Oregon Scientific OSRGR126N Användarmanual

Typ
Användarmanual

Denna manual är också lämplig för

EN
1
Remote Rain Gauge
with Outdoor Thermometer
Model: RGR126N
USER MANUAL
RGR126N_EU_COVER_R2.indd 1 2014/8/6 3:17:32 PM
EN
1
Remote Rain Gauge
with Outdoor Thermometer
Model: RGR126N
USER MANUAL
CONTENTS
Packaging contents ................................................. 2
Introduction .............................................................. 2
Overview ................................................................... 2
Front View ............................................................ 2
Rear View ............................................................ 3
LCD display ......................................................... 3
Remote sensor (THN802) ................................... 4
Rain gague (PCR800) ......................................... 5
Getting started ......................................................... 5
Main unit - batteries installation .......................... 5
Remote sensor - Insert batteries ........................ 6
Remote sensor ........................................................ 6
Sensor data transmission ................................... 6
Rain gauge ............................................................... 7
Signals ................................................................. 8
Clock ........................................................................ 8
Manually set clock ............................................... 8
Rainfall ..................................................................... 8
Rainfall history .................................................... 8
Total rainfall ....... ...................................................9
Rainfall alert ..........................................................9
Temperature ............................................................. 9
Reset ....................................................................... 9
Precautions ............................................................ 10
Specifications ........................................................ 10
About Oregon Scientific .........................................11
EU - Declaration of Conformity ............................. 11
FCC Statement .........................................................11
Declaration of Conformity ......................................12
EN
2
3
PACKAGING CONTENTS
Main Unit Rain Gauge
Thermo Sensor Thermo Sensor Table Stand
INTRODUCTION
Thanks for purchasing the Oregon Scientific
TM
Remote
Rain Gauge with Outdoor Thermometer (RGR126N).
NOTE
Please keep this manual handy as you use
your new product. It contains practical step-by-step
instructions, as well as technical specifications and
warnings you should know about.
OVERVIEW
FRONT VIEW
1. Four-line LCD display: for displaying the total
rainfall, current rainfall or rainfall history, indoor/
outdoor temperature and clock/calendar.
2. UP: increase setting values; press and hold for
rapid increase;
3. HIST: toggle between rainfall history and daily rainfall
4. SINCE: press to review the date when the
measurement started. Press and hold to clear the
previous rainfall start time and reset the rainfall
counter to start again.
1
2
3
4
5
6
7
8
2
EN
3
OVERVIEW
FRONT VIEW
1. Four-line LCD display: for displaying the total
rainfall, current rainfall or rainfall history, indoor/
outdoor temperature and clock/calendar.
2. UP: increase setting values; press and hold for
rapid increase;
3. HIST: toggle between rainfall history and daily rainfall
4. SINCE: press to review the date when the
measurement started. Press and hold to clear the
previous rainfall start time and reset the rainfall
counter to start again.
5. DOWN: decrease setting values: press and hold
for rapid decrease
6. SEARCH: press and hold to enforce a search for
the rain gauge and remote thermo sensor
7. MODE: change setting/clock display
8. Removable table stand: for securing the main unit
on a at surface
REAR VIEW
1. Antenna: receives radio signal from rain gauge
and remote thermo sensor
2. Wall mount hole
3. RAIN ALERT: an alert for excessive rain
In/mm: inch/millimeter (rain rate unit)
˚C/˚F: temperature unit
4. Battery compartment
5. RESET: reset the unit to default settings
LCD DISPLAY
1. TODAY: today’s rainfall indicator
2. Indicates on which previous day (1-9) is the displayed
data recorded
1
2
3 5
4
1
11
12
13
14
15
16
17
2
3
4
5
6
7
8
9
10
EN
4
5
3. Rainfall alert indicator
4. : remote rain gauge sensor battery low
5. : rain gauge RF reception status
6. TOTAL: rainfall indicator
7. : outdoor thermo RF reception status
8. : outdoor remote sensor battery low
9. AM/PM
10. : main unit battery low
11. mm/in: millimeter/inch (rain rate unit)
12. Today’s rainfall
13. mm/in: millimeter/inch (rain rate unit)
14. Total rainfall
15. Outdoor temperature
16. SINCE: start date of the accumulated rainfall Yr: year
17. Time display; M:D (month: day); D:M (day: month);
calendar
REMOTE SENSOR (THN802)
1. LED status indicator
2. Wall mount hole
3. RESET hole
4. CHANNEL switch (1,2,3)
5. Battery compartment
RAIN GAGUE (PCR800)
1. Rain gauge
2. Battery compartment
3. RESET button
1. Funnel
2. Indicator
1
2
3
4
5
4
EN
5
RAIN GAGUE (PCR800)
1. Rain gauge
2. Battery compartment
3. RESET button
1. Funnel
2. Indicator
GETTING STARTED
Position the main unit, rain gauge, and thermo sensor
within effective range:
Rain gauge – 100 meters/329 feet
Thermo sensor – 100 meters/329 feet
IMPORTANT
It is recommended that you follow the
sequence below while setting up the units:
1. Set up the main unit.
2. Set up the rain gauge, then press and hold SEARCH
on the main unit and wait until you receive a signal.
3. Set up the thermo sensor, then press and hold
SEARCH on the main unit and wait until you receive
a signal.
4. In the event that you do not obtain a signal from a
remote unit please repeat the process above.
MAIN UNIT - BATTERIES INSTALLATION
1
2
3
1
2
3
1
2
EN
6
7
1. Insert the batteries, matching the polarity (+/-) as
shown in the battery compartment.
2. Press RESET, or press and hold SEARCH on the
main unit to initiate operation. The reception icons
( and ) on the main unit will blink while it is
searching for the sensor or rain gauge.
NOTE
The main unit returns to default settings in each
battery replacement.
REMOTE SENSOR - INSERT BATTERIES
1. Remove the battery compartment cover by screw driver.
2. Insert the batteries, matching the polarities (+/-).
3. Press RESET after each battery change.
LOCATION
MEANING
Rainfall area
Rain collector sensor
batteries low
Outdoor temperature area Outdoor sensor batteries low
Clock area Main unit batteries low
NOTE
Use alkaline batteries for longer usage and consumer
grade lithium batteries in temperatures below freezing.
REMOTE SENSOR
The main unit can collect data from up to two (2) sensors,
including one rain gauge and one outdoor thermo sensor.
To set up the sensor:
1. Open the battery compartment.
2. Select a channel then press RESET.
3. Close the battery compartment cover.
4. Place the sensor within 100 m (329 ft) of the main
unit using the table stand or wall mount.
TIP
For accurate readings, ideal
placements for the sensor would
be in any location on the exterior
of the home at a height of no
more than 1.5 m (5 ft); and can
shielded it from direct sunlight or
wet conditions.
SENSOR DATA TRANSMISSION
To search for a sensor:
Press and hold SEARCH.
The sensor reception icon in the remote sensor
area shows the status (see below).
ICON DESCRIPTION
Main unit is searching for
sensor(s).
A channel has been found.
The sensor cannot be found.
The transmission range may vary depending on
many factors. You may need to place the sensor(s) in
different locations to get the best result.
RAIN GAUGE
The rain gauge collects rain and takes readings of rainfall
rate and the total rainfall over a period of time. The sensor
can remotely transmit data to the main unit.
The main unit and rain gauge should be positioned
within an effective range: about 100 m (329 ft) in an
open area.
The rain gauge should be mounted horizontally about
one meter (three feet) from the ground in an open area
away from tress or other obstructions to allow rain to fall
naturally for an accurate reading.
150cm(5ft)
6
EN
7
Use alkaline batteries for longer usage and consumer
grade lithium batteries in temperatures below freezing.
REMOTE SENSOR
The main unit can collect data from up to two (2) sensors,
including one rain gauge and one outdoor thermo sensor.
To set up the sensor:
1. Open the battery compartment.
2. Select a channel then press RESET.
3. Close the battery compartment cover.
4. Place the sensor within 100 m (329 ft) of the main
unit using the table stand or wall mount.
For accurate readings, ideal
placements for the sensor would
be in any location on the exterior
of the home at a height of no
more than 1.5 m (5 ft); and can
shielded it from direct sunlight or
wet conditions.
SENSOR DATA TRANSMISSION
To search for a sensor:
Press and hold SEARCH.
The sensor reception icon in the remote sensor
area shows the status (see below).
ICON DESCRIPTION
Main unit is searching for
sensor(s).
A channel has been found.
The sensor cannot be found.
TIP
The transmission range may vary depending on
many factors. You may need to place the sensor(s) in
different locations to get the best result.
RAIN GAUGE
The rain gauge collects rain and takes readings of rainfall
rate and the total rainfall over a period of time. The sensor
can remotely transmit data to the main unit.
The main unit and rain gauge should be positioned
within an effective range: about 100 m (329 ft) in an
open area.
The rain gauge should be mounted horizontally about
one meter (three feet) from the ground in an open area
away from tress or other obstructions to allow rain to fall
naturally for an accurate reading.
To set up a rain gauge:
1. Remove screws and slide the cover off in an
upwards motion,
2. Insert the batteries (2 x UM-3/AA), matching
the polarities (+/-). Press RESET after each
battery change.
3. Remove the ber tape.
To ensure a level plane:
Put a few drops of water on the cross at the base of the
funnel to check the horizontal level.
Water will pool to the center of the cross when the rain
gauge is level.
If water remains on 1-4, the gauge is not horizontal.
If necessary, adjust the level using the screw.
1
23
4
3
2
1
EN
8
9
NOTE
For best results, ensure the base is horizontal to
allow maximum drainage of any collected rain.
SIGNALS
To search for the rain collector:
Press and hold SEARCH.
The remote rain collector reception indicator in the rainfall
area shows the status:
ICON DESCRIPTION
No signal.
Searching for
signal.
Signal connected.
TIP
The transmission range may vary depending on
many factors. You may need to place the sensor(s) in
different locations to get the best result.
CLOCK
MANUALLY SET CLOCK
1. Press and hold MODE.
2. Press UP or DOWN to change the settings.
3. Press MODE to conrm.
4. The settings order is: 12/24 hr format, hour, minute,
year, calendar mode (day-month/month-day),
month, day and language.
NOTE
The language options are English (E),
German (D), French (F), Italian (I), and Spanish (S).
To select display mode:
Press MODE to choose between clock with
seconds/weekday/calendar.
RAINFALL
Today’s rainfall appears on the first line of the display.
Press in/mm to toggle between inches and millimeters.
RAINFALL HISTORY
The rainfall history is displayed on the first row of the
display. The main unit can record and store up to nine
days of rainfall.
To display the record for a particular day:
Press HIST to toggle
between daily rainfall
and rainfall history over
the past nine days. The
day of the record will be
displayed with a minus
(-) sign at the top left
hand corner. TODAY
means the record is for
the current day.
Other sensors using the 433 MHz transmission
frequency may influence the rainfall reading. Please avoid
placing those sensors too close to the unit.
TOTAL RAINFALL
The total rainfall is displayed on the second line of
the display.
To display the commencing date of the total
rainfall record:
Press SINCE. The date when the measurement
started will appear on the bottom line of the display.
To clear the existing commencing date and reset it
to start again:
Press and hold SINCE. The total rainfall will be
reset to zero and then collect the rainfall data
starting from today.
(flash)
8
EN
9
CLOCK
MANUALLY SET CLOCK
1. Press and hold MODE.
2. Press UP or DOWN to change the settings.
3. Press MODE to conrm.
4. The settings order is: 12/24 hr format, hour, minute,
year, calendar mode (day-month/month-day),
month, day and language.
The language options are English (E),
German (D), French (F), Italian (I), and Spanish (S).
To select display mode:
Press MODE to choose between clock with
seconds/weekday/calendar.
RAINFALL
Today’s rainfall appears on the first line of the display.
Press in/mm to toggle between inches and millimeters.
RAINFALL HISTORY
The rainfall history is displayed on the first row of the
display. The main unit can record and store up to nine
days of rainfall.
To display the record for a particular day:
Press HIST to toggle
between daily rainfall
and rainfall history over
the past nine days. The
day of the record will be
displayed with a minus
(-) sign at the top left
hand corner. TODAY
means the record is for
the current day.
NOTE
Other sensors using the 433 MHz transmission
frequency may influence the rainfall reading. Please avoid
placing those sensors too close to the unit.
TOTAL RAINFALL
The total rainfall is displayed on the second line of
the display.
To display the commencing date of the total
rainfall record:
Press SINCE. The date when the measurement
started will appear on the bottom line of the display.
To clear the existing commencing date and reset it
to start again:
Press and hold SINCE. The total rainfall will be
reset to zero and then collect the rainfall data
starting from today.
RAINFALL ALERT
To set the rainfall alert value:
1. Press and hold RAIN ALERT to enter setting mode.
2. Press UP or DOWN to toggle values.
3. Press RAIN ALERT to conrm. indicates rainfall
alert function is enabled.
To deactivate rainfall alert:
The rainfall alert will be activated when the rainfall is
equal to or more than the rainfall alert value; will
ash continuously.
To deactivate the rainfall alert, press RAIN ALERT
twice and wait for 8 seconds, or increase the
rainfall alert value.
TEMPERATURE
To toggle temperature unit:
Press between ˚C / ˚F.
RESET
Press RESET to return to the default settings.
NOTE
The main unit returns to default settings in each
battery replacement.
EN
10
11
PRECAUTIONS
Do not subject the unit to excessive force, shock,
dust, temperature or humidity.
Do not cover the ventilation holes with any items
such as newspapers, curtains, etc.
Do not immerse the unit in water. If you spill liquid
over it, dry it immediately with a soft, lint-free cloth.
Do not clean the unit with abrasive or corrosive materials.
Do not tamper with the unit’s internal components.
This invalidates the warranty.
Only use fresh batteries. Do not mix new and old
batteries.
mages shown in this manual may differ from the
actual display.
When disposing of this product, ensure it is
collected separately for special treatment and not
as household waste.
Placement of this product on certain types of
wood may result in damage to its nish for which
Oregon Scientic will not be responsible. Consult
the furniture manufacturer's care instructions for
information.
The contents of this manual may not be reproduced
without the permission of the manufacturer.
Do not dispose old batteries as unsorted municipal
waste. Collection of such waste separately for
special treatment is necessary.
Please note that some units are equipped with a
battery safety strip. Remove the strip from the
battery compartment before rst use.
NOTE
The technical specifications for this product and
the contents of the user manual are subject to change
without notice.
NOTE
Features and accessories will not be available
in all countries. For more information, please contact
your local retailer.
SPECIFICATIONS
TYPE DESCRIPTION
MAIN UNIT
Dimensions
(L x W x H)
93 x 68 x 30mm
(3.66 x 2.68 x 1.18 in)
Weight
96g (3.39 ounces)
including battery
Temperature range
-5°C to 50°C
(23°F to 122°F)
Temperature resolution 0.1°C (0.2°F)
Signal frequency 433 MHz
Power
2 x UM-3(AA) 1.5V
batteries
REMOTE THERMO SENSOR (THN802)
Dimensions
(L x W x H)
96 x 50 x 22mm
(3.78 x 1.97 x 0.87 in)
Weight 62g (2.22 ounces)
RF transmission range 100 meters (329 feet)
Temperature range -30°C to 60°C
Temperature resolution 0.1°C (0.2°F)
Number of channel 3
Power
2 x UM-4 (AAA) 1.5V
batteries
REMOTE RAIN GAUGE (PCR800)
Dimensions
L x W x H
114 x 114 x 145 mm
(4.5 x 4.5 x 5.7 inches)
Weight
241 g (8.5 oz)
without battery
Transmission range 100m (329 ft) unobstructed
Power 2 x UM-3 (AA) 1.5V
ABOUT OREGON SCIENTIFIC
Visit our website www.oregonscientic.com to learn more
about Oregon Scientic products.
For any enquiry, please contact our Customer Services at
info@oregonscientic.com.
Oregon Scientic Global Distribution Limited reserves
the right to interpret and construe any contents, terms
and provisions in this user manual and to amend it, at
10
EN
11
Please note that some units are equipped with a
battery safety strip. Remove the strip from the
battery compartment before rst use.
The technical specifications for this product and
the contents of the user manual are subject to change
without notice.
Features and accessories will not be available
in all countries. For more information, please contact
your local retailer.
SPECIFICATIONS
TYPE DESCRIPTION
MAIN UNIT
Dimensions
(L x W x H)
93 x 68 x 30mm
(3.66 x 2.68 x 1.18 in)
Weight
96g (3.39 ounces)
including battery
Temperature range
-5°C to 50°C
(23°F to 122°F)
Temperature resolution 0.1°C (0.2°F)
Signal frequency 433 MHz
Power
2 x UM-3(AA) 1.5V
batteries
REMOTE THERMO SENSOR (THN802)
Dimensions
(L x W x H)
96 x 50 x 22mm
(3.78 x 1.97 x 0.87 in)
Weight 62g (2.22 ounces)
RF transmission range 100 meters (329 feet)
Temperature range -30°C to 60°C
Temperature resolution 0.1°C (0.2°F)
Number of channel 3
Power
2 x UM-4 (AAA) 1.5V
batteries
REMOTE RAIN GAUGE (PCR800)
Dimensions
L x W x H
114 x 114 x 145 mm
(4.5 x 4.5 x 5.7 inches)
Weight
241 g (8.5 oz)
without battery
Transmission range 100m (329 ft) unobstructed
Power 2 x UM-3 (AA) 1.5V
ABOUT OREGON SCIENTIFIC
Visit our website www.oregonscientic.com to learn more
about Oregon Scientic products.
For any enquiry, please contact our Customer Services at
info@oregonscientic.com.
Oregon Scientic Global Distribution Limited reserves
the right to interpret and construe any contents, terms
and provisions in this user manual and to amend it, at
its sole discretion, at any time without prior notice. To
the extent that there is any inconsistency between the
English version and any other language versions, the
English version shall prevail.
EU - DECLARATION OF CONFORMITY
Hereby, IDT Technology Limited, declares that this
Remote Rain Gauge with Outdoor Thermometer
(model: RGR126N) is in compliance with the essential
requirements and other relevant provisions of Directive
2014/53/EU. A copy of the signed and dated Declaration
of Conformity is available on request via our Oregon
Scientic Customer Service.
COUNTRIES RED APPROVAL COMPLIED
All EU countries, Switzerland CH
und Norwegen N
FCC STATEMENT
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference,
and (2) This device must accept any interference
received, including interference that may cause
undesired operation.
EN
12
WARNING
Changes or modifications not expressly
approved by the party responsible for compliance could
void the user’s authority to operate the equipment.
NOTE
This equipment has been tested and found
to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against
harmful interference in a residential installation.
This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is
no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful
interference to radio or television reception, which can
be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by
one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment
and receiver.
Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
Consult the dealer or an experienced radio / TV
technician for help.
DECLARATION OF CONFORMITY
The following information is not to be used as contact for
support or sales. Please call our customer service number
(listed on our website at www.oregonscientific.com), or on
the warranty card for this product) for all inquiries instead.
We
Name: Oregon Scientific, Inc.
Address: 10778 SW Manhasset Dr.
UNIT B-2 Tualatin, Or 97062 USA
Telephone No.: 1-800-853-8883
Declare that the product
Product No.: RGR126N
Product Name: Remote Rain Gauge with Outdoor
Thermometer
Manufacturer: IDT Technology Limited
Address: Block C, 9/F, Kaiser Estate,
Phase 1, 41 Man Yue St.,
Hung Hom, Kowloon,
Hong Kong
IT
1
Orologio con pluviometro
Modello: RGR126N
Manuale utente
INDICE
Contenuto della confezione .................................... 2
Introduzione ............................................................. 2
Panoramica .............................................................. 2
Vista Frontale ...................................................... 2
Vista Posterioree ................................................. 3
Dislay LCD ........................................................... 4
Sensore Remoto (THN802) ................................ 4
Pluviometro (PCR800) ........................................ 5
Come Iniziare ........................................................... 5
Unita’ Principale – Installazione batterie ............. 6
Sensore Remoto– Inserimento ........................... 6
Sensore Remoto ...................................................... 7
Trssmissione dati sensore ................................... 7
Pluviometro .............................................................. 7
Segnali sensori .................................................. 8
Orologio .................................................................... 9
Impostazione Manuale Orologio ......................... 9
Livello delle precipitazioni ....................................... 9
Storico precipitazioni ........................................... 9
Totale precipitazioni ........................................... 10
Allerta precipitazioni .......................................... 10
Temperatura ........................................................... 10
Reset ....................................................................... 10
Precauzioni ............................................................. 10
Speciche ............................................................... 11
Informazioni Su Oregon Scientic ....................... 12
Dichiarazione Di conformità ................................. 12
IT
2
3
CONTENUTO DELLA CONFEZIONE
Unità principale Pluviometro
Sensore remoto
Supporto per
sensore remoto
INTRODUZIONE
Grazie per aver acquistato l’orologio con pluviometro di
Oregon Scientific
TM
(RGR126N).
NOTA
Si prega di tenere questo manuale a portata di
mano, per sapere come utilizzare il prodotto. Il manuale
contiene istruzioni pratiche, specifiche tecniche e
avvertenze che è necessario conoscere.
PANORAMICA
VISTA FRONTALE
1
2
3
4
5
6
7
8
1. Schermo a cristalli liquidi su quattro righe: per
visualizzare le precipitazioni totali, precipitazioni
correnti, lo storico, la temperatura interna/esterna,
l’orologi e il calendario.
2. UP (SU): aumenta i valori di impostazione; tenere
premuto per un aumento rapido;
3. HIST (STOR): alternanza tra storico precipitazioni e
precipitazioni del giorno.
2
IT
3
PANORAMICA
VISTA FRONTALE
1. Schermo a cristalli liquidi su quattro righe: per
visualizzare le precipitazioni totali, precipitazioni
correnti, lo storico, la temperatura interna/esterna,
l’orologi e il calendario.
2. UP (SU): aumenta i valori di impostazione; tenere
premuto per un aumento rapido;
3. HIST (STOR): alternanza tra storico precipitazioni e
precipitazioni del giorno.
4. SINCE (DA): alternanza tra: premere per rivedere
la data in cui la misurazione avviato e la pioggia
annuale totale. Tenere premuto il tasto per
cancellare l’orario precedente di precipitazioni e
reimpostare a zero il contatore precipitazioni.
5. DOWN (GIÙ): diminuisce i valori di impostazione:
tenere premuto per un diminuzione rapida.
6. SEARCH (RICERCA): tenere premuto per forzare
una ricerca del pluviometro e del sensore remoto.
7. MODE (MODALITÀ): cambia visualizzazione tra
impostazioni/orologio.
8. Supporto rimovibile da tavolo: per posare l’unità
principale su una supercie piana.
VISTA POSTERIORE
1
2
3 5
4
1. Antenna: riceve il segnale radio dal pluviometro e
dal sensore remoto.
2. Foro per il montaggio a muro.
3. RAIN ALERT (ALLERTA PIOGGIA): l’allerta per
pioggia eccessiva In/mm: pollici/millimetri (unità
di misura della pioggia) ˚C / ˚F: unità di misura
della temperatura.
4. Comparto batteria.
5. RESET (REIMPOSTAZIONE): reimposta l’unità
alle impostazioni di default.
IT
4
5
DISPLAY LCD
1
11
12
13
14
15
16
17
2
3
4
5
6
7
8
9
10
MO A CRISTALLI LIQUID
1. TODAY (OGGI): indicatore della pioggia odierna
2. Indica in quale giorno precedente (1-9) sono stati
registrati dati visualizzati
3. Indicatore allerta pioggia
4. : batteria bassa del pluviometro
5. : stato ricezione in RF pluviometro
6. TOTAL (TOTALE): indicatore di pioggia
7. : stato ricezione in RF termo sensore esterno
8. : batteria bassa sensore remoto esterno
9. AM/PM (indicatore orario meridiano/pomeridiano)
10. : batteria bassa sensore remoto interno
11. mm/in: millimetri/pollici (unità di misura pioggia)
12. Pioggia odierna
13. mm/in: millimetri/pollici (unità di misura pioggia)
14. Pioggia totale
15. Temperatura esterna
16. SINCE (DA): data di inizio di rilevazione delle
precipitazioni Yr: Anno
17. Visualizzazione ora; M:D (mese : giorno); D:M
(giorno : mese); calendario
SENSORE REMOTO (THN802)
1
2
3
4
5
1. Indicatore LED
2. Foro montaggio a muro
3. RESET foro per reimpostazione
4. CHANNEL selezione canale (1,2,3)
5. Comparto batteria
PLUVIOMETRO (PCR800)
1. Pluviometro per rilevare il livello delle precipitazioni
2. Comparto batteria
3. Tasto RESET (REIMPOSTAZIONE)
1. Imbuto
2. Indicatore
4
IT
5
1. Indicatore LED
2. Foro montaggio a muro
3. RESET foro per reimpostazione
4. CHANNEL selezione canale (1,2,3)
5. Comparto batteria
PLUVIOMETRO (PCR800)
1
2
3
1. Pluviometro per rilevare il livello delle precipitazioni
2. Comparto batteria
3. Tasto RESET (REIMPOSTAZIONE)
1
2
1. Imbuto
2. Indicatore
COME INIZIARE
Posizionare l’uni principale, ed il sensore termico
entro :
Misuratore di pioggia – 100 metri / 329 piedi
Sensore termico – 100 metri / 329 piedi
IMPORTANTE
Si raccomanda di seguire la sequenza
sottostante mentre impostate le unità:
1. Impostate l’unità principale.
2. Impostate il pluviometro, quindi tenete premuto il
tasto SEARCH (RICERCA) sull’unità principale ed
attendete no a che ricevete il segnale.
3. Impostate il sensore remoto, quindi tenete premuto
il tasto SEARCH (RICERCA) sull’unità principale
ed attendete no a che ricevete il segnale.
4. Se non ricevete un segnale da un’unità remota,
ripetere il processo precedente.
IT
6
7
UNITA’ PRINCIPALE – INSTALLAZIONE
BATERIE
1
2
3
1. Inserite le batterie, abbinando correttamente la
polarità (+/-) come indicato nel comparto batteria.
2. Premete RESET (REIMPOSTAZIONE), o tenete
premuto SEARCH (RICERCA) sull’unità principale
per avviare il funzionamento. Le icone di ricezione
( e ) sull’unità principale lampeggeranno
mentre sta cercando il sensore o il pluviometro.
NOTA
Lunità principale torna alle impostazioni
predefinite a ogni sostituzione della batteria.
SENSORE REMOTO– INSERIMENTO
BATTERIE
1. Rimuovete il coperchio del comparto batteria con
un cacciavite.
2. Inserire le batterie rispettando le polarità.
3. Premete RESET dopo ogni sostituzione di batteria.
POSIZIONE
SIGNIFICATO
Area pioggia Batterie basse pluviometro
Area temperatura
esterna
Batterie basse sensore
esterno
Area orologio
Batterie basse unità
principale
NOTA
Usate batterie alcaline per un funzionamento più
lungo e batterie al litio in condizioni temperature rigide.
SENSORE REMOTO
L’unità principale può raccogliere dati da no a due
(2) sensori, includendo un pluviometro e un sensore
remoto.
Per impostare il sensore:
1. Aprite il comparto batteria.
2. Selezionate un canale quindi premete RESET.
3. Chiudete il coperchio del comparto batteria.
4. Collocate il sensore entro 100 m (329 piedi)
dall’unità principale usando il supporto da tavolo od
il supporto a parete.
Per delle
letture accurate, i posizionamenti
ideali per il sensore sarebbero in
qualsiasi posizione all’esterno
della casa ad un’altezza di non
più di 1,5 m (5 piedi); e p
essere posto al riparo dalla luce
solare diretta o da condizioni
di umidità.
TRSSMISSIONE DATI SENSORE
Per ricercare un sensore:
Tenere premuto SEARCH.
L'icona di ricezione del sensore nell'area del
sensore remoto mostra lo stato (vedere sotto).
6
IT
7
SENSORE REMOTO– INSERIMENTO
BATTERIE
1. Rimuovete il coperchio del comparto batteria con
un cacciavite.
2. Inserire le batterie rispettando le polarità.
3. Premete RESET dopo ogni sostituzione di batteria.
POSIZIONE
SIGNIFICATO
Area pioggia Batterie basse pluviometro
Area temperatura
esterna
Batterie basse sensore
esterno
Area orologio
Batterie basse unità
principale
Usate batterie alcaline per un funzionamento più
lungo e batterie al litio in condizioni temperature rigide.
SENSORE REMOTO
L’unità principale può raccogliere dati da no a due
(2) sensori, includendo un pluviometro e un sensore
remoto.
Per impostare il sensore:
1. Aprite il comparto batteria.
2. Selezionate un canale quindi premete RESET.
3. Chiudete il coperchio del comparto batteria.
4. Collocate il sensore entro 100 m (329 piedi)
dall’unità principale usando il supporto da tavolo od
il supporto a parete.
SUGGERIMENTO
Per delle
letture accurate, i posizionamenti
ideali per il sensore sarebbero in
qualsiasi posizione all’esterno
della casa ad un’altezza di non
più di 1,5 m (5 piedi); e p
essere posto al riparo dalla luce
solare diretta o da condizioni
di umidità.
TRSSMISSIONE DATI SENSORE
Per ricercare un sensore:
Tenere premuto SEARCH.
L'icona di ricezione del sensore nell'area del
sensore remoto mostra lo stato (vedere sotto).
ICONA DESCRIZIONE
L’unità sta cercando i(l)
sensore(i).
E’ stato trovato un canale.
Il sensore non può essere
trovato.
SUGGERIMENTO
Il raggio di trasmissione può variare
in base a molti fattori. Potreste dover posizionare
i(l)sensore/i in diverse locazioni per ottenere i
migliori risultati.
PLUVIOMETRO
Il pluviometro misura il livello delle precipitazioni,
indicando il tasso di caduta totale, corrente e per un
determinato periodo di tempo. Il sensore può trasmettere
in remoto i dati all’unità principale.
L’unità principale e il pluviometro dovrebbero essere
posizionati entro un raggio efficace: circa 100 m (329
piedi) in un’area aperta.
Il pluviometro dovrebbe essere montato orizzontalmente
a circa un metro (tre piedi) dal suolo in un’area aperta
lontana da alberi o altre istruzioni per permettere
alla pioggia di cadere naturalmente per una lettura
accurata.
150cm(5ft)
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120

Oregon Scientific OSRGR126N Användarmanual

Typ
Användarmanual
Denna manual är också lämplig för