied.
Charged Green Battery pack fully charged.
Charging Yellow Battery pack charging.
Temp Standby Flashing Yellow Battery pack temperature out of range.
No Battery COMMS Solid Red on any
station
No or incorrect battery communication
Battery Temp and
Timeout Fault
Flashing Red on any
station
Battery pack fault or failure OR Timeout period expired.
Charger Failure Flashing Red on all
stations.
Charger failure.
See Also: “Troubleshooting”.
Normal Operations
The optimal operating temperature range for the MX5 Multi-Charger is between 32°F and 140°F
(0°C and 60°C). While charging, the charger and battery pack will generate enough heat to feel
warm. This is normal and does not indicate a problem. Do not store the battery pack in direct
sunlight or anywhere the battery pack cannot cool down. If the battery pack is hot after removal
from the computer, allow it to cool at room temperature before placing it in the charger.
Charge times may increase significantly if the battery is warm or hot, since it takes the battery
pack longer to cool down while in the charger pocket. If the battery pack is hot from severe
environmental use and immediate recharging is necessary, place the battery pack in a cool air
stream or in a cool location until it is no longer warm to the touch before charging.
Do not place or store the MX5 Multi-Charger in hazardous locations.
Maintenance 7
E-EQ-MX5CHGROG-D MX5 Multi-Charger User’s Guide
Maintenance
Use a clean soft cloth to wipe any dirt, moisture or grease from the battery pack, contacts or the
charger. Do not use any liquid to clean the battery pack or charger contacts.
Storage
Battery packs should be kept in a cool, dry place whenever possible. Do not store battery packs in
direct sunlight, on a metal surface, or anywhere the battery pack cannot cool down. Do not leave
the battery pack in a non-operating charger. The battery pack may discharge through the charger
rather than hold its charge.
Service
There are no user serviceable parts in the Rechargeable Lithium Ion Battery Pack or the MX5
Multi-Charger. Should your charger require service, contact LXE.
Getting Help
All LXE manuals are now available on one CD and they can also be viewed/downloaded from the
LXE ServicePass website. Contact your LXE representative to obtain the LXE Manuals CD. You
can also check the LXE ServicePass website for the latest releases of LXE manuals.
You can also get help from LXE by calling the telephone numbers listed on the LXE Manuals
CD, in the file titled "Contacting LXE". This information is also available on the LXE ServicePass
website.
Explanations of terms and acronyms used in this manual are located in the file titled "LXE
Technical Glossary" on the LXE Manuals CD and on the LXE ServicePass website.
Accessories
Note: Items with a Green letter R in the first column are ROHS-compliant. Please contact your LXE
representative when ordering ROHS-compliant items as the part number may have changed. Items without
the letter R may have received ROHS-compliance after this guide was published.
Battery Chargers and Battery
6 Unit Charger with US Power Cable
MX5A385CHGR6US
R
6 Unit Charger without US Power Cable
MX5A385CHGR6WW
R
Tool, Battery Removal 5 Pack, MX5
9000A508BATTERYTOOL
R
Battery, Li-Ion
MX5A379BATT
8 Troubleshooting
MX5 Multi-Charger User’s Guide E-EQ-MX5CHGROG-D
Troubleshooting
The following is intended as an aid in determining whether the battery pack or the charger may be malfunctioning.
Problem Cause Solution
Battery pack does not fit in
charger pocket.
Different manufacturer's battery
pack, or there is an object in the
charger pocket.
Check if the battery pack is LXE part
number MX5A379BATT. If not, do not
use. Remove the object from the charger
pocket.
No battery pack in charger, but
any of the LEDs are on.
Dirt or foreign objects are in the
charger pocket.
Unplug charger from outlet. Remove any
dirt or foreign objects from charger
pocket. If the LEDs continue to remain
ON, the charger may be defective. Return
charger to an authorized LXE service
center.
Charger is plugged into a live
outlet, battery pack is inserted,
but RED LED is OFF and no
other LEDs are on, or all LEDs
are off.
1) Battery pack is not making
contact with terminals in the
charger pocket.
2) Faulty battery pack.
3) New battery pack, same
result.
1) Push battery pack in firmly. Do not
"slam" the battery pack into the
battery pocket.
2) Replace battery pack.
3) Contact LXE for replacement
options.
When you first put a fully
charged battery pack in the
charger, the YELLOW LED
comes on, indicating the battery
pack is charging.
There is nothing wrong with the
battery pack or charger. During
the first few minutes, the
charger checks the battery pack
for correct voltage and charge
state. During this time the
YELLOW LED is continuously
ON. After charging is complete,
the GREEN LED comes ON.
Do not "top off" a fully charged battery
pack by repeatedly placing it in charger.
The battery pack may overheat and be
damaged!
Current could not be sourced
through the battery pack due to
age, exhaustion or damage to
the cell(s). The battery pack
does not communicate with the
charger.
OR
Contact LXE for battery pack
replacement options.
The battery pack voltage has not
reached 8.2VDC within 90
minutes and the charger has
timed out.
OR
Contact LXE for battery pack
replacement options.
Red LED at any station is
flashing
The charger’s 4-hour or 6-hour
timeout period has expired.
Make sure that the battery pack
temperature is within specification and
retry charging. If problem repeats,
contact LXE for battery pack
replacement options.
Revision Notices 9
E-EQ-MX5CHGROG-D MX5 Multi-Charger User’s Guide
Problem Cause Solution
Flashing YELLOW LED when
battery pack is inserted in the
charger.
The battery pack is too hot or
too cold to charge.
Remove battery pack from the charger
and allow it to adjust to room
temperature.
NOTE: If the battery pack is left in the
charger, it will cool down or warm to a
temperature upon which the charger will
begin the charge cycle. However,
depending on the temperature of the
battery, it may take 2-3 hours to adjust.
The cool-down of a battery pack is much
quicker if the battery is not in the charger
pocket.
Solid RED LED at any station
upon battery pack insertion.
If upon insertion, indicates that
the battery pack is the wrong
type chemistry, i.e. not lithium
ion.
Replace battery pack with correct type.
Solid RED LED at any station
after charging is complete.
If after end of rapid charge
period, indicates an error in the
battery pack’s internal flash
memory.
Return the battery pack for service –
noting the failure mode.
Solid RED LED at any station
after INITIAL charging is
complete.
New Battery Initial Charge
Completed -- Remove and
reinsert the battery. If the LED
remains red after 15-20 minutes,
this indicates the battery is
“bad”.
Return the battery pack for service or
analysis – noting the failure mode.
Revision Notices
Revision A May 2003
Revision B March 2005
Changed word “operator” to “user”. Updated LXE logo on front page, added statement about not
placing/storing the Multi-Charger in hazardous locations.
Revision C October 2005
Added WEEE statement to “Introduction”.
Revision D November 2006
Updated equipment graphics to show new LXE logo, added Troubleshooting segment directed toward new
batteries. Added Accessories with ROHS classifications. Added Revision Notices.
10 Revision Notices
MX5 Multi-Charger User’s Guide E-EQ-MX5CHGROG-D
Important Safety Warnings - Translations
CN Chinese
DA Danish
DE German
ES Spanish
FI Finnish
FR French
GK Greek
IT Italian
JP Japanese
KR Korean
NL Dutch
NO Norwegian
PT Portuguese
SE Swedish
TR Turkish
Important Safety Warnings - CN T-1
E-EQ-MX5CHGROG-D MX5 Multi-Charger User’s Guide
CN
MX5A379BATT
MX5A379BATT
T-2 Important Safety Warnings - CN
MX5 Multi-Charger User’s Guide E-EQ-MX5CHGROG-D
Important Safety Warnings - DA T-3
E-EQ-MX5CHGROG-D MX5 Multi-Charger User’s Guide
DA
VIGTIGE ADVARSLER OM SIKKERHED
GEM DISSE INSTRUKTIONER
Dette dokument indeholder vigtige sikkerheds- og driftsinstruktioner til multi-opladeren, ved anvendelse af LXE
MX5A379BATT litium ion batterisæt. Læs venligst alle instruktioner og advarende anvisninger på selve opladeren, før De tager
enheden i brug.
Symboler for sikkerhedsadvarsel
Dette symbol anvendes til at gøre Dem opmærksom på instruktioner angående Deres personlige sikkerhed. Vær
opmærksom på dette symbol – det vil advare Dem om vigtige sikkerhedsforanstaltninger, der skal overholdes
for at undgå dødsfald, kropsskader eller ejendomsskader. Følg instruktionerne, der følger advarselssymbolerne
og vær opmærksom på muligheden for kropsskader eller dødsfald.
Disse signalord informerer brugerne de involverede farers alvorlighed:
FARE ADVARSEL PAS
Angiver truende farer, der, om
ikke undgået, VIL resultere i
alvorlige personlige skader eller
dødsfald.
Angiver mulige farer, der, om ikke
undgået, KAN resultere i alvorlige
personlige skader eller dødsfald.
Angiver farer eller usikre anvendelser, der, om
ikke undgået, KAN resultere i mindre eller lettere
personlige skader eller ejendomsskader.
Sikkerhedsinstruktioner
Opstilling af multi-opladeren
Pas på:
Visse LXE produkter indeholder et litium ion batteri. Der er fare for eksplosion, hvis batteriet ikke udskiftes
korrekt. Udskift kun med den samme eller lignende type, der er anbefalet af fabrikanten. Skil Dem af med
batterierne i overensstemmelse med fabrikantens instruktioner.
Placér eller anbring AC ledningen, så den ikke trædes på, faldes over eller udsættes for skader eller belastning. Oplad kun LXE
del nr. MX5A379BATT genopladeligt litium ion batterisæt i denne oplader. Andre batterier eller batterisæt kan revne og
forårsage ulykker eller ejendomsskader.
Anvendelse af multi-opladeren
Kun brugere, der har læst og forstået alle driftsinstruktioner er egnede til at anvende multi-opladeren. Har man ikke læst, forstået
og fulgt sikkerhedsinstruktionerne kan det resultere i ulykker eller dødsfald.
Hold bagsiden af opladeren fri for forhindringer og blokér ikke ventilationshullerne på bagsiden. Opladeren danner indvendig
varme under opladning.
Hold opladeren bort fra enhver varmekilde. Kraftig indvendig varme kan ødelægge opladeren.
Vær forsigtig ved indsættelse af batteriet. ”Smæk” ikke batteriet ind i lommen, da dette kan beskadige opladeren.
Hold snavs og fremmede objekter ude af batteriets lomme. Kortslut ikke nogle af kontakterne i batteriets lomme, da dette kan
resultere i ulykker eller ejendomsskader.
Anvend ikke opladeren, hvis denne har været tabt på gulvet eller er beskadiget på nogen måde. Bring opladeren tilbage til LXE.
Oplagring af multi-opladeren
Afbryd opladeren ved at trække i stikket; ikke i ledning.
Vedligeholdelse af multi-opladeren
Vedligeholdelse bør kun udføres af uddannede personer. Bring opladeren tilbage til LXE.
Håndtering af batterier
Kast ikke batterier i ild. Brand vil danne farlige dampe og kan få batteriet til at eksplodere. Er man ikke opmærksom på denne
advarsel, kan det resultere i skader ved indånding af dampe eller brandskader fra flyvende rester.
Dyp ikke batterier i vand eller enhver anden væske. Hvis batterierne har været udsat for vand eller anden væske, kontakt da
LXE.
De må ikke demontere eller udføre ændringer af batteriet. Der findes ingen anvendelige komponenter i batteriet.
Put ikke batteriet i lommen eller værktøjskasse, sammen med ledende objekter (mønter, nøgler, værktøj, osv.).
Et batteri, der bliver anbragt på fugtig grund eller græs, kan være kortsluttet. Anbring batteriet på siden, når det ikke anvendes.
Opbevar ikke batteriet ved over 60°C i længere tid.
Er man ikke opmærksom på disse advarsler, kan det resultere i ulykker eller skader på batteriet, ved for hurtig energiafladning
eller overophedning af batteriet.
Farer for elektrisk stød
De følgende foranstaltninger skal overholdes, for at undgå risiko for elektrisk stød, forbundet med opladning af batterier:
Multi-opladeren er kun egnet til indendørs brug. Anvend ikke batteriet udendørs eller i særligt fugtige miljøer. Udsæt ikke
opladeren for regn, sne eller våde forhold.
T-4 Important Safety Warnings - DA
MX5 Multi-Charger User’s Guide E-EQ-MX5CHGROG-D
Afbryd strømforbindelse til opladeren før rensning. Anvend kun milde rensemidler, med en let fugtig klud, til rensning af
ydersiden af opladeren. Anvend ikke opløsningsmidler eller brandbare rensemidler. Vent til opladeren at tørre helt, før De tager
den i brug igen.
Anvendelse af anordninger eller tilbehør, der ikke er anbefalet af LXE, kan resultere i brand, elektrisk stød eller skader.
Dette apparat skal have korrekt jordforbindelse. Hvis det skulle have en funktionsfejl eller bryde sammen, giver jordforbindelsen
en vej af mindre modstand for elektrisk strøm, til at reducere risikoen for elektrisk stød. Dette apparat er udstyret med en ledning,
der har en jordforbundet leder og jordudløb, der er installeret korrekt og jordforbundet i overensstemmelse med alle lokale regler
og bestemmelser. Anvend ikke opladeren med en beskadiget AC ledning eller stik. LXE anbefaler ikke anvendelsen af en
forlængerledning med multi-opladeren.
Multi-opladeren er egnet til brug på et nominalt 100 til 120 volt eller et nominalt 220 til 240 volt kredsløb og har et tilhørende
stik til jordforbindelse. Stikket er en IEC konfiguration, der er tilpasset Deres land og regulativer. Sørg for, at apparatet er
tilsluttet en stikkontakt, der har den samme konfiguration som stikket. Man bør ikke anvende en adapter med dette apparat.
Ukorrekt tilslutning af lederen til jordforbindelse, kan resultere i risiko for elektrisk stød.
Rådspørg en kvalificeret elektriker eller serviceperson, hvis De er i tvivl om udløbet er korrekt jordforbundet. Tilpas ikke
ledningen, der følger med apparatet. Hvis det ikke passer til stikkontakten, skal De få en passende stikkontakt installeret af en
kvalificeret elektriker.
De må ikke demontere batteriet. Der findes ingen anvendelige komponenter i batteriet.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48

LXE MX5A3856 Användarmanual

Typ
Användarmanual
Denna manual är också lämplig för