Yamaha CD-NT670 Användarmanual

Typ
Användarmanual

Denna manual är också lämplig för

En 45
Updating the firmware
When a new firmware for the unit is released, a message to update your current firmware will be shown on the front panel display (when the unit is connected to the Internet only).
In this page, an updating method via a network using the option setting is shown.
1 Press .
The option menu is shown on the front panel
display.
2 Select [Firmware Update] with S/T,
and press .
3 Select [Update] with S/T and press .
4 Select [Network] with S/T, and press
.
Press ENTER again, then update starts.
When update finishes, messages are shown in the
following order: “UPDATE SUCCESS”, “PLEASE ...”,
and “POWER OFF!”
5 Press A on the front panel.
Update is applied.
S/T
ENTER
2, 3, 4
OPTION
1
Do not operate the unit or disconnect the power
cable and network cables while updating.
When Internet speed is not fast enough or the unit
is connected to the wireless network via a wireless
network adapter, network update may not be
possible depending on the condition of the
wireless connection. In this case, try again or update
the firmware using a USB memory device. The
firmware can be downloaded from the Yamaha
Website.
To update the firmware using a USB memory
device
You can download the firmware to the USB memory
device, and connect that USB memory device to the
USB jack on the unit.
Select [USB] in step 4 to start the update.
  • Page 1 1

Yamaha CD-NT670 Användarmanual

Typ
Användarmanual
Denna manual är också lämplig för