Yamaha CDX-396 Användarmanual

Stämpla: Yamaha

Modell: CDX-396

Kategori: CD-spelare

Typ: Användarmanual

Denna manual är också lämplig för

Compact Disc Player

Lecteur Compact Disque

X-

596

96/396

OWNER’S MANUAL

MODE D’EMPLOI

U C A

• Explanation of Graphical Symbols

The lightning flash with arrowhead

symbol, within an equilateral triangle,

is intended to alert you to the

presence of uninsulated “dangerous

voltage” within the product’s

enclosure that may be of sufficient

magnitude to constitute a risk of

electric shock to persons.

The exclamation point within an

equilateral triangle is intended to alert

you to the presence of important

operating and maintenance

(servicing) instructions in the

literature accompanying the

appliance.

SAFETY INSTRUCTIONS

1 Read Instructions – All the safety and operating

instructions should be read before the unit is operated.

2 Retain Instructions – The safety and operating

instructions should be retained for future reference.

3 Heed Warnings – All warnings on the unit and in the

operating instructions should be adhered to.

4 Follow Instructions – All operating and other

instructions should be followed.

5 Water and Moisture – The unit should not be used near

water – for example, near a bathtub, washbowl, kitchen

sink, laundry tub, in a wet basement, or near a

swimming pool, etc.

6 Carts and Stands – The unit should be used only with

a cart or stand that is recommended by the

manufacturer.

6A A unit and cart combination should be

moved with care. Quick stops, excessive

force, and uneven surfaces may cause

the unit and cart combination to overturn.

7 Wall or Ceiling Mounting – The unit should be mounted

to a wall or ceiling only as recommended by the

manufacturer.

8 Ventilation – The unit should be situated so that its

location or position does not interfere with its proper

ventilation. For example, the unit should not be

situated on a bed, sofa, rug, or similar surface, that

may block the ventilation openings; or placed in a built-

in installation, such as a bookcase or cabinet that may

impede the flow of air through the ventilation openings.

9 Heat – The unit should be situated away from heat

sources such as radiators, stoves, or other appliances

that produce heat.

10 Power Sources – The unit should be connected to a

power supply only of the type described in the

operating instructions or as marked on the unit.

11 Power-Cord Protection – Power-supply cords should

be routed so that they are not likely to be walked on or

pinched by items placed upon or against them, paying

particular attention to cords at plugs, convenience

receptacles, and the point where they exit from the

unit.

12 Cleaning – The unit should be cleaned only as

recommended by the manufacturer.

13 Nonuse Periods – The power cord of the unit should be

unplugged from the outlet when left unused for a long

period of time.

14 Object and Liquid Entry – Care should be taken so that

objects do not fall into and liquids are not spilled into

the inside of the unit.

15 Damage Requiring Service – The unit should be

serviced by qualified service personnel when:

A. The power-supply cord or the plug has been

damaged; or

B. Objects have fallen, or liquid has been spilled into

the unit; or

C. The unit has been exposed to rain; or

D. The unit does not appear to operate normally or

exhibits a marked change in performance; or

E. The unit has been dropped, or the cabinet

damaged.

16 Servicing – The user should not attempt to service the

unit beyond those means described in the operating

instructions. All other servicing should be referred to

qualified service personnel.

17 Power Lines – An outdoor antenna should be located

away from power lines.

18 Grounding or Polarization – Precautions should be

taken so that the grounding or polarization is not

defeated.

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC

SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN

OR MOISTURE.

CAUTION

CAUTION: TO REDUCE THE RISK OF

ELECTRIC SHOCK, DO NOT REMOVE

COVER (OR BACK). NO USER-SERVICEABLE

PARTS INSIDE. REFER SERVICING TO

QUALIFIED SERVICE PERSONNEL.

IMPORTANT

Please record the serial number of this system in the

space below.

Model:

Serial No.:

The serial number is located on the rear of the main

unit.

Retain this Owner’s Manual in a safe place for future

reference.

RISK OF ELECTRIC SHOCK

DO NOT OPEN

We Want You Listening For A Lifetime

YAMAHA and the Electronic Industries Association’s

Consumer Electronics Group want you to get the most out

of your equipment by playing it at a safe level. One that lets

the sound come through loud and clear without annoying

blaring or distortion – and, most importantly, without

affecting your sensitive hearing.

Since hearing damage from loud sounds is

often undetectable until it is too late, YAMAHA

and the Electronic Industries Association’s

Consumer Electronics Group recommend you

to avoid prolonged exposure from excessive

volume levels.

FCC INFORMATION (for US customers only)

1. IMPORTANT NOTICE : DO NOT MODIFY THIS

UNIT!

This product, when installed as indicated in the

instructions contained in this manual, meets FCC

requirements. Modifications not expressly approved

by Yamaha may void your authority, granted by the

FCC, to use the product.

2. IMPORTANT : When connecting this product to

accessories and/or another product use only high

quality shielded cables. Cable/s supplied with this

product MUST be used. Follow all installation

instructions. Failure to follow instructions could void

your FCC authorization to use this product in the

USA.

3. NOTE : This product has been tested and found to

comply with the requirements listed in FCC

Regulations, Part 15 for Class “B” digital devices.

Compliance with these requirements provides a

reasonable level of assurance that your use of this

product in a residential environment will not result in

harmful interference with other electronic devices.

This equipment generates/uses radio frequencies

and, if not installed and used according to the

instructions found in the users manual, may cause

interference harmful to the operation of other

electronic devices.

Compliance with FCC regulations does not guarantee that

interference will not occur in all installations. If this

product is found to be the source of interference, which

can be determined by turning the unit “OFF” and “ON”,

please try to eliminate the problem by using one of the

following measures:

Relocate either this product or the device that is being

affected by the interference.

Utilize power outlets that are on different branch (circuit

breaker or fuse) circuits or install AC line filter/s.

In the case of radio or TV interference, relocate/reorient

the antenna. If the antenna lead-in is 300 ohm ribbon

lead, change the lead-in to coaxial type cable.

If these corrective measures do not produce satisfactory

results, please contact the local retailer authorized to

distribute this type of product. If you can not locate the

appropriate retailer, please contact Yamaha Electronics

Corp., U.S.A. 6660 Orangethorpe Ave, Buena Park, CA

90620.

The above statements apply ONLY to those products

distributed by Yamaha Corporation of America or its

subsidiaries.

CAUTION............................................1

NOTES ABOUT DISCS ...................... 2

FEATURES .........................................3

UNPACKING....................................... 3

NOTES ABOUT THE REMOTE

CONTROL .......................................... 4

CONNECTIONS................................. 5

IDENTIFICATION OF COMPONENTS

............................................................ 6

BASIC OPERATION .......................... 8

To pause play .................................. 9

To stop play ..................................... 9

To turn off the power........................ 9

To play directly from the desired track

..........................................................9

To skip to the beginning of the desired

track (SKIP SEARCH) ................... 10

To advance or reverse play rapidly

(MANUAL SEARCH) ..................... 10

Other useful functions.................... 11

RANDOM-SEQUENCE PLAY ......... 13

REPEAT PLAY................................. 13

PROGRAM PLAY ............................ 14

INDEX SEARCH .............................. 15

TRACK PROGRAMMING FOR

RECORDING TO TAPE ................... 16

Automatic tape-programming ........ 16

Manual tape-programming ............ 18

Random sequential tape-

programming ................................. 19

Automatic searching for the peak

level on a disc................................ 20

CD SYNCHRONIZED RECORDING

..........................................................21

TROUBLESHOOTING..................... 22

SPECIFICATIONS ........................... 23

CONTENTS

English

E-1

● The voltage to be used must be the same as that

specified on this unit. Using this unit with a higher voltage

than that which is specified is dangerous and may result

in a fire or other type of accident causing damage.

YAMAHA will not be held responsible for any damage

resulting from use of this unit with a voltage other than

that which is specified.

● Sudden temperature changes and storage or operation in

an extremely humid environment may cause

condensation inside the cabinet.

CAUTION FOR MOVING THE UNIT

Before moving the unit, first remove the disc from the

unit, press POWER to turn the unit off, and then

disconnect the AC power plug from the wall outlet.

CAUTION

Use of controls or adjustments or performance of

procedures other than those specified herein may result

in hazardous radiation exposure.

As the laser beam used in this compact disc player is

harmful to the eyes, do not attempt to disassemble the

cabinet. Refer servicing to qualified personnel only.

For Canadian Customers

To prevent electric shock, match wide blade of plug to

wide slot and fully insert.

This Class B digital apparatus complies with Canadian

ICES-003.

● To assure the finest performance, please read this

manual carefully. Keep it in a safe place for future

reference.

● Install your unit in a well ventilated, cool, dry, clean place

— away from windows, heat sources, vibration, dust,

moisture, or cold. To avoid humming sounds, locate the

unit away from other electrical appliances, motors, and

transformers. To prevent fire or electrical shock, do not

expose to rain and water.

● Be sure to allow enough spaces for ventilation at the top,

on left, right, and back sides of this unit.

● Do not operate the unit upside-down. It may overheat,

possibly causing damage.

● Never open the cabinet. If something drops into the set,

contact your dealer.

● Do not use force on switches, knobs or cords.

● When not planning to use this unit for long periods of time

(i.e., vacation, etc.), disconnect the AC power plug from

the wall outlet.

● Grounding or polarization — Precautions should be taken

so that the grounding or polarization of the unit is not

defeated.

● Do not clean the unit with chemical solvents; this might

damage the finish. Use a clean, dry cloth.

● Be sure to read the “Troubleshooting” section on common

operating errors before concluding that your unit is faulty.

● Do not place another component on top of this unit, as

damage or discoloration on the surface of the unit may

result.

● To prevent damage by lightning, disconnect the power

cord from the wall outlet during an electrical storm.

● When disconnecting the power cord from the wall outlet,

grasp the plug; do not pull the cord.

● Do not plug the AC power plug to the wall outlet before

you finish all connections.

CAUTION: Read this before operating your unit.

E-2

NOTES ABOUT DISCS

Discs playable with this unit

This compact disc player is designed only for playing

compact discs bearing the marks shown below. Never

attempt to load any other type of disc into the unit. The unit

will also play 8-cm (3-inch) compact discs.

.... Compact discs (digital audio)

The most popular discs for commercially

available audio CDs.

.... CD-RW (ReWritable) digital audio

discs

The discs repeatedly recordable by using

CD recorders for audio recording.

Recorded CD-RW discs can be played

only with CD players which have the

ability to play CD-RW discs.

Notes

● Be sure to use a CD-RW disc made by

a reliable manufacture.

● Be sure to use a CD-RW disc which

has at least one of the following

phrases on the disc or disc case.

FOR CONSUMER

FOR CONSUMER USE

FOR MUSIC USE ONLY

.... CD-TEXT discs

The discs recorded with text data such as

album titles, track titles and artist names.

These discs can be played with ordinary

CD players, however, the text data can be

displayed only with CD players which

have the ability to display such data.

CDX-596 can display text data

recorded on CD-TEXT discs.

Note

This compact disc player may not be able to play some

CD-RW discs or discs on which recording was not made

correctly.

To prevent a malfunction of this unit:

● Do not use any nonstandard shaped

disc (heart etc.) available on the

market because it might damage the

unit.

● Do not use a disc with tape, seals, or paste on it. If

you use such a disc, a disc may get stuck in the unit,

or damage to the unit may result.

Notes about handling compact discs

● Always handle the disc with care so that its surface is not

scratched.

● Compact discs are not subjected to wear during play, but

damage to the disc surface when the disc is being

handled can adversely affect the disc’s play.

● Be sure to use a felt-tip pen or similar writing tool when

writing on the label side of the disc. Do not use a ball-

point pen, pencil, or other hard-tipped writing tool, as

these may damage the disc and may adversely affect the

disc’s play.

● Do not warp discs.

● When a disc is not currently being used, remove it from

the unit and store in an appropriate case.

● When removing or storing a disc, be careful not to

scratch the playing surface.

● Compact discs are not affected by small particles of dust

or fingerprints on their playing surface, but even so they

should be kept clean. Wipe by using a clean, dry cloth.

Do not wipe with a circular motion; wipe straight outward

from the center.

● Do not try to clean the disc’s surface by using any type of

disc cleaner, record spray, anti-static spray or liquid, or

any other chemical-based liquid because such

substances might irreparably damage the disc’s surface.

● Do not expose discs to direct sunlight, high temperature

or high humidity for a long period of time because these

might warp or otherwise damage the disc.

No!

To play an 8-cm (3-inch) CD

Place it in the inner recessed area of the disc tray. Do not

put a normal (12-cm/5-inch) CD on top of an 8-cm CD.

English

E-3

Thank you for selecting this YAMAHA compact disc player.

FEATURES

v CD-RW (ReWritable) Disc Playability

* Refer to page 2 for details.

v Program Play

v Random-Sequence Play

v Single Track/Entire Disc Repeat Play

v Automatic Spacing Function

v Track Programming Function Useful for

Recording Tracks Fitted onto Any Length

of Tape

v Automatic Peak Level Search Function

v CD Synchronized Recording

v Adjustable Display Brightness

v Remote Control Capability

v Optical Digital Output

CDX-596 only

v Coaxial Digital Output

v CD-TEXT Data Display Capability

UNPACKING

Remote control RCA pin cable

Battery (size AA, R6, UM-3) x 2

OPEN/

DIMMERSYNCHRO

PEAK

TEXT/

TIME

SPACE

PROGCLEAR

TAPE

RANDOM

REPEAT

INDEX

OUTPUT LEVEL

+–

Carefully remove this unit and accessories from the box. You should find the unit itself and the following accessories.

CDX-596 CDX-496 CDX-396

OPEN/

DIMMERSYNCHRO

PEAK

TIME

SPACE

PROGCLEAR

TAPE

RANDOM

REPEAT

INDEX

OUTPUT LEVEL

+–

OPEN/

DIMMERSYNCHRO

PEAK

TIME

SPACE

PROGCLEAR

TAPE

RANDOM

REPEAT

INDEX

E-4

NOTES ABOUT THE REMOTE CONTROL

Battery installation

1. Turn the remote control over and remove the battery

compartment cover by sliding it in the direction of the

arrow.

2. Insert the batteries (AA, R6, UM-3 type) according to the

polarity markings on the inside of the battery

compartment.

3. Close the battery compartment cover.

Battery replacement

If you notice that the remote control must be used closer to

the main unit, the batteries are weak. Replace both

batteries with new ones.

Notes

● Use only AA, R6, UM-3 batteries for replacement.

● Be sure the polarities are correct. (See the illustration inside

the battery compartment.)

● Remove the batteries if the remote control will not be used for

an extended period of time.

● If batteries leak, dispose of them immediately. Avoid touching

the leaked material or letting it come in contact with clothing,

etc. Clean the battery compartment thoroughly before

installing new batteries.

Remote control operation range

Notes

● There should be no large obstacles between the remote control

and the main unit.

● If the remote control sensor is directly illuminated by strong

lighting (especially an inverter type fluorescent lamp etc.), the

remote control might not work properly. In this case,

reposition the main unit to avoid direct lighting.

CDX-396CDX-596, CDX-496

30°

Remote control

sensor

Within approximately

6 m (19.7 feet)

English

E-5

CONNECTIONS

● Before making any connection, switch OFF the power to

the unit and the amplifier or other component.

● Connections should be made to the correct input

terminals of the amplifier or another component.

● If the placement of this unit causes noise to another

equipment, such as a tuner, separate them from each

other.

When the LINE OUT (analog) terminals of

this unit are used ( 1 )

Connect these terminals to the “CD” (or “AUX”) terminals of

the amplifier. For additional details concerning these

connections, refer to the operation instructions of the

amplifier being used.

* Be sure that the left (“L”) and right (“R”) of these terminals are

connected to the corresponding (left and right) terminals of the

amplifier or another component.

When the DIGITAL AUDIO OUT (OPTICAL)

terminal of this unit is used ( 2 )

● Before using this terminal, pull out the terminal’s cover.

● Make the connection from this terminal to the optical

input terminal of an amplifier by using a commercially

available optical fiber cable.

* Use an optical fiber cable that conforms to EIAJ

standards. Other cables might not function correctly.

● Be sure to attach the terminal’s cover when this terminal

is not being used, in order to protect the terminal from

dust.

● This terminal can also be connected to the optical input

terminal of an MD recorder etc. to record CD onto MD

directly.

When the DIGITAL AUDIO OUT (COAXIAL)

terminal of this unit is used ( 3 )

CDX-596 only

Make the connection from this terminal to the digital input

terminal of an amplifier by using a connection cable.

To connect this unit to your amplifier, choose one of the ways listed below.

CD DIGITAL IN

OPTICAL

COAXIAL

LINE OUT DIGITAL AUDIO OUT

OPTICAL COAXIAL

RCA pin cable

(included)

Optical fiber cable

(not included)

Connection cable

(For CDX-596 only; not included)

Amplifier

To AC outlet

The shaded part ( ) is provided for CDX-596 only.

CDX-596 and CDX-496 only

●

The level of signals output from any of these terminals

into an amplifier can be adjusted by using the

–

OUTPUT LEVEL

buttons.

●

When using the DIGITAL AUDIO OUT (OPTICAL or

COAXIAL) terminal, set the level of signals output into

an amplifier to max. by using the

–

OUTPUT LEVEL

buttons.

E-6

FRONT PANEL

● The control functions on the main unit and on the remote

control are virtually identical, with the exceptions below.

IDENTIFICATION OF COMPONENTS

( ) indicates the page number on which the controls are best described.

NATURAL SOUND COMPACT DISC PLAYER

AUTO

DISPLAY OFF

POWER

1 2 3 4 5 6 7 8 9 0

SKIP/SEARCH

OUTPUT LEVEL

PHONES

OPEN/CLOSE

NATURAL SOUND COMPACT DISC PLAYER

OPEN/CLOSE

POWER

1 2 3 4 5 6 7 8 9 0 SKIP/SEARCH

CDX-396

● / (play/pause) on the main unit has both the

functions of (play) and (pause) on the remote

control.

● SKIP/SEARCH on the main unit has both the

functions of / (skip) and / (search) on

the remote control.

CDX-596, CDX-496

POWER (p. 8)

AUTO DISPLAY OFF indicator CDX-596 only (p. 12)

Display panel

Disc tray (p. 8)

Remote control sensor (p. 4)

PHONES jack (p. 12)

POWER (p. 8)

Remote control sensor (p. 4)

Display panel

Disc tray (p. 8)

The shaded part ( ) is provided for CDX-596 only.

English

E-7

( ) indicates the page number on which the controls are best described.

OPEN/

DIMMERSYNCHRO

PEAK

SPACE

PROGCLEAR

TAPE

RANDOM

REPEAT

INDEX

OUTPUT LEVEL

+–

TEXT/

TIME

CDX-596

CDX-496, 396

DIMMER (p. 12)

SYNCHRO (p. 21)

SPACE (p. 12)

TAPE (p. 16)

Numeric buttons (p. 9)

REPEAT (p. 13)

RANDOM (p. 13)

CDX-596 and CDX-496 only

OUTPUT LEVEL (p. 12)

INDEX (p. 15)

CLEAR (p. 15)

PROG (p. 14)

PEAK (p. 20)

OPEN/CLOSE (p. 8)

“pause” (p. 9)

/ “skip” (p. 10)

“stop” (p. 9)

/ “search” (p. 10)

“play” (p. 8)

TEXT/TIME (p. 11)

TIME (p. 11)

The shaded parts ( ) vary between models.

REMOTE CONTROL

E-8

BASIC OPERATION

This manual describes how to operate this unit by using the remote control.

To operate this unit from the front panel, use the corresponding buttons on the front panel.

1 Press POWER to turn on the power.

2 Press OPEN/CLOSE to open the disc tray, and load

a disc.

3 Press OPEN/CLOSE to close the disc tray.

4 Press (or ) to begin play.

Play will begin from the first track of the disc.

Display information

CDX-596

CDX-496, CDX-396

NATURAL SOUND COMPACT DISC PLAYER

POWER

OPEN/

DIMMERSYNCHRO

PEAK

SPACE

PROGCLEAR

TAPE

RANDOM

REPEAT

2, 3

POWER

OPEN/

1 Shows the track number selected or being played.

2 Displays the numbers that correspond to the numbers

of tracks (as high as number 20) on the disc. After each

track is played, its corresponding number disappears so

the number of remaining tracks (and their numbers) can

be seen at a glance.

3 CDX-596 and CDX-496

only

Shows the level of signals output into an amplifier or the

headphone level adjusted by pressing

–

OUTPUT

LEVEL

4 Shows the time displays. (Refer to “Changing displays”

on page 11.)

143

123

11 12

345678910

Label side up.

Disc tray

English

E-9

Notes

● After closing the disc tray by pressing OPEN/CLOSE, the

display shows the total number of tracks and the total recorded

time of the disc for a few seconds.

CDX-596

CDX-496, CDX-396

Example: To select track 25

Press +10 twice, then immediately press 5 once.

* If a track number higher than the highest track number on the

disc is selected, the last track on the disc will be played.

To pause play

Press .

To resume play, press again (or press ).

* on the front panel can also be used to stop play

temporarily or to resume play.

● Additionally, you can close the disc tray by pressing

( ), a numeric button or RANDOM, or by pressing the

front edge of the disc tray gently. If the tray is closed in one of

these ways, play will begin automatically; however, the display

will not show the total number of tracks nor the total recorded

time of the disc.

● CDX-596 only

If you load a CD-TEXT disc, the display also shows the disc

title after showing the total number of tracks and the total

recorded time of the disc.

To turn off the power

Press POWER again.

* If you turn on the power again with a disc still on the tray, the

disc starts playing automatically from the first track.

To play directly from the desired track

Select a desired track by using the numeric buttons.

To select track number 10 or higher

Press +10 to select the first digit and then press a numeric

button (1–0) to select the second digit.

345678910

TOTAL

Gear wheel

Caution

When the disc tray is open, do not touch the inside gear

wheel. If you touch the gear wheel, your finger may be

caught in the closing tray and injured.

CDX-596

CDX-496, CDX-396

The selected track

number is displayed

To stop play

Press .

E-10

To advance rapidly

(Press and hold.)

To reverse rapidly

(Press and hold.)

To advance or reverse play rapidly (MANUAL SEARCH)

● The sound can be heard (although slightly garbled)

during manual search in either direction. This is

convenient for locating a precise position within a track, or

for reviewing the contents quickly.

● Manual search can also be performed while disc play is

paused, though no sound will be heard.

● When using SKIP/SEARCH on the front

panel:

Be careful not to release the button just after it is

pressed, otherwise the play is skipped to the beginning

of the next track or returned to the beginning of the

current track.

To play from the beginning of the next track

To play from the beginning of the current track

To play from the beginning of the preceding track

● These operations can also be performed when the unit is

paused or stopped.

● When using or on the remote control:

If (or ) is pressed and held, the track number

is continuously changed to higher numbers (or lower

numbers).

● When using SKIP/SEARCH on the front panel:

Be careful not to press and hold the button, otherwise

the selected track is played forward (or backward)

rapidly.

To skip to the beginning of the desired track (SKIP SEARCH)

(Press once.)

(Press twice.)

English

E-11

Changing displays

CDX-596

You can select any of the four time displays (1 – 4) by pressing TEXT/TIME. When you play a CD-TEXT disc, the disc title,

artist name, and track name (5 – 7) are also displayed.

CDX-496 and CDX-396

You can select any of the four time displays by pressing TIME.

345678910

TITLE

CD-TEXT

345678910

ARTIST

CD-TEXT

345678910

TRACK

CD-TEXT

345678910

1Elapsed time of the current track

2 Remaining time of the current track

3 Total disc play time

4 Total remaining time on the disc 5 Disc title

6 Artist name

7 Track name

TOTAL

REMAIN

TOTAL

1 Elapsed time of the current track

2 Remaining time of the current track 3 Total disc play time

4 Total remaining time on the disc

TIME

TEXT/

TIME

Other useful functions

Notes

● The disc title, artist name, or track name may not be displayed with some CD-TEXT discs. In that case, “(NO ENTRY)” appears on the

display.

● When playing a CD-TEXT disc, “CD-TEXT” also lights up on displays 1 – 4.

E-12

Changing brightness of the display

CDX-596

You can change the brightness of the display (or turn off the illumination) by pressing DIMMER.

During play

Normal illumination

Dim

(off)*

* While the display illumination is off,

the AUTO DISPLAY OFF indicator

on the front panel lights up.

During a stop or a pause

Normal illumination

Dim

Dim*

* The AUTO DISPLAY OFF indicator lights up.

If a disc is played in this state, the display

illumination will be turned off.

CDX-496, CDX-396

If desired, you can change brightness of the display

in three degrees by pressing DIMMER.

Adjusting the level of signals output to the amplifier and the headphone listening level

CDX-596 and CDX-496 only

Normal illumination

Slightly dim

Dim

PHONES

DIMMER

OUTPUT LEVEL

+–

AUTO

DISPLAY OFF

You can adjust the level of signals output to the amplifier by

pressing

–

OUTPUT LEVEL

Automatic spacing

If you record a disc onto tape with an insufficient time space

between tracks, the tape deck will not be able to perform

blank search operations on the tape correctly. To prevent

such a search mistake of the deck, press SPACE and light

up “SPACE” on the display before recording. Spaces of

about 4 seconds are inserted between the tracks.

“SPACE” disappears

from the display.

Note

When the automatic spacing function is in effect, the display

of the total time and of the total remaining time will include

each of the 4 second intervals placed between tracks.

To cancel the automatic spacing function

Press SPACE.

SPACE

PHONES

When you listen with headphones,

connect the headphones to the

PHONES jack and adjust the

volume by pressing

–

OUTPUT

LEVEL

+. At that time, note that

this adjustment will also vary the

signal level output to the amplifier.

English

E-13

The unit can play the tracks on a disc in a random sequence.

RANDOM-SEQUENCE PLAY

To perform random-sequence play

Press RANDOM.

To cancel random-sequence play

Press or RANDOM.

Notes

● This feature will not function while programming, or during

programmed play.

● If (SKIP/SEARCH ) is pressed during random-

sequence play, the next randomly programmed track will be

played. If ( SKIP/SEARCH) is pressed, play will

return to the beginning of the current track.

● This indication appears while the unit is mixing up

tracks.

● Total remaining time on the disc will not be displayed during

random-sequence play.

● CDX-596 and CDX-496 only

If the power is switched off during random-sequence play,

pressing POWER again to turn on the unit will automatically

restore random-sequence play.

You can play any desired track or the entire disc repeatedly by pressing REPEAT. The repeat play mode will change whenever

you press REPEAT.

REPEAT PLAY

CDX-596

(off)

CDX-496, CDX-396

(off)

SINGLE REPEAT (S)

A single track is played repeatedly.

* This also works for programmed play and random-sequence

play. (If repeat play is switched off, programmed play or

random-sequence play will be resumed.)

FULL REPEAT (F)

All tracks (the entire disc) are played repeatedly.

* During programmed play, all programmed tracks are played

repeatedly.

* During random-sequence play, all randomly sequenced tracks

are played repeatedly in the same order.

* CDX-596 and CDX-496 only

If the power is switched off during FULL REPEAT play,

pressing POWER again to turn on the unit will automatically

restore FULL REPEAT play.

RANDOM

REPEAT

REPEAT S

REPEAT F

SINGLE

REPEAT

FULL

REPEAT

E-14

You can enjoy listening to your favorite tracks in any desired order by programming tracks. As many as 40 tracks can be

programmed in sequence.

PROGRAM PLAY

Press to stop the unit.

2 Press PROG.

3 Program a desired track by

pressing the corresponding

numeric button.

Repeat this operation to program more tracks.

You can select the same track again.

4 When programming is finished,

press PROG.

5 Press to begin play.

Display information during programming

CDX-596

CDX-496, CDX-396

Shows the program number for the track to be

programmed next.

2 Shows the selected track number.

3 Shows only the numbers of programmed tracks.

4 Shows the total time of the tracks currently

programmed.

* If the total time becomes 100 minutes or more, the first

digit will not be displayed.

Notes

● If, during programming, TIME is pressed, the program number

display can be changed to display the total time of the

programmed tracks. To return to the previous display, press

TIME once again.

● / ( SKIP/SEARCH ) can be used during

playing, but only within the range of the programmed tracks.

● / ( SKIP/SEARCH ) can be used during

playing to search all tracks, including unprogrammed tracks.

PROG

PROGCLEAR

TAPE

INDEX

2, 4

RANDOM

REPEAT

PROGRAM

TOTAL

PROGRAM

TOTAL

PROGRAM

TOTAL

PROGRAM

Blinks.

CDX-596

CDX-496, CDX-396

PROG

English

E-15

To stop program play

Press . The first programmed track number will be

displayed.

To resume play, press . Play will begin from the

beginning of the program.

To clear program data

There are several methods, as described below.

● Press or CLEAR while the unit is stopped.

● Open the disc tray.

● Switch off the power.

To check program data

1. If during program play, press .

2. Press PROG.

3. Each time (SKIP/SEARCH ) is pressed, the

track numbers and sequential order of the programmed

tracks can be checked one after another. The display of

the track number can be returned (sequentially in

reverse order) by pressing ( SKIP/SEARCH).

To correct program data

1. Follow the procedure described in “To check program

data”.

2. Display the track number to be corrected by pressing

/ ( SKIP/SEARCH ).

3. Press a numeric button to select a desired track to

replace the one displayed. The previously programmed

track will be cleared from the memory, and the new one

will be programmed.

4. Press PROG to complete the correction. To begin play

immediately after making the correction, press

instead of pressing PROG.

If the disc includes index numbers, play can be started from any desired index number.

INDEX SEARCH

Press a numeric button to select a track which has

index numbers.

2 Press INDEX.

3 Press a numeric button to select the desired index

number.

To cancel the index search function

Press INDEX.

Notes

● Not all discs have index numbers. In addition, among those

discs which have index numbers, not all discs necessarily have

more than one index number.

● The index system is a method for sub-dividing tracks into

smaller divisions for easier location of those parts. The liner

notes contained in the disc case usually tell that such index

numbers are included with the mark.

● If an index number is selected that is higher than any index

number on that disc, play will start from the last index point on

the disc.

● For some discs, play may begin slightly prior to the actual

designated index point.

● If the disc has no encoded index points, play will begin from

the beginning of the selected track.

● The index number can be designated only while “INDEX” is

illuminated.

INDEX

11 12

5678910

CDX-596

CDX-496, CDX-396

E-16

60 90

The unit can program tracks on a disc for recording onto tape. By considering the tape’s total possible recording time, the unit

will automatically program tracks or help you program tracks so they will fit onto the tape with the least amount of unrecorded

space at each end of the tape.

TRACK PROGRAMMING FOR RECORDING TO TAPE

m Automatic tape-programming

The unit will automatically program tracks on a disc with their original order.

1 Press to stop the unit.

* The peak level search function of this unit is useful for

adjusting recording level on the tape deck. (Refer to page

20.)

2 If desired, you can automatically insert additional

time space between tracks by pressing SPACE to

light up “SPACE” on the display. (Refer to page 12.)

3 Press TAPE to show the tape’s total possible

recording time on the display.

You can select any of the four tape lengths by

pressing TAPE.

If desired, you can also enter the tape’s total possible

recording time manually.

Example: For a C-64 tape (32 minutes on each side),

press “6” and “4”.

4 Press REPEAT.

The unit automatically programs tracks for both side A

and side B considering the tape’s total time.

5 Begin recording on the tape deck, and then press

on this unit.

6 The unit will pause at the end of side A of the tape.

Turn the tape over to side B. Resume recording,

and then press or on this unit.

RANDOM

REPEAT

PEAK

SPACE

PROGCLEAR

TAPE

INDEX

TEXT/

TIME

5, 6

SPACE

TAPE

REPEAT

SPACE

CDX-596

“TAPE 46” turns on.

CDX-496, CDX-396

“C-46” turns on.

(off)

Sidan laddas...

Yamaha CDX-396 Användarmanual

Stämpla: Yamaha

Modell: CDX-396

Kategori: CD-spelare

Typ: Användarmanual

Denna manual är också lämplig för

Ladda ner PDF

rapportera

på andra språk

italiano: Yamaha CDX-396 Manuale utente
čeština: Yamaha CDX-396 Uživatelský manuál
español: Yamaha CDX-396 Manual de usuario
Deutsch: Yamaha CDX-396 Benutzerhandbuch
polski: Yamaha CDX-396 Instrukcja obsługi
português: Yamaha CDX-396 Manual do usuário
français: Yamaha CDX-396 Manuel utilisateur
Türkçe: Yamaha CDX-396 Kullanım kılavuzu
English: Yamaha CDX-396 User manual
dansk: Yamaha CDX-396 Brugermanual
русский: Yamaha CDX-396 Руководство пользователя
suomi: Yamaha CDX-396 Ohjekirja
Nederlands: Yamaha CDX-396 Handleiding
română: Yamaha CDX-396 Manual de utilizare

Yamaha CDX-396 Användarmanual

Denna manual är också lämplig för

Yamaha CDX-396 Användarmanual

på andra språk

Relaterade papper