Yamaha DX200 Bruksanvisning

Important Notices

The DX200 Editor is a comprehensive editing software program specially designed for

the DX200 Desktop Control Synthesizer - providing an easy, intuitive way to edit and

create your own original DX200 patterns for the DX200 Desktop Control Synthesizer.

IMPORTANT:

• Do not use any of the panel controls on an external synthesizer while editing the Patterns

with the DX200 Editor, since this may inadvertently change the settings of the DX200.

Copyright Notices

• The software and this owner's manual are the exclusive copyrights of Yamaha Corporation.

• Copying of the software or reproduction of this manual in whole or in part by any means is

expressly forbidden without the written consent of the manufacturer.

• Copying of the commercially available music sequence data and/or digital audio ﬁles is

strictly prohibited except for your personal use.

Trade Marks and Registered Trade Marks

• OMS

®

and are trademarks of Opcode Systems, Inc.

• The company names and product names in this Owner's Manual are the trademarks or regis-

tered trademarks of their respective companies.

Notices

• Yamaha makes no representations or warranties with regard to the use of the software and

documentation and cannot be held responsible for the results of the use of this manual and

the software.

• The windows and illustrations in this manual are for instructional purposes only, and may be

slightly different from the ones shown on your software.

January, 2001

YAMAHA CORPORATION

DX200 Editor

Manual

2

About the DX200 Editor

The DX200 Editor is a full-featured editing software program for the DX200 Desktop

Control Synthesizer, providing an exceptionally simple and convenient way to edit and

control all of the parameters on the DX200 Desktop Control Synthesizer --- even provid-

ing the same control format as used on the original DX7.

DX200 Editor lets you store your edits as an original pattern and save up to 64 patterns

directly to the DX200. Naturally, you can save additional sets of 128 patterns to ﬂoppy

disks or your hard disk drive as DX200 Files. The DX200 Editor also features a conve-

nient, easy-to-use DX Librarian that lets you organize your patterns.

Generally, editing on the DX200 Editor is done from the Main window (the window that

automatically appears when you call up the Editor). However, you can also use a sec-

ond window (the DX7 Edit Panel) to edit the Patterns. This lets you perform all edits just

as if you were using an actual DX7 synthesizer.

For general instructions and explanations on how to use the DX200 Editor, see Setting

and Changing Parameter Values and Toolbar. For information on speciﬁc, commonly

used operations, see Operations.

3

Operations

Selecting a DX200 pattern is the important ﬁrst step in editing. Once you've edited a

pattern you can store it to the DX200 or save it to a ﬂoppy disk/hard disk drive with other

patterns as a DX200 File.

• Make sure to store your edits to a pattern before selecting another pattern. If you've edited

the DX200 Editor parameters and then select a different pattern, all your edited parameters

will be replaced by those of the newly selected pattern.

z

Select "DX200 Pattern List."

Click "Edit" on the menu bar, then select "DX200 Pattern List."

You can also quickly call up this dialog box by clicking any inactive part of the win-

dow pressing control key and clicking "DX200 Pattern List" in the pop-up menu. Or,

you can click "Edit" on the menu bar, then select "DX200 Pattern List."

x

Select the desired pattern.

Click on the desired pattern, then close the dialog box (click the close button) to

return to the DX200 Editor window.

• You can play the currently selected pattern by clicking on the keys of the keyboard in the DX7

Simulator window.

Selecting a DX200 Pattern

4

Operations /

Opening the Various Windows

DX200 Editor Main Window

This window provides a comprehensive, at-a-glance display of all DX200 pattern

parameters, and allows you to easily change any desired parameter. (For more

information, see Editing a DX Pattern.)

Alternately, click "Edit" on the menu bar, then select "DX7 Simulator." You can also

call it up from the toolbar.

Opening the Various Windows

5

Operations /

Opening the Various Windows

• About the [<= DETAIL] button

Clicking this button lets you toggle between the full editing display (with all parameters

shown) and a smaller editing display (with a limited parameter set). The smaller display

leaves out many of the more detailed parameters, making the editing display less clut-

tered and easier to handle.

Free EG Window

This window contains the versatile Free EG function, which gives you four tracks for

recording complex real-time parameter changes. To call up the window, click the

"FREE EG" button at the top of the Main window.

6

Operations /

Opening the Various Windows

Step Sequencer Window

This window contains the convenient Step Sequencer function, which allows you to

quickly and easily create sophisticated looped Sequences. To call up the window,

click the "STEP SEQ." button at the top of the Main window.

DX7 Simulator Panel Window

Select this window by clicking "Edit" on the menu bar, then selecting "DX7 Simula-

tor." You can also call it up from the toolbar.

No editing functions are directly available from the DX7 Simulator window. How-

ever, from this window you can:

• Audition the currently selected pattern by clicking on the keys of the keyboard.

• Open a DX200 File by clicking on the cartridge or cartridge slot.

• Open the Edit Panel windows (below).

7

Operations /

Opening the Various Windows

DX7 Edit Panel Window

This window provides a "virtual" DX7 panel, and lets you edit the patterns much as

you would if you were operating the panel controls of an actual DX7 keyboard. (For

more information, DX7 Edit Panel Window.)

To call up this window, click anywhere on the panel control area of the DX7 Simula-

tor Panel window.

8

Operations /

Opening the Various Windows

Selecting a Mode – Play, Edit or Function

In the Edit Panel window, you can select from among the three main modes: Play, Edit

and Function.

• Play Mode

In the play mode, you can:

• Select one of the 128 patterns.

• Play the selected pattern (from the DX200's keyboard or from the keys in the DX7

Simulator window).

To select the Play mode:

Click one of the [MEMORY SELECT] buttons: [1-32] or [33-64].

•Edit Mode

In the Edit mode, you can:

• Edit the pattern, using the Edit parameters (printed in lavender above each but-

ton).

To select the Edit mode:

Click the [EDIT] button.

• Function Mode

In the Function mode, you can:

• Edit the Function (global) parameters of the pattern (printed in yellow below the

appropriate buttons). These include other miscellaneous Function parameters as

well, such as Edit Recall and Pattern Initialize.

To select the Function mode:

Click the [FUNCTION] button.

9

Operations /

Editing a DX200 Pattern

z

Select the desired pattern.

Refer to Selecting a DX200 Pattern.

x

Edit the pattern parameters as desired.

c

Store the edited settings as a pattern, then save it with other

edited patterns as a DX200 File.

Use the Store operation to store your newly edited pattern. Then use the Save

operation to save that edited pattern with other User Patterns to a DX200 File.

Both the Store and Save operations are necessary to ensure that your pattern is

saved properly. Failing to do so would be roughly similar to writing a letter but not

putting it in an envelope. Make sure to execute both operations when you wish to

keep a pattern you've edited.

Editing a DX200 Pattern

10

Operations /

Compare

This function lets you switch back and forth between the current edited condition of the

pattern and its original un-edited condition. This allows you to easily hear and compare

the changes you make to a pattern with its original condition.

z

Edit the pattern as desired.

x

Select "DX200 Compare."

Click "Edit" on the menu bar, then select "DX200 Compare."

You can also quickly use Compare by clicking any inactive part of the window

pressing control key and clicking "DX Compare" in the pop-up menu.

In the Compare condition, a check appears beside "DX200 Compare" in the menu.

All parameter values are ghosted (in gray) and cannot be edited. Play the con-

nected MIDI keyboard (or click the keys in the DX7 Simulator window) to hear the

original un-edited pattern.

c

Select "DX200 Compare" again to return to the edited condition.

Do this as often as you wish to go back and forth between the two conditions.

• "DX200 Compare" is ghosted (gray) and cannot be selected if the pattern has not yet been

edited.

• The Compare function can be used with the parameter in the Main Window and with Tempo

and Swing in the Step Sequencer window.

Compare

11

Operations /

Initializing a DX200 Pattern to the Default Settings

This function allows you to reset all the parameters of the selected pattern to the factory

"initial pattern default values". This gives you a "blank slate" from which you can create

your own pattern.

Keep in mind that this operation automatically erases all the settings of the selected pat-

tern. If you wish to save the pattern for future recall, use the Store and Save functions.

z

Select "DX200 Pattern List."

Click "Edit" on the menu bar, then select "DX200 Pattern List."

You can also quickly call up this dialog box by clicking any inactive part of the win-

dow pressing control key and clicking "DX200 Pattern List" in the pop-up menu.

x

Select the desired pattern to be initialized.

Click on the desired pattern.

c

Initialize the pattern.

Click the "Pattern Init." button in the dialog box. The speciﬁed pattern is initialized

and automatically selected for editing.

To return to the DX200 Editor window, close the dialog box (click the close button).

Initializing a DX200 Pattern to the Default Settings

12

Operations /

Storing a DX200 Pattern

This operation lets you store your pattern edits as a User pattern.

• To ensure that your new pattern is available for future recall, make sure to also save the pat-

tern (with other patterns) to a DX200 File.

z

Select "DX200 Store."

Click "Edit" on the menu bar, then select "DX200 Store."

You can also quickly call up this dialog box by clicking any inactive part of the win-

dow pressing control key and clicking "DX200 Store" in the pop-up menu.

x

Select the destination pattern.

Click on the desired pattern in the dialog box.

c

Store the pattern.

Click the "Store" button in the dialog box. The speciﬁed pattern is replaced with the

newly edited pattern.

• This operation deletes the original pattern data at the destination.

Storing a DX200 Pattern

13

Operations /

Saving Patterns to a DX200 File

Once you've edited a DX200 pattern to your satisfaction you can save it to a DX200 File.

Each DX200 File can contain up to 64 patterns, and these can be called up at any time

with the Open command. (Also see Calling Up Patterns from a DX200 File.)

Additional DX200 Files of 128 patterns each can be saved to ﬂoppy disks or your hard

disk drive as DX200 Files --- giving you unlimited storage for your original patterns. For

organizing the patterns in the DX200 Files, use the convenient DX200 Librarian func-

tion.

z

Select "Save DX200 File."

Click "File" on the menu bar, then select "Save DX200 File."

• "Save DX200 File" can also be selected from the toolbar.

x

Select the desired folder, type in the ﬁle name, and click "Save."

Saving Patterns to a DX200 File

14

Operations /

Calling Up Patterns from a DX200 File (Open)

Once you've saved a set of User patterns to one or more DX200 Files (see Saving Pat-

terns), you can instantly call up the desired patterns with this command.

To create a new DX200 File, use the New DX200 File command.

z

Select "Open DX200 File."

Click "File" on the menu bar, then select "Open DX200 File."

x

Select the desired folder and ﬁle name, then click "Open."

• "Open DX200 File" can also be selected by clicking on the cartridge slot in the DX7 Simulator

window. (When a DX200 File has been opened, a cartridge is shown in the slot.)

Calling Up Patterns from a DX200 File (Open)

15

Operations /

Receiving Pattern/Voice Data from a DX200/DX7 Series Instrument

This operation lets you transfer pattern data from an instrument of the DX7 Series. A

single pattern or 128 patterns can be received. (See Receive DX200 Bulk Dump Data).

z

Select "Receive DX200 Bulk Dump Data" from the Setup menu.

x

Select the desired Receive Method ("1 Voice/Pattern" or "All Pat-

terns/Voices") and Machine (DX200 or DX7 Series).

c

Click "Start." The "Start" button changes to "Stop" and the

operation is set to standby (waiting for incoming data).

v

Transmit the data from the DX200 or other instrument. (See the

owner's manual of the instrument for instructions.)

• Make sure that the MIDI connections and settings are appropriate. (This includes the "DX200

Editor Setup.")

b

As soon as the DX200 Editor starts receiving data, the progress

bar moves, indicating the amount of data received. When the

bar is completely ﬁlled, the operation is complete.

To cancel the operation, click "Stop."

n

Click "OK" to exit the operation.

Receiving Pattern/Voice Data from a DX200/DX7 Series Instrument

16

Parameters

Virtually all of the DX200 Editor parameters for editing the DX200 patterns are con-

tained in the Main control panel window. From this main panel, you can also jump to

other windows for controlling additional DX200 functions (such as the Free EG, Step

Sequencer, and DX7 Simulator).

This is the primary editing window for the DX200 Editor. Virtually all editing functions

and operations are done from this window.

To change any of the parameter values, click on the desired parameter so it is high-

lighted, then type in the value from the keyboard and press [ENTER].

You can also use the mouse to change the values or settings. Click on the desired

parameter, move the cursor to the top or bottom of the box (to select the "up" arrow or

the "down" arrow, respectively), then click the mouse button to increase or decrease the

value. (Clicking with the "up" arrow increases the value; clicking with the "down" arrow

decreases it.)

Alternately, drag the mouse to continuously change values. Click on the parameter and

drag horizontally or vertically as desired. Dragging to the left or down decreases the

value, and dragging right or up increases it. The parameter value changes accordingly.

Any parameter changes are output as MIDI data, to the DX200.

DX200 Editor Main Window

17

Parameters /

DX200 Editor Main Window

• About the EG combo box and EG window

Also contained in the Main window is a special EG window, from which you can use the

mouse to "draw" envelopes for each Operator's EG, as well as the Pitch EG and Filter

EG.

To use this, click on the down arrow above the window, and select the EG you wish to

edit. Then, click on one of the box "joints" and drag it to change the EG settings. The

current relevant EG values appear at the cursor as you drag it.

• About the DX200 Copy Tool

This convenient function lets you copy the various settings (including EG) from one Oper-

ator to another Operator. Click on any inactive part of the panel in the Main window

pressing control key and select "DX Copy Tool" from the pop-up menu. Then, from the

Copy Tool window, click and drag the Operator or EG you want to copy to the destination

Operator or EG. (For more information, see [DX200 Copy Tool] dialog.)

• The Pitch EG is displayed in the DX200 Copy Tool window only for viewing the EG shape. It

cannot be copied to an Operator, nor can an Operator EG be copied to it.

• About the [<= DETAIL] button

Clicking this button lets you toggle between the full editing display (with all parameters

shown) and a smaller editing display (with a limited parameter set). The smaller display

leaves out many of the more detailed parameters, making the editing display less clut-

tered and easier to handle.

18

Parameters /

DX200 Editor Main Window

• Toolbar

The toolbar gives you quick access to some important functions and controls. These

buttons let you easily execute the desired function without having to select a menu.

Open DX200 Editor File

This is the same as the corresponding command in the File menu. It lets you select and

open an existing DX200 File. (See File Menus, Open DX200 File.)

Save DX200 Editor File

This is the same as the corresponding command in the File menu. It lets you save the

current set of User patterns as a DX200 Editor File for future recall. (See File Menus,

Save DX200 File.)

DX200 Editor Setup

This is the same as the corresponding command in the Setup menu. It lets you make

various important settings for conﬁguring the DX200 Editor with the DX200. (See Setup

Menus, DX200 Editor Setup.)

Transmit DX200 Bulk Dump Data

This is the same as the corresponding command in the Setup menu. It lets you transmit

the current DX200 Editor settings as MIDI data to the DX200. (See Setup Menus, Trans-

mit DX200 Bulk Dump Data.)

Receive DX200 Bulk Dump Data

This is the same as the corresponding command in the Setup menu. It lets you receive

the current DX200 Editor settings as MIDI data from a DX7, DX7II or other DX-compati-

ble instrument. (See Setup Menus, Receive DX200 Bulk Dump Data. Also see Receiv-

ing Pattern/Voice Data from a DX200/DX7 Series Instrument)

Open DX7 Simulator

This is the same as the corresponding command in the Edit menu. It lets you open the

DX7 Simulator. (See Edit Menus, Open DX7 Simulator.)

19

Parameters /

DX200 Editor Main Window

■

Setting and Changing Parameter Values ...................

• The conventions described here pertain primarily to the DX200 Editor Main Window. For

information on the controls in the Edit Panel window, see Edit Panel Window / Play and Edit

Modes.

• Combo boxes

For combo boxes (such as the EG select box in Main, or Track Parameter in Free EG),

click the down arrow to expand the box, then highlight the desired setting.

• Parameter sliders

For parameter sliders, click and hold the slider, then drag as desired. Alternately, click

and hold any position along the slider path; the slider automatically snaps to the new

position.

20

Parameters /

DX200 Editor Main Window

• Incrementing/decrementing values

Values and settings in the Main window can be changed by clicking on the value box, and

then dragging the cursor up or down (or right/left), in the direction of the desired change.

To increment or decrement a value, click on the desired parameter, move the cursor to

the top or bottom of the box (to select the "up" arrow or the "down" arrow, respectively),

then click the mouse button to increase or decrease the value. (Clicking with the "up"

arrow increases the value; clicking with the "down" arrow decreases it.) The cursor keys

on the keyboard can be used to move around the parameter grid of the DX200 Editor

window.

• Typing values directly

Most parameters in the Main Window can also be set by typing the value directly in the

value box. Click on the box, then type the desired value and press [enter]. Once a value

box has been selected, you can also use the mouse to change the value (as described

above).

• The [enter] key have no effect in the Pattern Name parameter.

Sidan laddas ...

Yamaha DX200 Bruksanvisning

Yamaha DX200 Bruksanvisning

på andra språk

Relaterade papper

Andra dokument