STIHL RMA 235.0 Användarmanual

STIHL RMA 235

Instruction manual

Manual de instrucciones

Manual de utilização

Bruksanvisning

Käyttöopas

Betjeningsvejledning

Οδηγίες χρήσης

Инструкция за експлоатация

Посібник з експлуатації

EN

ES

PT

NO

SV

FI

DA

EL

BG

UK

RMA 235.0

B

1

0478 131 9841 B

1 2

0478 131 9841 B

2

3 4

5

3

0478 131 9841 B

6

7 8

9 10

0478 131 9841 B

4

11 12

13

5

0478 131 9841 B

14 15

16 17

18 19

0478 131 9841 B

6

20 21

22

7

0478 131 9841 B

23

0478 131 9841 B

8

ENES

9

PTNOSVFIDAELBGUK

0478 131 9841 B - EN

Dear Customer,

Thank you for choosing STIHL. We

develop and manufacture our quality

products to meet our customers'

requirements. The products are designed

for reliability even under extreme

conditions.

STIHL also stands for premium service

quality. Our specialist dealers guarantee

competent advice and instruction as well

as comprehensive service support.

We thank you for your confidence in us

and hope you will enjoy working with your

STIHL product.

Dr. Nikolas Stihl

IMPORTANT: READ BEFORE USE AND

KEEP IN A SAFE PLACE.

Printed on chlorine-free bleached paper. Paper is recyclable. Cover is halogen free.

1. Table of contents

Notes on the instruction manual 10

General 10

Instructions for reading the

instruction manual 10

Country-specific versions 10

Machine overview 11

For your safety 11

General 11

Clothing and equipment 12

Battery 12

Charger 13

Charging 13

Transporting the machine 14

Transporting the battery 14

Before operation 14

Working with your machine 15

Maintenance, cleaning, repairs and

storage 16

Storage for prolonged periods

without operation 17

Disposal 17

Description of symbols 18

Preparing the machine for

operation 18

Assembling lawn mower 18

Battery and charger 18

General 18

Removing/inserting the battery 18

Connecting charger to the mains 18

Recharging the battery 18

LEDs on the battery 19

LED on the charger 19

Controls 19

Safety plug 19

Grass catcher box 19

Level indicator 20

Handlebar 20

Central cutting height adjustment 20

Notes on working with the

machine 20

General 20

Cutting performance 21

Working area for operator 21

Correct motor load 21

If the mowing blade blocks 21

Thermal motor overload protection 21

Safety devices 21

Safety plug 21

Safety devices 21

Two-hand operation 21

Run-down brake 21

Operating the machine 22

Preparatory measures 22

Switching on lawn mower 22

Switching off lawn mower 22

Emptying the grass catcher box 22

Maintenance 22

General 22

Cleaning the machine 22

Electric motor and wheels 23

Battery 23

Charger 23

Checking blade wear 23

Removing and installing mowing

blade 23

Sharpening the mowing blade 24

Storage (winter break) 24

Transport 24

Transporting the lawn mower 24

Transporting the battery 25

0478 131 9841 B - EN

10

2.1 General

This instruction manual constitutes

original manufacturer’s instructions in

the sense of EC Directive 2006/42/EC.

STIHL is continually striving to further

develop its range of products; we therefore

reserve the right to make alterations to the

form, technical specifications and

equipment level of our standard

equipment.

For this reason, the information and

illustrations in this manual are subject to

alterations.

This instruction manual may describe

models that are not available in all

countries.

This instruction manual is protected by

the right of reproduction, translation and

processing using electronic systems.

2.2 Instructions for reading the

instruction manual

Illustrations and texts describe specific

operating steps.

All symbols which are affixed to the

machine are explained in this instruction

manual.

Viewing direction:

Viewing direction when "left" and "right"

are used in the instruction manual:

the user is standing behind the machine

and is looking forwards in the direction of

travel.

Section reference:

References to relevant sections and

subsections for further descriptions are

made using arrows. The following example

shows a reference to a section: (Ö 6.1)

Designation of text passages:

The instructions described can be

identified as in the following examples.

Operating steps which require intervention

on the part of the user:

● Release bolt (1) using a screwdriver,

operate lever (2)...

General lists:

– Use of the product for sporting or

competitive events

Texts with added significance:

Text passages with added significance are

identified using the symbols described

below in order to especially emphasise

them in the instruction manual:

Texts relating to illustrations:

Illustrations relating to use of the machine

can be found in the front of this instruction

manual.

The camera symbol serves to link

the figures on the illustration pages

with the corresponding text

passages in the instruction manual.

2.3 Country-specific versions

STIHL supplies chargers with different

plugs and switches, depending on the

country of sale.

Minimising wear and preventing

damage 25

Environmental protection 26

Standard spare parts 26

EU - Declaration of conformity 26

Lawn mower, manually operated

and battery-powered (STIHL RMA) 26

STIHL charger AL 101 27

Technical specifications 27

Lawn mower STIHL RMA 235.0 27

STIHL AK battery 27

STIHL charger AL 101 27

REACH 27

Troubleshooting 28

Service schedule 29

Handover confirmation 29

Service confirmation 29

2. Notes on the instruction

manual

Danger

Risk of accident and severe injury

to persons. A certain type of

behaviour is necessary or must be

avoided.

Warning

Risk of injury to persons. A certain

type of behaviour prevents possible

or probable injuries.

Caution

Minor injuries or material damage

can be prevented by a certain type

of behaviour.

Note

Information for better use of the

machine and in order to avoid

possible operating errors.

1

ENES

11

PTNOSVFIDAELBGUK

0478 131 9841 B - EN

Chargers with European plugs are shown

in the illustrations. Chargers with other

types of plug are connected to the mains in

a similar way.

4.1 General

These safety regulations must

be observed when working with

the machine.

Read the entire instruction

manual before using the

machine for the first time. Keep

the instruction manual in a safe

place for future reference.

These safety precautions are essential for

your safety, however the list is not

exhaustive. Always use the machine in a

reasonable and responsible manner and

be aware that the user is responsible for

accidents involving third parties or their

property.

Only give or lend the machine, including

any accessories, to persons who are

familiar with this model and how to operate

it. The instruction manual forms part of the

machine and must always be provided to

persons borrowing it.

Make sure that you are familiar with the

controls and use of the machine.

The machine must only be used by

persons who have read the instruction

manual and are familiar with operation of

the machine. The user should seek expert

and practical instruction prior to initial

operation. The user must receive

instruction on safe use of the machine

from the vendor or another expert.

During this instruction, the user should be

made aware that the utmost care and

concentration are required for working with

the machine.

Residual risks persist even if you operate

this machine according to the instructions.

Make sure that the user is physically,

sensorily and mentally capable of

operating the machine and working with it.

If the user is physically, sensorily or

mentally impaired, the machine must only

be used under supervision or following

instruction by a responsible person.

Make sure that the user is of legal age or

being trained under supervision in a

profession in accordance with national

regulations.

The machine must only be operated by

persons who are well rested and in good

physical and mental condition. If your

health is impaired, you should consult your

doctor to determine whether working with

the machine is possible. The machine

should not be operated after the

consumption of alcohol, drugs or

medications which impair reactions.

The machine is intended for private use.

Caution – risk of accident:

The machine is only intended for mowing

lawns. Its use for other purposes is not

permitted and may be dangerous or result

in damage to the machine.

Due to the physical danger to the user, the

machine must not be used for the following

applications (incomplete list):

– for trimming bushes, hedges and

shrubs,

3. Machine overview

1 Upper handlebar

2 Motorstop lever

3 Rotary handle

4 Discharge flap

5 Lower handlebar

6 Transport handle

7 Motor hood

8 Battery compartment cover

9 Safety plug

10 Locking lever

11 Front wheel

12 Housing

13 Rear wheel

14 Rating plate with machine number

15 Grass catcher box

16 Cable guide

17 Cable clip

18 ON button

19 Height adjustment lever

20 Level indicator

21 Battery

22 Charger

1

4. For your safety

Risk of death from suffocation!

Packaging material is not a toy -

danger of suffocation! Keep

packaging material away from

children.

0478 131 9841 B - EN

12

– for cutting creepers,

– for the care of lawn roofs and balcony

boxes,

– for shredding or chopping tree or hedge

cuttings,

– for clearing paths (vacuuming,

blowing),

– for levelling earth mounds, e.g. mole

hills,

– for transporting clippings, except in the

grass catcher box intended for this

purpose.

For safety reasons, any modification to the

machine, except the proper installation of

accessories approved by STIHL, is

forbidden and results in voiding of the

warranty cover. Information regarding

approved accessories can be obtained

from your STIHL specialist dealer.

In particular, any tampering with the

machine which increases the power output

or speed of the engine or motor is

forbidden.

It is not permissible to make any

modifications to the machine that could

lead to increased noise emissions.

It is not permitted to transport objects,

animals or persons, particularly children,

on the machine.

Particular care is required during use in

public green spaces, parks, sports fields,

along roads and in agricultural and forestry

businesses.

Caution! Danger to health due

to vibrations. Excessive

exposure to vibrations can

result in damage to the

cardiovascular or nervous system,

particularly in persons with cardiovascular

problems. Please consult a physician if

you experience symptoms that may have

been caused by vibrational loads.

Symptoms of this kind principally affect the

fingers, hands or wrists and include

(incomplete list):

– numbness,

–pain,

– muscular weakness,

– skin discolouration,

– unpleasant tingling sensation.

Hold the handlebar tightly, but not tensed,

with both hands in the designated

locations during operation.

Plan your working times so that more

severe physical strains over a longer

period are avoided.

4.2 Clothing and equipment

Always wear sturdy footwear

with high-grip soles when

working. Never work barefoot

or, for example, in sandals.

Also always wear sturdy gloves

and tie up and secure long hair

(headscarf, cap, etc.) when

performing maintenance and

cleaning work or when transporting the

machine.

Wear suitable safety glasses

when sharpening the mowing

blade.

Always wear long trousers and

tight-fitting clothing when operating the

machine.

Never wear loose clothes which may

become caught on moving parts (control

levers) – do not wear jewellery, ties or

scarves.

4.3 Battery

Children cannot recognise or evaluate the

dangers posed by batteries. There is a risk

of serious injury to children.

● Keep children away.

● Keep the battery out of the reach of

children.

The battery is not protected against all

ambient conditions. If exposed to certain

ambient conditions, the battery may catch

fire or explode. Persons could be injured or

property damaged.

● Protect the battery against

heat or fire.

● Do not throw the battery into a

fire.

● Observe the permissible

temperature range for the

battery. (Ö 18.2)

● Keep the battery away from

metallic objects.

● Protect the battery against

rain and moisture. Do not

immerse in liquids.

● Do not subject the battery to

high pressure.

● Do not subject the battery to

microwaves.

● Protect the battery against chemicals

and salts.

● Do not drop the battery.

● Keep the battery clean and dry.

● Store the battery in a locked, room.

● Store the battery away from the lawn

mower and from the charger.

ENES

13

PTNOSVFIDAELBGUK

0478 131 9841 B - EN

● Keep the battery in electrically non-

conductive packaging.

● Store the battery within the permissible

temperature range. (Ö 18.2)

The battery is in good operating

condition when the following conditions

are met:

– The battery is not damaged.

– The battery is clean and dry.

– The battery is operative and has not

been modified.

The battery can not operate safely if it is

not in good operating condition. There is a

risk of serious injury to persons.

● Do not work with a damaged or

defective battery.

● Do not charge a damaged or defective

battery.

● If the battery is dirty or wet: clean the

battery and allow it to dry.

● Do not modify the battery.

● Do not insert any objects into the

apertures in the battery.

● Never connect the battery terminals

with metallic objects and cause a short

circuit.

● Do not open the battery.

Fluid may escape from a damaged battery.

If the fluid enters into contact with the skin

or eyes, this may cause irritation.

● Avoid contact with the fluid.

● In the event of contact with the skin:

Wash the affected areas with plenty of

soap and water.

● In the event of contact with the eyes:

Rinse the eyes with plenty of water for

15 minutes and seek medical attention.

A damaged or defective battery may emit

a strange odour, smoke, or catch fire.

Persons could be seriously or fatally

injured and property may be damaged.

● If the battery emits a strange odour or

smokes: Do not use the battery and

keep it away from flammable materials.

● If the battery catches fire: extinguish the

battery using a fire extinguisher or

water.

4.4 Charger

Children cannot recognise or evaluate the

dangers posed by the charger or by

electrical current. There is a risk of serious

injury to children.

● Keep children away.

● Keep the charger out of the reach of

children.

The charger is not protected against all

ambient conditions. If exposed to certain

ambient conditions, the charger may catch

fire or explode. Persons could be injured or

property damaged.

● Do not operate the charger in a highly

flammable or explosive environment.

● Do not operate the charger on a highly

flammable surface.

● Observe the permissible temperature

range for the charger.

● Operate the charger in a dry

and locked room.

● Store the charger away from

the lawn mower and from the battery.

● Allow the charger to cool down before

putting it into storage.

● Keep the charger clean and dry.

● Store the charger in a locked, room.

The charger is in good operating

condition when the following conditions

are met:

– The charger is not damaged.

– The charger is clean and dry.

– The charger is operative and has not

been modified.

If not in good operating condition,

components can no longer operate

correctly and safety devices may be dis

abled. There is a risk of serious injury to

persons.

● Do not use a damaged or defective

charger. Dispose of the charger.

● If the charger is dirty or wet: clean the

charger and allow it to dry.

● Do not modify the charger.

● Do not insert any objects into the

apertures in the charger.

● Never connect the charger terminals

with metallic objects and cause a short

circuit.

● Do not open the charger.

The electric cable is not intended for

carrying or suspending the charger. The

electric cable and the charger could

become damaged.

● Pick up and hold the charger by the

housing. A recessed grip is provided on

the housing for easy lifting of the

charger.

● Store the charger on the wall bracket.

4.5 Charging

Contact with live components can result

from the following causes:

0478 131 9841 B - EN

14

– The electric cable is damaged.

– The mains plug is damaged.

– The socket is incorrectly installed.

Contact with live components can result in

an electric shock. The user could be

seriously or fatally injured.

● The mains plug and electric cable are

particularly important when it comes to

electrical safety.

● Insert the mains plug in a correctly

installed socket.

An incorrect mains voltage or an incorrect

mains frequency during charging may lead

to overvoltage in the charger. The charger

could become damaged.

● Ensure that the mains voltage and the

mains frequency of the power supply

correspond to the information contained

in the rating plate on the charger.

A damaged or defective charger may emit

a strange odour or smoke. Persons could

be injured or property damaged.

● Remove mains plug from socket.

In the case of insufficient heat dissipation,

the charger could overheat, causing a fire.

Persons could be seriously or fatally

injured and property may be damaged.

● Do not cover the charger.

● Store the charger on the wall bracket.

If several chargers are connected to a

socket, electrical wires could become

overloaded during charging. The electrical

wires could heat up and cause a fire.

Persons could be seriously or fatally

injured and property may be damaged.

● Only connect one charger to a socket.

● Do not connect a charger to multiple

sockets.

4.6 Transporting the machine

Always wear gloves in order to prevent

injuries due to sharp-edged and hot

components.

Switch off the machine prior to

transport, allow the blade to

come to a standstill and remove the safety

plug.

Only transport the machine once the motor

has cooled down.

Take the weight of the machine into

account and use suitable loading aids

(loading ramps, lifters) if necessary.

Secure the machine and any machine

components being transported (e.g. grass

catcher box) on the load floor using

fastening material of adequate size (belts,

ropes, etc.).

Avoid contact with the mowing blade when

lifting and carrying the machine.

Observe the information in the section

"Transport". It describes how to lift and

lash the machine. (Ö 13.)

When transporting the machine, always

observe regional legislation, especially

regarding load security and the transport

of objects on load floors.

4.7 Transporting the battery

The battery is not protected against all

ambient conditions. If exposed to certain

ambient conditions, the battery may

become damaged and property may be

damaged

● Do not transport a damaged battery.

● Transport the battery in the machine, in

electrically non-conductive packaging

or in an electrically non-conductive

transport container.

During transport outside of the machine,

the battery could tip over or move. Persons

could be injured or property damaged.

● Pack the battery in the packaging or

transport container in such a way that it

cannot move.

● Secure the packaging or transport

container so that the packaging or

transport container cannot move.

Do not leave the battery inside a vehicle

and never expose it to direct sunlight.

Lithium-ion batteries must be treated with

special care during transport. In particular,

it must be ensured that short circuits are

prevented during transport of the batteries.

For this reason, keep the original

cardboard packaging of the battery and

always transport STIHL batteries either in

the undamaged original packaging or in

the lawn mower.

4.8 Before operation

Make sure that only persons who are

familiar with the instruction manual are

permitted to use the machine.

Observe the local regulations regarding

permitted operating times for gardening

power tools with electric motors.

Carefully inspect the complete area on

which the machine is to be used and

remove any stones, sticks, wires, bones

and other foreign objects which could be

thrown up by the machine. Obstacles (e.g.

tree stumps, roots) can be easily

overlooked in long grass.

ENES

15

PTNOSVFIDAELBGUK

0478 131 9841 B - EN

For this reason, mark all foreign objects

(obstacles) which are hidden in the lawn

and cannot be removed before

commencing work with the machine.

All faulty, worn or damaged parts must be

replaced before using the machine.

Replace any illegible or damaged danger

signs and warnings on the machine. Your

STIHL specialist has a supply of

replacement stickers and all the other

spare parts.

The machine must only be used in good

operating condition. Before each use,

check whether:

– The machine is properly assembled.

– The cutting tool and the entire cutting

unit (mowing blade, fastening elements,

mowing deck housing) are in good

condition. In particular check for secure

fastening, damage (notches or cracks)

and wear.

– The safety devices (e.g. discharge flap,

housing, handlebar, motorstop lever)

are in good condition and working

properly.

– The grass catcher box is undamaged

and correctly installed; a damaged

grass catcher box must not be used.

– The run-down brake of the electric

motor is functioning.

Carry out any necessary work or consult a

specialist dealer. STIHL recommends

STIHL specialist dealers.

Never switch the motor on without a

correctly installed blade. Risk of motor

overheating.

Follow the instructions in the "Battery"

(Ö 4.3) and "Charger" (Ö 4.4) sections.

4.9 Working with your machine

Never work when animals or

persons, particularly children,

are in the danger area.

Do not work at ambient temperatures

below +5°C (41°F).

Only work during the day or with good

artificial light.

Do not operate the machine in the rain or

during thunder storms, particularly when

there is a risk of lightning strike.

Caution – risk of injury!

Never put hands or feet on or

underneath rotating parts.

Never touch the rotating blade.

Always keep away from the discharge

opening.

Always observe the safety distance

provided by the handlebar. The handlebar

must always be installed correctly and

must not be modified. Never operate the

machine with the handlebar folded down.

The switch and safety devices installed in

the machine must not be removed or

bypassed. In particular, never secure the

motorstop lever to the handlebar (e.g. by

tying it).

Never attach any objects to the handlebar

(e.g. work clothing).

The risk of accidents is higher if the ground

is damp due to increased danger of

slipping.

Particular caution should be exercised

during working in order to prevent slipping.

If possible, avoid using the machine when

the ground is damp.

Do not leave the machine in the rain.

Always keep the battery compartment

closed during operation.

Switching on the machine:

Exercise care when switching on the

machine and observe the instructions in

the section "Initial operation of the

machine". (Ö 11.)

Keep your feet a safe distance from the

cutting tool.

Place the machine on an even surface

before switching it on.

The machine must not be tilted before it is

switched on or during switching-on.

Do not switch on the motor if the discharge

chute is not covered by the discharge flap

or the grass catcher box.

Avoid switching the machine on repeatedly

within a short period of time; in particular

avoid "playing" with the ON button. Risk of

motor overheating.

Working on slopes:

Always work across and back on slopes,

never up and down.

If the user loses control when mowing up

and down, there is a risk of being run over

by the machine.

Be particularly careful when changing

direction on a slope.

Always ensure good stability on slopes

and avoid mowing on excessively steep

slopes.

For safety reasons, the machine must not

be used on slopes with an inclination of

more than 25° (46.6%). Risk of injury!

0478 131 9841 B - EN

16

A slope inclination of 25° corresponds to a

vertical height increase of 46.6 cm for a

100 cm horizontal distance.

Working:

Caution – risk of injury!

Never put hands or feet on or

underneath rotating parts.

Never touch the rotating blade.

Always keep away from the discharge

opening. Always observe the safety

distance provided by the handlebar.

Do not try to examine the blade

while the machine is operating.

Never open the discharge flap

and/or remove the grass catcher box when

the mowing blade is running. Rotating

blades can cause injury.

Only operate the machine at walking

speed – never run when working with the

machine. Working quickly with the

machine increases the risk of injury due to

stumbling, slipping, etc.

Be particularly careful when turning the

machine around or pulling it towards you.

Risk of stumbling!

Objects hidden in the turf (lawn sprinkler

systems, posts, water valves, foundations,

electrical wires, etc.) must be avoided.

Never run over any such foreign objects.

If the cutting tool or the machine hits an

obstacle or a foreign object, the motor

must be switched off, the safety plug

disconnected and an inspection performed

by a specialist.

Beware of the cutting tool

running on for several seconds

before coming to a standstill.

Switch off the motor,

– if tilting of the machine is necessary

when transporting over surfaces other

than grass,

– when pushing the machine to and from

mowing areas,

– before removing the grass catcher box,

– before adjusting the cutting height.

Switch off the motor, disconnect

the safety plug and ensure that

the cutting tool has come to a complete

standstill

– before removing the battery;

– before leaving the machine unattended;

– before transporting, lifting, or carrying

the machine;

– before remedying blockages, including

those in the discharge chute;

– before you check, clean or carry out

work on the machine (e.g. folding down

or adjusting the handlebar);

– if the cutting tool has hit a foreign object.

The cutting tool needs to be checked for

possible damage. The machine must

not be operated with a damaged or bent

blade shaft or motor shaft. Risk of

injury through defective parts!

– if the machine begins to vibrate

excessively. In this case, the complete

machine, in particular the cutting tool,

must be checked for possible damage

and loose parts. Damaged parts must

be replaced prior to further use, loose

parts must be fastened/tightened.

4.10 Maintenance, cleaning, repairs

and storage

Before performing work on the machine,

before adjusting or cleaning

● Switch off the motor

● Remove the safety plug

● Remove the battery if

necessary

Allow the machine to fully cool down

before storing it in enclosed places,

performing maintenance on it or cleaning

it.

Cleaning:

The complete machine must be cleaned

thoroughly following use. (Ö 12.2)

Remove accumulated clipping deposits

using a stick. Clean the underside of the

mower with water and a brush.

Risk of injury!

Strong vibration is normally an

indication of a fault.

In particular, the machine must not

be operated with a damaged or

bent blade shaft or mowing blade.

If you do not have the appropriate

expertise, have the necessary

repairs carried out by a specialist

dealer (STIHL recommends STIHL

specialist dealers).

ENES

17

PTNOSVFIDAELBGUK

0478 131 9841 B - EN

Never use high-pressure cleaners and do

not clean the machine under running water

(e.g. using a garden hose).

Do not use aggressive cleaning agents.

These can damage plastics and metals,

impairing the safe operation of your STIHL

machine.

In order to prevent overheating and fire

hazards, keep the areas around the air

vents on the top of the machine (between

the motor hood and housing) and the

machine underside (in the discharge

chute) free from dirt (e.g, grass, straw,

moss, leaves or escaping grease).

Maintenance operations:

Only maintenance operations described in

this instruction manual may be carried out.

Have all other work performed by a

specialist dealer.

If you do not have the necessary expertise

or auxiliary equipment, please always

contact a specialist dealer.

STIHL recommends that you have

maintenance operations and repairs

performed exclusively by a STIHL

specialist dealer.

STIHL specialist dealers regularly attend

training courses and are provided with

technical information.

Only use tools, accessories or

attachments approved for this machine by

STIHL or technically identical parts.

Otherwise, there may be a risk of

accidents resulting in personal injury or

damage to the machine. If you have any

questions, please consult a specialist

dealer.

The characteristics of original STIHL tools,

accessories and spare parts are optimally

adapted to the machine and the user's

requirements. Genuine STIHL spare parts

can be recognised by the STIHL spare

parts number, by the STIHL lettering and,

if present, by the STIHL spare parts

symbol. On smaller parts, only the symbol

may be present.

Always keep warning and information

stickers clean and readable. Damaged or

missing stickers must be replaced by new,

original plates from your STIHL specialist

dealer. If a component is replaced with a

new component, ensure that the new

component is provided with the same

stickers.

Regularly check that the mowing blade is

securely fastened and is not damaged or

worn.

Only perform work on the cutting unit when

wearing thick work gloves and exercising

extreme care.

Ensure that all nuts, pins and screws (in

particular the blade fastening screw) are

securely tightened so that the machine is

in a safe operating condition.

Check the complete machine and the

grass catcher box for wear or damage on

a regular basis, particularly before

extended periods when the machine is not

in use (e.g. over winter). For safety

reasons, worn or damaged parts must be

replaced immediately to ensure that the

machine is always in a safe operating

condition.

Components or guards that are removed

for maintenance operations must be

properly reinstalled immediately.

4.11 Storage for prolonged periods

without operation

Store the cooled machine, the battery and

the safety plug separately from each other

in a dry and locked room that is

inaccessible to children.

Ensure that the machine is protected from

unauthorised use (e.g. by children).

Thoroughly clean the machine before

storage (e.g. winter break).

Store the machine in good operational

condition.

4.12 Disposal

Ensure that old machines (lawn mower,

battery, charger, accessories) are properly

disposed of. Render the lawn mower

unusable prior to disposal. In order to

prevent accidents, ensure that you remove

the safety plug and the electric cable from

the switch to the motor.

Risk of injury due to the cutting tool!

Always store an old machine in a safe

place prior to scrapping. Ensure that the

machine and the cutting tool are kept out

of the reach of children.

Batteries must be disposed of separately

from the machine. Ensure that batteries

are discharged prior to disposal (e.g. by

running the motor) and that they are

disposed of safely and in an

environmentally friendly manner.

0478 131 9841 B - EN

18

6.1 Assembling lawn mower

● Carry out assembly work on level, flat

and solid ground.

● Check the scope of delivery

before assembly.

● Fully charge the battery. (Ö 7.4)

● Install the lower handlebars (D) –

observe the specified tightening

torque.

● Position the upper handlebar onto the

lower handlebars at the required height

and hold. (Ö 8.4)

● Install the upper handlebar and

insert the power cable into the

cable guide (J) as shown and

fasten to the handlebar using the

cable clips (K).

● Assemble and attach the grass

catcher box. (Ö 8.2)

7.1 General

The lawn mower can must only be

operated with rechargeable STIHL type

AK lithium-ion batteries.

The batteries supplied are optimally

adapted to the intended purpose,

however, all STIHL AK type batteries can

be used.

7.2 Removing/inserting the

battery

● Disconnect the safety plug

(Ö 8.1) and hold the battery

compartment cover in the

open position.

Removing the battery:

● Push the locking lever (1) towards the

battery and remove the battery (2)

upwards.

Inserting the battery:

● Insert the battery (2) to the stop in the

battery compartment applying slight

pressure – a clicking sound can be

heard.

7.3 Connecting charger to the

mains

● Insert mains plug (1) in

socket (2).

● After connection of the charger to the

power supply, a self-test is performed.

During this process, the LED (3) on the

charger illuminates green for approx.

1 second, then red, and then

extinguishes again (Ö 7.6).

7.4 Recharging the battery

The charging time depends on

various influencing factors such as

e.g. the temperature of the battery and the

ambient temperature. The actual charging

time may differ from the specified charging

time. Please refer to

www.stihl.com/charging-times for

charging times.

5. Description of symbols

Caution!

Read the instruction man-

ual before initial use.

Risk of injury!

Keep other persons out of

the danger area.

Caution –

sharp cutting blades!

The cutting blades run on

after the motor has been

switched off. Remove the

locking device (safety plug)

before performing mainte-

nance work.

Switch on the motor.

6. Preparing the machine for

operation

Risk of injury!

Observe the safety instructions in

the "For your safety" section. (Ö 4.)

7. Battery and charger

2

3

4

5

6

Once the battery has been inserted

in the charger, charging starts

automatically. When the battery is

fully charged, the charger switches

off automatically.

The battery and the charger heat

up during charging.

7

8

Sidan laddas ...

STIHL RMA 235.0 Användarmanual

STIHL RMA 235.0 Användarmanual

på andra språk

Relaterade papper

Andra dokument