POINT PRO PODH7030 AVFUKTER, 30 L Användarmanual

Dehumidifier

with Smart Dehumidifying Control

PODH7030

User Manual

32

Thank you for purchasing your new POINT Upright Fridge. These

operating instructions will help you use it properly and safely. We

recommend that you spend some time reading this instruction manual

in order that you fully understand all the operational features it oers.

Read all the safety instructions carefully before use and keep this

instruction manual for future reference.

Takk for at du kjøpte ditt nye POINT stående kjøleskap. Denne

bruksanvisningen vil hjelpe deg med å bruke den på en trygg og riktig

måte. Vi anbefaler at du tar deg tid til å lese gjennom hele

bruksanvisningen for å bli fortrolig med alle funksjonene som tilbys.

Les alle sikkerhetsanvisningene nøye før bruk, og oppbevar

bruksanvisningen for fremtidig referanse.

Kiitos, kun valitsit uuden POINT-jääkaappi. Nämä käyttöohjeet

opastavat sinua käyttämään laitetta oikein ja turvallisesti. On

suositeltavaa käyttää aikaa tämän käyttöoppaan lukemiseen, jotta

ymmärrät täysin, mitä toiminnallisia ominaisuuksia tuote tarjoaa. Lue

kaikki turvallisuusohjeet huolellisesti ennen laitteen käyttöä ja säilytä

käyttöopas myöhempää käyttöä varten.

Tak for købet af dit nye køleskab fra POINT. Disse brugervejledninger

hjælper dig med at bruge dette apparat rigtigt og sikkert. Vi anbefaler,

at du læser denne brugervejledning, så du får en fuld forståelse af

hvordan alle funktionerne virker. Læs sikkerhedsforskrifterne grundigt

inden brug, og gem denne brugervejledning til senere brug.

Tack för att du har köpt ditt nya stående kylskåp från POINT. Denna

bruksanvisning hjälper dig att använda den på ett säkert och korrekt

sätt. Vi rekommenderar att du tar dig tid att läsa igenom denna

bruksanvisning för att till fullo förstå alla driftfunktioner som den

erbjuder. Läs noga igenom alla säkerhetsinstruktioner före användning

och spara bruksanvisningen för framtida bruk.

Thank you for purchasing your new Point pro series dehumidifier.

These operating instructions will help you use it properly and safely.

We recommend that you spend some time reading this instruction

manual in order that you fully understand all the operational features

it offers. Read all the safety instructions carefully before use and keep

this instruction manual for future reference.

Takk for at du kjøpte din nye Point pro series-avfukter.

Denne bruksanvisningen vil hjelpe deg med å bruke den på en trygg

og riktig måte. Vi anbefaler at du tar deg tid til å lese gjennom

hele bruksanvisningen for å bli fortrolig med alle funksjonene som

tilbys. Les alle sikkerhetsanvisningene nøye før bruk, og oppbevar

bruksanvisningen for fremtidig referanse.

Kiitos, kun valitsit uuden Point pro series-ilmankuivaimen.

Nämä käyttöohjeet opastavat sinua käyttämään laitetta oikein ja

turvallisesti. On suositeltavaa käyttää aikaa tämän käyttöoppaan

lukemiseen, jotta ymmärrät täysin, mitä toiminnallisia ominaisuuksia

tuote tarjoaa. Lue kaikki turvallisuusohjeet huolellisesti ennen laitteen

käyttöä ja säilytä käyttöopas myöhempää käyttöä varten.

Tak for købet af din nye affugter fra Point pro series.

Disse brugervejledninger hjælper dig med at bruge dette apparat

rigtigt og sikkert. Vi anbefaler, at du læser denne brugervejledning,

så du får en fuld forståelse af hvordan alle funktionerne virker.

Læs sikkerhedsforskrifterne grundigt inden brug, og gem denne

brugervejledning til senere brug.

Tack för att du har köpt en avfuktare från Point pro series.

Denna bruksanvisning hjälper dig att använda den på ett säkert och

korrekt sätt. Vi rekommenderar att du tar dig tid att läsa igenom denna

bruksanvisning för att till fullo förstå alla driftfunktioner som den

erbjuder. Läs noga igenom alla säkerhetsinstruktioner före användning

och spara bruksanvisningen för framtida bruk.

3

Thank you for purchasing your new POINT Upright Fridge. These

operating instructions will help you use it properly and safely. We

recommend that you spend some time reading this instruction manual

in order that you fully understand all the operational features it oers.

Read all the safety instructions carefully before use and keep this

instruction manual for future reference.

Takk for at du kjøpte ditt nye POINT stående kjøleskap. Denne

bruksanvisningen vil hjelpe deg med å bruke den på en trygg og riktig

måte. Vi anbefaler at du tar deg tid til å lese gjennom hele

bruksanvisningen for å bli fortrolig med alle funksjonene som tilbys.

Les alle sikkerhetsanvisningene nøye før bruk, og oppbevar

bruksanvisningen for fremtidig referanse.

Kiitos, kun valitsit uuden POINT-jääkaappi. Nämä käyttöohjeet

opastavat sinua käyttämään laitetta oikein ja turvallisesti. On

suositeltavaa käyttää aikaa tämän käyttöoppaan lukemiseen, jotta

ymmärrät täysin, mitä toiminnallisia ominaisuuksia tuote tarjoaa. Lue

kaikki turvallisuusohjeet huolellisesti ennen laitteen käyttöä ja säilytä

käyttöopas myöhempää käyttöä varten.

Tak for købet af dit nye køleskab fra POINT. Disse brugervejledninger

hjælper dig med at bruge dette apparat rigtigt og sikkert. Vi anbefaler,

at du læser denne brugervejledning, så du får en fuld forståelse af

hvordan alle funktionerne virker. Læs sikkerhedsforskrifterne grundigt

inden brug, og gem denne brugervejledning til senere brug.

Tack för att du har köpt ditt nya stående kylskåp från POINT. Denna

bruksanvisning hjälper dig att använda den på ett säkert och korrekt

sätt. Vi rekommenderar att du tar dig tid att läsa igenom denna

bruksanvisning för att till fullo förstå alla driftfunktioner som den

erbjuder. Läs noga igenom alla säkerhetsinstruktioner före användning

och spara bruksanvisningen för framtida bruk.

4

37

70

103

136

36

69

102

135

168

-

54

SAFETY WARNINGS

Read Safety Precautions Before Operation and

Installation.

To prevent death or injury to the user or other people

and property damage, the following instructions must

be followed. Incorrect operation due to ignoring of

instructions may cause death, harm or damage.

WARNING CAUTION

This symbol indicates the

possibility of personnel

injury or loss of life.

This symbol indicates the

possibility of property

damage or serious

consequences.

WARNING

• Do not exceed the rating of the power outlet or

connection device.

• Do not operate or stop the appliance by switching on

or off the power.

• Do not damage or use an unspecified mains power cable.

• Do not modify mains power cable length or share the

outlet with other appliances.

• Do not insert or pull out plug with wet hands.

• Do not install the appliance in a location that may be

exposed to combustible gas.

• Do not place the appliance near a heat source.

• Disconnect the power if strange sounds, smell, or

smoke comes from the appliance.

5

• You should never try to take apart or repair the

appliance by yourself.

• Before cleaning, turn off the power and unplug the

appliance.

• Do not use the appliance near flammable gas or

combustibles, such as gasoline, benzene, thinner, etc.

• Do not drink or use the water drained from the

appliance.

• Do not take the water bucket out during operation.

• Do not use the appliance in small spaces.

• Do not put in places where water may splash onto the

appliance.

• Place the appliance on a level, sturdy section of the

floor.

• Do not cover the intake or exhaust openings with

cloths or towels.

• Care should be taken when using the appliance in a

room with the following persons: infants, children,

elderly people, and people not sensitive to humidity.

• Do not use in areas where chemicals are handled.

• Never insert your finger or other foreign objects into

grills or openings. Take special care to warn children of

these dangers.

• Do not place heavy objects on the mains power cable

and take care so that it is not compressed. Do not

climb up on or sit on the appliance.

• Always insert the filters securely. Clean filters once

every two weeks.

76

• If water enters the appliance, turn it off and

disconnect the power, contact a qualified service

technician.

• Do not place flower vases or other water containers on

top of the appliance.

• Do not use extension cords.

CAUTION

• This appliance can be used by children aged from 8

years and above and person with reduced physical,

sensory or mental capabilities or lack of experience

and knowledge if they have been given supervision or

instruction concerning use of the appliance in a safe

way and understand the hazards involved. Children

shall not play with the appliance. Cleaning and user

maintenance shall not be made by children without

supervision.

• If the mains power cable is damaged, it must be

replaced by the manufacturer, its service agent or

similarly qualified persons in order to avoid a hazard.

• Prior to cleaning or other maintenance, the appliance

must be disconnected from the mains power supply.

• Do not install the appliance in a location that may

be exposed to combustible gas. If combustible gas

accumulates around the appliance, it may cause fire.

• If the appliance is knocked over during use, turn

it off and unplug it from the mains power supply

immediately. Visually inspect the appliance to ensure

there is no damage. If you suspect the appliance has

7

been damaged, contact a technician or customer

service for assistance.

• In a thunderstorm, the mains power supply must

be cut off to avoid damage to the appliance due to

lightning.

• Do not run the mains power cable under carpeting.

Do not cover the mains power cable with throw rugs,

runners, or similar coverings.

• Do not route the mains power cable under furniture or

appliances. Arrange the mains power cable away from

traffic area and where it will not be tripped over.

• Do not operate the appliance with a damaged mains

power cable or plug. Discard the appliance or return it

to an authorized service facility for examination and/

or repair.

• To reduce the risk of fire or electric shock, do not

use the appliance with any solid-state speed control

device.

• The appliance shall be installed in accordance with

national wiring regulations. Contact the authorised

service technician for repair or maintenance of this

appliance.

• Turn off the appliance when not in use.

• The manufactures nameplate is located on the rear

panel of the appliance and contains electrical and

other technical data specific to this appliance.

• Be sure the appliance is properly grounded. To

minimize shock and fire hazards, proper grounding is

98

important. The mains power cable is equipped with

a three-prong grounding plug for protection against

shock hazards.

• The appliance must be used in a properly grounded

wall receptacle. If the wall receptacle you intend to

use is not adequately grounded or protected by a

time delay fuse or circuit breaker (please refer to the

nameplate for the electrical data), have a qualified

electrician install the proper receptacle.

• Do not operate your appliance in a wet room such as a

bathroom or laundry room.

• The appliances circuit board (PCB) is designed

with a fuse to provide overcurrent protection. The

specifications of the fuse are printed on the circuit

board, such as: T3.15A/250V (or 350V), etc.

WARNING for Using R290 Refrigerant

• Do not use means to accelerate the defrosting process

or to clean, other than those recommended by the

manufacturer.

• The appliance shall be stored in a room without

continuously operating ignition sources (for example:

open flames, an operating gas appliance or an

operating electric heater).

• Do not pierce or burn.

• Be aware that the refrigerants may not contain an

odour.

• Appliance should be installed, operated and stored in

a room with a floor area according to the amount of

9

refrigerant to be charged. For specific information on

the type of gas and the amount, please refer to the

relevant label on the appliance itself.

• Appliance should be installed, operated and stored in

a room with a floor area larger than 4 m2.

• Compliance with national gas regulations shall be

observed.

• Keep ventilation openings clear of obstruction.

• The appliance shall be stored so as to prevent

mechanical damage from occurring.

• A warning that the appliance shall be stored in a well-

ventilated area where the room size corresponds to

the room area as specified for operation.

• Any person who is involved with working on or breaking

into a refrigerant circuit should hold a current valid

certificate from an industry-accredited assessment

authority, which authorises their competence to handle

refrigerants safely in accordance with an industry

recognised assessment specification.

• Servicing shall only be performed as recommended by

the equipment manufacturer. Maintenance and repair

requiring the assistance of other skilled personnel

shall be carried out under the supervision of the person

competent in the use of flammable refrigerants.

• The appliance shall be stored in a room without

continuously operating open flames (for example an

operating gas appliance) and ignition sources (for

example an operating electric heater).

1110

Caution: Risk of fire/flammable materials

Explanation of symbols displayed on the unit (For the

unit adopts R290 Refrigerant only):

WARNING This symbol shows that this appliance used

a flammable refrigerant. If the refrigerant is

leaked and exposed to an external ignition

source, there is a risk of fire.

CAUTION This symbol shows that the operation manual

should be read carefully.

CAUTION This symbol shows that a service personnel

should be handling this equipment with

reference to the installation manual.

CAUTION This symbol shows that information is

available such as the operating manual or

installation manual.

11

1. Transport of equipment containing flammable

refrigerants

See transport regulations

2. Marking of equipment using signs

See local regulations

3. Disposal of equipment using flammable refrigerants

See national regulations.

4. Storage of equipment/appliances

The storage of equipment should be in accordance

with the manufacturer's instructions.

5. Storage of packed (unsold) equipment

Storage package protection should be constructed

such that mechanical damage to the equipment

inside the package will not cause a leak of the

refrigerant charge. The maximum number of pieces

of equipment permitted to be stored together will be

determined by local regulations.

6. Information on servicing

1) Checks to the area

Prior to beginning work on systems containing

flammable refrigerants, safety checks are necessary

to ensure that the risk of ignition is minimised. For

repair to the refrigerating system, the following

precautions shall be complied with prior to conducting

work on the system.

2) Work procedure

Work shall be undertaken under a controlled

procedure so as to minimise the risk of a flammable

1312

gas or vapour being present while the work is being

performed.

3) General work area

All maintenance staff and others working in the local

area shall be instructed on the nature of work being

carried out. Work in confined spaces shall be avoided.

The area around the workspace shall be sectioned off.

Ensure that the conditions within the area have been

made safe by control of flammable material.

4) Checking for presence of refrigerant

The area shall be checked with an appropriate

refrigerant detector prior to and during work,

to ensure the technician is aware of potentially

flammable atmospheres. Ensure that the leak

detection equipment being used is suitable for use

with flammable refrigerants, i.e. non-sparking,

adequately sealed or intrinsically safe.

5) Presence of fire extinguisher

If any hot work is to be conducted on the refrigeration

equipment or any associated parts, appropriate fire

extinguishing equipment shall be available to hand.

Have a dry powder or CO2 fire extinguisher adjacent

to the charging area.

6) No ignition sources

No person carrying out work in relation to a

refrigeration system which involves exposing any

pipework that contains or has contained flammable

refrigerant shall use any sources of ignition in such

13

a manner that it may lead to the risk of fire or

explosion. All possible ignition sources, including

cigarette smoking, should be kept sufficiently far

away from the site of installation, repairing, removing

and disposal, during which flammable refrigerant can

possibly be released to the surrounding space. Prior

to work taking place, the area around the equipment

is to be surveyed to make sure that there are no

flammable hazards or ignition risks. No Smoking

signs shall be displayed.

7) Ventilated area

Ensure that the area is in the open or that it is

adequately ventilated before breaking into the

system or conducting any hot work. A degree of

ventilation shall continue during the period that the

work is carried out. The ventilation should safely

disperse any released refrigerant and preferably expel

it externally into the atmosphere.

8) Checks to the refrigeration equipment

Where electrical components are being changed,

they shall be fit for the purpose and to the correct

specification. At all times the manufacturer's

maintenance and service guidelines shall be followed.

If in doubt consult the manufacturer's technical

department for assistance. The following checks

shall be applied to installations using flammable

refrigerants:

The charge size is in accordance with the room size

1514

within which the refrigerant containing parts are

installed;

The ventilation machinery and outlets are operating

adequately and are not obstructed;

If an indirect refrigerating circuit is being used, the

secondary circuit shall be checked for the presence

of refrigerant; Marking to the equipment continues

to be visible and legible. Markings and signs that are

illegible shall be corrected;

Refrigeration pipe or components are installed in a

position where they are unlikely to be exposed to any

substance which may corrode refrigerant containing

components, unless the components are constructed

of materials which are inherently resistant to being

corroded or are suitably protected against being so

corroded.

9) Checks to electrical devices

Repair and maintenance to electrical components

shall include initial safety checks and component

inspection procedures. If a fault exists that could

compromise safety, then no electrical supply shall be

connected to the circuit until it is satisfactorily dealt

with. If the fault cannot be corrected immediately

but it is necessary to continue operation, an adequate

temporary solution shall be used. This shall be

reported to the owner of the equipment so all parties

are advised.

Initial safety checks shall include:

15

That capacitors are discharged: this shall be done in

a safe manner to avoid possibility of sparking; That

there no live electrical components and wiring are

exposed while charging, recovering or purging the

system; That there is continuity of earth bonding.

7. Repairs to sealed components

1) During repairs to sealed components, all electrical

supplies shall be disconnected from the equipment

being worked upon prior to any removal of sealed

covers, etc. If it is absolutely necessary to have an

electrical supply to equipment during servicing, then

a permanently operating form of leak detection shall

be located at the most critical point to warn of a

potentially hazardous situation.

2) Particular attention shall be paid to the following to

ensure that by working on electrical components, the

casing is not altered in such a way that the level of

protection is affected. This shall include damage to

cables, excessive number of connections, terminals

not made to original specification, damage to seals,

incorrect fitting of glands, etc. Ensure that apparatus

is mounted securely. Ensure that seals or sealing

materials have not degraded such that they no

longer serve the purpose of preventing the ingress of

flammable atmospheres. Replacement parts shall be

in accordance with the manufacturer's specifications.

NOTE: The use of silicon sealant may inhibit the

effectiveness of some types of leak detection

1716

equipment. Intrinsically safe components do not have

to be isolated prior to working on them.

8. Repair to intrinsically safe components

Do not apply any permanent inductive or capacitance

loads to the circuit without ensuring that this will

not exceed the permissible voltage and current

permitted for the equipment in use. Intrinsically safe

components are the only types that can be worked on

while live in the presence of a flammable atmosphere.

The test apparatus shall be at the correct rating.

Replace components only with parts specified by the

manufacturer. Other parts may result in the ignition

of refrigerant in the atmosphere from a leak.

9. Cabling

Check that cabling will not be subject to wear,

corrosion, excessive pressure, vibration, sharp edges

or any other adverse environmental effects. The

check shall also take into account the effects of

aging or continual vibration from sources such as

compressors or fans.

10. Detection of flammable refrigerants

Under no circumstances shall potential sources of

ignition be used in the searching for or detection of

refrigerant leaks. A halide torch (or any other detector

using a naked flame) shall not be used.

11. Leak detection methods

The following leak detection methods are deemed

acceptable for systems containing flammable

17

refrigerants. Electronic leak detectors shall be used

to detect flammable refrigerants, but the sensitivity

may not be adequate, or may need re-calibration.

(Detection equipment shall be calibrated in a

refrigerant-free area.) Ensure that the detector is not

a potential source of ignition and is suitable for the

refrigerant used. Leak detection equipment shall be

set at a percentage of the LFL of the refrigerant and

shall be calibrated to the refrigerant employed and

the appropriate percentage of gas (25 % maximum)

is confirmed. Leak detection fluids are suitable for

use with most refrigerants but the use of detergents

containing chlorine shall be avoided as the chlorine

may react with the refrigerant and corrode the

copper pipe-work. If a leak is suspected, all naked

flames shall be removed/ extinguished. If a leakage

of refrigerant is found which requires brazing, all of

the refrigerant shall be recovered from the system, or

isolated (by means of shut off valves) in a part of the

system remote from the leak. Oxygen free nitrogen

(OFN) shall then be purged through the system both

before and during the brazing process.

12. Removal and evacuation

When breaking into the refrigerant circuit to make

repairs or for any other purpose conventional

procedures shall be used. However, it is important

that best practice is followed since flammability is

a consideration. The following procedure shall be

1918

adhered to:

Remove refrigerant; Purge the circuit with inert gas;

Evacuate; Purge again with inert gas; Open the circuit

by cutting or brazing.

The refrigerant charge shall be recovered into

the correct recovery cylinders. The system shall

be flushed with OFN to render the unit safe. This

process may need to be repeated several times.

Compressed air or oxygen shall not be used for this

task. Flushing shall be achieved by breaking the

vacuum in the system with OFN and continuing

to fill until the working pressure is achieved, then

venting to atmosphere, and finally pulling down to

a vacuum. This process shall be repeated until no

refrigerant is within the system. When the final OFN

charge is used, the system shall be vented down to

atmospheric pressure to enable work to take place.

This operation is absolutely vital if brazing operations

on the pipe-work are to take place. Ensure that the

outlet for the vacuum pump is not close to any ignition

sources and there is ventilation available.

13. Charging procedures

In addition to conventional charging procedures, the

following requirements shall be followed. Ensure that

contamination of different refrigerants does not

occur when using charging equipment. Hoses or lines

shall be as short as possible to minimise the amount

of refrigerant contained in them.

19

Cylinders shall be kept upright.

Ensure that the refrigeration system is earthed prior

to charging the system with refrigerant.

Label the system when charging is complete (if not

already).

Extreme care shall be taken not to overfill the

refrigeration system. Prior to recharging the system

it shall be pressure tested with OFN. The system shall

be leak tested on completion of charging but prior to

commissioning. A follow up leak test shall be carried

out prior to leaving the site.

14. Decommissioning

Before carrying out this procedure, it is essential

that the technician is completely familiar with the

equipment and all its detail. It is recommended

good practice that all refrigerants are recovered

safely. Prior to the task being carried out, an oil and

refrigerant sample shall be taken in case analysis is

required prior to re-use of reclaimed refrigerant. It is

essential that electrical power is available before the

task is commenced.

a) Become familiar with the equipment and its

operation. b) Isolate system electrically. c) Before

attempting the procedure ensure that: Mechanical

handling equipment is available, if required, for

handling refrigerant cylinders; All personal protective

equipment is available and being used correctly;

The recovery process is supervised at all times by a

2120

competent person; Recovery equipment and cylinders

conform to the appropriate standards. d) Pump down

refrigerant system, if possible. e) If a vacuum is not

possible, make a manifold so that refrigerant can be

removed from various parts of the system. f) Make

sure that cylinder is situated on the scales before

recovery takes place. g) Start the recovery machine

and operate in accordance with manufacturer's

instructions. h) Do not overfill cylinders. (No more

than 80 % volume liquid charge). i) Do not exceed

the maximum working pressure of the cylinder, even

temporarily. j) When the cylinders have been filled

correctly and the process completed, make sure

that the cylinders and the equipment are removed

from site promptly and all isolation valves on the

equipment are closed off. k) Recovered refrigerant

shall not be charged into another refrigeration

system unless it has been cleaned and checked.

15. Labelling

Equipment shall be labelled stating that it has been

de-commissioned and emptied of refrigerant. The

label shall be dated and signed. Ensure that there

are labels on the equipment stating the equipment

contains flammable refrigerant.

16. Recovery

When removing refrigerant from a system, either

for servicing or decommissioning, it is recommended

good practice that all refrigerants are removed safely.

Sidan laddas ...

POINT PRO PODH7030 AVFUKTER, 30 L Användarmanual

POINT PRO PODH7030 AVFUKTER, 30 L Användarmanual

på andra språk

Relaterade papper

Andra dokument