Jabra BT200 - Headset - Over-the-ear Användarmanual

Kategori
Mobila headset
Typ
Användarmanual
JABRA
BT200
JABRA
BT200
FREESPEAK
JABRA BT200
User Manual
For Non Bluetooth Phones
Bluetooth Mobile Headset
FOR ALL BLFOR ALL BLUETUETOOOOTH MOBILE PHONESTH MOBILE PHONES
32
English
Introduction ....................................................................................................................................................... 4
What’s in the Package?................................................................................................................................... 5
JABRA BT300 Bluetooth Headset Features ............................................................................................. 6
Choose Right or Left Ear Wearing Style ................................................................................................... 8
Placing the Headset on your Ear ................................................................................................................ 9
Using your JABRA BT300 Headset........................................................................................................... 10
Charging & Battery Time............................................................................................................................. 13
Linking (Pairing) the Headset to the Multi-adapter.......................................................................... 15
Making a Call with the JABRA BT200 ..................................................................................................... 16
Speaker Volume & Volume Control Buttons ........................................................................................ 20
Optimising Audio Quality........................................................................................................................... 21
Using JABRA BT200 Bluetooth Phones.................................................................................................. 22
Audio & Visual Indicators ............................................................................................................................ 22
JABRA BT200 Specifications....................................................................................................................... 24
Storage of Headset........................................................................................................................................ 24
Certification & Safety Approvals / General Information.................................................................. 25
Warranty & Parts Replacement ................................................................................................................. 26
English ....................................................................................... 3
Français
................................................................................. 29
Deutsch ................................................................................. 57
Italiano
................................................................................... 83
Nederlands ..................................................................... 111
Español
............................................................................... 139
Dansk
................................................................................... 166
Suomi ................................................................................... 193
Svenska
.............................................................................. 219
PART NUMBER BT200-31 REVISION NUMBER Revision A
What’s in the Package?
Your JABRA BT200 Bluetooth headset includes a Bluetooth headset, Bluetooth
Multi-Adapter and charging solution.
Enclosed in this package you will find:
One JABRA BT200 Bluetooth headset (Headset Includes One JABRA MiniGel
)
One JABRA Multi-Adapter – Bluetooth Adapter, Audio Connector, headset holder and
battery charger.
One JABRA mains power adapter – used with the Multi-Adapter for charging the
headset and Multi-Adapter batteries.
(Please use only the supplied compatible charger for this device)
One removable charging cradle clip – to attach the headset to you for easy carrying
One JABRA Audio socket adapter (included in certain versions)
One small stylus for ‘pairing the Multi-Adapter.
Two spare JABRA MiniGels
One JABRA BT200 User Guide
Introduction
The JABRA BT200 Bluetooth Headset is a lightweight wireless headset utilising Bluetooth
technology. The Bluetooth Multi-Adapter supplied plugs directly into your non-Bluetooth
phone to allow convenient cordless connection. (Connection varies with phone model
and may require an audio adapter) The Headset contains a microphone and a speaker,
and is intended for hands free communications with mobile phones. Power for the
Bluetooth Multi-Adapter and Headset are provided by an integral rechargeable battery.
The battery must be charged with the supplied charger / holder and mains power
adapter. Battery Life is approximately 3 hours (“Talk Time”) and 96 hours standby time.
Please read this user booklet before you start using the product and make sure that you:
Fully charge your JABRA BT200 headset and Multi-Adapter before you use it the first
time. (see Page 13)
Make sure that connect the Multi-Adapter to your mobile phone before you start
making calls. (see page 16)
Thank you for choosing the JABRA BT200, we hope that you are
happy with your choice!
54
4
6
10
9
5
8
3
7
2
1
JABRA BT200 Bluetooth Headset Features
1. Headset Indicator Light (BLUE LED) – Indicates the status of the headset.
2. Multi-Function Button (MFB): controls various functions of the headset.
3. Volume Control Button: adjusts the speaker (receive) volume + / -.
4. Speaker: for incoming audio.
5. Microphone: voice input for outgoing audio.
6. MiniGel
: One-Size-Fits-All for either ear. (JABRA BT200 should only be used with the
MiniGel in place.)
7. Charging Port: contacts for charging the battery.
8. Audio Connector: Plugs into your phone to connect the headset and phone together.
9. Stylus Switch: Switch used to pair the Multi-Adapter with the headset or to adjust
audio quality.
10. Multi- Adapter Indicator Light (LED): Indicator used to show operating mode of the
Multi-Adapter.
76
Placing the Headset on your Ear
In order to wear the headset please follow these instructions:
1. Place the JABRA BT200
Headset behind your ear.
2. Loop the top of the headset
over the top of your ear.
3. Place the MiniGel into your
ear canal.
4. The microphone will then be
positioned in the direction of
your voice.
Choose Right or Left Ear Wearing Style
The JABRA BT200 Bluetooth headset can be worn on either ear, the MiniGel is attached to
the product for wearing on the right ear.To position for wearing on either ear please use
the simple instruction as follows:
1. Hold the headset firmly and
carefully remove the MiniGel
by gently lifting and pulling it
from the speaker housing.
2. Rotate the MiniGel 180°
from its position.
3. Replace the MiniGel onto
the speaker housing.
4. The Headset is now ready
for wearing on the left ear.
5. To change from left to right
wearing styles please repeat the
steps above rotating the MiniGel
position for either left or right ears.
98
11
To switch your headset off:
1. Press and hold the Multi-Function Button for 3 seconds until the indicator
light flashes rapidly.
2. Release the button.The headset is now turned off and the indicator light
will no longer flash.
(Please note you will need to wait at least 5 seconds before switching the
headset back on.)
Attaching the charger cradle clip
The charging cradle can be fastened to your belt or clothes
using the supplied clip.To attach the clip to the cradle follow
these simple instructions:
1. Locate the two slots on the charging cradle as shown.
2. Position the clip with one end in the top slot on the cradle.
3. Press the clip gently onto the charger cradle until the other
end fits into the bottom slot securely.
4. You will hear a clicking sound when this is correctly attached.
1
2
3
Using your JABRA BT200 Headset
The multi-adapter needs to be ON for the headset to work.To turn the multi-adapter on:
1. Remove the headset from the multi-adapter, this will automatically turn the
multi-adapter ON.
2. The multi-adapter will then be in standby mode and ready for use.
3. The indicator light will flash every 3 seconds.
4. To turn the multi-adapter OFF, simply insert the headset to the multi-adpater holder.
Turning your headset ON and OFF
To switch your JABRA BT200 on:
1. Remove the headset from the multi-adapter.
2. Press and hold the Multi-Function button firmly for at least 3 seconds until the
indicator light flashes rapidly.
3. Release the Multi-Function Button.
4. The headset will now be switched ON (standby mode) and the indicator light will
continue to slow flash every 3 seconds.
10
1312
Charging & Battery Time
Before you can use your JABRA BT200 headset, you
need to place it in its Multi-Adapter and charge it fully.
SEE FIGS 1 & 2 (Please note that the headset can be
ON or OFF while charging.) A fully charged battery
provides up to 3 hours of talktime, and up to 96 hours
of standby time.The JABRA BT200 battery does not
need to be completely used before charging – you
can re-charge the product at any time. If the charger
is left connected and charging – it will not over
charger the battery.
To charge the headset and multi-adapter , please
follow this guide:
1. Insert the travel charger’s electrical plug into an
electrical outlet.
2. Plug the mains travel charger connector into the
charger port on your multi-adapter .
1
2
Using the stylus switch
Inside the multi-adapter there is a hidden switch which
is used for a number of functions. The stylus switch is
accessible via a hole in the multi-adapter, just next to
the charging port socket. Inside the hole you will see a
small white rectangle which is the stylus switch. Using
the stylus provided in the pack, you can press the
switch when instructed in this user guide.
Using the audio adapter
Some mobile phones do not have standard sockets for
headsets to be connected. So, these phones often
have adapters available to make your phone
compatible with standard headsets. Depending on
the version of JABRA BT200 you have,your package
may include a JABRA audio adapter. To connect the
multi-adapter to your phone using the audio adapter:
1. Plug the audio adapter into your phone.
2. Plug the jack plug from the multi-adapter into the
socket on the audio adapter.
2
1
1514
Linking (Pairing) the Headset to
the Multi-adapter
Pairing creates a unique wireless link between two Bluetooth devices – such as the JABRA
BT200 headset and multi-adapter. You should NOT have to pair your headset and multi-
adapter – they have already been paired in the factory for you. If you want to use a
different JABRA multi-adapter or headset, then please follow the steps below:
1. Ensure that the main power adapter is not plugged in.
2. Ensure that the JABRA BT200 is switched OFF.
3. Using the stylus supplied, press down on the stylus switch (see Using the Stylus
Switch section) for 6 seconds until the multi-adapter indicator light stays lit. Then
Release. (Note that the indicator light will flash during the 6 seconds – but keep
pressing until on constant.)
4. Without delay, press the multi-function on/off button on the headset for 6 seconds
until it’s indicator light stays on constant.Then release the button.
5.
After a short period, both the indicator lights will flash in standby mode (every 3 seconds).
6. The headset and multi-adapter are now paired.
You will not need to repeat this process in the future because the headset and the
multi-adapter are now paired.
3. While charging,the indicator light (BLUE LED) on the headset and multi-adapter are
lit, and will remain lit, until both the headset and multi-adapter are fully charged. (The
LED will only turn on if the headset is correctly inserted into the multi-adapter.)
4. Charge the headset and multi-adapter for approximately 2 hours, or until both the
indicator lights go out.
5. You can now remove the headset from the multi-adapter and it will be ready to use.
If you remove the headset from the multi-adapter (with the power supply plugged in) the
headset will automatically turn on (standby mode). If there is an incoming call when the
headset is in the multi-adapter then you can answer the call as described in section
‘making and receiving calls.
Low Battery Warning:
The headset needs re-charging when you hear three rapid high tones through the
headset’s speaker at 30-second intervals, and see the LED flash quickly 3 times every 3
seconds. Once the low battery warning indicators start you have 3-5 minutes of talktime
left and you will then need to follow the above steps 1-4.
1716
b) Making a Call Using Voice Dialing
1. Place the headset in the desired wearing style.
2. On the Headset - Press the Multi Function Button.
3. A short tone will prompt you to say the name of the person you wish to call (as entered
in the phone’s voicedial phonebook directory). Speak the voice ‘tag name.
4. The phone automatically dials your selection, and you see the details of the call
on the phone screen.
5. When connected you are free to communicate normally via the headset.
(Note : Please refer to the phone user guide for instructions on storing voice tags.)
c) Making a Call Using Voice Dialing
If your mobile phone supports voice dialing, you can use this feature with the headset.
(Voice dialing on your phone must be turned on and voice tags stored) Please refer to
your phones user guide for more information on voice control. (Note : Please refer to
the phone user guide for instructions on storing voice tags.)
1. Ensure that your headset is in standby mode by removing it from the multi-adapter.
2. Press the multi-function button on the headset – this puts the headset into active mode
and will establish a link between the multi-adapter and the headset.(The indicator lights
will flash every 3 seconds – you may also hear background noise as well.)
Connecting the multi-adapter to your phone
The multi-adapter needs to be connected to your phone.To enjoy cordless
communication with the JABRA BT200 simply:
1. Locate the headset socket on your phone.
2. Plug in the jack from the multi-adapter.
Making a Call with the JABRA BT200
a) Making a Call from the Mobile Phone
1. Ensure that your headset is in standby mode by removing it from the multi-adapter.
2. Place the headset on your ear in the desired wearing style.
3. Press the multi-function button on the headset – this puts the headset into active mode
and will establish a link between the multi-adapter and the headset.(The indicator
lights will flash every 3 seconds – you may also hear background noise as well.)
4. Using the phone’s keypad, dial the phone number.
5. To start the call, press the phone’s SEND / CALL key – the phone initiates the call.
6. The call will then transfer automatically to the headset when connection is made.
1918
2. Keypad First
Answer the call as usual by using the phones keypad. In this case your can then
follow instruction in the section Transferring a Call.
3. From the Multi-Adapter
If there is an incoming call and your headset is in the multi-adapter then you must:
Disconnect the power adapter (if plugged-in)
Remove the headset from the multi-adapter, and make sure it is switched on.
Press the headset multi-function button to put the headset in active mode.
Answer using the phone’s key pad.
f) Transferring a Call
To transfer a call from the phone to the headset, briefly press the headset Multi-
function button which will start the active mode. Plug the jack of the multi-adapter
into your phones headset socket.
To transfer a call from the
headset to the phone, press the multi-function button
which will place the headset in standby mode.Then remove the jack from the headset
socket on your phone.
3. Place the headset in the desired wearing style.
4. Use the phone’s keypad to initiate the voice dialling.
5. A short tone will prompt you to say the name of the person you wish to call (as
entered in the phones voicedial phonebook directory). Speak the voice ‘tag’name.
6. The phone automatically dials your selection, and you see the details of the call on the
phone screen.
7. When connected you are free to communicate normally via the headset.
d) Ending a call from the Headset
To end a call when wearing the headset - press the headset’s Multi Function Button.
Or you can simply end the call from the phone keypad.
e) Receiving/Answering a Call
Any of three methods can be used to answer a call. In each way you must first press
the multi-function button on the headset to put it into active’mode. During active
mode the LED will flash every second.
1. Headset First
Briefly press the multi-function button to make the headset active – then answer the
call from the phones keypad in the usual way.
2120
Optimising Audio Quality
On some phone models you may hear the echo of your own voice when you are talking.
You will then need to lower the echo level by adjusting the volume of your multi-adapter.
To adjust the echo level you need to use the stylus switch and follow these instructions:
Ensure the AC mains power is not plugged in.
Ensure the multi-adapter is in active mode. (see Answering a Call)
Use the stylus supplied to press and hold down the switch for more than 6 seconds
until the multi-adapter indicator light stays on constant.
This is similar to the pairing process, but CONTINUE to hold the stylus switch down
while the light is ON.
After a few more seconds you will see 1, 2 or 3 longer ‘blinks’ (flashes). After the
blinking stops, the standard standby mode will flash every 3 seconds.There will also
be ‘beeps/tones’in then headset – you may find it easier to listen.
The number of tones or flashes corresponds to the output level of the multi-adapter.
1 Tone / Blink High Setting
2 Tone / Blink Medium Setting
3 Tone / Blink Low Setting
Speaker Volume & Volume Control Buttons
The JABRA BT200 offers louder speaker
volume than most headsets due to its active
battery powered amplifier.You can adjust the
volume to 8 pre-set levels.Volume up (+) and
volume down (–) button will regulate the
volume to the speaker in these 8 steps. One
step per key press increases / decreases the
desired volume until a satisfactory level is
reached.An audible tone is played for each
step +/- and when either the minimum or
maximum volume has been achieved.
2322
Multi-Adapter State LED Indication State
Power ON LED ON – with JABRA BT200 in the multi-adapter
Pairing Mode LED ON – with JABRA BT200 in the multi-adapter
Standby Mode Flashes every 3 seconds – no audio link between
headset & adapter
Active Mode Flashes every 1 second – call in progress and linked.
Audio Indicator Chart
Headset State Audio Indication
Volume limit Repeated single tone when either lower or upper
limit achieved
Low Battery Tone Three rapid tones repeated every 30 seconds
Out of Range No audio indications, deterioration of audio quality will
alert user
Incoming Call Ring tone
Pairing Confirmation Single High Pitch Tone
Active Mode Quick series of 4 tones – low to high.
Power On/OFF Quick Series of 4 Tones – low to high pitch.
Using JABRA BT200 with Bluetooth Phones
If you purchase a new Bluetooth enabled mobile phone you only need to pair the
headset and phone together. You do not need to but a new headset product – the JABRA
BT200 headset only will then work with the Bluetooth phone without the need for the
multi-adapter or phone connector.
Audio & Visual Indicators
Indicator Light Chart
Headset State LED Indication State
Power Off LED OFF
Standby Mode LED ON – Flashes every 3 seconds
Charging In Process LED ON – (while in charging cradle)
Charging Complete LED OFF – (while in charging cradle)
Low Power LED ON – Rapid flashes
Pairing Mode LED ON – Constant
Pairing Successful LED – Series of blue rapid flashes
Active / On Call Indicator LED – Flashes every second
2524
Certification and Safety Approvals /
General Information
This product is CE marked according to the provisions of the R & TTE Directive
(99/5/EC).
Hereby, GN Netcom, declares that this product is in compliance with the
essential requirements and other relevant provisions of Directive 1999/5/EC.
For further information please consult http://www.gnnetcom.com.
Please note that this product uses radio frequency bands not harmonised within EU.
Within the EU this product is intended to be used in Austria, Belgium, Denmark,
Finland, France, Germany, Greece, Ireland. Italy, Luxembourg, The Netherlands,
Portugal, Spain, Sweden, United Kingdom and within EFTA in Iceland, Norway
and Switzerland.
Users are not permitted to make changes or modify the device in any way. Changes
or modifications not expressly approved by JABRA (GN Netcom) will void the users
authority to operate the equipment.
BLUETOOTH is a trademark owned by the Bluetooth SIG, Inc.
JABRA BT200 Specifications
Bluetooth Compliance Bluetooth 1.1 with Headset Profile
Bluetooth Power 2.5 Milliwatts (0.0025 watts)
Maximum Cordless Distance 30 Feet (10 meters)
Weight of Headset 23g / 0.8oz
Typical Standby Time 96 Hours
Typical Talktime 3 Hours
Typical Re-Charge Time 2 Hours
Battery Type Lithium Polymer (Rechargeable)
Other Comments NOT Waterproof
Storage Of Headset
1. Always store the JABRA BT200 with power off and safely protected.
2. Avoid storage at high temperatures (above 60 °C / 134°F) – such as in a hot vehicle or
in direct sunlight. (Storage at high temperatures can degrade performance and
reduce battery life.)
3. Do not expose the headset or any of its supplied parts to rain or other liquids.
2726
Any implied warranty on JABRA (GN Netcom) products is limited to two years from
the date of purchase on all parts, including any cords and connectors.
Specifically exempt from any warranty are limited-life consumable components
subject to normal wear and tear, such as microphone windscreens, ear cushions,
decorative finishes, batteries, and other accessories.
JABRA (GN Netcom) is not liable for any incidental or consequential damages arising
from the use or misuse of any JABRA (GN Netcom) product.
This warranty gives you specific rights and you may have other rights which vary from
area to area.
Unless otherwise instructed in the User Guide, the user may not, under any
circumstances, attempt to perform service, adjustments or repairs on this unit,
whether in or out of warranty. It must be returned to the purchase point, factory or
authorised service agency for all such work.
JABRA (GN Netcom) will not assume any responsibility for any loss or damage
incurred in shipping.Any repair work on JABRA (GN Netcom) products by
unauthorised third parties voids any warranty.
Warranty & Parts Replacement
Battery: The JABRA BT200 is equipped with a lithium polymer rechargeable battery.
Replacement or service must be done at a qualified service centre or returned to the
manufacturer. Use only the battery supplied.
Use only the supplied and approved AC charger.
JABRA (GN Netcom) warrants this product against all defects in material and
workmanship for a period of one year from the date of original purchase.The conditions
of this warranty and our responsibilities under this warranty are as follows:
The warranty is limited to the original purchaser.
A copy of your receipt or other proof of purchase is required.Without proof of
purchase, your warranty is defined as beginning on the date of manufacture as
labelled on the product.
The warranty is void if the serial number, date code label or product label is removed,
or if the product has been subject to physical abuse, improper installation,
modification, or repair by unauthorised third parties.
The responsibility of JABRA (GN Netcom) products shall be limited to the repair or
replacement of the product at it’s sole discretion.
Français
Introduction .....................................................................................................................................................30
Contenu du paquet .......................................................................................................................................31
Fonctions du casque Bluetooth JABRA BT200 ...................................................................................32
Choisir l’oreille sur laquelle porter le casque ......................................................................................34
Placement du casque sur l’oreille ............................................................................................................35
Utilisation du casque JABRA BT200 ........................................................................................................36
Temps de chargement et durée de vie de la pile ..............................................................................39
Coupler (associer) le casque au multi-adaptateur .............................................................................41
Effectuer un appel à partir du JABRA BT200 .......................................................................................42
Volume du haut-parleur et réglage du volume...................................................................................47
Optimiser la qualité audio ..........................................................................................................................48
Utilisation du JABRA BT200 avec des mobiles Bluetooth ...............................................................49
Indicateurs sonore et visuel .......................................................................................................................50
Spécifications JABRA BT200 .......................................................................................................................52
Rangement du casque .................................................................................................................................52
Certification et exigences de sécurité / Informations générales ....... ..........................................53
Garantie et Remplacement des pièces ..................................................................................................54
2928
3130
Introduction
Le casque Bluetooth JABRA BT200 est un casque ultra-léger sans fil qui fonctionne sur la
base de la technologie Bluetooth. Le multi-adaptateur Bluetooth fourni se branche
directement sur votre mobile, même s’il n’est pas Bluetooth, pour un branchement sans fil
pratique. (Le branchement varie en fonction du modèle et peut nécessiter un adaptateur
audio). Le casque se compose d’un microphone et d’un haut-parleur, et permet d’utiliser
un téléphone portable en mains libres. L’alimentation électrique du multi-adaptateur et
du casque Bluetooth est fournie par une pile entièrement rechargeable. Il est impératif de
ne recharger la pile qu’avec le chargeur/support fourni et avec l’adaptateur secteur. La
pile assure environ 3 heures de conversation et 96 heures d’autonomie en veille.
Lisez attentivement cette brochure avant d’utiliser le produit et assurez-vous que :
La pile de votre casque JABRA BT200 et du multi-adaptateur est totalement chargée
avant toute première utilisation. (voir Page 39)
Vérifiez que le multi-adaptateur de votre mobile est bien branché au téléphone avant
d’effectuer vos appels. (voir Page 42)
Merci d’avoir choisi le JABRA BT200.Nous espérons que vous êtes
satisfait(e) de votre choix !
Contenu du paquet
Votre ensemble casque Bluetooth JABRA BT200 est livré avec un casque, un multi-
adaptateur et un dispositif de recharge Bluetooth.
Vous trouverez dans ce paquet :
un casque Bluetooth JABRA BT200 (le casque est livré avec un JABRA MiniGel
)
un multi-adaptateur JABRA : adaptateur Bluetooth, connecteur audio, support casque
et chargeur pile
un adaptateur électrique JABRA (à utiliser avec le multi-adaptateur pour recharger le
casque et les piles du multi-adaptateur) ; (veuillez utiliser exclusivement des chargeurs
agréés et compatibles avec cet appareil)
un clip amovible de rechargement du support (pour fixer le casque sur vous et en
faciliter le transport)
un adaptateur prise audio JABRA (fourni dans certaines versions)
un petit stylet pour « coupler » le multi-adaptateur
deux JABRA MiniGels
de rechange
un guide d’utilisation JABRA BT200
3332
Fonctions du casque Bluetooth
JABRA BT200
1. Voyant indicateur du casque (LED bleu) : indique l’état actuel du casque.
2. Bouton multifonctions (BMF) : commande les diverses fonctions du casque.
3. Commande Volume : permet de régler le volume (réception) du haut-parleur +/-.
4. Haut-parleur : pour l’entrée audio.
5. Micro : entrée voix pour la sortie audio.
6. MiniGel
: taille unique adaptable indifféremment sur l’oreille droite ou gauche (le
JABRA BT200 doit être utilisé uniquement après avoir mis le MiniGel en place).
7. Dispositif de chargement : contacts pour le chargement de la pile.
8. Connecteur audio : se branche sur le téléphone pour assurer la connexion entre le
casque et le mobile.
9. Interrupteur stylet : commutateur utilisé pour « coupler » le multi-adaptateur au
casque ou pour régler la qualité audio.
10. Indicateur visuel (LED) multi-adaptateur : voyant utilisé pour afficher que le multi-
adaptateur fonctionne.
4
6
10
9
5
8
3
7
2
1
3534
Choisir l’oreille sur laquelle porter le casque
Le casque Bluetooth JABRA BT200 se porte sur n’importe quelle oreille. Le MiniGel est
positionné sur le produit pour un port sur l’oreille droite. Pour le configurer pour un port
sur l’une ou l’autre oreille,suivez simplement les instructions ci-dessous :
1. Maintenir fermement le casque et
enlever délicatement le MiniGel en
soulevant doucement pour le détacher
du logement du haut-parleur.
2. Faire tourner le MiniGel de 180 degrés
par rapport à sa position actuelle.
3. Replacer le MiniGel sur le logement
du haut-parleur.
4. Le casque est prêt à être porté sur
l’oreille gauche.
5. Pour modifier la disposition pour un port
sur l’oreille droite au lieu de l’oreille
gauche, répéter les étapes ci-dessus en
faisant tourner le MiniGel de manière à le
porter sur l’oreille gauche ou droite.
Placement du casque sur l’oreille
Pour porter le casque, suivez les instructions suivantes :
1. Placer le casque JABRA BT200
derrière l’oreille.
2. Faire passer le haut du casque
par-dessus l’oreille.
3. Placer le MiniGel dans le
canal auriculaire.
4. Le microphone est alors positionné
en direction de la voix.
3736
Utilisation du casque JABRA BT200
Le multi-adaptateur doit être sur ON pour que le casque fonctionne. Pour mettre le multi-
adaptateur en marche :
1. Enlever le casque du multi-adaptateur : celui-ci se met automatiquement sur ON.
2. Le multi-adaptateur passe ensuite en mode veille. Il est prêt à l’emploi.
3. Le voyant clignote toutes les 3 secondes.
4. Pour arrêter le multi-adaptateur (position OFF), insérez simplement le casque dans le
support du multi-adaptateur.
Mise en marche et arrêt (ON/OFF) de votre casque
Pour mettre le JABRA BT200 en marche :
1. Ôtez le casque du multi-adaptateur.
2. Appuyez sur le bouton multifonctions et maintenez-le fermement pendant au moins
3 secondes jusqu’à ce que le voyant indicateur clignote rapidement.
3. Relâchez le bouton multifonctions.
4. Le casque est maintenant en position Marche/ON (mode veille) et le voyant indicateur
continue de clignoter lentement toutes les trois secondes.
Pour arrêter le casque :
1. Appuyez sur le bouton multifonctions et maintenez-le fermement pendant au moins
3 secondes jusqu’à ce que le voyant indicateur clignote rapidement.
2. Relâchez le bouton. Le casque est maintenant éteint et le voyant indicateur ne
clignote plus.
(Remarque : vous devrez attendre au moins 5 secondes avant de remettre le casque
en marche).
Fixer le clip du support de chargement
Le support de chargement peut se fixer à la ceinture ou sur les
vêtements à l’aide du clip fourni. Pour fixer le clip sur le
support, suivez simplement les instructions suivantes :
1. Repérer les deux encoches du support de chargement comme
indiqué sur le cliché.
2. Placer une extrémité du clip dans l’encoche supérieure du support.
3. Appuyer doucement sur le clip pour l’enfoncer dans le support de
chargement jusqu’à ce que l’autre extrémité s’adapte parfaitement
dans l’encoche inférieure.
4. Vous entendrez un petit « clic » lorsque le dispositif est bien en place.
1
2
3
3938
Utilisation de l’interrupteur du stylet
Le multi-adaptateur est équipé d’un interrupteur caché utilisable
pour de multiples fonctions. L’interrupteur du stylet est accessible
via un orifice du multi-adaptateur, juste à côté de la prise du port
de rechargement.À l’intérieur du trou, vous verrez un petit
rectangle blanc : il s’agit de l’interrupteur du stylet.En utilisant le stylet
fourni avec l’ensemble, vous pouvez appuyer sur l’interrupteur selon les
instructions figurant dans le présent guide d’utilisation.
Utilisation de l’adaptateur audio
Le branchement ordinaire de casques n’est pas prévu sur certains téléphones mobiles. Ces
téléphones disposent fréquemment d’adaptateurs permettant de faire en sorte que votre
téléphone soit compatible avec des casques ordinaires. En
fonction de la version du JABRA BT200 dont vous disposez,
votre ensemble pourra inclure un adaptateur audio JABRA.
Pour brancher le multi-adaptateur sur votre téléphone à
l’aide de l’adaptateur audio :
1. Branchez l’adaptateur audio sur votre téléphone.
2. Branchez la fiche mâle du multi-adaptateur dans la prise
femelle de l’adaptateur audio.
Temps de chargement et
durée de vie de la pile
Avant de pouvoir utiliser votre casque JABRA BT200, vous
devez le placer sur son multi-adaptateur et le charger
complètement. SE REPORTER AUX SCHÉMAS 1 et 2 (Notez
que le casque peut fonctionner ou non en mode
chargement). Une pile entièrement chargée assure jusqu’à
3 heures de fonctionnement en conversation et plus de 96
heures en veille (hors conversation). Il n’est pas nécessaire
que la pile du JABRA BT200 soit entièrement épuisée avant
de procéder au chargement : vous pouvez recharger
l’appareil à tout moment. Si vous laissez le chargeur
connecté et en charge, il ne surchargera pas la pile.
Pour charger le casque et le multi-adaptateur, veuillez
procéder de la manière suivante :
1. Insérer la fiche électrique du chargeur de voyage dans
une prise électrique.
2. Brancher l’autre fiche du chargeur de voyage sur le port
de chargement de votre multi-adaptateur.
1
2
2
1
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120
  • Page 121 121
  • Page 122 122
  • Page 123 123

Jabra BT200 - Headset - Over-the-ear Användarmanual

Kategori
Mobila headset
Typ
Användarmanual