12
• The electrical and magnetic fields emitted by this heat pad may inter-
fere with the function of a pacemaker. However, they are still well
below the limits: electrical field strength: max. 5000V/m, magnetic
field strength: max. 80A/m, magnetic flux density: max. 0.1 millite-
sla. Please therefore consult your doctor and the manufacturer of
your pacemaker before using this heat pad.
• Do not pull, twist or make sharp bends in the cables.
•
If the cable and control of the heat pad are not positioned properly,
there may be a risk of becoming entangled in, being strangled by, trip-
ping over, or stepping on the cable and control. The user must ensure
that excess lengths of cable, and cables in general, are safely routed.
• Please check this heat pad frequently for signs of wear and tear
or damage. If any such signs are evident, if the heat pad has been
used incorrectly or if it no longer heats up, it must be checked by the
manufacturer before being switched on again.
• Under no circumstances should you open or repair the heat pad
(including the accessories) yourself because faultless functionality
can no longer be guaranteed thereafter. Failure to observe this will
invalidate the guarantee.
• If the mains connection cable of this heat pad is damaged, it must be
disposed of. If it cannot be removed, the heat pad must be disposed
of.
• Do not expose control and cables to direct sunlight.
• When this heat pad is switched on:
– Do not place any sharp objects on it
– Do not place any heat sources, such as hot water bottles, heat
pads or similar, on it
• The electronic components in the control warm up when the heat
pad is in use. For this reason, the control must never be covered or
placed on the heat pad when it is in use.
• It is essential to observe the information relating to the following
chapters: Operation, Cleaning and maintenance, Storage.
• If you should have any questions about using our devices, please
contact our Customer Services department.
3. Intended use
CAUTION
This heat pad is only designed to warm up the human body.
The exclusive shape of this heating pad was developed specifically for use on the shoulders and neck.
Position the heating pad on the shoulders and pull the ends over the chest. The magnetic catch keeps the pad
in place. For a tighter fit, the poppers can be used. To undo, simply pull the ends apart or release the poppers.