MikroTik CRS326 24S 2Q RM Cloud Router Switch Användarmanual

Stämpla: MikroTik

Modell: CRS326 24S 2Q RM Cloud Router Switch

Typ: Användarmanual

Denna manual är också lämplig för

CRS326-24S+2Q+RM

The CRS326 is a network switch with 24 10G SFP+ ports and two QSFP+ 40G ports. The device is ready to use as

a switch.

Quick start

• Mount unit or place on the flat surface, please see Mounting paragraph for instructions.

• Choose your powering solution, please see Powering section for possibilities.

• The Initial connection has to be done via the Ethernet cable, using the MikroTik Winbox utility.

• Use Winbox to connect to the default IP address of 192.168.88.1 from any port, with the username admin

and no password, the device is set up as a switch.

• We recommend clicking the “Check for updates” button and updating your system software to the latest

version to ensure the best performance and stability.

• Set up your password to secure the device.

Mounting

The device is designed to use indoors and it can be mounted in a rackmount enclosure using provided rack

mounts, or it can be placed on the desktop. Please attach rubber pegs on the bottom of the router if the desired

placement is on the flat surface or use a Phillips screwdriver to attach rackmount ears on both sides of the device if

designated use is for rackmount enclosure:

1. Attach rack ears to both sides of the device and tighten four screws to secure them in place, as

shown in the picture.

2. Place the device in rackmount enclosure and align with the holes so that the device fits

conveniently.

3. Tighten screws to secure it in place.

The IP rating scale for this device is IPX0. The device has no protection from water contamination, please ensure

the placement of the device in a dry and ventilated environment.

Mounting and configuration of this device should be done by a qualified person. We recommend using Cat5/6

cables for our devices.

See mikrotik.com/products for the latest version of this document. Document #49424 Modified on: 06.AUG.2019

Powering

The device accepts powering from two inputs of 100 – 240 V AC ⏦.

The power consumption of this device under maximum load is up to 42 W. With attachments up to 69 W.

Booting process

The device supports booting RouterOS (for complete routing and switching configuration) or SwOS (for only using

as a switch). By default, the device will boot RouterOS, but you can reboot into the other operating system in the

following ways:

• From SwOS: In the System menu, click “Boot RouterOS” button on the bottom of the page.

• From RouterOS: in the System, RouterBOARD menu, click “Settings” and there select “Boot OS”.

It is also possible to select the OS and configure other boot settings via the serial console menu.

Configuration

Serial console for configuration is an RS-232 serial port, set by default to 115200 bit/s, 8 data bits, 1 stop bit, no

parity. Standard RJ45 to COM cable can be used. To find detailed serial console configuration and pinout please

visit serial console section in our wiki pages here: https://wiki.mikrotik.com/wiki/Manual:System/Serial_Console

RouterOS and SwOS include many configuration options in addition to what is described in this document. We

suggest starting here to get yourself accustomed to the possibilities: http://mt.lv/help. In case the IP connection is

not available, the Winbox tool (http://mt.lv/winbox) can be used to connect to the MAC address of the device.

Extension slots and ports

• Twenty four 10G SFP+ ports.

• Two 40G QSFP+ ports.

• 1x RJ45 console port (set at 115200bits/s, 8 data bits, 1 stop bit no parity).

• 1x 10/100Mbit Ethernet port for management access.

• USB type-A port.

• Three cooling fans with automatic speed control.

• Two integrated power supply units with AC ⏦ inputs for redundancy.

Please visit wiki pages for MikroTik SFP module compatibility and configuration table:

https://wiki.mikrotik.com/wiki/MikroTik_SFP_module_compatibility_table

Reset button

The RouterBOOT reset button has the following functions. Press the button and apply the power, then:

• Release the button when green LED starts flashing, to reset RouterOS configuration to defaults.

• Release the button when the LED turns solid green to clear all configuration and defaults.

• Release the button after LED is no longer lit (~20 seconds) to cause a device to look for Netinstall servers

(required for reinstalling RouterOS over the network).

Regardless of the above option used, the system will load the backup RouterBOOT loader if the button is pressed

before power is applied to the device. Useful for RouterBOOT debugging and recovery.

Accessories

Package includes the following accessories that come with the device:

• K-10 Fastening set for rackmount case.

• White rackmount bracket – 2 pcs.

• EU/US power cord, AC D03+QT3 H05VV-F 3x0.75mm2, 1.83m RoHS – 2 pcs.⏦

See mikrotik.com/products for the latest version of this document. Document #49424 Modified on: 06.AUG.2019

Specifications

For more information about this product, specification and pictures please visit our web page:

https://mikrotik.com/product/crs326_24s_2q_rm

Operating system support

The device supports dual boot SwOS software version 2.9 and RouterOS v6. The specific factory-installed version

number is indicated in the RouterOS menu /system resource. Other operating systems have not been tested.

Safety Notice

Electric shock hazard. This equipment is to be serviced by trained personnel only.

MikroTik mobile app

Use the MikroTik smartphone app to configure your router in the field, or to apply the most basic initial settings for

your MikroTik home access point. Scan QR code and choose your preferred OS.

See mikrotik.com/products for the latest version of this document. Document #49424 Modified on: 06.AUG.2019

Federal Communication Commission Interference Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15

of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a

residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by turning the equipment off and on, the user

is encouraged to try to correct the interference by one of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could

void the user’s authority to operate this equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This

device may not cause harmful interference, and (2) this device must accept any interference received, including

interference that may cause undesired operation.

Note: This unit was tested with shielded cables on the peripheral devices. Shielded cables must be used with the

unit to ensure compliance.

Industry Canada

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following

two conditions: (1) this device may not cause interference, and (2) this device must accept any interference,

including interference that may cause undesired operation of the device.

Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.

L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2)

l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en

compromettre le fonctionnement.

See mikrotik.com/products for the latest version of this document. Document #49424 Modified on: 06.AUG.2019

CE Declaration of Conformity

Manufacturer: Mikrotikls SIA, Brivibas gatve 214i Riga, Latvia, LV1039.

BG С настоящото Mikrotīkls SIA декларира, че този тип радиосъоръжение RouterBOARD е в съответствие с Директива 2014/53/ЕС.

Цялостният текст на ЕС декларацията за съответствие може да се намери на следния интернет адрес: https://mikrotik.com/products

CS Tímto Mikrotīkls SIA prohlašuje, že typ rádiového zařízení RouterBOARD je v souladu se směrnicí 2014/53/EU. Úplné znění EU prohlášení o

shodě je k dispozici na této internetové adrese: https://mikrotik.com/products

DA Hermed erklærer Mikrotīkls SIA , at radioudstyrstypen RouterBOARD er i overensstemmelse med direktiv 2014/53/EU. EU-

overensstemmelseserklæringens fulde tekst kan findes på følgende internetadresse: https://mikrotik.com/products

DE Hiermit erklärt Mikrotīkls SIA , dass der Funkanlagentyp RouterBOARD der Richtlinie 2014/53/EU entspricht. Der vollständige Text der EU-

Konformitätserklärung ist unter der folgenden Internetadresse verfügbar: https://mikrotik.com/products

EL Με την παρούσα ο/η Mikrotīkls SIA , δηλώνει ότι ο ραδιοεξοπλισμός RouterBOARD πληροί την οδηγία 2014/53/ΕΕ. Το πλήρες κείμενο της

δήλωσης συμμόρφωσης ΕΕ διατίθεται στην ακόλουθη ιστοσελίδα στο διαδίκτυο: https://mikrotik.com/products

EN Hereby, Mikrotīkls SIA declares that the radio equipment type RouterBOARD is in compliance with Directive 2014/53/EU. The full text of the

EU declaration of conformity is available at the following internet address: https://mikrotik.com/products

ES Por la presente, Mikrotīkls SIA declara que el tipo de equipo radioeléctrico RouterBOARD es conforme con la Directiva 2014/53/UE. El texto

completo de la declaración UE de conformidad está disponible en la dirección Internet siguiente: https://mikrotik.com/products

ET Käesolevaga deklareerib Mikrotīkls SIA , et käesolev raadioseadme tüüp RouterBOARD vastab direktiivi 2014/53/EL nõuetele. ELi

vastavusdeklaratsiooni täielik tekst on kättesaadav järgmisel internetiaadressil: https://mikrotik.com/products

FI Mikrotīkls SIA vakuuttaa, että radiolaitetyyppi RouterBOARD on direktiivin 2014/53/EU mukainen. EU-vaatimustenmukaisuusvakuutuksen

täysimittainen teksti on saatavilla seuraavassa internetosoitteessa: https://mikrotik.com/products

FR Le soussigné, Mikrotīkls SIA , déclare que l'équipement radioélectrique du type RouterBOARD est conforme à la directive 2014/53/UE. Le

texte complet de la déclaration UE de conformité est disponible à l'adresse internet suivante: https://mikrotik.com/products

HR Mikrotīkls SIA ovime izjavljuje da je radijska oprema tipa RouterBOARD u skladu s Direktivom 2014/53/EU. Cjeloviti tekst EU izjave o

sukladnosti dostupan je na sljedećoj internetskoj adresi: https://mikrotik.com/products

HU Mikrotīkls SIA igazolja, hogy a RouterBOARD típusú rádióberendezés megfelel a 2014/53/EU irányelvnek. Az EU-megfelelőségi nyilatkozat

teljes szövege elérhető a következő internetes címen: https://mikrotik.com/products

IT Il fabbricante, Mikrotīkls SIA , dichiara che il tipo di apparecchiatura radio RouterBOARD è conforme alla direttiva 2014/53/UE. Il testo

completo della dichiarazione di conformità UE è disponibile al seguente indirizzo Internet: https://mikrotik.com/products

IS Hér með lýsir Mikrotīkls SIA yfir því að RouterBOARD er í samræmi við grunnkröfur og aðrar kröfur, sem gerðar eru í tilskipun 2014/53/EU.

Fullur texti ESB samræmisyfirlýsing er að finna á eftirfarandi netfangi: https://mikrotik.com/products

LT Aš, Mikrotīkls SIA , patvirtinu, kad radijo įrenginių tipas RouterBOARD atitinka Direktyvą 2014/53/ES. Visas ES atitikties deklaracijos tekstas

prieinamas šiuo interneto adresu: https://mikrotik.com/products

LV Ar šo Mikrotīkls SIA deklarē, ka radioiekārta RouterBOARD atbilst Direktīvai 2014/53/ES. Pilns ES atbilstības deklarācijas teksts ir pieejams

šādā interneta vietnē: https://mikrotik.com/products

MT B'dan, Mikrotīkls SIA , niddikjara li dan it-tip ta' tagħmir tar-radju RouterBOARD huwa konformi mad-Direttiva 2014/53/UE. It-test kollu tad-

dikjarazzjoni ta' konformità tal-UE huwa disponibbli f'dan l-indirizz tal-Internet li ġej: https://mikrotik.com/products

NL Hierbij verklaar ik, Mikrotīkls SIA , dat het type radioapparatuur RouterBOARD conform is met Richtlijn 2014/53/EU. De volledige tekst van

de EU-conformiteitsverklaring kan worden geraadpleegd op het volgende internetadres: https://mikrotik.com/products

NO Mikrotīkls SIA erklærer herved at utstyret RouterBOARD er i samsvar med de grunnleggende krav og øvrige relevante krav i direktiv

2014/53/EU. Den fulle teksten til EU-samsvarserklæringen er tilgjengelig på følgende internettadresse: https://mikrotik.com/products

PL Mikrotīkls SIA niniejszym oświadcza, że typ urządzenia radiowego RouterBOARD jest zgodny z dyrektywą 2014/53/UE. Pełny tekst

deklaracji zgodności UE jest dostępny pod następującym adresem internetowym: https://mikrotik.com/products

PT O(a) abaixo assinado(a) Mikrotīkls SIA declara que o presente tipo de equipamento de rádio RouterBOARD está em conformidade com a

Diretiva 2014/53/UE. O texto integral da declaração de conformidade está disponível no seguinte endereço de Internet:

https://mikrotik.com/products

RO Prin prezenta, Mikrotīkls SIA declară că tipul de echipamente radio RouterBOARD este în conformitate cu Directiva 2014/53/UE. Textul

integral al declarației UE de conformitate este disponibil la următoarea adresă internet: https://mikrotik.com/products

SK Mikrotīkls SIA týmto vyhlasuje, že rádiové zariadenie typu RouterBOARD je v súlade so smernicou 2014/53/EÚ. Úplné EÚ vyhlásenie o

zhode je k dispozícii na tejto internetovej adrese: https://mikrotik.com/products

SL Mikrotīkls SIA potrjuje, da je tip radijske opreme RouterBOARD skladen z Direktivo 2014/53/EU. Celotno besedilo izjave EU o skladnosti je

na voljo na naslednjem spletnem naslovu: https://mikrotik.com/products

SV Härmed försäkrar Mikrotīkls SIA att denna typ av radioutrustning RouterBOARD överensstämmer med direktiv 2014/53/EU. Den fullständiga

texten till EU-försäkran om överensstämmelse finns på följande webbadress: https://mikrotik.com/products

Note. Information contained here is subject to change. Please visit the product page on www.mikrotik.com for the most up to date version of this

document.

See mikrotik.com/products for the latest version of this document. Document #49424 Modified on: 06.AUG.2019

BG. Инструкция: Свържете адаптера на захранване, за да включите устройството. Отворете 192.168.88.1 в уеб браузър, за да
настроите продукта. Повече информация в http://mt.lv/help-bg
CS. Návod k použití: Připojte  napájecí adaptér k  zapnutí  přístroje.  Otevřete 192.168.88.1  ve webovém prohlížeči  pro konfiguraci produktu.
Více informací najdete v http://mt.lv/help-cs
DA. Instruktionsbog: Tilslut strømadapteren for at tænde for enheden. Åbn 192.168.88.1 i en webbrowser til at konfigurere produktet. Mere
information i http://mt.lv/help-da
DE. Bedienungsanleitung: Verbinden Sie das Netzteil, um das Gerät einzuschalten. Öffnen Sie 192.168.88.1 in einem Web-Browser, um das
Produkt zu konfigurieren.  Weitere Informationen im http://mt.lv/help-de
EL. εγχειρίδιο οδηγιών: Συνδέστε τον προσαρμογέα τροφοδοσίας για να ενεργοποιήσετε τη μονάδα. Ανοίξτε 192.168.88.1 σε ένα πρόγραμμα
περιήγησης στο Web για να διαμορφώσετε το προϊόν. Περισσότερες πληροφορίες στο http://mt.lv/help-el
EN. Instruction manual:  Connect the power adapter to turn on the device. Open 192.168.88.1 in your web browser, to configure it. More
information on http://mt.lv/help
ES. Manual de instrucciones: Conecte el adaptador de alimentación para encender la unidad. Abra 192.168.88.1 en un navegador web para
configurar el producto. Más información en http://mt.lv/help-es
ET.  Kasutusjuhend: Ühendage  toiteadapter  seadme  sisselülitamiseks.  Avatud  192.168.88.1  in  veebilehitseja  seadistada  toodet.  Rohkem
teavet http://mt.lv/help-et
FI. Käyttöohje: Kytke virtalähde päälle laitteen. Avaa 192.168.88.1 in selaimen määrittää tuotteen. Lisää tietoa http://mt.lv/help-fi
FR.   Mode   d'emploi:   Connectez   l'adaptateur  d'alimentation  pour   allumer  l'appareil.  Ouvrez  192.168.88.1  dans   un   navigateur  Web  pour
configurer le produit. Plus d'informations dans http://mt.lv/help-fr
HR. Uputa za uporabu: Priključite napajanje i uključite uređaj. Za konfiguraciju uređaja u pregledniku otvorite 192.168.88.1. Više informacija je
na http://mt.lv/help-hr
HU.  Használati utasítás:  Csatlakoztassa a hálózati  adaptert  a készülék bekapcsolásához.  Megnyitása  192.168.88.1  egy webböngészőben
beállítani a terméket. Több információ http://mt.lv/help-hu
IT. Manuale di istruzioni: Collegare l'adattatore di alimentazione per accendere l'unità. Aprire 192.168.88.1 in un browser Web per configurare
il prodotto. Maggiori informazioni in http://mt.lv/help-it
IS. Notkunarhandbók: Tengdu  straumbreytirinn til að  kveikja á  tækinu.  Opnaðu 192.168.88.1 í vafranum þínum til að  stilla það. Nánari
upplýsingar á http://mt.lv/help-is
NO.  Instruksjonsmanual:  Koble  strømadapteren  for   å  slå på enheten.  Åpne  192.168.88.1  i  nettleseren din  for å  konfigurere  den.  Mer
informasjon på http://mt.lv/help-no
LT.  Naudojimosi instrukcija:  Prijunkite  maitinimo adapterį  įjunkite įrenginį.  Į interneto  naršyklę  192.168.88.1  Atidarykite  galite konfigūruoti
gaminį. Daugiau informacijos rasite http://mt.lv/help-lt
LV. Lietošanas instrukcija: Pievienojiet Strāvas adapteri, lai ieslēgtu ierīci. Atvērt 192.168.88.1 ar interneta pārlūku, lai konfigurētu produktu.
Plašāka informācija http://mt.lv/help-lv
MT.  Manwal   tal-istruzzjoni:   Qabbad   l-adapter tal-qawwa   biex   iddawwar   it-tagħmir.  Iftaħ  192.168.88.1   fil-web   browser   tiegħek,  biex  jiġi
kkonfigurat. Aktar informazzjoni fuq http://mt.lv/help-mt
NL. Handleiding:  Sluit  voedingsadapter  aan  op  het  apparaat in te schakelen.  Open  192.168.88.1  in  een webbrowser om  het  product te
configureren. Meer informatie in http://mt.lv/help-nl
PL.   Instrukcja   obsługi:  Podłącz  adapter  zasilania,   aby   włączyć  urządzenie.  Otwórz  192.168.88.1  w   przeglądarce   internetowej,   aby
skonfigurować urządzenie. Więcej informacji w http://mt.lv/help-pl
PT. Manual de instruções: Conecte o adaptador de alimentação para ligar o aparelho. Abra 192.168.88.1  em um navegador da  web para
configurar o produto. Mais informações em http://mt.lv/help-pt
RO. Instrucțiuni de utilizare: Conectați adaptorul de alimentare pentru a porni aparatul. Deschide 192.168.88.1 într-un browser web pentru a
configura produsul. Mai multe informații în http://mt.lv/help-ro
SK. Navodila: Priključite napajalnik za vklop naprave. Odprite 192.168.88.1 v spletnem brskalniku nastaviti izdelek. Več informacij v 
http://mt.lv/help-sk
SL. Návod na použitie: Pripojte napájací adaptér k zapnutiu prístroja. Otvorte 192.168.88.1 vo webovom prehliadači pre konfiguráciu produktu.
Viac informácií nájdete v http://mt.lv/help-sl
SV.  Instruktionsmanual:  Anslut nätadaptern för att slå på enheten.  Öppna 192.168.88.1 i en webbläsare  för att konfigurera produkten. Mer
information på http://mt.lv/help-sv
NO.  Bruksanvisningen:  Koble  strømadapteren  for  å  slå på  enheten.  Åpne  192.168.88.1  i  en nettleser for å  konfigurere produktet.  Mer
informasjon på http://mt.lv/help-no
RU. Руководство по эксплуатации: подключите адаптер питания чтобы включить устройство. Откройте 192.168.88.1 в своем
веб-браузере для конфигурации. Дополнительная информация http://mt.lv/help-ru
CN. 说明书。   连接电源适配器以打开设备。在Web 浏览器中打开192.168.88.1  进行配置。 有关http://mt.lv/help-zh 的更多信息
See mikrotik.com/products for the latest version of this document. Document #49424 Modified on: 06.AUG.2019