Yamaha MOXF6 Bruksanvisning

MOXF6
Yamaha
varumärke
Yamaha
Modell
MOXF6
Typ
Bruksanvisning

Denna manual är också lämplig för

MOXF6/MOXF8 Remote Editor Owner’s Manual 1
MOXF6/MOXF8 Remote Editor
Owner’s Manual
Contents
Special Notices .......................................................................... 1
What is the MOXF6/MOXF8 Remote Editor?............................ 2
Data structure of the MOXF6/MOXF8 Remote Editor .............. 2
Operation flow from starting the application to closing it ..... 3
MOXF6/MOXF8 Remote Editor Windows.................................. 6
Troubleshooting ....................................................................... 13
Special Notices
•
Copying of the commercially available music sequence data and/or digital audio files is strictly prohibited except for your
personal use.
• The software and this owner’s manual are exclusive copyrights of Yamaha Corporation.
• Copying of the software or reproduction of this manual in whole or in part by any means is expressly forbidden without
the written consent of the manufacturer.
• Yamaha makes no representations or warranties with regard to the use of the software and documentation and cannot
be held responsible for the results of the use of this manual and the software.
• The screen displays as illustrated in this Owner’s Manual are for instructional purposes, and may appear somewhat
different from the screens which appear on your computer.
• Windows is the registered trademarks of Microsoft
®
Corporation.
• Apple, Mac and Macintosh are trademarks of Apple Inc., registered in the U.S. and other countries.
• Steinberg and Cubase are the registered trademarks of Steinberg Media Technologies GmbH.
• The company names and product names in this Owner’s Manual are the trademarks or registered trademarks of their
respective companies.
This owner’s manual assumes that you are already familiar with basic Windows/Mac operations. If you are not,
please refer to the owner’s manual which came with your Windows/Mac software before using the MOXF6/MOXF8
Remote Editor.
For information about hardware requirements, the interconnection of devices and the installation of the MOXF6/
MOXF8 Remote Editor software, refer to the separate Installation Manual as well as the Owner’s Manual for the
respective MIDI device.
MOXF6/MOXF8 Remote Editor
Owner’s Manual
What is the MOXF6/MOXF8 Remote Editor?
MOXF6/MOXF8 Remote Editor Owner’s Manual
2
What is the MOXF6/MOXF8 Remote Editor?
MOXF6/MOXF8 Remote Editor is a convenient tool which lets you edit/create Control Templates for the
MOXF6/MOXF8 Music Synthesizer. These Control Templates let you assign the appropriate functions for your
favorite VSTi to the Knobs on the MOXF6/MOXF8. While the MOXF6/MOXF8 handles up to 50 Control
Templates (in a single Bank), the MOXF6/MOXF8 Remote Editor can be used to create and organize multiple
Bank files, each of which contain 50 Control Templates. Data of a single Bank containing 50 Control
Templates created on the MOXF6/MOXF8 Remote Editor can be transferred from the computer to the
MOXF6/MOXF8 and saved to the computer as a single Bank file (.X6R).
Data structure of the MOXF6/MOXF8 Remote Editor
Within the MOXF6/MOXF8 Remote Editor, you can select a Bank file then edit each one of the 50 Control
Template contained in the selected Bank. After finishing your edits of the selected Bank (called “Current
Bank”), save the Bank data to a file by using the “Save” or “Save As…” menu. The Bank data saved to the file
can be recalled when starting the MOXF6/MOXF8 Remote Editor next time.
Refer to the illustration below to understand the data structure of the MOXF6/MOXF8 Remote Editor.
File
(extension: .X6R)
50 Control Templates
Open
(1 Bank)
50 Control Templates in a file
are called up the Library
window.
Edit window
Library window
MOXF6/MOXF8 Instrument
Data of the 50 Control Templates (1 Bank) is
automatically transferred as soon as the
MOXF6/MOXF8 Remote Editor is started.*
When a File is opened, data of the 50 Control
Templates (1 Bank) in the file is automatically
transferred to the MOXF6/MOXF8 Instrument.*
After a Control Template is imported from the file,
click the [OK] button to transfer the current Bank
to the MOXF6/MOXF8 Instrument.*
* This is available only when the MOXF6/MOXF8 and
the MOXF6/MOXF8 Remote Editor (computer) are
connected properly via USB, and are in the ONLINE
status.
When you properly connect the computer and
MOXF6/MOXF8 by USB while using the MOXF6/
MOXF8 Remote Editor, the status will change to
ONLINE and the settings of the current Bank on the
MOXF6/MOXF8 Remote Editor will be transferred to
the MOXF6/MOXF8 automatically.
Save
Save As
(1 Bank)
n
The file created on the
MOX6/MOX8 Remote Editor
(extension: .X4R) can be
loaded to the MOXF6/
MOXF8 Remote Editor.
Operation flow from starting the application to closing it
MOXF6/MOXF8 Remote Editor Owner’s Manual
3
Operation flow from starting the application to
closing it
The MOXF6/MOXF8 Remote Editor is a software contained in the MOXF6/MOXF8 Remote Tools. After
installing the MOXF6/MOXF8 Remote Editor and related applications by following the Installation Guide of
the MOXF6/MOXF8 Remote Tools, follow the instructions below. Before starting, make sure that the MOXF6/
MOXF8 is properly connected to the computer via a USB cable. There is no single way to use the many
components in the MOXF6/MOXF8 Remote Editor. Your editing needs and preferences may differ; however,
the following example gives you a simple step-by-step guide in how to use the MOXF6/MOXF8 Remote
Editor.
n For details about connection between the MOXF6/MOXF8 instrument and a computer, refer to the Owner’s Manual of the
MOXF6/MOXF8.
n On the MOXF6/MOXF8, press the [UTILITY] to enter the Utility mode, then press the [F6] MIDI followed by the [SF4]
OTHER. On this display, set the MIDI In/Out parameter to “USB,” then press the [STORE] button to store this Utility setting.
n After completing installation of the MOXF6/MOXF8 Remote Editor, start the DAW software once then quit it. This operation
is necessary to scan through the DAW software for obtaining the VSTi-related information. Only DAW software produced
by Steinberg (such as Cubase) can be scanned.
1. Start the MOXF6/MOXF8 Remote Editor with the following operations.
Windows
[Start]
[All Programs] [Yamaha MOXF6_MOXF8 Remote Editor] [MOXF6_MOXF8
Remote Editor]
Mac
[Applications]
[Yamaha] [MOXF6_MOXF8] [MOXF6_MOXF8 Remote Editor]
The Auto Sync window appears and the settings of the 50 Control Templates on the MOXF6/MOXF8 are
transferred automatically to the Current Bank (page 9) of the MOXF6/MOXF8 Remote Editor.
Operation flow from starting the application to closing it
MOXF6/MOXF8 Remote Editor Owner’s Manual
4
After transfer has been successfully completed, the Edit window appears.
n If data transfer in the Auto Sync window fails even when the MOXF6/MOXF8 and computer are connected
properly, make sure to set the MIDI In/Out parameter to “USB” and the Device Number parameter to “1” or “All”
in the Utility MIDI display on the MOXF6/MOXF8.
2.Select “Setup” from the [File] menu to call up the Setup window.
3.Confirm that the MIDI Port is set to “Yamaha MOXF6/MOXF8,” then select the desired
DAW software from the DAW Select column.
If the MOXF6/MOXF8 and the MOXF6/MOXF8 Remote Editor are connected properly via USB, you can
confirm that the MIDI Port is set to “Yamaha MOXF6/MOXF8” when the above window appears. The
DAW selection is necessary for performing the Scan operation (“VSTi Database” menu in the [File]
menu) and obtaining the VSTi-related information.
Operation flow from starting the application to closing it
MOXF6/MOXF8 Remote Editor Owner’s Manual
5
4.Click [OK] to start the Scan operation.
The VSTi plug-ins registered to the specified DAW software will be scanned and the information
necessary for editing will be obtained.
After the scanning is completed, the previous display will appear. The setup of the MOXF6/MOXF8
Remote Editor is finished.
n If the VSTi scanning is not performed when you click [OK] in step 4, select [File] [VSTi Database] [Full
Scan] to execute scanning.
5.Start the DAW software (for example, Cubase).
6.Press the [DAW REMOTE] button on the MOXF6/MOXF8 instrument to enter the Remote
mode.
7. Select the Control Template, then edit the selected Control Template on the Edit window.
Perform the editing referring to the “
MOXF6/MOXF8
Remote Editor Window (
page 6
)” and “Menu (
page
9
).”
When the ONLINE status is turned on (when the MOXF6/MOXF8 and the MOXF6/MOXF8 Remote
Editor are connected properly via USB), setting the parameters on the MOXF6/MOXF8 Remote Editor
affects the settings of the same parameters on the MOXF6/MOXF8 in real time. This gives you a
convenient and useful way to edit while actually controlling the VSTi.
n Make sure to execute the [STORE] (page 6) operation before turning off the MOXF6/MOXF8 instrument.
Otherwise the editied Template data in the instrument will be lost.
8.After your editing session is finished, select [File] [Save] (or [Save As...]) to save the
bank to a file.
9.Click at the top left corner to quit the MOXF6/MOXF8 Remote Editor.
If the edited Bank data has not been saved yet, messages appear prompting you to save it. Save a Bank
file to quit the MOXF6/MOXF8 Remote Editor.
MOXF6/MOXF8 Remote Editor Windows: Edit window
MOXF6/MOXF8 Remote Editor Owner’s Manual
6
MOXF6/MOXF8 Remote Editor Windows
The MOXF6/MOXF8 Remote Editor consists of two windows: Edit and Library. The Edit window lets you edit
the settings of the selected Control Template while the Library window lets you import or copy Control
Template s .
Edit window
Always on Top button
Turning this button ( ) on keeps the MOXF6/MOXF8 Remote Editor's window always on top.
ONLINE indicator
Shows whether the MOXF6/MOXF8 Remote Editor and the MOXF6/MOXF8 are properly connected via
USB (ONLINE status). In the ONLINE status, this indicator lights in green and any operations on the
MOXF6/MOXF8 Remote Editor automatically change the parameter value on the MOXF6/MOXF8.
Library button
Calls up the Library window (page 9).
[Store] button
Calls up the Store confirmation window. On this window, clicking [YES] executes the Store operation
while clicking [NO] returns the Editor to the original status without any operation. The Store operation will
store all the 50 templates which are being edited to the Current Bank.
File Name
Displays the file name including the current edited Template.
-2
-1
-1
-2
MOXF6/MOXF8 Remote Editor Windows: Edit window
MOXF6/MOXF8 Remote Editor Owner’s Manual
7
/ mark
Shows the Editing status of the Control Template or Bank. The mark indicates that the current Control
Template has been modified but not yet stored. This indicator disappears if you click the [Store]
button and then execute the Template Save operation. The mark is also used to indicate that the
current Bank has been modified but not yet saved to a File. This indicator disappears if you execute the
File Save operation.
Control Template Selection box
Shows the currently selected Control Template. You can select the previous/next template by clicking the
scroll button at the right of this box, or select any template in the current bank by clicking the triangular
button.
Instrument Select box
Shows the VSTi name which is controlled by the Knobs. You can change the VSTi by clicking the
triangular button then selecting the desired one. You can also input the VSTi name directly in this box
manually. Make sure to input the VSTi name correctly.
n If the desired VSTi is not shown even when you click the triangular button, refer to the Troubleshooting section
on page 13.
Edit section
The Knobs illustrated here correspond to the Knobs on the top panel of the MOXF6/MOXF8. Here, you
can assign the desired function to each of the Knobs.
-1 Remote/CC buttons
When Remote is selected, using the Knobs generates the Remote Control messages exclusive for Cubase.
When CC is selected, using the Knobs generates MIDI Control Change messages.
-2 Function Assignment boxes
The Knobs illustrated here are equivalent to the Knobs on the MOXF6/MOXF8. Each of the boxes at the right
side of the Knob shows the function assigned to the corresponding Knob. (The function shown here differs
depending on the Remote/CC button status.) You can change the function assigned to each of the Knobs by
clicking a desired box, then selecting the desired function in the Controller Setting section. In the ONLINE
status, setting this parameter changes the settings of the MOXF6/MOXF8 in real time.
Controller Setting section
Determines the function of the Knobs corresponding to the column selected in the Edit section. There
are two sections here: Remote section and CC (Control Change) section.
-1 Remote section
Assigns the function to the Function Assignment box selected in the Edit section. The setting here is
available when the Remote/CC button is set to “Remote.” Clicking “Remote” at the left of this section also sets
the Remote/CC button of the Edit section to “Remote.
• Control Parameter
Click the triangular button to call up the menu, then select the desired function.
MOXF6/MOXF8 Remote Editor Windows: Edit window
MOXF6/MOXF8 Remote Editor Owner’s Manual
8
-2 CC (Control Change) section
Assigns the function to the Function Assignment box selected in the Edit section. The setting here is
available when the Remote/CC button is set to “CC.” Clicking “CC” at the left of this section also sets the
Remote/CC button of the Edit section to “CC.”
• CC Number (Control Change Number)
Determines the Control Change number. Selects the Control Change number by clicking one of the scroll
buttons at the right of this box. You can also input the Control Change number directly.
• Display Name
Selects the Knob’s function name which is to be shown on the display of the MOXF6/MOXF8 when the
Remote/CC button of Edit section is set to “CC.” Click the triangular button at the right of this box, then
select the desired one. You can also input the name directly.
• Display Format
Sets the value format shown on the display of the MOXF6/MOXF8 to “0 – 127” or “-64 – +63.”
Detail button
Clicking this button closes the Controller Settings section. Click this again to open the Controller Settings
section.
When closing the Controller Settings section
MOXF6/MOXF8 Remote Editor Windows: Library window
MOXF6/MOXF8 Remote Editor Owner’s Manual
9
Library window
Clicking the Library button on the Edit window opens the Library window.
Control Template List in the File
Displays a list of the Control Templates saved in the File. Select a target Control Template in this list and
a destination location in the Control Template List of the Current Bank, then click the [Import] button
to execute the Import operation. You can view the contents of the selected Control Template in the
Preview section.
n All the Templates listed here were stored to the Current Bank. This means that the Import operation will be
applied to the Templates which were already stored at the File Save timing and will not be applied to the
Templates which were not stored. If you want to import a specific Template from a file, make sure to store the
edited Template before saving the file.
Control Template List of the Current Bank
Displays a list of the Control Templates on the Current Bank. Select a desired Control Template in this list,
then click the [OK] button to return to the Edit window. You can view the contents of the selected Control
Template in the Preview section. You can also copy or paste a Control Template in this list.
File section
Clicking the icon in this section will call up the File Select dialog. In this dialog, select the file (saved
previously), then execute the File Select operation so that the Templates in the file are listed. In addition,
the name of the selected file appears in the window at the left of the icon.
[Import] button
Click this button to import the specific Control Template in the selected file to the Current Bank.
n The Import operation can be applied to just one Template at a time. You can import all Templates in the
selected file at the same time by operating [File] [Open] in the Edit window.
[OK] button
Click this button to fix the Current Bank and call up the Edit window. If the status is ONLINE, the selected
bank is also transferred to the MOXF6/MOXF8.
MOXF6/MOXF8 Remote Editor Windows: [File] menu
MOXF6/MOXF8 Remote Editor Owner’s Manual
10
[Cancel] button
Click this button to cancel editing for the Current Bank and call up the Edit window.
Preview
Shows the settings of the Control Template selected in the Control Template List.
[File] menu
New
Creates and opens a new Bank file containing the default setup. This menu is available when the Edit window is
shown.
Open
Opens a Bank saved in the File. This menu is available when the Edit window is shown.
Save
Saves the 50 currently edited (not stored) Templates as well as the 50 Templates which were stored to the Current
Bank by overwriting the File you called up when starting your editing session. This menu is available when the Edit
window is shown.
Save As
This lets you rename the File and save all the 50 Control Templates in the Current Bank and 50 currently edited
Control Templates. This menu is available when the Edit window is shown.
Import Template
Imports data of a single Bank including the 50 Control Templates from a file (extension: .X6R) to the Control
Template List in the File in the Library window. Selecting this menu performs the same action as clicking the icon
( ) in the File section in the Library window. This menu is available when the Library window is shown.
MOXF6/MOXF8 Remote Editor Windows: [File] menu
MOXF6/MOXF8 Remote Editor Owner’s Manual
11
Setup
Selects the MIDI port of the MOXF6/MOXF8 and the DAW software. Selecting this menu calls up the following
window. Set the parameters as necessary, then click [OK].
•MIDI Port
“Yamaha MOXF6/MOXF8” is automatically selected when the MOXF6/MOXF8 and the computer are connected
properly via USB.
•DAW Select
Specify the DAW software you are currently using here.
VSTi Database
Scans through the DAW software you are using and obtains the VSTi-related information necessary for editing.
This menu consists of the following two menus.
Selecting “Full Scan” scans the entire DAW software. When you scan the DAW for the first time, select “Full Scan.”
Selecting “Update” scans only the sections that have been updated since previous scanning. When you've
installed a new VSTi, select “Update.”
The “Full Scan” is automatically executed when you start the MOXF6/MOXF8 Remote Editor the first time or you
change the DAW Select settings in the Setup window.
MOXF6/MOXF8 Remote Editor Windows: [Edit] menu
MOXF6/MOXF8 Remote Editor Owner’s Manual
12
[Edit] menu
Copy
Copies the selected data to the clipboard.
Paste
Pastes the data on the clipboard to the specified location.
Initialize Template
Resets all settings of the selected Template in the Current Bank to the initial default values.
Reset to Stored Data
Restores all settings of all the Control Templates in the Current Bank and the MOXF6/MOXF8 instrument to the
latest stored setting. Selecting this menu will call up the dialog box. On this dialog box, clicking [OK] executes the
Reset operation while clicking [Cancel] returns the Editor to the original status without any operation.
Reset to Original Data at Startup
Restores all settings of all the Control Templates in the Current Bank and the MOXF6/MOXF8 instrument to the
previous settings, before the MOXF6/MOXF8 Remote Editor was opened. Selecting this menu will call up the
dialog box. On this dialog box, clicking [OK] executes the Reset operation while clicking [Cancel] returns the
Editor to the original status without any operation.
Reset to Factory Settings
Restores all settings of all the Control Templates in the Current Bank and the MOXF6/MOXF8 instrument to the
Factory default settings. Selecting this menu will call up the dialog box. On this dialog box, clicking [OK] executes
the Reset operation while clicking [Cancel] returns the Editor to the original status without any operation.
[Help] menu
Manual
Selecting this menu calls up this manual in PDF format.
About
Selecting this menu calls up information on the MOXF6/MOXF8 Remote Editor, including the version number.
Troubleshooting
MOXF6/MOXF8 Remote Editor Owner’s Manual
13
Troubleshooting
Even when I click the triangular button at the right of VSTi Select/Input box in the Edit
window, the VSTi plug-ins registered to the DAW software are not shown as expected.
• The MOXF6/MOXF8 Remote Editor may not properly recognize the VSTi registered in the DAW
software. Select [File] [VSTi Database] [Full Scan] to search the VSTi information (page 11).
The parameters set on the MOXF6/MOXF8 Remote Editor are not displayed on the
MOXF6/MOXF8.
• The display on the MOXF6/MOXF8 is based on the information sent from Cubase (see the illustration
above). Start Cubase and select the corresponding VSTi within Cubase.
Even when I change the VSTi on the DAW software such as Cubase, the Control
Template on the MOXF6/MOXF8 does not change corresponding to the newly
selected VSTi.
• The VSTi-related information is obtained through the Extension software (see the illustration below).
Make sure that the latest MOXF6/MOXF8 Extension is installed.
• Make sure that the VSTi name displayed on the DAW software is the same as the one shown in the
VSTi Select/Input box (page 7).
Data transfer between the MOXF6/MOXF8 Remote Editor, MOXF6/MOXF8 and DAW software:
Turning the Knobs on the MOXF6/MOXF8 affects Remote parameters other than
those intended for control.
• In Cubase, remove the checkmarks of “ALL MIDI Inputs” corresponding to MIDI Ports 2 and 5 for the
MOXF6/MOXF8 instrument.
Even when I click the triangular button at the right of Control Parameter in the Edit
window, the appropriate Control Parameters are not shown.
• Make sure that the VSTi is correctly selected in the VSTi Select/Input box (page 7). If you have input
the VSTi name directly, make sure that the spelling is correct and the placement of spaces (if any) is
correct. We recommend that you select the VSTi by clicking the triangular button at the right of VSTi
Select/Input box, instead of inputting the VSTi name directly.
DAW software (Cubase, etc.)
Note On/Off, Control Change
VSTi
MOXF6/MOXF8
Extension
Remote Control
VSTi parameters (name, value)
MOXF6/MOXF8 parameters
Port 1
Port 2
Port 5
Computer MOXF6/MOXF8
instrument
MOXF6/MOXF8
Remote Editor
Troubleshooting
MOXF6/MOXF8 Remote Editor Owner’s Manual
14
On the DAW software other than Cubase, the set parameters are not controlled.
• The Remote control functions are available only for Cubase. Set the Remote/CC buttons (page 7) to
“CC.”
• Make sure to select a parameter except to “Cubase” on the Daw Select display of the Utility mode in
the MOXF6/MOXF8 instrument.
Even when I select another track on the DAW software, the VSTi to be controlled does
not change; instead, the VSTi which is assigned to the previously selected track
remains under control.
• When using Cubase, select [Editing]-[Project & Mixer] on the Preferences dialog, then checkmark
both “Sync Project and Mixer Selection” and “Enable Record on Selected Track.”
• When using Cubase, select “Yamaha MOXF6/MOXF8” in the Remote Device Setup window, then
select Port 2 for the MOXF6/MOXF8 as the MIDI Input/Output.
• Make sure to set the MOXF6/MOXF8 instrument to the Remote mode. (page 5)
C.S.G., Digital Musical Instruments Division
© 2013 Yamaha Corporation
308MW-A0
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14

Yamaha MOXF6 Bruksanvisning

MOXF6
Yamaha
varumärke
Yamaha
Modell
MOXF6
Typ
Bruksanvisning
Denna manual är också lämplig för
Ladda ner pdf
Rapportera

på andra språk

Relaterade papper