NOVA LIFE 80139-022-21 Användarmanual

Typ
Användarmanual
NO:
SE:
English:
Advarsel:
-Bruk kun pærer som anvist etiketten på lampen.
-Slå av lampen før bytting av pære og vent til pæren er avkjølt. Vis forsiktighet ved berøring av lampen når
den er tent. Den kan være varm.
Varning:
-Använd endast glödlampor enligt anvisningar på lampans etikett.
-Stäng av lampan innan du byter glödlampa och vänta tills lampan har svalnat. Var särskilt försiktig vid
beröring av lampan när den är tänd. Det kan vara varmt.
Warning:
-Only use bulbs as directed on the label on the lamp.
-Turn off the lamp before replacing the bulb and wait until the bulb has cooled. Take special care to touch
the lamp when the lamp is lit. It can be hot.
INSTRUCTIONS MANUAL
Ceiling Lamp
for MAGGIE
Art Nr. 80139-022-21
14
www.lampehuset.no
CAUTION:
Package contents (parts are not to scale):
Care and Cleaning
EXTERIOR MAINTENANCE
1. To clean the outside of the fixture, use a dry or slightly dampened clean cloth (use clean water,
never a solvent) to wipe the surface of the fixture.
2. Do not use any cleaners with chemicals, solvents or harsh abrasives. Use only a dry soft cloth to
dust or wipe carefully.
AC
D
E
F
B
QuantityDescriptionPart
A Fixture body
Decoration cap
Glass
Self-Tapping screw
Wall expansion particle
B
C
D
E
F
1
1
1
3
3
silicon gasket 3
230V E27 1 x 40W Ball (not include)
Recommend LED bulb
Light source
2 3
Mounting the wall expansion
particles in the ceiling:
Connecting the supply wire to
the fixture wire:
Put the terminal box between
the ceiling cap and metal
bracket:
Assemble the decoration cap
and glass on to the fixture:
Max E27 230V 40W Ball;
Recommend LED bulb
Installation
PLANNING THE INSTALLATION
Read all instructions before assembly and installation. Before starting installation of the fixture or
removal of a previous fixture, disconnect the power by turning off the circuit breaker or by removing
the fuse at the fuse box. To avoid damaging this product, assemble it on a soft, non-abrasive
surface such as carpet or cardboard.
Pre-Installation
TOOLS REQUIRED
Cross
Screwdriver
Wire
Cutter
Flathead
Screwdriver
Ladder Safety
Goggles
Knife
Percussion
drill
Chopping
bit Dia 6 mm
Operation
Turn on power at the circuit breaker or fuse box.
Turn the light switch on to activate the fixture.
A
C
D
E
F
B
supply wire
fixture wire
supply wire
Step 1.
Step 1.
Step 2.
Step 2.
Step 3.
Step 3.
Mounting the ceiling cap on to
the ceiling by three self-
tapping screws:
Insert the correct light bulb:
Step 4.
Step 4.
Step 5.
Step 5.
Step 6.
Step 6.
Installation (continued)
terminal box
metal
bracket
terminal box
ceiling cap
  • Page 1 1
  • Page 2 2

NOVA LIFE 80139-022-21 Användarmanual

Typ
Användarmanual