BERG Rally Användarmanual

Typ
Användarmanual
BERG Rally DRT Yellow 3 Gears
User manual
Gebruikshandleiding
Gebrauchsanweisung
Mode d’emploi
Manual de usuario
Instruzione per l’uso
Brugermanual
Instruktionsbok
Sheetnr.: 49.90.00.38 | REV01
Not suitable for children under three years
Choking hazard - Small parts
Adult assembly required
Keep the user manual for future reference
Ne convient pas aux enfants de moins de trois ans
Danger d'étouffement - Petits éléments
Assemblage par un adulte requis
Conserver la mode d’emploi pour utilisation future
Niet geschikt voor kinderen jonger dan drie jaar
Verstikkingsgevaar - Kleine delen
Te monteren door een volwassene
Bewaar de gebruikshandleiding voor toekomstig gebruik
Nicht für Kinder unter drei Jahren geeignet
Erstickungsgefahr - Kleine Teile
Der Zusammenbau ist durch einen Erwachsenen vorzunehmen
Bewahren Sie die Anleitung für die zukünige Verwendung
Nicht für Kinder unter drei Jahren geeignet
Erstickungsgefahr - Kleine Teile
Der Zusammenbau ist durch einen Erwachsenen vorzunehmen
Bewahren Sie die Anleitung für die zukünige Verwendung
No conviene para niños menores de tres años.
Peligro de atrangamiento - Partes pequeñas
Se requiere ensamblaje por un adulto
Conservar las instrucciones para uso futuro
Non adatto a bambini di età inferiore a 3 anni
Rischio di soffocamente - Piccole parti
Richiesto assemblaggio da parte di un adulto
Conservare le istruzioni per un uso future
Inte lämplig för barn under tre år
Kvävningsrisk - Små delar
Montering av en vuxen krävs
Behåll användarmanualen för framtida bruk
Ikke egnet til børn under 3 år
Kvælningsfare - Små dele
Skal samles af en voksen
Gem brugervejledningen til fremtidig reference
Go to the BERG toys channel on
for installation instruction video’s
www.youtube.com/bergtoys
1x1 1x2
1x3 1x4 1x5
1x6 1x7 1x8
4x18 1x19 1x20 1x21
2x13 4x14 1x15 1x16 1x17
1x9 1x10 2x11 2x12
3x22
R
3
Go to the BERG toys channel on
for installation instruction video’s
www.youtube.com/bergtoys
1x1 1x2
1x3 1x4 1x5
1x6 1x7 1x8
4x18 1x19 1x20 1x21
2x13 4x14 1x15 1x16 1x17
1x9 1x10 2x11 2x12
3x22
R
4
1x2
1x1
1
2
1x5
3
4
5
1x2
1x1
1
2
1x5
3
4
6
5
6
7
8
7
5
6
7
8
8
1x8
9
10
4x14 2x11 2x12
11
12
9
1x8
9
10
4x14 2x11 2x12
11
12
10
13
14
2x13
15
16
11
13
14
2x13
15
16
12
1x7
1x4
17
18
1x17
19
20
13
1x7
1x4
17
18
1x17
19
20
14
4x18
1x10
1x3
21
22
L
1x91x6
1x161x15
R
23
24
15
4x18
1x10
1x3
21
22
L
1x91x6
1x161x15
R
23
24
16
ENEN
Introduction
Congratulations on your purchase of a BERG go-kart.
BERG strives to design and produce robust and safe products. Your choice for a BERG product means
you have chosen a product that will give years of pleasure. Because of the continuous development of
our products we retain the right to change product specications without giving any notice.
Read the manual carefully for the required safety and maintenance instructions.
The BERG product has a long life span, but will need some maintenance from time to time. You will nd
the instructions for maintenance in this User's Manual. People who keep this in mind are guaranteed
of a hardwearing toy that will last for many years.
Visit our homepage at www.bergtoys.com to nd out more about BERG and see our products and
accessories. You are warmly invited to send an e-mail to BERG, with your suggestions for improvement
and other experiences. You can send these to info@bergtoys.com.
Content
1. Warnings
2. User guidelines
2.1 Safety
2.2 User instructions
2.2.1 Before Use
2.2.2 During use
2.2.3 Trailer
2.2.4 Brakes
2.3 Restrictions for use
2.4 Accessories
2.5 Disposal and recycling information
3. Maintenance
3.1 Maintenance scheme
3.2 Maintenance activities
3.2.1. Frame
3.2.2. Wheels / Tires
3.2.3. Steering
3.2.4. Chain
3.2.5. Plastic Parts
3.2.6. Crank adjustment
3.2.7. Hub gear tuning
4. Warranty
4.1 Warranty period
4.2 Warranty regulation
17
EN
EN
1. Warnings
Adult supervision required.
This product may not be used on public roads.
Do not turn sharp when driving with high speed. The go-kart can tip!
Store the product in a dry and moisture free environment.
This product contains non-rechargeable batteries.
Only use the prescribed batteries.
Dierent types of batteries or new and used batteries may not be mixed.
Batteries have to be inserted with the polarity (+ / -) on the correct side.
Never short circuit the battery of the toy.
Exhausted batteries have to be removed from the toy.
Be aware of loose hanging pieces of clothing such as scarves and shoelaces. These can become
entangled in moving parts, which can lead to accidents.
Never ride if you are under the inuence of alcohol, drugs or medicines that can negatively aect
your reaction time or powers of observation.
2. User guidelines
BERG or the dealer cannot be held responsible for improper use of this product. Read these guidelines
before use to properly and safely use this product. BERG cannot be held responsible for any omissions
in this manual.
2.1 Safety
Children (under 12) may only use the product under the guidance of an adult. Always pay attention
to the highest possible safety measures. If you have questions or are not sure of something, then visit
your local dealer or contact BERG.
2.2 User instructions
Only use your BERG product as instructed below. Any unauthorized use could result in serious injuries
to the user and/or the product.
2.2.1 Before Use
Adjust the seat and steering wheel to the correct position, according to the size of the user.
Make sure the steering, brakes and tires are functioning correctly and the bolts and nuts are xed.
Protective covers, which have been removed for maintenance purposes, should always be put
back in the original state before use.
Check if the tire pressures meet the safety norms as shown on the tire. The function of the brake
and the steering depend on these being correct.
The adult is responsible for instructing the child how to operate this product.
Make sure the electrical parts are intact and functioning correctly.
2.2.2 During use
Ride at a suitable speed where you have control.
Always pay attention to the environment.
Brake the product always using the handbrake / back pedal brake.
Do not operate the electrical parts while driving. Steering the go-kart using only one hand could
result in accidents and injuries.
Always ride on a smooth surface without obstacles.
Wearing protective gear is not mandatory but in the interest of safety it is advised.
18
ENEN
Make sure that the product cannot run away when the product is parked. This is possible by using
the parking brake.
Do not place any unnecessary objects on or against the steering. Make sure that the steering
always functions properly.
2.2.3 Trailer
If a trailer is connected to the go-kart, you must remember that the braking distance will be longer.
The trailers from BERG may not be hooked on the go-kart while standing on steep slopes. No people
are allowed in the trailer. For the maximum load weight for the trailer please refer to the trailer User's
Guide.
2.2.4 Brakes
The go-kart is equipped with a special hub. With this hub it is possible while riding forwards to pedal
backwards so that the braking function in the rear wheel comes into action. While doing so, the brake
function is being operated. Besides that it is also possible to ride backwards.
2.3 Restrictions for use
Protect the product from moisture, do not use outside when its raining.
This product may not be used on public roads.
Do not ride backwards at great speeds. Doing this could make you lose control.
Collisions or other stunts increase the chance of injury to both the user and the product and are
not allowed.
Avoid contact with moving parts while riding the product.
Do not get on or o the product while it is moving.
Do not overload the product. Maximum user weight is 60 kg.
Never ride in the dark without lights.
Do not ride across a slope (rather than up or down) and make sharp turns during high speed, there
is a risk the product can tip over.
Going downhill considerably increases your speed and accidents can occur. The braking distance
will also be longer! It is not allowed to use this product on hills or slopes (up and downhill).
2.4 Accessories
Only original BERG accessories may be used. BERG has a range of accessories with which you can
adapt the go-kart entirely to your own wishes. You can nd all the accessories at
www.bergtoys.com.
For correct use and installation of an accessory please refer to the accompanying manual.
All accessories should be assembled by an adult and supervised by an adult during use.
2.5 Disposal and recycling information
This product must be disposed separately from the ordinary household wastes at its end of life because
it contains batteries and electrical parts. For information about where to recycle contact your local
waste disposal authority or the retailer where you bought the product.
19
EN
EN
3. Maintenance
Some maintenance is necessary in order to use the BERG product and have fun with it for a long time.
This chapter describes how, how often, and which maintenance must be carried out.
3.1 Maintenance scheme
Daily Monthly Half Yearly Yearly
Wheels / Tires
Check for wear
Check the tire pres-
sure and if neces-
sary increase the
pressure.
Frame
Clean and check all
nuts and bolts.
Check the frame
for any cracks and
fractures.
Driving Mechanism
Check chain for
correct tension.
Chain greasing.
Check for sand or
dirt and clean if
necessary.
Check and tighten
bolts.
Steering
Check all nuts and
bolts.
Lubricate the mov-
ing parts.
Clean and oil the
chains.
Check all screws and
bolts.
Check for sand or
dirt and clean if
necessary.
Driving Mechanism
Check for correct
functioning of
bearings, chain, hub,
sprockets and axles.
Plastic parts
Clean the plastic
parts and check
damage
Plastic Parts
Clean the plastic
parts and check for
damage.
3.2 Maintenance activities
3.2.1 Frame
The frame is powder-coated or black zinc plated. To prevent rust forming it is important to not
keep the pedal go-kart outside for a long time during rain and clean the frame regularly. If you
want to conserve the frame with grease, only use acid free substances. You can treat damaged
areas with paint.
Check the bolts and nuts for rust and replace them to prevent them from breaking which can cause
injuries.
3.2.2 Wheels / Tires
Regularly check the rims and tires for any damage (for example cuts, cracks and bulges). Attention:
damaged rims and tires can lead to accidents! The tires must not come into contact with oil, grease
or fuel.
20
ENEN
The correct tire pressure is shown on the outside of the tire. If the tires are at the correct pressure
the product will be light and easy to handle. If the pressure is too low, the tires will leak quicker and
will suer excessive wear and tear. If the tire pressure is too high, the tire can for example come
loose from the rim, resulting in dangerous situations. Attention: remember that in bright sunlight
and at high temperatures the tire pressure increases! The tires must not come into contact with oil,
grease or fuel. Make sure that the valve caps are always tted on the valves.
Incorrect tire pressure will negatively aect the functionality and safety of the hand brake and
parking brake. The brake bar is designed to function optimally at the correct tire pressure.
3.2.3 Steering
The steering equipment must be checked every month for the following:
Damage, rust, wear and tear.
All the nuts and bolts must be tightened.
Check if the front wheels are properly aligned. If necessary, adjust according to attached scheme.
3.2.4 Chain
The go-kart has a driving mechanism with two chains.
Make sure that the chains are suciently oiled so that they can travel freely .
If a chain is too tightly tensioned, the product will be more dicult to pedal and there is a big chance
that wear and tear of the chain and sprocket, among other things, will occur faster. If a chain is not
tight enough, the chain can easily come o the sprocket, or there is a chance of damage to the chain
housing.
When both chains must be tensioned, always begin with the rear/short chain.
To tension the rear chain:
Remove the protective hood.
Loosen the nuts of the hub.
Tension the chain by moving the hub forwards.
Make sure that the hub remains exactly parallel to the rear axle.
Tighten the hub nuts again.
The chain has the correct tension if the middle can be pushed 6 millimeters downwards.
Tensioning the front chain:
Loosen the bolts of the crank axle at the bottom of the frame.
Tension the chain by turning the tensioning nut clockwise.
Tighten the bolts again. It must be possible to push the middle of the chain downwards by 1
centimeter. Check this before you install the protective hood back in its place.
Install the protective hood back in its place.
X
X+5 mm
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84

BERG Rally Användarmanual

Typ
Användarmanual