CHTW300
Champion True Wireless Earphones
User Manual
ENGLISH
Included
2 x Bluetooth Earphones • Charging Case • User Manual
Charging Cable • Extra silicone earcaps size S and L
Specifications
Earphones
Bluetooth version: 5.0+ED
Support: HSP, HFP, A2DP, AVRCP
Battery: 50mah x 2 Li-polymer type
Working time: 4 hrs
Charging time: 1-2 hrs
Standy time: 80 hrs
Transmission distance: 10 m
Frequency range: 2.402-2.480GHz
Output voltage: 3. 7V
Charging Case
Battery capacity: 380mAh
Charging time: 2-3 hrs
Charging voltage: 5V/300mA
Earphones can be fully charged
3 times with a full charged case
Product overview
Earphones
1. Touch control surface
2. MIC
3. LED indicator
4. Magnetic charging slot
5. Right earphone
6. Left earphone
7. Silicone earcap size M
Charging Case
1. LED indikator
2. Micro USB charging port
How to wear
Insert the earphones into your
ears and place the earphones
like the picture.
Get started
Remove the earphones from
the package and place into
the charging case. Charge the
earphones completely before use.
Charging
Charging Case
1. Plug the charging cable into the Micro USB charging port in
the case and the other end into a USB power adapter or
laptop/desklop.
2. The LED indicator will turn white when charging.
3. The LED indicator will turn off when charging is completed.
4. Time for full charge is 2-3 hours.
Earphones
1. Put the earphones into the charging case.
2. The LED indicator will turn solid red when charging.
3. The LED indicator will turn off when charging is completed.
4. Time for full charge is 1-2 hours.
Wireless pairing
First time pairing
1. Turn off the Bluetooth on your device (eg smartphone). Make
sure your earphones and your device are within 1m of reach.
2. Open the charging case and take out both earphones. You will
hear a voice saying "Power on" and the LED light will turn blue.
3. After 3 seconds, the light of the left earphone (L) will flash blue
and red alternately automatically. You will hear a voice saying
"connected, right channel, left channel". The earphones are
now paired.
4. Now the voice says "pairing". Turn on the Bluetooth on your
device and select "CHTW300" from the list. When the pairing
is complete you will hear a voice saying "second device
connected" and the LED light flashes blue.
To pair manually, touch the Touch control surface in 5 seconds
until the LED light flashes red and blue. Pairing is now activated.
Second time and forward
The headphones are automatically paired when the headphones
are removed from the case. The left earphones will now
automatically connect to the device that you have paired the
earphones to.
If the earphones loses pairing
If the earphones loses contact with each other, and just one of
the earphone have sound, you must restore to factory settings.
To restore to factory settings
1. "Forget" the CHTW300 earphones in your device's
Bluetooth list.
2. Turn off the earphones by touching the Touch control
surface until the voice says "Power off".
3. Start the earphones by touching the Touch control surface
until the voice says "Power on".
4. Then touch the touch control surface again until the voice says
"Power off" and the earphones turn off.
5. The earphones are now in factory settings and you need to
pair the earphones again according to the instructions in
Wireless pairing - First time pairing.
Power on
Touch the Touch control surface for 2 seconds and the
earphones turns on.
From the charging case: Open the case and take out both
earphones.
Power off
Touch the Touch control surface for 6 seconds and the
earphones power off
Power off/charging: Put the earphones into the charging case.
Close the lid and the earphones will power off automatically and
enter charging mode.
LED indicators
Charging: Red-solid light
In pairing mode: Blue and red flash alternately
Connected: Blue flashes every 5 seconds
Unconnected: Blue flashes every 2 seconds
Low battery: Red light flashing
Touch control
Left earphone (L) Right earphone (R)
Play/Pause Touch twice Touch twice
Next track
Touch and hold for
4 seconds
-
Return to the
beginning of the
track
-
Touch and hold for
4 seconds
Siri/Google
assistant
(voice dial)
Touch and hold for
2 seconds
Touch and hold for
2 seconds
Take/end phone
call
Touch twice Touch twice
Reject phone call
Touch and hold for
2 seconds
Touch and hold for
2 seconds
The CHTW300 has no audio control. To adjust the volume,
you have to adjust manually on your device.
Safety and care
1. Keep the earphones from extrem heat and humidity. High heat
will decrease the lifespan of the earphones and battery.
2. The earphones should be charged at least once every
6 months.
3. Clean with a soft cloth, damp with diluted soap water solution
if necessary. Never use chemical cleaners.
4. Do not drop the earphones on hard surfaces.
5. Do not take the earphones apart.
6. When the earphones are not in use, store the earphones in
the charging case in a cool, dry place.
Champion, Makadamgatan 14, 254 64 Helsingborg, Sweden
www.championnordic.se, info@championnordic.se
Phone +46 42 25 23 00