Yamaha PW5000 Användarmanual

Kategori
Kompletterande musikutrustning
Typ
Användarmanual
Thank you for purchasing a PW5000 Power Supply.
The PW5000 has been specifically designed for use with Yamaha PM5000 Series Mixing Consoles.
In order to achieve optimum performance from the PW5000, and take full advantage of the features
it provides, please read this manual carefully and keep it handy for future reference.
* The illustrations as shown in this Owner’s Manual are for instructional purposes only, and may be different from the ones on your device.
* The company names and product names in this Owner’s Manual are the trademarks or registered trademarks of their respective companies.
For PM5000 Series Mixing Consoles
Owner’s Manual
The above warning is located on the rear of the unit.
Explanation of Graphical Symbols
The lightning flash with arrowhead symbol
within an equilateral triangle is intended to
alert the user to the presence of uninsulated
“dangerous voltage” within the product’s
enclosure that may be of sufficient magni-
tude to constitute a risk of electric shock to
persons.
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and mainte-
nance (servicing) instructions in the litera-
ture accompanying the product.
IMPORTANT SAFETY INSTRUCTIONS
1 Read these instructions.
2Keep these instructions.
3 Heed all warnings.
4 Follow all instructions.
5 Do not use this apparatus near water.
6 Clean only with dry cloth.
7 Do not block any ventilation openings. Install
in accordance with the manufacturer’s instruc-
tions.
8 Do not install near any heat sources such as
radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce
heat.
9 Do not defeat the safety purpose of the polar-
ized or grounding-type plug. A polarized plug
has two blades with one wider than the other.
A grounding type plug has two blades and a
third grounding prong. The wide blade or the
third prong are provided for your safety. If the
provided plug does not fit into your outlet,
consult an electrician for replacement of the
obsolete outlet.
10 Protect the power cord from being walked on
or pinched particularly at plugs, convenience
receptacles, and the point where they exit
from the apparatus.
11 Only use attachments/accessories specified
by the manufacturer.
12 Use only with the cart,
stand, tripod, bracket, or
table specified by the man-
ufacturer, or sold with the
apparatus. When a cart is
used, use caution when
moving the cart/apparatus
combination to avoid injury
from tip-over.
13 Unplug this apparatus during lightning storms
or when unused for long periods of time.
14 Refer all servicing to qualified service person-
nel. Servicing is required when the apparatus
has been damaged in any way, such as power-
supply cord or plug is damaged, liquid has
been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or
has been dropped.
CAUTION: TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK). NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE.
PRECAUTIONS
PLEASE READ CAREFULLY BEFORE PROCEEDING
* Please keep this manual in a safe place for future reference.
WARNING
Always follow the basic precautions listed below to avoid the possibility of serious injury or even death from electrical
shock, short-circuiting, damages, fire or other hazards. These precautions include, but are not limited to, the following:
Only use the voltage specified as correct for the device. The required voltage
is printed on the name plate of the device.
Do not place the power cord near heat sources such as heaters or radiators,
and do not excessively bend or otherwise damage the cord, place heavy
objects on it, or place it in a position where anyone could walk on, trip over,
or roll anything over it.
Do not open the device or attempt to disassemble the internal parts or modify
them in any way. The device contains no user-serviceable parts. If it should
appear to be malfunctioning, discontinue use immediately and have it
inspected by qualified Yamaha service personnel.
Do not expose the device to rain, use it near water or in damp or wet
conditions, or place containers on it containing liquids which might spill into
any openings.
Never insert or remove an electric plug with wet hands.
If the power cord or plug becomes frayed or damaged, or if there is a sudden
loss of sound during use of the device, or if any unusual smells or smoke
should appear to be caused by it, immediately turn off the power switch,
disconnect the electric plug from the outlet, and have the device inspected by
qualified Yamaha service personnel.
If this device should be dropped or damaged, immediately turn off the power
switch, disconnect the electric plug from the outlet, and have the device
inspected by qualified Yamaha service personnel.
CAUTION
Always follow the basic precautions listed below to avoid the possibility of physical injury to you or others, or damage
to the device or other property. These precautions include, but are not limited to, the following:
Remove the electric plug from the outlet when the device is not to be used for
extended periods of time, or during electrical storms.
When removing the electric plug from the device or an outlet, always hold the
plug itself and not the cord. Pulling by the cord can damage it.
•Turn the unit ON or OFF using only the front-panel POWER switch. Turning
the unit ON or OFF by plugging or unplugging the power cord, using a switch
on a power tap, a breaker switch, or similar external means can result in
damage.
Do not turn the POWER switch OFF and ON in rapid succession. Doing so
can result in excessive voltages that can cause damage. Wait at least 5
seconds before turning the POWER switch ON after it has been turned OFF.
When transporting or moving the device, always use two or more people.
Before moving the device, remove all connected cables.
Do not expose the device to excessive dust or vibrations, or extreme cold or
heat (such as in direct sunlight, near a heater, or in a car during the day) to
prevent the possibility of panel disfiguration or damage to the internal
components.
Do not place the device in an unstable position where it might accidentally
fall over.
Do not block the vents. This device has ventilation holes at the front and rear
to prevent the internal temperature from rising too high. In particular, do not
place the device on its side or upside down, or place it in any poorly-
ventilated location, such as a bookcase or closet.
Do not place the device against a wall or other devices since this can cause
inadequate air circulation, and possibly result in the device overheating.
Make sure there is adequate space between the device and any surrounding
wall or other devices: at least, 15cm behind and 15cm above.
Do not use the device in the vicinity of a TV, radio, stereo equipment, mobile
phone, or other electric devices. Otherwise, the device, TV, or radio may
generate noise.
Before connecting the device to other devices, turn off the power for all
devices. Before turning the power on or off for all devices, set all volume
levels to minimum.
Be sure to connect to a properly grounded power source. A ground screw
terminal is provided on the rear panel for safely grounding the device and
preventing electrical shock.
Do not insert your fingers or hand in any gaps or openings on the device
(vents etc.).
•Avoid inserting or dropping foreign objects (paper, plastic, metal, etc.) into
any gaps or openings on the device (vents etc.) If this happens, turn off the
power immediately and unplug the power cord from the AC outlet. Then have
the device inspected by qualified Yamaha service personnel.
Do not rest your weight on the device or place heavy objects on it, and avoid
use excessive force on the buttons, switches or connectors.
Use the cable supplied with the PM5000 console to connect the PW5000
to the PM5000. When parallel-connecting two PW5000 units use the
optional PSL5000 Power Supply Link Cable to connect the second
PW5000 to the main PW5000 unit.
This power supply unit cannot be used in place of the PW4000 for the
PM4000 and PM3500 series mixing consoles, or in place of the PW1D for
the PM1D digital mixing console. The same connectors are used, but with
different pin assignments and voltages.
Yamaha cannot be held responsible for damage caused by improper
use or modifications to the device, or data that is lost or destroyed.
Always turn the power off when the device is not in use.
The performance of components with moving contacts, such as switches, and
connectors, deteriorates over time. Consult qualified Yamaha service personnel
about replacing defective components.
Power supply/Power cord
Do not open
Water warning
If you notice any abnormality
Power supply/Power cord
Location
Connections
Handling caution
(5)-1 1/2
(5)-1 2/2
1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT!
This product, when installed as indicated in the instructions con-
tained in this manual, meets FCC requirements. Modifications not
expressly approved by Yamaha may void your authority, granted by
the FCC, to use the product.
2. IMPORTANT: When connecting this product to accessories and/
or another product use only high quality shielded cables. Cable/s
supplied with this product MUST be used. Follow all installation
instructions. Failure to follow instructions could void your FCC
authorization to use this product in the USA.
3. NOTE: This product has been tested and found to comply with the
requirements listed in FCC Regulations, Part 15 for Class “B” digital
devices. Compliance with these requirements provides a reason-
able level of assurance that your use of this product in a residential
environment will not result in harmful interference with other elec-
tronic devices. This equipment generates/uses radio frequencies
and, if not installed and used according to the instructions found in
the users manual, may cause interference harmful to the operation
of other electronic devices. Compliance with FCC regulations does
* This applies only to products distributed by YAMAHA CORPORATION OF AMERICA. (class B)
not guarantee that interference will not occur in all installations. If
this product is found to be the source of interference, which can be
determined by turning the unit “OFF” and “ON”, please try to elimi-
nate the problem by using one of the following measures:
Relocate either this product or the device that is being affected by
the interference.
Utilize power outlets that are on different branch (circuit breaker or
fuse) circuits or install AC line filter/s.
In the case of radio or TV interference, relocate/reorient the
antenna. If the antenna lead-in is 300 ohm ribbon lead, change the
lead-in to co-axial type cable.
If these corrective measures do not produce satisfactory results,
please contact the local retailer authorized to distribute this type of
product. If you can not locate the appropriate retailer, please con-
tact Yamaha Corporation of America, Electronic Service Division,
6600 Orangethorpe Ave, Buena Park, CA90620
The above statements apply ONLY to those products distributed by
Yamaha Corporation of America or its subsidiaries.
FCC INFORMATION (U.S.A.)
IMPORTANT NOTICE FOR THE UNITED KINGDOM
Connecting the Plug and Cord
WARNING: THIS APPARATUS MUST BE EARTHED
IMPORTANT. The wires in this mains lead are coloured in accordance
with the following code:
GREEN-AND-YELLOW : EARTH
BLUE : NEUTRAL
BROWN : LIVE
As the colours of the wires in the mains lead of this apparatus may not
correspond with the coloured markings identifying the terminals in
your plug proceed as follows:
The wire which is coloured GREEN-and-YELLOW must be connected
to the terminal in the plug which is marked by the letter E or by the
safety earth symbol or colored GREEN or GREEN-and-YELLOW.
The wire which is coloured BLUE must be connected to the terminal
which is marked with the letter N or coloured BLACK.
The wire which is coloured BROWN must be connected to the termi-
nal which is marked with the letter L or coloured RED.
This applies only to products distributed by Yamaha-Kemble Music (U.K.) Ltd. (3 wires)
5
Controls and Connectors
Front Panel
1 POWER ON/OFF Switch
After connecting the PW5000 to the PM5000 console
using the cable supplied with the PM5000, and after
plugging the PW5000 power cord into an appropriate AC
outlet, use this switch to turn power to the PM5000 ON
or OFF.
2 OPERATION MONITOR
Displays the status of the four independent power supply
lines to the PM5000. The green NORMAL indicators
light when operation is normal. If abnormal operation is
detected on any supply line, the red CAUTION indicator
for that line will light, and the corresponding supply may
shut down. The CAUTION indicator will remain lit even
if the supply is shut down. If this happens, note which
CAUTION indicator was lit, turn the POWER ON/OFF
switch OFF, and contact your Yamaha dealer or
maintenance personnel.
3 HIGH Indicator
This indicator lights when the unit’s cooling fan is
operating at its highest speed. High-speed operation can
be activated by either of the following conditions:
• The FAN SPEED switch is set to HIGH.
• The FAN SPEED switch is set to AUTO and the
PW5000’s internal temperature exceeds a preset
threshold (in this case the THERMAL indicator will also
light).
4 STOP Indicator
This indicator will light if the unit’s cooling fan stops
operating.
5 THERMAL Indicator
Lights if the PW5000 internal temperature exceeds a
preset threshold. If this occurs it is possible that the
unit’s cooling efficiency is being adversely affected by
the setup location or other external conditions. Check
your installation and revise if necessary to allow
unimpeded airflow to and from the unit’s vents.
6 LINE VOLTAGE Display
Displays the current AC line voltage. The AC voltage is
continuously displayed as long as the PW5000 is
plugged into an active AC outlet, regardless of the
POWER ON/OFF switch setting.
7 FAN SPEED Switch
Sets the speed or operational mode of the cooling fan.
When set to AUTO the speed of the fan will
automatically be adjusted in three stages according to
the unit’s internal temperature. The THERMAL
indicator will light when the highest speed is activated.
When set to HIGH the fan will operate continuously at
the highest speed, regardless of the unit’s internal
temperature.
Never obstruct the cooling vents located on the
front and rear panels of the PW5000.
NORMAL
CAUTION
+16 -16 +12 +48
HIGH
STOP THERMAL
POWER
ON OFF
OPERATION MONITOR FAN LINE VOLTAGE
FAN SPEED
AUTO HIGH
POWER SUPPLY
1 2 3 4 7 5 6
6
Rear Panel
8 DC PARALLEL INPUT Connector
This connector is used to connect two PW5000 units in
parallel. Two PW5000’s can be connected in this way to
distribute the power load, thus reducing the load on each
unit, and to ensure uninterrupted failsafe operation in the
even that one unit shuts down.
Use only the optional PSL5000 Power Supply Link
Cable for this connection. Rotate the connector ring to
the left to connect, or to the right to disconnect.
9 DC OUTPUT Connector
Use this connector to connect the PW5000 to the
PM5000 console. When using parallel-connected
PW5000 units, this connector connects to the DC
PARALLEL INPUT connector on the main PW5000
unit. Always use the cable supplied with the PM5000
console to connect the PW5000 to the console.
A second PW5000 should be parallel-connected to the
main PW5000 only using the optional PSL5000 Power
Supply Link Cable. Rotate the connector ring to the left
to connect, or to the right to disconnect.
) EARTH Screw Terminal
For maximum safety be sure to securely attach a
confirmed earth line to this terminal. An earth line is also
included in the power supply cable, so the unit will be
properly earthed if the AC outlet used is earthed. If the
AC outlet is not earthed be sure to properly connect the
EARTH terminal. Proper earthing not only ensures
safety, but it also guarantees minimum noise from hum
and interference.
Rack-mounting holes are provided near the rear
edges of the side panels. When rack-mounting the
PW5000, be sure to use mounting hardware that is
the correct size for the rack, and attach securely at
both the front and rear ends of the unit.
Parallel-connected PW5000 Power Supplies
13.5A
13.5A
14.0A
1.0A
5000
9,10,14,15
1,2,4,5
22,23,25,26,27
19
8) 9
PM5000 PW5000 PW5000
DC
OUTPUT
DC
OUTPUT
DC PARALLEL
INPUT
Optional PSL5000 power Supply Link Cable.
7
Dimensions
Specifications
General Specifications
Power Connector Pin Diagram (DC OUTPUT)
* DC OUTPUT connector as seen from the rear panel.
DC PARALLEL INPUT pin assignments are flipped
horizontally.
Power Supply Cable Pin Assignments
Specifications and descriptions in this owner’s manual are for
information purposes only. Yamaha Corporation reserves the right
to change or modify products or specifications at any time
without prior notice. Since specifications, equipment, or options
may not be the same in every locale, please check with your
Yamaha dealer.
European models
Purchaser/User Information specified in EN55103-1 and
EN55103-2.
Inrush Current: 55A
Conforms to Environments: E1, E2, E3 and E4
50
168434
459
24557
345
480
186
176
391
(mm)
Power Supply
U.S./Canada: 120 V, 60 Hz
Australia: 240 V, 50 Hz
Other: 230 V, 50 Hz
Power Consumption
U.S./Canada: 1100 W, 1250 VA
Other: 1100W
Dimensions (W x H x D) 480 mm x 186 mm x 459 mm
Weight 34 kg
Cooling Fan Speed Settings
HIGH (continuous operation at max.),
AUTO (3-speed automatic)
123
4567
8
9101112
131415161718
1920
24
25
27
26
212223
No. Function No. Function
1 -16V 15 +16V
2 -16V 16 ±16V GND
3 FRAME GND 17 +12V GND
4 -16V 18 +12V GND
5 -16V 19 +48V
6 ±16V GND 20 PW CAUTION
7 +12V GND 21 ±16V GND
8 REMOTE 22 +12V
9 +16V 23 +12V
10 +16V 24 +48V GND
11 ±16V GND 25 +12V
12 +12V GND 26 +12V
13 REMOTE 27 +12V
14 +16V
For details of products, please contact your nearest Yamaha
representative or the authorized distributor listed below.
Pour plus de détails sur les produits, veuillez-vous adresser à Yamaha ou
au distributeur le plus proche de vous figurant dans la liste suivante.
Die Einzelheiten zu Produkten sind bei Ihrer unten aufgeführten
Niederlassung und bei Yamaha Vertragshändlern in den jeweiligen
Bestimmungsländern erhältlich.
Para detalles sobre productos, contacte su tienda Yamaha más cercana
o el distribuidor autorizado que se lista debajo.
CANADA
Yamaha Canada Music Ltd.
135 Milner Avenue, Scarborough, Ontario,
M1S 3R1, Canada
Tel: 416-298-1311
U.S.A.
Yamaha Corporation of America
6600 Orangethorpe Ave., Buena Park, Calif. 90620,
U.S.A.
Tel: 714-522-9011
MEXICO
Yamaha de Mexico S.A. De C.V.,
Departamento de ventas
Javier Rojo Gomez No.1149, Col. Gpe Del
Moral, Deleg. Iztapalapa, 09300 Mexico, D.F.
Tel: 55-5804-0600
BRAZIL
Yamaha Musical do Brasil LTDA.
Av. Rebouças 2636, São Paulo, Brasil
Tel: 011-3085-1377
ARGENTINA
Yamaha Music Latin America, S.A.
Sucursal de Argentina
Viamonte 1145 Piso2-B 1053,
Buenos Aires, Argentina
Tel: 1-4371-7021
PANAMA AND OTHER LATIN
AMERICAN COUNTRIES/
CARIBBEAN COUNTRIES
Yamaha Music Latin America, S.A.
Torre Banco General, Piso 7, Urbanización Marbella,
Calle 47 y Aquilino de la Guardia,
Ciudad de Panamá, Panamá
Tel: +507-269-5311
THE UNITED KINGDOM
Yamaha-Kemble Music (U.K.) Ltd.
Sherbourne Drive, Tilbrook, Milton Keynes,
MK7 8BL, England
Tel: 01908-366700
GERMANY
Yamaha Music Central Europe GmbH
Siemensstraße 22-34, 25462 Rellingen, Germany
Tel: 04101-3030
SWITZERLAND/LIECHTENSTEIN
Yamaha Music Central Europe GmbH,
Branch Switzerland
Seefeldstrasse 94, 8008 Zürich, Switzerland
Tel: 01-383 3990
AUSTRIA
Yamaha Music Central Europe GmbH,
Branch Austria
Schleiergasse 20, A-1100 Wien, Austria
Tel: 01-60203900
THE NETHERLANDS
Yamaha Music Central Europe,
Branch Nederland
Clarissenhof 5-b, 4133 AB Vianen, The Netherlands
Tel: 0347-358 040
BELGIUM/LUXEMBOURG
Yamaha Music Central Europe GmbH,
Branch Belgium
Rue de Geneve (Genevastraat) 10, 1140 - Brussels,
Belgium
Tel: 02-726 6032
FRANCE
Yamaha Musique France
BP 70-77312 Marne-la-Vallée Cedex 2, France
Tel: 01-64-61-4000
ITALY
Yamaha Musica Italia S.P.A.
Combo Division
Viale Italia 88, 20020 Lainate (Milano), Italy
Tel: 02-935-771
SPAIN/PORTUGAL
Yamaha-Hazen Música, S.A.
Ctra. de la Coruna km. 17, 200, 28230
Las Rozas (Madrid), Spain
Tel: 91-639-8888
SWEDEN
Yamaha Scandinavia AB
J. A. Wettergrens Gata 1
Box 30053
S-400 43 Göteborg, Sweden
Tel: 031 89 34 00
DENMARK
YS Copenhagen Liaison Office
Generatorvej 8B
DK-2730 Herlev, Denmark
Tel: 44 92 49 00
NORWAY
Norsk filial av Yamaha Scandinavia AB
Grini Næringspark 1
N-1345 Østerås, Norway
Tel: 67 16 77 70
OTHER EUROPEAN COUNTRIES
Yamaha Music Central Europe GmbH
Siemensstraße 22-34, 25462 Rellingen, Germany
Tel: +49-4101-3030
Yamaha Corporation,
Asia-Pacific Music Marketing Group
Nakazawa-cho 10-1, Hamamatsu, Japan 430-8650
Tel: +81-53-460-2313
TURKEY/CYPRUS
Yamaha Music Central Europe GmbH
Siemensstraße 22-34, 25462 Rellingen, Germany
Tel: 04101-3030
OTHER COUNTRIES
Yamaha Music Gulf FZE
LB21-128 Jebel Ali Freezone
P.O.Box 17328, Dubai, U.A.E.
Tel: +971-4-881-5868
INDONESIA
PT. Yamaha Music Indonesia (Distributor)
PT. Nusantik
Gedung Yamaha Music Center, Jalan Jend. Gatot
Subroto Kav. 4, Jakarta 12930, Indonesia
Tel: 21-520-2577
KOREA
Yamaha Music Korea Ltd.
Tong-Yang Securities Bldg. 16F 23-8 Yoido-dong,
Youngdungpo-ku, Seoul, Korea
Tel: 02-3770-0660
MALAYSIA
Yamaha Music Malaysia, Sdn., Bhd.
Lot 8, Jalan Perbandaran, 47301 Kelana Jaya,
Petaling Jaya, Selangor, Malaysia
Tel: 3-78030900
SINGAPORE
Yamaha Music Asia Pte., Ltd.
No.11 Ubi Road 1, No.06-02,
Meiban Industrial Building, Singapore
Tel: 747-4374
TAIWAN
Yamaha KHS Music Co., Ltd.
3F, #6, Sec.2, Nan Jing E. Rd. Taipei.
Taiwan 104, R.O.C.
Tel: 02-2511-8688
THAILAND
Siam Music Yamaha Co., Ltd.
121/60-61 RS Tower 17th Floor,
Ratchadaphisek RD., Dindaeng,
Bangkok 10320, Thailand
Tel: 02-641-2951
THE PEOPLE’S REPUBLIC OF CHINA
Yamaha Music & Electronics (China) Co., Ltd.
Shanghai Branch
United Plaza 25F 1468 Nan Jing Road West
Jingan Shanghai 200040, China
Tel: 21-6247-2211
OTHER ASIAN COUNTRIES
Yamaha Corporation,
Asia-Pacific Music Marketing Group
Nakazawa-cho 10-1, Hamamatsu, Japan 430-8650
Tel: +81-53-460-2313
AUSTRALIA
Yamaha Music Australia Pty. Ltd.
Level 1, 99 Queensbridge Street, Southbank,
Victoria 3006, Australia
Tel: 3-9693-5111
COUNTRIES AND TRUST
TERRITORIES IN PACIFIC OCEAN
Yamaha Corporation,
Asia-Pacific Music Marketing Group
Nakazawa-cho 10-1, Hamamatsu, Japan 430-8650
Tel: +81-53-460-2313
NORTH AMERICA
CENTRAL & SOUTH AMERICA
EUROPE
AFRICA
MIDDLE EAST
ASIA
OCEANIA
HEAD OFFICE Yamaha Corporation, Pro Audio & Digital Musical Instrument Division
Nakazawa-cho 10-1, Hamamatsu, Japan 430-8650
Tel: +81-53-460-2441
PA07
M.D.G., Pro Audio & Digital Musical lnstrument Division, Yamaha Corporation
© 2003 Yamaha Corporation
WA54220 0306MWAP5.1-01A0
Printed in Japan
Yamaha Manual Library
http://www2.yamaha.co.jp/manual/english/
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

Yamaha PW5000 Användarmanual

Kategori
Kompletterande musikutrustning
Typ
Användarmanual