Creative MuVo_2_QSG Användarmanual

Typ
Användarmanual
1
English
A Tour of Your Player
On/Off and
Play/Pause button
Liquid Crystal
Display (LCD)
Menu button
Front view
Earphones / wired
remote (optional) jack
USB
port
Power adapter
jack
To p v i ew
Multi_cle.book Page 1 Monday, September 20, 2004 12:36 PM
2
Using the Menu Button
Select
The Menu button (Figure 1) is one of the most important features of your
player. In this document, we will use the term, “Select”, to mean that you
should move the Menu button towards the left or right to browse through
options, and then select the option by pressing the Menu button.
Volume
You can also adjust volume levels with the Menu button.
Move the Menu button upward to increase volume or downward to decrease volume.
Using Your Player
Button What It Does Usage Tips
Menu
Displays Menu options on
the LCD.
For more information on using the Menu
button, see "Using the Menu Button"
above.
Play/Pause
Turns your player on and
off.
Enables playing and pausing
of tracks.
Press and hold to turn your player on and
off.
In Music mode, press this button to start
playing tracks, and press again to pause
playback.
Figure 1
Multi_cle.book Page 2 Monday, September 20, 2004 12:36 PM
3
Indicator What It Does Usage Tips
Previous
Goes to the previous track. Move and hold the Menu button towards
to move back within a track.
Next
Goes to the next track. Move and hold the Menu button towards
to move ahead within a track.
Volume Increase
Increases the volume. Move and hold the Menu button towards
to increase the volume quickly.
Move and release the Menu button towards
to increase volume incrementally.
Volume Decrease
Decreases the volume. Move and hold the Menu button towards
to decrease the volume quickly.
Move and release the Menu button towards
to decrease volume incrementally.
Jack / Port What It Does Usage Tips
Power adapter jack
Connect your power
adapter to this jack.
USB port
Connect your USB cable to
this port.
Earphones /
wired remote
(optional) jack
Connect your earphones or
wired remote (optional) to
this jack.
Multi_cle.book Page 3 Monday, September 20, 2004 12:36 PM
4
Getting Started
1
1
Setting Up Your Computer
1. Ensure that your player is NOT connected to your computer.
2. Insert the Creative MuVo
2
CD into your CD-ROM/DVD-ROM drive. Your CD should
start automatically. If it does not, follow the steps below:
i. Start Windows Explorer.
ii. On the left pane, click the My Computer icon.
iii. Right-click the CD-ROM/DVD-ROM drive icon, and then click AutoPlay.
3. Follow the instructions on the screen to complete the installation. Creative
MediaSource™ and Windows 98 SE drivers (only if applicable) will be installed on your
computer.
4. When prompted, restart your computer.
Do not charge your player’s battery via the USB port until after you have installed
the software.
Multi_cle.book Page 4 Monday, September 20, 2004 12:36 PM
5
2
2
Inserting the Battery
Insert the supplied battery into your player as shown below.
3
3
Charging the Battery
You can charge your battery by connecting your player to a power outlet using the supplied
power adapter, or by connecting your player to your computer’s USB port using the
supplied USB cable.
Using the power adapter
Connect one end of the power adapter to the wall outlet
and the other end to your player’s power adapter
connector, as shown in Figure 2. Charging your battery for
the first time takes about three hours. When appears
on your player's LCD, your player is fully charged.
You can also charge your player’s battery using the supplied USB cable. For more
information, see “Using the USB Cable” in your User’s Guide. Do not charge your
player’s battery via the USB port until after you have installed the software.
Figure 2
Multi_cle.book Page 5 Monday, September 20, 2004 12:36 PM
6
4
44
Transferring Audio and Data
Audio selections have been preloaded to your player to get you started quickly.
If you wish to listen to music immediately, simply press the Play/Pause button .
If you wish to download additional music tracks to your player, you can either download
music tracks from Internet music sites (see "Downloading from the Internet" in your User’s
Guide) or rip them from your audio CDs to create digital files on your computer. For more
information, see "Ripping Audios CDs" in your Users Guide.
Data files can also be transferred to and stored in your player, for example, you can transfer
a large data file from one computer to another. Data can be transferred to your player with
the Creative MediaSource application.
To transfer audio and data with Creative MediaSource
1. Connect your player to your computer’s USB port using the supplied USB cable.
2. Launch Creative MediaSource on your computer.
3. On the left pane, locate and select the files you want to transfer to your player. Using
the standard drag-and-drop method, transfer the files to your player.
For information about transferring DRM-protected WMA files, see “Frequently Asked
Questions” on page 12.
4. After the transfer is complete, stop your player properly before disconnecting it from
your computer. For more details, see “Step 5: Stopping Your Player Properly” on
page 7.
Do not disconnect your player while file transfer is in progress.
Multi_cle.book Page 6 Monday, September 20, 2004 12:36 PM
7
5
5
Stopping Your Player Properly
Before disconnecting your player from your computer, use the Windows Eject or Safely
Remove Hardware icon on the Taskbar to safely disconnect your player. If your player
is not disconnected safely, the content may become corrupted and the player will not
function correctly. Follow these steps below to safely disconnect your player:
Windows XP, Windows Me and Windows 2000
1. Click the Safely Remove Hardware icon on the Taskbar and click Safely
remove USB Mass Storage Device as shown.
2. Unplug your player when you are prompted to do so.
Windows 98 SE
1. Wait at least 10 seconds after all file transfers are completed.
2. In Windows Explorer, right-click the Removable Disk icon and click Eject.
3. Unplug your player after 10 seconds.
Multi_cle.book Page 7 Monday, September 20, 2004 12:36 PM
8
Some Basic Functions
Playing Audio Tracks
Audio selections have been preloaded to your player to get you started quickly.
If you wish to listen to music immediately, simply press the Play/Pause button .
To add audio tracks to your player, see “Transferring Audio and Data” on page 6.
To p l ay t r a c k s
1. Press the Menu button.
2. Select the Music icon (Figure 3).
3. Select the track you want to play and press the Play/
Pause button .
To pause a track
Press the Play/Pause button .
Managing Audio Tracks
For more advanced song management tasks, such as creating and managing playlists, you
can use Creative MediaSource Organizer. Creative MediaSource Player/Organizer is your
digital audio center for playing, creating, organizing and transferring digital audio. To launch
Creative MediaSource Player/Organizer, double-click the Creative MediaSource Player/
Organizer icon on your desktop.
For more information, read the User’s Guide on the Installation CD.
Go to d:\manual\<language>\manual.pdf (replace d:\ with the drive letter of your CD-ROM/
DVD-ROM drive, and <language> for the language the document is in)
Figure 3
Multi_cle.book Page 8 Monday, September 20, 2004 12:36 PM
9
Usage Precautions
What to do if your player was disconnected
improperly
If your player was disconnected improperly, one of two possible error messages may appear
on your player's screen:
In this case, to recover files on your player, do the following:
1. Reconnect your player to your computer.
2. In Windows Explorer, right-click the Removable Disk icon and select the
Properties option. Depending on your computer's settings, you may see an icon with
the name of your player, instead of a Removable Disk icon.
3. Click the To o l s tab, and then click the Check Now button. A dialog box appears.
4. Be sure that the Automatically fix file system errors option is selected. All other
options should not be selected.
5. Click the Start button.
When error checking is complete, safely unplug your player from your computer. See
“Stopping Your Player Properly” on page 7.
Scenario A
Multi_cle.book Page 9 Monday, September 20, 2004 12:36 PM
10
In this case, to recover files on your player, do the following:
1. Press the Menu button (follow steps 1-6 on page 11).
The Recovery Mode screen (Figure 4) appears.
2. Select the Run PC ScanDisk option.
3. Connect your player to your computer, via the USB
cable.
4. In Windows Explorer, right-click the Removable Disk icon and select the
Properties option. Depending on your computer's settings, you may see an icon with
the name of your player, instead of a Removable Disk icon.
5. Click the To o l s tab, and then click the Check Now button.
6. Be sure that the Automatically fix file system errors option is selected. All other
options should not be selected.
7. Click the Start button.
8. When error checking is complete, safely unplug your player from your computer. See
“Stopping Your Player Properly” on page 7.
Scenario B
Figure 4
If you continue to experience problems with your player, you may need to select the
Format all option to clean your player's storage memory. Doing so will erase all the
files on your player.
Multi_cle.book Page 10 Monday, September 20, 2004 12:36 PM
11
What to do if your player stops functioning
normally
Your player may stop functioning normally if any or all of the
following occurs:
Your computer stops responding during file transfers.
There is a power outage during file transfers.
Your player was unplugged, or files were being deleted during file transfers.
When this happens, you can try to recover your player using the
unique Recovery Mode:
1. Press and hold the Play/Pause button until your player turns off. If you are
unable to turn off your player, proceed to the next step.
2. Disconnect all cables from your player and remove the player's battery.
3. Re-insert the battery and turn your player on to see if it starts functioning normally. If
it does not, remove the battery again and proceed to the next step.
4. Press and hold the Menu button. While holding down the Menu button, re-insert the
battery, or connect your player to a power outlet using the supplied power adapter.
5. Release the Menu button when the Recovery Mode
screen appears (Figure 5). If the Recovery Mode
message does not appear, repeat steps 2 and 3.
6. Select the recovery actions.
Figure 5
Multi_cle.book Page 11 Monday, September 20, 2004 12:36 PM
12
Frequently Asked Questions
Where can I get official information on my player?
Visit www.creative.com for updates and downloads relating to your player, Creative’s
digital audio players and accessories.
How can I get accessories for my player?
Visit www.creative.com for the latest news on accessories.
Can I jog with my player?
You should not subject your player to continuous shocks, such as those that are likely to
occur while you jog or run.
Can I use the player for portable data storage?
Yes. You can use the supplied USB cable for speedy transfers to and from your player. Use
the Creative MediaSource application or Windows Explorer to help you manage data files.
Should I leave my power adapter plugged into my player?
No, you should not. After charging the battery or using the player, disconnect it from the
power adapter. Leaving it plugged in leads to heat buildup, which is not good for the player
or the battery.
If I damage or lose my power adapter, can I buy a similar, off-the-shelf adapter?
No. The adapter may not be compatible with your player, and may even damage it. You
should get a replacement adapter from Creative at www.creative.com, or your local
Creative office/distributor.
Multi_cle.book Page 12 Monday, September 20, 2004 12:36 PM
13
I have to recharge the battery quite often. Is there anything I can do to make it
last longer?
Generally, any operation requiring the player to access the hard disk uses battery power.
Consequently, filling your player to capacity is not recommended. However, some
operations consume more battery power:
a long backlight timeout setting. A shorter timeout conserves battery power.
a high contrast setting. Position the player so that you can read the display without using
a high contrast setting.
too much use of fast forward/reverse.
turning the player on/off too many times.
prolonged use at high volumes.
Can I transfer DRM-protected WMA files to my player?
Yes. To transfer DRM-protected WMA files to your player, you can use Creative
MediaSource or Windows Media Player.
Multi_cle.book Page 13 Monday, September 20, 2004 12:36 PM
14
More Information
Register your product!
Enjoy a host of benefits by registering your product during installation, or at
www.creative.com/register. Benefits include:
Service and product support from Creative
Exclusive updates on promotions and events.
Customer Support Services and Warranty
You can find Customer Support Services, Warranty and other information in the
Installation CD.
(replace d:\ with the drive letter of your CD-ROM/DVD-ROM drive, <region> with the region that you
are in, and <language> with the language that your document is in)
Customer Support Services d:\support\<language>\support.pdf
Warranty d:\warranty\<region>\<language>\warranty.pdf
Please keep your Proof of Purchase for the duration of the warranty
period.
User’s Guide d:\manual\<language>\manual.pdf
Creative Knowledge Base
Resolve and troubleshoot technical queries at Creative's 24-hour self-help
Knowledge Base. Go to www.creative.com and select your region.
Copyright © 2004 Creative Technology Ltd. All rights reserved. The Creative logo, MuVo and Creative MediaSource are
trademarks or registered trademarks of Creative Technology Ltd. in the United States and/or other countries. Microsoft,
Windows and the Windows logo are registered trademarks of Microsoft Corporation. All other products are trademarks
or registered trademarks of their respective owners and are hereby recognized as such. All specifications are subject to
change without prior notice. Actual contents may differ slightly from those pictured.
Multi_cle.book Page 14 Monday, September 20, 2004 12:36 PM
15
Safety Advice
As with any digital media-based storage device, data should be backed up regularly. We
strongly recommend that you observe the usage precautions laid out in this booklet, and
also back up the data in your player regularly. In no event will Creative be liable for any
indirect, incidental, special or consequential damages to any persons caused by Creative's
negligence, or for any lost profits, lost savings, loss of use, lost revenues or lost data
arising from or relating to this device, even if Creative has been advised of the possibility
of such damages. In no event will Creative’s liability or damages to you or any other
person ever exceed the amount paid by you for the device, regardless of the form of the
claim. Some countries/states do not allow the limitation or exclusion of liability for
incidental or consequential damages, so the above limitation or exclusion may not apply
to you.
Multi_cle.book Page 15 Monday, September 20, 2004 12:36 PM
16
Français
Présentation générale du lecteur
Bouton Marche/
Arrêt et
Lecture/Pause
Ecran à cristaux
liquides (LCD)
Bouton Menu
Vue avant
Prise pour écouteurs /
télécommande câblée (en option)
Port
USB
Prise pour
adaptateur
secteur
Vue du dessus
Multi_cle.book Page 16 Monday, September 20, 2004 12:36 PM
17
Utilisation du bouton Menu
Sélection
Le bouton Menu (Figure 1) est l'une des principales fonctions du lecteur.
Dans ce document, le verbe « sélectionner » indique que vous devez
déplacer le bouton Menu vers la gauche ou la droite pour parcourir les
options puis sélectionner celle de votre choix en appuyant sur ce bouton.
Volume
Vous pouvez également régler le niveau de volume à l'aide du bouton Menu.
Déplacez le bouton Menu vers le haut pour augmenter le volume ou vers le bas pour le
diminuer.
Utilisation du lecteur
Bouton Fonction Conseils d'utilisation
Menu
Affiche les options du menu
sur l'écran LCD.
Pour plus d'informations sur l'utilisation du
bouton Menu, voir « Utilisation du bouton
Menu » ci-dessus.
Lecture/Pause
Permet de mettre le lecteur
sous et hors tension.
Permet de lire des pistes et
d'interrompre leur lecture.
Appuyez sur ce bouton et maintenez-le
enfoncé pour mettre le lecteur sous et hors
tension.
En mode Musique, appuyez sur ce bouton
pour commencer la lecture des pistes et
rappuyez dessus pour interrompre la
lecture.
Figure 1
Multi_cle.book Page 17 Monday, September 20, 2004 12:36 PM
18
Indicateur Fonction Conseils d'utilisation
Précédent
Permet de revenir à la piste
précédente.
Déplacez le bouton Menu vers et
maintenez-le enfoncé pour revenir en
arrière dans une piste.
Suivant
Permet de passer à la piste
suivante.
Déplacez le bouton Menu vers et
maintenez-le enfoncé pour avancer dans
une piste.
Augmentation du
volume
Permet d'augmenter le
volume.
Déplacez le bouton Menu vers et
maintenez-le enfoncé pour augmenter
rapidement le volume.
Déplacez le bouton Menu vers et
relâchez-le pour augmenter
progressivement le volume.
Diminution du
volume
Permet de diminuer le
volume.
Déplacez le bouton Menu vers et
maintenez-le enfoncé pour diminuer
rapidement le volume.
Déplacez le bouton Menu vers et
relâchez-le pour diminuer progressivement
le volume.
Multi_cle.book Page 18 Monday, September 20, 2004 12:36 PM
19
Prise / Port Fonction Conseils d'utilisation
Prise pour
adaptateur secteur
Permet de connecter votre
adaptateur secteur.
Port USB
Permet de connecter votre
câble USB.
Prise pour
écouteurs /
télécommande
câblée (en option)
Permet de connecter vos
écouteurs ou votre
télécommande câblée (en
option).
Multi_cle.book Page 19 Monday, September 20, 2004 12:36 PM
20
Démarrage
1
1
Configuration de votre ordinateur
1. Assurez-vous que le lecteur n'est PAS connecté à l’ordinateur.
2. Insérez le CD Creative MuVo
2
dans le lecteur de CD-ROM/DVD-ROM. La lecture du
CD doit commencer automatiquement. Dans le cas contraire, procédez comme suit :
i. Démarrez l’Explorateur Windows.
ii. Dans le volet gauche, cliquez sur l'icône Poste de travail.
iii. Cliquez avec le bouton droit sur l'icône du lecteur de CD-ROM/DVD-ROM, puis cliquez sur
Exécution automatique.
3. Respectez les instructions qui s'affichent à l’écran pour terminer l’installation. Les
pilotes Creative MediaSource™ et Windows 98 Deuxième Edition (le cas échéant
uniquement) seront installés sur votre ordinateur.
4. A l'invite, redémarrez votre ordinateur.
Ne chargez pas la pile du lecteur à l'aide du port USB avant d'avoir installé le
logiciel.
Multi_cle.book Page 20 Monday, September 20, 2004 12:36 PM
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120
  • Page 121 121
  • Page 122 122
  • Page 123 123
  • Page 124 124
  • Page 125 125
  • Page 126 126
  • Page 127 127
  • Page 128 128
  • Page 129 129
  • Page 130 130
  • Page 131 131
  • Page 132 132
  • Page 133 133
  • Page 134 134
  • Page 135 135
  • Page 136 136
  • Page 137 137
  • Page 138 138
  • Page 139 139
  • Page 140 140
  • Page 141 141
  • Page 142 142
  • Page 143 143
  • Page 144 144
  • Page 145 145
  • Page 146 146
  • Page 147 147
  • Page 148 148
  • Page 149 149
  • Page 150 150
  • Page 151 151
  • Page 152 152
  • Page 153 153
  • Page 154 154
  • Page 155 155
  • Page 156 156
  • Page 157 157
  • Page 158 158
  • Page 159 159
  • Page 160 160
  • Page 161 161
  • Page 162 162
  • Page 163 163
  • Page 164 164
  • Page 165 165
  • Page 166 166
  • Page 167 167
  • Page 168 168
  • Page 169 169
  • Page 170 170
  • Page 171 171
  • Page 172 172
  • Page 173 173
  • Page 174 174
  • Page 175 175
  • Page 176 176
  • Page 177 177
  • Page 178 178
  • Page 179 179
  • Page 180 180
  • Page 181 181
  • Page 182 182
  • Page 183 183
  • Page 184 184
  • Page 185 185
  • Page 186 186
  • Page 187 187
  • Page 188 188
  • Page 189 189
  • Page 190 190
  • Page 191 191
  • Page 192 192
  • Page 193 193
  • Page 194 194
  • Page 195 195
  • Page 196 196
  • Page 197 197
  • Page 198 198
  • Page 199 199
  • Page 200 200
  • Page 201 201
  • Page 202 202
  • Page 203 203
  • Page 204 204
  • Page 205 205
  • Page 206 206
  • Page 207 207
  • Page 208 208
  • Page 209 209
  • Page 210 210
  • Page 211 211
  • Page 212 212
  • Page 213 213
  • Page 214 214
  • Page 215 215
  • Page 216 216
  • Page 217 217
  • Page 218 218
  • Page 219 219
  • Page 220 220
  • Page 221 221
  • Page 222 222
  • Page 223 223
  • Page 224 224
  • Page 225 225
  • Page 226 226
  • Page 227 227
  • Page 228 228
  • Page 229 229
  • Page 230 230
  • Page 231 231
  • Page 232 232
  • Page 233 233
  • Page 234 234
  • Page 235 235
  • Page 236 236
  • Page 237 237
  • Page 238 238
  • Page 239 239
  • Page 240 240

Creative MuVo_2_QSG Användarmanual

Typ
Användarmanual