Yamaha CVP-505 Bruksanvisning

CVP-509 / 505 / 503 / 501

Reference Manual

This Reference Manual explains advanced features of the CVP-509/505/503/501 that are not

explained in the Owner's Manual. Please read the Owner's Manual first, before reading this

Reference Manual.

EN

2 CVP-509/505/503/501 Reference Manual

Contents

1 Perform the piano songs by Clavinova 3

2 Voices

– Playing the Keyboard – 3

Voice Characteristics ......................................................... 3

Selecting GM/XG or Other Voices from the Panel............. 4

Selecting the Harmony/Echo type...................................... 5

Pitch-Related Settings ....................................................... 7

Editing Voices (Voice Set) ................................................. 9

Editing Organ Flutes Parameters..................................... 15

3 Styles

– Playing Rhythm and Accompaniment – 16

Selecting the Chord Fingering Type ................................ 16

Style Playback Related Settings ...................................... 18

Split Point Settings........................................................... 20

Memorizing the Original One Touch Setting .................... 21

Creating/Editing Styles (Style Creator) ............................ 22

4 Songs

– Recording Your Performances and Creating Songs –

36

Editing Music Notation Settings ....................................... 36

Editing Lyrics/Text Display Settings .......... 39

Using the Auto Accompaniment Features with the Song

Playback .......................................................................... 40

Song Playback Related Parameters (Repeat settings,

Channel settings, Guide Function)................................... 41

Creating/Editing Songs (Song Creator) ........................... 45

5 Music Finder

– Calling Up Ideal Setups (Voice, Style, etc.) for Each Song –

61

Creating a Set of Favorite Records.................................. 61

Editing Records................................................................ 62

Saving the Record as a Single File.................................. 63

Viewing Record Information on the Internet

(MUSIC FINDER Plus)..................................................... 64

6 Registration Memory

– Saving and Recalling Custom Panel Setups –

65

Disabling Recall of Specific Items (Freeze) ..................... 65

Calling Up Registration Memory Numbers in Order

(Registration Sequence) .................................................. 66

7 USB Audio (CVP-509/505/503)

– Playback and Recording Audio Files – 69

8 Mixing Console

– Editing the Volume and Tonal Balance – 69

Editing VOL/VOICE Parameters ...................................... 69

Editing FILTER Parameters ............................................. 70

Editing TUNE Parameters................................................ 71

Editing EFFECT Parameters ........................................... 72

Editing EQ Parameters .................................................... 74

9 Internet Direct Connection

– Connecting the CVP-509/505/503/501 Directly to the Internet –

76

Editing the Browser Settings............................................ 76

Registering Bookmarks of Your Favorite Pages .............. 77

10 Connections

– Using Your Instrument with Other Devices – 79

Microphone Settings .................................. 79

Footswitch/Foot Controller Settings ................................. 86

MIDI Settings ................................................................... 89

11 Utility

– Making Global Settings – 95

CONFIG1 ......................................................................... 95

CONFIG2 ......................................................................... 97

SCREEN OUT .................................................. 98

MEDIA.............................................................................. 98

OWNER ........................................................................... 99

SYSTEM RESET ........................................................... 100

Index 102

CVP-503CVP-505CVP-509

CVP-505CVP-509

* Each chapter in this Reference Manual corresponds to the relevant chapters in the Owner’s Manual.

• The illustrations and LCD screens as shown in this manual are for instructional purposes only, and may appear somewhat dif-

ferent from those on your instrument.

• The displays are taken from the CVP-509, and in English.

• The company names and product names in this manual are the trademarks or registered trademarks of their respective companies.

Using the PDF manual

•To quickly jump to items and topics of interest, click on the desired items in the “Bookmarks” index to the left

of the main display window. (Click the “Bookmarks” tab to open the index if it is not displayed.)

• Click the page numbers that appear in this manual to go directly to the corresponding page.

• Select “Find” or “Search” from the Adobe Reader “Edit” menu and enter a keyword to locate related informa-

tion anywhere in the document.

NOTE The names and positions of menu items may vary according to the version of Adobe Reader being used.

2

CVP-509/505/503/501 Reference Manual 3

1

Perform the piano songs by

Clavinova

This function is fully explained in the Owner’s Manual. Refer to the corresponding chapter in the Owner’s Man-

ual.

Voices

– Playing the Keyboard –

Contents

Voice Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Selecting GM/XG or Other Voices from the Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Selecting the Harmony/Echo type. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Pitch-Related Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

• Fine-tuning the Pitch of the Entire Instrument . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

• Scale Tuning. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

• Changing the Part Assignment of the TRANSPOSE Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Editing Voices (Voice Set) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

• Editable Parameters in the VOICE SET Displays. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

• Disabling Automatic Selection of Voice Sets (Effects, etc.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Editing Organ Flutes Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

The Voice type and its deﬁning characteristics are indicated above the Voice name in the Voice Selection

display.

Voice Characteristics

S. Articulation2! (CVP-509)

S.Articulation! (CVP-509/505)

MegaVoice (CVP-509/505/503)

See the Owner’s Manual, chapter 2.

Natural! These rich and luscious Voices are comprised mostly of keyboard

instrument sounds and are especially intended for playing piano and

other keyboard parts. They also take full advantage of Yamaha’s

advanced sampling technology such as Stereo Sampling, Dynamic

Sampling, Sustain Sampling, and Key-off Sampling.

Live! These acoustic instrument sounds were sampled in stereo, to produce a

truly authentic, rich sound—full of atmosphere and ambience.

Cool! These Voices capture the dynamic textures and subtle nuances of elec-

tric instruments—thanks to a huge amount of memory and some very

sophisticated programming.

Voices – Playing the Keyboard –

4 CVP-509/505/503/501 Reference Manual

Voices – Playing the Keyboard –

2

The GM/XG Voices cannot be directly called up from the VOICE category selection buttons. However, they

can be called up via panel operation by following the procedure below.

1 In the Main display, select a keyboard part to which you want to call up the desired

Voice.

2 Press one of the VOICE category selection buttons to call up the Voice Selection

display.

3 Press the [8 ▲] (UP) button to call up the Voice categories.

4 Press the [2 ▲] (P2) button to display Page 2.

5 Press the desired [A]–[J] button to call up the Voice Selection display of GM/XG

Voices, GM2 Voices, etc.

NOTE (CVP-509/505) You can ﬁnd the “Legacy” folder in this display. This folder contains previous Yamaha Clavinova Voices (such as CVP-409, 407 etc.) for

data compatibility with other models.

6 Select the desired Voice.

Sweet! These acoustic instrument sounds also beneﬁt from Yamaha’s sophisti-

cated technology—and feature a sound so ﬁnely detailed and natural,

you’ll swear you’re playing the real thing!

Live!Drums (CVP-509) These are high-quality drum sounds taking full advantage of Stereo

Sampling and Dynamic Sampling.

Live!SFX (CVP-509) These are high-quality Latin percussion sounds taking full advantage

of Stereo Sampling and Dynamic sampling. They give you a broader

and more versatile range of Latin percussion than the normal drum

Voices.

Drums Various drum and percussion sounds are assigned to individual keys,

letting you play the sounds from the keyboard.

SFX Various special effect sounds are assigned to individual keys, letting

you play the sounds from the keyboard.

Organ Flutes! This authentic organ Voice lets you use the Voice Set to adjust the var-

ious footages and craft your own original organ sounds. See page 15

for details.

Selecting GM/XG or Other Voices from the Panel

43

CVP-509/505/503/501 Reference Manual 5

Voices – Playing the Keyboard –

2

You can select the desired Harmony/Echo effect from a variety of types.

1 Press the [VOICE EFFECT] button.

2 Turn the Harmony/Echo on by pressing the [I] (HARMONY/ECHO) button.

3 Call up the operation display by pressing the [J] (TYPE SELECT) button.

4 Use the [1 ▲▼]–[3 ▲▼] buttons to select the Harmony/Echo type.

The Harmony/Echo types are divided into the following groups, depending on the particular effect

applied.

■ Harmony Types

When one of the Harmony Types is selected, the Harmony effect is applied to the note played in the right-

hand section of the keyboard according to the type selected above and the chord speciﬁed in the chord

section of the keyboard shown below.

Selecting the Harmony/Echo type

Harmony Types

These types apply the harmony effect to notes played in the right-hand sec-

tion of the keyboard according to the chord speciﬁed in the left-hand section

of the keyboard. (Note that the “1+5” and “Octave” settings are not affected

by the chord.)

Multi Assign Type

This type applies a special effect to chords played in the right-hand section

of the keyboard.

Echo Types

These types apply echo effects to notes played in the right-hand section of

the keyboard in time with the currently set tempo.

Split Point

(for the Voice)

LEFT Voice and chord section

for Harmony effect

RIGHT 1 and 2 Voices

Chord section for Style playback

and Harmony effect

Chord section for

Style playback and

Harmony effect

Split Point

(for Style playback)

Split Point

LEFT Voice

RIGHT 1 and 2

Voices

6 CVP-509/505/503/501 Reference Manual

Voices – Playing the Keyboard –

2

■ Multi Assign Type

The Multi Assign effect automatically assigns notes played simultaneously on the right-hand section of the

keyboard to separate parts (Voices). Both of the keyboard part [RIGHT 1] and [RIGHT 2] should be turn

on when using the Multi Assign effect. The Right 1 and Right 2 Voices are alternately assigned to the notes

in the order you play.

■ Echo Types

When one of the Echo Types is selected, the corresponding effect (echo, tremolo, trill) is applied to the

note played in the right-hand section of the keyboard in time with the currently set tempo, regardless of the

[ACMP ON/OFF] and the LEFT part on/off status. Keep in mind that Trill works when you hold down two

notes on the keyboard simultaneously (last two notes if more than two notes are held), and it plays those

notes alternately.

5 Use the [4 ▲▼]–[8 ▲▼] buttons to select various Harmony/Echo settings.

The available settings differ depending on the Harmony/Echo type.

[4 ▲▼]VOLUME This parameter is available for all types with the exception of “Multi

Assign.” It determines the level of the harmony/echo notes generated by

the Harmony/Echo effect.

[5 ▲▼] SPEED This parameter is only available when Echo, Tremolo, or Trill is selected

in Type above. It determines the speed of the Echo, Tremolo, and Trill

effects.

[6 ▲▼] ASSIGN This parameter is available for all types with the exception of “Multi

Assign.” This lets you determine the keyboard part via which the har-

mony/echo notes will be sounded.

[7 ▲▼] CHORD NOTE

ONLY

This parameter is available when one of the Harmony Types is selected.

When this is set to “ON,” the Harmony effect is applied only to the note

(played in the right-hand section of the keyboard) that belongs to a chord

played in the chord section of the keyboard.

[8 ▲▼]TOUCH LIMIT This parameter is available for all types with the exception of “Multi

Assign.” It determines the lowest velocity value at which the harmony

note will sound. This allows you to selectively apply the harmony by your

playing strength, letting you create harmony accents in the melody. The

harmony effect is applied when you play the key strongly (above the set

value).

CVP-509/505/503/501 Reference Manual 7

Voices – Playing the Keyboard –

2

Fine-tuning the Pitch of the Entire Instrument

You can ﬁne-tune the pitch of the entire instrument—useful when you play the Clavinova along with other

instruments or CD music. Please note that the Tune function does not affect the Drum Kit or SFX Kit Voices

and audio ﬁles.

1 Call up the operation display.

[FUNCTION] → [A] MASTER TUNE/SCALE TUNE → TAB [E][F] MASTER TUNE

2 Use the [4 ▲▼]/[5 ▲▼] buttons to set the tuning in 0.2 Hz steps, from 414.8–466.8 Hz.

Press the both 4 or 5’s [

▲

] and [

▼

] buttons simultaneously to reset the value to the factory setting of 440.0 Hz.

Scale Tuning

You can select various scales for playing in custom tunings for speciﬁc historical periods or music genres.

1 Call up the operation display.

[FUNCTION] → [A] MASTER TUNE/SCALE TUNE → TAB [E][F] SCALE TUNE

2 Use the [A]/[B] buttons to select the desired scale.

■ Preset Scale types

Pitch-Related Settings

EQUAL The pitch range of each octave is divided equally into twelve parts, with each

half-step evenly spaced in pitch. This is the most commonly used tuning in

music today.

PURE MAJOR, PURE

MINOR

These tunings preserve the pure mathematical intervals of each scale, espe-

cially for triad chords (root, third, ﬁfth). You can hear this best in actual vocal

harmonies—such as choirs and a cappella singing.

PYTHAGOREAN This scale was devised by the famous Greek philosopher and is created from a

series of perfect ﬁfths, which are collapsed into a single octave. The 3rd in this

tuning are slightly unstable, but the 4th and 5th are beautiful and suitable for

some leads.

MEAN-TONE This scale was created as an improvement on the Pythagorean scale, by making

the major third interval more “in tune.” It was especially popular from the 16th

century to the 18th century. Handel, among others, used this scale.

WERCKMEISTER,

KIRNBERGER

This composite scale combines the Werckmeister and Kirnberger systems,

which were themselves improvements on the mean-tone and Pythagorean

scales. The main feature of this scale is that each key has its own unique char-

acter. The scale was used extensively during the time of Bach and Beethoven,

and even now it is often used when performing period music on the harpsi-

chord.

ARABIC1, ARABIC2 Use these tunings when playing Arabic music.

The tuning of each note for the cur-

rently selected scale is shown.

8 CVP-509/505/503/501 Reference Manual

Voices – Playing the Keyboard –

2

3 Change the following settings as necessary.

NOTE To register the Scale Tune settings to the Registration Memory, be sure to checkmark the SCALE item in the REGISTRATION MEMORY CONTENTS dis-

play.

Changing the Part Assignment of the TRANSPOSE Buttons

You can determine to which parts the TRANSPOSE [-]/[+] buttons are applied.

1 Call up the operation display.

[FUNCTION] → [D] CONTROLLER → TAB [E][F] KEYBOARD/PANEL

2 Use the [A]/[B] buttons to select “2. TRANSPOSE ASSIGN.”

3 Press the [4 ▲▼]/[5 ▲▼] buttons to select the desired transpose type.

You can conﬁrm the setting here by viewing the pop-up window called up via the TRANSPOSE [-]/[+]

buttons.

[2 ▲▼]BASE NOTE Determines the base note for each scale. When the base note is changed,

the pitch of the keyboard is transposed, yet maintains the original pitch

relationship between the notes.

[3 ▲▼]–

[5 ▲▼]

TUNE Select the desired note to be tuned by using the [3 ▲▼] buttons and tune

it in cents by using the [4 ▲▼]/[5 ▲▼] buttons.

NOTE In musical terms a “cent” is 1/100th of a semitone. (100 cents equal one semitone.)

[6 ▲▼]/

[7 ▲▼]

PART SELECT Select the part to which the Scale Tune setting is applied by using the [6

▲▼]/[7 ▲▼] buttons. Then press the [8 ▲] button to add a checkmark or

press the [8 ▼] button to remove the checkmark.

[8 ▲▼] MARK ON/OFF

KEYBOARD When this is selected, the TRANSPOSE [-]/[+] buttons affect the pitch of key-

board played Voices and Style playback (controlled by the performance in the

chord section of the keyboard)—but they do not affect Song playback.

SONG When this is selected, the TRANSPOSE [-]/[+] buttons affect only the pitch of

Song playback.

MASTER When this is selected, the TRANSPOSE [-]/[+] buttons affect the overall pitch

of the instrument, except audio playback.

CVP-509/505/503/501 Reference Manual 9

Voices – Playing the Keyboard –

2

The instrument has a Voice Set feature that allows you to create your own Voices by editing some parameters

of the existing Voices. Once you’ve created a Voice, you can save it as a User Voice to the USER drive or

external devices for future recall.

1 Select the desired Voice (other than an Organ Flutes Voice).

The editing method is different for the ORGAN FLUTES Voices compared to other Voices. For

instructions on editing the ORGAN FLUTES Voices, see page 15.

2 Press the [6 ▲] (VOICE SET) button to call up the VOICE SET display.

3 Use the TAB [E][F] buttons to call up the relevant setting display.

For information on the available parameters in each display, see the “Editable Parameters in the VOICE

SET Displays” on page 10.

4 As necessary, use the [A]/[B] buttons to select the item (parameter) to be edited and

edit the Voice by using the [1 ▲▼]–[8 ▲▼] buttons.

By pressing the [D] (COMPARE) button, you can compare the sound of the edited Voice with the original

(unedited) Voice.

5 Press the [I] (SAVE) button to save your edited Voice as a User Voice.

CAUTION

The settings will be lost if you select another Voice or turn the power to the instrument off without executing the Save operation.

Editing Voices (Voice Set)

5

3

4

10 CVP-509/505/503/501 Reference Manual

Voices – Playing the Keyboard –

2

Editable Parameters in the VOICE SET Displays

The Voice Set parameters are organized into six different displays. The parameters in each display are

described separately, below.

NOTE The available parameters differ depending on the Voice.

■ PIANO Page

This display is available only when the Natural! piano Voice (page

3) is selected.

■

COMMON Page

[1

▲▼

]/

[2

▲▼

]

TUNING

CURVE

Determines the tuning curve. Select “FLAT” if you feel the tuning curve

of the piano Voice does not quite match that of other instruments Voices.

STRETCH: Tuning curve particularly for pianos.

FLAT: Tuning curve in which the frequency is octave doubled over the

entire keyboard range.

[3

▲▼

]/

[4

▲▼

]

KEY OFF

SAMPLE

(CVP-509/505/503)

Adjusts the volume of the key-off sound (the subtle sound that occurs

when you release a key).

[5

▲▼

]/

[6

▲▼

]

SUSTAIN

SAMPLE

(CVP-509/505/503)

Adjusts the depth of sustain sampling for the damper pedal.

[7

▲▼

]/

[8

▲▼

]

STRING

RESONANCE

(CVP-509)

Adjusts the depth of string resonance.

[1

▲▼

]VOLUME Adjusts the volume of the current edited Voice.

[2

▲▼

]/

[3

▲▼

]

TOUCH SENSE Adjusts the touch sensitivity (velocity sensitivity), or how greatly the vol-

ume responds to your playing strength.

DEPTH

Determines the velocity sensitivity, or how much the level of the Voice

changes in response to your playing strength (velocity).

OFFSET

Determines the amount by which received velocities are adjusted for the

actual velocity effect.

0

64 127

64

127

0

64 127

64

127

Actual Velocity for

tone generator

Depth=127 (twice)

Depth=64 (normal)

Depth=32 (half)

Depth=0

TOUCH SENSE DEPTH

Changes to velocity curve according to

VelDepth (with Offset set to 64)

Received Velocity

(Actual KeyOn speed)

TOUCH SENSE OFFSET

Changes to velocity curve according to

VelOffset (with Depth set to 64)

Actual Velocity for

tone generator

Received Velocity

(Actual KeyOn

speed)

Offset=96 (+64)

Offset=127 (+127)

Offset=64 (normal)

Offset=32 (-64)

Offset=0 (-127)

Depends

on offset

Depends

on offset

CVP-509/505/503/501 Reference Manual

11

Voices – Playing the Keyboard –

2

■

CONTROLLER Page

1 CENTER PEDAL

2 LEFT PEDAL

These allow you to select the function to be assigned to the center or left pedal.

3 MODULATION

When a pedal function is assigned to MODULATION, the pedal can be used to modulate the parameters

below as well as the pitch (vibrato). Here, you can set the degree to which the pedal modulates each of the

following parameters.

[4

▲▼

]/

[5

▲▼

]

PART OCTAVE Shifts the octave range of the edited Voice up or down in octaves. When

the edited Voice is used as any of the RIGHT 1–2 parts, the R1/R2 param-

eter is available; when the edited Voice is used as the LEFT part, the

LEFT parameter is available.

[6

▲▼

] MONO/POLY Determines whether the edited Voice is played monophonically or poly-

phonically.

[7

▲▼

] PORTAMENTO

TIME

Sets the portamento time (pitch transition time) when the edited Voice is

set to “MONO” above.

NOTE

The Portamento Time determines the pitch transition time. Portamento is a function that creates a

smooth transition in pitch from the ﬁrst note played on the keyboard to the next.

[1

▲▼

] FUNCTION Selects the function to be assigned to the center or left pedal. For details

on the pedal functions, see page 86.

[2

▲▼

]–

[8

▲▼

]

RIGHT 1,

RIGHT 2, LEFT,

etc.

Determines whether the assigned function is effective or not for the

respective keyboard part. This also determines the depth for the function.

For details, see page 86.

[2

▲▼

] FILTER Determines the degree to which the pedal modulates the Filter Cutoff Fre-

quency. For details about the ﬁlter, see below.

[3

▲▼

] AMPLITUDE Determines the degree to which the pedal modulates the amplitude (vol-

ume).

[5

▲▼

] LFO PMOD Determines the degree to which the pedal modulates the pitch, or the

vibrato effect.

[6

▲▼

] LFO FMOD Determines the degree to which the pedal modulates the Filter modula-

tion, or the wah effect.

[7

▲▼

] LFO AMOD Determines the degree to which the pedal modulates the amplitude, or the

tremolo effect.

12

CVP-509/505/503/501 Reference Manual

Voices – Playing the Keyboard –

2

■ SOUND Page

FILTER

Filter is a processor that changes the timbre or tone of a sound by either blocking or passing a speciﬁc

frequency range. The parameters below determine the overall timbre of the sound by boosting or cutting a

certain frequency range. In addition to making the sound either brighter or mellower, Filter can be used to

produce electronic, synthesizer-like effects.

EG

The EG (Envelope Generator) settings determine how the level of the

sound changes in time. This lets you reproduce many sound

characteristics of natural acoustic instruments—such as the quick

attack and decay of percussion sounds, or the long release of a

sustained piano tone.

VIBRATO

Vibrato is a quavering, vibrating sound effect that is produced by

regularly modulating the pitch of the Voice.

[1 ▲▼] BRIGHT.

(Brightness)

Determines the cutoff frequency or

effective frequency range of the ﬁl-

ter (see diagram). Higher values

result in a brighter sound.

[2 ▲▼] HARMO.

(Harmonic con-

tent)

Determines the emphasis given to

the cutoff frequency (resonance),

set in BRIGHT. above (see dia-

gram). Higher values result in a

more pronounced effect.

[3 ▲▼]ATTACK Determines how quickly the sound reaches its maximum level after the

key is played. The lower the value, the quicker the attack.

[4 ▲▼] DECAY Determines how quickly the sound reaches its sustain level (a slightly

lower level than maximum). The lower the value, the quicker the decay.

[5 ▲▼] RELES.

(Release)

Determines how quickly the sound decays to silence after the key is

released. The lower the value, the quicker the decay.

[6 ▲▼] DEPTH Determines the intensity of the Vibrato effect. Higher settings result in a

more pronounced Vibrato.

[7 ▲▼] SPEED Determines the speed of the Vibrato effect.

[8 ▲▼] DELAY Determines the amount of time that elapses between the playing of a key

and the start of the Vibrato effect. Higher settings increase the delay of

the Vibrato onset.

Volume

These frequencies are

“passed” by the ﬁlter.

Cutoff

range

Frequency

(pitch)

Cutoff Frequency

Volume

Frequency (pitch)

Resonance

Time

Level

Key on Key off

Sustain

Level

AT TACK DECAY RELEASE

Pitch

DELAY

SPEED

DEPTH

Time

CVP-509/505/503/501 Reference Manual 13

Voices – Playing the Keyboard –

2

■ EFFECT/EQ Page

1 REVERB DEPTH/CHORUS DEPTH/DSP DEPTH/VIB ROTOR

2 DSP

3 EQ

Determines the Frequency and Gain of the Low and High EQ bands. For information about EQ, refer to

page 74.

■ HARMONY Page

Harmony sets the Right 1 and 2 parts together. Select the Right 1 part in the Main display, before you set

it. This has the same settings as the display of “Selecting the Harmony/Echo type” page 5 in step 3.

[1 ▲▼]/

[2 ▲▼]

REVERB

DEPTH

Adjusts the reverb depth.

[3 ▲▼]/

[4 ▲▼]

CHORUS

DEPTH

Adjusts the chorus depth.

[5 ▲▼] DSP ON/OFF Determines whether the DSP is on or off.

[6 ▲▼] DSP DEPTH Adjusts the DSP depth.

If you want to re-select the DSP type, you can do so in the “2 DSP”

menu explained below.

[7 ▲▼] VIBE ROTOR This will be displayed only if VIBE VIBRATE is selected for the DSP

Type parameter explained below. Determines whether VIBE

VIBRATE should be set to on or off when selecting the Voice.

[1 ▲▼]–

[4 ▲▼]

DSP TYPE Selects the DSP effect category and type. Select a type after selecting a

category.

[5 ▲▼]–

[8 ▲▼]

VARIATION Two variations are provided for each DSP type. Here, you can edit the

VARIATION on/off status and variation’s parameter value setting.

[5 ▲▼] ON/OFF The factory-programmed assignments are set to variation-off for all

Voices (standard variation of DSP is assigned). If you select VARIA-

TION ON here, a variation of the DSP effect is assigned to the Voice.

The variation parameter value can be adjusted in the VALUE menu

explained below.

PARAMETER Displays the variation parameter. (This differs depending on the effect

type and cannot be changed.)

[6 ▲▼]

–[8 ▲▼]

VALUE Adjusts the value of the DSP variation parameter.

14 CVP-509/505/503/501 Reference Manual

Voices – Playing the Keyboard –

2

Disabling Automatic Selection of Voice Sets (Effects, etc.)

Each Voice is linked to its default VOICE SET parameter settings. Usually these settings are automatically

called up when a Voice is selected. However, you can also disable this feature by the operation in the relevant

display as explained below.

For example, if you want to change the Voice yet keep the same Harmony effect, set the HARMONY/ECHO

parameter to OFF (in the display explained below).

1 Call up the operation display.

[FUNCTION] → [E] REGIST SEQUENCE/FREEZE/VOICE SET → TAB [E][F] VOICE SET

2 Use the [A]/[B] buttons to select a keyboard part.

3 Use the [4 ▲▼]–[8 ▲▼] buttons to enable/disable automatic calling up of the settings

(ON or OFF) independently for each parameter group.

2

3

CVP-509/505/503/501 Reference Manual 15

Voices – Playing the Keyboard –

2

The Organ Flute Voices selected from the [ORGAN FLUTES] button can be edited by adjusting the footage

levers, adding the attack sound, applying effect and equalizer, etc.

CAUTION

After editing, go to the Voice Selection display by pressing the [I] (PRESETS) button and save the setting. The settings will be lost if you

select another Voice or turn the power to the instrument off without executing the Save operation.

■ FOOTAGE Page

Refer to the Owner’s Manual, chapter 2.

■ VOLUME/ATTACK Page

■ EFFECT/EQ Page

Same parameters as in the VOICE SET “EFFECT/EQ” Page explained on page 13.

Editing Organ Flutes Parameters

[1 ▲▼]VOL (Volume) Adjusts the overall volume of the Organ Flutes. The longer the graphic

bar, the greater the volume.

[2 ▲▼] RESP

(Response)

Affects both the attack and release (page 12) portion of the sound,

increasing or decreasing the response time of the initial swell and release,

based on the FOOTAGE controls. The higher the value, the slower the

swell and release.

[3 ▲▼] VIBRATO

SPEED

Determines the speed of the vibrato effect controlled by the Vibrato On/

Off ([F]/[G] buttons) and Vibrato Depth ([H] button).

[4 ▲▼] MODE The MODE control selects between two modes: FIRST and EACH. In the

FIRST mode, attack (percussive sound) is applied only to the ﬁrst notes

played and held simultaneously; while the ﬁrst notes are held, any subse-

quently played notes have no attack applied. In the EACH mode, attack is

applied equally to all notes.

[5 ▲▼]–

[7 ▲▼]

4’, 2 2/3’, 2’ These determine the attack sound volume of the ORGAN FLUTE Voice.

The 4’, 2-2/3’ and 2’ controls increase or reduce the volume of attack

sound at the corresponding footages. The longer the graphic bar, the

greater the attack sound volume.

[8 ▲▼] LENG (Length) Affects the attack portion of the sound producing a longer or shorter

decay immediately after the initial attack. The longer the graphic bar, the

longer the decay.

Same as the

FOOTAGE

Page.

3

16 CVP-509/505/503/501 Reference Manual

Styles – Playing Rhythm and Accompaniment –

Styles

– Playing Rhythm and Accompaniment –

Contents

Selecting the Chord Fingering Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

Style Playback Related Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18

Split Point Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20

Memorizing the Original One Touch Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21

Creating/Editing Styles (Style Creator) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22

• Realtime Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23

• Step Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26

• Style Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26

• Editing the Rhythmic Feel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28

• Editing Data for Each Channel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30

• Making Style File Format Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31

Style playback can be controlled by the chords you play in the chord section of the keyboard. There are seven

types of ﬁngering.

1 Call up the operation display.

[FUNCTION] → [C] STYLE SETTING/SPLIT POINT/CHORD FINGERING → TAB [E][F] CHORD

FINGERING

2 Press the [1 ▲▼]–[3 ▲▼] buttons to select a ﬁngering.

For information on each ﬁngering type, see page 17.

Selecting the Chord Fingering Type

Chord Tutor

If you know the name of a chord but don’t know how to play, you can have the instrument show you the

notes to play. This is the Chord Tutor function.

On the CHORD FINGERING display, specify the Chord Root and Chord Type by using the [6 ▲▼]–[8

▲▼] button. The notes you need to play are shown in the display.

NOTE Depending on the chord, some notes may be omitted.

CVP-509/505/503/501 Reference Manual 17

Styles – Playing Rhythm and Accompaniment –

3

Chord Fingering Types

NOTE “AI” stands for “Artiﬁcial Intelligence.”

SINGLE FINGER Makes it simple to produce orchestrated accompaniment using major, seventh,

minor and minor-seventh chords by pressing a minimum number of keys on the

Chord section of the keyboard. This type is available only for Style playback.

The abbreviated chord ﬁngerings described below are used:

MULTI FINGER Automatically detects Single Finger or Fingered chord ﬁngerings, so you can

use either type of ﬁngering without having to switch ﬁngering types.

FINGERED Lets you ﬁnger your own chords on the chord section of the keyboard, while

the instrument supplies appropriately orchestrated rhythm, bass, and chord

accompaniment in the selected Style. The Fingered type recognizes the various

chord types which are listed on the separate Data List booklet and can be

looked up using the Chord Tutor function on page 16.

FINGERED ON BASS Accepts the same ﬁngerings as Fingered, but the lowest note played in the

Chord section of the keyboard is used as the bass note, allowing you to play

“on bass” chords. (In the Fingered mode, the root of the chord is always used

as the bass note.)

FULL KEYBOARD Detects chords in the entire key range. Chords are detected in a way similar to

Fingered, even if you split the notes between your left and right hands—for

example, playing a bass note with your left hand and a chord with your right,

or by playing a chord with your left hand and a melody note with your right.

AI FINGERED Basically the same as Fingered, with the exception that less than three notes

can be played to indicate the chords (based on the previously played chord,

etc.).

AI FULL KEYBOARD When this advanced ﬁngering type is engaged, the instrument will automati-

cally create appropriate accompaniment while you play just about anything,

anywhere on the keyboard using both hands. You don’t have to worry about

specifying the Style chords. Although the AI Full Keyboard type is designed to

work with many songs, some arrangements may not be suitable for use with

this feature. This type is similar to Full Keyboard, with the exception that less

than three notes can be played to indicate the chords (based on the previously

played chord, etc.). 9th, 11th and 13th chords cannot be played. This type is

available only for Style playback.

Cm

C

Cm

7

C

7

For a major chord, press

the root key only.

For a minor chord, simul-

taneously press the root

key and a black key to its

left.

For a seventh chord,

simultaneously press the

root key and a white key to

its left.

For a minor-seventh

chord, simultaneously

press the root key and both

a white and black key to its

left.

18 CVP-509/505/503/501 Reference Manual

Styles – Playing Rhythm and Accompaniment –

3

The instrument has a variety of Style playback functions which can be accessed in the display below.

1 Call up the operation display.

[FUNCTION] → [C] STYLE SETTING/SPLIT POINT/CHORD FINGERING → TAB [E][F] STYLE

SETTING

2 Use the [1 ▲▼]–[8 ▲▼] buttons for each setting.

Style Playback Related Settings

[1 ▲▼]STOP ACMP When [ACMP ON/OFF] is turned on and [SYNC START] is off, you can

play chords in the chord section of the keyboard with the Style stopped,

and still hear the accompaniment chord. In this condition—called “Stop

Accompaniment”—any valid chord ﬁngerings are recognized and the

chord root/type are shown in the display. Here, you can determine

whether the chord played in the chord section will sound or not in the

Stop Accompaniment status.

OFF

The chord played in the chord section will not sound.

STYLE

The chord played in the chord section will sound via the Voices for the

Pad part and the Bass channel of the selected Style.

FIXED

The chord played in the chord section will sound via the speciﬁed Voice,

regardless of the selected Style.

NOTE When the selected Style contains MegaVoices, unexpected sounds may result when this is set to

“STYLE.”

NOTE When you record a song, the chord detected by playing the Stop Accompaniment can be recorded

regardless of the setting here. Please note that both the Voice that is sounded and the chord data

will be recorded when set to “STYLE,” and only the chord data will be recorded when set to “OFF”

or “FIXED.”

CVP-509/505/503/501 Reference Manual 19

Styles – Playing Rhythm and Accompaniment –

3

[2 ▲▼]OTS LINK TIM-

ING

This applies to the OTS Link function. This parameter determines the

timing in which the One Touch Settings change with the MAIN VARIA-

TION [A]–[D] change. (The [OTS LINK] button must be on.)

REAL TIME

One Touch Setting is immediately called up when you press a MAIN

VARIATION button.

NEXT BAR

One Touch Setting is called up at the next measure, after you press a

MAIN VARIATION button.

[3 ▲▼] SYNCHRO

STOP WIN-

DOW

This determines how long you can hold a chord before the Synchro Stop

function is automatically cancelled. When the [SYNC STOP] button is

turned on and this is set to a value other than “OFF,” this is automatically

cancels the Synchro Stop function if you hold a chord for longer than the

time set here. This conveniently resets Style playback control to normal,

letting you release the keys and still have the Style play. In other words, if

you release the keys sooner than the time set here, the Synchro Stop func-

tion works.

[4 ▲▼] STYLE TOUCH Turns touch response for the Style playback on/off. When this is set to

“ON,” the Style volume changes in response to your playing strength in

the chord section of the keyboard.

[5 ▲▼]/

[6 ▲▼]

SECTION SET Determines the default section that is automatically called up when

selecting different Styles (when Style playback is stopped). When set to

“OFF” and Style playback is stopped, the active section is maintained

even if the different Style is selected. When any of the MAIN A–D sec-

tions is not included in the Style data, the nearest section is automatically

selected. For example, when MAIN D is not contained in the selected

Style, MAIN C will be called up.

[7 ▲▼] TEMPO This determines whether the tempo changes or not when you change

Styles during Style playback.

HOLD

The tempo setting of the previous Style is maintained.

RESET

The tempo changes to that of the initial default tempo for the selected

Style.

[8 ▲▼]PART ON/OFF This determines whether the Style Channel On/Off status changes or not

when you change Styles.

HOLD

The Style Channel On/Off status of the previous Style is maintained.

RESET

All Style Channels are set to On.

20 CVP-509/505/503/501 Reference Manual

Styles – Playing Rhythm and Accompaniment –

3

These are the settings (there are two Split Points) that separate the different sections of the keyboard: the

Chord section, the LEFT part section and the RIGHT 1 and 2 section. The two Split Point settings (below)

are speciﬁed as note names.

1 Call up the operation display.

[FUNCTION] → [C] STYLE SETTING/SPLIT POINT/CHORD FINGERING → TAB [E][F] SPLIT

POINT

2 Set the Split Point.

Split Point Settings

[F] Split Point (S+L) Sets the Split Point (S) and Split Point (L) to the same note. Press the [F]

button and rotate the [DATA ENTRY] dial.

[G] Split Point (S) Sets each Split Point. Press one of the desired buttons and rotate the

[DATA ENTRY] dial.

NOTE Split Point (L) cannot be set lower than Split Point (S).

[H] Split Point (L)

[1 ▲▼]/

[2 ▲▼]

STYLE You can specify each Split Point by note name. “STYLE” indicates Split

Point (S) and “LEFT” indicates Split Point (L).

[3 ▲▼]/

[4 ▲▼]

LEFT

Split Point (S)

Chord section

Voice RIGHT

1–2

Split Point (L)

Voice LEFT

Split Point (S+L)

Chord section

+ Voice LEFT

Voice RIGHT 1 and 2

Sidan laddas ...

Yamaha CVP-505 Bruksanvisning

Yamaha CVP-505 Bruksanvisning

på andra språk

Relaterade papper